blob: 8212c9de14f1f29e72f75b41bb83302f653d23c0 [file] [log] [blame]
// SPDX-License-Identifier: ISC
* Copyright (c) 2010 Broadcom Corporation
* Common types *
#include <net/cfg80211.h>
#include "fweh.h"
#define TOE_TX_CSUM_OL 0x00000001
#define TOE_RX_CSUM_OL 0x00000002
/* For supporting multiple interfaces */
#define BRCMF_MAX_IFS 16
/* Small, medium and maximum buffer size for dcmd
#define BRCMF_DCMD_SMLEN 256
#define BRCMF_DCMD_MEDLEN 1536
#define BRCMF_DCMD_MAXLEN 8192
/* IOCTL from host to device are limited in length. A device can only handle
* ethernet frame size. This limitation is to be applied by protocol layer.
/* Length of firmware version string stored for
* ethtool driver info which uses 32 bytes as well.
* struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info
* @pktslots: dynamic allocated array for ordering AMPDU packets.
* @flow_id: AMPDU flow identifier.
* @cur_idx: last AMPDU index from firmware.
* @exp_idx: expected next AMPDU index.
* @max_idx: maximum amount of packets per AMPDU.
* @pend_pkts: number of packets currently in @pktslots.
struct brcmf_ampdu_rx_reorder {
struct sk_buff **pktslots;
u8 flow_id;
u8 cur_idx;
u8 exp_idx;
u8 max_idx;
u8 pend_pkts;
/* Forward decls for struct brcmf_pub (see below) */
struct brcmf_proto; /* device communication protocol info */
struct brcmf_fws_info; /* firmware signalling info */
struct brcmf_mp_device; /* module paramateres, device specific */
* struct brcmf_rev_info
* The result field stores the error code of the
* revision info request from firmware. For the
* other fields see struct brcmf_rev_info_le in
* fwil_types.h
struct brcmf_rev_info {
int result;
u32 vendorid;
u32 deviceid;
u32 radiorev;
u32 corerev;
u32 boardid;
u32 boardvendor;
u32 boardrev;
u32 driverrev;
u32 ucoderev;
u32 bus;
char chipname[12];
u32 phytype;
u32 phyrev;
u32 anarev;
u32 chippkg;
u32 nvramrev;
/* Common structure for module and instance linkage */
struct brcmf_pub {
/* Linkage ponters */
struct brcmf_bus *bus_if;
struct brcmf_proto *proto;
struct wiphy *wiphy;
struct cfg80211_ops *ops;
struct brcmf_cfg80211_info *config;
/* Internal brcmf items */
uint hdrlen; /* Total BRCMF header length (proto + bus) */
/* Dongle media info */
u8 mac[ETH_ALEN]; /* MAC address obtained from dongle */
struct mac_address addresses[BRCMF_MAX_IFS];
struct brcmf_if *iflist[BRCMF_MAX_IFS];
s32 if2bss[BRCMF_MAX_IFS];
struct brcmf_if *mon_if;
struct mutex proto_block;
unsigned char proto_buf[BRCMF_DCMD_MAXLEN];
struct brcmf_fweh_info fweh;
struct brcmf_ampdu_rx_reorder
u32 feat_flags;
u32 chip_quirks;
struct brcmf_rev_info revinfo;
#ifdef DEBUG
struct dentry *dbgfs_dir;
struct notifier_block inetaddr_notifier;
struct notifier_block inet6addr_notifier;
struct brcmf_mp_device *settings;
struct work_struct bus_reset;
u8 clmver[BRCMF_DCMD_SMLEN];
/* forward declarations */
struct brcmf_cfg80211_vif;
struct brcmf_fws_mac_descriptor;
* enum brcmf_netif_stop_reason - reason for stopping netif queue.
* netif stopped due to firmware signalling flow control.
* netif stopped due to flowring full.
* netif stopped due to not being connected (STA mode).
enum brcmf_netif_stop_reason {
* struct brcmf_if - interface control information.
* @drvr: points to device related information.
* @vif: points to cfg80211 specific interface information.
* @ndev: associated network device.
* @multicast_work: worker object for multicast provisioning.
* @ndoffload_work: worker object for neighbor discovery offload configuration.
* @fws_desc: interface specific firmware-signalling descriptor.
* @ifidx: interface index in device firmware.
* @bsscfgidx: index of bss associated with this interface.
* @mac_addr: assigned mac address.
* @netif_stop: bitmap indicates reason why netif queues are stopped.
* @netif_stop_lock: spinlock for update netif_stop from multiple sources.
* @pend_8021x_cnt: tracks outstanding number of 802.1x frames.
* @pend_8021x_wait: used for signalling change in count.
* @fwil_fwerr: flag indicating fwil layer should return firmware error codes.
struct brcmf_if {
struct brcmf_pub *drvr;
struct brcmf_cfg80211_vif *vif;
struct net_device *ndev;
struct work_struct multicast_work;
struct work_struct ndoffload_work;
struct brcmf_fws_mac_descriptor *fws_desc;
int ifidx;
s32 bsscfgidx;
u8 mac_addr[ETH_ALEN];
u8 netif_stop;
spinlock_t netif_stop_lock;
atomic_t pend_8021x_cnt;
wait_queue_head_t pend_8021x_wait;
struct in6_addr ipv6_addr_tbl[NDOL_MAX_ENTRIES];
u8 ipv6addr_idx;
bool fwil_fwerr;
int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp);
/* Return pointer to interface name */
char *brcmf_ifname(struct brcmf_if *ifp);
struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
void brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable);
int brcmf_net_attach(struct brcmf_if *ifp, bool locked);
struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
bool is_p2pdev, const char *name, u8 *mac_addr);
void brcmf_remove_interface(struct brcmf_if *ifp, bool locked);
void brcmf_txflowblock_if(struct brcmf_if *ifp,
enum brcmf_netif_stop_reason reason, bool state);
void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb, bool inirq);
void brcmf_netif_mon_rx(struct brcmf_if *ifp, struct sk_buff *skb);
void brcmf_net_detach(struct net_device *ndev, bool locked);
int brcmf_net_mon_attach(struct brcmf_if *ifp);
void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
int __init brcmf_core_init(void);
void __exit brcmf_core_exit(void);
#endif /* BRCMFMAC_CORE_H */