| /* |
| * bpf_jit_comp64.c: eBPF JIT compiler |
| * |
| * Copyright 2016 Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> |
| * IBM Corporation |
| * |
| * Based on the powerpc classic BPF JIT compiler by Matt Evans |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; version 2 |
| * of the License. |
| */ |
| #include <linux/moduleloader.h> |
| #include <asm/cacheflush.h> |
| #include <linux/netdevice.h> |
| #include <linux/filter.h> |
| #include <linux/if_vlan.h> |
| #include <asm/kprobes.h> |
| |
| #include "bpf_jit64.h" |
| |
| int bpf_jit_enable __read_mostly; |
| |
| static void bpf_jit_fill_ill_insns(void *area, unsigned int size) |
| { |
| int *p = area; |
| |
| /* Fill whole space with trap instructions */ |
| while (p < (int *)((char *)area + size)) |
| *p++ = BREAKPOINT_INSTRUCTION; |
| } |
| |
| static inline void bpf_flush_icache(void *start, void *end) |
| { |
| smp_wmb(); |
| flush_icache_range((unsigned long)start, (unsigned long)end); |
| } |
| |
| static inline bool bpf_is_seen_register(struct codegen_context *ctx, int i) |
| { |
| return (ctx->seen & (1 << (31 - b2p[i]))); |
| } |
| |
| static inline void bpf_set_seen_register(struct codegen_context *ctx, int i) |
| { |
| ctx->seen |= (1 << (31 - b2p[i])); |
| } |
| |
| static inline bool bpf_has_stack_frame(struct codegen_context *ctx) |
| { |
| /* |
| * We only need a stack frame if: |
| * - we call other functions (kernel helpers), or |
| * - the bpf program uses its stack area |
| * The latter condition is deduced from the usage of BPF_REG_FP |
| */ |
| return ctx->seen & SEEN_FUNC || bpf_is_seen_register(ctx, BPF_REG_FP); |
| } |
| |
| static void bpf_jit_emit_skb_loads(u32 *image, struct codegen_context *ctx) |
| { |
| /* |
| * Load skb->len and skb->data_len |
| * r3 points to skb |
| */ |
| PPC_LWZ(b2p[SKB_HLEN_REG], 3, offsetof(struct sk_buff, len)); |
| PPC_LWZ(b2p[TMP_REG_1], 3, offsetof(struct sk_buff, data_len)); |
| /* header_len = len - data_len */ |
| PPC_SUB(b2p[SKB_HLEN_REG], b2p[SKB_HLEN_REG], b2p[TMP_REG_1]); |
| |
| /* skb->data pointer */ |
| PPC_BPF_LL(b2p[SKB_DATA_REG], 3, offsetof(struct sk_buff, data)); |
| } |
| |
| static void bpf_jit_emit_func_call(u32 *image, struct codegen_context *ctx, u64 func) |
| { |
| #ifdef PPC64_ELF_ABI_v1 |
| /* func points to the function descriptor */ |
| PPC_LI64(b2p[TMP_REG_2], func); |
| /* Load actual entry point from function descriptor */ |
| PPC_BPF_LL(b2p[TMP_REG_1], b2p[TMP_REG_2], 0); |
| /* ... and move it to LR */ |
| PPC_MTLR(b2p[TMP_REG_1]); |
| /* |
| * Load TOC from function descriptor at offset 8. |
| * We can clobber r2 since we get called through a |
| * function pointer (so caller will save/restore r2) |
| * and since we don't use a TOC ourself. |
| */ |
| PPC_BPF_LL(2, b2p[TMP_REG_2], 8); |
| #else |
| /* We can clobber r12 */ |
| PPC_FUNC_ADDR(12, func); |
| PPC_MTLR(12); |
| #endif |
| PPC_BLRL(); |
| } |
| |
| static void bpf_jit_build_prologue(u32 *image, struct codegen_context *ctx) |
| { |
| int i; |
| bool new_stack_frame = bpf_has_stack_frame(ctx); |
| |
| if (new_stack_frame) { |
| /* |
| * We need a stack frame, but we don't necessarily need to |
| * save/restore LR unless we call other functions |
| */ |
| if (ctx->seen & SEEN_FUNC) { |
| EMIT(PPC_INST_MFLR | __PPC_RT(R0)); |
| PPC_BPF_STL(0, 1, PPC_LR_STKOFF); |
| } |
| |
| PPC_BPF_STLU(1, 1, -BPF_PPC_STACKFRAME); |
| } |
| |
| /* |
| * Back up non-volatile regs -- BPF registers 6-10 |
| * If we haven't created our own stack frame, we save these |
| * in the protected zone below the previous stack frame |
| */ |
| for (i = BPF_REG_6; i <= BPF_REG_10; i++) |
