| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * I2C bridge driver for the Greybus "generic" I2C module. |
| * |
| * Copyright 2014 Google Inc. |
| * Copyright 2014 Linaro Ltd. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/greybus.h> |
| |
| #include "gbphy.h" |
| |
| struct gb_i2c_device { |
| struct gb_connection *connection; |
| struct gbphy_device *gbphy_dev; |
| |
| u32 functionality; |
| |
| struct i2c_adapter adapter; |
| }; |
| |
| /* |
| * Map Greybus i2c functionality bits into Linux ones |
| */ |
| static u32 gb_i2c_functionality_map(u32 gb_i2c_functionality) |
| { |
| return gb_i2c_functionality; /* All bits the same for now */ |
| } |
| |
| /* |
| * Do initial setup of the i2c device. This includes verifying we |
| * can support it (based on the protocol version it advertises). |
| * If that's OK, we get and cached its functionality bits. |
| * |
| * Note: gb_i2c_dev->connection is assumed to have been valid. |
| */ |
| static int gb_i2c_device_setup(struct gb_i2c_device *gb_i2c_dev) |
| { |
| struct gb_i2c_functionality_response response; |
| u32 functionality; |
| int ret; |
| |
| ret = gb_operation_sync(gb_i2c_dev->connection, |
| GB_I2C_TYPE_FUNCTIONALITY, |
| NULL, 0, &response, sizeof(response)); |
| if (ret) |
| return ret; |
| |
| functionality = le32_to_cpu(response.functionality); |
| gb_i2c_dev->functionality = gb_i2c_functionality_map(functionality); |
| |
| return 0; |
| } |
| |
| /* |
| * Map Linux i2c_msg flags into Greybus i2c transfer op flags. |
| */ |
| static u16 gb_i2c_transfer_op_flags_map(u16 flags) |
| { |
| return flags; /* All flags the same for now */ |
| } |
| |
| static void |
| gb_i2c_fill_transfer_op(struct gb_i2c_transfer_op *op, struct i2c_msg *msg) |
| { |
| u16 flags = gb_i2c_transfer_op_flags_map(msg->flags); |
| |
| op->addr = cpu_to_le16(msg->addr); |
| op->flags = cpu_to_le16(flags); |
| op->size = cpu_to_le16(msg->len); |
| } |
| |
| static struct gb_operation * |
| gb_i2c_operation_create(struct gb_connection *connection, |
| struct i2c_msg *msgs, u32 msg_count) |
| { |
| struct gb_i2c_device *gb_i2c_dev = gb_connection_get_data(connection); |
| struct gb_i2c_transfer_request *request; |
| struct gb_operation *operation; |
| struct gb_i2c_transfer_op *op; |
| struct i2c_msg *msg; |
| u32 data_out_size = 0; |
| u32 data_in_size = 0; |
| size_t request_size; |
| void *data; |
| u16 op_count; |
| u32 i; |
| |
| if (msg_count > (u32)U16_MAX) { |
| dev_err(&gb_i2c_dev->gbphy_dev->dev, "msg_count (%u) too big\n", |
| msg_count); |
| return NULL; |
| } |
| op_count = (u16)msg_count; |
| |
| /* |
| * In addition to space for all message descriptors we need |
| * to have enough to hold all outbound message data. |
| */ |
| msg = msgs; |
| for (i = 0; i < msg_count; i++, msg++) |
| if (msg->flags & I2C_M_RD) |
| data_in_size += (u32)msg->len; |
| else |
| data_out_size += (u32)msg->len; |
| |
| request_size = sizeof(*request); |
| request_size += msg_count * sizeof(*op); |
| request_size += data_out_size; |
| |
| /* Response consists only of incoming data */ |
| operation = gb_operation_create(connection, GB_I2C_TYPE_TRANSFER, |
| request_size, data_in_size, GFP_KERNEL); |
| if (!operation) |
| return NULL; |
| |
| request = operation->request->payload; |
| request->op_count = cpu_to_le16(op_count); |
| /* Fill in the ops array */ |
| op = &request->ops[0]; |
| msg = msgs; |
| for (i = 0; i < msg_count; i++) |
| gb_i2c_fill_transfer_op(op++, msg++); |
| |
| if (!data_out_size) |
| return operation; |
| |
| /* Copy over the outgoing data; it starts after the last op */ |
| data = op; |
| msg = msgs; |
| for (i = 0; i < msg_count; i++) { |
| if (!(msg->flags & I2C_M_RD)) { |
| memcpy(data, msg->buf, msg->len); |
| data += msg->len; |
| } |
| msg++; |
| } |
| |
| return operation; |
| } |
| |
| static void gb_i2c_decode_response(struct i2c_msg *msgs, u32 msg_count, |
| struct gb_i2c_transfer_response *response) |
| { |
| struct i2c_msg *msg = msgs; |
| u8 *data; |
| u32 i; |
| |
| if (!response) |
| return; |
| data = response->data; |
| for (i = 0; i < msg_count; i++) { |
| if (msg->flags & I2C_M_RD) { |
| memcpy(msg->buf, data, msg->len); |
| data += msg->len; |
| } |
| msg++; |
| } |
| } |
| |
| /* |
| * Some i2c transfer operations return results that are expected. |
| */ |
| static bool gb_i2c_expected_transfer_error(int errno) |
| { |
| return errno == -EAGAIN || errno == -ENODEV; |
| } |
| |
| static int gb_i2c_transfer_operation(struct gb_i2c_device *gb_i2c_dev, |
