| // SPDX-License-Identifier: GPL-2.0-only |
| /**************************************************************************** |
| * Driver for Solarflare network controllers and boards |
| * Copyright 2009-2013 Solarflare Communications Inc. |
| */ |
| |
| /* |
| * Driver for PHY related operations via MCDI. |
| */ |
| |
| #include <linux/slab.h> |
| #include "efx.h" |
| #include "mcdi.h" |
| #include "mcdi_pcol.h" |
| #include "nic.h" |
| #include "selftest.h" |
| |
| struct efx_mcdi_phy_data { |
| u32 flags; |
| u32 type; |
| u32 supported_cap; |
| u32 channel; |
| u32 port; |
| u32 stats_mask; |
| u8 name[20]; |
| u32 media; |
| u32 mmd_mask; |
| u8 revision[20]; |
| u32 forced_cap; |
| }; |
| |
| static int |
| efx_mcdi_get_phy_cfg(struct efx_nic *efx, struct efx_mcdi_phy_data *cfg) |
| { |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_PHY_CFG_OUT_LEN); |
| size_t outlen; |
| int rc; |
| |
| BUILD_BUG_ON(MC_CMD_GET_PHY_CFG_IN_LEN != 0); |
| BUILD_BUG_ON(MC_CMD_GET_PHY_CFG_OUT_NAME_LEN != sizeof(cfg->name)); |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_GET_PHY_CFG, NULL, 0, |
| outbuf, sizeof(outbuf), &outlen); |
| if (rc) |
| goto fail; |
| |
| if (outlen < MC_CMD_GET_PHY_CFG_OUT_LEN) { |
| rc = -EIO; |
| goto fail; |
| } |
| |
| cfg->flags = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_FLAGS); |
| cfg->type = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_TYPE); |
| cfg->supported_cap = |
| MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_SUPPORTED_CAP); |
| cfg->channel = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_CHANNEL); |
| cfg->port = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_PRT); |
| cfg->stats_mask = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_STATS_MASK); |
| memcpy(cfg->name, MCDI_PTR(outbuf, GET_PHY_CFG_OUT_NAME), |
| sizeof(cfg->name)); |
| cfg->media = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_MEDIA_TYPE); |
| cfg->mmd_mask = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_MMD_MASK); |
| memcpy(cfg->revision, MCDI_PTR(outbuf, GET_PHY_CFG_OUT_REVISION), |
| sizeof(cfg->revision)); |
| |
| return 0; |
| |
| fail: |
| netif_err(efx, hw, efx->net_dev, "%s: failed rc=%d\n", __func__, rc); |
| return rc; |
| } |
| |
| static int efx_mcdi_set_link(struct efx_nic *efx, u32 capabilities, |
| u32 flags, u32 loopback_mode, |
| u32 loopback_speed) |
| { |
| MCDI_DECLARE_BUF(inbuf, MC_CMD_SET_LINK_IN_LEN); |
| int rc; |
| |
| BUILD_BUG_ON(MC_CMD_SET_LINK_OUT_LEN != 0); |
| |
| MCDI_SET_DWORD(inbuf, SET_LINK_IN_CAP, capabilities); |
| MCDI_SET_DWORD(inbuf, SET_LINK_IN_FLAGS, flags); |
| MCDI_SET_DWORD(inbuf, SET_LINK_IN_LOOPBACK_MODE, loopback_mode); |
| MCDI_SET_DWORD(inbuf, SET_LINK_IN_LOOPBACK_SPEED, loopback_speed); |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_SET_LINK, inbuf, sizeof(inbuf), |
| NULL, 0, NULL); |
| return rc; |
| } |
| |
| static int efx_mcdi_loopback_modes(struct efx_nic *efx, u64 *loopback_modes) |
| { |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LOOPBACK_MODES_OUT_LEN); |
| size_t outlen; |
| int rc; |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_GET_LOOPBACK_MODES, NULL, 0, |
| outbuf, sizeof(outbuf), &outlen); |
| if (rc) |
| goto fail; |
| |
| if (outlen < (MC_CMD_GET_LOOPBACK_MODES_OUT_SUGGESTED_OFST + |
| MC_CMD_GET_LOOPBACK_MODES_OUT_SUGGESTED_LEN)) { |
| rc = -EIO; |
| goto fail; |
| } |
| |
| *loopback_modes = MCDI_QWORD(outbuf, GET_LOOPBACK_MODES_OUT_SUGGESTED); |
| |
| return 0; |
| |
| fail: |
| netif_err(efx, hw, efx->net_dev, "%s: failed rc=%d\n", __func__, rc); |
| return rc; |
| } |
| |
| static int efx_mcdi_mdio_read(struct net_device *net_dev, |
| int prtad, int devad, u16 addr) |
| { |
| struct efx_nic *efx = netdev_priv(net_dev); |
| MCDI_DECLARE_BUF(inbuf, MC_CMD_MDIO_READ_IN_LEN); |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_MDIO_READ_OUT_LEN); |
| size_t outlen; |
| int rc; |
| |
| MCDI_SET_DWORD(inbuf, MDIO_READ_IN_BUS, efx->mdio_bus); |
| MCDI_SET_DWORD(inbuf, MDIO_READ_IN_PRTAD, prtad); |
| MCDI_SET_DWORD(inbuf, MDIO_READ_IN_DEVAD, devad); |
| MCDI_SET_DWORD(inbuf, MDIO_READ_IN_ADDR, addr); |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_MDIO_READ, inbuf, sizeof(inbuf), |
| outbuf, sizeof(outbuf), &outlen); |
| if (rc) |
| return rc; |
| |
| if (MCDI_DWORD(outbuf, MDIO_READ_OUT_STATUS) != |
| MC_CMD_MDIO_STATUS_GOOD) |
| return -EIO; |
| |
| return (u16)MCDI_DWORD(outbuf, MDIO_READ_OUT_VALUE); |
| } |
| |
| static int efx_mcdi_mdio_write(struct net_device *net_dev, |
| int prtad, int devad, u16 addr, u16 value) |
| { |
| struct efx_nic *efx = netdev_priv(net_dev); |
| MCDI_DECLARE_BUF(inbuf, MC_CMD_MDIO_WRITE_IN_LEN); |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_MDIO_WRITE_OUT_LEN); |
| size_t outlen; |
| int rc; |
| |
| MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_BUS, efx->mdio_bus); |
| MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_PRTAD, prtad); |
| MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_DEVAD, devad); |
| MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_ADDR, addr); |
| MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_VALUE, value); |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_MDIO_WRITE, inbuf, sizeof(inbuf), |
| outbuf, sizeof(outbuf), &outlen); |
| if (rc) |
| return rc; |
| |
| if (MCDI_DWORD(outbuf, MDIO_WRITE_OUT_STATUS) != |
