| /* |
| * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation |
| * |
| * Rewrite, cleanup, new allocation schemes, virtual merging: |
| * Copyright (C) 2004 Olof Johansson, IBM Corporation |
| * and Ben. Herrenschmidt, IBM Corporation |
| * |
| * Dynamic DMA mapping support, bus-independent parts. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/bitmap.h> |
| #include <linux/iommu-helper.h> |
| #include <linux/crash_dump.h> |
| #include <linux/hash.h> |
| #include <linux/fault-inject.h> |
| #include <linux/pci.h> |
| #include <linux/iommu.h> |
| #include <linux/sched.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/iommu.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/kdump.h> |
| #include <asm/fadump.h> |
| #include <asm/vio.h> |
| #include <asm/tce.h> |
| |
| #define DBG(...) |
| |
| static int novmerge; |
| |
| static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int); |
| |
| static int __init setup_iommu(char *str) |
| { |
| if (!strcmp(str, "novmerge")) |
| novmerge = 1; |
| else if (!strcmp(str, "vmerge")) |
| novmerge = 0; |
| return 1; |
| } |
| |
| __setup("iommu=", setup_iommu); |
| |
| static DEFINE_PER_CPU(unsigned int, iommu_pool_hash); |
| |
| /* |
| * We precalculate the hash to avoid doing it on every allocation. |
| * |
| * The hash is important to spread CPUs across all the pools. For example, |
| * on a POWER7 with 4 way SMT we want interrupts on the primary threads and |
| * with 4 pools all primary threads would map to the same pool. |
| */ |
| static int __init setup_iommu_pool_hash(void) |
| { |
| unsigned int i; |
| |
| for_each_possible_cpu(i) |
| per_cpu(iommu_pool_hash, i) = hash_32(i, IOMMU_POOL_HASHBITS); |
| |
| return 0; |
| } |
| subsys_initcall(setup_iommu_pool_hash); |
| |
| #ifdef CONFIG_FAIL_IOMMU |
| |
| static DECLARE_FAULT_ATTR(fail_iommu); |
| |
| static int __init setup_fail_iommu(char *str) |
| { |
| return setup_fault_attr(&fail_iommu, str); |
| } |
| __setup("fail_iommu=", setup_fail_iommu); |
| |
| static bool should_fail_iommu(struct device *dev) |
| { |
| return dev->archdata.fail_iommu && should_fail(&fail_iommu, 1); |
| } |
| |
| static int __init fail_iommu_debugfs(void) |
| { |
| struct dentry *dir = fault_create_debugfs_attr("fail_iommu", |
| NULL, &fail_iommu); |
| |
| return PTR_ERR_OR_ZERO(dir); |
| } |
| late_initcall(fail_iommu_debugfs); |
| |
| static ssize_t fail_iommu_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%d\n", dev->archdata.fail_iommu); |
| } |
| |
| static ssize_t fail_iommu_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| int i; |
| |
| if (count > 0 && sscanf(buf, "%d", &i) > 0) |
| dev->archdata.fail_iommu = (i == 0) ? 0 : 1; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(fail_iommu, S_IRUGO|S_IWUSR, fail_iommu_show, |
| fail_iommu_store); |
| |
| static int fail_iommu_bus_notify(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct device *dev = data; |
| |
| if (action == BUS_NOTIFY_ADD_DEVICE) { |
| if (device_create_file(dev, &dev_attr_fail_iommu)) |
| pr_warn("Unable to create IOMMU fault injection sysfs " |
| "entries\n"); |
| } else if (action == BUS_NOTIFY_DEL_DEVICE) { |
| device_remove_file(dev, &dev_attr_fail_iommu); |
| } |
| |
| return 0; |
| } |
| |
| static struct notifier_block fail_iommu_bus_notifier = { |
| .notifier_call = fail_iommu_bus_notify |
| }; |
| |
| static int __init fail_iommu_setup(void) |
| { |
| #ifdef CONFIG_PCI |
| bus_register_notifier(&pci_bus_type, &fail_iommu_bus_notifier); |
| #endif |
| #ifdef CONFIG_IBMVIO |
| bus_register_notifier(&vio_bus_type, &fail_iommu_bus_notifier); |
| #endif |
| |
| return 0; |
| } |
| /* |
| * Must execute after PCI and VIO subsystem have initialised but before |
| * devices are probed. |
| */ |
| arch_initcall(fail_iommu_setup); |
| #else |
| static inline bool should_fail_iommu(struct device *dev) |
| { |
| return false; |
| } |
