| .. SPDX-License-Identifier: GPL-2.0-or-later |
| |
| Kernel driver corsair-psu |
| ========================= |
| |
| Supported devices: |
| |
| * Corsair Power Supplies |
| |
| Corsair HX550i |
| |
| Corsair HX650i |
| |
| Corsair HX750i |
| |
| Corsair HX850i |
| |
| Corsair HX1000i |
| |
| Corsair HX1200i |
| |
| Corsair RM550i |
| |
| Corsair RM650i |
| |
| Corsair RM750i |
| |
| Corsair RM850i |
| |
| Corsair RM1000i |
| |
| Author: Wilken Gottwalt |
| |
| Description |
| ----------- |
| |
| This driver implements the sysfs interface for the Corsair PSUs with a HID protocol |
| interface of the HXi and RMi series. |
| These power supplies provide access to a micro-controller with 2 attached |
| temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for |
| power usage and 4 sensors for current levels and addtional non-sensor information |
| like uptimes. |
| |
| Sysfs entries |
| ------------- |
| |
| ======================= ======================================================== |
| curr1_input Total current usage |
| curr2_input Current on the 12v psu rail |
| curr3_input Current on the 5v psu rail |
| curr4_input Current on the 3.3v psu rail |
| fan1_input RPM of psu fan |
| in0_input Voltage of the psu ac input |
| in1_input Voltage of the 12v psu rail |
| in2_input Voltage of the 5v psu rail |
| in3_input Voltage of the 3.3 psu rail |
| power1_input Total power usage |
| power2_input Power usage of the 12v psu rail |
| power3_input Power usage of the 5v psu rail |
| power4_input Power usage of the 3.3v psu rail |
| temp1_input Temperature of the psu vrm component |
| temp2_input Temperature of the psu case |
| ======================= ======================================================== |
| |
| Usage Notes |
| ----------- |
| |
| It is an USB HID device, so it is auto-detected and supports hot-swapping. |
| |
| Flickering values in the rail voltage levels can be an indicator for a failing |
| PSU. The driver also provides some additional useful values via debugfs, which |
| do not fit into the hwmon class. |
| |
| Debugfs entries |
| --------------- |
| |
| ======================= ======================================================== |
| uptime Current uptime of the psu |
| uptime_total Total uptime of the psu |
| vendor Vendor name of the psu |
| product Product name of the psu |
| ======================= ======================================================== |
