| /* |
| * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) |
| * Ben. Herrenschmidt (benh@kernel.crashing.org) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * TODO: |
| * |
| * - Replace mdelay with some schedule loop if possible |
| * - Shorten some obfuscated delays on some routines (like modem |
| * power) |
| * - Refcount some clocks (see darwin) |
| * - Split split split... |
| * |
| */ |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/spinlock.h> |
| #include <linux/adb.h> |
| #include <linux/pmu.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <asm/sections.h> |
| #include <asm/errno.h> |
| #include <asm/ohare.h> |
| #include <asm/heathrow.h> |
| #include <asm/keylargo.h> |
| #include <asm/uninorth.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/machdep.h> |
| #include <asm/pmac_feature.h> |
| #include <asm/dbdma.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/pmac_low_i2c.h> |
| |
| #undef DEBUG_FEATURE |
| |
| #ifdef DEBUG_FEATURE |
| #define DBG(fmt...) printk(KERN_DEBUG fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| #ifdef CONFIG_6xx |
| extern int powersave_lowspeed; |
| #endif |
| |
| extern int powersave_nap; |
| extern struct device_node *k2_skiplist[2]; |
| |
| /* |
| * We use a single global lock to protect accesses. Each driver has |
| * to take care of its own locking |
| */ |
| DEFINE_SPINLOCK(feature_lock); |
| |
| #define LOCK(flags) spin_lock_irqsave(&feature_lock, flags); |
| #define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags); |
| |
| |
| /* |
| * Instance of some macio stuffs |
| */ |
| struct macio_chip macio_chips[MAX_MACIO_CHIPS]; |
| |
| struct macio_chip *macio_find(struct device_node *child, int type) |
| { |
| while(child) { |
| int i; |
| |
| for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++) |
| if (child == macio_chips[i].of_node && |
| (!type || macio_chips[i].type == type)) |
| return &macio_chips[i]; |
| child = child->parent; |
| } |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(macio_find); |
| |
| static const char *macio_names[] = |
| { |
| "Unknown", |
| "Grand Central", |
| "OHare", |
| "OHareII", |
| "Heathrow", |
| "Gatwick", |
| "Paddington", |
| "Keylargo", |
| "Pangea", |
| "Intrepid", |
| "K2", |
| "Shasta", |
| }; |
| |
| |
| struct device_node *uninorth_node; |
| u32 __iomem *uninorth_base; |
| |
| static u32 uninorth_rev; |
| static int uninorth_maj; |
| static void __iomem *u3_ht_base; |
| |
| /* |
| * For each motherboard family, we have a table of functions pointers |
| * that handle the various features. |
| */ |
| |
| typedef long (*feature_call)(struct device_node *node, long param, long value); |
| |
| struct feature_table_entry { |
| unsigned int selector; |
| feature_call function; |
| }; |
| |
| struct pmac_mb_def |
| { |
| const char* model_string; |
| const char* model_name; |
| int model_id; |
| struct feature_table_entry* features; |
| unsigned long board_flags; |
| }; |
| static struct pmac_mb_def pmac_mb; |
| |
| /* |
| * Here are the chip specific feature functions |
| */ |
| |
| static inline int simple_feature_tweak(struct device_node *node, int type, |
| int reg, u32 mask, int value) |
| { |
| struct macio_chip* macio; |
| unsigned long flags; |
| |
| macio = macio_find(node, type); |
| if (!macio) |
| return -ENODEV; |
| LOCK(flags); |
| if (value) |
| MACIO_BIS(reg, mask); |
| else |
| MACIO_BIC(reg, mask); |
| (void)MACIO_IN32(reg); |
| UNLOCK(flags); |
| |
| return 0; |
| } |
| |
| #ifndef CONFIG_POWER4 |
| |
| static long ohare_htw_scc_enable(struct device_node *node, long param, |
| long value) |
| { |
| struct macio_chip* macio; |
| unsigned long chan_mask; |
| unsigned long fcr; |
| unsigned long flags; |
| int htw, trans; |
| unsigned long rmask; |
| |
| macio = macio_find(node, 0); |
| if (!macio) |
| return -ENODEV; |
| if (!strcmp(node->name, "ch-a")) |
| chan_mask = MACIO_FLAG_SCCA_ON; |
| else if (!strcmp(node->name, "ch-b")) |
| chan_mask = MACIO_FLAG_SCCB_ON; |
| else |
| return -ENODEV; |
| |
| htw = (macio->type == macio_heathrow || macio->type == macio_paddington |
| || macio->type == macio_gatwick); |
| /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */ |
| trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && |
| pmac_mb.model_id != PMAC_TYPE_YIKES); |
| if (value) { |
| #ifdef CONFIG_ADB_PMU |
| if ((param & 0xfff) == PMAC_SCC_IRDA) |
| pmu_enable_irled(1); |
| #endif /* CONFIG_ADB_PMU */ |
| LOCK(flags); |
| fcr = MACIO_IN32(OHARE_FCR); |
| /* Check if scc cell need enabling */ |
| if (!(fcr & OH_SCC_ENABLE)) { |
| fcr |= OH_SCC_ENABLE; |
| if (htw) { |
| /* Side effect: this will also power up the |
| * modem, but it's too messy to figure out on which |
| * ports this controls the tranceiver and on which |
| * it controls the modem |
| */ |
| if (trans) |
| fcr &= ~HRW_SCC_TRANS_EN_N; |
| MACIO_OUT32(OHARE_FCR, fcr); |
| fcr |= (rmask = HRW_RESET_SCC); |
| MACIO_OUT32(OHARE_FCR, fcr); |
| } else { |
| fcr |= (rmask = OH_SCC_RESET); |
| MACIO_OUT32(OHARE_FCR, fcr); |
| } |
| UNLOCK(flags); |
| (void)MACIO_IN32(OHARE_FCR); |
| mdelay(15); |
| LOCK(flags); |
| fcr &= ~rmask; |
| MACIO_OUT32(OHARE_FCR, fcr); |
| } |
| if (chan_mask & MACIO_FLAG_SCCA_ON) |
| fcr |= OH_SCCA_IO; |
| if (chan_mask & MACIO_FLAG_SCCB_ON) |
| fcr |= OH_SCCB_IO; |
| MACIO_OUT32(OHARE_FCR, fcr); |
| macio->flags |= chan_mask; |
| UNLOCK(flags); |
| if (param & PMAC_SCC_FLAG_XMON) |
| macio->flags |= MACIO_FLAG_SCC_LOCKED; |
| } else { |
| if (macio->flags & MACIO_FLAG_SCC_LOCKED) |
| return -EPERM; |
| LOCK(flags); |
| fcr = MACIO_IN32(OHARE_FCR); |
| if (chan_mask & MACIO_FLAG_SCCA_ON) |
| fcr &= ~OH_SCCA_IO; |
| if (chan_mask & MACIO_FLAG_SCCB_ON) |
| fcr &= ~OH_SCCB_IO; |
| MACIO_OUT32(OHARE_FCR, fcr); |
| if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) { |
| fcr &= ~OH_SCC_ENABLE; |
| if (htw && trans) |
| fcr |= HRW_SCC_TRANS_EN_N; |
| MACIO_OUT32(OHARE_FCR, fcr); |
| } |
| macio->flags &= ~(chan_mask); |
| UNLOCK(flags); |
| mdelay(10); |
| #ifdef CONFIG_ADB_PMU |
| if ((param & 0xfff) == PMAC_SCC_IRDA) |
| pmu_enable_irled(0); |
| #endif /* CONFIG_ADB_PMU */ |
| } |
| return 0; |
| } |
| |
| static long ohare_floppy_enable(struct device_node *node, long param, |
| long value) |
| { |
| return simple_feature_tweak(node, macio_ohare, |
| OHARE_FCR, OH_FLOPPY_ENABLE, value); |
| } |
| |
| static long ohare_mesh_enable(struct device_node *node, long param, long value) |
| { |
| return simple_feature_tweak(node, macio_ohare, |
| OHARE_FCR, OH_MESH_ENABLE, value); |
| } |
| |
| static long ohare_ide_enable(struct device_node *node, long param, long value) |
| { |
| switch(param) { |
| case 0: |
| /* For some reason, setting the bit in set_initial_features() |
| * doesn't stick. I'm still investigating... --BenH. |
| */ |
| if (value) |
| simple_feature_tweak(node, macio_ohare, |
| OHARE_FCR, OH_IOBUS_ENABLE, 1); |
| return simple_feature_tweak(node, macio_ohare, |
| OHARE_FCR, OH_IDE0_ENABLE, value); |
| case 1: |
| return simple_feature_tweak(node, macio_ohare, |
| OHARE_FCR, OH_BAY_IDE_ENABLE, value); |
| default: |
| return -ENODEV; |
| } |
| } |
| |
| static long ohare_ide_reset(struct device_node *node, long param, long value) |
| { |
| switch(param) { |
| case 0: |
| return simple_feature_tweak(node, macio_ohare, |
| OHARE_FCR, OH_IDE0_RESET_N, !value); |
| case 1: |
| return simple_feature_tweak(node, macio_ohare, |
| OHARE_FCR, OH_IDE1_RESET_N, !value); |
| default: |
| return -ENODEV; |
| } |
| } |
| |
| static long ohare_sleep_state(struct device_node *node, long param, long value) |
| { |
| struct macio_chip* macio = &macio_chips[0]; |
| |
| if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) |
| return -EPERM; |
| if (value == 1) { |
| MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE); |
| } else if (value == 0) { |
| MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); |
| } |
| |
| return 0; |
| } |
| |
| static long heathrow_modem_enable(struct device_node *node, long param, |
| long value) |
| { |
| struct macio_chip* macio; |
| u8 gpio; |
| unsigned long flags; |
| |
| macio = macio_find(node, macio_unknown); |
| if (!macio) |
| return -ENODEV; |
| gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1; |
| if (!value) { |
| LOCK(flags); |
| MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); |
| UNLOCK(flags); |
| (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); |
| mdelay(250); |
| } |
| if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && |
| pmac_mb.model_id != PMAC_TYPE_YIKES) { |
| LOCK(flags); |
| if (value) |
| MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); |
| else |
| MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); |
| UNLOCK(flags); |
| (void)MACIO_IN32(HEATHROW_FCR); |
| mdelay(250); |
| } |
| if (value) { |
| LOCK(flags); |
| MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); |
| (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); |
| UNLOCK(flags); mdelay(250); LOCK(flags); |
| MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); |
| (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); |
| UNLOCK(flags); mdelay(250); LOCK(flags); |
| MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); |
| (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); |
| UNLOCK(flags); mdelay(250); |
| } |
| return 0; |
| } |
| |
| static long heathrow_floppy_enable(struct device_node *node, long param, |
| long value) |
| { |
| return simple_feature_tweak(node, macio_unknown, |
| HEATHROW_FCR, |
| HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE, |
| value); |
| } |
| |
| static long heathrow_mesh_enable(struct device_node *node, long param, |
| long value) |
| { |
| struct macio_chip* macio; |
| unsigned long flags; |
| |
| macio = macio_find(node, macio_unknown); |
| if (!macio) |
| return -ENODEV; |
| LOCK(flags); |
| /* Set clear mesh cell enable */ |
| if (value) |
| MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE); |
| else |
| MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE); |
| (void)MACIO_IN32(HEATHROW_FCR); |
| udelay(10); |
| /* Set/Clear termination power */ |
| if (value) |
| MACIO_BIC(HEATHROW_MBCR, 0x04000000); |
| else |
| MACIO_BIS(HEATHROW_MBCR, 0x04000000); |
| (void)MACIO_IN32(HEATHROW_MBCR); |
| udelay(10); |
| UNLOCK(flags); |
| |
| return 0; |
| } |
| |
| static long heathrow_ide_enable(struct device_node *node, long param, |
| long value) |
| { |
| switch(param) { |
| case 0: |
| return simple_feature_tweak(node, macio_unknown, |
| HEATHROW_FCR, HRW_IDE0_ENABLE, value); |
| case 1: |
| return simple_feature_tweak(node, macio_unknown, |
| HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value); |
| default: |
| return -ENODEV; |
| } |
| } |
| |
| static long heathrow_ide_reset(struct device_node *node, long param, |
| long value) |
| { |
| switch(param) { |
| case 0: |
| return simple_feature_tweak(node, macio_unknown, |
| HEATHROW_FCR, HRW_IDE0_RESET_N, !value); |
| case 1: |
| return simple_feature_tweak(node, macio_unknown, |
| HEATHROW_FCR, HRW_IDE1_RESET_N, !value); |
| default: |
| return -ENODEV; |
| } |
| } |
| |
| static long heathrow_bmac_enable(struct device_node *node, long param, |
| long value) |
| { |
| struct macio_chip* macio; |
| unsigned long flags; |
| |
