| /* |
| * Secure Element driver for STMicroelectronics NFC NCI chip |
| * |
| * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/nfc.h> |
| #include <linux/delay.h> |
| #include <net/nfc/nci.h> |
| #include <net/nfc/nci_core.h> |
| |
| #include "st-nci.h" |
| #include "st-nci_se.h" |
| |
| struct st_nci_pipe_info { |
| u8 pipe_state; |
| u8 src_host_id; |
| u8 src_gate_id; |
| u8 dst_host_id; |
| u8 dst_gate_id; |
| } __packed; |
| |
| /* Hosts */ |
| #define ST_NCI_HOST_CONTROLLER_ID 0x00 |
| #define ST_NCI_TERMINAL_HOST_ID 0x01 |
| #define ST_NCI_UICC_HOST_ID 0x02 |
| #define ST_NCI_ESE_HOST_ID 0xc0 |
| |
| /* Gates */ |
| #define ST_NCI_DEVICE_MGNT_GATE 0x01 |
| #define ST_NCI_APDU_READER_GATE 0xf0 |
| #define ST_NCI_CONNECTIVITY_GATE 0x41 |
| |
| /* Pipes */ |
| #define ST_NCI_DEVICE_MGNT_PIPE 0x02 |
| |
| /* Connectivity pipe only */ |
| #define ST_NCI_SE_COUNT_PIPE_UICC 0x01 |
| /* Connectivity + APDU Reader pipe */ |
| #define ST_NCI_SE_COUNT_PIPE_EMBEDDED 0x02 |
| |
| #define ST_NCI_SE_TO_HOT_PLUG 1000 /* msecs */ |
| #define ST_NCI_SE_TO_PIPES 2000 |
| |
| #define ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(x) (x->data[0] & 0x80) |
| |
| #define NCI_HCI_APDU_PARAM_ATR 0x01 |
| #define NCI_HCI_ADMIN_PARAM_SESSION_IDENTITY 0x01 |
| #define NCI_HCI_ADMIN_PARAM_WHITELIST 0x03 |
| #define NCI_HCI_ADMIN_PARAM_HOST_LIST 0x04 |
| |
| #define ST_NCI_EVT_SE_HARD_RESET 0x20 |
| #define ST_NCI_EVT_TRANSMIT_DATA 0x10 |
| #define ST_NCI_EVT_WTX_REQUEST 0x11 |
| #define ST_NCI_EVT_SE_SOFT_RESET 0x11 |
| #define ST_NCI_EVT_SE_END_OF_APDU_TRANSFER 0x21 |
| #define ST_NCI_EVT_HOT_PLUG 0x03 |
| |
| #define ST_NCI_SE_MODE_OFF 0x00 |
| #define ST_NCI_SE_MODE_ON 0x01 |
| |
| #define ST_NCI_EVT_CONNECTIVITY 0x10 |
| #define ST_NCI_EVT_TRANSACTION 0x12 |
| |
| #define ST_NCI_DM_GETINFO 0x13 |
| #define ST_NCI_DM_GETINFO_PIPE_LIST 0x02 |
| #define ST_NCI_DM_GETINFO_PIPE_INFO 0x01 |
| #define ST_NCI_DM_PIPE_CREATED 0x02 |
| #define ST_NCI_DM_PIPE_OPEN 0x04 |
| #define ST_NCI_DM_RF_ACTIVE 0x80 |
| #define ST_NCI_DM_DISCONNECT 0x30 |
| |
| #define ST_NCI_DM_IS_PIPE_OPEN(p) \ |
| ((p & 0x0f) == (ST_NCI_DM_PIPE_CREATED | ST_NCI_DM_PIPE_OPEN)) |
| |
| #define ST_NCI_ATR_DEFAULT_BWI 0x04 |
| |
| /* |
| * WT = 2^BWI/10[s], convert into msecs and add a secure |
| * room by increasing by 2 this timeout |
| */ |
| #define ST_NCI_BWI_TO_TIMEOUT(x) ((1 << x) * 200) |
| #define ST_NCI_ATR_GET_Y_FROM_TD(x) (x >> 4) |
| |
| /* If TA is present bit 0 is set */ |
| #define ST_NCI_ATR_TA_PRESENT(x) (x & 0x01) |
| /* If TB is present bit 1 is set */ |
| #define ST_NCI_ATR_TB_PRESENT(x) (x & 0x02) |
| |
| #define ST_NCI_NUM_DEVICES 256 |
| |
| static DECLARE_BITMAP(dev_mask, ST_NCI_NUM_DEVICES); |
| |
| /* Here are the mandatory pipe for st_nci */ |
| static struct nci_hci_gate st_nci_gates[] = { |
| {NCI_HCI_ADMIN_GATE, NCI_HCI_ADMIN_PIPE, |
| ST_NCI_HOST_CONTROLLER_ID}, |