| MC_CMD_MDIO_STATUS_GOOD) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static void mcdi_to_ethtool_linkset(u32 media, u32 cap, unsigned long *linkset) |
| { |
| #define SET_BIT(name) __set_bit(ETHTOOL_LINK_MODE_ ## name ## _BIT, \ |
| linkset) |
| |
| bitmap_zero(linkset, __ETHTOOL_LINK_MODE_MASK_NBITS); |
| switch (media) { |
| case MC_CMD_MEDIA_KX4: |
| SET_BIT(Backplane); |
| if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) |
| SET_BIT(1000baseKX_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) |
| SET_BIT(10000baseKX4_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) |
| SET_BIT(40000baseKR4_Full); |
| break; |
| |
| case MC_CMD_MEDIA_XFP: |
| case MC_CMD_MEDIA_SFP_PLUS: |
| case MC_CMD_MEDIA_QSFP_PLUS: |
| SET_BIT(FIBRE); |
| if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) |
| SET_BIT(1000baseT_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) |
| SET_BIT(10000baseT_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) |
| SET_BIT(40000baseCR4_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN)) |
| SET_BIT(100000baseCR4_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN)) |
| SET_BIT(25000baseCR_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_50000FDX_LBN)) |
| SET_BIT(50000baseCR2_Full); |
| break; |
| |
| case MC_CMD_MEDIA_BASE_T: |
| SET_BIT(TP); |
| if (cap & (1 << MC_CMD_PHY_CAP_10HDX_LBN)) |
| SET_BIT(10baseT_Half); |
| if (cap & (1 << MC_CMD_PHY_CAP_10FDX_LBN)) |
| SET_BIT(10baseT_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_100HDX_LBN)) |
| SET_BIT(100baseT_Half); |
| if (cap & (1 << MC_CMD_PHY_CAP_100FDX_LBN)) |
| SET_BIT(100baseT_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_1000HDX_LBN)) |
| SET_BIT(1000baseT_Half); |
| if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) |
| SET_BIT(1000baseT_Full); |
| if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) |
| SET_BIT(10000baseT_Full); |
| break; |
| } |
| |
| if (cap & (1 << MC_CMD_PHY_CAP_PAUSE_LBN)) |
| SET_BIT(Pause); |
| if (cap & (1 << MC_CMD_PHY_CAP_ASYM_LBN)) |
| SET_BIT(Asym_Pause); |
| if (cap & (1 << MC_CMD_PHY_CAP_AN_LBN)) |
| SET_BIT(Autoneg); |
| |
| #undef SET_BIT |
| } |
| |
| static u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset) |
| { |
| u32 result = 0; |
| |
| #define TEST_BIT(name) test_bit(ETHTOOL_LINK_MODE_ ## name ## _BIT, \ |
| linkset) |
| |
| if (TEST_BIT(10baseT_Half)) |
| result |= (1 << MC_CMD_PHY_CAP_10HDX_LBN); |
| if (TEST_BIT(10baseT_Full)) |
| result |= (1 << MC_CMD_PHY_CAP_10FDX_LBN); |
| if (TEST_BIT(100baseT_Half)) |
| result |= (1 << MC_CMD_PHY_CAP_100HDX_LBN); |
| if (TEST_BIT(100baseT_Full)) |
| result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN); |
| if (TEST_BIT(1000baseT_Half)) |
| result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN); |
| if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full)) |
| result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN); |
| if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full)) |
| result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN); |
| if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full)) |
| result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN); |
| if (TEST_BIT(100000baseCR4_Full)) |
| result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN); |
| if (TEST_BIT(25000baseCR_Full)) |
| result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN); |
| if (TEST_BIT(50000baseCR2_Full)) |
| result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN); |
| if (TEST_BIT(Pause)) |
| result |= (1 << MC_CMD_PHY_CAP_PAUSE_LBN); |
| if (TEST_BIT(Asym_Pause)) |
| result |= (1 << MC_CMD_PHY_CAP_ASYM_LBN); |
| if (TEST_BIT(Autoneg)) |
| result |= (1 << MC_CMD_PHY_CAP_AN_LBN); |
| |
| #undef TEST_BIT |
| |
| return result; |
| } |
| |
| static u32 efx_get_mcdi_phy_flags(struct efx_nic *efx) |
| { |
| struct efx_mcdi_phy_data *phy_cfg = efx->phy_data; |
| enum efx_phy_mode mode, supported; |
| u32 flags; |
| |
| /* TODO: Advertise the capabilities supported by this PHY */ |
| supported = 0; |
| if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_TXDIS_LBN)) |
| supported |= PHY_MODE_TX_DISABLED; |
| if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_LOWPOWER_LBN)) |
| supported |= PHY_MODE_LOW_POWER; |
| if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_POWEROFF_LBN)) |
| supported |= PHY_MODE_OFF; |
| |
| mode = efx->phy_mode & supported; |
| |
| flags = 0; |
| if (mode & PHY_MODE_TX_DISABLED) |
| flags |= (1 << MC_CMD_SET_LINK_IN_TXDIS_LBN); |
| if (mode & PHY_MODE_LOW_POWER) |
| flags |= (1 << MC_CMD_SET_LINK_IN_LOWPOWER_LBN); |
| if (mode & PHY_MODE_OFF) |
| flags |= (1 << MC_CMD_SET_LINK_IN_POWEROFF_LBN); |
| |
| return flags; |
| } |
| |
| static u8 mcdi_to_ethtool_media(u32 media) |
| { |
| switch (media) { |
| case MC_CMD_MEDIA_XAUI: |
| case MC_CMD_MEDIA_CX4: |
| case MC_CMD_MEDIA_KX4: |
| return PORT_OTHER; |
| |
| case MC_CMD_MEDIA_XFP: |
| case MC_CMD_MEDIA_SFP_PLUS: |
| case MC_CMD_MEDIA_QSFP_PLUS: |
| return PORT_FIBRE; |
| |
| case MC_CMD_MEDIA_BASE_T: |
| return PORT_TP; |
| |
| default: |
| return PORT_OTHER; |
| } |
| } |
| |
| static void efx_mcdi_phy_decode_link(struct efx_nic *efx, |
| struct efx_link_state *link_state, |
| u32 speed, u32 flags, u32 fcntl) |
| { |
| switch (fcntl) { |
| case MC_CMD_FCNTL_AUTO: |
| WARN_ON(1); /* This is not a link mode */ |
| link_state->fc = EFX_FC_AUTO | EFX_FC_TX | EFX_FC_RX; |
| break; |
| case MC_CMD_FCNTL_BIDIR: |
