| /* -*- mode: c; c-basic-offset: 8; -*- |
| * vim: noexpandtab sw=8 ts=8 sts=0: |
| * |
| * stack_user.c |
| * |
| * Code which interfaces ocfs2 with fs/dlm and a userspace stack. |
| * |
| * Copyright (C) 2007 Oracle. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public |
| * License as published by the Free Software Foundation, version 2. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/miscdevice.h> |
| #include <linux/mutex.h> |
| #include <linux/smp_lock.h> |
| #include <linux/reboot.h> |
| #include <asm/uaccess.h> |
| |
| #include "ocfs2.h" /* For struct ocfs2_lock_res */ |
| #include "stackglue.h" |
| |
| |
| /* |
| * The control protocol starts with a handshake. Until the handshake |
| * is complete, the control device will fail all write(2)s. |
| * |
| * The handshake is simple. First, the client reads until EOF. Each line |
| * of output is a supported protocol tag. All protocol tags are a single |
| * character followed by a two hex digit version number. Currently the |
| * only things supported is T01, for "Text-base version 0x01". Next, the |
| * client writes the version they would like to use, including the newline. |
| * Thus, the protocol tag is 'T01\n'. If the version tag written is |
| * unknown, -EINVAL is returned. Once the negotiation is complete, the |
| * client can start sending messages. |
| * |
| * The T01 protocol has three messages. First is the "SETN" message. |
| * It has the following syntax: |
| * |
| * SETN<space><8-char-hex-nodenum><newline> |
| * |
| * This is 14 characters. |
| * |
| * The "SETN" message must be the first message following the protocol. |
| * It tells ocfs2_control the local node number. |
| * |
| * Next comes the "SETV" message. It has the following syntax: |
| * |
| * SETV<space><2-char-hex-major><space><2-char-hex-minor><newline> |
| * |
| * This is 11 characters. |
| * |
| * The "SETV" message sets the filesystem locking protocol version as |
| * negotiated by the client. The client negotiates based on the maximum |
| * version advertised in /sys/fs/ocfs2/max_locking_protocol. The major |
| * number from the "SETV" message must match |
| * ocfs2_user_plugin.sp_proto->lp_max_version.pv_major, and the minor number |
| * must be less than or equal to ...->lp_max_version.pv_minor. |
| * |
| * Once this information has been set, mounts will be allowed. From this |
| * point on, the "DOWN" message can be sent for node down notification. |
| * It has the following syntax: |
| * |
| * DOWN<space><32-char-cap-hex-uuid><space><8-char-hex-nodenum><newline> |
| * |
| * eg: |
| * |
| * DOWN 632A924FDD844190BDA93C0DF6B94899 00000001\n |
| * |
| * This is 47 characters. |
| */ |
| |
| /* |
| * Whether or not the client has done the handshake. |
| * For now, we have just one protocol version. |
| */ |
| #define OCFS2_CONTROL_PROTO "T01\n" |
| #define OCFS2_CONTROL_PROTO_LEN 4 |
| |
| /* Handshake states */ |
| #define OCFS2_CONTROL_HANDSHAKE_INVALID (0) |
| #define OCFS2_CONTROL_HANDSHAKE_READ (1) |
| #define OCFS2_CONTROL_HANDSHAKE_PROTOCOL (2) |
| #define OCFS2_CONTROL_HANDSHAKE_VALID (3) |
