| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # IP netfilter configuration |
| # |
| |
| menu "IPv6: Netfilter Configuration" |
| depends on INET && IPV6 && NETFILTER |
| |
| config NF_SOCKET_IPV6 |
| tristate "IPv6 socket lookup support" |
| help |
| This option enables the IPv6 socket lookup infrastructure. This |
| is used by the {ip6,nf}tables socket match. |
| |
| config NF_TPROXY_IPV6 |
| tristate "IPv6 tproxy support" |
| |
| if NF_TABLES |
| |
| config NF_TABLES_IPV6 |
| bool "IPv6 nf_tables support" |
| help |
| This option enables the IPv6 support for nf_tables. |
| |
| if NF_TABLES_IPV6 |
| |
| config NFT_REJECT_IPV6 |
| select NF_REJECT_IPV6 |
| default NFT_REJECT |
| tristate |
| |
| config NFT_DUP_IPV6 |
| tristate "IPv6 nf_tables packet duplication support" |
| depends on !NF_CONNTRACK || NF_CONNTRACK |
| select NF_DUP_IPV6 |
| help |
| This module enables IPv6 packet duplication support for nf_tables. |
| |
| config NFT_FIB_IPV6 |
| tristate "nf_tables fib / ipv6 route lookup support" |
| select NFT_FIB |
| help |
| This module enables IPv6 FIB lookups, e.g. for reverse path filtering. |
| It also allows query of the FIB for the route type, e.g. local, unicast, |
| multicast or blackhole. |
| |
| endif # NF_TABLES_IPV6 |
| endif # NF_TABLES |
| |
| config NF_FLOW_TABLE_IPV6 |
| tristate |
| select NF_FLOW_TABLE_INET |
| |
| config NF_DUP_IPV6 |
| tristate "Netfilter IPv6 packet duplication to alternate destination" |
| depends on !NF_CONNTRACK || NF_CONNTRACK |
| help |
| This option enables the nf_dup_ipv6 core, which duplicates an IPv6 |
| packet to be rerouted to another destination. |
| |
| config NF_REJECT_IPV6 |
| tristate "IPv6 packet rejection" |
| default m if NETFILTER_ADVANCED=n |
| |
| config NF_LOG_IPV6 |
| tristate "IPv6 packet logging" |
| default m if NETFILTER_ADVANCED=n |
| select NF_LOG_SYSLOG |
| help |
| This is a backwards-compat option for the user's convenience |
| (e.g. when running oldconfig). It selects CONFIG_NF_LOG_SYSLOG. |
| |
| config IP6_NF_IPTABLES |
| tristate "IP6 tables support (required for filtering)" |
| depends on INET && IPV6 |
| select NETFILTER_XTABLES |
| default m if NETFILTER_ADVANCED=n |
| help |
| ip6tables is a general, extensible packet identification framework. |
| Currently only the packet filtering and packet mangling subsystem |
| for IPv6 use this, but connection tracking is going to follow. |
| Say 'Y' or 'M' here if you want to use either of those. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| if IP6_NF_IPTABLES |
| |
| # The simple matches. |
| config IP6_NF_MATCH_AH |
| tristate '"ah" match support' |
| depends on NETFILTER_ADVANCED |
| help |
| This module allows one to match AH packets. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_MATCH_EUI64 |
| tristate '"eui64" address check' |
| depends on NETFILTER_ADVANCED |
| help |
| This module performs checking on the IPv6 source address |
| Compares the last 64 bits with the EUI64 (delivered |
| from the MAC address) address |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_MATCH_FRAG |
| tristate '"frag" Fragmentation header match support' |
| depends on NETFILTER_ADVANCED |
| help |
| frag matching allows you to match packets based on the fragmentation |
| header of the packet. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_MATCH_OPTS |
| tristate '"hbh" hop-by-hop and "dst" opts header match support' |
| depends on NETFILTER_ADVANCED |
| help |
| This allows one to match packets based on the hop-by-hop |
| and destination options headers of a packet. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_MATCH_HL |
| tristate '"hl" hoplimit match support' |
| depends on NETFILTER_ADVANCED |
| select NETFILTER_XT_MATCH_HL |
| help |
| This is a backwards-compat option for the user's convenience |
| (e.g. when running oldconfig). It selects |
| CONFIG_NETFILTER_XT_MATCH_HL. |
| |
| config IP6_NF_MATCH_IPV6HEADER |
| tristate '"ipv6header" IPv6 Extension Headers Match' |
| default m if NETFILTER_ADVANCED=n |
| help |
| This module allows one to match packets based upon |
| the ipv6 extension headers. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_MATCH_MH |
| tristate '"mh" match support' |
| depends on NETFILTER_ADVANCED |
| help |
| This module allows one to match MH packets. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_MATCH_RPFILTER |
| tristate '"rpfilter" reverse path filter match support' |