| #endif |
| |
| static unsigned long iommu_range_alloc(struct device *dev, |
| struct iommu_table *tbl, |
| unsigned long npages, |
| unsigned long *handle, |
| unsigned long mask, |
| unsigned int align_order) |
| { |
| unsigned long n, end, start; |
| unsigned long limit; |
| int largealloc = npages > 15; |
| int pass = 0; |
| unsigned long align_mask; |
| unsigned long boundary_size; |
| unsigned long flags; |
| unsigned int pool_nr; |
| struct iommu_pool *pool; |
| |
| align_mask = 0xffffffffffffffffl >> (64 - align_order); |
| |
| /* This allocator was derived from x86_64's bit string search */ |
| |
| /* Sanity check */ |
| if (unlikely(npages == 0)) { |
| if (printk_ratelimit()) |
| WARN_ON(1); |
| return DMA_ERROR_CODE; |
| } |
| |
| if (should_fail_iommu(dev)) |
| return DMA_ERROR_CODE; |
| |
| /* |
| * We don't need to disable preemption here because any CPU can |
| * safely use any IOMMU pool. |
| */ |
| pool_nr = __this_cpu_read(iommu_pool_hash) & (tbl->nr_pools - 1); |
| |
| if (largealloc) |
| pool = &(tbl->large_pool); |
| else |
| pool = &(tbl->pools[pool_nr]); |
| |
| spin_lock_irqsave(&(pool->lock), flags); |
| |
| again: |
| if ((pass == 0) && handle && *handle && |
| (*handle >= pool->start) && (*handle < pool->end)) |
| start = *handle; |
| else |
| start = pool->hint; |
| |
| limit = pool->end; |
| |
| /* The case below can happen if we have a small segment appended |
| * to a large, or when the previous alloc was at the very end of |
| * the available space. If so, go back to the initial start. |
| */ |
| if (start >= limit) |
| start = pool->start; |
| |
| if (limit + tbl->it_offset > mask) { |
| limit = mask - tbl->it_offset + 1; |
| /* If we're constrained on address range, first try |
| * at the masked hint to avoid O(n) search complexity, |
| * but on second pass, start at 0 in pool 0. |
| */ |
| if ((start & mask) >= limit || pass > 0) { |
| spin_unlock(&(pool->lock)); |
| pool = &(tbl->pools[0]); |
| spin_lock(&(pool->lock)); |
| start = pool->start; |
| } else { |
| start &= mask; |
| } |
| } |
| |
| if (dev) |
| boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, |
| 1 << tbl->it_page_shift); |
| else |
| boundary_size = ALIGN(1UL << 32, 1 << tbl->it_page_shift); |
| /* 4GB boundary for iseries_hv_alloc and iseries_hv_map */ |
| |
| n = iommu_area_alloc(tbl->it_map, limit, start, npages, tbl->it_offset, |
| boundary_size >> tbl->it_page_shift, align_mask); |
| if (n == -1) { |
| if (likely(pass == 0)) { |
| /* First try the pool from the start */ |
| pool->hint = pool->start; |
| pass++; |
| goto again; |
| |
| } else if (pass <= tbl->nr_pools) { |
| /* Now try scanning all the other pools */ |
| spin_unlock(&(pool->lock)); |
| pool_nr = (pool_nr + 1) & (tbl->nr_pools - 1); |
| pool = &tbl->pools[pool_nr]; |
| spin_lock(&(pool->lock)); |
| pool->hint = pool->start; |
| pass++; |
| goto again; |
| |
| } else { |
| /* Give up */ |
| spin_unlock_irqrestore(&(pool->lock), flags); |
| return DMA_ERROR_CODE; |
| } |
| } |
| |
| end = n + npages; |
| |
| /* Bump the hint to a new block for small allocs. */ |
| if (largealloc) { |
| /* Don't bump to new block to avoid fragmentation */ |
| pool->hint = end; |
| } else { |
| /* Overflow will be taken care of at the next allocation */ |
| pool->hint = (end + tbl->it_blocksize - 1) & |
| ~(tbl->it_blocksize - 1); |
| } |
| |
| /* Update handle for SG allocations */ |
| if (handle) |
| *handle = end; |
| |
| spin_unlock_irqrestore(&(pool->lock), flags); |
| |
| return n; |
| } |
| |
| static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl, |
| void *page, unsigned int npages, |
| enum dma_data_direction direction, |
| unsigned long mask, unsigned int align_order, |
| unsigned long attrs) |
| { |
| unsigned long entry; |
| dma_addr_t ret = DMA_ERROR_CODE; |
| int build_fail; |
| |
| entry = iommu_range_alloc(dev, tbl, npages, NULL, mask, align_order); |