| |
| /* Messages */ |
| #define OCFS2_CONTROL_MESSAGE_OP_LEN 4 |
| #define OCFS2_CONTROL_MESSAGE_SETNODE_OP "SETN" |
| #define OCFS2_CONTROL_MESSAGE_SETNODE_TOTAL_LEN 14 |
| #define OCFS2_CONTROL_MESSAGE_SETVERSION_OP "SETV" |
| #define OCFS2_CONTROL_MESSAGE_SETVERSION_TOTAL_LEN 11 |
| #define OCFS2_CONTROL_MESSAGE_DOWN_OP "DOWN" |
| #define OCFS2_CONTROL_MESSAGE_DOWN_TOTAL_LEN 47 |
| #define OCFS2_TEXT_UUID_LEN 32 |
| #define OCFS2_CONTROL_MESSAGE_VERNUM_LEN 2 |
| #define OCFS2_CONTROL_MESSAGE_NODENUM_LEN 8 |
| |
| /* |
| * ocfs2_live_connection is refcounted because the filesystem and |
| * miscdevice sides can detach in different order. Let's just be safe. |
| */ |
| struct ocfs2_live_connection { |
| struct list_head oc_list; |
| struct ocfs2_cluster_connection *oc_conn; |
| }; |
| |
| struct ocfs2_control_private { |
| struct list_head op_list; |
| int op_state; |
| int op_this_node; |
| struct ocfs2_protocol_version op_proto; |
| }; |
| |
| /* SETN<space><8-char-hex-nodenum><newline> */ |
| struct ocfs2_control_message_setn { |
| char tag[OCFS2_CONTROL_MESSAGE_OP_LEN]; |
| char space; |
| char nodestr[OCFS2_CONTROL_MESSAGE_NODENUM_LEN]; |
| char newline; |
| }; |
| |
| /* SETV<space><2-char-hex-major><space><2-char-hex-minor><newline> */ |
| struct ocfs2_control_message_setv { |
| char tag[OCFS2_CONTROL_MESSAGE_OP_LEN]; |
| char space1; |
| char major[OCFS2_CONTROL_MESSAGE_VERNUM_LEN]; |
| char space2; |
| char minor[OCFS2_CONTROL_MESSAGE_VERNUM_LEN]; |
| char newline; |
| }; |
| |
| /* DOWN<space><32-char-cap-hex-uuid><space><8-char-hex-nodenum><newline> */ |
| struct ocfs2_control_message_down { |
| char tag[OCFS2_CONTROL_MESSAGE_OP_LEN]; |
| char space1; |
| char uuid[OCFS2_TEXT_UUID_LEN]; |
| char space2; |
| char nodestr[OCFS2_CONTROL_MESSAGE_NODENUM_LEN]; |
| char newline; |
| }; |
| |
| union ocfs2_control_message { |
| char tag[OCFS2_CONTROL_MESSAGE_OP_LEN]; |
| struct ocfs2_control_message_setn u_setn; |
| struct ocfs2_control_message_setv u_setv; |
| struct ocfs2_control_message_down u_down; |
| }; |
| |
| static struct ocfs2_stack_plugin ocfs2_user_plugin; |
| |
| static atomic_t ocfs2_control_opened; |
| static int ocfs2_control_this_node = -1; |
| static struct ocfs2_protocol_version running_proto; |
| |
| static LIST_HEAD(ocfs2_live_connection_list); |
| static LIST_HEAD(ocfs2_control_private_list); |
| static DEFINE_MUTEX(ocfs2_control_lock); |
| |
| static inline void ocfs2_control_set_handshake_state(struct file *file, |
| int state) |
| { |
| struct ocfs2_control_private *p = file->private_data; |
| p->op_state = state; |
| } |
| |
| static inline int ocfs2_control_get_handshake_state(struct file *file) |
| { |
| struct ocfs2_control_private *p = file->private_data; |
| return p->op_state; |
| } |
| |
| static struct ocfs2_live_connection *ocfs2_connection_find(const char *name) |
| { |
| size_t len = strlen(name); |
| struct ocfs2_live_connection *c; |
| |
| BUG_ON(!mutex_is_locked(&ocfs2_control_lock)); |
| |
| list_for_each_entry(c, &ocfs2_live_connection_list, oc_list) { |
