| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Detect hard and soft lockups on a system |
| * |
| * started by Don Zickus, Copyright (C) 2010 Red Hat, Inc. |
| * |
| * Note: Most of this code is borrowed heavily from the original softlockup |
| * detector, so thanks to Ingo for the initial implementation. |
| * Some chunks also taken from the old x86-specific nmi watchdog code, thanks |
| * to those contributors as well. |
| */ |
| |
| #define pr_fmt(fmt) "watchdog: " fmt |
| |
| #include <linux/mm.h> |
| #include <linux/cpu.h> |
| #include <linux/nmi.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/sysctl.h> |
| #include <linux/tick.h> |
| #include <linux/sched/clock.h> |
| #include <linux/sched/debug.h> |
| #include <linux/sched/isolation.h> |
| #include <linux/stop_machine.h> |
| |
| #include <asm/irq_regs.h> |
| #include <linux/kvm_para.h> |
| |
| #include <trace/hooks/softlockup.h> |
| |
| static DEFINE_MUTEX(watchdog_mutex); |
| |
| #if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64) |
| # define WATCHDOG_HARDLOCKUP_DEFAULT 1 |
| #else |
| # define WATCHDOG_HARDLOCKUP_DEFAULT 0 |
| #endif |
| |
| unsigned long __read_mostly watchdog_enabled; |
| int __read_mostly watchdog_user_enabled = 1; |
| static int __read_mostly watchdog_hardlockup_user_enabled = WATCHDOG_HARDLOCKUP_DEFAULT; |
| static int __read_mostly watchdog_softlockup_user_enabled = 1; |
| int __read_mostly watchdog_thresh = 10; |
| static int __read_mostly watchdog_hardlockup_available; |
| |
| struct cpumask watchdog_cpumask __read_mostly; |
| unsigned long *watchdog_cpumask_bits = cpumask_bits(&watchdog_cpumask); |
| |
| #ifdef CONFIG_HARDLOCKUP_DETECTOR |
| |
| # ifdef CONFIG_SMP |
| int __read_mostly sysctl_hardlockup_all_cpu_backtrace; |
| # endif /* CONFIG_SMP */ |
| |
| /* |
| * Should we panic when a soft-lockup or hard-lockup occurs: |
| */ |
| unsigned int __read_mostly hardlockup_panic = |
| IS_ENABLED(CONFIG_BOOTPARAM_HARDLOCKUP_PANIC); |
| /* |
| * We may not want to enable hard lockup detection by default in all cases, |
| * for example when running the kernel as a guest on a hypervisor. In these |
| * cases this function can be called to disable hard lockup detection. This |
| * function should only be executed once by the boot processor before the |
| * kernel command line parameters are parsed, because otherwise it is not |
| * possible to override this in hardlockup_panic_setup(). |
| */ |
| void __init hardlockup_detector_disable(void) |
| { |
| watchdog_hardlockup_user_enabled = 0; |
| } |
| |
| static int __init hardlockup_panic_setup(char *str) |
| { |
| if (!strncmp(str, "panic", 5)) |
| hardlockup_panic = 1; |
| else if (!strncmp(str, "nopanic", 7)) |
| hardlockup_panic = 0; |
| else if (!strncmp(str, "0", 1)) |
| watchdog_hardlockup_user_enabled = 0; |
| else if (!strncmp(str, "1", 1)) |
| watchdog_hardlockup_user_enabled = 1; |
| return 1; |
| } |
| __setup("nmi_watchdog=", hardlockup_panic_setup); |
| |
| #endif /* CONFIG_HARDLOCKUP_DETECTOR */ |
| |
| #if defined(CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER) |
| |
| static DEFINE_PER_CPU(atomic_t, hrtimer_interrupts); |
| static DEFINE_PER_CPU(int, hrtimer_interrupts_saved); |
| static DEFINE_PER_CPU(bool, watchdog_hardlockup_warned); |
| static DEFINE_PER_CPU(bool, watchdog_hardlockup_touched); |
| static unsigned long watchdog_hardlockup_all_cpu_dumped; |
| |
| notrace void arch_touch_nmi_watchdog(void) |
| { |
| /* |
| * Using __raw here because some code paths have |
| * preemption enabled. If preemption is enabled |
| * then interrupts should be enabled too, in which |
| * case we shouldn't have to worry about the watchdog |
| * going off. |
| */ |
| raw_cpu_write(watchdog_hardlockup_touched, true); |
| } |
| EXPORT_SYMBOL(arch_touch_nmi_watchdog); |
| |