| if (bpf_is_seen_register(ctx, i)) |
| PPC_BPF_STL(b2p[i], 1, |
| (new_stack_frame ? BPF_PPC_STACKFRAME : 0) - |
| (8 * (32 - b2p[i]))); |
| |
| /* |
| * Save additional non-volatile regs if we cache skb |
| * Also, setup skb data |
| */ |
| if (ctx->seen & SEEN_SKB) { |
| PPC_BPF_STL(b2p[SKB_HLEN_REG], 1, |
| BPF_PPC_STACKFRAME - (8 * (32 - b2p[SKB_HLEN_REG]))); |
| PPC_BPF_STL(b2p[SKB_DATA_REG], 1, |
| BPF_PPC_STACKFRAME - (8 * (32 - b2p[SKB_DATA_REG]))); |
| bpf_jit_emit_skb_loads(image, ctx); |
| } |
| |
| /* Setup frame pointer to point to the bpf stack area */ |
| if (bpf_is_seen_register(ctx, BPF_REG_FP)) |
| PPC_ADDI(b2p[BPF_REG_FP], 1, |
| BPF_PPC_STACKFRAME - BPF_PPC_STACK_SAVE); |
| } |
| |
| static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx) |
| { |
| int i; |
| bool new_stack_frame = bpf_has_stack_frame(ctx); |
| |
| /* Move result to r3 */ |
| PPC_MR(3, b2p[BPF_REG_0]); |
| |
| /* Restore NVRs */ |
| for (i = BPF_REG_6; i <= BPF_REG_10; i++) |
| if (bpf_is_seen_register(ctx, i)) |
| PPC_BPF_LL(b2p[i], 1, |
| (new_stack_frame ? BPF_PPC_STACKFRAME : 0) - |
| (8 * (32 - b2p[i]))); |
| |
| /* Restore non-volatile registers used for skb cache */ |
| if (ctx->seen & SEEN_SKB) { |
| PPC_BPF_LL(b2p[SKB_HLEN_REG], 1, |
| BPF_PPC_STACKFRAME - (8 * (32 - b2p[SKB_HLEN_REG]))); |
| PPC_BPF_LL(b2p[SKB_DATA_REG], 1, |
| BPF_PPC_STACKFRAME - (8 * (32 - b2p[SKB_DATA_REG]))); |
| } |
| |
| /* Tear down our stack frame */ |
| if (new_stack_frame) { |
| PPC_ADDI(1, 1, BPF_PPC_STACKFRAME); |
| if (ctx->seen & SEEN_FUNC) { |
| PPC_BPF_LL(0, 1, PPC_LR_STKOFF); |
| PPC_MTLR(0); |
| } |
| } |
| |
| PPC_BLR(); |
| } |
| |
| /* Assemble the body code between the prologue & epilogue */ |
| static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, |
| struct codegen_context *ctx, |
| u32 *addrs) |
| { |
| const struct bpf_insn *insn = fp->insnsi; |
| int flen = fp->len; |
| int i; |
| |
| /* Start of epilogue code - will only be valid 2nd pass onwards */ |
| u32 exit_addr = addrs[flen]; |
| |
| for (i = 0; i < flen; i++) { |
| u32 code = insn[i].code; |
| u32 dst_reg = b2p[insn[i].dst_reg]; |
| u32 src_reg = b2p[insn[i].src_reg]; |
| s16 off = insn[i].off; |
| s32 imm = insn[i].imm; |
| u64 imm64; |
| u8 *func; |
| u32 true_cond; |
| int stack_local_off; |
| |
| /* |
| * addrs[] maps a BPF bytecode address into a real offset from |
| * the start of the body code. |
| */ |
| addrs[i] = ctx->idx * 4; |
| |
| /* |
| * As an optimization, we note down which non-volatile registers |
| * are used so that we can only save/restore those in our |
| * prologue and epilogue. We do this here regardless of whether |
| * the actual BPF instruction uses src/dst registers or not |
| * (for instance, BPF_CALL does not use them). The expectation |
| * is that those instructions will have src_reg/dst_reg set to |
| * 0. Even otherwise, we just lose some prologue/epilogue |
| * optimization but everything else should work without |
| * any issues. |
| */ |
| if (dst_reg >= 24 && dst_reg <= 31) |
| bpf_set_seen_register(ctx, insn[i].dst_reg); |
| if (src_reg >= 24 && src_reg <= 31) |
| bpf_set_seen_register(ctx, insn[i].src_reg); |
| |
| switch (code) { |
| /* |
| * Arithmetic operations: ADD/SUB/MUL/DIV/MOD/NEG |
| */ |
| case BPF_ALU | BPF_ADD | BPF_X: /* (u32) dst += (u32) src */ |
| case BPF_ALU64 | BPF_ADD | BPF_X: /* dst += src */ |
| PPC_ADD(dst_reg, dst_reg, src_reg); |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_SUB | BPF_X: /* (u32) dst -= (u32) src */ |
| case BPF_ALU64 | BPF_SUB | BPF_X: /* dst -= src */ |
| PPC_SUB(dst_reg, dst_reg, src_reg); |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_ADD | BPF_K: /* (u32) dst += (u32) imm */ |