| |
| if (unlikely(entry == DMA_ERROR_CODE)) |
| return DMA_ERROR_CODE; |
| |
| entry += tbl->it_offset; /* Offset into real TCE table */ |
| ret = entry << tbl->it_page_shift; /* Set the return dma address */ |
| |
| /* Put the TCEs in the HW table */ |
| build_fail = tbl->it_ops->set(tbl, entry, npages, |
| (unsigned long)page & |
| IOMMU_PAGE_MASK(tbl), direction, attrs); |
| |
| /* tbl->it_ops->set() only returns non-zero for transient errors. |
| * Clean up the table bitmap in this case and return |
| * DMA_ERROR_CODE. For all other errors the functionality is |
| * not altered. |
| */ |
| if (unlikely(build_fail)) { |
| __iommu_free(tbl, ret, npages); |
| return DMA_ERROR_CODE; |
| } |
| |
| /* Flush/invalidate TLB caches if necessary */ |
| if (tbl->it_ops->flush) |
| tbl->it_ops->flush(tbl); |
| |
| /* Make sure updates are seen by hardware */ |
| mb(); |
| |
| return ret; |
| } |
| |
| static bool iommu_free_check(struct iommu_table *tbl, dma_addr_t dma_addr, |
| unsigned int npages) |
| { |
| unsigned long entry, free_entry; |
| |
| entry = dma_addr >> tbl->it_page_shift; |
| free_entry = entry - tbl->it_offset; |
| |
| if (((free_entry + npages) > tbl->it_size) || |
| (entry < tbl->it_offset)) { |
| if (printk_ratelimit()) { |
| printk(KERN_INFO "iommu_free: invalid entry\n"); |
| printk(KERN_INFO "\tentry = 0x%lx\n", entry); |
| printk(KERN_INFO "\tdma_addr = 0x%llx\n", (u64)dma_addr); |
| printk(KERN_INFO "\tTable = 0x%llx\n", (u64)tbl); |
| printk(KERN_INFO "\tbus# = 0x%llx\n", (u64)tbl->it_busno); |
| printk(KERN_INFO "\tsize = 0x%llx\n", (u64)tbl->it_size); |
| printk(KERN_INFO "\tstartOff = 0x%llx\n", (u64)tbl->it_offset); |
| printk(KERN_INFO "\tindex = 0x%llx\n", (u64)tbl->it_index); |
| WARN_ON(1); |
| } |
| |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static struct iommu_pool *get_pool(struct iommu_table *tbl, |
| unsigned long entry) |
| { |
| struct iommu_pool *p; |
| unsigned long largepool_start = tbl->large_pool.start; |
| |
| /* The large pool is the last pool at the top of the table */ |
| if (entry >= largepool_start) { |
| p = &tbl->large_pool; |
| } else { |
| unsigned int pool_nr = entry / tbl->poolsize; |
| |
| BUG_ON(pool_nr > tbl->nr_pools); |
| p = &tbl->pools[pool_nr]; |
| } |
| |
| return p; |
| } |
| |
| static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, |
| unsigned int npages) |
| { |
| unsigned long entry, free_entry; |
| unsigned long flags; |
| struct iommu_pool *pool; |
| |
| entry = dma_addr >> tbl->it_page_shift; |
| free_entry = entry - tbl->it_offset; |
| |
| pool = get_pool(tbl, free_entry); |
| |
| if (!iommu_free_check(tbl, dma_addr, npages)) |
| return; |
| |
| tbl->it_ops->clear(tbl, entry, npages); |
| |
| spin_lock_irqsave(&(pool->lock), flags); |
| bitmap_clear(tbl->it_map, free_entry, npages); |
| spin_unlock_irqrestore(&(pool->lock), flags); |
| } |
| |
| static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, |
| unsigned int npages) |
| { |
| __iommu_free(tbl, dma_addr, npages); |
| |
| /* Make sure TLB cache is flushed if the HW needs it. We do |
| * not do an mb() here on purpose, it is not needed on any of |
| * the current platforms. |
| */ |
| if (tbl->it_ops->flush) |
| tbl->it_ops->flush(tbl); |
| } |
| |
| int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl, |
| struct scatterlist *sglist, int nelems, |
| unsigned long mask, enum dma_data_direction direction, |
| unsigned long attrs) |
| { |
| dma_addr_t dma_next = 0, dma_addr; |
| struct scatterlist *s, *outs, *segstart; |
| int outcount, incount, i, build_fail = 0; |
| unsigned int align; |
| unsigned long handle; |
| unsigned int max_seg_size; |
| |
| BUG_ON(direction == DMA_NONE); |
| |
| if ((nelems == 0) || !tbl) |
| return 0; |
| |
| outs = s = segstart = &sglist[0]; |
| outcount = 1; |
| incount = nelems; |
| handle = 0; |
| |
| /* Init first segment length for backout at failure */ |