| void watchdog_hardlockup_touch_cpu(unsigned int cpu) |
| { |
| per_cpu(watchdog_hardlockup_touched, cpu) = true; |
| } |
| |
| static bool is_hardlockup(unsigned int cpu) |
| { |
| int hrint = atomic_read(&per_cpu(hrtimer_interrupts, cpu)); |
| |
| if (per_cpu(hrtimer_interrupts_saved, cpu) == hrint) |
| return true; |
| |
| /* |
| * NOTE: we don't need any fancy atomic_t or READ_ONCE/WRITE_ONCE |
| * for hrtimer_interrupts_saved. hrtimer_interrupts_saved is |
| * written/read by a single CPU. |
| */ |
| per_cpu(hrtimer_interrupts_saved, cpu) = hrint; |
| |
| return false; |
| } |
| |
| static void watchdog_hardlockup_kick(void) |
| { |
| int new_interrupts; |
| |
| new_interrupts = atomic_inc_return(this_cpu_ptr(&hrtimer_interrupts)); |
| watchdog_buddy_check_hardlockup(new_interrupts); |
| } |
| |
| void watchdog_hardlockup_check(unsigned int cpu, struct pt_regs *regs) |
| { |
| if (per_cpu(watchdog_hardlockup_touched, cpu)) { |
| per_cpu(watchdog_hardlockup_touched, cpu) = false; |
| return; |
| } |
| |
| /* |
| * Check for a hardlockup by making sure the CPU's timer |
| * interrupt is incrementing. The timer interrupt should have |
| * fired multiple times before we overflow'd. If it hasn't |
| * then this is a good indication the cpu is stuck |
| */ |
| if (is_hardlockup(cpu)) { |
| unsigned int this_cpu = smp_processor_id(); |
| |
| /* Only print hardlockups once. */ |
| if (per_cpu(watchdog_hardlockup_warned, cpu)) |
| return; |
| |
| pr_emerg("Watchdog detected hard LOCKUP on cpu %d\n", cpu); |
| print_modules(); |
| print_irqtrace_events(current); |
| if (cpu == this_cpu) { |
| if (regs) |
| show_regs(regs); |
| else |
| dump_stack(); |
| } else { |
| trigger_single_cpu_backtrace(cpu); |
| } |
| |
| /* |
| * Perform multi-CPU dump only once to avoid multiple |
| * hardlockups generating interleaving traces |
| */ |
| if (sysctl_hardlockup_all_cpu_backtrace && |
| !test_and_set_bit(0, &watchdog_hardlockup_all_cpu_dumped)) |
| trigger_allbutcpu_cpu_backtrace(cpu); |
| |
| if (hardlockup_panic) |
| nmi_panic(regs, "Hard LOCKUP"); |
| |
| per_cpu(watchdog_hardlockup_warned, cpu) = true; |
| } else { |
| per_cpu(watchdog_hardlockup_warned, cpu) = false; |
| } |
| } |
| |
| #else /* CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER */ |
| |
| static inline void watchdog_hardlockup_kick(void) { } |
| |
| #endif /* !CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER */ |
| |
| /* |
| * These functions can be overridden based on the configured hardlockdup detector. |
| * |
| * watchdog_hardlockup_enable/disable can be implemented to start and stop when |
| * softlockup watchdog start and stop. The detector must select the |
| * SOFTLOCKUP_DETECTOR Kconfig. |
| */ |
| void __weak watchdog_hardlockup_enable(unsigned int cpu) { } |
| |
| void __weak watchdog_hardlockup_disable(unsigned int cpu) { } |
| |
| /* |
| * Watchdog-detector specific API. |
| * |
| * Return 0 when hardlockup watchdog is available, negative value otherwise. |
| * Note that the negative value means that a delayed probe might |
| * succeed later. |
| */ |
| int __weak __init watchdog_hardlockup_probe(void) |
| { |
| return -ENODEV; |
| } |
| |
| /** |
| * watchdog_hardlockup_stop - Stop the watchdog for reconfiguration |
| * |
| * The reconfiguration steps are: |
| * watchdog_hardlockup_stop(); |
| * update_variables(); |
| * watchdog_hardlockup_start(); |
| */ |
| void __weak watchdog_hardlockup_stop(void) { } |
| |
| /** |
| * watchdog_hardlockup_start - Start the watchdog after reconfiguration |
| * |
| * Counterpart to watchdog_hardlockup_stop(). |
| * |
| * The following variables have been updated in update_variables() and |
| * contain the currently valid configuration: |
| * - watchdog_enabled |
| * - watchdog_thresh |
| * - watchdog_cpumask |
| */ |