| link_state->fc = EFX_FC_TX | EFX_FC_RX; |
| break; |
| case MC_CMD_FCNTL_RESPOND: |
| link_state->fc = EFX_FC_RX; |
| break; |
| default: |
| WARN_ON(1); |
| /* Fall through */ |
| case MC_CMD_FCNTL_OFF: |
| link_state->fc = 0; |
| break; |
| } |
| |
| link_state->up = !!(flags & (1 << MC_CMD_GET_LINK_OUT_LINK_UP_LBN)); |
| link_state->fd = !!(flags & (1 << MC_CMD_GET_LINK_OUT_FULL_DUPLEX_LBN)); |
| link_state->speed = speed; |
| } |
| |
| /* The semantics of the ethtool FEC mode bitmask are not well defined, |
| * particularly the meaning of combinations of bits. Which means we get to |
| * define our own semantics, as follows: |
| * OFF overrides any other bits, and means "disable all FEC" (with the |
| * exception of 25G KR4/CR4, where it is not possible to reject it if AN |
| * partner requests it). |
| * AUTO on its own means use cable requirements and link partner autoneg with |
| * fw-default preferences for the cable type. |
| * AUTO and either RS or BASER means use the specified FEC type if cable and |
| * link partner support it, otherwise autoneg/fw-default. |
| * RS or BASER alone means use the specified FEC type if cable and link partner |
| * support it and either requests it, otherwise no FEC. |
| * Both RS and BASER (whether AUTO or not) means use FEC if cable and link |
| * partner support it, preferring RS to BASER. |
| */ |
| static u32 ethtool_fec_caps_to_mcdi(u32 ethtool_cap) |
| { |
| u32 ret = 0; |
| |
| if (ethtool_cap & ETHTOOL_FEC_OFF) |
| return 0; |
| |
| if (ethtool_cap & ETHTOOL_FEC_AUTO) |
| ret |= (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN) | |
| (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN) | |
| (1 << MC_CMD_PHY_CAP_RS_FEC_LBN); |
| if (ethtool_cap & ETHTOOL_FEC_RS) |
| ret |= (1 << MC_CMD_PHY_CAP_RS_FEC_LBN) | |
| (1 << MC_CMD_PHY_CAP_RS_FEC_REQUESTED_LBN); |
| if (ethtool_cap & ETHTOOL_FEC_BASER) |
| ret |= (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN) | |
| (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN) | |
| (1 << MC_CMD_PHY_CAP_BASER_FEC_REQUESTED_LBN) | |
| (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_REQUESTED_LBN); |
| return ret; |
| } |
| |
| /* Invert ethtool_fec_caps_to_mcdi. There are two combinations that function |
| * can never produce, (baser xor rs) and neither req; the implementation below |
| * maps both of those to AUTO. This should never matter, and it's not clear |
| * what a better mapping would be anyway. |
| */ |
| static u32 mcdi_fec_caps_to_ethtool(u32 caps, bool is_25g) |
| { |
| bool rs = caps & (1 << MC_CMD_PHY_CAP_RS_FEC_LBN), |
| rs_req = caps & (1 << MC_CMD_PHY_CAP_RS_FEC_REQUESTED_LBN), |
| baser = is_25g ? caps & (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN) |
| : caps & (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN), |
| baser_req = is_25g ? caps & (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_REQUESTED_LBN) |
| : caps & (1 << MC_CMD_PHY_CAP_BASER_FEC_REQUESTED_LBN); |
| |
| if (!baser && !rs) |
| return ETHTOOL_FEC_OFF; |
| return (rs_req ? ETHTOOL_FEC_RS : 0) | |
| (baser_req ? ETHTOOL_FEC_BASER : 0) | |
| (baser == baser_req && rs == rs_req ? 0 : ETHTOOL_FEC_AUTO); |
| } |
| |
| static int efx_mcdi_phy_probe(struct efx_nic *efx) |
| { |
| struct efx_mcdi_phy_data *phy_data; |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_LEN); |
| u32 caps; |
| int rc; |
| |
| /* Initialise and populate phy_data */ |
| phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); |
| if (phy_data == NULL) |
| return -ENOMEM; |
| |
| rc = efx_mcdi_get_phy_cfg(efx, phy_data); |
| if (rc != 0) |
| goto fail; |
| |
| /* Read initial link advertisement */ |
| BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); |
| rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, |
| outbuf, sizeof(outbuf), NULL); |
| if (rc) |
| goto fail; |
| |
| /* Fill out nic state */ |
| efx->phy_data = phy_data; |
| efx->phy_type = phy_data->type; |
| |
| efx->mdio_bus = phy_data->channel; |
| efx->mdio.prtad = phy_data->port; |
| efx->mdio.mmds = phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22); |
| efx->mdio.mode_support = 0; |
| if (phy_data->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22)) |
| efx->mdio.mode_support |= MDIO_SUPPORTS_C22; |
| if (phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22)) |
| efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; |
| |
| caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP); |
| if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN)) |
| mcdi_to_ethtool_linkset(phy_data->media, caps, |
| efx->link_advertising); |
| else |
| phy_data->forced_cap = caps; |
| |
| /* Assert that we can map efx -> mcdi loopback modes */ |
| BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE); |
| BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA); |
| BUILD_BUG_ON(LOOPBACK_GMAC != MC_CMD_LOOPBACK_GMAC); |
| BUILD_BUG_ON(LOOPBACK_XGMII != MC_CMD_LOOPBACK_XGMII); |
| BUILD_BUG_ON(LOOPBACK_XGXS != MC_CMD_LOOPBACK_XGXS); |
| BUILD_BUG_ON(LOOPBACK_XAUI != MC_CMD_LOOPBACK_XAUI); |
| BUILD_BUG_ON(LOOPBACK_GMII != MC_CMD_LOOPBACK_GMII); |
| BUILD_BUG_ON(LOOPBACK_SGMII != MC_CMD_LOOPBACK_SGMII); |
| BUILD_BUG_ON(LOOPBACK_XGBR != MC_CMD_LOOPBACK_XGBR); |
| BUILD_BUG_ON(LOOPBACK_XFI != MC_CMD_LOOPBACK_XFI); |
| BUILD_BUG_ON(LOOPBACK_XAUI_FAR != MC_CMD_LOOPBACK_XAUI_FAR); |
| BUILD_BUG_ON(LOOPBACK_GMII_FAR != MC_CMD_LOOPBACK_GMII_FAR); |
| BUILD_BUG_ON(LOOPBACK_SGMII_FAR != MC_CMD_LOOPBACK_SGMII_FAR); |
