| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| |
| #include "mt76x0.h" |
| #include "mcu.h" |
| #include "../mt76x02_usb.h" |
| |
| static struct usb_device_id mt76x0_device_table[] = { |
| { USB_DEVICE(0x148F, 0x7610) }, /* MT7610U */ |
| { USB_DEVICE(0x13B1, 0x003E) }, /* Linksys AE6000 */ |
| { USB_DEVICE(0x0E8D, 0x7610) }, /* Sabrent NTWLAC */ |
| { USB_DEVICE(0x7392, 0xa711) }, /* Edimax 7711mac */ |
| { USB_DEVICE(0x7392, 0xb711) }, /* Edimax / Elecom */ |
| { USB_DEVICE(0x148f, 0x761a) }, /* TP-Link TL-WDN5200 */ |
| { USB_DEVICE(0x148f, 0x760a) }, /* TP-Link unknown */ |
| { USB_DEVICE(0x0b05, 0x17d1) }, /* Asus USB-AC51 */ |
| { USB_DEVICE(0x0b05, 0x17db) }, /* Asus USB-AC50 */ |
| { USB_DEVICE(0x0df6, 0x0075) }, /* Sitecom WLA-3100 */ |
| { USB_DEVICE(0x2019, 0xab31) }, /* Planex GW-450D */ |
| { USB_DEVICE(0x2001, 0x3d02) }, /* D-LINK DWA-171 rev B1 */ |
| { USB_DEVICE(0x0586, 0x3425) }, /* Zyxel NWD6505 */ |
| { USB_DEVICE(0x07b8, 0x7610) }, /* AboCom AU7212 */ |
| { USB_DEVICE(0x04bb, 0x0951) }, /* I-O DATA WN-AC433UK */ |
| { USB_DEVICE(0x057c, 0x8502) }, /* AVM FRITZ!WLAN USB Stick AC 430 */ |
| { USB_DEVICE(0x293c, 0x5702) }, /* Comcast Xfinity KXW02AAA */ |
| { USB_DEVICE(0x20f4, 0x806b) }, /* TRENDnet TEW-806UBH */ |
| { USB_DEVICE(0x7392, 0xc711) }, /* Devolo Wifi ac Stick */ |
| { USB_DEVICE(0x0df6, 0x0079) }, /* Sitecom Europe B.V. ac Stick */ |
| { USB_DEVICE(0x2357, 0x0123) }, /* TP-LINK T2UHP_US_v1 */ |
| { USB_DEVICE(0x2357, 0x010b) }, /* TP-LINK T2UHP_UN_v1 */ |
| /* TP-LINK Archer T1U */ |
| { USB_DEVICE(0x2357, 0x0105), .driver_info = 1, }, |
| /* MT7630U */ |
| { USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7630, 0xff, 0x2, 0xff)}, |
| /* MT7650U */ |
| { USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7650, 0xff, 0x2, 0xff)}, |
| { 0, } |
| }; |
| |
| static void mt76x0_init_usb_dma(struct mt76x02_dev *dev) |
| { |
| u32 val; |
| |
| val = mt76_rr(dev, MT_USB_DMA_CFG); |
| |
| val |= MT_USB_DMA_CFG_RX_BULK_EN | |
| MT_USB_DMA_CFG_TX_BULK_EN; |
| |
| /* disable AGGR_BULK_RX in order to receive one |
| * frame in each rx urb and avoid copies |
| */ |
| val &= ~MT_USB_DMA_CFG_RX_BULK_AGG_EN; |
| mt76_wr(dev, MT_USB_DMA_CFG, val); |
| |
| val = mt76_rr(dev, MT_COM_REG0); |
| if (val & 1) |
| dev_dbg(dev->mt76.dev, "MCU not ready\n"); |
| |
| val = mt76_rr(dev, MT_USB_DMA_CFG); |
| |
| val |= MT_USB_DMA_CFG_RX_DROP_OR_PAD; |
| mt76_wr(dev, MT_USB_DMA_CFG, val); |
| val &= ~MT_USB_DMA_CFG_RX_DROP_OR_PAD; |
| mt76_wr(dev, MT_USB_DMA_CFG, val); |
| } |
| |
| static void mt76x0u_cleanup(struct mt76x02_dev *dev) |
| { |
| clear_bit(MT76_STATE_INITIALIZED, &dev->mphy.state); |
| mt76x0_chip_onoff(dev, false, false); |
| mt76u_queues_deinit(&dev->mt76); |
| } |
| |
| static void mt76x0u_stop(struct ieee80211_hw *hw) |
| { |
| struct mt76x02_dev *dev = hw->priv; |
| |
| clear_bit(MT76_STATE_RUNNING, &dev->mphy.state); |
| cancel_delayed_work_sync(&dev->cal_work); |
| cancel_delayed_work_sync(&dev->mphy.mac_work); |
| mt76u_stop_tx(&dev->mt76); |
| mt76x02u_exit_beacon_config(dev); |
| |
| if (test_bit(MT76_REMOVED, &dev->mphy.state)) |
| return; |
| |
| if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000)) |
| dev_warn(dev->mt76.dev, "TX DMA did not stop\n"); |
| |
| mt76x0_mac_stop(dev); |
| |
| if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000)) |
| dev_warn(dev->mt76.dev, "RX DMA did not stop\n"); |
