| What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl |
| Date: Jun 2018 |
| KernelVersion: 4.17 |
| Contact: thunderbolt-software@lists.01.org |
| Description: Holds a comma separated list of device unique_ids that |
| are allowed to be connected automatically during system |
| startup (e.g boot devices). The list always contains |
| maximum supported number of unique_ids where unused |
| entries are empty. This allows the userspace software |
| to determine how many entries the controller supports. |
| If there are multiple controllers, each controller has |
| its own ACL list and size may be different between the |
| controllers. |
| |
| System BIOS may have an option "Preboot ACL" or similar |
| that needs to be selected before this list is taken into |
| consideration. |
| |
| Software always updates a full list in each write. |
| |
| If a device is authorized automatically during boot its |
| boot attribute is set to 1. |
| |
| What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection |
| Date: Mar 2019 |
| KernelVersion: 4.21 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This attribute tells whether the system uses IOMMU |
| for DMA protection. Value of 1 means IOMMU is used 0 means |
| it is not (DMA protection is solely based on Thunderbolt |
| security levels). |
| |
| What: /sys/bus/thunderbolt/devices/.../domainX/security |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This attribute holds current Thunderbolt security level |
| set by the system BIOS. Possible values are: |
| |
| none: All devices are automatically authorized |
| user: Devices are only authorized based on writing |
| appropriate value to the authorized attribute |
| secure: Require devices that support secure connect at |
| minimum. User needs to authorize each device. |
| dponly: Automatically tunnel Display port (and USB). No |
| PCIe tunnels are created. |
| usbonly: Automatically tunnel USB controller of the |
| connected Thunderbolt dock (and Display Port). All |
| PCIe links downstream of the dock are removed. |
| |
| What: /sys/bus/thunderbolt/devices/.../authorized |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This attribute is used to authorize Thunderbolt devices |
| after they have been connected. If the device is not |
| authorized, no devices such as PCIe and Display port are |
| available to the system. |
| |
| Contents of this attribute will be 0 when the device is not |
| yet authorized. |
| |
| Possible values are supported: |
| 1: The device will be authorized and connected |
| |
| When key attribute contains 32 byte hex string the possible |
| values are: |
| 1: The 32 byte hex string is added to the device NVM and |
| the device is authorized. |
| 2: Send a challenge based on the 32 byte hex string. If the |
| challenge response from device is valid, the device is |
| authorized. In case of failure errno will be ENOKEY if |
| the device did not contain a key at all, and |
| EKEYREJECTED if the challenge response did not match. |
| |
| What: /sys/bus/thunderbolt/devices/.../boot |
| Date: Jun 2018 |
| KernelVersion: 4.17 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This attribute contains 1 if Thunderbolt device was already |
| authorized on boot and 0 otherwise. |
| |
| What: /sys/bus/thunderbolt/devices/.../generation |
| Date: Jan 2020 |
| KernelVersion: 5.5 |
| Contact: Christian Kellner <christian@kellner.me> |
| Description: This attribute contains the generation of the Thunderbolt |
| controller associated with the device. It will contain 4 |
| for USB4. |
| |
| What: /sys/bus/thunderbolt/devices/.../key |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: When a devices supports Thunderbolt secure connect it will |
| have this attribute. Writing 32 byte hex string changes |
| authorization to use the secure connection method instead. |
| Writing an empty string clears the key and regular connection |
| method can be used again. |
| |
| What: /sys/bus/thunderbolt/devices/.../device |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This attribute contains id of this device extracted from |
| the device DROM. |
| |
| What: /sys/bus/thunderbolt/devices/.../device_name |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This attribute contains name of this device extracted from |
| the device DROM. |
| |
| What: /sys/bus/thunderbolt/devices/.../rx_speed |
| Date: Jan 2020 |
| KernelVersion: 5.5 |
| Contact: Mika Westerberg <mika.westerberg@linux.intel.com> |
| Description: This attribute reports the device RX speed per lane. |
| All RX lanes run at the same speed. |
| |
| What: /sys/bus/thunderbolt/devices/.../rx_lanes |
| Date: Jan 2020 |
| KernelVersion: 5.5 |
| Contact: Mika Westerberg <mika.westerberg@linux.intel.com> |
| Description: This attribute reports number of RX lanes the device is |
| using simultaneusly through its upstream port. |
| |
| What: /sys/bus/thunderbolt/devices/.../tx_speed |
| Date: Jan 2020 |
| KernelVersion: 5.5 |
| Contact: Mika Westerberg <mika.westerberg@linux.intel.com> |
| Description: This attribute reports the TX speed per lane. |
| All TX lanes run at the same speed. |
| |
| What: /sys/bus/thunderbolt/devices/.../tx_lanes |
| Date: Jan 2020 |
| KernelVersion: 5.5 |
| Contact: Mika Westerberg <mika.westerberg@linux.intel.com> |
| Description: This attribute reports number of TX lanes the device is |
| using simultaneusly through its upstream port. |
| |
| What: /sys/bus/thunderbolt/devices/.../vendor |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This attribute contains vendor id of this device extracted |
| from the device DROM. |
| |