| outs->dma_length = 0; |
| |
| DBG("sg mapping %d elements:\n", nelems); |
| |
| max_seg_size = dma_get_max_seg_size(dev); |
| for_each_sg(sglist, s, nelems, i) { |
| unsigned long vaddr, npages, entry, slen; |
| |
| slen = s->length; |
| /* Sanity check */ |
| if (slen == 0) { |
| dma_next = 0; |
| continue; |
| } |
| /* Allocate iommu entries for that segment */ |
| vaddr = (unsigned long) sg_virt(s); |
| npages = iommu_num_pages(vaddr, slen, IOMMU_PAGE_SIZE(tbl)); |
| align = 0; |
| if (tbl->it_page_shift < PAGE_SHIFT && slen >= PAGE_SIZE && |
| (vaddr & ~PAGE_MASK) == 0) |
| align = PAGE_SHIFT - tbl->it_page_shift; |
| entry = iommu_range_alloc(dev, tbl, npages, &handle, |
| mask >> tbl->it_page_shift, align); |
| |
| DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen); |
| |
| /* Handle failure */ |
| if (unlikely(entry == DMA_ERROR_CODE)) { |
| if (printk_ratelimit()) |
| dev_info(dev, "iommu_alloc failed, tbl %p " |
| "vaddr %lx npages %lu\n", tbl, vaddr, |
| npages); |
| goto failure; |
| } |
| |
| /* Convert entry to a dma_addr_t */ |
| entry += tbl->it_offset; |
| dma_addr = entry << tbl->it_page_shift; |
| dma_addr |= (s->offset & ~IOMMU_PAGE_MASK(tbl)); |
| |
| DBG(" - %lu pages, entry: %lx, dma_addr: %lx\n", |
| npages, entry, dma_addr); |
| |
| /* Insert into HW table */ |
| build_fail = tbl->it_ops->set(tbl, entry, npages, |
| vaddr & IOMMU_PAGE_MASK(tbl), |
| direction, attrs); |
| if(unlikely(build_fail)) |
| goto failure; |
| |
| /* If we are in an open segment, try merging */ |
| if (segstart != s) { |
| DBG(" - trying merge...\n"); |
| /* We cannot merge if: |
| * - allocated dma_addr isn't contiguous to previous allocation |
| */ |
| if (novmerge || (dma_addr != dma_next) || |
| (outs->dma_length + s->length > max_seg_size)) { |
| /* Can't merge: create a new segment */ |
| segstart = s; |
| outcount++; |
| outs = sg_next(outs); |
| DBG(" can't merge, new segment.\n"); |
| } else { |
| outs->dma_length += s->length; |
| DBG(" merged, new len: %ux\n", outs->dma_length); |
| } |
| } |
| |
| if (segstart == s) { |
| /* This is a new segment, fill entries */ |
| DBG(" - filling new segment.\n"); |
| outs->dma_address = dma_addr; |
| outs->dma_length = slen; |
| } |
| |
| /* Calculate next page pointer for contiguous check */ |
| dma_next = dma_addr + slen; |
| |
| DBG(" - dma next is: %lx\n", dma_next); |
| } |
| |
| /* Flush/invalidate TLB caches if necessary */ |
| if (tbl->it_ops->flush) |
| tbl->it_ops->flush(tbl); |
| |
| DBG("mapped %d elements:\n", outcount); |
| |
| /* For the sake of ppc_iommu_unmap_sg, we clear out the length in the |
| * next entry of the sglist if we didn't fill the list completely |
| */ |
| if (outcount < incount) { |
| outs = sg_next(outs); |
| outs->dma_address = DMA_ERROR_CODE; |
| outs->dma_length = 0; |
| } |
| |
| /* Make sure updates are seen by hardware */ |
| mb(); |
| |
| return outcount; |
| |
| failure: |
| for_each_sg(sglist, s, nelems, i) { |
| if (s->dma_length != 0) { |
| unsigned long vaddr, npages; |
| |
| vaddr = s->dma_address & IOMMU_PAGE_MASK(tbl); |
| npages = iommu_num_pages(s->dma_address, s->dma_length, |
| IOMMU_PAGE_SIZE(tbl)); |
| __iommu_free(tbl, vaddr, npages); |
| s->dma_address = DMA_ERROR_CODE; |
| s->dma_length = 0; |
| } |
| if (s == outs) |
| break; |
| } |
| return 0; |
| } |
| |
| |
| void ppc_iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, |
| int nelems, enum dma_data_direction direction, |
| unsigned long attrs) |
| { |
| struct scatterlist *sg; |
| |
| BUG_ON(direction == DMA_NONE); |
| |
| if (!tbl) |
| return; |
| |
| sg = sglist; |
| while (nelems--) { |
| unsigned int npages; |
| dma_addr_t dma_handle = sg->dma_address; |
| |
| if (sg->dma_length == 0) |
| break; |
| npages = iommu_num_pages(dma_handle, sg->dma_length, |
| IOMMU_PAGE_SIZE(tbl)); |
| __iommu_free(tbl, dma_handle, npages); |