| if ((c->oc_conn->cc_namelen == len) && |
| !strncmp(c->oc_conn->cc_name, name, len)) |
| return c; |
| } |
| |
| return c; |
| } |
| |
| /* |
| * ocfs2_live_connection structures are created underneath the ocfs2 |
| * mount path. Since the VFS prevents multiple calls to |
| * fill_super(), we can't get dupes here. |
| */ |
| static int ocfs2_live_connection_new(struct ocfs2_cluster_connection *conn, |
| struct ocfs2_live_connection **c_ret) |
| { |
| int rc = 0; |
| struct ocfs2_live_connection *c; |
| |
| c = kzalloc(sizeof(struct ocfs2_live_connection), GFP_KERNEL); |
| if (!c) |
| return -ENOMEM; |
| |
| mutex_lock(&ocfs2_control_lock); |
| c->oc_conn = conn; |
| |
| if (atomic_read(&ocfs2_control_opened)) |
| list_add(&c->oc_list, &ocfs2_live_connection_list); |
| else { |
| printk(KERN_ERR |
| "ocfs2: Userspace control daemon is not present\n"); |
| rc = -ESRCH; |
| } |
| |
| mutex_unlock(&ocfs2_control_lock); |
| |
| if (!rc) |
| *c_ret = c; |
| else |
| kfree(c); |
| |
| return rc; |
| } |
| |
| /* |
| * This function disconnects the cluster connection from ocfs2_control. |
| * Afterwards, userspace can't affect the cluster connection. |
| */ |
| static void ocfs2_live_connection_drop(struct ocfs2_live_connection *c) |
| { |
| mutex_lock(&ocfs2_control_lock); |
| list_del_init(&c->oc_list); |
| c->oc_conn = NULL; |
| mutex_unlock(&ocfs2_control_lock); |
| |
| kfree(c); |
| } |
| |
| static int ocfs2_control_cfu(void *target, size_t target_len, |
| const char __user *buf, size_t count) |
| { |
| /* The T01 expects write(2) calls to have exactly one command */ |
| if ((count != target_len) || |
| (count > sizeof(union ocfs2_control_message))) |
| return -EINVAL; |
| |
| if (copy_from_user(target, buf, target_len)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static ssize_t ocfs2_control_validate_protocol(struct file *file, |
| const char __user *buf, |
| size_t count) |
| { |
| ssize_t ret; |
| char kbuf[OCFS2_CONTROL_PROTO_LEN]; |
| |
| ret = ocfs2_control_cfu(kbuf, OCFS2_CONTROL_PROTO_LEN, |
| buf, count); |
| if (ret) |
| return ret; |
| |
| if (strncmp(kbuf, OCFS2_CONTROL_PROTO, OCFS2_CONTROL_PROTO_LEN)) |
| return -EINVAL; |
| |
| ocfs2_control_set_handshake_state(file, |
| OCFS2_CONTROL_HANDSHAKE_PROTOCOL); |
| |
| return count; |
| } |
| |
| static void ocfs2_control_send_down(const char *uuid, |
| int nodenum) |
| { |
| struct ocfs2_live_connection *c; |
| |
| mutex_lock(&ocfs2_control_lock); |
| |
| c = ocfs2_connection_find(uuid); |
| if (c) { |
| BUG_ON(c->oc_conn == NULL); |
| c->oc_conn->cc_recovery_handler(nodenum, |
| c->oc_conn->cc_recovery_data); |
| } |
| |
| mutex_unlock(&ocfs2_control_lock); |
| } |
| |
| /* |
| * Called whenever configuration elements are sent to /dev/ocfs2_control. |
| * If all configuration elements are present, try to set the global |
| * values. If there is a problem, return an error. Skip any missing |
| * elements, and only bump ocfs2_control_opened when we have all elements |
| * and are successful. |
| */ |
| static int ocfs2_control_install_private(struct file *file) |
| { |
