| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/poll.h> |
| #include <linux/i2c.h> |
| #include <linux/types.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-common.h> |
| #include <linux/init.h> |
| #include <linux/crc32.h> |
| |
| |
| #define MPEG_VIDEO_TARGET_BITRATE_MAX 27000 |
| #define MPEG_VIDEO_MAX_BITRATE_MAX 27000 |
| #define MPEG_TOTAL_TARGET_BITRATE_MAX 27000 |
| #define MPEG_PID_MAX ((1 << 14) - 1) |
| |
| /* Addresses to scan */ |
| static unsigned short normal_i2c[] = {0x20, I2C_CLIENT_END}; |
| I2C_CLIENT_INSMOD; |
| |
| MODULE_DESCRIPTION("device driver for saa6752hs MPEG2 encoder"); |
| MODULE_AUTHOR("Andrew de Quincey"); |
| MODULE_LICENSE("GPL"); |
| |
| static struct i2c_driver driver; |
| static struct i2c_client client_template; |
| |
| enum saa6752hs_videoformat { |
| SAA6752HS_VF_D1 = 0, /* standard D1 video format: 720x576 */ |
| SAA6752HS_VF_2_3_D1 = 1,/* 2/3D1 video format: 480x576 */ |
| SAA6752HS_VF_1_2_D1 = 2,/* 1/2D1 video format: 352x576 */ |
| SAA6752HS_VF_SIF = 3, /* SIF video format: 352x288 */ |
| SAA6752HS_VF_UNKNOWN, |
| }; |
| |
| static const struct v4l2_format v4l2_format_table[] = |
| { |
| [SAA6752HS_VF_D1] = |
| { .fmt = { .pix = { .width = 720, .height = 576 }}}, |
| [SAA6752HS_VF_2_3_D1] = |
| { .fmt = { .pix = { .width = 480, .height = 576 }}}, |
| [SAA6752HS_VF_1_2_D1] = |
| { .fmt = { .pix = { .width = 352, .height = 576 }}}, |
| [SAA6752HS_VF_SIF] = |
| { .fmt = { .pix = { .width = 352, .height = 288 }}}, |
| [SAA6752HS_VF_UNKNOWN] = |
| { .fmt = { .pix = { .width = 0, .height = 0}}}, |
| }; |
| |
| struct saa6752hs_state { |
| struct i2c_client client; |
| struct v4l2_mpeg_compression params; |
| enum saa6752hs_videoformat video_format; |
| v4l2_std_id standard; |
| }; |
| |
| enum saa6752hs_command { |
| SAA6752HS_COMMAND_RESET = 0, |
| SAA6752HS_COMMAND_STOP = 1, |
| SAA6752HS_COMMAND_START = 2, |
| SAA6752HS_COMMAND_PAUSE = 3, |
| SAA6752HS_COMMAND_RECONFIGURE = 4, |
| SAA6752HS_COMMAND_SLEEP = 5, |
| SAA6752HS_COMMAND_RECONFIGURE_FORCE = 6, |
| |
| SAA6752HS_COMMAND_MAX |
| }; |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static u8 PAT[] = { |
| 0xc2, /* i2c register */ |
| 0x00, /* table number for encoder */ |
| |
| 0x47, /* sync */ |
| 0x40, 0x00, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid(0) */ |
| 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */ |
| |
| 0x00, /* PSI pointer to start of table */ |
| |
| 0x00, /* tid(0) */ |
| 0xb0, 0x0d, /* section_syntax_indicator(1), section_length(13) */ |
| |
| 0x00, 0x01, /* transport_stream_id(1) */ |
| |
| 0xc1, /* version_number(0), current_next_indicator(1) */ |
| |
| 0x00, 0x00, /* section_number(0), last_section_number(0) */ |
| |
| 0x00, 0x01, /* program_number(1) */ |
| |
| 0xe0, 0x00, /* PMT PID */ |
| |
| 0x00, 0x00, 0x00, 0x00 /* CRC32 */ |