| sg = sg_next(sg); |
| } |
| |
| /* Flush/invalidate TLBs if necessary. As for iommu_free(), we |
| * do not do an mb() here, the affected platforms do not need it |
| * when freeing. |
| */ |
| if (tbl->it_ops->flush) |
| tbl->it_ops->flush(tbl); |
| } |
| |
| static void iommu_table_clear(struct iommu_table *tbl) |
| { |
| /* |
| * In case of firmware assisted dump system goes through clean |
| * reboot process at the time of system crash. Hence it's safe to |
| * clear the TCE entries if firmware assisted dump is active. |
| */ |
| if (!is_kdump_kernel() || is_fadump_active()) { |
| /* Clear the table in case firmware left allocations in it */ |
| tbl->it_ops->clear(tbl, tbl->it_offset, tbl->it_size); |
| return; |
| } |
| |
| #ifdef CONFIG_CRASH_DUMP |
| if (tbl->it_ops->get) { |
| unsigned long index, tceval, tcecount = 0; |
| |
| /* Reserve the existing mappings left by the first kernel. */ |
| for (index = 0; index < tbl->it_size; index++) { |
| tceval = tbl->it_ops->get(tbl, index + tbl->it_offset); |
| /* |
| * Freed TCE entry contains 0x7fffffffffffffff on JS20 |
| */ |
| if (tceval && (tceval != 0x7fffffffffffffffUL)) { |
| __set_bit(index, tbl->it_map); |
| tcecount++; |
| } |
| } |
| |
| if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) { |
| printk(KERN_WARNING "TCE table is full; freeing "); |
| printk(KERN_WARNING "%d entries for the kdump boot\n", |
| KDUMP_MIN_TCE_ENTRIES); |
| for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES; |
| index < tbl->it_size; index++) |
| __clear_bit(index, tbl->it_map); |
| } |
| } |
| #endif |
| } |
| |
| /* |
| * Build a iommu_table structure. This contains a bit map which |
| * is used to manage allocation of the tce space. |
| */ |
| struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) |
| { |
| unsigned long sz; |
| static int welcomed = 0; |
| struct page *page; |
| unsigned int i; |
| struct iommu_pool *p; |
| |
| BUG_ON(!tbl->it_ops); |
| |
| /* number of bytes needed for the bitmap */ |
| sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long); |
| |
| page = alloc_pages_node(nid, GFP_KERNEL, get_order(sz)); |
| if (!page) |
| panic("iommu_init_table: Can't allocate %ld bytes\n", sz); |
| tbl->it_map = page_address(page); |
| memset(tbl->it_map, 0, sz); |
| |
| /* |
| * Reserve page 0 so it will not be used for any mappings. |
| * This avoids buggy drivers that consider page 0 to be invalid |
| * to crash the machine or even lose data. |
| */ |
| if (tbl->it_offset == 0) |
| set_bit(0, tbl->it_map); |
| |
| /* We only split the IOMMU table if we have 1GB or more of space */ |
| if ((tbl->it_size << tbl->it_page_shift) >= (1UL * 1024 * 1024 * 1024)) |
| tbl->nr_pools = IOMMU_NR_POOLS; |
| else |
| tbl->nr_pools = 1; |
| |
| /* We reserve the top 1/4 of the table for large allocations */ |
| tbl->poolsize = (tbl->it_size * 3 / 4) / tbl->nr_pools; |
| |
| for (i = 0; i < tbl->nr_pools; i++) { |
| p = &tbl->pools[i]; |
| spin_lock_init(&(p->lock)); |
| p->start = tbl->poolsize * i; |
| p->hint = p->start; |
| p->end = p->start + tbl->poolsize; |
| } |
| |
| p = &tbl->large_pool; |
| spin_lock_init(&(p->lock)); |
| p->start = tbl->poolsize * i; |
| p->hint = p->start; |
| p->end = tbl->it_size; |
| |
| iommu_table_clear(tbl); |
| |
| if (!welcomed) { |
| printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", |
| novmerge ? "disabled" : "enabled"); |
| welcomed = 1; |
| } |
| |
| return tbl; |
| } |
| |
| void iommu_free_table(struct iommu_table *tbl, const char *node_name) |
| { |
| unsigned long bitmap_sz; |
| unsigned int order; |
| |
| if (!tbl) |
| return; |
| |
| if (!tbl->it_map) { |
| kfree(tbl); |
| return; |
| } |
| |
| /* |
| * In case we have reserved the first bit, we should not emit |
| * the warning below. |
| */ |
| if (tbl->it_offset == 0) |
| clear_bit(0, tbl->it_map); |
| |
| /* verify that table contains no entries */ |
