blob: a3ffd1b0c9bc6c18edbc143cc7448b8dfc2d422d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
<http://rt2x00.serialmonkey.com>
*/
/*
Module: rt2800usb
Abstract: rt2800usb device specific routines.
Supported chipsets: RT2800U.
*/
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "rt2x00.h"
#include "rt2x00usb.h"
#include "rt2800lib.h"
#include "rt2800.h"
#include "rt2800usb.h"
/*
* Allow hardware encryption to be disabled.
*/
static bool modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, 0444);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
static bool rt2800usb_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
{
return modparam_nohwcrypt;
}
/*
* Queue handlers.
*/
static void rt2800usb_start_queue(struct data_queue *queue)
{
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
u32 reg;
switch (queue->qid) {
case QID_RX:
reg = rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL);
rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
break;
case QID_BEACON:
reg = rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG);
rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
break;
default:
break;
}
}
static void rt2800usb_stop_queue(struct data_queue *queue)
{
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
u32 reg;
switch (queue->qid) {
case QID_RX:
reg = rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL);
rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
break;
case QID_BEACON:
reg = rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG);
rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
break;
default:
break;
}
}
#define TXSTATUS_READ_INTERVAL 1000000
static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
int urb_status, u32 tx_status)
{
bool valid;
if (urb_status) {
rt2x00_warn(rt2x00dev, "TX status read failed %d\n",
urb_status);
goto stop_reading;
}
valid = rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID);
if (valid) {
if (!kfifo_put(&rt2x00dev->txstatus_fifo, tx_status))
rt2x00_warn(rt2x00dev, "TX status FIFO overrun\n");
queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
/* Reschedule urb to read TX status again instantly */
return true;
}
/* Check if there is any entry that timedout waiting on TX status */
if (rt2800_txstatus_timeout(rt2x00dev))
queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
if (rt2800_txstatus_pending(rt2x00dev)) {
/* Read register after 1 ms */
hrtimer_start(&rt2x00dev->txstatus_timer,
TXSTATUS_READ_INTERVAL,
HRTIMER_MODE_REL);
return false;
}
stop_reading:
clear_bit(TX_STATUS_READING, &rt2x00dev->flags);
/*
* There is small race window above, between txstatus pending check and
* clear_bit someone could do rt2x00usb_interrupt_txdone, so recheck
* here again if status reading is needed.
*/
if (rt2800_txstatus_pending(rt2x00dev) &&
!test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
return true;
else
return false;
}
static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev)
{
if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
return;
/* Read TX_STA_FIFO register after 2 ms */
hrtimer_start(&rt2x00dev->txstatus_timer,
2 * TXSTATUS_READ_INTERVAL,
HRTIMER_MODE_REL);
}
static void rt2800usb_tx_dma_done(struct queue_entry *entry)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
rt2800usb_async_read_tx_status(rt2x00dev);
}
static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer)
{
struct rt2x00_dev *rt2x00dev =
container_of(timer, struct rt2x00_dev, txstatus_timer);
rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
rt2800usb_tx_sta_fifo_read_completed);
return HRTIMER_NORESTART;
}
/*
* Firmware functions
*/
static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev)
{
__le32 *reg;
u32 fw_mode;
int ret;
reg = kmalloc(sizeof(*reg), GFP_KERNEL);
if (reg == NULL)
return -ENOMEM;
/* cannot use rt2x00usb_register_read here as it uses different
* mode (MULTI_READ vs. DEVICE_MODE) and does not pass the
* magic value USB_MODE_AUTORUN (0x11) to the device, thus the
* returned value would be invalid.
*/
ret = rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE,
USB_VENDOR_REQUEST_IN, 0,
USB_MODE_AUTORUN, reg, sizeof(*reg),
REGISTER_TIMEOUT_FIRMWARE);
fw_mode = le32_to_cpu(*reg);
kfree(reg);
if (ret < 0)
return ret;
if ((fw_mode & 0x00000003) == 2)
return 1;
return 0;
}
static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
{
return FIRMWARE_RT2870;
}
static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
int status;
u32 offset;
u32 length;
int retval;
/*
* Check which section of the firmware we need.
*/
if (rt2x00_rt(rt2x00dev, RT2860) ||
rt2x00_rt(rt2x00dev, RT2872) ||
rt2x00_rt(rt2x00dev, RT3070)) {
offset = 0;
length = 4096;
} else {
offset = 4096;
length = 4096;
}
/*
* Write firmware to device.
*/
retval = rt2800usb_autorun_detect(rt2x00dev);
if (retval < 0)
return retval;
if (retval) {
rt2x00_info(rt2x00dev,
"Firmware loading not required - NIC in AutoRun mode\n");
__clear_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
} else {
rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
data + offset, length);
}
rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
/*
* Send firmware request to device to load firmware,
* we need to specify a long timeout time.
*/
status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
0, USB_MODE_FIRMWARE,
REGISTER_TIMEOUT_FIRMWARE);
if (status < 0) {
rt2x00_err(rt2x00dev, "Failed to write Firmware to device\n");
return status;
}
msleep(10);
rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
return 0;
}
/*
* Device state switch handlers.
*/
static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
/*
* Wait until BBP and RF are ready.