| BUILD_BUG_ON(LOOPBACK_XFI_FAR != MC_CMD_LOOPBACK_XFI_FAR); |
| BUILD_BUG_ON(LOOPBACK_GPHY != MC_CMD_LOOPBACK_GPHY); |
| BUILD_BUG_ON(LOOPBACK_PHYXS != MC_CMD_LOOPBACK_PHYXS); |
| BUILD_BUG_ON(LOOPBACK_PCS != MC_CMD_LOOPBACK_PCS); |
| BUILD_BUG_ON(LOOPBACK_PMAPMD != MC_CMD_LOOPBACK_PMAPMD); |
| BUILD_BUG_ON(LOOPBACK_XPORT != MC_CMD_LOOPBACK_XPORT); |
| BUILD_BUG_ON(LOOPBACK_XGMII_WS != MC_CMD_LOOPBACK_XGMII_WS); |
| BUILD_BUG_ON(LOOPBACK_XAUI_WS != MC_CMD_LOOPBACK_XAUI_WS); |
| BUILD_BUG_ON(LOOPBACK_XAUI_WS_FAR != MC_CMD_LOOPBACK_XAUI_WS_FAR); |
| BUILD_BUG_ON(LOOPBACK_XAUI_WS_NEAR != MC_CMD_LOOPBACK_XAUI_WS_NEAR); |
| BUILD_BUG_ON(LOOPBACK_GMII_WS != MC_CMD_LOOPBACK_GMII_WS); |
| BUILD_BUG_ON(LOOPBACK_XFI_WS != MC_CMD_LOOPBACK_XFI_WS); |
| BUILD_BUG_ON(LOOPBACK_XFI_WS_FAR != MC_CMD_LOOPBACK_XFI_WS_FAR); |
| BUILD_BUG_ON(LOOPBACK_PHYXS_WS != MC_CMD_LOOPBACK_PHYXS_WS); |
| |
| rc = efx_mcdi_loopback_modes(efx, &efx->loopback_modes); |
| if (rc != 0) |
| goto fail; |
| /* The MC indicates that LOOPBACK_NONE is a valid loopback mode, |
| * but by convention we don't */ |
| efx->loopback_modes &= ~(1 << LOOPBACK_NONE); |
| |
| /* Set the initial link mode */ |
| efx_mcdi_phy_decode_link( |
| efx, &efx->link_state, |
| MCDI_DWORD(outbuf, GET_LINK_OUT_LINK_SPEED), |
| MCDI_DWORD(outbuf, GET_LINK_OUT_FLAGS), |
| MCDI_DWORD(outbuf, GET_LINK_OUT_FCNTL)); |
| |
| /* Record the initial FEC configuration (or nearest approximation |
| * representable in the ethtool configuration space) |
| */ |
| efx->fec_config = mcdi_fec_caps_to_ethtool(caps, |
| efx->link_state.speed == 25000 || |
| efx->link_state.speed == 50000); |
| |
| /* Default to Autonegotiated flow control if the PHY supports it */ |
| efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; |
| if (phy_data->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN)) |
| efx->wanted_fc |= EFX_FC_AUTO; |
| efx_link_set_wanted_fc(efx, efx->wanted_fc); |
| |
| return 0; |
| |
| fail: |
| kfree(phy_data); |
| return rc; |
| } |
| |
| int efx_mcdi_port_reconfigure(struct efx_nic *efx) |
| { |
| struct efx_mcdi_phy_data *phy_cfg = efx->phy_data; |
| u32 caps = (efx->link_advertising[0] ? |
| ethtool_linkset_to_mcdi_cap(efx->link_advertising) : |
| phy_cfg->forced_cap); |
| |
| caps |= ethtool_fec_caps_to_mcdi(efx->fec_config); |
| |
| return efx_mcdi_set_link(efx, caps, efx_get_mcdi_phy_flags(efx), |
| efx->loopback_mode, 0); |
| } |
| |
| /* Verify that the forced flow control settings (!EFX_FC_AUTO) are |
| * supported by the link partner. Warn the user if this isn't the case |
| */ |
| static void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa) |
| { |
| struct efx_mcdi_phy_data *phy_cfg = efx->phy_data; |
| u32 rmtadv; |
| |
| /* The link partner capabilities are only relevant if the |
| * link supports flow control autonegotiation */ |
| if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN)) |
| return; |
| |
| /* If flow control autoneg is supported and enabled, then fine */ |
| if (efx->wanted_fc & EFX_FC_AUTO) |
| return; |
| |
| rmtadv = 0; |
| if (lpa & (1 << MC_CMD_PHY_CAP_PAUSE_LBN)) |
| rmtadv |= ADVERTISED_Pause; |
| if (lpa & (1 << MC_CMD_PHY_CAP_ASYM_LBN)) |
| rmtadv |= ADVERTISED_Asym_Pause; |
| |
| if ((efx->wanted_fc & EFX_FC_TX) && rmtadv == ADVERTISED_Asym_Pause) |
| netif_err(efx, link, efx->net_dev, |
| "warning: link partner doesn't support pause frames"); |
| } |
| |
| static bool efx_mcdi_phy_poll(struct efx_nic *efx) |
| { |
| struct efx_link_state old_state = efx->link_state; |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_LEN); |
| int rc; |
| |
| WARN_ON(!mutex_is_locked(&efx->mac_lock)); |
| |
| BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, |
| outbuf, sizeof(outbuf), NULL); |
| if (rc) |
| efx->link_state.up = false; |
| else |
| efx_mcdi_phy_decode_link( |
| efx, &efx->link_state, |
| MCDI_DWORD(outbuf, GET_LINK_OUT_LINK_SPEED), |
| MCDI_DWORD(outbuf, GET_LINK_OUT_FLAGS), |
| MCDI_DWORD(outbuf, GET_LINK_OUT_FCNTL)); |
| |
| return !efx_link_state_equal(&efx->link_state, &old_state); |
| } |
| |
| static void efx_mcdi_phy_remove(struct efx_nic *efx) |
| { |
| struct efx_mcdi_phy_data *phy_data = efx->phy_data; |
| |
| efx->phy_data = NULL; |
| kfree(phy_data); |
| } |
| |
| static void efx_mcdi_phy_get_link_ksettings(struct efx_nic *efx, |
| struct ethtool_link_ksettings *cmd) |
| { |
| struct efx_mcdi_phy_data *phy_cfg = efx->phy_data; |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_LEN); |
| int rc; |
| |
| cmd->base.speed = efx->link_state.speed; |
| cmd->base.duplex = efx->link_state.fd; |
| cmd->base.port = mcdi_to_ethtool_media(phy_cfg->media); |
| cmd->base.phy_address = phy_cfg->port; |
| cmd->base.autoneg = !!(efx->link_advertising[0] & ADVERTISED_Autoneg); |
| cmd->base.mdio_support = (efx->mdio.mode_support & |
| (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22)); |
| |
| mcdi_to_ethtool_linkset(phy_cfg->media, phy_cfg->supported_cap, |
| cmd->link_modes.supported); |
| memcpy(cmd->link_modes.advertising, efx->link_advertising, |
| sizeof(__ETHTOOL_DECLARE_LINK_MODE_MASK())); |
| |
| BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); |
| rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, |
| outbuf, sizeof(outbuf), NULL); |
| if (rc) |
| return; |
| mcdi_to_ethtool_linkset(phy_cfg->media, |
| MCDI_DWORD(outbuf, GET_LINK_OUT_LP_CAP), |
| cmd->link_modes.lp_advertising); |
| } |