| void __weak watchdog_hardlockup_start(void) { } |
| |
| /** |
| * lockup_detector_update_enable - Update the sysctl enable bit |
| * |
| * Caller needs to make sure that the hard watchdogs are off, so this |
| * can't race with watchdog_hardlockup_disable(). |
| */ |
| static void lockup_detector_update_enable(void) |
| { |
| watchdog_enabled = 0; |
| if (!watchdog_user_enabled) |
| return; |
| if (watchdog_hardlockup_available && watchdog_hardlockup_user_enabled) |
| watchdog_enabled |= WATCHDOG_HARDLOCKUP_ENABLED; |
| if (watchdog_softlockup_user_enabled) |
| watchdog_enabled |= WATCHDOG_SOFTOCKUP_ENABLED; |
| } |
| |
| #ifdef CONFIG_SOFTLOCKUP_DETECTOR |
| |
| /* |
| * Delay the soflockup report when running a known slow code. |
| * It does _not_ affect the timestamp of the last successdul reschedule. |
| */ |
| #define SOFTLOCKUP_DELAY_REPORT ULONG_MAX |
| |
| #ifdef CONFIG_SMP |
| int __read_mostly sysctl_softlockup_all_cpu_backtrace; |
| #endif |
| |
| static struct cpumask watchdog_allowed_mask __read_mostly; |
| |
| /* Global variables, exported for sysctl */ |
| unsigned int __read_mostly softlockup_panic = |
| IS_ENABLED(CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC); |
| |
| static bool softlockup_initialized __read_mostly; |
| static u64 __read_mostly sample_period; |
| |
| /* Timestamp taken after the last successful reschedule. */ |
| static DEFINE_PER_CPU(unsigned long, watchdog_touch_ts); |
| /* Timestamp of the last softlockup report. */ |
| static DEFINE_PER_CPU(unsigned long, watchdog_report_ts); |
| static DEFINE_PER_CPU(struct hrtimer, watchdog_hrtimer); |
| static DEFINE_PER_CPU(bool, softlockup_touch_sync); |
| static unsigned long soft_lockup_nmi_warn; |
| |
| static int __init softlockup_panic_setup(char *str) |
| { |
| softlockup_panic = simple_strtoul(str, NULL, 0); |
| return 1; |
| } |
| __setup("softlockup_panic=", softlockup_panic_setup); |
| |
| static int __init nowatchdog_setup(char *str) |
| { |
| watchdog_user_enabled = 0; |
| return 1; |
| } |
| __setup("nowatchdog", nowatchdog_setup); |
| |
| static int __init nosoftlockup_setup(char *str) |
| { |
| watchdog_softlockup_user_enabled = 0; |
| return 1; |
| } |
| __setup("nosoftlockup", nosoftlockup_setup); |
| |
| static int __init watchdog_thresh_setup(char *str) |
| { |
| get_option(&str, &watchdog_thresh); |
| return 1; |
| } |
| __setup("watchdog_thresh=", watchdog_thresh_setup); |
| |
| static void __lockup_detector_cleanup(void); |
| |
| /* |
| * Hard-lockup warnings should be triggered after just a few seconds. Soft- |
| * lockups can have false positives under extreme conditions. So we generally |
| * want a higher threshold for soft lockups than for hard lockups. So we couple |
| * the thresholds with a factor: we make the soft threshold twice the amount of |
| * time the hard threshold is. |
| */ |
| static int get_softlockup_thresh(void) |
| { |
| return watchdog_thresh * 2; |
| } |
| |
| /* |
| * Returns seconds, approximately. We don't need nanosecond |
| * resolution, and we don't need to waste time with a big divide when |
| * 2^30ns == 1.074s. |
| */ |
| static unsigned long get_timestamp(void) |
| { |
| return running_clock() >> 30LL; /* 2^30 ~= 10^9 */ |
| } |
| |
| static void set_sample_period(void) |
| { |
| /* |
| * convert watchdog_thresh from seconds to ns |
| * the divide by 5 is to give hrtimer several chances (two |
| * or three with the current relation between the soft |
| * and hard thresholds) to increment before the |
| * hardlockup detector generates a warning |
| */ |
| sample_period = get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5); |
| watchdog_update_hrtimer_threshold(sample_period); |
| } |
| |
| static void update_report_ts(void) |
| { |
| __this_cpu_write(watchdog_report_ts, get_timestamp()); |
| } |
| |