| depends on NETFILTER_ADVANCED |
| depends on IP6_NF_MANGLE || IP6_NF_RAW |
| help |
| This option allows you to match packets whose replies would |
| go out via the interface the packet came in. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| The module will be called ip6t_rpfilter. |
| |
| config IP6_NF_MATCH_RT |
| tristate '"rt" Routing header match support' |
| depends on NETFILTER_ADVANCED |
| help |
| rt matching allows you to match packets based on the routing |
| header of the packet. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_MATCH_SRH |
| tristate '"srh" Segment Routing header match support' |
| depends on NETFILTER_ADVANCED |
| help |
| srh matching allows you to match packets based on the segment |
| routing header of the packet. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| # The targets |
| config IP6_NF_TARGET_HL |
| tristate '"HL" hoplimit target support' |
| depends on NETFILTER_ADVANCED && IP6_NF_MANGLE |
| select NETFILTER_XT_TARGET_HL |
| help |
| This is a backwards-compatible option for the user's convenience |
| (e.g. when running oldconfig). It selects |
| CONFIG_NETFILTER_XT_TARGET_HL. |
| |
| config IP6_NF_FILTER |
| tristate "Packet filtering" |
| default m if NETFILTER_ADVANCED=n |
| help |
| Packet filtering defines a table `filter', which has a series of |
| rules for simple packet filtering at local input, forwarding and |
| local output. See the man page for iptables(8). |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_TARGET_REJECT |
| tristate "REJECT target support" |
| depends on IP6_NF_FILTER |
| select NF_REJECT_IPV6 |
| default m if NETFILTER_ADVANCED=n |
| help |
| The REJECT target allows a filtering rule to specify that an ICMPv6 |
| error should be issued in response to an incoming packet, rather |
| than silently being dropped. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_TARGET_SYNPROXY |
| tristate "SYNPROXY target support" |
| depends on NF_CONNTRACK && NETFILTER_ADVANCED |
| select NETFILTER_SYNPROXY |
| select SYN_COOKIES |
| help |
| The SYNPROXY target allows you to intercept TCP connections and |
| establish them using syncookies before they are passed on to the |
| server. This allows to avoid conntrack and server resource usage |
| during SYN-flood attacks. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_MANGLE |
| tristate "Packet mangling" |
| default m if NETFILTER_ADVANCED=n |
| help |
| This option adds a `mangle' table to iptables: see the man page for |
| iptables(8). This table is used for various packet alterations |
| which can effect how the packet is routed. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| config IP6_NF_RAW |
| tristate 'raw table support (required for TRACE)' |
| help |
| This option adds a `raw' table to ip6tables. This table is the very |
| first in the netfilter framework and hooks in at the PREROUTING |
| and OUTPUT chains. |
| |
| If you want to compile it as a module, say M here and read |
| <file:Documentation/kbuild/modules.rst>. If unsure, say `N'. |
| |
| # security table for MAC policy |
| config IP6_NF_SECURITY |
| tristate "Security table" |
| depends on SECURITY |
| depends on NETFILTER_ADVANCED |
| help |
| This option adds a `security' table to iptables, for use |
| with Mandatory Access Control (MAC) policy. |
| |
| If unsure, say N. |
| |
| config IP6_NF_NAT |
| tristate "ip6tables NAT support" |
| depends on NF_CONNTRACK |
| depends on NETFILTER_ADVANCED |
| select NF_NAT |
| select NETFILTER_XT_NAT |
| help |
| This enables the `nat' table in ip6tables. This allows masquerading, |
| port forwarding and other forms of full Network Address Port |
| Translation. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| if IP6_NF_NAT |
| |
| config IP6_NF_TARGET_MASQUERADE |
| tristate "MASQUERADE target support" |
| select NETFILTER_XT_TARGET_MASQUERADE |
| help |
| This is a backwards-compat option for the user's convenience |
| (e.g. when running oldconfig). It selects NETFILTER_XT_TARGET_MASQUERADE. |
| |
| config IP6_NF_TARGET_NPT |
| tristate "NPT (Network Prefix translation) target support" |
| help |
| This option adds the `SNPT' and `DNPT' target, which perform |
| stateless IPv6-to-IPv6 Network Prefix Translation per RFC 6296. |
| |
| To compile it as a module, choose M here. If unsure, say N. |
| |
| endif # IP6_NF_NAT |
| |
| endif # IP6_NF_IPTABLES |
| endmenu |
| |
| config NF_DEFRAG_IPV6 |
| tristate |
