| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2019-2020 Variscite Ltd. |
| * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org> |
| */ |
| |
| /dts-v1/; |
| |
| #include "imx8mn-var-som.dtsi" |
| |
| / { |
| model = "Variscite VAR-SOM-MX8MN Symphony evaluation board"; |
| compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn"; |
| |
| reg_usdhc2_vmmc: regulator-usdhc2-vmmc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| regulator-name = "VSD_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| back { |
| label = "Back"; |
| gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_BACK>; |
| }; |
| |
| home { |
| label = "Home"; |
| gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_HOME>; |
| }; |
| |
| menu { |
| label = "Menu"; |
| gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_MENU>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led { |
| label = "Heartbeat"; |
| gpios = <&pca9534 0 GPIO_ACTIVE_LOW>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| }; |
| |
| ðphy { |
| reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| pca9534: gpio@20 { |
| compatible = "nxp,pca9534"; |
| reg = <0x20>; |
| gpio-controller; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pca9534>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <7 IRQ_TYPE_EDGE_FALLING>; |
| #gpio-cells = <2>; |
| wakeup-source; |
| |
| /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */ |
| usb3-sata-sel-hog { |
| gpio-hog; |
| gpios = <4 GPIO_ACTIVE_HIGH>; |
| output-low; |
| line-name = "usb3_sata_sel"; |
| }; |
| |
| som-vselect-hog { |
| gpio-hog; |
| gpios = <6 GPIO_ACTIVE_HIGH>; |
| output-low; |
| line-name = "som_vselect"; |
| }; |
| |
| enet-sel-hog { |
| gpio-hog; |
| gpios = <7 GPIO_ACTIVE_HIGH>; |
| output-low; |
| line-name = "enet_sel"; |
| }; |
| }; |
| |
| extcon_usbotg1: typec@3d { |
| compatible = "nxp,ptn5150"; |
| reg = <0x3d>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <11 IRQ_TYPE_LEVEL_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ptn5150>; |
| status = "okay"; |
| }; |
| }; |
| |
| &i2c3 { |
| /* Capacitive touch controller */ |
| ft5x06_ts: touchscreen@38 { |
| compatible = "edt,edt-ft5406"; |
| reg = <0x38>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_captouch>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; |
| |
| touchscreen-size-x = <800>; |
| touchscreen-size-y = <480>; |
| touchscreen-inverted-x; |
| touchscreen-inverted-y; |
| }; |
| |
| rtc@68 { |
| compatible = "dallas,ds1337"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| /* Header */ |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| /* Header */ |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| disable-over-current; |
| extcon = <&extcon_usbotg1>, <&extcon_usbotg1>; |
| }; |
| |
| &pinctrl_fec1 { |
| fsl,pins = < |
| MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 |
| MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f |
| MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f |
| MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f |
| MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f |
| MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f |
| MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f |
| /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ |
| >; |
| }; |
| |
| &pinctrl_fec1_sleep { |
| fsl,pins = < |
| MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x120 |
| MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x120 |
| MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x120 |
| MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x120 |
| MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x120 |
| MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x120 |
| MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x120 |
| MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x120 |
| MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x120 |
| MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x120 |
| MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x120 |
| MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x120 |
| MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x120 |
| MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x120 |
| /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ |
| >; |
| }; |
| |
| &iomuxc { |
| pinctrl_captouch: captouchgrp { |
| fsl,pins = < |
| MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x16 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 |
| MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 |
| >; |
| }; |
| |
| pinctrl_pca9534: pca9534grp { |
| fsl,pins = < |
| MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16 |
| >; |
| }; |
| |
| pinctrl_ptn5150: ptn5150grp { |
| fsl,pins = < |
| MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16 |
| >; |
| }; |
| |
| pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { |
| fsl,pins = < |
| MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x41 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 |
| MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 |
| MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 |
| >; |
| }; |
| }; |