| } |
| |
| static int mt76x0u_start(struct ieee80211_hw *hw) |
| { |
| struct mt76x02_dev *dev = hw->priv; |
| int ret; |
| |
| ret = mt76x02u_mac_start(dev); |
| if (ret) |
| return ret; |
| |
| mt76x0_phy_calibrate(dev, true); |
| ieee80211_queue_delayed_work(dev->mt76.hw, &dev->mphy.mac_work, |
| MT_MAC_WORK_INTERVAL); |
| ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work, |
| MT_CALIBRATE_INTERVAL); |
| set_bit(MT76_STATE_RUNNING, &dev->mphy.state); |
| return 0; |
| } |
| |
| static const struct ieee80211_ops mt76x0u_ops = { |
| .tx = mt76x02_tx, |
| .start = mt76x0u_start, |
| .stop = mt76x0u_stop, |
| .add_interface = mt76x02_add_interface, |
| .remove_interface = mt76x02_remove_interface, |
| .config = mt76x0_config, |
| .configure_filter = mt76x02_configure_filter, |
| .bss_info_changed = mt76x02_bss_info_changed, |
| .sta_state = mt76_sta_state, |
| .sta_pre_rcu_remove = mt76_sta_pre_rcu_remove, |
| .set_key = mt76x02_set_key, |
| .conf_tx = mt76x02_conf_tx, |
| .sw_scan_start = mt76_sw_scan, |
| .sw_scan_complete = mt76x02_sw_scan_complete, |
| .ampdu_action = mt76x02_ampdu_action, |
| .sta_rate_tbl_update = mt76x02_sta_rate_tbl_update, |
| .set_rts_threshold = mt76x02_set_rts_threshold, |
| .wake_tx_queue = mt76_wake_tx_queue, |
| .get_txpower = mt76_get_txpower, |
| .get_survey = mt76_get_survey, |
| .set_tim = mt76_set_tim, |
| .release_buffered_frames = mt76_release_buffered_frames, |
| .get_antenna = mt76_get_antenna, |
| }; |
| |
| static int mt76x0u_init_hardware(struct mt76x02_dev *dev, bool reset) |
| { |
| int err; |
| |
| mt76x0_chip_onoff(dev, true, reset); |
| |
| if (!mt76x02_wait_for_mac(&dev->mt76)) |
| return -ETIMEDOUT; |
| |
| err = mt76x0u_mcu_init(dev); |
| if (err < 0) |
| return err; |
| |
| mt76x0_init_usb_dma(dev); |
| err = mt76x0_init_hardware(dev); |
| if (err < 0) |
| return err; |
| |
| mt76x02u_init_beacon_config(dev); |
| |
| mt76_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e); |
| mt76_wr(dev, MT_TXOP_CTRL_CFG, |
| FIELD_PREP(MT_TXOP_TRUN_EN, 0x3f) | |
| FIELD_PREP(MT_TXOP_EXT_CCA_DLY, 0x58)); |
| |
| return 0; |
| } |
| |
| static int mt76x0u_register_device(struct mt76x02_dev *dev) |
| { |
| struct ieee80211_hw *hw = dev->mt76.hw; |
| struct mt76_usb *usb = &dev->mt76.usb; |
| int err; |
| |
| usb->mcu.data = devm_kmalloc(dev->mt76.dev, MCU_RESP_URB_SIZE, |
| GFP_KERNEL); |
| if (!usb->mcu.data) |
| return -ENOMEM; |
| |
| err = mt76u_alloc_queues(&dev->mt76); |
| if (err < 0) |
| goto out_err; |
| |
| err = mt76x0u_init_hardware(dev, true); |
| if (err < 0) |
| goto out_err; |
| |
| /* check hw sg support in order to enable AMSDU */ |
| hw->max_tx_fragments = dev->mt76.usb.sg_en ? MT_TX_SG_MAX_SIZE : 1; |
| err = mt76x0_register_device(dev); |
| if (err < 0) |
| goto out_err; |
| |
| set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state); |
| |
| return 0; |
| |
| out_err: |
| mt76x0u_cleanup(dev); |
| return err; |
| } |
| |
| static int mt76x0u_probe(struct usb_interface *usb_intf, |
| const struct usb_device_id *id) |
| { |
| static const struct mt76_driver_ops drv_ops = { |
| .drv_flags = MT_DRV_SW_RX_AIRTIME, |
| .survey_flags = SURVEY_INFO_TIME_TX, |
| .update_survey = mt76x02_update_channel, |
| .tx_prepare_skb = mt76x02u_tx_prepare_skb, |
| .tx_complete_skb = mt76x02u_tx_complete_skb, |
| .tx_status_data = mt76x02_tx_status_data, |