| {NCI_HCI_LINK_MGMT_GATE, NCI_HCI_LINK_MGMT_PIPE, |
| ST_NCI_HOST_CONTROLLER_ID}, |
| {ST_NCI_DEVICE_MGNT_GATE, ST_NCI_DEVICE_MGNT_PIPE, |
| ST_NCI_HOST_CONTROLLER_ID}, |
| |
| /* Secure element pipes are created by secure element host */ |
| {ST_NCI_CONNECTIVITY_GATE, NCI_HCI_DO_NOT_OPEN_PIPE, |
| ST_NCI_HOST_CONTROLLER_ID}, |
| {ST_NCI_APDU_READER_GATE, NCI_HCI_DO_NOT_OPEN_PIPE, |
| ST_NCI_HOST_CONTROLLER_ID}, |
| }; |
| |
| static u8 st_nci_se_get_bwi(struct nci_dev *ndev) |
| { |
| int i; |
| u8 td; |
| struct st_nci_info *info = nci_get_drvdata(ndev); |
| |
| /* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */ |
| for (i = 1; i < ST_NCI_ESE_MAX_LENGTH; i++) { |
| td = ST_NCI_ATR_GET_Y_FROM_TD(info->se_info.atr[i]); |
| if (ST_NCI_ATR_TA_PRESENT(td)) |
| i++; |
| if (ST_NCI_ATR_TB_PRESENT(td)) { |
| i++; |
| return info->se_info.atr[i] >> 4; |
| } |
| } |
| return ST_NCI_ATR_DEFAULT_BWI; |
| } |
| |
| static void st_nci_se_get_atr(struct nci_dev *ndev) |
| { |
| struct st_nci_info *info = nci_get_drvdata(ndev); |
| int r; |
| struct sk_buff *skb; |
| |
| r = nci_hci_get_param(ndev, ST_NCI_APDU_READER_GATE, |
| NCI_HCI_APDU_PARAM_ATR, &skb); |
| if (r < 0) |
| return; |
| |
| if (skb->len <= ST_NCI_ESE_MAX_LENGTH) { |
| memcpy(info->se_info.atr, skb->data, skb->len); |
| |
| info->se_info.wt_timeout = |
| ST_NCI_BWI_TO_TIMEOUT(st_nci_se_get_bwi(ndev)); |
| } |
| kfree_skb(skb); |
| } |
| |
| int st_nci_hci_load_session(struct nci_dev *ndev) |
| { |
| int i, j, r; |
| struct sk_buff *skb_pipe_list, *skb_pipe_info; |
| struct st_nci_pipe_info *dm_pipe_info; |
| u8 pipe_list[] = { ST_NCI_DM_GETINFO_PIPE_LIST, |
| ST_NCI_TERMINAL_HOST_ID}; |
| u8 pipe_info[] = { ST_NCI_DM_GETINFO_PIPE_INFO, |
| ST_NCI_TERMINAL_HOST_ID, 0}; |
| |
| /* On ST_NCI device pipes number are dynamics |
| * If pipes are already created, hci_dev_up will fail. |
| * Doing a clear all pipe is a bad idea because: |
| * - It does useless EEPROM cycling |
| * - It might cause issue for secure elements support |
| * (such as removing connectivity or APDU reader pipe) |
| * A better approach on ST_NCI is to: |
| * - get a pipe list for each host. |
| * (eg: ST_NCI_HOST_CONTROLLER_ID for now). |
| * (TODO Later on UICC HOST and eSE HOST) |
| * - get pipe information |
| * - match retrieved pipe list in st_nci_gates |
| * ST_NCI_DEVICE_MGNT_GATE is a proprietary gate |
| * with ST_NCI_DEVICE_MGNT_PIPE. |
| * Pipe can be closed and need to be open. |
| */ |
| r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID, |
| ST_NCI_DEVICE_MGNT_GATE, |
| ST_NCI_DEVICE_MGNT_PIPE); |
| if (r < 0) |
| return r; |
| |
| /* Get pipe list */ |
| r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, |
| ST_NCI_DM_GETINFO, pipe_list, sizeof(pipe_list), |
| &skb_pipe_list); |
| if (r < 0) |
| return r; |
| |
| /* Complete the existing gate_pipe table */ |
| for (i = 0; i < skb_pipe_list->len; i++) { |