| int rc = 0; |
| int set_p = 1; |
| struct ocfs2_control_private *p = file->private_data; |
| |
| BUG_ON(p->op_state != OCFS2_CONTROL_HANDSHAKE_PROTOCOL); |
| |
| mutex_lock(&ocfs2_control_lock); |
| |
| if (p->op_this_node < 0) { |
| set_p = 0; |
| } else if ((ocfs2_control_this_node >= 0) && |
| (ocfs2_control_this_node != p->op_this_node)) { |
| rc = -EINVAL; |
| goto out_unlock; |
| } |
| |
| if (!p->op_proto.pv_major) { |
| set_p = 0; |
| } else if (!list_empty(&ocfs2_live_connection_list) && |
| ((running_proto.pv_major != p->op_proto.pv_major) || |
| (running_proto.pv_minor != p->op_proto.pv_minor))) { |
| rc = -EINVAL; |
| goto out_unlock; |
| } |
| |
| if (set_p) { |
| ocfs2_control_this_node = p->op_this_node; |
| running_proto.pv_major = p->op_proto.pv_major; |
| running_proto.pv_minor = p->op_proto.pv_minor; |
| } |
| |
| out_unlock: |
| mutex_unlock(&ocfs2_control_lock); |
| |
| if (!rc && set_p) { |
| /* We set the global values successfully */ |
| atomic_inc(&ocfs2_control_opened); |
| ocfs2_control_set_handshake_state(file, |
| OCFS2_CONTROL_HANDSHAKE_VALID); |
| } |
| |
| return rc; |
| } |
| |
| static int ocfs2_control_get_this_node(void) |
| { |
| int rc; |
| |
| mutex_lock(&ocfs2_control_lock); |
| if (ocfs2_control_this_node < 0) |
| rc = -EINVAL; |
| else |
| rc = ocfs2_control_this_node; |
| mutex_unlock(&ocfs2_control_lock); |
| |
| return rc; |
| } |
| |
| static int ocfs2_control_do_setnode_msg(struct file *file, |
| struct ocfs2_control_message_setn *msg) |
| { |
| long nodenum; |
| char *ptr = NULL; |
| struct ocfs2_control_private *p = file->private_data; |
| |
| if (ocfs2_control_get_handshake_state(file) != |
| OCFS2_CONTROL_HANDSHAKE_PROTOCOL) |
| return -EINVAL; |
| |
| if (strncmp(msg->tag, OCFS2_CONTROL_MESSAGE_SETNODE_OP, |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) |
| return -EINVAL; |
| |
| if ((msg->space != ' ') || (msg->newline != '\n')) |
| return -EINVAL; |
| msg->space = msg->newline = '\0'; |
| |
| nodenum = simple_strtol(msg->nodestr, &ptr, 16); |
| if (!ptr || *ptr) |
| return -EINVAL; |
| |
| if ((nodenum == LONG_MIN) || (nodenum == LONG_MAX) || |
| (nodenum > INT_MAX) || (nodenum < 0)) |
| return -ERANGE; |
| p->op_this_node = nodenum; |
| |
| return ocfs2_control_install_private(file); |
| } |
| |
| static int ocfs2_control_do_setversion_msg(struct file *file, |
| struct ocfs2_control_message_setv *msg) |
| { |
| long major, minor; |
| char *ptr = NULL; |
| struct ocfs2_control_private *p = file->private_data; |
| struct ocfs2_protocol_version *max = |
| &ocfs2_user_plugin.sp_proto->lp_max_version; |
| |
| if (ocfs2_control_get_handshake_state(file) != |
| OCFS2_CONTROL_HANDSHAKE_PROTOCOL) |
| return -EINVAL; |
| |
| if (strncmp(msg->tag, OCFS2_CONTROL_MESSAGE_SETVERSION_OP, |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) |
| return -EINVAL; |
| |
| if ((msg->space1 != ' ') || (msg->space2 != ' ') || |
| (msg->newline != '\n')) |
| return -EINVAL; |
| msg->space1 = msg->space2 = msg->newline = '\0'; |
| |
| major = simple_strtol(msg->major, &ptr, 16); |