| macio = macio_find(node, 0); |
| if (!macio) |
| return -ENODEV; |
| if (value) { |
| LOCK(flags); |
| MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); |
| MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET); |
| UNLOCK(flags); |
| (void)MACIO_IN32(HEATHROW_FCR); |
| mdelay(10); |
| LOCK(flags); |
| MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET); |
| UNLOCK(flags); |
| (void)MACIO_IN32(HEATHROW_FCR); |
| mdelay(10); |
| } else { |
| LOCK(flags); |
| MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); |
| UNLOCK(flags); |
| } |
| return 0; |
| } |
| |
| static long heathrow_sound_enable(struct device_node *node, long param, |
| long value) |
| { |
| struct macio_chip* macio; |
| unsigned long flags; |
| |
| /* B&W G3 and Yikes don't support that properly (the |
| * sound appear to never come back after beeing shut down). |
| */ |
| if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE || |
| pmac_mb.model_id == PMAC_TYPE_YIKES) |
| return 0; |
| |
| macio = macio_find(node, 0); |
| if (!macio) |
| return -ENODEV; |
| if (value) { |
| LOCK(flags); |
| MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); |
| MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); |
| UNLOCK(flags); |
| (void)MACIO_IN32(HEATHROW_FCR); |
| } else { |
| LOCK(flags); |
| MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); |
| MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); |
| UNLOCK(flags); |
| } |
| return 0; |
| } |
| |
| static u32 save_fcr[6]; |
| static u32 save_mbcr; |
| static struct dbdma_regs save_dbdma[13]; |
| static struct dbdma_regs save_alt_dbdma[13]; |
| |
| static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save) |
| { |
| int i; |
| |
| /* Save state & config of DBDMA channels */ |
| for (i = 0; i < 13; i++) { |
| volatile struct dbdma_regs __iomem * chan = (void __iomem *) |
| (macio->base + ((0x8000+i*0x100)>>2)); |
| save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi); |
| save[i].cmdptr = in_le32(&chan->cmdptr); |
| save[i].intr_sel = in_le32(&chan->intr_sel); |
| save[i].br_sel = in_le32(&chan->br_sel); |
| save[i].wait_sel = in_le32(&chan->wait_sel); |
| } |
| } |
| |
| static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save) |
| { |
| int i; |
| |
| /* Save state & config of DBDMA channels */ |
| for (i = 0; i < 13; i++) { |
| volatile struct dbdma_regs __iomem * chan = (void __iomem *) |
| (macio->base + ((0x8000+i*0x100)>>2)); |
| out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16); |
| while (in_le32(&chan->status) & ACTIVE) |
| mb(); |
| out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi); |
| out_le32(&chan->cmdptr, save[i].cmdptr); |
| out_le32(&chan->intr_sel, save[i].intr_sel); |
| out_le32(&chan->br_sel, save[i].br_sel); |
| out_le32(&chan->wait_sel, save[i].wait_sel); |
| } |
| } |
| |
| static void heathrow_sleep(struct macio_chip *macio, int secondary) |
| { |
| if (secondary) { |
| dbdma_save(macio, save_alt_dbdma); |
| save_fcr[2] = MACIO_IN32(0x38); |
| save_fcr[3] = MACIO_IN32(0x3c); |
| } else { |
| dbdma_save(macio, save_dbdma); |
| save_fcr[0] = MACIO_IN32(0x38); |
| save_fcr[1] = MACIO_IN32(0x3c); |
| save_mbcr = MACIO_IN32(0x34); |
| /* Make sure sound is shut down */ |
| MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); |
| MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); |
| /* This seems to be necessary as well or the fan |
| * keeps coming up and battery drains fast */ |
| MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE); |
| MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N); |
| /* Make sure eth is down even if module or sleep |
| * won't work properly */ |
| MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET); |
| } |
| /* Make sure modem is shut down */ |
| MACIO_OUT8(HRW_GPIO_MODEM_RESET, |
| MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1); |
| MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); |
| MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE); |
| |
| /* Let things settle */ |
| (void)MACIO_IN32(HEATHROW_FCR); |
| } |
| |
| static void heathrow_wakeup(struct macio_chip *macio, int secondary) |
| { |
| if (secondary) { |
| MACIO_OUT32(0x38, save_fcr[2]); |
| (void)MACIO_IN32(0x38); |
| mdelay(1); |
| MACIO_OUT32(0x3c, save_fcr[3]); |
| (void)MACIO_IN32(0x38); |
| mdelay(10); |
| dbdma_restore(macio, save_alt_dbdma); |
| } else { |
| MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE); |
| (void)MACIO_IN32(0x38); |
| mdelay(1); |
| MACIO_OUT32(0x3c, save_fcr[1]); |
| (void)MACIO_IN32(0x38); |
| mdelay(1); |
| MACIO_OUT32(0x34, save_mbcr); |
| (void)MACIO_IN32(0x38); |
| mdelay(10); |
| dbdma_restore(macio, save_dbdma); |
| } |
| } |
| |
| static long heathrow_sleep_state(struct device_node *node, long param, |
| long value) |
| { |
| if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) |
| return -EPERM; |
| if (value == 1) { |
| if (macio_chips[1].type == macio_gatwick) |
| heathrow_sleep(&macio_chips[0], 1); |
| heathrow_sleep(&macio_chips[0], 0); |
| } else if (value == 0) { |
| heathrow_wakeup(&macio_chips[0], 0); |
| if (macio_chips[1].type == macio_gatwick) |
| heathrow_wakeup(&macio_chips[0], 1); |
| } |
| return 0; |
| } |
| |
| static long core99_scc_enable(struct device_node *node, long param, long value) |
| { |
| struct macio_chip* macio; |
| unsigned long flags; |
| unsigned long chan_mask; |
| u32 fcr; |
| |
| macio = macio_find(node, 0); |
| if (!macio) |
| return -ENODEV; |
| if (!strcmp(node->name, "ch-a")) |
| chan_mask = MACIO_FLAG_SCCA_ON; |
| else if (!strcmp(node->name, "ch-b")) |
| chan_mask = MACIO_FLAG_SCCB_ON; |
| else |
| return -ENODEV; |
| |
| if (value) { |
| int need_reset_scc = 0; |
| int need_reset_irda = 0; |
| |
| LOCK(flags); |
| fcr = MACIO_IN32(KEYLARGO_FCR0); |
| /* Check if scc cell need enabling */ |
| if (!(fcr & KL0_SCC_CELL_ENABLE)) { |
| fcr |= KL0_SCC_CELL_ENABLE; |
| need_reset_scc = 1; |
| } |
| if (chan_mask & MACIO_FLAG_SCCA_ON) { |
| fcr |= KL0_SCCA_ENABLE; |
| /* Don't enable line drivers for I2S modem */ |
| if ((param & 0xfff) == PMAC_SCC_I2S1) |
| fcr &= ~KL0_SCC_A_INTF_ENABLE; |
| else |
| fcr |= KL0_SCC_A_INTF_ENABLE; |
| } |
| if (chan_mask & MACIO_FLAG_SCCB_ON) { |
| fcr |= KL0_SCCB_ENABLE; |
| /* Perform irda specific inits */ |
| if ((param & 0xfff) == PMAC_SCC_IRDA) { |
| fcr &= ~KL0_SCC_B_INTF_ENABLE; |
| fcr |= KL0_IRDA_ENABLE; |
| fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE; |
| fcr |= KL0_IRDA_SOURCE1_SEL; |
| fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); |
| fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); |
| need_reset_irda = 1; |
| } else |
| fcr |= KL0_SCC_B_INTF_ENABLE; |
| } |
| MACIO_OUT32(KEYLARGO_FCR0, fcr); |
| macio->flags |= chan_mask; |
| if (need_reset_scc) { |
| MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET); |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| UNLOCK(flags); |
| mdelay(15); |
| LOCK(flags); |
| MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET); |
| } |
| if (need_reset_irda) { |
| MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET); |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| UNLOCK(flags); |
| mdelay(15); |
| LOCK(flags); |
| MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET); |
| } |
| UNLOCK(flags); |
| if (param & PMAC_SCC_FLAG_XMON) |
| macio->flags |= MACIO_FLAG_SCC_LOCKED; |
| } else { |
| if (macio->flags & MACIO_FLAG_SCC_LOCKED) |
| return -EPERM; |
| LOCK(flags); |
| fcr = MACIO_IN32(KEYLARGO_FCR0); |
| if (chan_mask & MACIO_FLAG_SCCA_ON) |
| fcr &= ~KL0_SCCA_ENABLE; |
| if (chan_mask & MACIO_FLAG_SCCB_ON) { |
| fcr &= ~KL0_SCCB_ENABLE; |
| /* Perform irda specific clears */ |
| if ((param & 0xfff) == PMAC_SCC_IRDA) { |
| fcr &= ~KL0_IRDA_ENABLE; |
| fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE); |
| fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); |
| fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); |
| } |
| } |
| MACIO_OUT32(KEYLARGO_FCR0, fcr); |
| if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) { |
| fcr &= ~KL0_SCC_CELL_ENABLE; |
| MACIO_OUT32(KEYLARGO_FCR0, fcr); |
| } |
| macio->flags &= ~(chan_mask); |
| UNLOCK(flags); |
| mdelay(10); |
| } |
| return 0; |
| } |
| |
| static long |
| core99_modem_enable(struct device_node *node, long param, long value) |
| { |
| struct macio_chip* macio; |
| u8 gpio; |
| unsigned long flags; |
| |
| /* Hack for internal USB modem */ |
| if (node == NULL) { |
| if (macio_chips[0].type != macio_keylargo) |
| return -ENODEV; |
| node = macio_chips[0].of_node; |
| } |
| macio = macio_find(node, 0); |
| if (!macio) |
| return -ENODEV; |
| gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); |
| gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; |
| gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; |
| |
| if (!value) { |
| LOCK(flags); |
| MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); |
| UNLOCK(flags); |
| (void)MACIO_IN8(KL_GPIO_MODEM_RESET); |
| mdelay(250); |
| } |
| LOCK(flags); |
| if (value) { |
| MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); |
| UNLOCK(flags); |
| (void)MACIO_IN32(KEYLARGO_FCR2); |
| mdelay(250); |
| } else { |
| MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); |
| UNLOCK(flags); |
| } |
| if (value) { |
| LOCK(flags); |
| MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); |
| (void)MACIO_IN8(KL_GPIO_MODEM_RESET); |
| UNLOCK(flags); mdelay(250); LOCK(flags); |
| MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); |
| (void)MACIO_IN8(KL_GPIO_MODEM_RESET); |
| UNLOCK(flags); mdelay(250); LOCK(flags); |
| MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); |
| (void)MACIO_IN8(KL_GPIO_MODEM_RESET); |
| UNLOCK(flags); mdelay(250); |
| } |
| return 0; |
| } |
| |
| static long |
| pangea_modem_enable(struct device_node *node, long param, long value) |
| { |
| struct macio_chip* macio; |
| u8 gpio; |
| unsigned long flags; |
| |
| /* Hack for internal USB modem */ |
| if (node == NULL) { |
| if (macio_chips[0].type != macio_pangea && |
| macio_chips[0].type != macio_intrepid) |
| return -ENODEV; |
| node = macio_chips[0].of_node; |
| } |
| macio = macio_find(node, 0); |
| if (!macio) |
| return -ENODEV; |
| gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); |
| gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; |
| gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; |
| |
| if (!value) { |
| LOCK(flags); |
| MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); |
| UNLOCK(flags); |
| (void)MACIO_IN8(KL_GPIO_MODEM_RESET); |
| mdelay(250); |
| } |
| LOCK(flags); |
| if (value) { |
| MACIO_OUT8(KL_GPIO_MODEM_POWER, |
| KEYLARGO_GPIO_OUTPUT_ENABLE); |
| UNLOCK(flags); |
| (void)MACIO_IN32(KEYLARGO_FCR2); |
| mdelay(250); |
| } else { |
| MACIO_OUT8(KL_GPIO_MODEM_POWER, |
| KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); |
| UNLOCK(flags); |
| } |
| if (value) { |
| LOCK(flags); |
| MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); |
| (void)MACIO_IN8(KL_GPIO_MODEM_RESET); |
| UNLOCK(flags); mdelay(250); LOCK(flags); |
| MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); |
| (void)MACIO_IN8(KL_GPIO_MODEM_RESET); |
| UNLOCK(flags); mdelay(250); LOCK(flags); |
| MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); |