| case BPF_ALU | BPF_SUB | BPF_K: /* (u32) dst -= (u32) imm */ |
| case BPF_ALU64 | BPF_ADD | BPF_K: /* dst += imm */ |
| case BPF_ALU64 | BPF_SUB | BPF_K: /* dst -= imm */ |
| if (BPF_OP(code) == BPF_SUB) |
| imm = -imm; |
| if (imm) { |
| if (imm >= -32768 && imm < 32768) |
| PPC_ADDI(dst_reg, dst_reg, IMM_L(imm)); |
| else { |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| PPC_ADD(dst_reg, dst_reg, b2p[TMP_REG_1]); |
| } |
| } |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_MUL | BPF_X: /* (u32) dst *= (u32) src */ |
| case BPF_ALU64 | BPF_MUL | BPF_X: /* dst *= src */ |
| if (BPF_CLASS(code) == BPF_ALU) |
| PPC_MULW(dst_reg, dst_reg, src_reg); |
| else |
| PPC_MULD(dst_reg, dst_reg, src_reg); |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_MUL | BPF_K: /* (u32) dst *= (u32) imm */ |
| case BPF_ALU64 | BPF_MUL | BPF_K: /* dst *= imm */ |
| if (imm >= -32768 && imm < 32768) |
| PPC_MULI(dst_reg, dst_reg, IMM_L(imm)); |
| else { |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| if (BPF_CLASS(code) == BPF_ALU) |
| PPC_MULW(dst_reg, dst_reg, |
| b2p[TMP_REG_1]); |
| else |
| PPC_MULD(dst_reg, dst_reg, |
| b2p[TMP_REG_1]); |
| } |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_DIV | BPF_X: /* (u32) dst /= (u32) src */ |
| case BPF_ALU | BPF_MOD | BPF_X: /* (u32) dst %= (u32) src */ |
| PPC_CMPWI(src_reg, 0); |
| PPC_BCC_SHORT(COND_NE, (ctx->idx * 4) + 12); |
| PPC_LI(b2p[BPF_REG_0], 0); |
| PPC_JMP(exit_addr); |
| if (BPF_OP(code) == BPF_MOD) { |
| PPC_DIVWU(b2p[TMP_REG_1], dst_reg, src_reg); |
| PPC_MULW(b2p[TMP_REG_1], src_reg, |
| b2p[TMP_REG_1]); |
| PPC_SUB(dst_reg, dst_reg, b2p[TMP_REG_1]); |
| } else |
| PPC_DIVWU(dst_reg, dst_reg, src_reg); |
| goto bpf_alu32_trunc; |
| case BPF_ALU64 | BPF_DIV | BPF_X: /* dst /= src */ |
| case BPF_ALU64 | BPF_MOD | BPF_X: /* dst %= src */ |
| PPC_CMPDI(src_reg, 0); |
| PPC_BCC_SHORT(COND_NE, (ctx->idx * 4) + 12); |
| PPC_LI(b2p[BPF_REG_0], 0); |
| PPC_JMP(exit_addr); |
| if (BPF_OP(code) == BPF_MOD) { |
| PPC_DIVD(b2p[TMP_REG_1], dst_reg, src_reg); |
| PPC_MULD(b2p[TMP_REG_1], src_reg, |
| b2p[TMP_REG_1]); |
| PPC_SUB(dst_reg, dst_reg, b2p[TMP_REG_1]); |
| } else |
| PPC_DIVD(dst_reg, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_MOD | BPF_K: /* (u32) dst %= (u32) imm */ |
| case BPF_ALU | BPF_DIV | BPF_K: /* (u32) dst /= (u32) imm */ |
| case BPF_ALU64 | BPF_MOD | BPF_K: /* dst %= imm */ |
| case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */ |
| if (imm == 0) |
| return -EINVAL; |
| else if (imm == 1) |
| goto bpf_alu32_trunc; |
| |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| switch (BPF_CLASS(code)) { |
| case BPF_ALU: |
| if (BPF_OP(code) == BPF_MOD) { |
| PPC_DIVWU(b2p[TMP_REG_2], dst_reg, |
| b2p[TMP_REG_1]); |
| PPC_MULW(b2p[TMP_REG_1], |
| b2p[TMP_REG_1], |
| b2p[TMP_REG_2]); |
| PPC_SUB(dst_reg, dst_reg, |
| b2p[TMP_REG_1]); |
| } else |
| PPC_DIVWU(dst_reg, dst_reg, |
| b2p[TMP_REG_1]); |
| break; |
| case BPF_ALU64: |
| if (BPF_OP(code) == BPF_MOD) { |
| PPC_DIVD(b2p[TMP_REG_2], dst_reg, |
| b2p[TMP_REG_1]); |
| PPC_MULD(b2p[TMP_REG_1], |
| b2p[TMP_REG_1], |
| b2p[TMP_REG_2]); |
| PPC_SUB(dst_reg, dst_reg, |
| b2p[TMP_REG_1]); |
| } else |
| PPC_DIVD(dst_reg, dst_reg, |
| b2p[TMP_REG_1]); |
| break; |
| } |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_NEG: /* (u32) dst = -dst */ |
| case BPF_ALU64 | BPF_NEG: /* dst = -dst */ |
| PPC_NEG(dst_reg, dst_reg); |
| goto bpf_alu32_trunc; |
| |
| /* |
| * Logical operations: AND/OR/XOR/[A]LSH/[A]RSH |
| */ |
| case BPF_ALU | BPF_AND | BPF_X: /* (u32) dst = dst & src */ |