| if (!ptr || *ptr) |
| return -EINVAL; |
| minor = simple_strtol(msg->minor, &ptr, 16); |
| if (!ptr || *ptr) |
| return -EINVAL; |
| |
| /* |
| * The major must be between 1 and 255, inclusive. The minor |
| * must be between 0 and 255, inclusive. The version passed in |
| * must be within the maximum version supported by the filesystem. |
| */ |
| if ((major == LONG_MIN) || (major == LONG_MAX) || |
| (major > (u8)-1) || (major < 1)) |
| return -ERANGE; |
| if ((minor == LONG_MIN) || (minor == LONG_MAX) || |
| (minor > (u8)-1) || (minor < 0)) |
| return -ERANGE; |
| if ((major != max->pv_major) || |
| (minor > max->pv_minor)) |
| return -EINVAL; |
| |
| p->op_proto.pv_major = major; |
| p->op_proto.pv_minor = minor; |
| |
| return ocfs2_control_install_private(file); |
| } |
| |
| static int ocfs2_control_do_down_msg(struct file *file, |
| struct ocfs2_control_message_down *msg) |
| { |
| long nodenum; |
| char *p = NULL; |
| |
| if (ocfs2_control_get_handshake_state(file) != |
| OCFS2_CONTROL_HANDSHAKE_VALID) |
| return -EINVAL; |
| |
| if (strncmp(msg->tag, OCFS2_CONTROL_MESSAGE_DOWN_OP, |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) |
| return -EINVAL; |
| |
| if ((msg->space1 != ' ') || (msg->space2 != ' ') || |
| (msg->newline != '\n')) |
| return -EINVAL; |
| msg->space1 = msg->space2 = msg->newline = '\0'; |
| |
| nodenum = simple_strtol(msg->nodestr, &p, 16); |
| if (!p || *p) |
| return -EINVAL; |
| |
| if ((nodenum == LONG_MIN) || (nodenum == LONG_MAX) || |
| (nodenum > INT_MAX) || (nodenum < 0)) |
| return -ERANGE; |
| |
| ocfs2_control_send_down(msg->uuid, nodenum); |
| |
| return 0; |
| } |
| |
| static ssize_t ocfs2_control_message(struct file *file, |
| const char __user *buf, |
| size_t count) |
| { |
| ssize_t ret; |
| union ocfs2_control_message msg; |
| |
| /* Try to catch padding issues */ |
| WARN_ON(offsetof(struct ocfs2_control_message_down, uuid) != |
| (sizeof(msg.u_down.tag) + sizeof(msg.u_down.space1))); |
| |
| memset(&msg, 0, sizeof(union ocfs2_control_message)); |
| ret = ocfs2_control_cfu(&msg, count, buf, count); |
| if (ret) |
| goto out; |
| |
| if ((count == OCFS2_CONTROL_MESSAGE_SETNODE_TOTAL_LEN) && |
| !strncmp(msg.tag, OCFS2_CONTROL_MESSAGE_SETNODE_OP, |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) |
| ret = ocfs2_control_do_setnode_msg(file, &msg.u_setn); |
| else if ((count == OCFS2_CONTROL_MESSAGE_SETVERSION_TOTAL_LEN) && |
| !strncmp(msg.tag, OCFS2_CONTROL_MESSAGE_SETVERSION_OP, |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) |
| ret = ocfs2_control_do_setversion_msg(file, &msg.u_setv); |
| else if ((count == OCFS2_CONTROL_MESSAGE_DOWN_TOTAL_LEN) && |
| !strncmp(msg.tag, OCFS2_CONTROL_MESSAGE_DOWN_OP, |
| OCFS2_CONTROL_MESSAGE_OP_LEN)) |
| ret = ocfs2_control_do_down_msg(file, &msg.u_down); |
| else |
| ret = -EINVAL; |
| |
| out: |
| return ret ? ret : count; |
| } |
| |
| static ssize_t ocfs2_control_write(struct file *file, |
| const char __user *buf, |
| size_t count, |
| loff_t *ppos) |
| { |
| ssize_t ret; |
| |
| switch (ocfs2_control_get_handshake_state(file)) { |