| }; |
| |
| static u8 PMT[] = { |
| 0xc2, /* i2c register */ |
| 0x01, /* table number for encoder */ |
| |
| 0x47, /* sync */ |
| 0x40, 0x00, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid */ |
| 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */ |
| |
| 0x00, /* PSI pointer to start of table */ |
| |
| 0x02, /* tid(2) */ |
| 0xb0, 0x17, /* section_syntax_indicator(1), section_length(23) */ |
| |
| 0x00, 0x01, /* program_number(1) */ |
| |
| 0xc1, /* version_number(0), current_next_indicator(1) */ |
| |
| 0x00, 0x00, /* section_number(0), last_section_number(0) */ |
| |
| 0xe0, 0x00, /* PCR_PID */ |
| |
| 0xf0, 0x00, /* program_info_length(0) */ |
| |
| 0x02, 0xe0, 0x00, 0xf0, 0x00, /* video stream type(2), pid */ |
| 0x04, 0xe0, 0x00, 0xf0, 0x00, /* audio stream type(4), pid */ |
| |
| 0x00, 0x00, 0x00, 0x00 /* CRC32 */ |
| }; |
| |
| static struct v4l2_mpeg_compression param_defaults = |
| { |
| .st_type = V4L2_MPEG_TS_2, |
| .st_bitrate = { |
| .mode = V4L2_BITRATE_CBR, |
| .target = 7000, |
| }, |
| |
| .ts_pid_pmt = 16, |
| .ts_pid_video = 260, |
| .ts_pid_audio = 256, |
| .ts_pid_pcr = 259, |
| |
| .vi_type = V4L2_MPEG_VI_2, |
| .vi_aspect_ratio = V4L2_MPEG_ASPECT_4_3, |
| .vi_bitrate = { |
| .mode = V4L2_BITRATE_VBR, |
| .target = 4000, |
| .max = 6000, |
| }, |
| |
| .au_type = V4L2_MPEG_AU_2_II, |
| .au_bitrate = { |
| .mode = V4L2_BITRATE_CBR, |
| .target = 256, |
| }, |
| |
| }; |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static int saa6752hs_chip_command(struct i2c_client* client, |
| enum saa6752hs_command command) |
| { |
| unsigned char buf[3]; |
| unsigned long timeout; |
| int status = 0; |
| |
| /* execute the command */ |
| switch(command) { |
| case SAA6752HS_COMMAND_RESET: |
| buf[0] = 0x00; |
| break; |
| |
| case SAA6752HS_COMMAND_STOP: |
| buf[0] = 0x03; |
| break; |
| |
| case SAA6752HS_COMMAND_START: |
| buf[0] = 0x02; |
| break; |
| |
| case SAA6752HS_COMMAND_PAUSE: |
| buf[0] = 0x04; |
| break; |
| |
| case SAA6752HS_COMMAND_RECONFIGURE: |
| buf[0] = 0x05; |
| break; |
| |
| case SAA6752HS_COMMAND_SLEEP: |
| buf[0] = 0x06; |
| break; |
| |
| case SAA6752HS_COMMAND_RECONFIGURE_FORCE: |
| buf[0] = 0x07; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| /* set it and wait for it to be so */ |
| i2c_master_send(client, buf, 1); |
| timeout = jiffies + HZ * 3; |
| for (;;) { |
| /* get the current status */ |
| buf[0] = 0x10; |
| i2c_master_send(client, buf, 1); |
| i2c_master_recv(client, buf, 1); |
| |
| if (!(buf[0] & 0x20)) |
| break; |
| if (time_after(jiffies,timeout)) { |
| status = -ETIMEDOUT; |
| break; |
| } |
| |
| msleep(10); |
| } |
| |
| /* delay a bit to let encoder settle */ |
| msleep(50); |
| |
| return status; |
| } |
| |
| |
| static int saa6752hs_set_bitrate(struct i2c_client* client, |