| case BPF_ALU64 | BPF_AND | BPF_X: /* dst = dst & src */ |
| PPC_AND(dst_reg, dst_reg, src_reg); |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_AND | BPF_K: /* (u32) dst = dst & imm */ |
| case BPF_ALU64 | BPF_AND | BPF_K: /* dst = dst & imm */ |
| if (!IMM_H(imm)) |
| PPC_ANDI(dst_reg, dst_reg, IMM_L(imm)); |
| else { |
| /* Sign-extended */ |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| PPC_AND(dst_reg, dst_reg, b2p[TMP_REG_1]); |
| } |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_OR | BPF_X: /* dst = (u32) dst | (u32) src */ |
| case BPF_ALU64 | BPF_OR | BPF_X: /* dst = dst | src */ |
| PPC_OR(dst_reg, dst_reg, src_reg); |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_OR | BPF_K:/* dst = (u32) dst | (u32) imm */ |
| case BPF_ALU64 | BPF_OR | BPF_K:/* dst = dst | imm */ |
| if (imm < 0 && BPF_CLASS(code) == BPF_ALU64) { |
| /* Sign-extended */ |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| PPC_OR(dst_reg, dst_reg, b2p[TMP_REG_1]); |
| } else { |
| if (IMM_L(imm)) |
| PPC_ORI(dst_reg, dst_reg, IMM_L(imm)); |
| if (IMM_H(imm)) |
| PPC_ORIS(dst_reg, dst_reg, IMM_H(imm)); |
| } |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_XOR | BPF_X: /* (u32) dst ^= src */ |
| case BPF_ALU64 | BPF_XOR | BPF_X: /* dst ^= src */ |
| PPC_XOR(dst_reg, dst_reg, src_reg); |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_XOR | BPF_K: /* (u32) dst ^= (u32) imm */ |
| case BPF_ALU64 | BPF_XOR | BPF_K: /* dst ^= imm */ |
| if (imm < 0 && BPF_CLASS(code) == BPF_ALU64) { |
| /* Sign-extended */ |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| PPC_XOR(dst_reg, dst_reg, b2p[TMP_REG_1]); |
| } else { |
| if (IMM_L(imm)) |
| PPC_XORI(dst_reg, dst_reg, IMM_L(imm)); |
| if (IMM_H(imm)) |
| PPC_XORIS(dst_reg, dst_reg, IMM_H(imm)); |
| } |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_LSH | BPF_X: /* (u32) dst <<= (u32) src */ |
| /* slw clears top 32 bits */ |
| PPC_SLW(dst_reg, dst_reg, src_reg); |
| break; |
| case BPF_ALU64 | BPF_LSH | BPF_X: /* dst <<= src; */ |
| PPC_SLD(dst_reg, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_LSH | BPF_K: /* (u32) dst <<== (u32) imm */ |
| /* with imm 0, we still need to clear top 32 bits */ |
| PPC_SLWI(dst_reg, dst_reg, imm); |
| break; |
| case BPF_ALU64 | BPF_LSH | BPF_K: /* dst <<== imm */ |
| if (imm != 0) |
| PPC_SLDI(dst_reg, dst_reg, imm); |
| break; |
| case BPF_ALU | BPF_RSH | BPF_X: /* (u32) dst >>= (u32) src */ |
| PPC_SRW(dst_reg, dst_reg, src_reg); |
| break; |
| case BPF_ALU64 | BPF_RSH | BPF_X: /* dst >>= src */ |
| PPC_SRD(dst_reg, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_RSH | BPF_K: /* (u32) dst >>= (u32) imm */ |
| PPC_SRWI(dst_reg, dst_reg, imm); |
| break; |
| case BPF_ALU64 | BPF_RSH | BPF_K: /* dst >>= imm */ |
| if (imm != 0) |
| PPC_SRDI(dst_reg, dst_reg, imm); |
| break; |
| case BPF_ALU64 | BPF_ARSH | BPF_X: /* (s64) dst >>= src */ |
| PPC_SRAD(dst_reg, dst_reg, src_reg); |
| break; |
| case BPF_ALU64 | BPF_ARSH | BPF_K: /* (s64) dst >>= imm */ |
| if (imm != 0) |
| PPC_SRADI(dst_reg, dst_reg, imm); |
| break; |
| |
| /* |
| * MOV |
| */ |
| case BPF_ALU | BPF_MOV | BPF_X: /* (u32) dst = src */ |
| case BPF_ALU64 | BPF_MOV | BPF_X: /* dst = src */ |
| PPC_MR(dst_reg, src_reg); |
| goto bpf_alu32_trunc; |
| case BPF_ALU | BPF_MOV | BPF_K: /* (u32) dst = imm */ |
| case BPF_ALU64 | BPF_MOV | BPF_K: /* dst = (s64) imm */ |
| PPC_LI32(dst_reg, imm); |
| if (imm < 0) |
| goto bpf_alu32_trunc; |
| break; |
| |
| bpf_alu32_trunc: |
| /* Truncate to 32-bits */ |
| if (BPF_CLASS(code) == BPF_ALU) |
| PPC_RLWINM(dst_reg, dst_reg, 0, 0, 31); |
| break; |