| /* Commands for resetting the watchdog */ |
| static void update_touch_ts(void) |
| { |
| __this_cpu_write(watchdog_touch_ts, get_timestamp()); |
| update_report_ts(); |
| } |
| |
| /** |
| * touch_softlockup_watchdog_sched - touch watchdog on scheduler stalls |
| * |
| * Call when the scheduler may have stalled for legitimate reasons |
| * preventing the watchdog task from executing - e.g. the scheduler |
| * entering idle state. This should only be used for scheduler events. |
| * Use touch_softlockup_watchdog() for everything else. |
| */ |
| notrace void touch_softlockup_watchdog_sched(void) |
| { |
| /* |
| * Preemption can be enabled. It doesn't matter which CPU's watchdog |
| * report period gets restarted here, so use the raw_ operation. |
| */ |
| raw_cpu_write(watchdog_report_ts, SOFTLOCKUP_DELAY_REPORT); |
| } |
| |
| notrace void touch_softlockup_watchdog(void) |
| { |
| touch_softlockup_watchdog_sched(); |
| wq_watchdog_touch(raw_smp_processor_id()); |
| } |
| EXPORT_SYMBOL(touch_softlockup_watchdog); |
| |
| void touch_all_softlockup_watchdogs(void) |
| { |
| int cpu; |
| |
| /* |
| * watchdog_mutex cannpt be taken here, as this might be called |
| * from (soft)interrupt context, so the access to |
| * watchdog_allowed_cpumask might race with a concurrent update. |
| * |
| * The watchdog time stamp can race against a concurrent real |
| * update as well, the only side effect might be a cycle delay for |
| * the softlockup check. |
| */ |
| for_each_cpu(cpu, &watchdog_allowed_mask) { |
| per_cpu(watchdog_report_ts, cpu) = SOFTLOCKUP_DELAY_REPORT; |
| wq_watchdog_touch(cpu); |
| } |
| } |
| |
| void touch_softlockup_watchdog_sync(void) |
| { |
| __this_cpu_write(softlockup_touch_sync, true); |
| __this_cpu_write(watchdog_report_ts, SOFTLOCKUP_DELAY_REPORT); |
| } |
| |
| static int is_softlockup(unsigned long touch_ts, |
| unsigned long period_ts, |
| unsigned long now) |
| { |
| if ((watchdog_enabled & WATCHDOG_SOFTOCKUP_ENABLED) && watchdog_thresh) { |
| /* Warn about unreasonable delays. */ |
| if (time_after(now, period_ts + get_softlockup_thresh())) |
| return now - touch_ts; |
| } |
| return 0; |
| } |
| |
| /* watchdog detector functions */ |
| static DEFINE_PER_CPU(struct completion, softlockup_completion); |
| static DEFINE_PER_CPU(struct cpu_stop_work, softlockup_stop_work); |
| |
| /* |
| * The watchdog feed function - touches the timestamp. |
| * |
| * It only runs once every sample_period seconds (4 seconds by |
| * default) to reset the softlockup timestamp. If this gets delayed |
| * for more than 2*watchdog_thresh seconds then the debug-printout |
| * triggers in watchdog_timer_fn(). |
| */ |
| static int softlockup_fn(void *data) |
| { |
| update_touch_ts(); |
| complete(this_cpu_ptr(&softlockup_completion)); |
| |
| return 0; |
| } |
| |
| /* watchdog kicker functions */ |
| static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer) |
| { |
| unsigned long touch_ts, period_ts, now; |
| struct pt_regs *regs = get_irq_regs(); |
| int duration; |
| int softlockup_all_cpu_backtrace = sysctl_softlockup_all_cpu_backtrace; |
| |
| if (!watchdog_enabled) |
| return HRTIMER_NORESTART; |
| |
| watchdog_hardlockup_kick(); |
| |
| /* kick the softlockup detector */ |
| if (completion_done(this_cpu_ptr(&softlockup_completion))) { |
| reinit_completion(this_cpu_ptr(&softlockup_completion)); |
| stop_one_cpu_nowait(smp_processor_id(), |
| softlockup_fn, NULL, |
| this_cpu_ptr(&softlockup_stop_work)); |
| } |
| |
| /* .. and repeat */ |
| hrtimer_forward_now(hrtimer, ns_to_ktime(sample_period)); |
| |
| /* |
| * Read the current timestamp first. It might become invalid anytime |
| * when a virtual machine is stopped by the host or when the watchog |
| * is touched from NMI. |
| */ |
| now = get_timestamp(); |
| /* |