| |
| static int |
| efx_mcdi_phy_set_link_ksettings(struct efx_nic *efx, |
| const struct ethtool_link_ksettings *cmd) |
| { |
| struct efx_mcdi_phy_data *phy_cfg = efx->phy_data; |
| u32 caps; |
| int rc; |
| |
| if (cmd->base.autoneg) { |
| caps = (ethtool_linkset_to_mcdi_cap(cmd->link_modes.advertising) | |
| 1 << MC_CMD_PHY_CAP_AN_LBN); |
| } else if (cmd->base.duplex) { |
| switch (cmd->base.speed) { |
| case 10: caps = 1 << MC_CMD_PHY_CAP_10FDX_LBN; break; |
| case 100: caps = 1 << MC_CMD_PHY_CAP_100FDX_LBN; break; |
| case 1000: caps = 1 << MC_CMD_PHY_CAP_1000FDX_LBN; break; |
| case 10000: caps = 1 << MC_CMD_PHY_CAP_10000FDX_LBN; break; |
| case 40000: caps = 1 << MC_CMD_PHY_CAP_40000FDX_LBN; break; |
| case 100000: caps = 1 << MC_CMD_PHY_CAP_100000FDX_LBN; break; |
| case 25000: caps = 1 << MC_CMD_PHY_CAP_25000FDX_LBN; break; |
| case 50000: caps = 1 << MC_CMD_PHY_CAP_50000FDX_LBN; break; |
| default: return -EINVAL; |
| } |
| } else { |
| switch (cmd->base.speed) { |
| case 10: caps = 1 << MC_CMD_PHY_CAP_10HDX_LBN; break; |
| case 100: caps = 1 << MC_CMD_PHY_CAP_100HDX_LBN; break; |
| case 1000: caps = 1 << MC_CMD_PHY_CAP_1000HDX_LBN; break; |
| default: return -EINVAL; |
| } |
| } |
| |
| caps |= ethtool_fec_caps_to_mcdi(efx->fec_config); |
| |
| rc = efx_mcdi_set_link(efx, caps, efx_get_mcdi_phy_flags(efx), |
| efx->loopback_mode, 0); |
| if (rc) |
| return rc; |
| |
| if (cmd->base.autoneg) { |
| efx_link_set_advertising(efx, cmd->link_modes.advertising); |
| phy_cfg->forced_cap = 0; |
| } else { |
| efx_link_clear_advertising(efx); |
| phy_cfg->forced_cap = caps; |
| } |
| return 0; |
| } |
| |
| static int efx_mcdi_phy_get_fecparam(struct efx_nic *efx, |
| struct ethtool_fecparam *fec) |
| { |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_V2_LEN); |
| u32 caps, active, speed; /* MCDI format */ |
| bool is_25g = false; |
| size_t outlen; |
| int rc; |
| |
| BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); |
| rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, |
| outbuf, sizeof(outbuf), &outlen); |
| if (rc) |
| return rc; |
| if (outlen < MC_CMD_GET_LINK_OUT_V2_LEN) |
| return -EOPNOTSUPP; |
| |
| /* behaviour for 25G/50G links depends on 25G BASER bit */ |
| speed = MCDI_DWORD(outbuf, GET_LINK_OUT_V2_LINK_SPEED); |
| is_25g = speed == 25000 || speed == 50000; |
| |
| caps = MCDI_DWORD(outbuf, GET_LINK_OUT_V2_CAP); |
| fec->fec = mcdi_fec_caps_to_ethtool(caps, is_25g); |
| /* BASER is never supported on 100G */ |
| if (speed == 100000) |
| fec->fec &= ~ETHTOOL_FEC_BASER; |
| |
| active = MCDI_DWORD(outbuf, GET_LINK_OUT_V2_FEC_TYPE); |
| switch (active) { |
| case MC_CMD_FEC_NONE: |
| fec->active_fec = ETHTOOL_FEC_OFF; |
| break; |
| case MC_CMD_FEC_BASER: |
| fec->active_fec = ETHTOOL_FEC_BASER; |
| break; |
| case MC_CMD_FEC_RS: |
| fec->active_fec = ETHTOOL_FEC_RS; |
| break; |
| default: |
| netif_warn(efx, hw, efx->net_dev, |
| "Firmware reports unrecognised FEC_TYPE %u\n", |
| active); |
| /* We don't know what firmware has picked. AUTO is as good a |
| * "can't happen" value as any other. |
| */ |
| fec->active_fec = ETHTOOL_FEC_AUTO; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int efx_mcdi_phy_set_fecparam(struct efx_nic *efx, |
| const struct ethtool_fecparam *fec) |
| { |
| struct efx_mcdi_phy_data *phy_cfg = efx->phy_data; |
| u32 caps; |
| int rc; |
| |
| /* Work out what efx_mcdi_phy_set_link_ksettings() would produce from |
| * saved advertising bits |
| */ |
| if (test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, efx->link_advertising)) |
| caps = (ethtool_linkset_to_mcdi_cap(efx->link_advertising) | |
| 1 << MC_CMD_PHY_CAP_AN_LBN); |
| else |
| caps = phy_cfg->forced_cap; |
| |
| caps |= ethtool_fec_caps_to_mcdi(fec->fec); |
| rc = efx_mcdi_set_link(efx, caps, efx_get_mcdi_phy_flags(efx), |
| efx->loopback_mode, 0); |
| if (rc) |
| return rc; |
| |
| /* Record the new FEC setting for subsequent set_link calls */ |
| efx->fec_config = fec->fec; |
| return 0; |
| } |
| |
| static int efx_mcdi_phy_test_alive(struct efx_nic *efx) |
| { |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_PHY_STATE_OUT_LEN); |
| size_t outlen; |
| int rc; |
| |
| BUILD_BUG_ON(MC_CMD_GET_PHY_STATE_IN_LEN != 0); |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_GET_PHY_STATE, NULL, 0, |
| outbuf, sizeof(outbuf), &outlen); |
| if (rc) |
| return rc; |
| |
| if (outlen < MC_CMD_GET_PHY_STATE_OUT_LEN) |
| return -EIO; |
| if (MCDI_DWORD(outbuf, GET_PHY_STATE_OUT_STATE) != MC_CMD_PHY_STATE_OK) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static const char *const mcdi_sft9001_cable_diag_names[] = { |
| "cable.pairA.length", |
| "cable.pairB.length", |
| "cable.pairC.length", |
| "cable.pairD.length", |
| "cable.pairA.status", |
| "cable.pairB.status", |
| "cable.pairC.status", |
| "cable.pairD.status", |
| }; |
| |
| static int efx_mcdi_bist(struct efx_nic *efx, unsigned int bist_mode, |
| int *results) |
| { |
| unsigned int retry, i, count = 0; |
| size_t outlen; |
| u32 status; |
| MCDI_DECLARE_BUF(inbuf, MC_CMD_START_BIST_IN_LEN); |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_POLL_BIST_OUT_SFT9001_LEN); |
| u8 *ptr; |
| int rc; |
| |
| BUILD_BUG_ON(MC_CMD_START_BIST_OUT_LEN != 0); |
| MCDI_SET_DWORD(inbuf, START_BIST_IN_TYPE, bist_mode); |
| rc = efx_mcdi_rpc(efx, MC_CMD_START_BIST, |
| inbuf, MC_CMD_START_BIST_IN_LEN, NULL, 0, NULL); |
| if (rc) |
| goto out; |
| |