*/
if (rt2800_wait_csr_ready(rt2x00dev))
return -EBUSY;
reg = rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL);
rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
reg = 0;
rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
USB_MODE_RESET, REGISTER_TIMEOUT);
rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
return 0;
}
static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
{
u32 reg = 0;
if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev)))
return -EIO;
rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
/*
* Total room for RX frames in kilobytes, PBF might still exceed
* this limit so reduce the number to prevent errors.
*/
rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
((rt2x00dev->rx->limit * DATA_FRAME_SIZE)
/ 1024) - 3);
rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
return rt2800_enable_radio(rt2x00dev);
}
static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
{
rt2800_disable_radio(rt2x00dev);
}
static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
if (state == STATE_AWAKE)
rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 2);
else
rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2);
return 0;
}
static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
int retval = 0;
switch (state) {
case STATE_RADIO_ON:
/*
* Before the radio can be enabled, the device first has
* to be woken up. After that it needs a bit of time
* to be fully awake and then the radio can be enabled.
*/
rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
msleep(1);
retval = rt2800usb_enable_radio(rt2x00dev);
break;
case STATE_RADIO_OFF:
/*
* After the radio has been disabled, the device should
* be put to sleep for powersaving.
*/
rt2800usb_disable_radio(rt2x00dev);
rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_OFF:
/* No support, but no error either */
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
case STATE_STANDBY:
case STATE_AWAKE:
retval = rt2800usb_set_state(rt2x00dev, state);
break;
default:
retval = -ENOTSUPP;
break;
}
if (unlikely(retval))
rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
state, retval);
return retval;
}
static unsigned int rt2800usb_get_dma_done(struct data_queue *queue)
{
struct queue_entry *entry;
entry = rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE);
return entry->entry_idx;
}
/*
* TX descriptor initialization
*/
static __le32 *rt2800usb_get_txwi(struct queue_entry *entry)
{
if (entry->queue->qid == QID_BEACON)
return (__le32 *) (entry->skb->data);
else
return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
}
static void rt2800usb_write_tx_desc(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
__le32 *txi = (__le32 *) entry->skb->data;
u32 word;
/*
* Initialize TXINFO descriptor
*/
word = rt2x00_desc_read(txi, 0);
/*
* The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is
* TXWI + 802.11 header + L2 pad + payload + pad,
* so need to decrease size of TXINFO.
*/
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
roundup(entry->skb->len, 4) - TXINFO_DESC_SIZE);
rt2x00_set_field32(&word, TXINFO_W0_WIV,
!test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
rt2x00_desc_write(txi, 0, word);
/*
* Register descriptor details in skb frame descriptor.
*/
skbdesc->flags |= SKBDESC_DESC_IN_SKB;
skbdesc->desc = txi;
skbdesc->desc_len = TXINFO_DESC_SIZE + entry->queue->winfo_size;
}
/*
* TX data initialization
*/
static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
{
/*
* pad(1~3 bytes) is needed after each 802.11 payload.
* USB end pad(4 bytes) is needed at each USB bulk out packet end.
* TX frame format is :
* | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad |
* |<------------- tx_pkt_len ------------->|
*/
return roundup(entry->skb->len, 4) + 4;
}
/*
* TX control handlers
*/
static void rt2800usb_work_txdone(struct work_struct *work)
{
struct rt2x00_dev *rt2x00dev =
container_of(work, struct rt2x00_dev, txdone_work);
while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
rt2800_txstatus_timeout(rt2x00dev)) {
rt2800_txdone(rt2x00dev, UINT_MAX);
rt2800_txdone_nostatus(rt2x00dev);
/*
* The hw may delay sending the packet after DMA complete
* if the medium is busy, thus the TX_STA_FIFO entry is
* also delayed -> use a timer to retrieve it.
*/
if (rt2800_txstatus_pending(rt2x00dev))
rt2800usb_async_read_tx_status(rt2x00dev);
}
}
/*
* RX control handlers
*/
static void rt2800usb_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
__le32 *rxi = (__le32 *)entry->skb->data;
__le32 *rxd;
u32 word;
int rx_pkt_len;
/*
* Copy descriptor to the skbdesc->desc buffer, making it safe from
* moving of frame data in rt2x00usb.
*/
memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
/*
* RX frame format is :
* | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
* |<------------ rx_pkt_len -------------->|
*/
word = rt2x00_desc_read(rxi, 0);
rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN);
/*
* Remove the RXINFO structure from the sbk.
*/
skb_pull(entry->skb, RXINFO_DESC_SIZE);
/*
* Check for rx_pkt_len validity. Return if invalid, leaving
* rxdesc->size zeroed out by the upper level.
*/
if (unlikely(rx_pkt_len == 0 ||
rx_pkt_len > entry->queue->data_size)) {
rt2x00_err(entry->queue->rt2x00dev,
"Bad frame size %d, forcing to 0\n", rx_pkt_len);
return;
}
rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
/*
* It is now safe to read the descriptor on all architectures.
*/
word = rt2x00_desc_read(rxd, 0);
if (rt2x00_get_field32(word, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W0_CIPHER_ERROR);
if (rt2x00_get_field32(word, RXD_W0_DECRYPTED)) {
/*
* Hardware has stripped IV/EIV data from 802.11 frame during
* decryption. Unfortunately the descriptor doesn't contain
* any fields with the EIV/IV data either, so they can't
* be restored by rt2x00lib.