| .rx_skb = mt76x02_queue_rx_skb, |
| .sta_ps = mt76x02_sta_ps, |
| .sta_add = mt76x02_sta_add, |
| .sta_remove = mt76x02_sta_remove, |
| }; |
| struct usb_device *usb_dev = interface_to_usbdev(usb_intf); |
| struct mt76x02_dev *dev; |
| struct mt76_dev *mdev; |
| u32 mac_rev; |
| int ret; |
| |
| mdev = mt76_alloc_device(&usb_intf->dev, sizeof(*dev), &mt76x0u_ops, |
| &drv_ops); |
| if (!mdev) |
| return -ENOMEM; |
| |
| dev = container_of(mdev, struct mt76x02_dev, mt76); |
| mutex_init(&dev->phy_mutex); |
| |
| /* Quirk for Archer T1U */ |
| if (id->driver_info) |
| dev->no_2ghz = true; |
| |
| usb_dev = usb_get_dev(usb_dev); |
| usb_reset_device(usb_dev); |
| |
| usb_set_intfdata(usb_intf, dev); |
| |
| mt76x02u_init_mcu(mdev); |
| ret = mt76u_init(mdev, usb_intf, false); |
| if (ret) |
| goto err; |
| |
| /* Disable the HW, otherwise MCU fail to initialize on hot reboot */ |
| mt76x0_chip_onoff(dev, false, false); |
| |
| if (!mt76x02_wait_for_mac(mdev)) { |
| ret = -ETIMEDOUT; |
| goto err; |
| } |
| |
| mdev->rev = mt76_rr(dev, MT_ASIC_VERSION); |
| mac_rev = mt76_rr(dev, MT_MAC_CSR0); |
| dev_info(mdev->dev, "ASIC revision: %08x MAC revision: %08x\n", |
| mdev->rev, mac_rev); |
| if (!is_mt76x0(dev)) { |
| ret = -ENODEV; |
| goto err; |
| } |
| |
| /* Note: vendor driver skips this check for MT76X0U */ |
| if (!(mt76_rr(dev, MT_EFUSE_CTRL) & MT_EFUSE_CTRL_SEL)) |
| dev_warn(mdev->dev, "Warning: eFUSE not present\n"); |
| |
| ret = mt76x0u_register_device(dev); |
| if (ret < 0) |
| goto err; |
| |
| return 0; |
| |
| err: |
| usb_set_intfdata(usb_intf, NULL); |
| usb_put_dev(interface_to_usbdev(usb_intf)); |
| mt76u_queues_deinit(&dev->mt76); |
| mt76_free_device(&dev->mt76); |
| |
| return ret; |
| } |
| |
| static void mt76x0_disconnect(struct usb_interface *usb_intf) |
| { |
| struct mt76x02_dev *dev = usb_get_intfdata(usb_intf); |
| bool initialized = test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state); |
| |
| if (!initialized) |
| return; |
| |
| ieee80211_unregister_hw(dev->mt76.hw); |
| mt76x0u_cleanup(dev); |
| |
| usb_set_intfdata(usb_intf, NULL); |
| usb_put_dev(interface_to_usbdev(usb_intf)); |
| |
| mt76_free_device(&dev->mt76); |
| } |
| |
| static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf, |
| pm_message_t state) |
| { |
| struct mt76x02_dev *dev = usb_get_intfdata(usb_intf); |
| |
| mt76u_stop_rx(&dev->mt76); |
| clear_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state); |
| mt76x0_chip_onoff(dev, false, false); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf) |
| { |
| struct mt76x02_dev *dev = usb_get_intfdata(usb_intf); |
| int ret; |
| |
| ret = mt76u_resume_rx(&dev->mt76); |
| if (ret < 0) |
| goto err; |
| |
| ret = mt76x0u_init_hardware(dev, false); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| mt76x0u_cleanup(dev); |
| return ret; |
| } |
| |
| MODULE_DEVICE_TABLE(usb, mt76x0_device_table); |
| MODULE_FIRMWARE(MT7610E_FIRMWARE); |
| MODULE_FIRMWARE(MT7610U_FIRMWARE); |
| MODULE_LICENSE("GPL"); |
| |
| static struct usb_driver mt76x0_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = mt76x0_device_table, |
| .probe = mt76x0u_probe, |
| .disconnect = mt76x0_disconnect, |
| .suspend = mt76x0_suspend, |
| .resume = mt76x0_resume, |
| .reset_resume = mt76x0_resume, |
| .soft_unbind = 1, |
| .disable_hub_initiated_lpm = 1, |
| }; |
| module_usb_driver(mt76x0_driver); |