| /* Wait up to 10s for BIST to finish */ |
| for (retry = 0; retry < 100; ++retry) { |
| BUILD_BUG_ON(MC_CMD_POLL_BIST_IN_LEN != 0); |
| rc = efx_mcdi_rpc(efx, MC_CMD_POLL_BIST, NULL, 0, |
| outbuf, sizeof(outbuf), &outlen); |
| if (rc) |
| goto out; |
| |
| status = MCDI_DWORD(outbuf, POLL_BIST_OUT_RESULT); |
| if (status != MC_CMD_POLL_BIST_RUNNING) |
| goto finished; |
| |
| msleep(100); |
| } |
| |
| rc = -ETIMEDOUT; |
| goto out; |
| |
| finished: |
| results[count++] = (status == MC_CMD_POLL_BIST_PASSED) ? 1 : -1; |
| |
| /* SFT9001 specific cable diagnostics output */ |
| if (efx->phy_type == PHY_TYPE_SFT9001B && |
| (bist_mode == MC_CMD_PHY_BIST_CABLE_SHORT || |
| bist_mode == MC_CMD_PHY_BIST_CABLE_LONG)) { |
| ptr = MCDI_PTR(outbuf, POLL_BIST_OUT_SFT9001_CABLE_LENGTH_A); |
| if (status == MC_CMD_POLL_BIST_PASSED && |
| outlen >= MC_CMD_POLL_BIST_OUT_SFT9001_LEN) { |
| for (i = 0; i < 8; i++) { |
| results[count + i] = |
| EFX_DWORD_FIELD(((efx_dword_t *)ptr)[i], |
| EFX_DWORD_0); |
| } |
| } |
| count += 8; |
| } |
| rc = count; |
| |
| out: |
| return rc; |
| } |
| |
| static int efx_mcdi_phy_run_tests(struct efx_nic *efx, int *results, |
| unsigned flags) |
| { |
| struct efx_mcdi_phy_data *phy_cfg = efx->phy_data; |
| u32 mode; |
| int rc; |
| |
| if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_LBN)) { |
| rc = efx_mcdi_bist(efx, MC_CMD_PHY_BIST, results); |
| if (rc < 0) |
| return rc; |
| |
| results += rc; |
| } |
| |
| /* If we support both LONG and SHORT, then run each in response to |
| * break or not. Otherwise, run the one we support */ |
| mode = 0; |
| if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_SHORT_LBN)) { |
| if ((flags & ETH_TEST_FL_OFFLINE) && |
| (phy_cfg->flags & |
| (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_LONG_LBN))) |
| mode = MC_CMD_PHY_BIST_CABLE_LONG; |
| else |
| mode = MC_CMD_PHY_BIST_CABLE_SHORT; |
| } else if (phy_cfg->flags & |
| (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_LONG_LBN)) |
| mode = MC_CMD_PHY_BIST_CABLE_LONG; |
| |
| if (mode != 0) { |
| rc = efx_mcdi_bist(efx, mode, results); |
| if (rc < 0) |
| return rc; |
| results += rc; |
| } |
| |
| return 0; |
| } |
| |
| static const char *efx_mcdi_phy_test_name(struct efx_nic *efx, |
| unsigned int index) |
| { |
| struct efx_mcdi_phy_data *phy_cfg = efx->phy_data; |
| |
| if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_LBN)) { |
| if (index == 0) |
| return "bist"; |
| --index; |
| } |
| |
| if (phy_cfg->flags & ((1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_SHORT_LBN) | |
| (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_LONG_LBN))) { |
| if (index == 0) |
| return "cable"; |
| --index; |
| |
| if (efx->phy_type == PHY_TYPE_SFT9001B) { |
| if (index < ARRAY_SIZE(mcdi_sft9001_cable_diag_names)) |
| return mcdi_sft9001_cable_diag_names[index]; |
| index -= ARRAY_SIZE(mcdi_sft9001_cable_diag_names); |
| } |
| } |
| |
| return NULL; |
| } |
| |
| #define SFP_PAGE_SIZE 128 |
| #define SFF_DIAG_TYPE_OFFSET 92 |
| #define SFF_DIAG_ADDR_CHANGE BIT(2) |
| #define SFF_8079_NUM_PAGES 2 |
| #define SFF_8472_NUM_PAGES 4 |
| #define SFF_8436_NUM_PAGES 5 |
| #define SFF_DMT_LEVEL_OFFSET 94 |
| |
| /** efx_mcdi_phy_get_module_eeprom_page() - Get a single page of module eeprom |
| * @efx: NIC context |
| * @page: EEPROM page number |
| * @data: Destination data pointer |
| * @offset: Offset in page to copy from in to data |
| * @space: Space available in data |
| * |
| * Return: |
| * >=0 - amount of data copied |
| * <0 - error |
| */ |
| static int efx_mcdi_phy_get_module_eeprom_page(struct efx_nic *efx, |
| unsigned int page, |
| u8 *data, ssize_t offset, |
| ssize_t space) |
| { |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_PHY_MEDIA_INFO_OUT_LENMAX); |
| MCDI_DECLARE_BUF(inbuf, MC_CMD_GET_PHY_MEDIA_INFO_IN_LEN); |
| size_t outlen; |
| unsigned int payload_len; |
| unsigned int to_copy; |
| int rc; |
| |
| if (offset > SFP_PAGE_SIZE) |
| return -EINVAL; |
| |
| to_copy = min(space, SFP_PAGE_SIZE - offset); |
| |
| MCDI_SET_DWORD(inbuf, GET_PHY_MEDIA_INFO_IN_PAGE, page); |
| rc = efx_mcdi_rpc_quiet(efx, MC_CMD_GET_PHY_MEDIA_INFO, |
| inbuf, sizeof(inbuf), |
| outbuf, sizeof(outbuf), |
| &outlen); |
| |
| if (rc) |
| return rc; |
| |
| if (outlen < (MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_OFST + |
| SFP_PAGE_SIZE)) |
| return -EIO; |
| |
| payload_len = MCDI_DWORD(outbuf, GET_PHY_MEDIA_INFO_OUT_DATALEN); |
| if (payload_len != SFP_PAGE_SIZE) |
| return -EIO; |
| |
| memcpy(data, MCDI_PTR(outbuf, GET_PHY_MEDIA_INFO_OUT_DATA) + offset, |
| to_copy); |
| |
| return to_copy; |
| } |
| |
| static int efx_mcdi_phy_get_module_eeprom_byte(struct efx_nic *efx, |
| unsigned int page, |
| u8 byte) |
| { |
| int rc; |
| u8 data; |
| |
| rc = efx_mcdi_phy_get_module_eeprom_page(efx, page, &data, byte, 1); |
| if (rc == 1) |
| return data; |
| |
| return rc; |
| } |
| |
| static int efx_mcdi_phy_diag_type(struct efx_nic *efx) |
| { |
| /* Page zero of the EEPROM includes the diagnostic type at byte 92. */ |
| return efx_mcdi_phy_get_module_eeprom_byte(efx, 0, |
| SFF_DIAG_TYPE_OFFSET); |
| } |
| |
| static int efx_mcdi_phy_sff_8472_level(struct efx_nic *efx) |
| { |
| /* Page zero of the EEPROM includes the DMT level at byte 94. */ |
| return efx_mcdi_phy_get_module_eeprom_byte(efx, 0, |
| SFF_DMT_LEVEL_OFFSET); |
| } |
| |
| static u32 efx_mcdi_phy_module_type(struct efx_nic *efx) |