*/
rxdesc->flags |= RX_FLAG_IV_STRIPPED;
/*
* The hardware has already checked the Michael Mic and has
* stripped it from the frame. Signal this to mac80211.
*/
rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) {
rxdesc->flags |= RX_FLAG_DECRYPTED;
} else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) {
/*
* In order to check the Michael Mic, the packet must have
* been decrypted. Mac80211 doesnt check the MMIC failure
* flag to initiate MMIC countermeasures if the decoded flag
* has not been set.
*/
rxdesc->flags |= RX_FLAG_DECRYPTED;
rxdesc->flags |= RX_FLAG_MMIC_ERROR;
}
}
if (rt2x00_get_field32(word, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
if (rt2x00_get_field32(word, RXD_W0_L2PAD))
rxdesc->dev_flags |= RXDONE_L2PAD;
/*
* Remove RXD descriptor from end of buffer.
*/
skb_trim(entry->skb, rx_pkt_len);
/*
* Process the RXWI structure.
*/
rt2800_process_rxwi(entry, rxdesc);
}
/*
* Device probe functions.
*/
static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev)
{
int retval;
retval = rt2800usb_autorun_detect(rt2x00dev);
if (retval < 0)
return retval;
if (retval)
return 1;
return rt2800_efuse_detect(rt2x00dev);
}
static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
int retval;
retval = rt2800usb_efuse_detect(rt2x00dev);
if (retval < 0)
return retval;
if (retval)
retval = rt2800_read_eeprom_efuse(rt2x00dev);
else
retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
EEPROM_SIZE);
return retval;
}
static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
retval = rt2800_probe_hw(rt2x00dev);
if (retval)
return retval;
/*
* Set txstatus timer function.
*/
rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout;
/*
* Overwrite TX done handler
*/
INIT_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
return 0;
}
static const struct ieee80211_ops rt2800usb_mac80211_ops = {
.tx = rt2x00mac_tx,
.start = rt2x00mac_start,
.stop = rt2x00mac_stop,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
.set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
.sw_scan_start = rt2x00mac_sw_scan_start,
.sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
.get_key_seq = rt2800_get_key_seq,
.set_rts_threshold = rt2800_set_rts_threshold,
.sta_add = rt2800_sta_add,
.sta_remove = rt2800_sta_remove,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2800_conf_tx,
.get_tsf = rt2800_get_tsf,
.rfkill_poll = rt2x00mac_rfkill_poll,
.ampdu_action = rt2800_ampdu_action,
.flush = rt2x00mac_flush,
.get_survey = rt2800_get_survey,
.get_ringparam = rt2x00mac_get_ringparam,
.tx_frames_pending = rt2x00mac_tx_frames_pending,
.reconfig_complete = rt2x00mac_reconfig_complete,
};
static const struct rt2800_ops rt2800usb_rt2800_ops = {
.register_read = rt2x00usb_register_read,
.register_read_lock = rt2x00usb_register_read_lock,
.register_write = rt2x00usb_register_write,
.register_write_lock = rt2x00usb_register_write_lock,
.register_multiread = rt2x00usb_register_multiread,
.register_multiwrite = rt2x00usb_register_multiwrite,
.regbusy_read = rt2x00usb_regbusy_read,
.read_eeprom = rt2800usb_read_eeprom,
.hwcrypt_disabled = rt2800usb_hwcrypt_disabled,
.drv_write_firmware = rt2800usb_write_firmware,
.drv_init_registers = rt2800usb_init_registers,
.drv_get_txwi = rt2800usb_get_txwi,
.drv_get_dma_done = rt2800usb_get_dma_done,
};
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.probe_hw = rt2800usb_probe_hw,
.get_firmware_name = rt2800usb_get_firmware_name,
.check_firmware = rt2800_check_firmware,
.load_firmware = rt2800_load_firmware,
.initialize = rt2x00usb_initialize,
.uninitialize = rt2x00usb_uninitialize,
.clear_entry = rt2x00usb_clear_entry,
.set_device_state = rt2800usb_set_device_state,
.rfkill_poll = rt2800_rfkill_poll,
.link_stats = rt2800_link_stats,
.reset_tuner = rt2800_reset_tuner,
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
.vco_calibration = rt2800_vco_calibration,
.watchdog = rt2800_watchdog,
.start_queue = rt2800usb_start_queue,
.kick_queue = rt2x00usb_kick_queue,
.stop_queue = rt2800usb_stop_queue,
.flush_queue = rt2x00usb_flush_queue,
.tx_dma_done = rt2800usb_tx_dma_done,
.write_tx_desc = rt2800usb_write_tx_desc,
.write_tx_data = rt2800_write_tx_data,
.write_beacon = rt2800_write_beacon,
.clear_beacon = rt2800_clear_beacon,
.get_tx_data_len = rt2800usb_get_tx_data_len,
.fill_rxdone = rt2800usb_fill_rxdone,
.config_shared_key = rt2800_config_shared_key,
.config_pairwise_key = rt2800_config_pairwise_key,
.config_filter = rt2800_config_filter,
.config_intf = rt2800_config_intf,
.config_erp = rt2800_config_erp,
.config_ant = rt2800_config_ant,
.config = rt2800_config,
.pre_reset_hw = rt2800_pre_reset_hw,
};
static void rt2800usb_queue_init(struct data_queue *queue)
{
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
unsigned short txwi_size, rxwi_size;
rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size);
switch (queue->qid) {
case QID_RX:
queue->limit = 128;
queue->data_size = AGGREGATION_SIZE;
queue->desc_size = RXINFO_DESC_SIZE;
queue->winfo_size = rxwi_size;
queue->priv_size = sizeof(struct queue_entry_priv_usb);
break;
case QID_AC_VO:
case QID_AC_VI:
case QID_AC_BE:
case QID_AC_BK:
queue->limit = 16;
queue->data_size = AGGREGATION_SIZE;
queue->desc_size = TXINFO_DESC_SIZE;
queue->winfo_size = txwi_size;
queue->priv_size = sizeof(struct queue_entry_priv_usb);
break;
case QID_BEACON:
queue->limit = 8;
queue->data_size = MGMT_FRAME_SIZE;
queue->desc_size = TXINFO_DESC_SIZE;
queue->winfo_size = txwi_size;
queue->priv_size = sizeof(struct queue_entry_priv_usb);
break;
case QID_ATIM:
default:
BUG();
break;
}
}
static const struct rt2x00_ops rt2800usb_ops = {
.name = KBUILD_MODNAME,
.drv_data_size = sizeof(struct rt2800_drv_data),
.max_ap_intf = 8,
.eeprom_size = EEPROM_SIZE,
.rf_size = RF_SIZE,
.tx_queues = NUM_TX_QUEUES,
.queue_init = rt2800usb_queue_init,
.lib = &rt2800usb_rt2x00_ops,
.drv = &rt2800usb_rt2800_ops,
.hw = &rt2800usb_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
.debugfs = &rt2800_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
/*
* rt2800usb module information.
*/
static const struct usb_device_id rt2800usb_device_table[] = {
/* Abocom */
{ USB_DEVICE(0x07b8, 0x2870) },
{ USB_DEVICE(0x07b8, 0x2770) },
{ USB_DEVICE(0x07b8, 0x3070) },
{ USB_DEVICE(0x07b8, 0x3071) },
{ USB_DEVICE(0x07b8, 0x3072) },
{ USB_DEVICE(0x1482, 0x3c09) },
/* AirTies */
{ USB_DEVICE(0x1eda, 0x2012) },
{ USB_DEVICE(0x1eda, 0x2210) },
{ USB_DEVICE(0x1eda, 0x2310) },
/* Allwin */
{ USB_DEVICE(0x8516, 0x2070) },
{ USB_DEVICE(0x8516, 0x2770) },
{ USB_DEVICE(0x8516, 0x2870) },
{ USB_DEVICE(0x8516, 0x3070) },
{ USB_DEVICE(0x8516, 0x3071) },
{ USB_DEVICE(0x8516, 0x3072) },
/* Alpha Networks */
{ USB_DEVICE(0x14b2, 0x3c06) },
{ USB_DEVICE(0x14b2, 0x3c07) },
{ USB_DEVICE(0x14b2, 0x3c09) },
{ USB_DEVICE(0x14b2, 0x3c12) },
{ USB_DEVICE(0x14b2, 0x3c23) },
{ USB_DEVICE(0x14b2, 0x3c25) },
{ USB_DEVICE(0x14b2, 0x3c27) },
{ USB_DEVICE(0x14b2, 0x3c28) },
{ USB_DEVICE(0x14b2, 0x3c2c) },
/* Amit */
{ USB_DEVICE(0x15c5, 0x0008) },
/* Askey */
{ USB_DEVICE(0x1690, 0x0740) },
/* ASUS */
{ USB_DEVICE(0x0b05, 0x1731) },
{ USB_DEVICE(0x0b05, 0x1732) },
{ USB_DEVICE(0x0b05, 0x1742) },
{ USB_DEVICE(0x0b05, 0x1784) },
{ USB_DEVICE(0x1761, 0x0b05) },
/* AzureWave */
{ USB_DEVICE(0x13d3, 0x3247) },
{ USB_DEVICE(0x13d3, 0x3273) },
{ USB_DEVICE(0x13d3, 0x3305) },
{ USB_DEVICE(0x13d3, 0x3307) },
{ USB_DEVICE(0x13d3, 0x3321) },
/* Belkin */
{ USB_DEVICE(0x050d, 0x8053) },
{ USB_DEVICE(0x050d, 0x805c) },
{ USB_DEVICE(0x050d, 0x815c) },
{ USB_DEVICE(0x050d, 0x825a) },
{ USB_DEVICE(0x050d, 0x825b) },
{ USB_DEVICE(0x050d, 0x935a) },
{ USB_DEVICE(0x050d, 0x935b) },
/* Buffalo */
{ USB_DEVICE(0x0411, 0x00e8) },
{ USB_DEVICE(0x0411, 0x0158) },
{ USB_DEVICE(0x0411, 0x015d) },
{ USB_DEVICE(0x0411, 0x016f) },
{ USB_DEVICE(0x0411, 0x01a2) },
{ USB_DEVICE(0x0411, 0x01ee) },
{ USB_DEVICE(0x0411, 0x01a8) },
{ USB_DEVICE(0x0411, 0x01fd) },
/* Corega */
{ USB_DEVICE(0x07aa, 0x002f) },
{ USB_DEVICE(0x07aa, 0x003c) },
{ USB_DEVICE(0x07aa, 0x003f) },
{ USB_DEVICE(0x18c5, 0x0012) },
/* D-Link */
{ USB_DEVICE(0x07d1, 0x3c09) },
{ USB_DEVICE(0x07d1, 0x3c0a) },
{ USB_DEVICE(0x07d1, 0x3c0d) },
{ USB_DEVICE(0x07d1, 0x3c0e) },
{ USB_DEVICE(0x07d1, 0x3c0f) },
{ USB_DEVICE(0x07d1, 0x3c11) },
{ USB_DEVICE(0x07d1, 0x3c13) },
{ USB_DEVICE(0x07d1, 0x3c15) },
{ USB_DEVICE(0x07d1, 0x3c16) },
{ USB_DEVICE(0x07d1, 0x3c17) },
{ USB_DEVICE(0x2001, 0x3317) },
{ USB_DEVICE(0x2001, 0x3c1b) },
{ USB_DEVICE(0x2001, 0x3c25) },
/* Draytek */
{ USB_DEVICE(0x07fa, 0x7712) },
/* DVICO */
{ USB_DEVICE(0x0fe9, 0xb307) },
/* Edimax */
{ USB_DEVICE(0x7392, 0x4085) },
{ USB_DEVICE(0x7392, 0x7711) },
{ USB_DEVICE(0x7392, 0x7717) },
{ USB_DEVICE(0x7392, 0x7718) },
{ USB_DEVICE(0x7392, 0x7722) },
/* Encore */
{ USB_DEVICE(0x203d, 0x1480) },
{ USB_DEVICE(0x203d, 0x14a9) },
/* EnGenius */
{ USB_DEVICE(0x1740, 0x9701) },
{ USB_DEVICE(0x1740, 0x9702) },
{ USB_DEVICE(0x1740, 0x9703) },
{ USB_DEVICE(0x1740, 0x9705) },
{ USB_DEVICE(0x1740, 0x9706) },
{ USB_DEVICE(0x1740, 0x9707) },
{ USB_DEVICE(0x1740, 0x9708) },
{ USB_DEVICE(0x1740, 0x9709) },
/* Gemtek */
{ USB_DEVICE(0x15a9, 0x0012) },
/* Gigabyte */
{ USB_DEVICE(0x1044, 0x800b) },
{ USB_DEVICE(0x1044, 0x800d) },
/* Hawking */
{ USB_DEVICE(0x0e66, 0x0001) },
{ USB_DEVICE(0x0e66, 0x0003) },
{ USB_DEVICE(0x0e66, 0x0009) },
{ USB_DEVICE(0x0e66, 0x000b) },
{ USB_DEVICE(0x0e66, 0x0013) },
{ USB_DEVICE(0x0e66, 0x0017) },
{ USB_DEVICE(0x0e66, 0x0018) },
/* I-O DATA */
{ USB_DEVICE(0x04bb, 0x0945) },
{ USB_DEVICE(0x04bb, 0x0947) },
{ USB_DEVICE(0x04bb, 0x0948) },
/* Linksys */
{ USB_DEVICE(0x13b1, 0x0031) },
{ USB_DEVICE(0x1737, 0x0070) },
{ USB_DEVICE(0x1737, 0x0071) },
{ USB_DEVICE(0x1737, 0x0077) },
{ USB_DEVICE(0x1737, 0x0078) },
/* Logitec */
{ USB_DEVICE(0x0789, 0x0162) },
{ USB_DEVICE(0x0789, 0x0163) },
{ USB_DEVICE(0x0789, 0x0164) },
{ USB_DEVICE(0x0789, 0x0166) },
/* Motorola */
{ USB_DEVICE(0x100d, 0x9031) },
/* MSI */
{ USB_DEVICE(0x0db0, 0x3820) },
{ USB_DEVICE(0x0db0, 0x3821) },
{ USB_DEVICE(0x0db0, 0x3822) },
{ USB_DEVICE(0x0db0, 0x3870) },
{ USB_DEVICE(0x0db0, 0x3871) },
{ USB_DEVICE(0x0db0, 0x6899) },
{ USB_DEVICE(0x0db0, 0x821a) },
{ USB_DEVICE(0x0db0, 0x822a) },
{ USB_DEVICE(0x0db0, 0x822b) },
{ USB_DEVICE(0x0db0, 0x822c) },
{ USB_DEVICE(0x0db0, 0x870a) },
{ USB_DEVICE(0x0db0, 0x871a) },
{ USB_DEVICE(0x0db0, 0x871b) },
{ USB_DEVICE(0x0db0, 0x871c) },
{ USB_DEVICE(0x0db0, 0x899a) },
/* Ovislink */
{ USB_DEVICE(0x1b75, 0x3070) },
{ USB_DEVICE(0x1b75, 0x3071) },
{ USB_DEVICE(0x1b75, 0x3072) },
{ USB_DEVICE(0x1b75, 0xa200) },
/* Para */
{ USB_DEVICE(0x20b8, 0x8888) },
/* Pegatron */
{ USB_DEVICE(0x1d4d, 0x0002) },
{ USB_DEVICE(0x1d4d, 0x000c) },
{ USB_DEVICE(0x1d4d, 0x000e) },
{ USB_DEVICE(0x1d4d, 0x0011) },
/* Philips */
{ USB_DEVICE(0x0471, 0x200f) },
/* Planex */
{ USB_DEVICE(0x2019, 0x5201) },
{ USB_DEVICE(0x2019, 0xab25) },
{ USB_DEVICE(0x2019, 0xed06) },
/* Quanta */
{ USB_DEVICE(0x1a32, 0x0304) },
/* Ralink */
{ USB_DEVICE(0x148f, 0x2070) },
{ USB_DEVICE(0x148f, 0x2770) },
{ USB_DEVICE(0x148f, 0x2870) },
{ USB_DEVICE(0x148f, 0x3070) },
{ USB_DEVICE(0x148f, 0x3071) },
{ USB_DEVICE(0x148f, 0x3072) },
/* Samsung */
{ USB_DEVICE(0x04e8, 0x2018) },
/* Siemens */
{ USB_DEVICE(0x129b, 0x1828) },
/* Sitecom */
{ USB_DEVICE(0x0df6, 0x0017) },
{ USB_DEVICE(0x0df6, 0x002b) },
{ USB_DEVICE(0x0df6, 0x002c) },
{ USB_DEVICE(0x0df6, 0x002d) },
{ USB_DEVICE(0x0df6, 0x0039) },
{ USB_DEVICE(0x0df6, 0x003b) },
{ USB_DEVICE(0x0df6, 0x003d) },
{ USB_DEVICE(0x0df6, 0x003e) },
{ USB_DEVICE(0x0df6, 0x003f) },
{ USB_DEVICE(0x0df6, 0x0040) },
{ USB_DEVICE(0x0df6, 0x0042) },
{ USB_DEVICE(0x0df6, 0x0047) },
{ USB_DEVICE(0x0df6, 0x0048) },
{ USB_DEVICE(0x0df6, 0x0051) },
{ USB_DEVICE(0x0df6, 0x005f) },
{ USB_DEVICE(0x0df6, 0x0060) },
/* SMC */
{ USB_DEVICE(0x083a, 0x6618) },
{ USB_DEVICE(0x083a, 0x7511) },
{ USB_DEVICE(0x083a, 0x7512) },
{ USB_DEVICE(0x083a, 0x7522) },
{ USB_DEVICE(0x083a, 0x8522) },
{ USB_DEVICE(0x083a, 0xa618) },
{ USB_DEVICE(0x083a, 0xa701) },
{ USB_DEVICE(0x083a, 0xa702) },
{ USB_DEVICE(0x083a, 0xa703) },
{ USB_DEVICE(0x083a, 0xb522) },
/* Sparklan */
{ USB_DEVICE(0x15a9, 0x0006) },
/* Sweex */
{ USB_DEVICE(0x177f, 0x0153) },
{ USB_DEVICE(0x177f, 0x0164) },
{ USB_DEVICE(0x177f, 0x0302) },
{ USB_DEVICE(0x177f, 0x0313) },
{ USB_DEVICE(0x177f, 0x0323) },
{ USB_DEVICE(0x177f, 0x0324) },
{ USB_DEVICE(0x177f, 0x1163) },
/* U-Media */
{ USB_DEVICE(0x157e, 0x300e) },
{ USB_DEVICE(0x157e, 0x3013) },
/* ZCOM */
{ USB_DEVICE(0x0cde, 0x0022) },
{ USB_DEVICE(0x0cde, 0x0025) },
/* Zinwell */
{ USB_DEVICE(0x5a57, 0x0280) },
{ USB_DEVICE(0x5a57, 0x0282) },
{ USB_DEVICE(0x5a57, 0x0283) },
{ USB_DEVICE(0x5a57, 0x5257) },
/* Zyxel */
{ USB_DEVICE(0x0586, 0x3416) },
{ USB_DEVICE(0x0586, 0x3418) },
{ USB_DEVICE(0x0586, 0x341a) },
{ USB_DEVICE(0x0586, 0x341e) },
{ USB_DEVICE(0x0586, 0x343e) },
#ifdef CONFIG_RT2800USB_RT33XX
/* Belkin */
{ USB_DEVICE(0x050d, 0x945b) },
/* D-Link */
{ USB_DEVICE(0x2001, 0x3c17) },
/* Panasonic */
{ USB_DEVICE(0x083a, 0xb511) },
/* Accton/Arcadyan/Epson */
{ USB_DEVICE(0x083a, 0xb512) },
/* Philips */
{ USB_DEVICE(0x0471, 0x20dd) },
/* Ralink */
{ USB_DEVICE(0x148f, 0x3370) },
{ USB_DEVICE(0x148f, 0x8070) },
/* Sitecom */
{ USB_DEVICE(0x0df6, 0x0050) },
/* Sweex */
{ USB_DEVICE(0x177f, 0x0163) },
{ USB_DEVICE(0x177f, 0x0165) },
#endif
#ifdef CONFIG_RT2800USB_RT35XX
/* Allwin */
{ USB_DEVICE(0x8516, 0x3572) },
/* Askey */
{ USB_DEVICE(0x1690, 0x0744) },
{ USB_DEVICE(0x1690, 0x0761) },
{ USB_DEVICE(0x1690, 0x0764) },
/* ASUS */
{ USB_DEVICE(0x0b05, 0x179d) },
/* Cisco */
{ USB_DEVICE(0x167b, 0x4001) },
/* EnGenius */
{ USB_DEVICE(0x1740, 0x9801) },
/* I-O DATA */
{ USB_DEVICE(0x04bb, 0x0944) },
/* Linksys */
{ USB_DEVICE(0x13b1, 0x002f) },
{ USB_DEVICE(0x1737, 0x0079) },
/* Logitec */
{ USB_DEVICE(0x0789, 0x0170) },
/* Ralink */
{ USB_DEVICE(0x148f, 0x3572) },
/* Sitecom */
{ USB_DEVICE(0x0df6, 0x0041) },
{ USB_DEVICE(0x0df6, 0x0062) },
{ USB_DEVICE(0x0df6, 0x0065) },
{ USB_DEVICE(0x0df6, 0x0066) },
{ USB_DEVICE(0x0df6, 0x0068) },
/* Toshiba */
{ USB_DEVICE(0x0930, 0x0a07) },
/* Zinwell */
{ USB_DEVICE(0x5a57, 0x0284) },
#endif
#ifdef CONFIG_RT2800USB_RT3573
/* AirLive */
{ USB_DEVICE(0x1b75, 0x7733) },
/* ASUS */
{ USB_DEVICE(0x0b05, 0x17bc) },
{ USB_DEVICE(0x0b05, 0x17ad) },
/* Belkin */
{ USB_DEVICE(0x050d, 0x1103) },
/* Cameo */
{ USB_DEVICE(0x148f, 0xf301) },
/* D-Link */
{ USB_DEVICE(0x2001, 0x3c1f) },
/* Edimax */
{ USB_DEVICE(0x7392, 0x7733) },
/* Hawking */
{ USB_DEVICE(0x0e66, 0x0020) },
{ USB_DEVICE(0x0e66, 0x0021) },
/* I-O DATA */
{ USB_DEVICE(0x04bb, 0x094e) },
/* Linksys */
{ USB_DEVICE(0x13b1, 0x003b) },
/* Logitec */
{ USB_DEVICE(0x0789, 0x016b) },
/* NETGEAR */
{ USB_DEVICE(0x0846, 0x9012) },
{ USB_DEVICE(0x0846, 0x9013) },
{ USB_DEVICE(0x0846, 0x9019) },
/* Planex */
{ USB_DEVICE(0x2019, 0xed14) },
{ USB_DEVICE(0x2019, 0xed19) },
/* Ralink */
{ USB_DEVICE(0x148f, 0x3573) },
/* Sitecom */
{ USB_DEVICE(0x0df6, 0x0067) },
{ USB_DEVICE(0x0df6, 0x006a) },
{ USB_DEVICE(0x0df6, 0x006e) },
/* ZyXEL */
{ USB_DEVICE(0x0586, 0x3421) },
#endif
#ifdef CONFIG_RT2800USB_RT53XX
/* Arcadyan */
{ USB_DEVICE(0x043e, 0x7a12) },
/* ASUS */
{ USB_DEVICE(0x0b05, 0x17e8) },
/* Azurewave */
{ USB_DEVICE(0x13d3, 0x3329) },
{ USB_DEVICE(0x13d3, 0x3365) },
/* D-Link */
{ USB_DEVICE(0x2001, 0x3c15) },
{ USB_DEVICE(0x2001, 0x3c19) },
{ USB_DEVICE(0x2001, 0x3c1c) },
{ USB_DEVICE(0x2001, 0x3c1d) },
{ USB_DEVICE(0x2001, 0x3c1e) },
{ USB_DEVICE(0x2001, 0x3c20) },
{ USB_DEVICE(0x2001, 0x3c22) },
{ USB_DEVICE(0x2001, 0x3c23) },
/* LG innotek */
{ USB_DEVICE(0x043e, 0x7a22) },
{ USB_DEVICE(0x043e, 0x7a42) },
/* Panasonic */
{ USB_DEVICE(0x04da, 0x1801) },
{ USB_DEVICE(0x04da, 0x1800) },
{ USB_DEVICE(0x04da, 0x23f6) },
/* Philips */
{ USB_DEVICE(0x0471, 0x2104) },
{ USB_DEVICE(0x0471, 0x2126) },
{ USB_DEVICE(0x0471, 0x2180) },
{ USB_DEVICE(0x0471, 0x2181) },
{ USB_DEVICE(0x0471, 0x2182) },
/* Ralink */
{ USB_DEVICE(0x148f, 0x5370) },
{ USB_DEVICE(0x148f, 0x5372) },
#endif
#ifdef CONFIG_RT2800USB_RT55XX
/* Arcadyan */
{ USB_DEVICE(0x043e, 0x7a32) },
/* AVM GmbH */
{ USB_DEVICE(0x057c, 0x8501) },
/* Buffalo */
{ USB_DEVICE(0x0411, 0x0241) },
{ USB_DEVICE(0x0411, 0x0253) },
/* D-Link */
{ USB_DEVICE(0x2001, 0x3c1a) },
{ USB_DEVICE(0x2001, 0x3c21) },
/* Proware */
{ USB_DEVICE(0x043e, 0x7a13) },
/* Ralink */
{ USB_DEVICE(0x148f, 0x5572) },
/* TRENDnet */
{ USB_DEVICE(0x20f4, 0x724a) },
#endif
#ifdef CONFIG_RT2800USB_UNKNOWN
/*
* Unclear what kind of devices these are (they aren't supported by the
* vendor linux driver).