| if (!bitmap_empty(tbl->it_map, tbl->it_size)) |
| pr_warn("%s: Unexpected TCEs for %s\n", __func__, node_name); |
| |
| /* calculate bitmap size in bytes */ |
| bitmap_sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long); |
| |
| /* free bitmap */ |
| order = get_order(bitmap_sz); |
| free_pages((unsigned long) tbl->it_map, order); |
| |
| /* free table */ |
| kfree(tbl); |
| } |
| |
| /* Creates TCEs for a user provided buffer. The user buffer must be |
| * contiguous real kernel storage (not vmalloc). The address passed here |
| * comprises a page address and offset into that page. The dma_addr_t |
| * returned will point to the same byte within the page as was passed in. |
| */ |
| dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl, |
| struct page *page, unsigned long offset, size_t size, |
| unsigned long mask, enum dma_data_direction direction, |
| unsigned long attrs) |
| { |
| dma_addr_t dma_handle = DMA_ERROR_CODE; |
| void *vaddr; |
| unsigned long uaddr; |
| unsigned int npages, align; |
| |
| BUG_ON(direction == DMA_NONE); |
| |
| vaddr = page_address(page) + offset; |
| uaddr = (unsigned long)vaddr; |
| npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE(tbl)); |
| |
| if (tbl) { |
| align = 0; |
| if (tbl->it_page_shift < PAGE_SHIFT && size >= PAGE_SIZE && |
| ((unsigned long)vaddr & ~PAGE_MASK) == 0) |
| align = PAGE_SHIFT - tbl->it_page_shift; |
| |
| dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction, |
| mask >> tbl->it_page_shift, align, |
| attrs); |
| if (dma_handle == DMA_ERROR_CODE) { |
| if (printk_ratelimit()) { |
| dev_info(dev, "iommu_alloc failed, tbl %p " |
| "vaddr %p npages %d\n", tbl, vaddr, |
| npages); |
| } |
| } else |
| dma_handle |= (uaddr & ~IOMMU_PAGE_MASK(tbl)); |
| } |
| |
| return dma_handle; |
| } |
| |
| void iommu_unmap_page(struct iommu_table *tbl, dma_addr_t dma_handle, |
| size_t size, enum dma_data_direction direction, |
| unsigned long attrs) |
| { |
| unsigned int npages; |
| |
| BUG_ON(direction == DMA_NONE); |
| |
| if (tbl) { |
| npages = iommu_num_pages(dma_handle, size, |
| IOMMU_PAGE_SIZE(tbl)); |
| iommu_free(tbl, dma_handle, npages); |
| } |
| } |
| |
| /* Allocates a contiguous real buffer and creates mappings over it. |
| * Returns the virtual address of the buffer and sets dma_handle |
| * to the dma address (mapping) of the first page. |
| */ |
| void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, |
| size_t size, dma_addr_t *dma_handle, |
| unsigned long mask, gfp_t flag, int node) |
| { |
| void *ret = NULL; |
| dma_addr_t mapping; |
| unsigned int order; |
| unsigned int nio_pages, io_order; |
| struct page *page; |
| |
| size = PAGE_ALIGN(size); |
| order = get_order(size); |
| |
| /* |
| * Client asked for way too much space. This is checked later |
| * anyway. It is easier to debug here for the drivers than in |
| * the tce tables. |
| */ |
| if (order >= IOMAP_MAX_ORDER) { |
| dev_info(dev, "iommu_alloc_consistent size too large: 0x%lx\n", |
| size); |
| return NULL; |
| } |
| |
| if (!tbl) |
| return NULL; |
| |
| /* Alloc enough pages (and possibly more) */ |
| page = alloc_pages_node(node, flag, order); |
| if (!page) |
| return NULL; |
| ret = page_address(page); |
| memset(ret, 0, size); |
| |
| /* Set up tces to cover the allocated range */ |
| nio_pages = size >> tbl->it_page_shift; |
| io_order = get_iommu_order(size, tbl); |
| mapping = iommu_alloc(dev, tbl, ret, nio_pages, DMA_BIDIRECTIONAL, |
| mask >> tbl->it_page_shift, io_order, 0); |
| if (mapping == DMA_ERROR_CODE) { |
| free_pages((unsigned long)ret, order); |
| return NULL; |
| } |
| *dma_handle = mapping; |
| return ret; |
| } |
| |
| void iommu_free_coherent(struct iommu_table *tbl, size_t size, |
| void *vaddr, dma_addr_t dma_handle) |
| { |
| if (tbl) { |
| unsigned int nio_pages; |
| |
| size = PAGE_ALIGN(size); |
| nio_pages = size >> tbl->it_page_shift; |