| struct v4l2_mpeg_compression* params) |
| { |
| u8 buf[3]; |
| |
| /* set the bitrate mode */ |
| buf[0] = 0x71; |
| buf[1] = (params->vi_bitrate.mode == V4L2_BITRATE_VBR) ? 0 : 1; |
| i2c_master_send(client, buf, 2); |
| |
| /* set the video bitrate */ |
| if (params->vi_bitrate.mode == V4L2_BITRATE_VBR) { |
| /* set the target bitrate */ |
| buf[0] = 0x80; |
| buf[1] = params->vi_bitrate.target >> 8; |
| buf[2] = params->vi_bitrate.target & 0xff; |
| i2c_master_send(client, buf, 3); |
| |
| /* set the max bitrate */ |
| buf[0] = 0x81; |
| buf[1] = params->vi_bitrate.max >> 8; |
| buf[2] = params->vi_bitrate.max & 0xff; |
| i2c_master_send(client, buf, 3); |
| } else { |
| /* set the target bitrate (no max bitrate for CBR) */ |
| buf[0] = 0x81; |
| buf[1] = params->vi_bitrate.target >> 8; |
| buf[2] = params->vi_bitrate.target & 0xff; |
| i2c_master_send(client, buf, 3); |
| } |
| |
| /* set the audio bitrate */ |
| buf[0] = 0x94; |
| buf[1] = (256 == params->au_bitrate.target) ? 0 : 1; |
| i2c_master_send(client, buf, 2); |
| |
| /* set the total bitrate */ |
| buf[0] = 0xb1; |
| buf[1] = params->st_bitrate.target >> 8; |
| buf[2] = params->st_bitrate.target & 0xff; |
| i2c_master_send(client, buf, 3); |
| |
| return 0; |
| } |
| |
| static void saa6752hs_set_subsampling(struct i2c_client* client, |
| struct v4l2_format* f) |
| { |
| struct saa6752hs_state *h = i2c_get_clientdata(client); |
| int dist_352, dist_480, dist_720; |
| |
| /* |
| FIXME: translate and round width/height into EMPRESS |
| subsample type: |
| |
| type | PAL | NTSC |
| --------------------------- |
| SIF | 352x288 | 352x240 |
| 1/2 D1 | 352x576 | 352x480 |
| 2/3 D1 | 480x576 | 480x480 |
| D1 | 720x576 | 720x480 |
| */ |
| |
| dist_352 = abs(f->fmt.pix.width - 352); |
| dist_480 = abs(f->fmt.pix.width - 480); |
| dist_720 = abs(f->fmt.pix.width - 720); |
| if (dist_720 < dist_480) { |
| f->fmt.pix.width = 720; |
| f->fmt.pix.height = 576; |
| h->video_format = SAA6752HS_VF_D1; |
| } |
| else if (dist_480 < dist_352) { |
| f->fmt.pix.width = 480; |
| f->fmt.pix.height = 576; |
| h->video_format = SAA6752HS_VF_2_3_D1; |
| } |
| else { |
| f->fmt.pix.width = 352; |
| if (abs(f->fmt.pix.height - 576) < |
| abs(f->fmt.pix.height - 288)) { |
| f->fmt.pix.height = 576; |
| h->video_format = SAA6752HS_VF_1_2_D1; |
| } |
| else { |
| f->fmt.pix.height = 288; |
| h->video_format = SAA6752HS_VF_SIF; |
| } |
| } |
| } |
| |
| |
| static void saa6752hs_set_params(struct i2c_client* client, |
| struct v4l2_mpeg_compression* params) |
| { |
| struct saa6752hs_state *h = i2c_get_clientdata(client); |
| |
| /* check PIDs */ |
| if (params->ts_pid_pmt <= MPEG_PID_MAX) |
| h->params.ts_pid_pmt = params->ts_pid_pmt; |
| if (params->ts_pid_pcr <= MPEG_PID_MAX) |
| h->params.ts_pid_pcr = params->ts_pid_pcr; |