| pipe_info[2] = skb_pipe_list->data[i]; |
| r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, |
| ST_NCI_DM_GETINFO, pipe_info, |
| sizeof(pipe_info), &skb_pipe_info); |
| |
| if (r) |
| continue; |
| |
| /* |
| * Match pipe ID and gate ID |
| * Output format from ST21NFC_DM_GETINFO is: |
| * - pipe state (1byte) |
| * - source hid (1byte) |
| * - source gid (1byte) |
| * - destination hid (1byte) |
| * - destination gid (1byte) |
| */ |
| dm_pipe_info = (struct st_nci_pipe_info *)skb_pipe_info->data; |
| if (dm_pipe_info->dst_gate_id == ST_NCI_APDU_READER_GATE && |
| dm_pipe_info->src_host_id != ST_NCI_ESE_HOST_ID) { |
| pr_err("Unexpected apdu_reader pipe on host %x\n", |
| dm_pipe_info->src_host_id); |
| kfree_skb(skb_pipe_info); |
| continue; |
| } |
| |
| for (j = 0; (j < ARRAY_SIZE(st_nci_gates)) && |
| (st_nci_gates[j].gate != dm_pipe_info->dst_gate_id); j++) |
| ; |
| |
| if (j < ARRAY_SIZE(st_nci_gates) && |
| st_nci_gates[j].gate == dm_pipe_info->dst_gate_id && |
| ST_NCI_DM_IS_PIPE_OPEN(dm_pipe_info->pipe_state)) { |
| st_nci_gates[j].pipe = pipe_info[2]; |
| |
| ndev->hci_dev->gate2pipe[st_nci_gates[j].gate] = |
| st_nci_gates[j].pipe; |
| ndev->hci_dev->pipes[st_nci_gates[j].pipe].gate = |
| st_nci_gates[j].gate; |
| ndev->hci_dev->pipes[st_nci_gates[j].pipe].host = |
| dm_pipe_info->src_host_id; |
| } |
| kfree_skb(skb_pipe_info); |
| } |
| |
| memcpy(ndev->hci_dev->init_data.gates, st_nci_gates, |
| sizeof(st_nci_gates)); |
| |
| kfree_skb(skb_pipe_list); |
| return r; |
| } |
| EXPORT_SYMBOL_GPL(st_nci_hci_load_session); |
| |
| static void st_nci_hci_admin_event_received(struct nci_dev *ndev, |
| u8 event, struct sk_buff *skb) |
| { |
| struct st_nci_info *info = nci_get_drvdata(ndev); |
| |
| switch (event) { |
| case ST_NCI_EVT_HOT_PLUG: |
| if (info->se_info.se_active) { |
| if (!ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(skb)) { |
| del_timer_sync(&info->se_info.se_active_timer); |
| info->se_info.se_active = false; |
| complete(&info->se_info.req_completion); |
| } else { |
| mod_timer(&info->se_info.se_active_timer, |
| jiffies + |
| msecs_to_jiffies(ST_NCI_SE_TO_PIPES)); |
| } |
| } |
| break; |
| } |
| } |
| |
| static int st_nci_hci_apdu_reader_event_received(struct nci_dev *ndev, |
| u8 event, |
| struct sk_buff *skb) |
| { |
| int r = 0; |
| struct st_nci_info *info = nci_get_drvdata(ndev); |
| |
| pr_debug("apdu reader gate event: %x\n", event); |
| |
| switch (event) { |
| case ST_NCI_EVT_TRANSMIT_DATA: |
| del_timer_sync(&info->se_info.bwi_timer); |
| info->se_info.bwi_active = false; |
| info->se_info.cb(info->se_info.cb_context, |
| skb->data, skb->len, 0); |
| break; |
| case ST_NCI_EVT_WTX_REQUEST: |
| mod_timer(&info->se_info.bwi_timer, jiffies + |
| msecs_to_jiffies(info->se_info.wt_timeout)); |
| break; |
| } |
| |
| kfree_skb(skb); |
| return r; |
| } |
| |
| /* |
| * Returns: |
| * <= 0: driver handled the event, skb consumed |