| case OCFS2_CONTROL_HANDSHAKE_INVALID: |
| ret = -EINVAL; |
| break; |
| |
| case OCFS2_CONTROL_HANDSHAKE_READ: |
| ret = ocfs2_control_validate_protocol(file, buf, |
| count); |
| break; |
| |
| case OCFS2_CONTROL_HANDSHAKE_PROTOCOL: |
| case OCFS2_CONTROL_HANDSHAKE_VALID: |
| ret = ocfs2_control_message(file, buf, count); |
| break; |
| |
| default: |
| BUG(); |
| ret = -EIO; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * This is a naive version. If we ever have a new protocol, we'll expand |
| * it. Probably using seq_file. |
| */ |
| static ssize_t ocfs2_control_read(struct file *file, |
| char __user *buf, |
| size_t count, |
| loff_t *ppos) |
| { |
| ssize_t ret; |
| |
| ret = simple_read_from_buffer(buf, count, ppos, |
| OCFS2_CONTROL_PROTO, OCFS2_CONTROL_PROTO_LEN); |
| |
| /* Have we read the whole protocol list? */ |
| if (ret > 0 && *ppos >= OCFS2_CONTROL_PROTO_LEN) |
| ocfs2_control_set_handshake_state(file, |
| OCFS2_CONTROL_HANDSHAKE_READ); |
| |
| return ret; |
| } |
| |
| static int ocfs2_control_release(struct inode *inode, struct file *file) |
| { |
| struct ocfs2_control_private *p = file->private_data; |
| |
| mutex_lock(&ocfs2_control_lock); |
| |
| if (ocfs2_control_get_handshake_state(file) != |
| OCFS2_CONTROL_HANDSHAKE_VALID) |
| goto out; |
| |
| if (atomic_dec_and_test(&ocfs2_control_opened)) { |
| if (!list_empty(&ocfs2_live_connection_list)) { |
| /* XXX: Do bad things! */ |
| printk(KERN_ERR |
| "ocfs2: Unexpected release of ocfs2_control!\n" |
| " Loss of cluster connection requires " |
| "an emergency restart!\n"); |
| emergency_restart(); |
| } |
| /* |
| * Last valid close clears the node number and resets |
| * the locking protocol version |
| */ |
| ocfs2_control_this_node = -1; |
| running_proto.pv_major = 0; |
| running_proto.pv_major = 0; |
| } |
| |
| out: |
| list_del_init(&p->op_list); |
| file->private_data = NULL; |
| |
| mutex_unlock(&ocfs2_control_lock); |
| |
| kfree(p); |
| |
| return 0; |
| } |
| |
| static int ocfs2_control_open(struct inode *inode, struct file *file) |
| { |
| struct ocfs2_control_private *p; |
| |
| p = kzalloc(sizeof(struct ocfs2_control_private), GFP_KERNEL); |
| if (!p) |
| return -ENOMEM; |
| p->op_this_node = -1; |
| |
| lock_kernel(); |
| mutex_lock(&ocfs2_control_lock); |
| file->private_data = p; |
| list_add(&p->op_list, &ocfs2_control_private_list); |
| mutex_unlock(&ocfs2_control_lock); |
| unlock_kernel(); |
| |
| return 0; |
| } |
| |
| static const struct file_operations ocfs2_control_fops = { |
| .open = ocfs2_control_open, |
| .release = ocfs2_control_release, |
| .read = ocfs2_control_read, |
| .write = ocfs2_control_write, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct miscdevice ocfs2_control_device = { |
| .minor = MISC_DYNAMIC_MINOR, |
| .name = "ocfs2_control", |
| .fops = &ocfs2_control_fops, |
| }; |
| |
| static int ocfs2_control_init(void) |
| { |
| int rc; |
| |
| atomic_set(&ocfs2_control_opened, 0); |
| |
| rc = misc_register(&ocfs2_control_device); |
| if (rc) |
| printk(KERN_ERR |