| if (params->ts_pid_video <= MPEG_PID_MAX) |
| h->params.ts_pid_video = params->ts_pid_video; |
| if (params->ts_pid_audio <= MPEG_PID_MAX) |
| h->params.ts_pid_audio = params->ts_pid_audio; |
| |
| /* check bitrate parameters */ |
| if ((params->vi_bitrate.mode == V4L2_BITRATE_CBR) || |
| (params->vi_bitrate.mode == V4L2_BITRATE_VBR)) |
| h->params.vi_bitrate.mode = params->vi_bitrate.mode; |
| if (params->vi_bitrate.mode != V4L2_BITRATE_NONE) |
| h->params.st_bitrate.target = params->st_bitrate.target; |
| if (params->vi_bitrate.mode != V4L2_BITRATE_NONE) |
| h->params.vi_bitrate.target = params->vi_bitrate.target; |
| if (params->vi_bitrate.mode == V4L2_BITRATE_VBR) |
| h->params.vi_bitrate.max = params->vi_bitrate.max; |
| if (params->au_bitrate.mode != V4L2_BITRATE_NONE) |
| h->params.au_bitrate.target = params->au_bitrate.target; |
| |
| /* aspect ratio */ |
| if (params->vi_aspect_ratio == V4L2_MPEG_ASPECT_4_3 || |
| params->vi_aspect_ratio == V4L2_MPEG_ASPECT_16_9) |
| h->params.vi_aspect_ratio = params->vi_aspect_ratio; |
| |
| /* range checks */ |
| if (h->params.st_bitrate.target > MPEG_TOTAL_TARGET_BITRATE_MAX) |
| h->params.st_bitrate.target = MPEG_TOTAL_TARGET_BITRATE_MAX; |
| if (h->params.vi_bitrate.target > MPEG_VIDEO_TARGET_BITRATE_MAX) |
| h->params.vi_bitrate.target = MPEG_VIDEO_TARGET_BITRATE_MAX; |
| if (h->params.vi_bitrate.max > MPEG_VIDEO_MAX_BITRATE_MAX) |
| h->params.vi_bitrate.max = MPEG_VIDEO_MAX_BITRATE_MAX; |
| if (h->params.au_bitrate.target <= 256) |
| h->params.au_bitrate.target = 256; |
| else |
| h->params.au_bitrate.target = 384; |
| } |
| |
| static int saa6752hs_init(struct i2c_client* client) |
| { |
| unsigned char buf[9], buf2[4]; |
| struct saa6752hs_state *h; |
| u32 crc; |
| unsigned char localPAT[256]; |
| unsigned char localPMT[256]; |
| |
| h = i2c_get_clientdata(client); |
| |
| /* Set video format - must be done first as it resets other settings */ |
| buf[0] = 0x41; |
| buf[1] = h->video_format; |
| i2c_master_send(client, buf, 2); |
| |
| /* Set number of lines in input signal */ |
| buf[0] = 0x40; |
| buf[1] = 0x00; |
| if (h->standard & V4L2_STD_525_60) |
| buf[1] = 0x01; |
| i2c_master_send(client, buf, 2); |
| |
| /* set bitrate */ |
| saa6752hs_set_bitrate(client, &h->params); |
| |
| /* Set GOP structure {3, 13} */ |
| buf[0] = 0x72; |
| buf[1] = 0x03; |
| buf[2] = 0x0D; |
| i2c_master_send(client,buf,3); |
| |
| /* Set minimum Q-scale {4} */ |
| buf[0] = 0x82; |
| buf[1] = 0x04; |
| i2c_master_send(client,buf,2); |
| |
| /* Set maximum Q-scale {12} */ |
| buf[0] = 0x83; |
| buf[1] = 0x0C; |
| i2c_master_send(client,buf,2); |
| |
| /* Set Output Protocol */ |
| buf[0] = 0xD0; |
| buf[1] = 0x81; |
| i2c_master_send(client,buf,2); |
| |
| /* Set video output stream format {TS} */ |
| buf[0] = 0xB0; |
| buf[1] = 0x05; |