| iommu_free(tbl, dma_handle, nio_pages); |
| size = PAGE_ALIGN(size); |
| free_pages((unsigned long)vaddr, get_order(size)); |
| } |
| } |
| |
| unsigned long iommu_direction_to_tce_perm(enum dma_data_direction dir) |
| { |
| switch (dir) { |
| case DMA_BIDIRECTIONAL: |
| return TCE_PCI_READ | TCE_PCI_WRITE; |
| case DMA_FROM_DEVICE: |
| return TCE_PCI_WRITE; |
| case DMA_TO_DEVICE: |
| return TCE_PCI_READ; |
| default: |
| return 0; |
| } |
| } |
| EXPORT_SYMBOL_GPL(iommu_direction_to_tce_perm); |
| |
| #ifdef CONFIG_IOMMU_API |
| /* |
| * SPAPR TCE API |
| */ |
| static void group_release(void *iommu_data) |
| { |
| struct iommu_table_group *table_group = iommu_data; |
| |
| table_group->group = NULL; |
| } |
| |
| void iommu_register_group(struct iommu_table_group *table_group, |
| int pci_domain_number, unsigned long pe_num) |
| { |
| struct iommu_group *grp; |
| char *name; |
| |
| grp = iommu_group_alloc(); |
| if (IS_ERR(grp)) { |
| pr_warn("powerpc iommu api: cannot create new group, err=%ld\n", |
| PTR_ERR(grp)); |
| return; |
| } |
| table_group->group = grp; |
| iommu_group_set_iommudata(grp, table_group, group_release); |
| name = kasprintf(GFP_KERNEL, "domain%d-pe%lx", |
| pci_domain_number, pe_num); |
| if (!name) |
| return; |
| iommu_group_set_name(grp, name); |
| kfree(name); |
| } |
| |
| enum dma_data_direction iommu_tce_direction(unsigned long tce) |
| { |
| if ((tce & TCE_PCI_READ) && (tce & TCE_PCI_WRITE)) |
| return DMA_BIDIRECTIONAL; |
| else if (tce & TCE_PCI_READ) |
| return DMA_TO_DEVICE; |
| else if (tce & TCE_PCI_WRITE) |
| return DMA_FROM_DEVICE; |
| else |
| return DMA_NONE; |
| } |
| EXPORT_SYMBOL_GPL(iommu_tce_direction); |
| |
| void iommu_flush_tce(struct iommu_table *tbl) |
| { |
| /* Flush/invalidate TLB caches if necessary */ |
| if (tbl->it_ops->flush) |
| tbl->it_ops->flush(tbl); |
| |
| /* Make sure updates are seen by hardware */ |
| mb(); |
| } |
| EXPORT_SYMBOL_GPL(iommu_flush_tce); |
| |
| int iommu_tce_clear_param_check(struct iommu_table *tbl, |
| unsigned long ioba, unsigned long tce_value, |
| unsigned long npages) |
| { |
| /* tbl->it_ops->clear() does not support any value but 0 */ |
| if (tce_value) |
| return -EINVAL; |
| |
| if (ioba & ~IOMMU_PAGE_MASK(tbl)) |
| return -EINVAL; |
| |
| ioba >>= tbl->it_page_shift; |
| if (ioba < tbl->it_offset) |
| return -EINVAL; |
| |
| if ((ioba + npages) > (tbl->it_offset + tbl->it_size)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(iommu_tce_clear_param_check); |
| |
| int iommu_tce_put_param_check(struct iommu_table *tbl, |
| unsigned long ioba, unsigned long tce) |
| { |
| if (tce & ~IOMMU_PAGE_MASK(tbl)) |
| return -EINVAL; |
| |
| if (ioba & ~IOMMU_PAGE_MASK(tbl)) |
| return -EINVAL; |
| |
| ioba >>= tbl->it_page_shift; |
| if (ioba < tbl->it_offset) |
| return -EINVAL; |
| |
| if ((ioba + 1) > (tbl->it_offset + tbl->it_size)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(iommu_tce_put_param_check); |
| |
| long iommu_tce_xchg(struct iommu_table *tbl, unsigned long entry, |
| unsigned long *hpa, enum dma_data_direction *direction) |
| { |
| long ret; |
| |
| ret = tbl->it_ops->exchange(tbl, entry, hpa, direction); |
| |
| if (!ret && ((*direction == DMA_FROM_DEVICE) || |
| (*direction == DMA_BIDIRECTIONAL))) |
| SetPageDirty(pfn_to_page(*hpa >> PAGE_SHIFT)); |
| |
| /* if (unlikely(ret)) |
| pr_err("iommu_tce: %s failed on hwaddr=%lx ioba=%lx kva=%lx ret=%d\n", |
| __func__, hwaddr, entry << tbl->it_page_shift, |
| hwaddr, ret); */ |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(iommu_tce_xchg); |
| |
| int iommu_take_ownership(struct iommu_table *tbl) |
| { |
| unsigned long flags, i, sz = (tbl->it_size + 7) >> 3; |
| int ret = 0; |
| |
| /* |
| * VFIO does not control TCE entries allocation and the guest |
| * can write new TCEs on top of existing ones so iommu_tce_build() |
| * must be able to release old pages. This functionality |