| * If a virtual machine is stopped by the host it can look to |
| * the watchdog like a soft lockup. This function touches the watchdog. |
| */ |
| kvm_check_and_clear_guest_paused(); |
| /* |
| * The stored timestamp is comparable with @now only when not touched. |
| * It might get touched anytime from NMI. Make sure that is_softlockup() |
| * uses the same (valid) value. |
| */ |
| period_ts = READ_ONCE(*this_cpu_ptr(&watchdog_report_ts)); |
| |
| /* Reset the interval when touched by known problematic code. */ |
| if (period_ts == SOFTLOCKUP_DELAY_REPORT) { |
| if (unlikely(__this_cpu_read(softlockup_touch_sync))) { |
| /* |
| * If the time stamp was touched atomically |
| * make sure the scheduler tick is up to date. |
| */ |
| __this_cpu_write(softlockup_touch_sync, false); |
| sched_clock_tick(); |
| } |
| |
| update_report_ts(); |
| return HRTIMER_RESTART; |
| } |
| |
| /* Check for a softlockup. */ |
| touch_ts = __this_cpu_read(watchdog_touch_ts); |
| duration = is_softlockup(touch_ts, period_ts, now); |
| if (unlikely(duration)) { |
| /* |
| * Prevent multiple soft-lockup reports if one cpu is already |
| * engaged in dumping all cpu back traces. |
| */ |
| if (softlockup_all_cpu_backtrace) { |
| if (test_and_set_bit_lock(0, &soft_lockup_nmi_warn)) |
| return HRTIMER_RESTART; |
| } |
| |
| /* Start period for the next softlockup warning. */ |
| update_report_ts(); |
| |
| pr_emerg("BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n", |
| smp_processor_id(), duration, |
| current->comm, task_pid_nr(current)); |
| print_modules(); |
| print_irqtrace_events(current); |
| if (regs) |
| show_regs(regs); |
| else |
| dump_stack(); |
| |
| if (softlockup_all_cpu_backtrace) { |
| trigger_allbutcpu_cpu_backtrace(smp_processor_id()); |
| clear_bit_unlock(0, &soft_lockup_nmi_warn); |
| } |
| |
| trace_android_vh_watchdog_timer_softlockup(duration, regs, !!softlockup_panic); |
| add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK); |
| if (softlockup_panic) |
| panic("softlockup: hung tasks"); |
| } |
| |
| return HRTIMER_RESTART; |
| } |
| |
| static void watchdog_enable(unsigned int cpu) |
| { |
| struct hrtimer *hrtimer = this_cpu_ptr(&watchdog_hrtimer); |
| struct completion *done = this_cpu_ptr(&softlockup_completion); |
| |
| WARN_ON_ONCE(cpu != smp_processor_id()); |
| |
| init_completion(done); |
| complete(done); |
| |
| /* |
| * Start the timer first to prevent the hardlockup watchdog triggering |
| * before the timer has a chance to fire. |
| */ |
| hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD); |
| hrtimer->function = watchdog_timer_fn; |
| hrtimer_start(hrtimer, ns_to_ktime(sample_period), |
| HRTIMER_MODE_REL_PINNED_HARD); |
| |
| /* Initialize timestamp */ |
| update_touch_ts(); |
| /* Enable the hardlockup detector */ |
| if (watchdog_enabled & WATCHDOG_HARDLOCKUP_ENABLED) |
| watchdog_hardlockup_enable(cpu); |
| } |
| |
| static void watchdog_disable(unsigned int cpu) |
| { |
| struct hrtimer *hrtimer = this_cpu_ptr(&watchdog_hrtimer); |
| |
| WARN_ON_ONCE(cpu != smp_processor_id()); |
| |
| /* |
| * Disable the hardlockup detector first. That prevents that a large |
| * delay between disabling the timer and disabling the hardlockup |
| * detector causes a false positive. |
| */ |
| watchdog_hardlockup_disable(cpu); |
| hrtimer_cancel(hrtimer); |
| wait_for_completion(this_cpu_ptr(&softlockup_completion)); |
| } |
| |
| static int softlockup_stop_fn(void *data) |
| { |
| watchdog_disable(smp_processor_id()); |
| return 0; |
| } |
| |
| static void softlockup_stop_all(void) |
| { |
| int cpu; |
| |
| if (!softlockup_initialized) |
| return; |
| |
| for_each_cpu(cpu, &watchdog_allowed_mask) |
| smp_call_on_cpu(cpu, softlockup_stop_fn, NULL, false); |
| |
| cpumask_clear(&watchdog_allowed_mask); |
| } |
| |
| static int softlockup_start_fn(void *data) |