| |
| /* |
| * BPF_FROM_BE/LE |
| */ |
| case BPF_ALU | BPF_END | BPF_FROM_LE: |
| case BPF_ALU | BPF_END | BPF_FROM_BE: |
| #ifdef __BIG_ENDIAN__ |
| if (BPF_SRC(code) == BPF_FROM_BE) |
| goto emit_clear; |
| #else /* !__BIG_ENDIAN__ */ |
| if (BPF_SRC(code) == BPF_FROM_LE) |
| goto emit_clear; |
| #endif |
| switch (imm) { |
| case 16: |
| /* Rotate 8 bits left & mask with 0x0000ff00 */ |
| PPC_RLWINM(b2p[TMP_REG_1], dst_reg, 8, 16, 23); |
| /* Rotate 8 bits right & insert LSB to reg */ |
| PPC_RLWIMI(b2p[TMP_REG_1], dst_reg, 24, 24, 31); |
| /* Move result back to dst_reg */ |
| PPC_MR(dst_reg, b2p[TMP_REG_1]); |
| break; |
| case 32: |
| /* |
| * Rotate word left by 8 bits: |
| * 2 bytes are already in their final position |
| * -- byte 2 and 4 (of bytes 1, 2, 3 and 4) |
| */ |
| PPC_RLWINM(b2p[TMP_REG_1], dst_reg, 8, 0, 31); |
| /* Rotate 24 bits and insert byte 1 */ |
| PPC_RLWIMI(b2p[TMP_REG_1], dst_reg, 24, 0, 7); |
| /* Rotate 24 bits and insert byte 3 */ |
| PPC_RLWIMI(b2p[TMP_REG_1], dst_reg, 24, 16, 23); |
| PPC_MR(dst_reg, b2p[TMP_REG_1]); |
| break; |
| case 64: |
| /* |
| * Way easier and faster(?) to store the value |
| * into stack and then use ldbrx |
| * |
| * First, determine where in stack we can store |
| * this: |
| * - if we have allotted a stack frame, then we |
| * will utilize the area set aside by |
| * BPF_PPC_STACK_LOCALS |
| * - else, we use the area beneath the NV GPR |
| * save area |
| * |
| * ctx->seen will be reliable in pass2, but |
| * the instructions generated will remain the |
| * same across all passes |
| */ |
| if (bpf_has_stack_frame(ctx)) |
| stack_local_off = STACK_FRAME_MIN_SIZE; |
| else |
| stack_local_off = -(BPF_PPC_STACK_SAVE + 8); |
| |
| PPC_STD(dst_reg, 1, stack_local_off); |
| PPC_ADDI(b2p[TMP_REG_1], 1, stack_local_off); |
| PPC_LDBRX(dst_reg, 0, b2p[TMP_REG_1]); |
| break; |
| } |
| break; |
| |
| emit_clear: |
| switch (imm) { |
| case 16: |
| /* zero-extend 16 bits into 64 bits */ |
| PPC_RLDICL(dst_reg, dst_reg, 0, 48); |
| break; |
| case 32: |
| /* zero-extend 32 bits into 64 bits */ |
| PPC_RLDICL(dst_reg, dst_reg, 0, 32); |
| break; |
| case 64: |
| /* nop */ |
| break; |
| } |
| break; |
| |
| /* |
| * BPF_ST(X) |
| */ |
| case BPF_STX | BPF_MEM | BPF_B: /* *(u8 *)(dst + off) = src */ |
| case BPF_ST | BPF_MEM | BPF_B: /* *(u8 *)(dst + off) = imm */ |
| if (BPF_CLASS(code) == BPF_ST) { |
| PPC_LI(b2p[TMP_REG_1], imm); |
| src_reg = b2p[TMP_REG_1]; |
| } |
| PPC_STB(src_reg, dst_reg, off); |
| break; |
| case BPF_STX | BPF_MEM | BPF_H: /* (u16 *)(dst + off) = src */ |
| case BPF_ST | BPF_MEM | BPF_H: /* (u16 *)(dst + off) = imm */ |
| if (BPF_CLASS(code) == BPF_ST) { |
| PPC_LI(b2p[TMP_REG_1], imm); |
| src_reg = b2p[TMP_REG_1]; |
| } |
| PPC_STH(src_reg, dst_reg, off); |
| break; |
| case BPF_STX | BPF_MEM | BPF_W: /* *(u32 *)(dst + off) = src */ |
| case BPF_ST | BPF_MEM | BPF_W: /* *(u32 *)(dst + off) = imm */ |
| if (BPF_CLASS(code) == BPF_ST) { |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| src_reg = b2p[TMP_REG_1]; |
| } |
| PPC_STW(src_reg, dst_reg, off); |
| break; |
| case BPF_STX | BPF_MEM | BPF_DW: /* (u64 *)(dst + off) = src */ |
| case BPF_ST | BPF_MEM | BPF_DW: /* *(u64 *)(dst + off) = imm */ |
| if (BPF_CLASS(code) == BPF_ST) { |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| src_reg = b2p[TMP_REG_1]; |
| } |
| PPC_STD(src_reg, dst_reg, off); |
| break; |
| |
| /* |
| * BPF_STX XADD (atomic_add) |
| */ |
| /* *(u32 *)(dst + off) += src */ |
| case BPF_STX | BPF_XADD | BPF_W: |
| /* Get EA into TMP_REG_1 */ |
| PPC_ADDI(b2p[TMP_REG_1], dst_reg, off); |
| /* error if EA is not word-aligned */ |
