blob: b6ac927628b199e0d9dce0deaed3ef0df40e762a [file] [log] [blame]
/* SPDX-License-Identifier: ISC */
/*
* Copyright (c) 2004-2011 Atheros Communications Inc.
* Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
* Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com>
*/
#ifndef _SDIO_H_
#define _SDIO_H_
#define ATH10K_HIF_MBOX_BLOCK_SIZE 256
#define ATH10K_SDIO_MAX_BUFFER_SIZE 4096 /*Unsure of this constant*/
/* Mailbox address in SDIO address space */
#define ATH10K_HIF_MBOX_BASE_ADDR 0x1000
#define ATH10K_HIF_MBOX_WIDTH 0x800
#define ATH10K_HIF_MBOX_TOT_WIDTH \
(ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH)
#define ATH10K_HIF_MBOX0_EXT_BASE_ADDR 0x5000
#define ATH10K_HIF_MBOX0_EXT_WIDTH (36 * 1024)
#define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0 (56 * 1024)
#define ATH10K_HIF_MBOX1_EXT_WIDTH (36 * 1024)
#define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE (2 * 1024)
#define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \
(ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr))
#define ATH10K_HIF_MBOX_NUM_MAX 4
#define ATH10K_SDIO_BUS_REQUEST_MAX_NUM 1024
#define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ)
/* HTC runs over mailbox 0 */
#define ATH10K_HTC_MAILBOX 0
#define ATH10K_HTC_MAILBOX_MASK BIT(ATH10K_HTC_MAILBOX)
/* GMBOX addresses */
#define ATH10K_HIF_GMBOX_BASE_ADDR 0x7000
#define ATH10K_HIF_GMBOX_WIDTH 0x4000
/* Modified versions of the sdio.h macros.
* The macros in sdio.h can't be used easily with the FIELD_{PREP|GET}
* macros in bitfield.h, so we define our own macros here.
*/
#define ATH10K_SDIO_DRIVE_DTSX_MASK \
(SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT)
#define ATH10K_SDIO_DRIVE_DTSX_TYPE_B 0
#define ATH10K_SDIO_DRIVE_DTSX_TYPE_A 1
#define ATH10K_SDIO_DRIVE_DTSX_TYPE_C 2
#define ATH10K_SDIO_DRIVE_DTSX_TYPE_D 3
/* SDIO CCCR register definitions */
#define CCCR_SDIO_IRQ_MODE_REG 0xF0
#define CCCR_SDIO_IRQ_MODE_REG_SDIO3 0x16
#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR 0xF2
#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A 0x02
#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C 0x04
#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D 0x08
#define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS 0xF0
#define CCCR_SDIO_ASYNC_INT_DELAY_MASK 0xC0
/* mode to enable special 4-bit interrupt assertion without clock */
#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ BIT(0)
#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3 BIT(1)
#define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK 0x01
/* The theoretical maximum number of RX messages that can be fetched
* from the mbox interrupt handler in one loop is derived in the following
* way:
*
* Let's assume that each packet in a bundle of the maximum bundle size
* (HTC_HOST_MAX_MSG_PER_RX_BUNDLE) has the HTC header bundle count set
* to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE).
*
* in this case the driver must allocate
* (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2) skb's.
*/
#define ATH10K_SDIO_MAX_RX_MSGS \
(HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2)
#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL 0x00000868u
#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF
#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000
enum sdio_mbox_state {
SDIO_MBOX_UNKNOWN_STATE = 0,
SDIO_MBOX_REQUEST_TO_SLEEP_STATE = 1,
SDIO_MBOX_SLEEP_STATE = 2,
SDIO_MBOX_AWAKE_STATE = 3,
};
#define ATH10K_CIS_READ_WAIT_4_RTC_CYCLE_IN_US 125
#define ATH10K_CIS_RTC_STATE_ADDR 0x1138
#define ATH10K_CIS_RTC_STATE_ON 0x01
#define ATH10K_CIS_XTAL_SETTLE_DURATION_IN_US 1500
#define ATH10K_CIS_READ_RETRY 10
#define ATH10K_MIN_SLEEP_INACTIVITY_TIME_MS 50
/* TODO: remove this and use skb->cb instead, much cleaner approach */
struct ath10k_sdio_bus_request {
struct list_head list;
/* sdio address */
u32 address;
struct sk_buff *skb;
enum ath10k_htc_ep_id eid;
int status;
/* Specifies if the current request is an HTC message.
* If not, the eid is not applicable an the TX completion handler
* associated with the endpoint will not be invoked.
*/
bool htc_msg;
/* Completion that (if set) will be invoked for non HTC requests
* (htc_msg == false) when the request has been processed.
*/
struct completion *comp;
};
struct ath10k_sdio_rx_data {
struct sk_buff *skb;
size_t alloc_len;
size_t act_len;
enum ath10k_htc_ep_id eid;
bool part_of_bundle;
bool last_in_bundle;
bool trailer_only;
};
struct ath10k_sdio_irq_proc_regs {
u8 host_int_status;
u8 cpu_int_status;
u8 error_int_status;
u8 counter_int_status;
u8 mbox_frame;
u8 rx_lookahead_valid;
u8 host_int_status2;
u8 gmbox_rx_avail;
__le32 rx_lookahead[2 * ATH10K_HIF_MBOX_NUM_MAX];
__le32 int_status_enable;
};
struct ath10k_sdio_irq_enable_regs {
u8 int_status_en;
u8 cpu_int_status_en;
u8 err_int_status_en;
u8 cntr_int_status_en;
};
struct ath10k_sdio_irq_data {
/* protects irq_proc_reg and irq_en_reg below.
* We use a mutex here and not a spinlock since we will have the
* mutex locked while calling the sdio_memcpy_ functions.
* These function require non atomic context, and hence, spinlocks
* can be held while calling these functions.
*/
struct mutex mtx;
struct ath10k_sdio_irq_proc_regs *irq_proc_reg;
struct ath10k_sdio_irq_enable_regs *irq_en_reg;
};
struct ath10k_mbox_ext_info {
u32 htc_ext_addr;
u32 htc_ext_sz;
};
struct ath10k_mbox_info {
u32 htc_addr;
struct ath10k_mbox_ext_info ext_info[2];
u32 block_size;
u32 block_mask;
u32 gmbox_addr;
u32 gmbox_sz;
};
struct ath10k_sdio {
struct sdio_func *func;
struct ath10k_mbox_info mbox_info;
bool swap_mbox;
u32 mbox_addr[ATH10K_HTC_EP_COUNT];
u32 mbox_size[ATH10K_HTC_EP_COUNT];
/* available bus requests */
struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM];
/* free list of bus requests */
struct list_head bus_req_freeq;
struct sk_buff_head rx_head;
/* protects access to bus_req_freeq */
spinlock_t lock;
struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS];
size_t n_rx_pkts;
struct ath10k *ar;
struct ath10k_sdio_irq_data irq_data;
/* temporary buffer for sdio read.
* It is allocated when probe, and used for receive bundled packets,
* the read for bundled packets is not parallel, so it does not need
* protected.
*/
u8 *vsg_buffer;
/* temporary buffer for BMI requests */
u8 *bmi_buf;
bool is_disabled;
struct workqueue_struct *workqueue;
struct work_struct wr_async_work;
struct list_head wr_asyncq;
/* protects access to wr_asyncq */
spinlock_t wr_async_lock;
struct work_struct async_work_rx;
struct timer_list sleep_timer;
enum sdio_mbox_state mbox_state;
};
static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar)
{
return (struct ath10k_sdio *)ar->drv_priv;
}
#endif