| { |
| watchdog_enable(smp_processor_id()); |
| return 0; |
| } |
| |
| static void softlockup_start_all(void) |
| { |
| int cpu; |
| |
| cpumask_copy(&watchdog_allowed_mask, &watchdog_cpumask); |
| for_each_cpu(cpu, &watchdog_allowed_mask) |
| smp_call_on_cpu(cpu, softlockup_start_fn, NULL, false); |
| } |
| |
| int lockup_detector_online_cpu(unsigned int cpu) |
| { |
| if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) |
| watchdog_enable(cpu); |
| return 0; |
| } |
| |
| int lockup_detector_offline_cpu(unsigned int cpu) |
| { |
| if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) |
| watchdog_disable(cpu); |
| return 0; |
| } |
| |
| static void __lockup_detector_reconfigure(void) |
| { |
| cpus_read_lock(); |
| watchdog_hardlockup_stop(); |
| |
| softlockup_stop_all(); |
| set_sample_period(); |
| lockup_detector_update_enable(); |
| if (watchdog_enabled && watchdog_thresh) |
| softlockup_start_all(); |
| |
| watchdog_hardlockup_start(); |
| cpus_read_unlock(); |
| /* |
| * Must be called outside the cpus locked section to prevent |
| * recursive locking in the perf code. |
| */ |
| __lockup_detector_cleanup(); |
| } |
| |
| void lockup_detector_reconfigure(void) |
| { |
| mutex_lock(&watchdog_mutex); |
| __lockup_detector_reconfigure(); |
| mutex_unlock(&watchdog_mutex); |
| } |
| |
| /* |
| * Create the watchdog infrastructure and configure the detector(s). |
| */ |
| static __init void lockup_detector_setup(void) |
| { |
| /* |
| * If sysctl is off and watchdog got disabled on the command line, |
| * nothing to do here. |
| */ |
| lockup_detector_update_enable(); |
| |
| if (!IS_ENABLED(CONFIG_SYSCTL) && |
| !(watchdog_enabled && watchdog_thresh)) |
| return; |
| |
| mutex_lock(&watchdog_mutex); |
| __lockup_detector_reconfigure(); |
| softlockup_initialized = true; |
| mutex_unlock(&watchdog_mutex); |
| } |
| |
| #else /* CONFIG_SOFTLOCKUP_DETECTOR */ |
| static void __lockup_detector_reconfigure(void) |
| { |
| cpus_read_lock(); |
| watchdog_hardlockup_stop(); |
| lockup_detector_update_enable(); |
| watchdog_hardlockup_start(); |
| cpus_read_unlock(); |
| } |
| void lockup_detector_reconfigure(void) |
| { |
| __lockup_detector_reconfigure(); |
| } |
| static inline void lockup_detector_setup(void) |
| { |
| __lockup_detector_reconfigure(); |
| } |
| #endif /* !CONFIG_SOFTLOCKUP_DETECTOR */ |
| |
| static void __lockup_detector_cleanup(void) |
| { |
| lockdep_assert_held(&watchdog_mutex); |
| hardlockup_detector_perf_cleanup(); |
| } |
| |
| /** |
| * lockup_detector_cleanup - Cleanup after cpu hotplug or sysctl changes |
| * |
| * Caller must not hold the cpu hotplug rwsem. |
| */ |
| void lockup_detector_cleanup(void) |
| { |
| mutex_lock(&watchdog_mutex); |
| __lockup_detector_cleanup(); |
| mutex_unlock(&watchdog_mutex); |
| } |
| |
| /** |
| * lockup_detector_soft_poweroff - Interface to stop lockup detector(s) |
| * |
| * Special interface for parisc. It prevents lockup detector warnings from |
| * the default pm_poweroff() function which busy loops forever. |
| */ |
| void lockup_detector_soft_poweroff(void) |
| { |
| watchdog_enabled = 0; |
| } |
| |
| #ifdef CONFIG_SYSCTL |
| |
| /* Propagate any changes to the watchdog infrastructure */ |
| static void proc_watchdog_update(void) |
| { |
| /* Remove impossible cpus to keep sysctl output clean. */ |
| cpumask_and(&watchdog_cpumask, &watchdog_cpumask, cpu_possible_mask); |
| __lockup_detector_reconfigure(); |
| } |
| |
| /* |
| * common function for watchdog, nmi_watchdog and soft_watchdog parameter |
| * |
| * caller | table->data points to | 'which' |
| * -------------------|----------------------------------|------------------------------- |
| * proc_watchdog | watchdog_user_enabled | WATCHDOG_HARDLOCKUP_ENABLED | |
| * | | WATCHDOG_SOFTOCKUP_ENABLED |