| * 1: driver does not handle the event, please do standard processing |
| */ |
| static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev, |
| u8 host, u8 event, |
| struct sk_buff *skb) |
| { |
| int r = 0; |
| struct device *dev = &ndev->nfc_dev->dev; |
| struct nfc_evt_transaction *transaction; |
| |
| pr_debug("connectivity gate event: %x\n", event); |
| |
| switch (event) { |
| case ST_NCI_EVT_CONNECTIVITY: |
| |
| break; |
| case ST_NCI_EVT_TRANSACTION: |
| /* According to specification etsi 102 622 |
| * 11.2.2.4 EVT_TRANSACTION Table 52 |
| * Description Tag Length |
| * AID 81 5 to 16 |
| * PARAMETERS 82 0 to 255 |
| */ |
| if (skb->len < NFC_MIN_AID_LENGTH + 2 && |
| skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG) |
| return -EPROTO; |
| |
| transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev, |
| skb->len - 2, GFP_KERNEL); |
| |
| transaction->aid_len = skb->data[1]; |
| memcpy(transaction->aid, &skb->data[2], transaction->aid_len); |
| |
| /* Check next byte is PARAMETERS tag (82) */ |
| if (skb->data[transaction->aid_len + 2] != |
| NFC_EVT_TRANSACTION_PARAMS_TAG) |
| return -EPROTO; |
| |
| transaction->params_len = skb->data[transaction->aid_len + 3]; |
| memcpy(transaction->params, skb->data + |
| transaction->aid_len + 4, transaction->params_len); |
| |
| r = nfc_se_transaction(ndev->nfc_dev, host, transaction); |
| break; |
| default: |
| return 1; |
| } |
| kfree_skb(skb); |
| return r; |
| } |
| |
| void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe, |
| u8 event, struct sk_buff *skb) |
| { |
| u8 gate = ndev->hci_dev->pipes[pipe].gate; |
| u8 host = ndev->hci_dev->pipes[pipe].host; |
| |
| switch (gate) { |
| case NCI_HCI_ADMIN_GATE: |
| st_nci_hci_admin_event_received(ndev, event, skb); |
| break; |
| case ST_NCI_APDU_READER_GATE: |
| st_nci_hci_apdu_reader_event_received(ndev, event, skb); |
| break; |
| case ST_NCI_CONNECTIVITY_GATE: |
| st_nci_hci_connectivity_event_received(ndev, host, event, |
| skb); |
| break; |
| } |
| } |
| EXPORT_SYMBOL_GPL(st_nci_hci_event_received); |
| |
| |
| void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd, |
| struct sk_buff *skb) |
| { |
| struct st_nci_info *info = nci_get_drvdata(ndev); |
| u8 gate = ndev->hci_dev->pipes[pipe].gate; |
| |
| pr_debug("cmd: %x\n", cmd); |
| |
| switch (cmd) { |
| case NCI_HCI_ANY_OPEN_PIPE: |
| if (gate != ST_NCI_APDU_READER_GATE && |
| ndev->hci_dev->pipes[pipe].host != ST_NCI_UICC_HOST_ID) |
| ndev->hci_dev->count_pipes++; |
| |
| if (ndev->hci_dev->count_pipes == |
| ndev->hci_dev->expected_pipes) { |
| del_timer_sync(&info->se_info.se_active_timer); |
| info->se_info.se_active = false; |
| ndev->hci_dev->count_pipes = 0; |
| complete(&info->se_info.req_completion); |
| } |
| break; |
| } |
| } |
| EXPORT_SYMBOL_GPL(st_nci_hci_cmd_received); |
| |
| /* |
| * Remarks: On some early st_nci firmware, nci_nfcee_mode_set(0) |
| * is rejected |
| */ |
| static int st_nci_control_se(struct nci_dev *ndev, u8 se_idx, |
| u8 state) |
| { |
| struct st_nci_info *info = nci_get_drvdata(ndev); |
| int r; |
| struct sk_buff *sk_host_list; |
| u8 host_id; |
| |
| switch (se_idx) { |
| case ST_NCI_UICC_HOST_ID: |
| ndev->hci_dev->count_pipes = 0; |
| ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_UICC; |
| break; |
| case ST_NCI_ESE_HOST_ID: |
| ndev->hci_dev->count_pipes = 0; |
| ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_EMBEDDED; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* |
| * Wait for an EVT_HOT_PLUG in order to |
| * retrieve a relevant host list. |
| */ |
| reinit_completion(&info->se_info.req_completion); |
| r = nci_nfcee_mode_set(ndev, se_idx, NCI_NFCEE_ENABLE); |
| if (r != NCI_STATUS_OK) |
| return r; |
| |
| mod_timer(&info->se_info.se_active_timer, jiffies + |
| msecs_to_jiffies(ST_NCI_SE_TO_HOT_PLUG)); |
| info->se_info.se_active = true; |
| |
| /* Ignore return value and check in any case the host_list */ |
| wait_for_completion_interruptible(&info->se_info.req_completion); |
| |
| /* There might be some "collision" after receiving a HOT_PLUG event |
| * This may cause the CLF to not answer to the next hci command. |
| * There is no possible synchronization to prevent this. |
| * Adding a small delay is the only way to solve the issue. |
| */ |
| usleep_range(3000, 5000); |
| |
| r = nci_hci_get_param(ndev, NCI_HCI_ADMIN_GATE, |
| NCI_HCI_ADMIN_PARAM_HOST_LIST, &sk_host_list); |
| if (r != NCI_HCI_ANY_OK) |
| return r; |
| |
| host_id = sk_host_list->data[sk_host_list->len - 1]; |
| kfree_skb(sk_host_list); |
| if (state == ST_NCI_SE_MODE_ON && host_id == se_idx) |
| return se_idx; |
| else if (state == ST_NCI_SE_MODE_OFF && host_id != se_idx) |
| return se_idx; |
| |
| return -1; |
| } |
| |
| int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx) |
| { |
| int r; |
| |
| pr_debug("st_nci_disable_se\n"); |
| |
| if (se_idx == NFC_SE_EMBEDDED) { |
| r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE, |
| ST_NCI_EVT_SE_END_OF_APDU_TRANSFER, NULL, 0); |
| if (r < 0) |
| return r; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(st_nci_disable_se); |
| |
| int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx) |
| { |
| int r; |
| |
| pr_debug("st_nci_enable_se\n"); |
| |
| if (se_idx == ST_NCI_HCI_HOST_ID_ESE) { |
| r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE, |
| ST_NCI_EVT_SE_SOFT_RESET, NULL, 0); |
| if (r < 0) |
| return r; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(st_nci_enable_se); |
| |
| static int st_nci_hci_network_init(struct nci_dev *ndev) |
| { |
| struct core_conn_create_dest_spec_params *dest_params; |
| struct dest_spec_params spec_params; |
| struct nci_conn_info *conn_info; |
| int r, dev_num; |
| |
| dest_params = |
| kzalloc(sizeof(struct core_conn_create_dest_spec_params) + |
| sizeof(struct dest_spec_params), GFP_KERNEL); |
