| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * This file contains the CPU initialization code. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| |
| #include "hardware.h" |
| #include "common.h" |
| |
| static int mx5_cpu_rev = -1; |
| |
| #define IIM_SREV 0x24 |
| |
| static u32 imx5_read_srev_reg(const char *compat) |
| { |
| void __iomem *iim_base; |
| struct device_node *np; |
| u32 srev; |
| |
| np = of_find_compatible_node(NULL, NULL, compat); |
| iim_base = of_iomap(np, 0); |
| WARN_ON(!iim_base); |
| |
| srev = readl(iim_base + IIM_SREV) & 0xff; |
| |
| iounmap(iim_base); |
| |
| return srev; |
| } |
| |
| static int get_mx51_srev(void) |
| { |
| u32 rev = imx5_read_srev_reg("fsl,imx51-iim"); |
| |
| switch (rev) { |
| case 0x0: |
| return IMX_CHIP_REVISION_2_0; |
| case 0x10: |
| return IMX_CHIP_REVISION_3_0; |
| default: |
| return IMX_CHIP_REVISION_UNKNOWN; |
| } |
| } |
| |
| /* |
| * Returns: |
| * the silicon revision of the cpu |
| */ |
| int mx51_revision(void) |
| { |
| if (mx5_cpu_rev == -1) |
| mx5_cpu_rev = get_mx51_srev(); |
| |
| return mx5_cpu_rev; |
| } |
| EXPORT_SYMBOL(mx51_revision); |
| |
| #ifdef CONFIG_NEON |
| |
| /* |
| * All versions of the silicon before Rev. 3 have broken NEON implementations. |
| * Dependent on link order - so the assumption is that vfp_init is called |
| * before us. |
| */ |
| int __init mx51_neon_fixup(void) |
| { |
| if (mx51_revision() < IMX_CHIP_REVISION_3_0 && |
| (elf_hwcap & HWCAP_NEON)) { |
| elf_hwcap &= ~HWCAP_NEON; |
| pr_info("Turning off NEON support, detected broken NEON implementation\n"); |
| } |
| return 0; |
| } |
| |
| #endif |
| |
| static int get_mx53_srev(void) |
| { |
| u32 rev = imx5_read_srev_reg("fsl,imx53-iim"); |
| |
| switch (rev) { |
| case 0x0: |
| return IMX_CHIP_REVISION_1_0; |
| case 0x2: |
| return IMX_CHIP_REVISION_2_0; |
| case 0x3: |
| return IMX_CHIP_REVISION_2_1; |
| default: |
| return IMX_CHIP_REVISION_UNKNOWN; |
| } |
| } |
| |
| /* |
| * Returns: |
| * the silicon revision of the cpu |
| */ |
| int mx53_revision(void) |
| { |
| if (mx5_cpu_rev == -1) |
| mx5_cpu_rev = get_mx53_srev(); |
| |
| return mx5_cpu_rev; |
| } |
| EXPORT_SYMBOL(mx53_revision); |
| |
| #define ARM_GPC 0x4 |
| #define DBGEN BIT(16) |
| |
| /* |
| * This enables the DBGEN bit in ARM_GPC register, which is |
| * required for accessing some performance counter features. |
| * Technically it is only required while perf is used, but to |
| * keep the source code simple we just enable it all the time |
| * when the kernel configuration allows using the feature. |
| */ |
| void __init imx5_pmu_init(void) |
| { |
| void __iomem *tigerp_base; |
| struct device_node *np; |
| u32 gpc; |
| |
| if (!IS_ENABLED(CONFIG_ARM_PMU)) |
| return; |
| |
| np = of_find_compatible_node(NULL, NULL, "arm,cortex-a8-pmu"); |
| if (!np) |
| return; |
| |
| if (!of_property_read_bool(np, "secure-reg-access")) |
| goto exit; |
| |
| of_node_put(np); |
| |
| np = of_find_compatible_node(NULL, NULL, "fsl,imx51-tigerp"); |
| if (!np) |
| return; |
| |
| tigerp_base = of_iomap(np, 0); |
| if (!tigerp_base) |
| goto exit; |
| |
| gpc = readl_relaxed(tigerp_base + ARM_GPC); |
| gpc |= DBGEN; |
| writel_relaxed(gpc, tigerp_base + ARM_GPC); |
| iounmap(tigerp_base); |
| exit: |
| of_node_put(np); |
| |
| } |