| * -------------------|----------------------------------|------------------------------- |
| * proc_nmi_watchdog | watchdog_hardlockup_user_enabled | WATCHDOG_HARDLOCKUP_ENABLED |
| * -------------------|----------------------------------|------------------------------- |
| * proc_soft_watchdog | watchdog_softlockup_user_enabled | WATCHDOG_SOFTOCKUP_ENABLED |
| */ |
| static int proc_watchdog_common(int which, struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int err, old, *param = table->data; |
| |
| mutex_lock(&watchdog_mutex); |
| |
| if (!write) { |
| /* |
| * On read synchronize the userspace interface. This is a |
| * racy snapshot. |
| */ |
| *param = (watchdog_enabled & which) != 0; |
| err = proc_dointvec_minmax(table, write, buffer, lenp, ppos); |
| } else { |
| old = READ_ONCE(*param); |
| err = proc_dointvec_minmax(table, write, buffer, lenp, ppos); |
| if (!err && old != READ_ONCE(*param)) |
| proc_watchdog_update(); |
| } |
| mutex_unlock(&watchdog_mutex); |
| return err; |
| } |
| |
| /* |
| * /proc/sys/kernel/watchdog |
| */ |
| int proc_watchdog(struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return proc_watchdog_common(WATCHDOG_HARDLOCKUP_ENABLED | |
| WATCHDOG_SOFTOCKUP_ENABLED, |
| table, write, buffer, lenp, ppos); |
| } |
| |
| /* |
| * /proc/sys/kernel/nmi_watchdog |
| */ |
| int proc_nmi_watchdog(struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| if (!watchdog_hardlockup_available && write) |
| return -ENOTSUPP; |
| return proc_watchdog_common(WATCHDOG_HARDLOCKUP_ENABLED, |
| table, write, buffer, lenp, ppos); |
| } |
| |
| /* |
| * /proc/sys/kernel/soft_watchdog |
| */ |
| int proc_soft_watchdog(struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return proc_watchdog_common(WATCHDOG_SOFTOCKUP_ENABLED, |
| table, write, buffer, lenp, ppos); |
| } |
| |
| /* |
| * /proc/sys/kernel/watchdog_thresh |
| */ |
| int proc_watchdog_thresh(struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int err, old; |
| |
| mutex_lock(&watchdog_mutex); |
| |
| old = READ_ONCE(watchdog_thresh); |
| err = proc_dointvec_minmax(table, write, buffer, lenp, ppos); |
| |
| if (!err && write && old != READ_ONCE(watchdog_thresh)) |
| proc_watchdog_update(); |
| |
| mutex_unlock(&watchdog_mutex); |
| return err; |
| } |
| |
| /* |
| * The cpumask is the mask of possible cpus that the watchdog can run |
| * on, not the mask of cpus it is actually running on. This allows the |
| * user to specify a mask that will include cpus that have not yet |
| * been brought online, if desired. |
| */ |
| int proc_watchdog_cpumask(struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int err; |
| |
| mutex_lock(&watchdog_mutex); |
| |
| err = proc_do_large_bitmap(table, write, buffer, lenp, ppos); |
| if (!err && write) |
| proc_watchdog_update(); |
| |
| mutex_unlock(&watchdog_mutex); |
| return err; |
| } |
| |
| static const int sixty = 60; |
| |
| static struct ctl_table watchdog_sysctls[] = { |
| { |
| .procname = "watchdog", |
| .data = &watchdog_user_enabled, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_watchdog, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = SYSCTL_ONE, |
| }, |
| { |
| .procname = "watchdog_thresh", |
| .data = &watchdog_thresh, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_watchdog_thresh, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = (void *)&sixty, |
| }, |
| { |
| .procname = "watchdog_cpumask", |
| .data = &watchdog_cpumask_bits, |
| .maxlen = NR_CPUS, |
| .mode = 0644, |
| .proc_handler = proc_watchdog_cpumask, |
| }, |
| #ifdef CONFIG_SOFTLOCKUP_DETECTOR |
| { |
| .procname = "soft_watchdog", |
| .data = &watchdog_softlockup_user_enabled, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_soft_watchdog, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = SYSCTL_ONE, |