| if (dest_params == NULL) { |
| r = -ENOMEM; |
| goto exit; |
| } |
| |
| dest_params->type = NCI_DESTINATION_SPECIFIC_PARAM_NFCEE_TYPE; |
| dest_params->length = sizeof(struct dest_spec_params); |
| spec_params.id = ndev->hci_dev->nfcee_id; |
| spec_params.protocol = NCI_NFCEE_INTERFACE_HCI_ACCESS; |
| memcpy(dest_params->value, &spec_params, |
| sizeof(struct dest_spec_params)); |
| r = nci_core_conn_create(ndev, NCI_DESTINATION_NFCEE, 1, |
| sizeof(struct core_conn_create_dest_spec_params) + |
| sizeof(struct dest_spec_params), |
| dest_params); |
| if (r != NCI_STATUS_OK) |
| goto free_dest_params; |
| |
| conn_info = ndev->hci_dev->conn_info; |
| if (!conn_info) |
| goto free_dest_params; |
| |
| memcpy(ndev->hci_dev->init_data.gates, st_nci_gates, |
| sizeof(st_nci_gates)); |
| |
| /* |
| * Session id must include the driver name + i2c bus addr |
| * persistent info to discriminate 2 identical chips |
| */ |
| dev_num = find_first_zero_bit(dev_mask, ST_NCI_NUM_DEVICES); |
| if (dev_num >= ST_NCI_NUM_DEVICES) { |
| r = -ENODEV; |
| goto free_dest_params; |
| } |
| |
| scnprintf(ndev->hci_dev->init_data.session_id, |
| sizeof(ndev->hci_dev->init_data.session_id), |
| "%s%2x", "ST21BH", dev_num); |
| |
| r = nci_hci_dev_session_init(ndev); |
| if (r != NCI_HCI_ANY_OK) |
| goto free_dest_params; |
| |
| r = nci_nfcee_mode_set(ndev, ndev->hci_dev->conn_info->id, |
| NCI_NFCEE_ENABLE); |
| if (r != NCI_STATUS_OK) |
| goto free_dest_params; |
| |
| free_dest_params: |
| kfree(dest_params); |
| |
| exit: |
| return r; |
| } |
| |
| int st_nci_discover_se(struct nci_dev *ndev) |
| { |
| u8 param[2]; |
| int r; |
| int se_count = 0; |
| |
| pr_debug("st_nci_discover_se\n"); |
| |
| r = st_nci_hci_network_init(ndev); |
| if (r != 0) |
| return r; |
| |
| param[0] = ST_NCI_UICC_HOST_ID; |
| param[1] = ST_NCI_HCI_HOST_ID_ESE; |
| r = nci_hci_set_param(ndev, NCI_HCI_ADMIN_GATE, |
| NCI_HCI_ADMIN_PARAM_WHITELIST, |
| param, sizeof(param)); |
| if (r != NCI_HCI_ANY_OK) |
| return r; |
| |
| r = st_nci_control_se(ndev, ST_NCI_UICC_HOST_ID, |
| ST_NCI_SE_MODE_ON); |
| if (r == ST_NCI_UICC_HOST_ID) { |
| nfc_add_se(ndev->nfc_dev, ST_NCI_UICC_HOST_ID, NFC_SE_UICC); |
| se_count++; |
| } |
| |
| /* Try to enable eSE in order to check availability */ |
| r = st_nci_control_se(ndev, ST_NCI_HCI_HOST_ID_ESE, |
| ST_NCI_SE_MODE_ON); |
| if (r == ST_NCI_HCI_HOST_ID_ESE) { |
| nfc_add_se(ndev->nfc_dev, ST_NCI_HCI_HOST_ID_ESE, |
| NFC_SE_EMBEDDED); |
| se_count++; |
| st_nci_se_get_atr(ndev); |
| } |
| |
| return !se_count; |
| } |
| EXPORT_SYMBOL_GPL(st_nci_discover_se); |
| |
| int st_nci_se_io(struct nci_dev *ndev, u32 se_idx, |
| u8 *apdu, size_t apdu_length, |
| se_io_cb_t cb, void *cb_context) |
| { |
| struct st_nci_info *info = nci_get_drvdata(ndev); |
| |
| pr_debug("\n"); |
| |
| switch (se_idx) { |
| case ST_NCI_HCI_HOST_ID_ESE: |
| info->se_info.cb = cb; |