| i2c_master_send(client,buf,2); |
| |
| /* compute PAT */ |
| memcpy(localPAT, PAT, sizeof(PAT)); |
| localPAT[17] = 0xe0 | ((h->params.ts_pid_pmt >> 8) & 0x0f); |
| localPAT[18] = h->params.ts_pid_pmt & 0xff; |
| crc = crc32_be(~0, &localPAT[7], sizeof(PAT) - 7 - 4); |
| localPAT[sizeof(PAT) - 4] = (crc >> 24) & 0xFF; |
| localPAT[sizeof(PAT) - 3] = (crc >> 16) & 0xFF; |
| localPAT[sizeof(PAT) - 2] = (crc >> 8) & 0xFF; |
| localPAT[sizeof(PAT) - 1] = crc & 0xFF; |
| |
| /* compute PMT */ |
| memcpy(localPMT, PMT, sizeof(PMT)); |
| localPMT[3] = 0x40 | ((h->params.ts_pid_pmt >> 8) & 0x0f); |
| localPMT[4] = h->params.ts_pid_pmt & 0xff; |
| localPMT[15] = 0xE0 | ((h->params.ts_pid_pcr >> 8) & 0x0F); |
| localPMT[16] = h->params.ts_pid_pcr & 0xFF; |
| localPMT[20] = 0xE0 | ((h->params.ts_pid_video >> 8) & 0x0F); |
| localPMT[21] = h->params.ts_pid_video & 0xFF; |
| localPMT[25] = 0xE0 | ((h->params.ts_pid_audio >> 8) & 0x0F); |
| localPMT[26] = h->params.ts_pid_audio & 0xFF; |
| crc = crc32_be(~0, &localPMT[7], sizeof(PMT) - 7 - 4); |
| localPMT[sizeof(PMT) - 4] = (crc >> 24) & 0xFF; |
| localPMT[sizeof(PMT) - 3] = (crc >> 16) & 0xFF; |
| localPMT[sizeof(PMT) - 2] = (crc >> 8) & 0xFF; |
| localPMT[sizeof(PMT) - 1] = crc & 0xFF; |
| |
| /* Set Audio PID */ |
| buf[0] = 0xC1; |
| buf[1] = (h->params.ts_pid_audio >> 8) & 0xFF; |
| buf[2] = h->params.ts_pid_audio & 0xFF; |
| i2c_master_send(client,buf,3); |
| |
| /* Set Video PID */ |
| buf[0] = 0xC0; |
| buf[1] = (h->params.ts_pid_video >> 8) & 0xFF; |
| buf[2] = h->params.ts_pid_video & 0xFF; |
| i2c_master_send(client,buf,3); |
| |
| /* Set PCR PID */ |
| buf[0] = 0xC4; |
| buf[1] = (h->params.ts_pid_pcr >> 8) & 0xFF; |
| buf[2] = h->params.ts_pid_pcr & 0xFF; |
| i2c_master_send(client,buf,3); |
| |
| /* Send SI tables */ |
| i2c_master_send(client,localPAT,sizeof(PAT)); |
| i2c_master_send(client,localPMT,sizeof(PMT)); |
| |
| /* mute then unmute audio. This removes buzzing artefacts */ |
| buf[0] = 0xa4; |
| buf[1] = 1; |
| i2c_master_send(client, buf, 2); |
| buf[1] = 0; |
| i2c_master_send(client, buf, 2); |
| |
| /* start it going */ |
| saa6752hs_chip_command(client, SAA6752HS_COMMAND_START); |
| |
| /* readout current state */ |
| buf[0] = 0xE1; |
| buf[1] = 0xA7; |
| buf[2] = 0xFE; |
| buf[3] = 0x82; |
| buf[4] = 0xB0; |
| i2c_master_send(client, buf, 5); |
| i2c_master_recv(client, buf2, 4); |
| |
| /* change aspect ratio */ |
| buf[0] = 0xE0; |
| buf[1] = 0xA7; |
| buf[2] = 0xFE; |
| buf[3] = 0x82; |
| buf[4] = 0xB0; |
| buf[5] = buf2[0]; |
| switch(h->params.vi_aspect_ratio) { |
| case V4L2_MPEG_ASPECT_16_9: |
| buf[6] = buf2[1] | 0x40; |
| break; |
| case V4L2_MPEG_ASPECT_4_3: |
| default: |
| buf[6] = buf2[1] & 0xBF; |
| break; |
| break; |
| } |
| buf[7] = buf2[2]; |
| buf[8] = buf2[3]; |
| i2c_master_send(client, buf, 9); |