| }, |
| { |
| .procname = "softlockup_panic", |
| .data = &softlockup_panic, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_dointvec_minmax, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = SYSCTL_ONE, |
| }, |
| #ifdef CONFIG_SMP |
| { |
| .procname = "softlockup_all_cpu_backtrace", |
| .data = &sysctl_softlockup_all_cpu_backtrace, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_dointvec_minmax, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = SYSCTL_ONE, |
| }, |
| #endif /* CONFIG_SMP */ |
| #endif |
| #ifdef CONFIG_HARDLOCKUP_DETECTOR |
| { |
| .procname = "hardlockup_panic", |
| .data = &hardlockup_panic, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_dointvec_minmax, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = SYSCTL_ONE, |
| }, |
| #ifdef CONFIG_SMP |
| { |
| .procname = "hardlockup_all_cpu_backtrace", |
| .data = &sysctl_hardlockup_all_cpu_backtrace, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_dointvec_minmax, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = SYSCTL_ONE, |
| }, |
| #endif /* CONFIG_SMP */ |
| #endif |
| {} |
| }; |
| |
| static struct ctl_table watchdog_hardlockup_sysctl[] = { |
| { |
| .procname = "nmi_watchdog", |
| .data = &watchdog_hardlockup_user_enabled, |
| .maxlen = sizeof(int), |
| .mode = 0444, |
| .proc_handler = proc_nmi_watchdog, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = SYSCTL_ONE, |
| }, |
| {} |
| }; |
| |
| static void __init watchdog_sysctl_init(void) |
| { |
| register_sysctl_init("kernel", watchdog_sysctls); |
| |
| if (watchdog_hardlockup_available) |
| watchdog_hardlockup_sysctl[0].mode = 0644; |
| register_sysctl_init("kernel", watchdog_hardlockup_sysctl); |
| } |
| |
| #else |
| #define watchdog_sysctl_init() do { } while (0) |
| #endif /* CONFIG_SYSCTL */ |
| |
| static void __init lockup_detector_delay_init(struct work_struct *work); |
| static bool allow_lockup_detector_init_retry __initdata; |
| |
| static struct work_struct detector_work __initdata = |
| __WORK_INITIALIZER(detector_work, lockup_detector_delay_init); |
| |
| static void __init lockup_detector_delay_init(struct work_struct *work) |
| { |
| int ret; |
| |
| ret = watchdog_hardlockup_probe(); |
| if (ret) { |
| pr_info("Delayed init of the lockup detector failed: %d\n", ret); |
| pr_info("Hard watchdog permanently disabled\n"); |
| return; |
| } |
| |
| allow_lockup_detector_init_retry = false; |
| |
| watchdog_hardlockup_available = true; |
| lockup_detector_setup(); |
| } |
| |
| /* |
| * lockup_detector_retry_init - retry init lockup detector if possible. |
| * |
| * Retry hardlockup detector init. It is useful when it requires some |
| * functionality that has to be initialized later on a particular |
| * platform. |
| */ |
| void __init lockup_detector_retry_init(void) |
| { |
| /* Must be called before late init calls */ |
| if (!allow_lockup_detector_init_retry) |
| return; |
| |
| schedule_work(&detector_work); |
| } |
| |
| /* |
| * Ensure that optional delayed hardlockup init is proceed before |
| * the init code and memory is freed. |
| */ |
| static int __init lockup_detector_check(void) |
| { |
| /* Prevent any later retry. */ |
| allow_lockup_detector_init_retry = false; |
| |
| /* Make sure no work is pending. */ |
| flush_work(&detector_work); |
| |
| watchdog_sysctl_init(); |
| |
| return 0; |
| |
| } |
| late_initcall_sync(lockup_detector_check); |
| |
| void __init lockup_detector_init(void) |
| { |
| if (tick_nohz_full_enabled()) |
| pr_info("Disabling watchdog on nohz_full cores by default\n"); |
| |
| cpumask_copy(&watchdog_cpumask, |
| housekeeping_cpumask(HK_TYPE_TIMER)); |
| |
| if (!watchdog_hardlockup_probe()) |
| watchdog_hardlockup_available = true; |
| else |
| allow_lockup_detector_init_retry = true; |
| |
| lockup_detector_setup(); |
| } |