| info->se_info.cb_context = cb_context; |
| mod_timer(&info->se_info.bwi_timer, jiffies + |
| msecs_to_jiffies(info->se_info.wt_timeout)); |
| info->se_info.bwi_active = true; |
| return nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE, |
| ST_NCI_EVT_TRANSMIT_DATA, apdu, |
| apdu_length); |
| default: |
| return -ENODEV; |
| } |
| } |
| EXPORT_SYMBOL(st_nci_se_io); |
| |
| static void st_nci_se_wt_timeout(unsigned long data) |
| { |
| /* |
| * No answer from the secure element |
| * within the defined timeout. |
| * Let's send a reset request as recovery procedure. |
| * According to the situation, we first try to send a software reset |
| * to the secure element. If the next command is still not |
| * answering in time, we send to the CLF a secure element hardware |
| * reset request. |
| */ |
| /* hardware reset managed through VCC_UICC_OUT power supply */ |
| u8 param = 0x01; |
| struct st_nci_info *info = (struct st_nci_info *) data; |
| |
| pr_debug("\n"); |
| |
| info->se_info.bwi_active = false; |
| |
| if (!info->se_info.xch_error) { |
| info->se_info.xch_error = true; |
| nci_hci_send_event(info->ndlc->ndev, ST_NCI_APDU_READER_GATE, |
| ST_NCI_EVT_SE_SOFT_RESET, NULL, 0); |
| } else { |
| info->se_info.xch_error = false; |
| nci_hci_send_event(info->ndlc->ndev, ST_NCI_DEVICE_MGNT_GATE, |
| ST_NCI_EVT_SE_HARD_RESET, ¶m, 1); |
| } |
| info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME); |
| } |
| |
| static void st_nci_se_activation_timeout(unsigned long data) |
| { |
| struct st_nci_info *info = (struct st_nci_info *) data; |
| |
| pr_debug("\n"); |
| |
| info->se_info.se_active = false; |
| |
| complete(&info->se_info.req_completion); |
| } |
| |
| int st_nci_se_init(struct nci_dev *ndev) |
| { |
| struct st_nci_info *info = nci_get_drvdata(ndev); |
| |
| init_completion(&info->se_info.req_completion); |
| /* initialize timers */ |
| init_timer(&info->se_info.bwi_timer); |
| info->se_info.bwi_timer.data = (unsigned long)info; |
| info->se_info.bwi_timer.function = st_nci_se_wt_timeout; |
| info->se_info.bwi_active = false; |
| |
| init_timer(&info->se_info.se_active_timer); |
| info->se_info.se_active_timer.data = (unsigned long)info; |
| info->se_info.se_active_timer.function = |
| st_nci_se_activation_timeout; |
| info->se_info.se_active = false; |
| |
| info->se_info.xch_error = false; |
| |
| info->se_info.wt_timeout = |
| ST_NCI_BWI_TO_TIMEOUT(ST_NCI_ATR_DEFAULT_BWI); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(st_nci_se_init); |
| |
| void st_nci_se_deinit(struct nci_dev *ndev) |
| { |
| struct st_nci_info *info = nci_get_drvdata(ndev); |
| |
| if (info->se_info.bwi_active) |
| del_timer_sync(&info->se_info.bwi_timer); |
| if (info->se_info.se_active) |
| del_timer_sync(&info->se_info.se_active_timer); |
| |
| info->se_info.se_active = false; |
| info->se_info.bwi_active = false; |
| } |
| EXPORT_SYMBOL(st_nci_se_deinit); |
| |