*/
/* Abocom */
{ USB_DEVICE(0x07b8, 0x3073) },
{ USB_DEVICE(0x07b8, 0x3074) },
/* Alpha Networks */
{ USB_DEVICE(0x14b2, 0x3c08) },
{ USB_DEVICE(0x14b2, 0x3c11) },
/* Amigo */
{ USB_DEVICE(0x0e0b, 0x9031) },
{ USB_DEVICE(0x0e0b, 0x9041) },
/* ASUS */
{ USB_DEVICE(0x0b05, 0x166a) },
{ USB_DEVICE(0x0b05, 0x1760) },
{ USB_DEVICE(0x0b05, 0x1761) },
{ USB_DEVICE(0x0b05, 0x1790) },
{ USB_DEVICE(0x0b05, 0x17a7) },
/* AzureWave */
{ USB_DEVICE(0x13d3, 0x3262) },
{ USB_DEVICE(0x13d3, 0x3284) },
{ USB_DEVICE(0x13d3, 0x3322) },
{ USB_DEVICE(0x13d3, 0x3340) },
{ USB_DEVICE(0x13d3, 0x3399) },
{ USB_DEVICE(0x13d3, 0x3400) },
{ USB_DEVICE(0x13d3, 0x3401) },
/* Belkin */
{ USB_DEVICE(0x050d, 0x1003) },
/* Buffalo */
{ USB_DEVICE(0x0411, 0x012e) },
{ USB_DEVICE(0x0411, 0x0148) },
{ USB_DEVICE(0x0411, 0x0150) },
/* Corega */
{ USB_DEVICE(0x07aa, 0x0041) },
{ USB_DEVICE(0x07aa, 0x0042) },
{ USB_DEVICE(0x18c5, 0x0008) },
/* D-Link */
{ USB_DEVICE(0x07d1, 0x3c0b) },
/* Encore */
{ USB_DEVICE(0x203d, 0x14a1) },
/* EnGenius */
{ USB_DEVICE(0x1740, 0x0600) },
{ USB_DEVICE(0x1740, 0x0602) },
/* Gemtek */
{ USB_DEVICE(0x15a9, 0x0010) },
/* Gigabyte */
{ USB_DEVICE(0x1044, 0x800c) },
/* Hercules */
{ USB_DEVICE(0x06f8, 0xe036) },
/* Huawei */
{ USB_DEVICE(0x148f, 0xf101) },
/* I-O DATA */
{ USB_DEVICE(0x04bb, 0x094b) },
/* LevelOne */
{ USB_DEVICE(0x1740, 0x0605) },
{ USB_DEVICE(0x1740, 0x0615) },
/* Logitec */
{ USB_DEVICE(0x0789, 0x0168) },
{ USB_DEVICE(0x0789, 0x0169) },
/* Motorola */
{ USB_DEVICE(0x100d, 0x9032) },
/* Pegatron */
{ USB_DEVICE(0x05a6, 0x0101) },
{ USB_DEVICE(0x1d4d, 0x0010) },
/* Planex */
{ USB_DEVICE(0x2019, 0xab24) },
{ USB_DEVICE(0x2019, 0xab29) },
/* Qcom */
{ USB_DEVICE(0x18e8, 0x6259) },
/* RadioShack */
{ USB_DEVICE(0x08b9, 0x1197) },
/* Sitecom */
{ USB_DEVICE(0x0df6, 0x003c) },
{ USB_DEVICE(0x0df6, 0x004a) },
{ USB_DEVICE(0x0df6, 0x004d) },
{ USB_DEVICE(0x0df6, 0x0053) },
{ USB_DEVICE(0x0df6, 0x0069) },
{ USB_DEVICE(0x0df6, 0x006f) },
{ USB_DEVICE(0x0df6, 0x0078) },
/* SMC */
{ USB_DEVICE(0x083a, 0xa512) },
{ USB_DEVICE(0x083a, 0xc522) },
{ USB_DEVICE(0x083a, 0xd522) },
{ USB_DEVICE(0x083a, 0xf511) },
/* Sweex */
{ USB_DEVICE(0x177f, 0x0254) },
/* TP-LINK */
{ USB_DEVICE(0xf201, 0x5370) },
#endif
{ 0, }
};
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
MODULE_FIRMWARE(FIRMWARE_RT2870);
MODULE_LICENSE("GPL");
static int rt2800usb_probe(struct usb_interface *usb_intf,
const struct usb_device_id *id)
{
return rt2x00usb_probe(usb_intf, &rt2800usb_ops);
}
static struct usb_driver rt2800usb_driver = {
.name = KBUILD_MODNAME,
.id_table = rt2800usb_device_table,
.probe = rt2800usb_probe,
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
.reset_resume = rt2x00usb_resume,
.disable_hub_initiated_lpm = 1,
};
module_usb_driver(rt2800usb_driver);