| PPC_ANDI(b2p[TMP_REG_2], b2p[TMP_REG_1], 0x03); |
| PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + 12); |
| PPC_LI(b2p[BPF_REG_0], 0); |
| PPC_JMP(exit_addr); |
| /* load value from memory into TMP_REG_2 */ |
| PPC_BPF_LWARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0); |
| /* add value from src_reg into this */ |
| PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg); |
| /* store result back */ |
| PPC_BPF_STWCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]); |
| /* we're done if this succeeded */ |
| PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + (7*4)); |
| /* otherwise, let's try once more */ |
| PPC_BPF_LWARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0); |
| PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg); |
| PPC_BPF_STWCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]); |
| /* exit if the store was not successful */ |
| PPC_LI(b2p[BPF_REG_0], 0); |
| PPC_BCC(COND_NE, exit_addr); |
| break; |
| /* *(u64 *)(dst + off) += src */ |
| case BPF_STX | BPF_XADD | BPF_DW: |
| PPC_ADDI(b2p[TMP_REG_1], dst_reg, off); |
| /* error if EA is not doubleword-aligned */ |
| PPC_ANDI(b2p[TMP_REG_2], b2p[TMP_REG_1], 0x07); |
| PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + (3*4)); |
| PPC_LI(b2p[BPF_REG_0], 0); |
| PPC_JMP(exit_addr); |
| PPC_BPF_LDARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0); |
| PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg); |
| PPC_BPF_STDCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]); |
| PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + (7*4)); |
| PPC_BPF_LDARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0); |
| PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg); |
| PPC_BPF_STDCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]); |
| PPC_LI(b2p[BPF_REG_0], 0); |
| PPC_BCC(COND_NE, exit_addr); |
| break; |
| |
| /* |
| * BPF_LDX |
| */ |
| /* dst = *(u8 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_MEM | BPF_B: |
| PPC_LBZ(dst_reg, src_reg, off); |
| break; |
| /* dst = *(u16 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_MEM | BPF_H: |
| PPC_LHZ(dst_reg, src_reg, off); |
| break; |
| /* dst = *(u32 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_MEM | BPF_W: |
| PPC_LWZ(dst_reg, src_reg, off); |
| break; |
| /* dst = *(u64 *)(ul) (src + off) */ |
| case BPF_LDX | BPF_MEM | BPF_DW: |
| PPC_LD(dst_reg, src_reg, off); |
| break; |
| |
| /* |
| * Doubleword load |
| * 16 byte instruction that uses two 'struct bpf_insn' |
| */ |
| case BPF_LD | BPF_IMM | BPF_DW: /* dst = (u64) imm */ |
| imm64 = ((u64)(u32) insn[i].imm) | |
| (((u64)(u32) insn[i+1].imm) << 32); |
| /* Adjust for two bpf instructions */ |
| addrs[++i] = ctx->idx * 4; |
| PPC_LI64(dst_reg, imm64); |
| break; |
| |
| /* |
| * Return/Exit |
| */ |
| case BPF_JMP | BPF_EXIT: |
| /* |
| * If this isn't the very last instruction, branch to |
| * the epilogue. If we _are_ the last instruction, |
| * we'll just fall through to the epilogue. |
| */ |
| if (i != flen - 1) |
| PPC_JMP(exit_addr); |
| /* else fall through to the epilogue */ |
| break; |
| |
| /* |
| * Call kernel helper |
| */ |
| case BPF_JMP | BPF_CALL: |
| ctx->seen |= SEEN_FUNC; |
| func = (u8 *) __bpf_call_base + imm; |
| |
| /* Save skb pointer if we need to re-cache skb data */ |
| if (bpf_helper_changes_skb_data(func)) |
| PPC_BPF_STL(3, 1, STACK_FRAME_MIN_SIZE); |
| |
| bpf_jit_emit_func_call(image, ctx, (u64)func); |
| |
| /* move return value from r3 to BPF_REG_0 */ |
| PPC_MR(b2p[BPF_REG_0], 3); |
| |
| /* refresh skb cache */ |
| if (bpf_helper_changes_skb_data(func)) { |