| struct i2c_msg *msgs, u32 msg_count) |
| { |
| struct gb_connection *connection = gb_i2c_dev->connection; |
| struct device *dev = &gb_i2c_dev->gbphy_dev->dev; |
| struct gb_operation *operation; |
| int ret; |
| |
| operation = gb_i2c_operation_create(connection, msgs, msg_count); |
| if (!operation) |
| return -ENOMEM; |
| |
| ret = gbphy_runtime_get_sync(gb_i2c_dev->gbphy_dev); |
| if (ret) |
| goto exit_operation_put; |
| |
| ret = gb_operation_request_send_sync(operation); |
| if (!ret) { |
| struct gb_i2c_transfer_response *response; |
| |
| response = operation->response->payload; |
| gb_i2c_decode_response(msgs, msg_count, response); |
| ret = msg_count; |
| } else if (!gb_i2c_expected_transfer_error(ret)) { |
| dev_err(dev, "transfer operation failed (%d)\n", ret); |
| } |
| |
| gbphy_runtime_put_autosuspend(gb_i2c_dev->gbphy_dev); |
| |
| exit_operation_put: |
| gb_operation_put(operation); |
| |
| return ret; |
| } |
| |
| static int gb_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, |
| int msg_count) |
| { |
| struct gb_i2c_device *gb_i2c_dev; |
| |
| gb_i2c_dev = i2c_get_adapdata(adap); |
| |
| return gb_i2c_transfer_operation(gb_i2c_dev, msgs, msg_count); |
| } |
| |
| #if 0 |
| /* Later */ |
| static int gb_i2c_smbus_xfer(struct i2c_adapter *adap, |
| u16 addr, unsigned short flags, char read_write, |
| u8 command, int size, union i2c_smbus_data *data) |
| { |
| struct gb_i2c_device *gb_i2c_dev; |
| |
| gb_i2c_dev = i2c_get_adapdata(adap); |
| |
| return 0; |
| } |
| #endif |
| |
| static u32 gb_i2c_functionality(struct i2c_adapter *adap) |
| { |
| struct gb_i2c_device *gb_i2c_dev = i2c_get_adapdata(adap); |
| |
| return gb_i2c_dev->functionality; |
| } |
| |
| static const struct i2c_algorithm gb_i2c_algorithm = { |
| .master_xfer = gb_i2c_master_xfer, |
| /* .smbus_xfer = gb_i2c_smbus_xfer, */ |
| .functionality = gb_i2c_functionality, |
| }; |
| |
| static int gb_i2c_probe(struct gbphy_device *gbphy_dev, |
| const struct gbphy_device_id *id) |
| { |
| struct gb_connection *connection; |
| struct gb_i2c_device *gb_i2c_dev; |
| struct i2c_adapter *adapter; |
| int ret; |
| |
| gb_i2c_dev = kzalloc(sizeof(*gb_i2c_dev), GFP_KERNEL); |
| if (!gb_i2c_dev) |
| return -ENOMEM; |
| |
| connection = |
| gb_connection_create(gbphy_dev->bundle, |
| le16_to_cpu(gbphy_dev->cport_desc->id), |
| NULL); |
| if (IS_ERR(connection)) { |
| ret = PTR_ERR(connection); |
| goto exit_i2cdev_free; |
| } |
| |
| gb_i2c_dev->connection = connection; |
| gb_connection_set_data(connection, gb_i2c_dev); |
| gb_i2c_dev->gbphy_dev = gbphy_dev; |
| gb_gbphy_set_data(gbphy_dev, gb_i2c_dev); |
| |
| ret = gb_connection_enable(connection); |
| if (ret) |
| goto exit_connection_destroy; |
| |
| ret = gb_i2c_device_setup(gb_i2c_dev); |
| if (ret) |
| goto exit_connection_disable; |
| |
| /* Looks good; up our i2c adapter */ |
| adapter = &gb_i2c_dev->adapter; |
| adapter->owner = THIS_MODULE; |
| adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; |
| adapter->algo = &gb_i2c_algorithm; |
| /* adapter->algo_data = what? */ |
| |
| adapter->dev.parent = &gbphy_dev->dev; |
| snprintf(adapter->name, sizeof(adapter->name), "Greybus i2c adapter"); |
| i2c_set_adapdata(adapter, gb_i2c_dev); |
| |
| ret = i2c_add_adapter(adapter); |
| if (ret) |
| goto exit_connection_disable; |
| |
| gbphy_runtime_put_autosuspend(gbphy_dev); |
| return 0; |
| |
| exit_connection_disable: |
| gb_connection_disable(connection); |
| exit_connection_destroy: |
| gb_connection_destroy(connection); |
| exit_i2cdev_free: |
| kfree(gb_i2c_dev); |
| |
| return ret; |
| } |
| |
| static void gb_i2c_remove(struct gbphy_device *gbphy_dev) |
| { |
| struct gb_i2c_device *gb_i2c_dev = gb_gbphy_get_data(gbphy_dev); |
| struct gb_connection *connection = gb_i2c_dev->connection; |
| int ret; |
| |
| ret = gbphy_runtime_get_sync(gbphy_dev); |
| if (ret) |
| gbphy_runtime_get_noresume(gbphy_dev); |
| |
| i2c_del_adapter(&gb_i2c_dev->adapter); |
| gb_connection_disable(connection); |
| gb_connection_destroy(connection); |
| kfree(gb_i2c_dev); |
| } |
| |
| static const struct gbphy_device_id gb_i2c_id_table[] = { |
| { GBPHY_PROTOCOL(GREYBUS_PROTOCOL_I2C) }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(gbphy, gb_i2c_id_table); |
| |
| static struct gbphy_driver i2c_driver = { |
| .name = "i2c", |
| .probe = gb_i2c_probe, |
| .remove = gb_i2c_remove, |
| .id_table = gb_i2c_id_table, |
| }; |
| |
| module_gbphy_driver(i2c_driver); |
| MODULE_LICENSE("GPL v2"); |