| What: /sys/bus/thunderbolt/devices/.../vendor_name |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This attribute contains vendor name of this device extracted |
| from the device DROM. |
| |
| What: /sys/bus/thunderbolt/devices/.../unique_id |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This attribute contains unique_id string of this device. |
| This is either read from hardware registers (UUID on |
| newer hardware) or based on UID from the device DROM. |
| Can be used to uniquely identify particular device. |
| |
| What: /sys/bus/thunderbolt/devices/.../nvm_version |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: If the device has upgradeable firmware the version |
| number is available here. Format: %x.%x, major.minor. |
| If the device is in safe mode reading the file returns |
| -ENODATA instead as the NVM version is not available. |
| |
| What: /sys/bus/thunderbolt/devices/.../nvm_authenticate |
| Date: Sep 2017 |
| KernelVersion: 4.13 |
| Contact: thunderbolt-software@lists.01.org |
| Description: When new NVM image is written to the non-active NVM |
| area (through non_activeX NVMem device), the |
| authentication procedure is started by writing to |
| this file. |
| If everything goes well, the device is |
| restarted with the new NVM firmware. If the image |
| verification fails an error code is returned instead. |
| |
| This file will accept writing values "1" or "2" |
| - Writing "1" will flush the image to the storage |
| area and authenticate the image in one action. |
| - Writing "2" will run some basic validation on the image |
| and flush it to the storage area. |
| |
| When read holds status of the last authentication |
| operation if an error occurred during the process. This |
| is directly the status value from the DMA configuration |
| based mailbox before the device is power cycled. Writing |
| 0 here clears the status. |
| |
| What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/key |
| Date: Jan 2018 |
| KernelVersion: 4.15 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This contains name of the property directory the XDomain |
| service exposes. This entry describes the protocol in |
| question. Following directories are already reserved by |
| the Apple XDomain specification: |
| |
| network: IP/ethernet over Thunderbolt |
| targetdm: Target disk mode protocol over Thunderbolt |
| extdisp: External display mode protocol over Thunderbolt |
| |
| What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias |
| Date: Jan 2018 |
| KernelVersion: 4.15 |
| Contact: thunderbolt-software@lists.01.org |
| Description: Stores the same MODALIAS value emitted by uevent for |
| the XDomain service. Format: tbtsvc:kSpNvNrN |
| |
| What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcid |
| Date: Jan 2018 |
| KernelVersion: 4.15 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This contains XDomain protocol identifier the XDomain |
| service supports. |
| |
| What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcvers |
| Date: Jan 2018 |
| KernelVersion: 4.15 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This contains XDomain protocol version the XDomain |
| service supports. |
| |
| What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcrevs |
| Date: Jan 2018 |
| KernelVersion: 4.15 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This contains XDomain software version the XDomain |
| service supports. |
| |
| What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcstns |
| Date: Jan 2018 |
| KernelVersion: 4.15 |
| Contact: thunderbolt-software@lists.01.org |
| Description: This contains XDomain service specific settings as |
| bitmask. Format: %x |
| |
| What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/device |
| Date: Oct 2020 |
| KernelVersion: v5.9 |
| Contact: Mika Westerberg <mika.westerberg@linux.intel.com> |
| Description: Retimer device identifier read from the hardware. |
| |
| What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_authenticate |
| Date: Oct 2020 |
| KernelVersion: v5.9 |
| Contact: Mika Westerberg <mika.westerberg@linux.intel.com> |
| Description: When new NVM image is written to the non-active NVM |
| area (through non_activeX NVMem device), the |
| authentication procedure is started by writing 1 to |
| this file. If everything goes well, the device is |
| restarted with the new NVM firmware. If the image |
| verification fails an error code is returned instead. |
| |
| When read holds status of the last authentication |
| operation if an error occurred during the process. |
| Format: %x. |
| |
| What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_version |
| Date: Oct 2020 |
| KernelVersion: v5.9 |
| Contact: Mika Westerberg <mika.westerberg@linux.intel.com> |
| Description: Holds retimer NVM version number. Format: %x.%x, major.minor. |
| |
| What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/vendor |
| Date: Oct 2020 |
| KernelVersion: v5.9 |
| Contact: Mika Westerberg <mika.westerberg@linux.intel.com> |
| Description: Retimer vendor identifier read from the hardware. |
| |
| What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect |
| Date: Oct 2020 |
| KernelVersion: v5.9 |
| Contact: Mario Limonciello <mario.limonciello@dell.com> |
| Description: For supported devices, automatically authenticate the new Thunderbolt |
| image when the device is disconnected from the host system. |
| |
| This file will accept writing values "1" or "2" |
| - Writing "1" will flush the image to the storage |
| area and prepare the device for authentication on disconnect. |
| - Writing "2" will run some basic validation on the image |
| and flush it to the storage area. |