| /* reload skb pointer to r3 */ |
| PPC_BPF_LL(3, 1, STACK_FRAME_MIN_SIZE); |
| bpf_jit_emit_skb_loads(image, ctx); |
| } |
| break; |
| |
| /* |
| * Jumps and branches |
| */ |
| case BPF_JMP | BPF_JA: |
| PPC_JMP(addrs[i + 1 + off]); |
| break; |
| |
| case BPF_JMP | BPF_JGT | BPF_K: |
| case BPF_JMP | BPF_JGT | BPF_X: |
| case BPF_JMP | BPF_JSGT | BPF_K: |
| case BPF_JMP | BPF_JSGT | BPF_X: |
| true_cond = COND_GT; |
| goto cond_branch; |
| case BPF_JMP | BPF_JGE | BPF_K: |
| case BPF_JMP | BPF_JGE | BPF_X: |
| case BPF_JMP | BPF_JSGE | BPF_K: |
| case BPF_JMP | BPF_JSGE | BPF_X: |
| true_cond = COND_GE; |
| goto cond_branch; |
| case BPF_JMP | BPF_JEQ | BPF_K: |
| case BPF_JMP | BPF_JEQ | BPF_X: |
| true_cond = COND_EQ; |
| goto cond_branch; |
| case BPF_JMP | BPF_JNE | BPF_K: |
| case BPF_JMP | BPF_JNE | BPF_X: |
| true_cond = COND_NE; |
| goto cond_branch; |
| case BPF_JMP | BPF_JSET | BPF_K: |
| case BPF_JMP | BPF_JSET | BPF_X: |
| true_cond = COND_NE; |
| /* Fall through */ |
| |
| cond_branch: |
| switch (code) { |
| case BPF_JMP | BPF_JGT | BPF_X: |
| case BPF_JMP | BPF_JGE | BPF_X: |
| case BPF_JMP | BPF_JEQ | BPF_X: |
| case BPF_JMP | BPF_JNE | BPF_X: |
| /* unsigned comparison */ |
| PPC_CMPLD(dst_reg, src_reg); |
| break; |
| case BPF_JMP | BPF_JSGT | BPF_X: |
| case BPF_JMP | BPF_JSGE | BPF_X: |
| /* signed comparison */ |
| PPC_CMPD(dst_reg, src_reg); |
| break; |
| case BPF_JMP | BPF_JSET | BPF_X: |
| PPC_AND_DOT(b2p[TMP_REG_1], dst_reg, src_reg); |
| break; |
| case BPF_JMP | BPF_JNE | BPF_K: |
| case BPF_JMP | BPF_JEQ | BPF_K: |
| case BPF_JMP | BPF_JGT | BPF_K: |
| case BPF_JMP | BPF_JGE | BPF_K: |
| /* |
| * Need sign-extended load, so only positive |
| * values can be used as imm in cmpldi |
| */ |
| if (imm >= 0 && imm < 32768) |
| PPC_CMPLDI(dst_reg, imm); |
| else { |
| /* sign-extending load */ |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| /* ... but unsigned comparison */ |
| PPC_CMPLD(dst_reg, b2p[TMP_REG_1]); |
| } |
| break; |
| case BPF_JMP | BPF_JSGT | BPF_K: |
| case BPF_JMP | BPF_JSGE | BPF_K: |
| /* |
| * signed comparison, so any 16-bit value |
| * can be used in cmpdi |
| */ |
| if (imm >= -32768 && imm < 32768) |
| PPC_CMPDI(dst_reg, imm); |
| else { |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| PPC_CMPD(dst_reg, b2p[TMP_REG_1]); |
| } |
| break; |
| case BPF_JMP | BPF_JSET | BPF_K: |
| /* andi does not sign-extend the immediate */ |
| if (imm >= 0 && imm < 32768) |
| /* PPC_ANDI is _only/always_ dot-form */ |
| PPC_ANDI(b2p[TMP_REG_1], dst_reg, imm); |
| else { |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| PPC_AND_DOT(b2p[TMP_REG_1], dst_reg, |
| b2p[TMP_REG_1]); |
| } |
| break; |
| } |
| PPC_BCC(true_cond, addrs[i + 1 + off]); |
| break; |
| |
| /* |
| * Loads from packet header/data |
| * Assume 32-bit input value in imm and X (src_reg) |
| */ |
| |
| /* Absolute loads */ |
| case BPF_LD | BPF_W | BPF_ABS: |
| func = (u8 *)CHOOSE_LOAD_FUNC(imm, sk_load_word); |
| goto common_load_abs; |
| case BPF_LD | BPF_H | BPF_ABS: |
| func = (u8 *)CHOOSE_LOAD_FUNC(imm, sk_load_half); |
| goto common_load_abs; |
| case BPF_LD | BPF_B | BPF_ABS: |
| func = (u8 *)CHOOSE_LOAD_FUNC(imm, sk_load_byte); |
| common_load_abs: |
| /* |
| * Load from [imm] |
| * Load into r4, which can just be passed onto |
| * skb load helpers as the second parameter |
| */ |
| PPC_LI32(4, imm); |
| goto common_load; |
| |
| /* Indirect loads */ |
| case BPF_LD | BPF_W | BPF_IND: |
| func = (u8 *)sk_load_word; |
| goto common_load_ind; |
| case BPF_LD | BPF_H | BPF_IND: |
| func = (u8 *)sk_load_half; |
| goto common_load_ind; |
| case BPF_LD | BPF_B | BPF_IND: |