| (void)MACIO_IN8(KL_GPIO_MODEM_RESET); |
| UNLOCK(flags); mdelay(250); |
| } |
| return 0; |
| } |
| |
| static long |
| core99_ata100_enable(struct device_node *node, long value) |
| { |
| unsigned long flags; |
| struct pci_dev *pdev = NULL; |
| u8 pbus, pid; |
| int rc; |
| |
| if (uninorth_rev < 0x24) |
| return -ENODEV; |
| |
| LOCK(flags); |
| if (value) |
| UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); |
| else |
| UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); |
| (void)UN_IN(UNI_N_CLOCK_CNTL); |
| UNLOCK(flags); |
| udelay(20); |
| |
| if (value) { |
| if (pci_device_from_OF_node(node, &pbus, &pid) == 0) |
| pdev = pci_get_bus_and_slot(pbus, pid); |
| if (pdev == NULL) |
| return 0; |
| rc = pci_enable_device(pdev); |
| if (rc == 0) |
| pci_set_master(pdev); |
| pci_dev_put(pdev); |
| if (rc) |
| return rc; |
| } |
| return 0; |
| } |
| |
| static long |
| core99_ide_enable(struct device_node *node, long param, long value) |
| { |
| /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2 |
| * based ata-100 |
| */ |
| switch(param) { |
| case 0: |
| return simple_feature_tweak(node, macio_unknown, |
| KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value); |
| case 1: |
| return simple_feature_tweak(node, macio_unknown, |
| KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value); |
| case 2: |
| return simple_feature_tweak(node, macio_unknown, |
| KEYLARGO_FCR1, KL1_UIDE_ENABLE, value); |
| case 3: |
| return core99_ata100_enable(node, value); |
| default: |
| return -ENODEV; |
| } |
| } |
| |
| static long |
| core99_ide_reset(struct device_node *node, long param, long value) |
| { |
| switch(param) { |
| case 0: |
| return simple_feature_tweak(node, macio_unknown, |
| KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value); |
| case 1: |
| return simple_feature_tweak(node, macio_unknown, |
| KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value); |
| case 2: |
| return simple_feature_tweak(node, macio_unknown, |
| KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value); |
| default: |
| return -ENODEV; |
| } |
| } |
| |
| static long |
| core99_gmac_enable(struct device_node *node, long param, long value) |
| { |
| unsigned long flags; |
| |
| LOCK(flags); |
| if (value) |
| UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); |
| else |
| UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); |
| (void)UN_IN(UNI_N_CLOCK_CNTL); |
| UNLOCK(flags); |
| udelay(20); |
| |
| return 0; |
| } |
| |
| static long |
| core99_gmac_phy_reset(struct device_node *node, long param, long value) |
| { |
| unsigned long flags; |
| struct macio_chip *macio; |
| |
| macio = &macio_chips[0]; |
| if (macio->type != macio_keylargo && macio->type != macio_pangea && |
| macio->type != macio_intrepid) |
| return -ENODEV; |
| |
| LOCK(flags); |
| MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE); |
| (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET); |
| UNLOCK(flags); |
| mdelay(10); |
| LOCK(flags); |
| MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */ |
| KEYLARGO_GPIO_OUTOUT_DATA); |
| UNLOCK(flags); |
| mdelay(10); |
| |
| return 0; |
| } |
| |
| static long |
| core99_sound_chip_enable(struct device_node *node, long param, long value) |
| { |
| struct macio_chip* macio; |
| unsigned long flags; |
| |
| macio = macio_find(node, 0); |
| if (!macio) |
| return -ENODEV; |
| |
| /* Do a better probe code, screamer G4 desktops & |
| * iMacs can do that too, add a recalibrate in |
| * the driver as well |
| */ |
| if (pmac_mb.model_id == PMAC_TYPE_PISMO || |
| pmac_mb.model_id == PMAC_TYPE_TITANIUM) { |
| LOCK(flags); |
| if (value) |
| MACIO_OUT8(KL_GPIO_SOUND_POWER, |
| KEYLARGO_GPIO_OUTPUT_ENABLE | |
| KEYLARGO_GPIO_OUTOUT_DATA); |
| else |
| MACIO_OUT8(KL_GPIO_SOUND_POWER, |
| KEYLARGO_GPIO_OUTPUT_ENABLE); |
| (void)MACIO_IN8(KL_GPIO_SOUND_POWER); |
| UNLOCK(flags); |
| } |
| return 0; |
| } |
| |
| static long |
| core99_airport_enable(struct device_node *node, long param, long value) |
| { |
| struct macio_chip* macio; |
| unsigned long flags; |
| int state; |
| |
| macio = macio_find(node, 0); |
| if (!macio) |
| return -ENODEV; |
| |
| /* Hint: we allow passing of macio itself for the sake of the |
| * sleep code |
| */ |
| if (node != macio->of_node && |
| (!node->parent || node->parent != macio->of_node)) |
| return -ENODEV; |
| state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0; |
| if (value == state) |
| return 0; |
| if (value) { |
| /* This code is a reproduction of OF enable-cardslot |
| * and init-wireless methods, slightly hacked until |
| * I got it working. |
| */ |
| LOCK(flags); |
| MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5); |
| (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); |
| UNLOCK(flags); |
| mdelay(10); |
| LOCK(flags); |
| MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4); |
| (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); |
| UNLOCK(flags); |
| |
| mdelay(10); |
| |
| LOCK(flags); |
| MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); |
| (void)MACIO_IN32(KEYLARGO_FCR2); |
| udelay(10); |
| MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0); |
| (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb); |
| udelay(10); |
| MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28); |
| (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa); |
| udelay(10); |
| MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28); |
| (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd); |
| udelay(10); |
| MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28); |
| (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd); |
| udelay(10); |
| MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28); |
| (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe); |
| UNLOCK(flags); |
| udelay(10); |
| MACIO_OUT32(0x1c000, 0); |
| mdelay(1); |
| MACIO_OUT8(0x1a3e0, 0x41); |
| (void)MACIO_IN8(0x1a3e0); |
| udelay(10); |
| LOCK(flags); |
| MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16); |
| (void)MACIO_IN32(KEYLARGO_FCR2); |
| UNLOCK(flags); |
| mdelay(100); |
| |
| macio->flags |= MACIO_FLAG_AIRPORT_ON; |
| } else { |
| LOCK(flags); |
| MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); |
| (void)MACIO_IN32(KEYLARGO_FCR2); |
| MACIO_OUT8(KL_GPIO_AIRPORT_0, 0); |
| MACIO_OUT8(KL_GPIO_AIRPORT_1, 0); |
| MACIO_OUT8(KL_GPIO_AIRPORT_2, 0); |
| MACIO_OUT8(KL_GPIO_AIRPORT_3, 0); |
| MACIO_OUT8(KL_GPIO_AIRPORT_4, 0); |
| (void)MACIO_IN8(KL_GPIO_AIRPORT_4); |
| UNLOCK(flags); |
| |
| macio->flags &= ~MACIO_FLAG_AIRPORT_ON; |
| } |
| return 0; |
| } |
| |
| #ifdef CONFIG_SMP |
| static long |
| core99_reset_cpu(struct device_node *node, long param, long value) |
| { |
| unsigned int reset_io = 0; |
| unsigned long flags; |
| struct macio_chip *macio; |
| struct device_node *np; |
| struct device_node *cpus; |
| const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0, |
| KL_GPIO_RESET_CPU1, |
| KL_GPIO_RESET_CPU2, |
| KL_GPIO_RESET_CPU3 }; |
| |
| macio = &macio_chips[0]; |
| if (macio->type != macio_keylargo) |
| return -ENODEV; |
| |
| cpus = of_find_node_by_path("/cpus"); |
| if (cpus == NULL) |
| return -ENODEV; |
| for (np = cpus->child; np != NULL; np = np->sibling) { |
| const u32 *num = of_get_property(np, "reg", NULL); |
| const u32 *rst = of_get_property(np, "soft-reset", NULL); |
| if (num == NULL || rst == NULL) |
| continue; |
| if (param == *num) { |
| reset_io = *rst; |
| break; |
| } |
| } |
| of_node_put(cpus); |
| if (np == NULL || reset_io == 0) |
| reset_io = dflt_reset_lines[param]; |
| |
| LOCK(flags); |
| MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); |
| (void)MACIO_IN8(reset_io); |
| udelay(1); |
| MACIO_OUT8(reset_io, 0); |
| (void)MACIO_IN8(reset_io); |
| UNLOCK(flags); |
| |
| return 0; |
| } |
| #endif /* CONFIG_SMP */ |
| |
| static long |
| core99_usb_enable(struct device_node *node, long param, long value) |
| { |
| struct macio_chip *macio; |
| unsigned long flags; |
| const char *prop; |
| int number; |
| u32 reg; |
| |
| macio = &macio_chips[0]; |
| if (macio->type != macio_keylargo && macio->type != macio_pangea && |
| macio->type != macio_intrepid) |
| return -ENODEV; |
| |
| prop = of_get_property(node, "AAPL,clock-id", NULL); |
| if (!prop) |
| return -ENODEV; |
| if (strncmp(prop, "usb0u048", 8) == 0) |
| number = 0; |
| else if (strncmp(prop, "usb1u148", 8) == 0) |
| number = 2; |
| else if (strncmp(prop, "usb2u248", 8) == 0) |
| number = 4; |
| else |
| return -ENODEV; |
| |
| /* Sorry for the brute-force locking, but this is only used during |
| * sleep and the timing seem to be critical |
| */ |
| LOCK(flags); |
| if (value) { |
| /* Turn ON */ |
| if (number == 0) { |
| MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| UNLOCK(flags); |
| mdelay(1); |
| LOCK(flags); |
| MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); |
| } else if (number == 2) { |
| MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); |
| UNLOCK(flags); |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| mdelay(1); |
| LOCK(flags); |
| MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); |
| } else if (number == 4) { |
| MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); |
| UNLOCK(flags); |
| (void)MACIO_IN32(KEYLARGO_FCR1); |
| mdelay(1); |
| LOCK(flags); |
| MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE); |
| } |
| if (number < 4) { |
| reg = MACIO_IN32(KEYLARGO_FCR4); |
| reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | |
| KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number)); |
| reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | |
| KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1)); |
| MACIO_OUT32(KEYLARGO_FCR4, reg); |
| (void)MACIO_IN32(KEYLARGO_FCR4); |
| udelay(10); |
| } else { |
| reg = MACIO_IN32(KEYLARGO_FCR3); |
| reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | |
| KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0)); |
| reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | |
| KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1)); |
| MACIO_OUT32(KEYLARGO_FCR3, reg); |
| (void)MACIO_IN32(KEYLARGO_FCR3); |
| udelay(10); |
| } |
| if (macio->type == macio_intrepid) { |
| /* wait for clock stopped bits to clear */ |
| u32 test0 = 0, test1 = 0; |
| u32 status0, status1; |
| int timeout = 1000; |
| |
| UNLOCK(flags); |
| switch (number) { |
| case 0: |
| test0 = UNI_N_CLOCK_STOPPED_USB0; |
| test1 = UNI_N_CLOCK_STOPPED_USB0PCI; |
| break; |
| case 2: |
| test0 = UNI_N_CLOCK_STOPPED_USB1; |
| test1 = UNI_N_CLOCK_STOPPED_USB1PCI; |
| break; |
| case 4: |
| test0 = UNI_N_CLOCK_STOPPED_USB2; |
| test1 = UNI_N_CLOCK_STOPPED_USB2PCI; |
| break; |
| } |
| do { |
| if (--timeout <= 0) { |
| printk(KERN_ERR "core99_usb_enable: " |
| "Timeout waiting for clocks\n"); |
| break; |
| } |
| mdelay(1); |
| status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0); |
| status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1); |
| } while ((status0 & test0) | (status1 & test1)); |
| LOCK(flags); |
| } |
| } else { |
| /* Turn OFF */ |
| if (number < 4) { |
| reg = MACIO_IN32(KEYLARGO_FCR4); |
| reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | |
| KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number); |
| reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | |
| KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1); |
| MACIO_OUT32(KEYLARGO_FCR4, reg); |
| (void)MACIO_IN32(KEYLARGO_FCR4); |
| udelay(1); |
| } else { |
| reg = MACIO_IN32(KEYLARGO_FCR3); |
| reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | |
| KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0); |
| reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | |
| KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1); |
| MACIO_OUT32(KEYLARGO_FCR3, reg); |
| (void)MACIO_IN32(KEYLARGO_FCR3); |
| udelay(1); |
| } |
| if (number == 0) { |
| if (macio->type != macio_intrepid) |
| MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| udelay(1); |
| MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| } else if (number == 2) { |
| if (macio->type != macio_intrepid) |
| MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| udelay(1); |
| MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| } else if (number == 4) { |
| udelay(1); |
| MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); |
| (void)MACIO_IN32(KEYLARGO_FCR1); |
| } |
| udelay(1); |
| } |
| UNLOCK(flags); |
| |
| return 0; |
| } |
| |
| static long |
| core99_firewire_enable(struct device_node *node, long param, long value) |
| { |
| unsigned long flags; |
| struct macio_chip *macio; |
| |
| macio = &macio_chips[0]; |
| if (macio->type != macio_keylargo && macio->type != macio_pangea && |
| macio->type != macio_intrepid) |
| return -ENODEV; |
| if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) |
| return -ENODEV; |
| |
| LOCK(flags); |
| if (value) { |
| UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); |
| (void)UN_IN(UNI_N_CLOCK_CNTL); |
| } else { |
| UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); |
| (void)UN_IN(UNI_N_CLOCK_CNTL); |
| } |
| UNLOCK(flags); |
| mdelay(1); |
| |
| return 0; |
| } |
| |
| static long |
| core99_firewire_cable_power(struct device_node *node, long param, long value) |
| { |
| unsigned long flags; |
| struct macio_chip *macio; |
| |
| /* Trick: we allow NULL node */ |
| if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0) |
| return -ENODEV; |
| macio = &macio_chips[0]; |
| if (macio->type != macio_keylargo && macio->type != macio_pangea && |
| macio->type != macio_intrepid) |
| return -ENODEV; |
| if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) |
| return -ENODEV; |
| |
| LOCK(flags); |
| if (value) { |
| MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0); |
| MACIO_IN8(KL_GPIO_FW_CABLE_POWER); |
| udelay(10); |
| } else { |
| MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4); |
| MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10); |
| } |
| UNLOCK(flags); |
| mdelay(1); |
| |
| return 0; |
| } |
| |
| static long |
| intrepid_aack_delay_enable(struct device_node *node, long param, long value) |
| { |
| unsigned long flags; |
| |
| if (uninorth_rev < 0xd2) |
| return -ENODEV; |
| |
| LOCK(flags); |
| if (param) |
| UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); |
| else |
| UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); |
| UNLOCK(flags); |
| |
| return 0; |
| } |
| |
| |
| #endif /* CONFIG_POWER4 */ |
| |
| static long |
| core99_read_gpio(struct device_node *node, long param, long value) |
| { |
| struct macio_chip *macio = &macio_chips[0]; |
| |
| return MACIO_IN8(param); |
| } |
| |
| |
| static long |
| core99_write_gpio(struct device_node *node, long param, long value) |
| { |
| struct macio_chip *macio = &macio_chips[0]; |
| |
| MACIO_OUT8(param, (u8)(value & 0xff)); |
| return 0; |
| } |
| |
| #ifdef CONFIG_POWER4 |
| static long g5_gmac_enable(struct device_node *node, long param, long value) |
| { |
| struct macio_chip *macio = &macio_chips[0]; |
| unsigned long flags; |
| |
| if (node == NULL) |
| return -ENODEV; |
| |
| LOCK(flags); |
| if (value) { |
| MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); |
| mb(); |
| k2_skiplist[0] = NULL; |
| } else { |
| k2_skiplist[0] = node; |
| mb(); |
| MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); |
| } |
| |
| UNLOCK(flags); |
| mdelay(1); |
| |
| return 0; |
| } |
| |
| static long g5_fw_enable(struct device_node *node, long param, long value) |
| { |
| struct macio_chip *macio = &macio_chips[0]; |
| unsigned long flags; |
| |
| if (node == NULL) |
| return -ENODEV; |
| |
| LOCK(flags); |
| if (value) { |
| MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); |
| mb(); |
| k2_skiplist[1] = NULL; |
| } else { |
| k2_skiplist[1] = node; |
| mb(); |
| MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); |
| } |
| |
| UNLOCK(flags); |
| mdelay(1); |
| |
| return 0; |
| } |
| |
| static long g5_mpic_enable(struct device_node *node, long param, long value) |
| { |
| unsigned long flags; |
| struct device_node *parent = of_get_parent(node); |
| int is_u3; |
| |
| if (parent == NULL) |
| return 0; |
| is_u3 = strcmp(parent->name, "u3") == 0 || |
| strcmp(parent->name, "u4") == 0; |
| of_node_put(parent); |
| if (!is_u3) |
| return 0; |
| |
| LOCK(flags); |
| UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE); |
| UNLOCK(flags); |
| |
| return 0; |
| } |
| |
| static long g5_eth_phy_reset(struct device_node *node, long param, long value) |
| { |
| struct macio_chip *macio = &macio_chips[0]; |
| struct device_node *phy; |
| int need_reset; |
| |
| /* |
| * We must not reset the combo PHYs, only the BCM5221 found in |
| * the iMac G5. |
| */ |
| phy = of_get_next_child(node, NULL); |
| if (!phy) |
| return -ENODEV; |
| need_reset = of_device_is_compatible(phy, "B5221"); |
| of_node_put(phy); |
| if (!need_reset) |
| return 0; |
| |
| /* PHY reset is GPIO 29, not in device-tree unfortunately */ |
| MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, |
| KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); |
| /* Thankfully, this is now always called at a time when we can |
| * schedule by sungem. |
| */ |
| msleep(10); |
| MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0); |
| |
| return 0; |
| } |
| |
| static long g5_i2s_enable(struct device_node *node, long param, long value) |
| { |
| /* Very crude implementation for now */ |
| struct macio_chip *macio = &macio_chips[0]; |
| unsigned long flags; |
| int cell; |
| u32 fcrs[3][3] = { |
| { 0, |
| K2_FCR1_I2S0_CELL_ENABLE | |
| K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE, |
| KL3_I2S0_CLK18_ENABLE |
| }, |
| { KL0_SCC_A_INTF_ENABLE, |
| K2_FCR1_I2S1_CELL_ENABLE | |
| K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE, |
| KL3_I2S1_CLK18_ENABLE |
| }, |
| { KL0_SCC_B_INTF_ENABLE, |
| SH_FCR1_I2S2_CELL_ENABLE | |
| SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE, |
| SH_FCR3_I2S2_CLK18_ENABLE |
| }, |
| }; |
| |
| if (macio->type != macio_keylargo2 && macio->type != macio_shasta) |
| return -ENODEV; |
| if (strncmp(node->name, "i2s-", 4)) |
| return -ENODEV; |
| cell = node->name[4] - 'a'; |
| switch(cell) { |
| case 0: |
| case 1: |
| break; |
| case 2: |
| if (macio->type == macio_shasta) |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| LOCK(flags); |
| if (value) { |
| MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]); |
| MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]); |
| MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]); |
| } else { |
| MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]); |
| MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]); |
| MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]); |
| } |
| udelay(10); |
| UNLOCK(flags); |
| |
| return 0; |
| } |
| |
| |
| #ifdef CONFIG_SMP |
| static long g5_reset_cpu(struct device_node *node, long param, long value) |
| { |
| unsigned int reset_io = 0; |
| unsigned long flags; |
| struct macio_chip *macio; |
| struct device_node *np; |
| struct device_node *cpus; |
| |
| macio = &macio_chips[0]; |
| if (macio->type != macio_keylargo2 && macio->type != macio_shasta) |
| return -ENODEV; |
| |
| cpus = of_find_node_by_path("/cpus"); |
| if (cpus == NULL) |
| return -ENODEV; |
| for (np = cpus->child; np != NULL; np = np->sibling) { |
| const u32 *num = of_get_property(np, "reg", NULL); |
| const u32 *rst = of_get_property(np, "soft-reset", NULL); |
| if (num == NULL || rst == NULL) |
| continue; |
| if (param == *num) { |
| reset_io = *rst; |
| break; |
| } |
| } |
| of_node_put(cpus); |
| if (np == NULL || reset_io == 0) |
| return -ENODEV; |
| |
| LOCK(flags); |
| MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); |
| (void)MACIO_IN8(reset_io); |
| udelay(1); |
| MACIO_OUT8(reset_io, 0); |
| (void)MACIO_IN8(reset_io); |
| UNLOCK(flags); |
| |
| return 0; |
| } |
| #endif /* CONFIG_SMP */ |
| |
| /* |
| * This can be called from pmac_smp so isn't static |
| * |
| * This takes the second CPU off the bus on dual CPU machines |
| * running UP |
| */ |
| void g5_phy_disable_cpu1(void) |
| { |
| if (uninorth_maj == 3) |
| UN_OUT(U3_API_PHY_CONFIG_1, 0); |
| } |
| #endif /* CONFIG_POWER4 */ |
| |
| #ifndef CONFIG_POWER4 |
| |
| |
| #ifdef CONFIG_PM |
| static u32 save_gpio_levels[2]; |
| static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT]; |
| static u8 save_gpio_normal[KEYLARGO_GPIO_CNT]; |
| static u32 save_unin_clock_ctl; |
| |
| static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode) |
| { |
| u32 temp; |
| |
| if (sleep_mode) { |
| mdelay(1); |
| MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND); |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| mdelay(1); |
| } |
| |
| MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | |
| KL0_SCC_CELL_ENABLE | |
| KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE | |
| KL0_IRDA_CLK19_ENABLE); |
| |
| MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK); |
| MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE); |
| |
| MACIO_BIC(KEYLARGO_FCR1, |
| KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | |
| KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | |
| KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | |
| KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | |
| KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | |
| KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N | |
| KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N | |
| KL1_UIDE_ENABLE); |
| |
| MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); |
| MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE); |
| |
| temp = MACIO_IN32(KEYLARGO_FCR3); |
| if (macio->rev >= 2) { |
| temp |= KL3_SHUTDOWN_PLL2X; |
| if (sleep_mode) |
| temp |= KL3_SHUTDOWN_PLL_TOTAL; |
| } |
| |
| temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | |
| KL3_SHUTDOWN_PLLKW35; |
| if (sleep_mode) |
| temp |= KL3_SHUTDOWN_PLLKW12; |
| temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
| | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); |
| if (sleep_mode) |
| temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE); |
| MACIO_OUT32(KEYLARGO_FCR3, temp); |
| |
| /* Flush posted writes & wait a bit */ |
| (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); |
| } |
| |
| static void pangea_shutdown(struct macio_chip *macio, int sleep_mode) |
| { |
| u32 temp; |
| |
| MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | |
| KL0_SCC_CELL_ENABLE | |
| KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE); |
| |
| MACIO_BIC(KEYLARGO_FCR1, |
| KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | |
| KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | |
| KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | |
| KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | |
| KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | |
| KL1_UIDE_ENABLE); |
| if (pmac_mb.board_flags & PMAC_MB_MOBILE) |
| MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); |
| |
| MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); |
| |
| temp = MACIO_IN32(KEYLARGO_FCR3); |
| temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | |
| KL3_SHUTDOWN_PLLKW35; |
| temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE |
| | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE); |
| if (sleep_mode) |
| temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE); |
| MACIO_OUT32(KEYLARGO_FCR3, temp); |
| |
| /* Flush posted writes & wait a bit */ |
| (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); |
| } |
| |
| static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode) |
| { |
| u32 temp; |
| |
| MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | |
| KL0_SCC_CELL_ENABLE); |
| |
| MACIO_BIC(KEYLARGO_FCR1, |
| KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | |
| KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | |
| KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | |
| KL1_EIDE0_ENABLE); |
| if (pmac_mb.board_flags & PMAC_MB_MOBILE) |
| MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); |
| |
| temp = MACIO_IN32(KEYLARGO_FCR3); |
| temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | |
| KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); |
| if (sleep_mode) |
| temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE); |
| MACIO_OUT32(KEYLARGO_FCR3, temp); |
| |
| /* Flush posted writes & wait a bit */ |
| (void)MACIO_IN32(KEYLARGO_FCR0); |
| mdelay(10); |
| } |
| |
| |
| static int |
| core99_sleep(void) |
| { |
| struct macio_chip *macio; |
| int i; |
| |
| macio = &macio_chips[0]; |
| if (macio->type != macio_keylargo && macio->type != macio_pangea && |
| macio->type != macio_intrepid) |
| return -ENODEV; |
| |
| /* We power off the wireless slot in case it was not done |
| * by the driver. We don't power it on automatically however |
| */ |
| if (macio->flags & MACIO_FLAG_AIRPORT_ON) |
| core99_airport_enable(macio->of_node, 0, 0); |
| |
| /* We power off the FW cable. Should be done by the driver... */ |
| if (macio->flags & MACIO_FLAG_FW_SUPPORTED) { |
| core99_firewire_enable(NULL, 0, 0); |
| core99_firewire_cable_power(NULL, 0, 0); |
| } |
| |
| /* We make sure int. modem is off (in case driver lost it) */ |
| if (macio->type == macio_keylargo) |
| core99_modem_enable(macio->of_node, 0, 0); |
| else |
| pangea_modem_enable(macio->of_node, 0, 0); |
| |
| /* We make sure the sound is off as well */ |
| core99_sound_chip_enable(macio->of_node, 0, 0); |
| |
| /* |
| * Save various bits of KeyLargo |
| */ |
| |
| /* Save the state of the various GPIOs */ |
| save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0); |
| save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1); |
| for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) |
| save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i); |
| for (i=0; i<KEYLARGO_GPIO_CNT; i++) |
| save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i); |
| |
| /* Save the FCRs */ |
| if (macio->type == macio_keylargo) |
| save_mbcr = MACIO_IN32(KEYLARGO_MBCR); |
| save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0); |
| save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1); |
| save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2); |
| save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3); |
| save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4); |
| if (macio->type == macio_pangea || macio->type == macio_intrepid) |
| save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5); |
| |
| /* Save state & config of DBDMA channels */ |
| dbdma_save(macio, save_dbdma); |
| |
| /* |
| * Turn off as much as we can |
| */ |
| if (macio->type == macio_pangea) |
| pangea_shutdown(macio, 1); |
| else if (macio->type == macio_intrepid) |
| intrepid_shutdown(macio, 1); |
| else if (macio->type == macio_keylargo) |
| keylargo_shutdown(macio, 1); |
| |
| /* |
| * Put the host bridge to sleep |
| */ |
| |
| save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL); |
| /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it |
| * enabled ! |
| */ |
| UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl & |
| ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/)); |
| udelay(100); |
| UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); |
| UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP); |
| mdelay(10); |
| |
| /* |
| * FIXME: A bit of black magic with OpenPIC (don't ask me why) |
| */ |
| if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { |
| MACIO_BIS(0x506e0, 0x00400000); |
| MACIO_BIS(0x506e0, 0x80000000); |
| } |
| return 0; |
| } |
| |
| static int |
| core99_wake_up(void) |
| { |
| struct macio_chip *macio; |
| int i; |
| |
| macio = &macio_chips[0]; |
| if (macio->type != macio_keylargo && macio->type != macio_pangea && |
| macio->type != macio_intrepid) |
| return -ENODEV; |
| |
| /* |
| * Wakeup the host bridge |
| */ |
| UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); |
| udelay(10); |
| UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); |
| udelay(10); |
| |
| /* |
| * Restore KeyLargo |
| */ |
| |
| if (macio->type == macio_keylargo) { |
| MACIO_OUT32(KEYLARGO_MBCR, save_mbcr); |
| (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10); |
| } |
| MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]); |
| (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10); |
| MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]); |
| (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10); |
| MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]); |
| (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10); |
| MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]); |
| (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10); |
| MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]); |
| (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10); |
| if (macio->type == macio_pangea || macio->type == macio_intrepid) { |
| MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]); |
| (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10); |
| } |
| |
| dbdma_restore(macio, save_dbdma); |
| |
| MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]); |
| MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]); |
| for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) |
| MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]); |
| for (i=0; i<KEYLARGO_GPIO_CNT; i++) |
| MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]); |
| |
| /* FIXME more black magic with OpenPIC ... */ |
| if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { |
| MACIO_BIC(0x506e0, 0x00400000); |
| MACIO_BIC(0x506e0, 0x80000000); |
| } |
| |
| UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl); |
| udelay(100); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_PM */ |
| |
| static long |
| core99_sleep_state(struct device_node *node, long param, long value) |
| { |
| /* Param == 1 means to enter the "fake sleep" mode that is |
| * used for CPU speed switch |
| */ |
| if (param == 1) { |
| if (value == 1) { |
| UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); |
| UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2); |
| } else { |
| UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); |
| udelay(10); |
| UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); |
| udelay(10); |
| } |
| return 0; |
| } |
| if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) |
| return -EPERM; |
| |
| #ifdef CONFIG_PM |
| if (value == 1) |
| return core99_sleep(); |
| else if (value == 0) |
| return core99_wake_up(); |
| |
| #endif /* CONFIG_PM */ |
| return 0; |
| } |
| |
| #endif /* CONFIG_POWER4 */ |
| |
| static long |
| generic_dev_can_wake(struct device_node *node, long param, long value) |
| { |
| /* Todo: eventually check we are really dealing with on-board |
| * video device ... |
| */ |
| |
| if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP) |
| pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP; |
| return 0; |
| } |
| |
| static long generic_get_mb_info(struct device_node *node, long param, long value) |
| { |
| switch(param) { |
| case PMAC_MB_INFO_MODEL: |
| return pmac_mb.model_id; |
| case PMAC_MB_INFO_FLAGS: |
| return pmac_mb.board_flags; |
| case PMAC_MB_INFO_NAME: |
| /* hack hack hack... but should work */ |
| *((const char **)value) = pmac_mb.model_name; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| |
| /* |
| * Table definitions |
| */ |
| |
| /* Used on any machine |
| */ |
| static struct feature_table_entry any_features[] = { |
| { PMAC_FTR_GET_MB_INFO, generic_get_mb_info }, |
| { PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake }, |
| { 0, NULL } |
| }; |
| |
| #ifndef CONFIG_POWER4 |
| |
| /* OHare based motherboards. Currently, we only use these on the |
| * 2400,3400 and 3500 series powerbooks. Some older desktops seem |
| * to have issues with turning on/off those asic cells |
| */ |
| static struct feature_table_entry ohare_features[] = { |
| { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, |
| { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable }, |
| { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable }, |
| { PMAC_FTR_IDE_ENABLE, ohare_ide_enable}, |
| { PMAC_FTR_IDE_RESET, ohare_ide_reset}, |
| { PMAC_FTR_SLEEP_STATE, ohare_sleep_state }, |
| { 0, NULL } |
| }; |
| |
| /* Heathrow desktop machines (Beige G3). |
| * Separated as some features couldn't be properly tested |
| * and the serial port control bits appear to confuse it. |
| */ |
| static struct feature_table_entry heathrow_desktop_features[] = { |
| { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, |
| { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, |
| { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, |
| { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, |
| { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, |
| { 0, NULL } |
| }; |
| |
| /* Heathrow based laptop, that is the Wallstreet and mainstreet |
| * powerbooks. |
| */ |
| static struct feature_table_entry heathrow_laptop_features[] = { |
| { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, |
| { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, |
| { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, |
| { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, |
| { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, |
| { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, |
| { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, |
| { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, |
| { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, |
| { 0, NULL } |
| }; |
| |
| /* Paddington based machines |
| * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4. |