| "ocfs2: Unable to register ocfs2_control device " |
| "(errno %d)\n", |
| -rc); |
| |
| return rc; |
| } |
| |
| static void ocfs2_control_exit(void) |
| { |
| int rc; |
| |
| rc = misc_deregister(&ocfs2_control_device); |
| if (rc) |
| printk(KERN_ERR |
| "ocfs2: Unable to deregister ocfs2_control device " |
| "(errno %d)\n", |
| -rc); |
| } |
| |
| static struct dlm_lksb *fsdlm_astarg_to_lksb(void *astarg) |
| { |
| struct ocfs2_lock_res *res = astarg; |
| return &res->l_lksb.lksb_fsdlm; |
| } |
| |
| static void fsdlm_lock_ast_wrapper(void *astarg) |
| { |
| struct dlm_lksb *lksb = fsdlm_astarg_to_lksb(astarg); |
| int status = lksb->sb_status; |
| |
| BUG_ON(ocfs2_user_plugin.sp_proto == NULL); |
| |
| /* |
| * For now we're punting on the issue of other non-standard errors |
| * where we can't tell if the unlock_ast or lock_ast should be called. |
| * The main "other error" that's possible is EINVAL which means the |
| * function was called with invalid args, which shouldn't be possible |
| * since the caller here is under our control. Other non-standard |
| * errors probably fall into the same category, or otherwise are fatal |
| * which means we can't carry on anyway. |
| */ |
| |
| if (status == -DLM_EUNLOCK || status == -DLM_ECANCEL) |
| ocfs2_user_plugin.sp_proto->lp_unlock_ast(astarg, 0); |
| else |
| ocfs2_user_plugin.sp_proto->lp_lock_ast(astarg); |
| } |
| |
| static void fsdlm_blocking_ast_wrapper(void *astarg, int level) |
| { |
| BUG_ON(ocfs2_user_plugin.sp_proto == NULL); |
| |
| ocfs2_user_plugin.sp_proto->lp_blocking_ast(astarg, level); |
| } |
| |
| static int user_dlm_lock(struct ocfs2_cluster_connection *conn, |
| int mode, |
| union ocfs2_dlm_lksb *lksb, |
| u32 flags, |
| void *name, |
| unsigned int namelen, |
| void *astarg) |
| { |
| int ret; |
| |
| if (!lksb->lksb_fsdlm.sb_lvbptr) |
| lksb->lksb_fsdlm.sb_lvbptr = (char *)lksb + |
| sizeof(struct dlm_lksb); |
| |
| ret = dlm_lock(conn->cc_lockspace, mode, &lksb->lksb_fsdlm, |
| flags|DLM_LKF_NODLCKWT, name, namelen, 0, |
| fsdlm_lock_ast_wrapper, astarg, |
| fsdlm_blocking_ast_wrapper); |
| return ret; |
| } |
| |
| static int user_dlm_unlock(struct ocfs2_cluster_connection *conn, |
| union ocfs2_dlm_lksb *lksb, |
| u32 flags, |
| void *astarg) |
| { |
| int ret; |
| |
| ret = dlm_unlock(conn->cc_lockspace, lksb->lksb_fsdlm.sb_lkid, |
| flags, &lksb->lksb_fsdlm, astarg); |
| return ret; |
| } |
| |
| static int user_dlm_lock_status(union ocfs2_dlm_lksb *lksb) |
| { |
| return lksb->lksb_fsdlm.sb_status; |
| } |
| |
| static void *user_dlm_lvb(union ocfs2_dlm_lksb *lksb) |
| { |
| return (void *)(lksb->lksb_fsdlm.sb_lvbptr); |
| } |
| |
| static void user_dlm_dump_lksb(union ocfs2_dlm_lksb *lksb) |
| { |
| } |
| |
| /* |
| * Compare a requested locking protocol version against the current one. |
| * |
| * If the major numbers are different, they are incompatible. |
| * If the current minor is greater than the request, they are incompatible. |
| * If the current minor is less than or equal to the request, they are |
| * compatible, and the requester should run at the current minor version. |