| func = (u8 *)sk_load_byte; |
| common_load_ind: |
| /* |
| * Load from [src_reg + imm] |
| * Treat src_reg as a 32-bit value |
| */ |
| PPC_EXTSW(4, src_reg); |
| if (imm) { |
| if (imm >= -32768 && imm < 32768) |
| PPC_ADDI(4, 4, IMM_L(imm)); |
| else { |
| PPC_LI32(b2p[TMP_REG_1], imm); |
| PPC_ADD(4, 4, b2p[TMP_REG_1]); |
| } |
| } |
| |
| common_load: |
| ctx->seen |= SEEN_SKB; |
| ctx->seen |= SEEN_FUNC; |
| bpf_jit_emit_func_call(image, ctx, (u64)func); |
| |
| /* |
| * Helper returns 'lt' condition on error, and an |
| * appropriate return value in BPF_REG_0 |
| */ |
| PPC_BCC(COND_LT, exit_addr); |
| break; |
| |
| /* |
| * TODO: Tail call |
| */ |
| case BPF_JMP | BPF_CALL | BPF_X: |
| |
| default: |
| /* |
| * The filter contains something cruel & unusual. |
| * We don't handle it, but also there shouldn't be |
| * anything missing from our list. |
| */ |
| pr_err_ratelimited("eBPF filter opcode %04x (@%d) unsupported\n", |
| code, i); |
| return -ENOTSUPP; |
| } |
| } |
| |
| /* Set end-of-body-code address for exit. */ |
| addrs[i] = ctx->idx * 4; |
| |
| return 0; |
| } |
| |
| void bpf_jit_compile(struct bpf_prog *fp) { } |
| |
| struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) |
| { |
| u32 proglen; |
| u32 alloclen; |
| u8 *image = NULL; |
| u32 *code_base; |
| u32 *addrs; |
| struct codegen_context cgctx; |
| int pass; |
| int flen; |
| struct bpf_binary_header *bpf_hdr; |
| |
| if (!bpf_jit_enable) |
| return fp; |
| |
| flen = fp->len; |
| addrs = kzalloc((flen+1) * sizeof(*addrs), GFP_KERNEL); |
| if (addrs == NULL) |
| return fp; |
| |
| cgctx.idx = 0; |
| cgctx.seen = 0; |
| /* Scouting faux-generate pass 0 */ |
| if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) |
| /* We hit something illegal or unsupported. */ |
| goto out; |
| |
| /* |
| * Pretend to build prologue, given the features we've seen. This will |
| * update ctgtx.idx as it pretends to output instructions, then we can |
| * calculate total size from idx. |
| */ |
| bpf_jit_build_prologue(0, &cgctx); |
| bpf_jit_build_epilogue(0, &cgctx); |
| |
| proglen = cgctx.idx * 4; |
| alloclen = proglen + FUNCTION_DESCR_SIZE; |
| |
| bpf_hdr = bpf_jit_binary_alloc(alloclen, &image, 4, |
| bpf_jit_fill_ill_insns); |
| if (!bpf_hdr) |
| goto out; |
| |
| code_base = (u32 *)(image + FUNCTION_DESCR_SIZE); |
| |
| /* Code generation passes 1-2 */ |
| for (pass = 1; pass < 3; pass++) { |
| /* Now build the prologue, body code & epilogue for real. */ |
| cgctx.idx = 0; |
| bpf_jit_build_prologue(code_base, &cgctx); |
| bpf_jit_build_body(fp, code_base, &cgctx, addrs); |
| bpf_jit_build_epilogue(code_base, &cgctx); |
| |
| if (bpf_jit_enable > 1) |
| pr_info("Pass %d: shrink = %d, seen = 0x%x\n", pass, |
| proglen - (cgctx.idx * 4), cgctx.seen); |
| } |
| |
| if (bpf_jit_enable > 1) |
| /* |
| * Note that we output the base address of the code_base |
| * rather than image, since opcodes are in code_base. |
| */ |
| bpf_jit_dump(flen, proglen, pass, code_base); |
| |
| if (image) { |
| bpf_flush_icache(bpf_hdr, image + alloclen); |
| #ifdef PPC64_ELF_ABI_v1 |
| /* Function descriptor nastiness: Address + TOC */ |
| ((u64 *)image)[0] = (u64)code_base; |
| ((u64 *)image)[1] = local_paca->kernel_toc; |
| #endif |
| fp->bpf_func = (void *)image; |
| fp->jited = 1; |
| } |
| |
| out: |
| kfree(addrs); |
| return fp; |
| } |
| |
| void bpf_jit_free(struct bpf_prog *fp) |
| { |
| unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK; |
| struct bpf_binary_header *bpf_hdr = (void *)addr; |
| |
| if (fp->jited) |
| bpf_jit_binary_free(bpf_hdr); |
| |
| bpf_prog_unlock_free(fp); |
| } |