| */ |
| static struct feature_table_entry paddington_features[] = { |
| { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, |
| { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, |
| { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, |
| { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, |
| { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, |
| { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, |
| { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, |
| { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, |
| { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, |
| { 0, NULL } |
| }; |
| |
| /* Core99 & MacRISC 2 machines (all machines released since the |
| * iBook (included), that is all AGP machines, except pangea |
| * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo |
| * used on iBook2 & iMac "flow power". |
| */ |
| static struct feature_table_entry core99_features[] = { |
| { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, |
| { PMAC_FTR_MODEM_ENABLE, core99_modem_enable }, |
| { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, |
| { PMAC_FTR_IDE_RESET, core99_ide_reset }, |
| { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, |
| { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, |
| { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, |
| { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, |
| { PMAC_FTR_USB_ENABLE, core99_usb_enable }, |
| { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, |
| { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, |
| #ifdef CONFIG_PM |
| { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, |
| #endif |
| #ifdef CONFIG_SMP |
| { PMAC_FTR_RESET_CPU, core99_reset_cpu }, |
| #endif /* CONFIG_SMP */ |
| { PMAC_FTR_READ_GPIO, core99_read_gpio }, |
| { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, |
| { 0, NULL } |
| }; |
| |
| /* RackMac |
| */ |
| static struct feature_table_entry rackmac_features[] = { |
| { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, |
| { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, |
| { PMAC_FTR_IDE_RESET, core99_ide_reset }, |
| { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, |
| { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, |
| { PMAC_FTR_USB_ENABLE, core99_usb_enable }, |
| { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, |
| { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, |
| { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, |
| #ifdef CONFIG_SMP |
| { PMAC_FTR_RESET_CPU, core99_reset_cpu }, |
| #endif /* CONFIG_SMP */ |
| { PMAC_FTR_READ_GPIO, core99_read_gpio }, |
| { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, |
| { 0, NULL } |
| }; |
| |
| /* Pangea features |
| */ |
| static struct feature_table_entry pangea_features[] = { |
| { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, |
| { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, |
| { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, |
| { PMAC_FTR_IDE_RESET, core99_ide_reset }, |
| { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, |
| { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, |
| { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, |
| { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, |
| { PMAC_FTR_USB_ENABLE, core99_usb_enable }, |
| { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, |
| { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, |
| { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, |
| { PMAC_FTR_READ_GPIO, core99_read_gpio }, |
| { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, |
| { 0, NULL } |
| }; |
| |
| /* Intrepid features |
| */ |
| static struct feature_table_entry intrepid_features[] = { |
| { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, |
| { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, |
| { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, |
| { PMAC_FTR_IDE_RESET, core99_ide_reset }, |
| { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, |
| { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, |
| { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, |
| { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, |
| { PMAC_FTR_USB_ENABLE, core99_usb_enable }, |
| { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, |
| { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, |
| { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, |
| { PMAC_FTR_READ_GPIO, core99_read_gpio }, |
| { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, |
| { PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable }, |
| { 0, NULL } |
| }; |
| |
| #else /* CONFIG_POWER4 */ |
| |
| /* G5 features |
| */ |
| static struct feature_table_entry g5_features[] = { |
| { PMAC_FTR_GMAC_ENABLE, g5_gmac_enable }, |
| { PMAC_FTR_1394_ENABLE, g5_fw_enable }, |
| { PMAC_FTR_ENABLE_MPIC, g5_mpic_enable }, |
| { PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset }, |
| { PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable }, |
| #ifdef CONFIG_SMP |
| { PMAC_FTR_RESET_CPU, g5_reset_cpu }, |
| #endif /* CONFIG_SMP */ |
| { PMAC_FTR_READ_GPIO, core99_read_gpio }, |
| { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, |
| { 0, NULL } |
| }; |
| |
| #endif /* CONFIG_POWER4 */ |
| |
| static struct pmac_mb_def pmac_mb_defs[] = { |
| #ifndef CONFIG_POWER4 |
| /* |
| * Desktops |
| */ |
| |
| { "AAPL,8500", "PowerMac 8500/8600", |
| PMAC_TYPE_PSURGE, NULL, |
| 0 |
| }, |
| { "AAPL,9500", "PowerMac 9500/9600", |
| PMAC_TYPE_PSURGE, NULL, |
| 0 |
| }, |
| { "AAPL,7200", "PowerMac 7200", |
| PMAC_TYPE_PSURGE, NULL, |
| 0 |
| }, |
| { "AAPL,7300", "PowerMac 7200/7300", |
| PMAC_TYPE_PSURGE, NULL, |
| 0 |
| }, |
| { "AAPL,7500", "PowerMac 7500", |
| PMAC_TYPE_PSURGE, NULL, |
| 0 |
| }, |
| { "AAPL,ShinerESB", "Apple Network Server", |
| PMAC_TYPE_ANS, NULL, |
| 0 |
| }, |
| { "AAPL,e407", "Alchemy", |
| PMAC_TYPE_ALCHEMY, NULL, |
| 0 |
| }, |
| { "AAPL,e411", "Gazelle", |
| PMAC_TYPE_GAZELLE, NULL, |
| 0 |
| }, |
| { "AAPL,Gossamer", "PowerMac G3 (Gossamer)", |
| PMAC_TYPE_GOSSAMER, heathrow_desktop_features, |
| 0 |
| }, |
| { "AAPL,PowerMac G3", "PowerMac G3 (Silk)", |
| PMAC_TYPE_SILK, heathrow_desktop_features, |
| 0 |
| }, |
| { "PowerMac1,1", "Blue&White G3", |
| PMAC_TYPE_YOSEMITE, paddington_features, |
| 0 |
| }, |
| { "PowerMac1,2", "PowerMac G4 PCI Graphics", |
| PMAC_TYPE_YIKES, paddington_features, |
| 0 |
| }, |
| { "PowerMac2,1", "iMac FireWire", |
| PMAC_TYPE_FW_IMAC, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 |
| }, |
| { "PowerMac2,2", "iMac FireWire", |
| PMAC_TYPE_FW_IMAC, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 |
| }, |
| { "PowerMac3,1", "PowerMac G4 AGP Graphics", |
| PMAC_TYPE_SAWTOOTH, core99_features, |
| PMAC_MB_OLD_CORE99 |
| }, |
| { "PowerMac3,2", "PowerMac G4 AGP Graphics", |
| PMAC_TYPE_SAWTOOTH, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 |
| }, |
| { "PowerMac3,3", "PowerMac G4 AGP Graphics", |
| PMAC_TYPE_SAWTOOTH, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 |
| }, |
| { "PowerMac3,4", "PowerMac G4 Silver", |
| PMAC_TYPE_QUICKSILVER, core99_features, |
| PMAC_MB_MAY_SLEEP |
| }, |
| { "PowerMac3,5", "PowerMac G4 Silver", |
| PMAC_TYPE_QUICKSILVER, core99_features, |
| PMAC_MB_MAY_SLEEP |
| }, |
| { "PowerMac3,6", "PowerMac G4 Windtunnel", |
| PMAC_TYPE_WINDTUNNEL, core99_features, |
| PMAC_MB_MAY_SLEEP, |
| }, |
| { "PowerMac4,1", "iMac \"Flower Power\"", |
| PMAC_TYPE_PANGEA_IMAC, pangea_features, |
| PMAC_MB_MAY_SLEEP |
| }, |
| { "PowerMac4,2", "Flat panel iMac", |
| PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features, |
| PMAC_MB_CAN_SLEEP |
| }, |
| { "PowerMac4,4", "eMac", |
| PMAC_TYPE_EMAC, core99_features, |
| PMAC_MB_MAY_SLEEP |
| }, |
| { "PowerMac5,1", "PowerMac G4 Cube", |
| PMAC_TYPE_CUBE, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 |
| }, |
| { "PowerMac6,1", "Flat panel iMac", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP, |
| }, |
| { "PowerMac6,3", "Flat panel iMac", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP, |
| }, |
| { "PowerMac6,4", "eMac", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP, |
| }, |
| { "PowerMac10,1", "Mac mini", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP, |
| }, |
| { "iMac,1", "iMac (first generation)", |
| PMAC_TYPE_ORIG_IMAC, paddington_features, |
| 0 |
| }, |
| |
| /* |
| * Xserve's |
| */ |
| |
| { "RackMac1,1", "XServe", |
| PMAC_TYPE_RACKMAC, rackmac_features, |
| 0, |
| }, |
| { "RackMac1,2", "XServe rev. 2", |
| PMAC_TYPE_RACKMAC, rackmac_features, |
| 0, |
| }, |
| |
| /* |
| * Laptops |
| */ |
| |
| { "AAPL,3400/2400", "PowerBook 3400", |
| PMAC_TYPE_HOOPER, ohare_features, |
| PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE |
| }, |
| { "AAPL,3500", "PowerBook 3500", |
| PMAC_TYPE_KANGA, ohare_features, |
| PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE |
| }, |
| { "AAPL,PowerBook1998", "PowerBook Wallstreet", |
| PMAC_TYPE_WALLSTREET, heathrow_laptop_features, |
| PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE |
| }, |
| { "PowerBook1,1", "PowerBook 101 (Lombard)", |
| PMAC_TYPE_101_PBOOK, paddington_features, |
| PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE |
| }, |
| { "PowerBook2,1", "iBook (first generation)", |
| PMAC_TYPE_ORIG_IBOOK, core99_features, |
| PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE |
| }, |
| { "PowerBook2,2", "iBook FireWire", |
| PMAC_TYPE_FW_IBOOK, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | |
| PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE |
| }, |
| { "PowerBook3,1", "PowerBook Pismo", |
| PMAC_TYPE_PISMO, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | |
| PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE |
| }, |
| { "PowerBook3,2", "PowerBook Titanium", |
| PMAC_TYPE_TITANIUM, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE |
| }, |
| { "PowerBook3,3", "PowerBook Titanium II", |
| PMAC_TYPE_TITANIUM2, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE |
| }, |
| { "PowerBook3,4", "PowerBook Titanium III", |
| PMAC_TYPE_TITANIUM3, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE |
| }, |
| { "PowerBook3,5", "PowerBook Titanium IV", |
| PMAC_TYPE_TITANIUM4, core99_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE |
| }, |
| { "PowerBook4,1", "iBook 2", |
| PMAC_TYPE_IBOOK2, pangea_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE |
| }, |
| { "PowerBook4,2", "iBook 2", |
| PMAC_TYPE_IBOOK2, pangea_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE |
| }, |
| { "PowerBook4,3", "iBook 2 rev. 2", |
| PMAC_TYPE_IBOOK2, pangea_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE |
| }, |