| { |
| struct efx_mcdi_phy_data *phy_data = efx->phy_data; |
| |
| if (phy_data->media != MC_CMD_MEDIA_QSFP_PLUS) |
| return phy_data->media; |
| |
| /* A QSFP+ NIC may actually have an SFP+ module attached. |
| * The ID is page 0, byte 0. |
| */ |
| switch (efx_mcdi_phy_get_module_eeprom_byte(efx, 0, 0)) { |
| case 0x3: |
| return MC_CMD_MEDIA_SFP_PLUS; |
| case 0xc: |
| case 0xd: |
| return MC_CMD_MEDIA_QSFP_PLUS; |
| default: |
| return 0; |
| } |
| } |
| |
| static int efx_mcdi_phy_get_module_eeprom(struct efx_nic *efx, |
| struct ethtool_eeprom *ee, u8 *data) |
| { |
| int rc; |
| ssize_t space_remaining = ee->len; |
| unsigned int page_off; |
| bool ignore_missing; |
| int num_pages; |
| int page; |
| |
| switch (efx_mcdi_phy_module_type(efx)) { |
| case MC_CMD_MEDIA_SFP_PLUS: |
| num_pages = efx_mcdi_phy_sff_8472_level(efx) > 0 ? |
| SFF_8472_NUM_PAGES : SFF_8079_NUM_PAGES; |
| page = 0; |
| ignore_missing = false; |
| break; |
| case MC_CMD_MEDIA_QSFP_PLUS: |
| num_pages = SFF_8436_NUM_PAGES; |
| page = -1; /* We obtain the lower page by asking for -1. */ |
| ignore_missing = true; /* Ignore missing pages after page 0. */ |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| page_off = ee->offset % SFP_PAGE_SIZE; |
| page += ee->offset / SFP_PAGE_SIZE; |
| |
| while (space_remaining && (page < num_pages)) { |
| rc = efx_mcdi_phy_get_module_eeprom_page(efx, page, |
| data, page_off, |
| space_remaining); |
| |
| if (rc > 0) { |
| space_remaining -= rc; |
| data += rc; |
| page_off = 0; |
| page++; |
| } else if (rc == 0) { |
| space_remaining = 0; |
| } else if (ignore_missing && (page > 0)) { |
| int intended_size = SFP_PAGE_SIZE - page_off; |
| |
| space_remaining -= intended_size; |
| if (space_remaining < 0) { |
| space_remaining = 0; |
| } else { |
| memset(data, 0, intended_size); |
| data += intended_size; |
| page_off = 0; |
| page++; |
| rc = 0; |
| } |
| } else { |
| return rc; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int efx_mcdi_phy_get_module_info(struct efx_nic *efx, |
| struct ethtool_modinfo *modinfo) |
| { |
| int sff_8472_level; |
| int diag_type; |
| |
| switch (efx_mcdi_phy_module_type(efx)) { |
| case MC_CMD_MEDIA_SFP_PLUS: |
| sff_8472_level = efx_mcdi_phy_sff_8472_level(efx); |
| |
| /* If we can't read the diagnostics level we have none. */ |
| if (sff_8472_level < 0) |
| return -EOPNOTSUPP; |
| |
| /* Check if this module requires the (unsupported) address |
| * change operation. |
| */ |
| diag_type = efx_mcdi_phy_diag_type(efx); |
| |
| if ((sff_8472_level == 0) || |
| (diag_type & SFF_DIAG_ADDR_CHANGE)) { |
| modinfo->type = ETH_MODULE_SFF_8079; |
| modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; |
| } else { |
| modinfo->type = ETH_MODULE_SFF_8472; |
| modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; |
| } |
| break; |
| |
| case MC_CMD_MEDIA_QSFP_PLUS: |
| modinfo->type = ETH_MODULE_SFF_8436; |
| modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN; |
| break; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static const struct efx_phy_operations efx_mcdi_phy_ops = { |
| .probe = efx_mcdi_phy_probe, |
| .init = efx_port_dummy_op_int, |
| .reconfigure = efx_mcdi_port_reconfigure, |
| .poll = efx_mcdi_phy_poll, |
| .fini = efx_port_dummy_op_void, |
| .remove = efx_mcdi_phy_remove, |
| .get_link_ksettings = efx_mcdi_phy_get_link_ksettings, |
| .set_link_ksettings = efx_mcdi_phy_set_link_ksettings, |
| .get_fecparam = efx_mcdi_phy_get_fecparam, |
| .set_fecparam = efx_mcdi_phy_set_fecparam, |
| .test_alive = efx_mcdi_phy_test_alive, |
| .run_tests = efx_mcdi_phy_run_tests, |
| .test_name = efx_mcdi_phy_test_name, |
| .get_module_eeprom = efx_mcdi_phy_get_module_eeprom, |
| .get_module_info = efx_mcdi_phy_get_module_info, |
| }; |
| |
| u32 efx_mcdi_phy_get_caps(struct efx_nic *efx) |
| { |
| struct efx_mcdi_phy_data *phy_data = efx->phy_data; |
| |
| return phy_data->supported_cap; |
| } |
| |
| static unsigned int efx_mcdi_event_link_speed[] = { |
| [MCDI_EVENT_LINKCHANGE_SPEED_100M] = 100, |
| [MCDI_EVENT_LINKCHANGE_SPEED_1G] = 1000, |
| [MCDI_EVENT_LINKCHANGE_SPEED_10G] = 10000, |
| [MCDI_EVENT_LINKCHANGE_SPEED_40G] = 40000, |
| [MCDI_EVENT_LINKCHANGE_SPEED_25G] = 25000, |
| [MCDI_EVENT_LINKCHANGE_SPEED_50G] = 50000, |
| [MCDI_EVENT_LINKCHANGE_SPEED_100G] = 100000, |
| }; |
| |
| void efx_mcdi_process_link_change(struct efx_nic *efx, efx_qword_t *ev) |
| { |
| u32 flags, fcntl, speed, lpa; |
| |
| speed = EFX_QWORD_FIELD(*ev, MCDI_EVENT_LINKCHANGE_SPEED); |
| EFX_WARN_ON_PARANOID(speed >= ARRAY_SIZE(efx_mcdi_event_link_speed)); |
| speed = efx_mcdi_event_link_speed[speed]; |
| |
| flags = EFX_QWORD_FIELD(*ev, MCDI_EVENT_LINKCHANGE_LINK_FLAGS); |
| fcntl = EFX_QWORD_FIELD(*ev, MCDI_EVENT_LINKCHANGE_FCNTL); |
| lpa = EFX_QWORD_FIELD(*ev, MCDI_EVENT_LINKCHANGE_LP_CAP); |
| |
| /* efx->link_state is only modified by efx_mcdi_phy_get_link(), |
| * which is only run after flushing the event queues. Therefore, it |
| * is safe to modify the link state outside of the mac_lock here. |
| */ |
| efx_mcdi_phy_decode_link(efx, &efx->link_state, speed, flags, fcntl); |
| |
| efx_mcdi_phy_check_fcntl(efx, lpa); |
| |
| efx_link_status_changed(efx); |
| } |
| |
| int efx_mcdi_set_mac(struct efx_nic *efx) |
| { |
| u32 fcntl; |
| MCDI_DECLARE_BUF(cmdbytes, MC_CMD_SET_MAC_IN_LEN); |
| |
| BUILD_BUG_ON(MC_CMD_SET_MAC_OUT_LEN != 0); |
| |
| /* This has no effect on EF10 */ |