| * requires exchange() callback defined so if it is not |
| * implemented, we disallow taking ownership over the table. |
| */ |
| if (!tbl->it_ops->exchange) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&tbl->large_pool.lock, flags); |
| for (i = 0; i < tbl->nr_pools; i++) |
| spin_lock(&tbl->pools[i].lock); |
| |
| if (tbl->it_offset == 0) |
| clear_bit(0, tbl->it_map); |
| |
| if (!bitmap_empty(tbl->it_map, tbl->it_size)) { |
| pr_err("iommu_tce: it_map is not empty"); |
| ret = -EBUSY; |
| /* Restore bit#0 set by iommu_init_table() */ |
| if (tbl->it_offset == 0) |
| set_bit(0, tbl->it_map); |
| } else { |
| memset(tbl->it_map, 0xff, sz); |
| } |
| |
| for (i = 0; i < tbl->nr_pools; i++) |
| spin_unlock(&tbl->pools[i].lock); |
| spin_unlock_irqrestore(&tbl->large_pool.lock, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(iommu_take_ownership); |
| |
| void iommu_release_ownership(struct iommu_table *tbl) |
| { |
| unsigned long flags, i, sz = (tbl->it_size + 7) >> 3; |
| |
| spin_lock_irqsave(&tbl->large_pool.lock, flags); |
| for (i = 0; i < tbl->nr_pools; i++) |
| spin_lock(&tbl->pools[i].lock); |
| |
| memset(tbl->it_map, 0, sz); |
| |
| /* Restore bit#0 set by iommu_init_table() */ |
| if (tbl->it_offset == 0) |
| set_bit(0, tbl->it_map); |
| |
| for (i = 0; i < tbl->nr_pools; i++) |
| spin_unlock(&tbl->pools[i].lock); |
| spin_unlock_irqrestore(&tbl->large_pool.lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(iommu_release_ownership); |
| |
| int iommu_add_device(struct device *dev) |
| { |
| struct iommu_table *tbl; |
| struct iommu_table_group_link *tgl; |
| |
| /* |
| * The sysfs entries should be populated before |
| * binding IOMMU group. If sysfs entries isn't |
| * ready, we simply bail. |
| */ |
| if (!device_is_registered(dev)) |
| return -ENOENT; |
| |
| if (dev->iommu_group) { |
| pr_debug("%s: Skipping device %s with iommu group %d\n", |
| __func__, dev_name(dev), |
| iommu_group_id(dev->iommu_group)); |
| return -EBUSY; |
| } |
| |
| tbl = get_iommu_table_base(dev); |
| if (!tbl) { |
| pr_debug("%s: Skipping device %s with no tbl\n", |
| __func__, dev_name(dev)); |
| return 0; |
| } |
| |
| tgl = list_first_entry_or_null(&tbl->it_group_list, |
| struct iommu_table_group_link, next); |
| if (!tgl) { |
| pr_debug("%s: Skipping device %s with no group\n", |
| __func__, dev_name(dev)); |
| return 0; |
| } |
| pr_debug("%s: Adding %s to iommu group %d\n", |
| __func__, dev_name(dev), |
| iommu_group_id(tgl->table_group->group)); |
| |
| if (PAGE_SIZE < IOMMU_PAGE_SIZE(tbl)) { |
| pr_err("%s: Invalid IOMMU page size %lx (%lx) on %s\n", |
| __func__, IOMMU_PAGE_SIZE(tbl), |
| PAGE_SIZE, dev_name(dev)); |
| return -EINVAL; |
| } |
| |
| return iommu_group_add_device(tgl->table_group->group, dev); |
| } |
| EXPORT_SYMBOL_GPL(iommu_add_device); |
| |
| void iommu_del_device(struct device *dev) |
| { |
| /* |
| * Some devices might not have IOMMU table and group |
| * and we needn't detach them from the associated |
| * IOMMU groups |
| */ |
| if (!dev->iommu_group) { |
| pr_debug("iommu_tce: skipping device %s with no tbl\n", |
| dev_name(dev)); |
| return; |
| } |
| |
| iommu_group_remove_device(dev); |
| } |
| EXPORT_SYMBOL_GPL(iommu_del_device); |
| |
| static int tce_iommu_bus_notifier(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct device *dev = data; |
| |
| switch (action) { |
| case BUS_NOTIFY_ADD_DEVICE: |
| return iommu_add_device(dev); |
| case BUS_NOTIFY_DEL_DEVICE: |
| if (dev->iommu_group) |
| iommu_del_device(dev); |
| return 0; |
| default: |
| return 0; |
| } |
| } |
| |
| static struct notifier_block tce_iommu_bus_nb = { |
| .notifier_call = tce_iommu_bus_notifier, |
| }; |
| |
| int __init tce_iommu_bus_notifier_init(void) |
| { |
| bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb); |
| return 0; |
| } |
| #endif /* CONFIG_IOMMU_API */ |