| */ |
| static int fs_protocol_compare(struct ocfs2_protocol_version *existing, |
| struct ocfs2_protocol_version *request) |
| { |
| if (existing->pv_major != request->pv_major) |
| return 1; |
| |
| if (existing->pv_minor > request->pv_minor) |
| return 1; |
| |
| if (existing->pv_minor < request->pv_minor) |
| request->pv_minor = existing->pv_minor; |
| |
| return 0; |
| } |
| |
| static int user_cluster_connect(struct ocfs2_cluster_connection *conn) |
| { |
| dlm_lockspace_t *fsdlm; |
| struct ocfs2_live_connection *control; |
| int rc = 0; |
| |
| BUG_ON(conn == NULL); |
| |
| rc = ocfs2_live_connection_new(conn, &control); |
| if (rc) |
| goto out; |
| |
| /* |
| * running_proto must have been set before we allowed any mounts |
| * to proceed. |
| */ |
| if (fs_protocol_compare(&running_proto, &conn->cc_version)) { |
| printk(KERN_ERR |
| "Unable to mount with fs locking protocol version " |
| "%u.%u because the userspace control daemon has " |
| "negotiated %u.%u\n", |
| conn->cc_version.pv_major, conn->cc_version.pv_minor, |
| running_proto.pv_major, running_proto.pv_minor); |
| rc = -EPROTO; |
| ocfs2_live_connection_drop(control); |
| goto out; |
| } |
| |
| rc = dlm_new_lockspace(conn->cc_name, strlen(conn->cc_name), |
| &fsdlm, DLM_LSFL_FS, DLM_LVB_LEN); |
| if (rc) { |
| ocfs2_live_connection_drop(control); |
| goto out; |
| } |
| |
| conn->cc_private = control; |
| conn->cc_lockspace = fsdlm; |
| out: |
| return rc; |
| } |
| |
| static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn) |
| { |
| dlm_release_lockspace(conn->cc_lockspace, 2); |
| conn->cc_lockspace = NULL; |
| ocfs2_live_connection_drop(conn->cc_private); |
| conn->cc_private = NULL; |
| return 0; |
| } |
| |
| static int user_cluster_this_node(unsigned int *this_node) |
| { |
| int rc; |
| |
| rc = ocfs2_control_get_this_node(); |
| if (rc < 0) |
| return rc; |
| |
| *this_node = rc; |
| return 0; |
| } |
| |
| static struct ocfs2_stack_operations ocfs2_user_plugin_ops = { |
| .connect = user_cluster_connect, |
| .disconnect = user_cluster_disconnect, |
| .this_node = user_cluster_this_node, |
| .dlm_lock = user_dlm_lock, |
| .dlm_unlock = user_dlm_unlock, |
| .lock_status = user_dlm_lock_status, |
| .lock_lvb = user_dlm_lvb, |
| .dump_lksb = user_dlm_dump_lksb, |
| }; |
| |
| static struct ocfs2_stack_plugin ocfs2_user_plugin = { |
| .sp_name = "user", |
| .sp_ops = &ocfs2_user_plugin_ops, |
| .sp_owner = THIS_MODULE, |
| }; |
| |
| |
| static int __init ocfs2_user_plugin_init(void) |
| { |
| int rc; |
| |
| rc = ocfs2_control_init(); |
| if (!rc) { |
| rc = ocfs2_stack_glue_register(&ocfs2_user_plugin); |
| if (rc) |
| ocfs2_control_exit(); |
| } |
| |
| return rc; |
| } |
| |
| static void __exit ocfs2_user_plugin_exit(void) |
| { |
| ocfs2_stack_glue_unregister(&ocfs2_user_plugin); |
| ocfs2_control_exit(); |
| } |
| |
| MODULE_AUTHOR("Oracle"); |
| MODULE_DESCRIPTION("ocfs2 driver for userspace cluster stacks"); |
| MODULE_LICENSE("GPL"); |
| module_init(ocfs2_user_plugin_init); |
| module_exit(ocfs2_user_plugin_exit); |