| { "PowerBook5,1", "PowerBook G4 17\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook5,2", "PowerBook G4 15\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook5,3", "PowerBook G4 17\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook5,4", "PowerBook G4 15\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook5,5", "PowerBook G4 17\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook5,6", "PowerBook G4 15\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook5,7", "PowerBook G4 17\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook5,8", "PowerBook G4 15\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook5,9", "PowerBook G4 17\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook6,1", "PowerBook G4 12\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook6,2", "PowerBook G4", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook6,3", "iBook G4", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook6,4", "PowerBook G4 12\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook6,5", "iBook G4", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook6,7", "iBook G4", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| { "PowerBook6,8", "PowerBook G4 12\"", |
| PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, |
| PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, |
| }, |
| #else /* CONFIG_POWER4 */ |
| { "PowerMac7,2", "PowerMac G5", |
| PMAC_TYPE_POWERMAC_G5, g5_features, |
| 0, |
| }, |
| #ifdef CONFIG_PPC64 |
| { "PowerMac7,3", "PowerMac G5", |
| PMAC_TYPE_POWERMAC_G5, g5_features, |
| 0, |
| }, |
| { "PowerMac8,1", "iMac G5", |
| PMAC_TYPE_IMAC_G5, g5_features, |
| 0, |
| }, |
| { "PowerMac9,1", "PowerMac G5", |
| PMAC_TYPE_POWERMAC_G5_U3L, g5_features, |
| 0, |
| }, |
| { "PowerMac11,2", "PowerMac G5 Dual Core", |
| PMAC_TYPE_POWERMAC_G5_U3L, g5_features, |
| 0, |
| }, |
| { "PowerMac12,1", "iMac G5 (iSight)", |
| PMAC_TYPE_POWERMAC_G5_U3L, g5_features, |
| 0, |
| }, |
| { "RackMac3,1", "XServe G5", |
| PMAC_TYPE_XSERVE_G5, g5_features, |
| 0, |
| }, |
| #endif /* CONFIG_PPC64 */ |
| #endif /* CONFIG_POWER4 */ |
| }; |
| |
| /* |
| * The toplevel feature_call callback |
| */ |
| long pmac_do_feature_call(unsigned int selector, ...) |
| { |
| struct device_node *node; |
| long param, value; |
| int i; |
| feature_call func = NULL; |
| va_list args; |
| |
| if (pmac_mb.features) |
| for (i=0; pmac_mb.features[i].function; i++) |
| if (pmac_mb.features[i].selector == selector) { |
| func = pmac_mb.features[i].function; |
| break; |
| } |
| if (!func) |
| for (i=0; any_features[i].function; i++) |
| if (any_features[i].selector == selector) { |
| func = any_features[i].function; |
| break; |
| } |
| if (!func) |
| return -ENODEV; |
| |
| va_start(args, selector); |
| node = (struct device_node*)va_arg(args, void*); |
| param = va_arg(args, long); |
| value = va_arg(args, long); |
| va_end(args); |
| |
| return func(node, param, value); |
| } |
| |
| static int __init probe_motherboard(void) |
| { |
| int i; |
| struct macio_chip *macio = &macio_chips[0]; |
| const char *model = NULL; |
| struct device_node *dt; |
| int ret = 0; |
| |
| /* Lookup known motherboard type in device-tree. First try an |
| * exact match on the "model" property, then try a "compatible" |
| * match is none is found. |
| */ |
| dt = of_find_node_by_name(NULL, "device-tree"); |
| if (dt != NULL) |
| model = of_get_property(dt, "model", NULL); |
| for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) { |
| if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { |
| pmac_mb = pmac_mb_defs[i]; |
| goto found; |
| } |
| } |
| for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) { |
| if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) { |
| pmac_mb = pmac_mb_defs[i]; |
| goto found; |
| } |
| } |
| |
| /* Fallback to selection depending on mac-io chip type */ |
| switch(macio->type) { |
| #ifndef CONFIG_POWER4 |
| case macio_grand_central: |
| pmac_mb.model_id = PMAC_TYPE_PSURGE; |
| pmac_mb.model_name = "Unknown PowerSurge"; |
| break; |
| case macio_ohare: |
| pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE; |
| pmac_mb.model_name = "Unknown OHare-based"; |
| break; |
| case macio_heathrow: |
| pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW; |
| pmac_mb.model_name = "Unknown Heathrow-based"; |
| pmac_mb.features = heathrow_desktop_features; |
| break; |
| case macio_paddington: |
| pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON; |
| pmac_mb.model_name = "Unknown Paddington-based"; |
| pmac_mb.features = paddington_features; |
| break; |
| case macio_keylargo: |
| pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99; |
| pmac_mb.model_name = "Unknown Keylargo-based"; |
| pmac_mb.features = core99_features; |
| break; |
| case macio_pangea: |
| pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA; |
| pmac_mb.model_name = "Unknown Pangea-based"; |
| pmac_mb.features = pangea_features; |
| break; |
| case macio_intrepid: |
| pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID; |
| pmac_mb.model_name = "Unknown Intrepid-based"; |
| pmac_mb.features = intrepid_features; |
| break; |
| #else /* CONFIG_POWER4 */ |
| case macio_keylargo2: |
| pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; |
| pmac_mb.model_name = "Unknown K2-based"; |
| pmac_mb.features = g5_features; |
| break; |
| case macio_shasta: |
| pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA; |
| pmac_mb.model_name = "Unknown Shasta-based"; |
| pmac_mb.features = g5_features; |
| break; |
| #endif /* CONFIG_POWER4 */ |
| default: |
| ret = -ENODEV; |
| goto done; |
| } |
| found: |
| #ifndef CONFIG_POWER4 |
| /* Fixup Hooper vs. Comet */ |
| if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { |
| u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); |
| if (!mach_id_ptr) { |
| ret = -ENODEV; |
| goto done; |
| } |
| /* Here, I used to disable the media-bay on comet. It |
| * appears this is wrong, the floppy connector is actually |
| * a kind of media-bay and works with the current driver. |
| */ |
| if (__raw_readl(mach_id_ptr) & 0x20000000UL) |
| pmac_mb.model_id = PMAC_TYPE_COMET; |
| iounmap(mach_id_ptr); |
| } |
| |
| /* Set default value of powersave_nap on machines that support it. |
| * It appears that uninorth rev 3 has a problem with it, we don't |
| * enable it on those. In theory, the flush-on-lock property is |
| * supposed to be set when not supported, but I'm not very confident |
| * that all Apple OF revs did it properly, I do it the paranoid way. |
| */ |
| while (uninorth_base && uninorth_rev > 3) { |
| struct device_node *cpus = of_find_node_by_path("/cpus"); |
| struct device_node *np; |
| |
| if (!cpus || !cpus->child) { |
| printk(KERN_WARNING "Can't find CPU(s) in device tree !\n"); |
| of_node_put(cpus); |
| break; |
| } |
| np = cpus->child; |
| /* Nap mode not supported on SMP */ |
| if (np->sibling) { |
| of_node_put(cpus); |
| break; |
| } |
| /* Nap mode not supported if flush-on-lock property is present */ |
| if (of_get_property(np, "flush-on-lock", NULL)) { |
| of_node_put(cpus); |
| break; |
| } |
| of_node_put(cpus); |
| powersave_nap = 1; |
| printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n"); |
| break; |
| } |
| |
| /* On CPUs that support it (750FX), lowspeed by default during |
| * NAP mode |
| */ |
| powersave_lowspeed = 1; |
| |
| #else /* CONFIG_POWER4 */ |
| powersave_nap = 1; |
| #endif /* CONFIG_POWER4 */ |
| |
| /* Check for "mobile" machine */ |
| if (model && (strncmp(model, "PowerBook", 9) == 0 |
| || strncmp(model, "iBook", 5) == 0)) |
| pmac_mb.board_flags |= PMAC_MB_MOBILE; |
| |
| |
| printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); |
| done: |
| of_node_put(dt); |
| return ret; |
| } |
| |
| /* Initialize the Core99 UniNorth host bridge and memory controller |
| */ |
| static void __init probe_uninorth(void) |
| { |
| const u32 *addrp; |
| phys_addr_t address; |
| unsigned long actrl; |
| |
| /* Locate core99 Uni-N */ |
| uninorth_node = of_find_node_by_name(NULL, "uni-n"); |
| uninorth_maj = 1; |
| |
| /* Locate G5 u3 */ |
| if (uninorth_node == NULL) { |
| uninorth_node = of_find_node_by_name(NULL, "u3"); |
| uninorth_maj = 3; |
| } |
| /* Locate G5 u4 */ |
| if (uninorth_node == NULL) { |
| uninorth_node = of_find_node_by_name(NULL, "u4"); |
| uninorth_maj = 4; |
| } |
| if (uninorth_node == NULL) { |
| uninorth_maj = 0; |
| return; |
| } |
| |
| addrp = of_get_property(uninorth_node, "reg", NULL); |
| if (addrp == NULL) |
| return; |
| address = of_translate_address(uninorth_node, addrp); |
| if (address == 0) |
| return; |
| uninorth_base = ioremap(address, 0x40000); |
| if (uninorth_base == NULL) |
| return; |
| uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); |
| if (uninorth_maj == 3 || uninorth_maj == 4) { |
| u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); |
| if (u3_ht_base == NULL) { |
| iounmap(uninorth_base); |
| return; |
| } |
| } |
| |
| printk(KERN_INFO "Found %s memory controller & host bridge" |
| " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" : |
| uninorth_maj == 4 ? "U4" : "UniNorth", |
| (unsigned int)address, uninorth_rev); |
| printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); |
| |
| /* Set the arbitrer QAck delay according to what Apple does |
| */ |
| if (uninorth_rev < 0x11) { |
| actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK; |
| actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 : |
| UNI_N_ARB_CTRL_QACK_DELAY) << |
| UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; |
| UN_OUT(UNI_N_ARB_CTRL, actrl); |
| } |
| |
| /* Some more magic as done by them in recent MacOS X on UniNorth |
| * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI |
| * memory timeout |
| */ |
| if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || |
| uninorth_rev == 0xc0) |
| UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff); |
| } |
| |
| static void __init probe_one_macio(const char *name, const char *compat, int type) |
| { |
| struct device_node* node; |
| int i; |
| volatile u32 __iomem *base; |
| const u32 *addrp, *revp; |
| phys_addr_t addr; |
| u64 size; |
| |
| for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) { |
| if (!compat) |
| break; |
| if (of_device_is_compatible(node, compat)) |
| break; |
| } |
| if (!node) |
| return; |
| for(i=0; i<MAX_MACIO_CHIPS; i++) { |
| if (!macio_chips[i].of_node) |
| break; |
| if (macio_chips[i].of_node == node) |
| return; |
| } |
| |
| if (i >= MAX_MACIO_CHIPS) { |
| printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); |
| printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name); |
| return; |
| } |
| addrp = of_get_pci_address(node, 0, &size, NULL); |
| if (addrp == NULL) { |
| printk(KERN_ERR "pmac_feature: %s: can't find base !\n", |
| node->full_name); |
| return; |
| } |
| addr = of_translate_address(node, addrp); |
| if (addr == 0) { |
| printk(KERN_ERR "pmac_feature: %s, can't translate base !\n", |
| node->full_name); |
| return; |
| } |
| base = ioremap(addr, (unsigned long)size); |
| if (!base) { |
| printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n", |
| node->full_name); |
| return; |
| } |
| if (type == macio_keylargo || type == macio_keylargo2) { |
| const u32 *did = of_get_property(node, "device-id", NULL); |
| if (*did == 0x00000025) |
| type = macio_pangea; |
| if (*did == 0x0000003e) |
| type = macio_intrepid; |
| if (*did == 0x0000004f) |
| type = macio_shasta; |
| } |
| macio_chips[i].of_node = node; |
| macio_chips[i].type = type; |
| macio_chips[i].base = base; |
| macio_chips[i].flags = MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON; |
| macio_chips[i].name = macio_names[type]; |
| revp = of_get_property(node, "revision-id", NULL); |
| if (revp) |
| macio_chips[i].rev = *revp; |
| printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", |
| macio_names[type], macio_chips[i].rev, macio_chips[i].base); |
| } |
| |
| static int __init |
| probe_macios(void) |
| { |
| /* Warning, ordering is important */ |
| probe_one_macio("gc", NULL, macio_grand_central); |
| probe_one_macio("ohare", NULL, macio_ohare); |
| probe_one_macio("pci106b,7", NULL, macio_ohareII); |
| probe_one_macio("mac-io", "keylargo", macio_keylargo); |
| probe_one_macio("mac-io", "paddington", macio_paddington); |
| probe_one_macio("mac-io", "gatwick", macio_gatwick); |
| probe_one_macio("mac-io", "heathrow", macio_heathrow); |
| probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2); |
| |
| /* Make sure the "main" macio chip appear first */ |
| if (macio_chips[0].type == macio_gatwick |
| && macio_chips[1].type == macio_heathrow) { |
| struct macio_chip temp = macio_chips[0]; |
| macio_chips[0] = macio_chips[1]; |
| macio_chips[1] = temp; |
| } |
| if (macio_chips[0].type == macio_ohareII |
| && macio_chips[1].type == macio_ohare) { |
| struct macio_chip temp = macio_chips[0]; |
| macio_chips[0] = macio_chips[1]; |
| macio_chips[1] = temp; |
| } |
| macio_chips[0].lbus.index = 0; |
| macio_chips[1].lbus.index = 1; |
| |
| return (macio_chips[0].of_node == NULL) ? -ENODEV : 0; |
| } |
| |
| static void __init |
| initial_serial_shutdown(struct device_node *np) |
| { |
| int len; |
| const struct slot_names_prop { |
| int count; |
| char name[1]; |
| } *slots; |
| const char *conn; |
| int port_type = PMAC_SCC_ASYNC; |
| int modem = 0; |
| |
| slots = of_get_property(np, "slot-names", &len); |
| conn = of_get_property(np, "AAPL,connector", &len); |
| if (conn && (strcmp(conn, "infrared") == 0)) |
| port_type = PMAC_SCC_IRDA; |
| else if (of_device_is_compatible(np, "cobalt")) |
| modem = 1; |
| else if (slots && slots->count > 0) { |
| if (strcmp(slots->name, "IrDA") == 0) |
| port_type = PMAC_SCC_IRDA; |
| else if (strcmp(slots->name, "Modem") == 0) |
| modem = 1; |
| } |
| if (modem) |
| pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0); |
| pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0); |
| } |
| |
| static void __init |
| set_initial_features(void) |
| { |
| struct device_node *np; |
| |
| /* That hack appears to be necessary for some StarMax motherboards |
| * but I'm not too sure it was audited for side-effects on other |
| * ohare based machines... |
| * Since I still have difficulties figuring the right way to |
| * differenciate them all and since that hack was there for a long |
| * time, I'll keep it around |
| */ |
| if (macio_chips[0].type == macio_ohare) { |
| struct macio_chip *macio = &macio_chips[0]; |
| np = of_find_node_by_name(NULL, "via-pmu"); |
| if (np) |
| MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); |
| else |
| MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES); |
| of_node_put(np); |
| } else if (macio_chips[1].type == macio_ohare) { |
| struct macio_chip *macio = &macio_chips[1]; |
| MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); |
| } |
| |
| #ifdef CONFIG_POWER4 |
| if (macio_chips[0].type == macio_keylargo2 || |
| macio_chips[0].type == macio_shasta) { |
| #ifndef CONFIG_SMP |
| /* On SMP machines running UP, we have the second CPU eating |
| * bus cycles. We need to take it off the bus. This is done |
| * from pmac_smp for SMP kernels running on one CPU |
| */ |
| np = of_find_node_by_type(NULL, "cpu"); |
| if (np != NULL) |
| np = of_find_node_by_type(np, "cpu"); |
| if (np != NULL) { |
| g5_phy_disable_cpu1(); |
| of_node_put(np); |
| } |
| #endif /* CONFIG_SMP */ |
| /* Enable GMAC for now for PCI probing. It will be disabled |
| * later on after PCI probe |
| */ |
| np = of_find_node_by_name(NULL, "ethernet"); |
| while(np) { |
| if (of_device_is_compatible(np, "K2-GMAC")) |
| g5_gmac_enable(np, 0, 1); |
| np = of_find_node_by_name(np, "ethernet"); |
| } |
| |
| /* Enable FW before PCI probe. Will be disabled later on |
| * Note: We should have a batter way to check that we are |
| * dealing with uninorth internal cell and not a PCI cell |
| * on the external PCI. The code below works though. |
| */ |
| np = of_find_node_by_name(NULL, "firewire"); |
| while(np) { |
| if (of_device_is_compatible(np, "pci106b,5811")) { |
| macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; |
| g5_fw_enable(np, 0, 1); |
| } |
| np = of_find_node_by_name(np, "firewire"); |
| } |
| } |
| #else /* CONFIG_POWER4 */ |
| |
| if (macio_chips[0].type == macio_keylargo || |
| macio_chips[0].type == macio_pangea || |
| macio_chips[0].type == macio_intrepid) { |
| /* Enable GMAC for now for PCI probing. It will be disabled |
| * later on after PCI probe |
| */ |
| np = of_find_node_by_name(NULL, "ethernet"); |
| while(np) { |
| if (np->parent |
| && of_device_is_compatible(np->parent, "uni-north") |
| && of_device_is_compatible(np, "gmac")) |
| core99_gmac_enable(np, 0, 1); |
| np = of_find_node_by_name(np, "ethernet"); |
| } |
| |
| /* Enable FW before PCI probe. Will be disabled later on |
| * Note: We should have a batter way to check that we are |
| * dealing with uninorth internal cell and not a PCI cell |
| * on the external PCI. The code below works though. |
| */ |
| np = of_find_node_by_name(NULL, "firewire"); |
| while(np) { |
| if (np->parent |
| && of_device_is_compatible(np->parent, "uni-north") |
| && (of_device_is_compatible(np, "pci106b,18") || |
| of_device_is_compatible(np, "pci106b,30") || |
| of_device_is_compatible(np, "pci11c1,5811"))) { |
| macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; |
| core99_firewire_enable(np, 0, 1); |
| } |
| np = of_find_node_by_name(np, "firewire"); |
| } |
| |
| /* Enable ATA-100 before PCI probe. */ |
| np = of_find_node_by_name(NULL, "ata-6"); |
| while(np) { |
| if (np->parent |
| && of_device_is_compatible(np->parent, "uni-north") |
| && of_device_is_compatible(np, "kauai-ata")) { |
| core99_ata100_enable(np, 1); |
| } |
| np = of_find_node_by_name(np, "ata-6"); |
| } |
| |
| /* Switch airport off */ |
| for_each_node_by_name(np, "radio") { |
| if (np && np->parent == macio_chips[0].of_node) { |
| macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON; |
| core99_airport_enable(np, 0, 0); |
| } |
| } |
| of_node_put(np); |
| } |
| |
| /* On all machines that support sound PM, switch sound off */ |
| if (macio_chips[0].of_node) |
| pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE, |
| macio_chips[0].of_node, 0, 0); |
| |
| /* While on some desktop G3s, we turn it back on */ |
| if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow |
| && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER || |
| pmac_mb.model_id == PMAC_TYPE_SILK)) { |
| struct macio_chip *macio = &macio_chips[0]; |
| MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); |
| MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); |
| } |
| |
| #endif /* CONFIG_POWER4 */ |
| |
| /* On all machines, switch modem & serial ports off */ |
| for_each_node_by_name(np, "ch-a") |
| initial_serial_shutdown(np); |
| of_node_put(np); |
| for_each_node_by_name(np, "ch-b") |
| initial_serial_shutdown(np); |
| of_node_put(np); |
| } |
| |
| void __init |
| pmac_feature_init(void) |
| { |
| /* Detect the UniNorth memory controller */ |
| probe_uninorth(); |
| |
| /* Probe mac-io controllers */ |
| if (probe_macios()) { |
| printk(KERN_WARNING "No mac-io chip found\n"); |
| return; |
| } |
| |
| /* Probe machine type */ |
| if (probe_motherboard()) |
| printk(KERN_WARNING "Unknown PowerMac !\n"); |
| |
| /* Set some initial features (turn off some chips that will |
| * be later turned on) |
| */ |
| set_initial_features(); |
| } |
| |
| #if 0 |
| static void dump_HT_speeds(char *name, u32 cfg, u32 frq) |
| { |
| int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 }; |
| int bits[8] = { 8,16,0,32,2,4,0,0 }; |
| int freq = (frq >> 8) & 0xf; |
| |
| if (freqs[freq] == 0) |
| printk("%s: Unknown HT link frequency %x\n", name, freq); |
| else |
| printk("%s: %d MHz on main link, (%d in / %d out) bits width\n", |
| name, freqs[freq], |
| bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]); |
| } |
| |
| void __init pmac_check_ht_link(void) |
| { |
| u32 ufreq, freq, ucfg, cfg; |
| struct device_node *pcix_node; |
| u8 px_bus, px_devfn; |
| struct pci_controller *px_hose; |
| |
| (void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND); |
| ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG); |
| ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ); |
| dump_HT_speeds("U3 HyperTransport", cfg, freq); |
| |
| pcix_node = of_find_compatible_node(NULL, "pci", "pci-x"); |
| if (pcix_node == NULL) { |
| printk("No PCI-X bridge found\n"); |
| return; |
| } |
| if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) { |
| printk("PCI-X bridge found but not matched to pci\n"); |
| return; |
| } |
| px_hose = pci_find_hose_for_OF_device(pcix_node); |
| if (px_hose == NULL) { |
| printk("PCI-X bridge found but not matched to host\n"); |
| return; |
| } |
| early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); |
| early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); |
| dump_HT_speeds("PCI-X HT Uplink", cfg, freq); |
| early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg); |
| early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq); |
| dump_HT_speeds("PCI-X HT Downlink", cfg, freq); |
| } |
| #endif /* 0 */ |
| |
| /* |
| * Early video resume hook |
| */ |
| |
| static void (*pmac_early_vresume_proc)(void *data); |
| static void *pmac_early_vresume_data; |
| |
| void pmac_set_early_video_resume(void (*proc)(void *data), void *data) |
| { |
| if (!machine_is(powermac)) |
| return; |
| preempt_disable(); |
| pmac_early_vresume_proc = proc; |
| pmac_early_vresume_data = data; |
| preempt_enable(); |
| } |
| EXPORT_SYMBOL(pmac_set_early_video_resume); |
| |
| void pmac_call_early_video_resume(void) |
| { |
| if (pmac_early_vresume_proc) |
| pmac_early_vresume_proc(pmac_early_vresume_data); |
| } |
| |
| /* |
| * AGP related suspend/resume code |
| */ |
| |
| static struct pci_dev *pmac_agp_bridge; |
| static int (*pmac_agp_suspend)(struct pci_dev *bridge); |
| static int (*pmac_agp_resume)(struct pci_dev *bridge); |
| |
| void pmac_register_agp_pm(struct pci_dev *bridge, |
| int (*suspend)(struct pci_dev *bridge), |
| int (*resume)(struct pci_dev *bridge)) |
| { |
| if (suspend || resume) { |
| pmac_agp_bridge = bridge; |
| pmac_agp_suspend = suspend; |
| pmac_agp_resume = resume; |
| return; |
| } |
| if (bridge != pmac_agp_bridge) |
| return; |
| pmac_agp_suspend = pmac_agp_resume = NULL; |
| return; |
| } |
| EXPORT_SYMBOL(pmac_register_agp_pm); |
| |
| void pmac_suspend_agp_for_card(struct pci_dev *dev) |
| { |
| if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL) |
| return; |
| if (pmac_agp_bridge->bus != dev->bus) |
| return; |
| pmac_agp_suspend(pmac_agp_bridge); |
| } |
| EXPORT_SYMBOL(pmac_suspend_agp_for_card); |
| |
| void pmac_resume_agp_for_card(struct pci_dev *dev) |
| { |
| if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL) |
| return; |
| if (pmac_agp_bridge->bus != dev->bus) |
| return; |
| pmac_agp_resume(pmac_agp_bridge); |
| } |
| EXPORT_SYMBOL(pmac_resume_agp_for_card); |
| |
| int pmac_get_uninorth_variant(void) |
| { |
| return uninorth_maj; |
| } |