| ether_addr_copy(MCDI_PTR(cmdbytes, SET_MAC_IN_ADDR), |
| efx->net_dev->dev_addr); |
| |
| MCDI_SET_DWORD(cmdbytes, SET_MAC_IN_MTU, |
| EFX_MAX_FRAME_LEN(efx->net_dev->mtu)); |
| MCDI_SET_DWORD(cmdbytes, SET_MAC_IN_DRAIN, 0); |
| |
| /* Set simple MAC filter for Siena */ |
| MCDI_POPULATE_DWORD_1(cmdbytes, SET_MAC_IN_REJECT, |
| SET_MAC_IN_REJECT_UNCST, efx->unicast_filter); |
| |
| MCDI_POPULATE_DWORD_1(cmdbytes, SET_MAC_IN_FLAGS, |
| SET_MAC_IN_FLAG_INCLUDE_FCS, |
| !!(efx->net_dev->features & NETIF_F_RXFCS)); |
| |
| switch (efx->wanted_fc) { |
| case EFX_FC_RX | EFX_FC_TX: |
| fcntl = MC_CMD_FCNTL_BIDIR; |
| break; |
| case EFX_FC_RX: |
| fcntl = MC_CMD_FCNTL_RESPOND; |
| break; |
| default: |
| fcntl = MC_CMD_FCNTL_OFF; |
| break; |
| } |
| if (efx->wanted_fc & EFX_FC_AUTO) |
| fcntl = MC_CMD_FCNTL_AUTO; |
| if (efx->fc_disable) |
| fcntl = MC_CMD_FCNTL_OFF; |
| |
| MCDI_SET_DWORD(cmdbytes, SET_MAC_IN_FCNTL, fcntl); |
| |
| return efx_mcdi_rpc(efx, MC_CMD_SET_MAC, cmdbytes, sizeof(cmdbytes), |
| NULL, 0, NULL); |
| } |
| |
| bool efx_mcdi_mac_check_fault(struct efx_nic *efx) |
| { |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_LEN); |
| size_t outlength; |
| int rc; |
| |
| BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, |
| outbuf, sizeof(outbuf), &outlength); |
| if (rc) |
| return true; |
| |
| return MCDI_DWORD(outbuf, GET_LINK_OUT_MAC_FAULT) != 0; |
| } |
| |
| enum efx_stats_action { |
| EFX_STATS_ENABLE, |
| EFX_STATS_DISABLE, |
| EFX_STATS_PULL, |
| }; |
| |
| static int efx_mcdi_mac_stats(struct efx_nic *efx, |
| enum efx_stats_action action, int clear) |
| { |
| MCDI_DECLARE_BUF(inbuf, MC_CMD_MAC_STATS_IN_LEN); |
| int rc; |
| int change = action == EFX_STATS_PULL ? 0 : 1; |
| int enable = action == EFX_STATS_ENABLE ? 1 : 0; |
| int period = action == EFX_STATS_ENABLE ? 1000 : 0; |
| dma_addr_t dma_addr = efx->stats_buffer.dma_addr; |
| u32 dma_len = action != EFX_STATS_DISABLE ? |
| efx->num_mac_stats * sizeof(u64) : 0; |
| |
| BUILD_BUG_ON(MC_CMD_MAC_STATS_OUT_DMA_LEN != 0); |
| |
| MCDI_SET_QWORD(inbuf, MAC_STATS_IN_DMA_ADDR, dma_addr); |
| MCDI_POPULATE_DWORD_7(inbuf, MAC_STATS_IN_CMD, |
| MAC_STATS_IN_DMA, !!enable, |
| MAC_STATS_IN_CLEAR, clear, |
| MAC_STATS_IN_PERIODIC_CHANGE, change, |
| MAC_STATS_IN_PERIODIC_ENABLE, enable, |
| MAC_STATS_IN_PERIODIC_CLEAR, 0, |
| MAC_STATS_IN_PERIODIC_NOEVENT, 1, |
| MAC_STATS_IN_PERIOD_MS, period); |
| MCDI_SET_DWORD(inbuf, MAC_STATS_IN_DMA_LEN, dma_len); |
| |
| if (efx_nic_rev(efx) >= EFX_REV_HUNT_A0) { |
| struct efx_ef10_nic_data *nic_data = efx->nic_data; |
| |
| MCDI_SET_DWORD(inbuf, MAC_STATS_IN_PORT_ID, nic_data->vport_id); |
| } |
| |
| rc = efx_mcdi_rpc_quiet(efx, MC_CMD_MAC_STATS, inbuf, sizeof(inbuf), |
| NULL, 0, NULL); |
| /* Expect ENOENT if DMA queues have not been set up */ |
| if (rc && (rc != -ENOENT || atomic_read(&efx->active_queues))) |
| efx_mcdi_display_error(efx, MC_CMD_MAC_STATS, sizeof(inbuf), |
| NULL, 0, rc); |
| return rc; |
| } |
| |
| void efx_mcdi_mac_start_stats(struct efx_nic *efx) |
| { |
| __le64 *dma_stats = efx->stats_buffer.addr; |
| |
| dma_stats[efx->num_mac_stats - 1] = EFX_MC_STATS_GENERATION_INVALID; |
| |
| efx_mcdi_mac_stats(efx, EFX_STATS_ENABLE, 0); |
| } |
| |
| void efx_mcdi_mac_stop_stats(struct efx_nic *efx) |
| { |
| efx_mcdi_mac_stats(efx, EFX_STATS_DISABLE, 0); |
| } |
| |
| #define EFX_MAC_STATS_WAIT_US 100 |
| #define EFX_MAC_STATS_WAIT_ATTEMPTS 10 |
| |
| void efx_mcdi_mac_pull_stats(struct efx_nic *efx) |
| { |
| __le64 *dma_stats = efx->stats_buffer.addr; |
| int attempts = EFX_MAC_STATS_WAIT_ATTEMPTS; |
| |
| dma_stats[efx->num_mac_stats - 1] = EFX_MC_STATS_GENERATION_INVALID; |
| efx_mcdi_mac_stats(efx, EFX_STATS_PULL, 0); |
| |
| while (dma_stats[efx->num_mac_stats - 1] == |
| EFX_MC_STATS_GENERATION_INVALID && |
| attempts-- != 0) |
| udelay(EFX_MAC_STATS_WAIT_US); |
| } |
| |
| int efx_mcdi_port_probe(struct efx_nic *efx) |
| { |
| int rc; |
| |
| /* Hook in PHY operations table */ |
| efx->phy_op = &efx_mcdi_phy_ops; |
| |
| /* Set up MDIO structure for PHY */ |
| efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; |
| efx->mdio.mdio_read = efx_mcdi_mdio_read; |
| efx->mdio.mdio_write = efx_mcdi_mdio_write; |
| |
| /* Fill out MDIO structure, loopback modes, and initial link state */ |
| rc = efx->phy_op->probe(efx); |
| if (rc != 0) |
| return rc; |
| |
| /* Allocate buffer for stats */ |
| rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer, |
| efx->num_mac_stats * sizeof(u64), GFP_KERNEL); |
| if (rc) |
| return rc; |
| netif_dbg(efx, probe, efx->net_dev, |
| "stats buffer at %llx (virt %p phys %llx)\n", |
| (u64)efx->stats_buffer.dma_addr, |
| efx->stats_buffer.addr, |
| (u64)virt_to_phys(efx->stats_buffer.addr)); |
| |
| efx_mcdi_mac_stats(efx, EFX_STATS_DISABLE, 1); |
| |
| return 0; |
| } |
| |
| void efx_mcdi_port_remove(struct efx_nic *efx) |
| { |
| efx->phy_op->remove(efx); |
| efx_nic_free_buffer(efx, &efx->stats_buffer); |
| } |
| |
| /* Get physical port number (EF10 only; on Siena it is same as PF number) */ |
| int efx_mcdi_port_get_number(struct efx_nic *efx) |
| { |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_PORT_ASSIGNMENT_OUT_LEN); |
| int rc; |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_GET_PORT_ASSIGNMENT, NULL, 0, |
| outbuf, sizeof(outbuf), NULL); |
| if (rc) |
| return rc; |
| |
| return MCDI_DWORD(outbuf, GET_PORT_ASSIGNMENT_OUT_PORT); |
| } |