| |
| return 0; |
| } |
| |
| static int saa6752hs_attach(struct i2c_adapter *adap, int addr, int kind) |
| { |
| struct saa6752hs_state *h; |
| |
| |
| if (NULL == (h = kzalloc(sizeof(*h), GFP_KERNEL))) |
| return -ENOMEM; |
| h->client = client_template; |
| h->params = param_defaults; |
| h->client.adapter = adap; |
| h->client.addr = addr; |
| |
| /* Assume 625 input lines */ |
| h->standard = 0; |
| |
| i2c_set_clientdata(&h->client, h); |
| i2c_attach_client(&h->client); |
| |
| v4l_info(&h->client,"saa6752hs: chip found @ 0x%x\n", addr<<1); |
| |
| return 0; |
| } |
| |
| static int saa6752hs_probe(struct i2c_adapter *adap) |
| { |
| if (adap->class & I2C_CLASS_TV_ANALOG) |
| return i2c_probe(adap, &addr_data, saa6752hs_attach); |
| return 0; |
| } |
| |
| static int saa6752hs_detach(struct i2c_client *client) |
| { |
| struct saa6752hs_state *h; |
| |
| h = i2c_get_clientdata(client); |
| i2c_detach_client(client); |
| kfree(h); |
| return 0; |
| } |
| |
| static int |
| saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) |
| { |
| struct saa6752hs_state *h = i2c_get_clientdata(client); |
| struct v4l2_mpeg_compression *params = arg; |
| int err = 0; |
| |
| switch (cmd) { |
| case VIDIOC_S_MPEGCOMP: |
| if (NULL == params) { |
| /* apply settings and start encoder */ |
| saa6752hs_init(client); |
| break; |
| } |
| saa6752hs_set_params(client, params); |
| /* fall through */ |
| case VIDIOC_G_MPEGCOMP: |
| *params = h->params; |
| break; |
| case VIDIOC_G_FMT: |
| { |
| struct v4l2_format *f = arg; |
| |
| if (h->video_format == SAA6752HS_VF_UNKNOWN) |
| h->video_format = SAA6752HS_VF_D1; |
| f->fmt.pix.width = |
| v4l2_format_table[h->video_format].fmt.pix.width; |
| f->fmt.pix.height = |
| v4l2_format_table[h->video_format].fmt.pix.height; |
| break ; |
| } |
| case VIDIOC_S_FMT: |
| { |
| struct v4l2_format *f = arg; |
| |
| saa6752hs_set_subsampling(client, f); |
| break; |
| } |
| case VIDIOC_S_STD: |
| h->standard = *((v4l2_std_id *) arg); |
| break; |
| default: |
| /* nothing */ |
| break; |
| } |
| |
| return err; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static struct i2c_driver driver = { |
| .driver = { |
| .name = "saa6752hs", |
| }, |
| .id = I2C_DRIVERID_SAA6752HS, |
| .attach_adapter = saa6752hs_probe, |
| .detach_client = saa6752hs_detach, |
| .command = saa6752hs_command, |
| }; |
| |
| static struct i2c_client client_template = |
| { |
| .name = "saa6752hs", |
| .driver = &driver, |
| }; |
| |
| static int __init saa6752hs_init_module(void) |
| { |
| return i2c_add_driver(&driver); |
| } |
| |
| static void __exit saa6752hs_cleanup_module(void) |
| { |
| i2c_del_driver(&driver); |
| } |
| |
| module_init(saa6752hs_init_module); |
| module_exit(saa6752hs_cleanup_module); |
| |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |