| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, Raffaele Tranquillini <raffaele.tranquillini@gmail.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "msm8996-xiaomi-common.dtsi" |
| #include <dt-bindings/sound/qcom,q6afe.h> |
| #include <dt-bindings/sound/qcom,q6asm.h> |
| #include <dt-bindings/input/ti-drv260x.h> |
| |
| / { |
| model = "Xiaomi Mi 5"; |
| compatible = "xiaomi,gemini", "qcom,msm8996"; |
| chassis-type = "handset"; |
| qcom,msm-id = <246 0x30001>; |
| qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>; |
| qcom,board-id = <31 0>; |
| |
| clocks { |
| divclk2_haptics: divclk2 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "divclk2"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&divclk2_pin_a>; |
| }; |
| }; |
| }; |
| |
| &adsp_pil { |
| firmware-name = "qcom/msm8996/gemini/adsp.mbn"; |
| }; |
| |
| &blsp2_i2c3 { |
| haptics: drv2604@5a { |
| compatible = "ti,drv2604"; |
| reg = <0x5a>; |
| enable-gpio = <&tlmm 93 0x00>; |
| mode = <DRV260X_LRA_MODE>; |
| library-sel = <DRV260X_LIB_LRA>; |
| pinctrl-names = "default","sleep"; |
| pinctrl-0 = <&vibrator_default>; |
| pinctrl-1 = <&vibrator_sleep>; |
| }; |
| |
| lp5562@30 { |
| compatible = "ti,lp5562"; |
| reg = <0x30>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-gpio = <&pm8994_gpios 7 1>; |
| clock-mode = /bits/8 <2>; |
| label = "button-backlight"; |
| |
| led@0 { |
| reg = <0>; |
| chan-name = "button-backlight"; |
| led-cur = /bits/ 8 <0x32>; |
| max-cur = /bits/ 8 <0xC8>; |
| }; |
| |
| led@1 { |
| reg = <0>; |
| chan-name = "button-backlight1"; |
| led-cur = /bits/ 8 <0x32>; |
| max-cur = /bits/ 8 <0xC8>; |
| }; |
| }; |
| }; |
| |
| &blsp2_i2c6 { |
| synaptics@20 { |
| compatible = "syna,rmi4-i2c"; |
| reg = <0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <125 IRQ_TYPE_LEVEL_LOW>; |
| vdda-supply = <&vreg_l6a_1p8>; |
| vdd-supply = <&vdd_3v2_tp>; |
| reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; |
| |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&touchscreen_default>; |
| pinctrl-1 = <&touchscreen_sleep>; |
| }; |
| |
| }; |
| |
| &dsi0 { |
| status = "okay"; |
| |
| vdd-supply = <&vreg_l2a_1p25>; |
| vdda-supply = <&vreg_l19a_3p3>; |
| vddio-supply = <&vreg_l14a_1p8>; |
| |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; |
| pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; |
| |
| panel: panel@0 { |
| compatible = "jdi,fhd-r63452"; |
| reg = <0>; |
| reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; |
| backlight = <&pmi8994_wled>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&dsi0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &dsi0_out { |
| remote-endpoint = <&panel_in>; |
| }; |
| |
| &gpu { |
| zap-shader { |
| firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; |
| }; |
| }; |
| |
| &pmi8994_wled { |
| status = "okay"; |
| }; |
| |
| &q6asmdai { |
| dai@0 { |
| reg = <0>; |
| }; |
| |
| dai@1 { |
| reg = <1>; |
| }; |
| |
| dai@2 { |
| reg = <2>; |
| }; |
| }; |
| |
| &sound { |
| compatible = "qcom,apq8096-sndcard"; |
| model = "gemini"; |
| audio-routing = "RX_BIAS", "MCLK", |
| "MM_DL1", "MultiMedia1 Playback", |
| "MM_DL2", "MultiMedia2 Playback", |
| "MultiMedia3 Capture", "MM_UL3"; |
| |
| mm1-dai-link { |
| link-name = "MultiMedia1"; |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; |
| }; |
| }; |
| |
| mm2-dai-link { |
| link-name = "MultiMedia2"; |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; |
| }; |
| }; |
| |
| mm3-dai-link { |
| link-name = "MultiMedia3"; |
| cpu { |
| sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; |
| }; |
| }; |
| |
| slim-dai-link { |
| link-name = "SLIM Playback"; |
| cpu { |
| sound-dai = <&q6afedai SLIMBUS_6_RX>; |
| }; |
| |
| platform { |
| sound-dai = <&q6routing>; |
| }; |
| |
| codec { |
| sound-dai = <&wcd9335 6>; |
| }; |
| }; |
| |
| slimcap-dai-link { |
| link-name = "SLIM Capture"; |
| cpu { |
| sound-dai = <&q6afedai SLIMBUS_0_TX>; |
| }; |
| |
| platform { |
| sound-dai = <&q6routing>; |
| }; |
| |
| codec { |
| sound-dai = <&wcd9335 1>; |
| }; |
| }; |
| }; |
| |
| &venus { |
| firmware-name = "qcom/msm8996/gemini/venus.mbn"; |
| }; |
| |
| &rpm_requests { |
| pm8994-regulators { |
| vreg_l17a_2p8: l17 { |
| regulator-name = "vreg_l17a_2p8"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| }; |
| vreg_l29a_2p7: l29 { |
| regulator-name = "vreg_l29a_2p7"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| }; |
| }; |
| |
| &pm8994_gpios { |
| gpio-line-names = |
| "NC", /* GPIO_1 */ |
| "VOL_UP_N", /* GPIO_2 */ |
| "SPKR_ID", /* GPIO_3 */ |
| "PWM_HAPTICS", /* GPIO_4 */ |
| "INFARED_DRV", /* GPIO_5 */ |
| "NC", /* GPIO_6 */ |
| "KEYPAD_LED_EN", /* GPIO_7 */ |
| "WL_EN", /* GPIO_8 */ |
| "3P3_ENABLE", /* GPIO_9 */ |
| "FP_ID", /* GPIO_10 */ |
| "NC", /* GPIO_11 */ |
| "NC", /* GPIO_12 */ |
| "NC", /* GPIO_13 */ |
| "NC", /* GPIO_14 */ |
| "DIVCLK1_CDC", /* GPIO_15 */ |
| "DIVCLK2_HAPTICS", /* GPIO_16 */ |
| "NC", /* GPIO_17 */ |
| "32KHz_CLK_IN", /* GPIO_18 */ |
| "BT_EN", /* GPIO_19 */ |
| "PMIC_SLB", /* GPIO_20 */ |
| "UIM_BATT_ALARM", /* GPIO_21 */ |
| "NC"; /* GPIO_22 */ |
| |
| divclk2_pin_a: divclk2 { |
| pins = "gpio16"; |
| function = PMIC_GPIO_FUNC_FUNC2; |
| bias-disable; |
| power-source = <PM8994_GPIO_S4>; |
| }; |
| }; |
| |
| &pm8994_mpps { |
| gpio-line-names = |
| "NC", /* MPP_1 */ |
| "CCI_TIMER1", /* MPP_2 */ |
| "PMIC_SLB", /* MPP_3 */ |
| "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ |
| "NC", /* MPP_5 */ |
| "NC", /* MPP_6 */ |
| "NC", /* MPP_7 */ |
| "NC"; /* MPP_8 */ |
| }; |
| |
| &pmi8994_gpios { |
| gpio-line-names = |
| "NC", /* GPIO_1 */ |
| "SPKR_PA_RST", /* GPIO_2 */ |
| "NC", /* GPIO_3 */ |
| "NC", /* GPIO_4 */ |
| "NC", /* GPIO_5 */ |
| "NC", /* GPIO_6 */ |
| "NC", /* GPIO_7 */ |
| "NC", /* GPIO_8 */ |
| "NC", /* GPIO_9 */ |
| "NC"; /* GPIO_10 */ |
| }; |
| |
| &tlmm { |
| gpio-line-names = |
| "ESE_SPI_MOSI", /* GPIO_0 */ |
| "ESE_SPI_MISO", /* GPIO_1 */ |
| "ERR_INT_N", /* GPIO_2 */ |
| "ESE_SPI_CLK", /* GPIO_3 */ |
| "MSM_UART_TX", /* GPIO_4 */ |
| "MSM_UART_RX", /* GPIO_5 */ |
| "NFC_I2C_SDA", /* GPIO_6 */ |
| "NFC_I2C_SCL", /* GPIO_7 */ |
| "LCD0_RESET_N", /* GPIO_8 */ |
| "NFC_IRQ", /* GPIO_9 */ |
| "LCD_TE", /* GPIO_10 */ |
| "LCD_ID_DET1", /* GPIO_11 */ |
| "NFC_DISABLE", /* GPIO_12 */ |
| "CAM_MCLK0", /* GPIO_13 */ |
| "NC", /* GPIO_14 */ |
| "CAM_MCLK2", /* GPIO_15 */ |
| "ESE_PWR_REQ", /* GPIO_16 */ |
| "CCI_I2C_SDA0", /* GPIO_17 */ |
| "CCI_I2C_SCL0", /* GPIO_18 */ |
| "CCI_I2C_SDA1", /* GPIO_19 */ |
| "CCI_I2C_SCL1", /* GPIO_20 */ |
| "NFC_DWL_REQ", /* GPIO_21 */ |
| "CCI_TIMER1", /* GPIO_22 */ |
| "WEBCAM1_RESET_N", /* GPIO_23 */ |
| "ESE_IRQ", /* GPIO_24 */ |
| "NC", /* GPIO_25 */ |
| "WEBCAM1_STANDBY", /* GPIO_26 */ |
| "NC", /* GPIO_27 */ |
| "NC", /* GPIO_28 */ |
| "NC", /* GPIO_29 */ |
| "CAM1_RST_N", /* GPIO_30 */ |
| "NC", /* GPIO_31 */ |
| "NC", /* GPIO_32 */ |
| "NC", /* GPIO_33 */ |
| "FP_DOME_SW", /* GPIO_34 */ |
| "PCI_E0_RST_N", /* GPIO_35 */ |
| "PCI_E0_CLKREQ_N", /* GPIO_36 */ |
| "PCI_E0_WAKE", /* GPIO_37 */ |
| "FM_INT_N", /* GPIO_38 */ |
| "FM_RESET_N", /* GPIO_39 */ |
| "NC", /* GPIO_40 */ |
| "QCA_UART_TXD", /* GPIO_41 */ |
| "QCA_UART_RXD", /* GPIO_42 */ |
| "QCA_UART_CTS", /* GPIO_43 */ |
| "QCA_UART_RTS", /* GPIO_44 */ |
| "MAWC_UART_TX", /* GPIO_45 */ |
| "MAWC_UART_RX", /* GPIO_46 */ |
| "NC", /* GPIO_47 */ |
| "NC", /* GPIO_48 */ |
| "AUDIO_SWITCH_EN", /* GPIO_49 */ |
| "FP_SPI_RST", /* GPIO_50 */ |
| "TYPEC_I2C_SDA", /* GPIO_51 */ |
| "TYPEC_I2C_SCL", /* GPIO_52 */ |
| "CODEC_INT2_N", /* GPIO_53 */ |
| "CODEC_INT1_N", /* GPIO_54 */ |
| "APPS_I2C7_SDA", /* GPIO_55 */ |
| "APPS_I2C7_SCL", /* GPIO_56 */ |
| "FORCE_USB_BOOT", /* GPIO_57 */ |
| "SPKR_I2S_BCK", /* GPIO_58 */ |
| "SPKR_I2S_WS", /* GPIO_59 */ |
| "SPKR_I2S_DOUT", /* GPIO_60 */ |
| "SPKR_I2S_DIN", /* GPIO_61 */ |
| "ESE_RSTN", /* GPIO_62 */ |
| "TYPEC_INT", /* GPIO_63 */ |
| "CODEC_RESET_N", /* GPIO_64 */ |
| "PCM_CLK", /* GPIO_65 */ |
| "PCM_SYNC", /* GPIO_66 */ |
| "PCM_DIN", /* GPIO_67 */ |
| "PCM_DOUT", /* GPIO_68 */ |
| "HIFI_CLK", /* GPIO_69 */ |
| "SLIMBUS_CLK", /* GPIO_70 */ |
| "SLIMBUS_DATA0", /* GPIO_71 */ |
| "SLIMBUS_DATA1", /* GPIO_72 */ |
| "LDO_5V_IN_EN", /* GPIO_73 */ |
| "NC", /* GPIO_74 */ |
| "FM_I2S_CLK", /* GPIO_75 */ |
| "FM_I2S_SYNC", /* GPIO_76 */ |
| "FM_I2S_DATA", /* GPIO_77 */ |
| "FM_STATUS", /* GPIO_78 */ |
| "NC", /* GPIO_79 */ |
| "SENSOR_RESET_N", /* GPIO_80 */ |
| "FP_SPI_MOSI", /* GPIO_81 */ |
| "FP_SPI_MISO", /* GPIO_82 */ |
| "FP_SPI_CS_N", /* GPIO_83 */ |
| "FP_SPI_CLK", /* GPIO_84 */ |
| "NC", /* GPIO_85 */ |
| "CAM_VDD_1P05_EN", /* GPIO_86 */ |
| "MSM_TS_I2C_SDA", /* GPIO_87 */ |
| "MSM_TS_I2C_SCL", /* GPIO_88 */ |
| "TS_RESOUT_N", /* GPIO_89 */ |
| "ESE_SPI_CS_N", /* GPIO_90 */ |
| "NC", /* GPIO_91 */ |
| "NC", /* GPIO_92 */ |
| "HAPTICS_EN", /* GPIO_93 */ |
| "NC", /* GPIO_94 */ |
| "NC", /* GPIO_95 */ |
| "NC", /* GPIO_96 */ |
| "NC", /* GPIO_97 */ |
| "GRFC_1", /* GPIO_98 */ |
| "NC", /* GPIO_99 */ |
| "GRFC_3", /* GPIO_100 */ |
| "GRFC_4", /* GPIO_101 */ |
| "NC", /* GPIO_102 */ |
| "NC", /* GPIO_103 */ |
| "GRFC_7", /* GPIO_104 */ |
| "UIM2_DATA", /* GPIO_105 */ |
| "UIM2_CLK", /* GPIO_106 */ |
| "UIM2_RESET", /* GPIO_107 */ |
| "UIM2_PRESENT", /* GPIO_108 */ |
| "UIM1_DATA", /* GPIO_109 */ |
| "UIM1_CLK", /* GPIO_110 */ |
| "UIM1_RESET", /* GPIO_111 */ |
| "UIM1_PRESENT", /* GPIO_112 */ |
| "UIM_BATT_ALARM", /* GPIO_113 */ |
| "GRFC_8", /* GPIO_114 */ |
| "GRFC_9", /* GPIO_115 */ |
| "TX_GTR_THRES", /* GPIO_116 */ |
| "ACCEL_INT", /* GPIO_117 */ |
| "GYRO_INT", /* GPIO_118 */ |
| "COMPASS_INT", /* GPIO_119 */ |
| "PROXIMITY_INT_N", /* GPIO_120 */ |
| "FP_IRQ", /* GPIO_121 */ |
| "NC", /* GPIO_122 */ |
| "HALL_INTR2", /* GPIO_123 */ |
| "HALL_INTR1", /* GPIO_124 */ |
| "TS_INT_N", /* GPIO_125 */ |
| "NC", /* GPIO_126 */ |
| "GRFC_11", /* GPIO_127 */ |
| "NC", /* GPIO_128 */ |
| "EXT_GPS_LNA_EN", /* GPIO_129 */ |
| "NC", /* GPIO_130 */ |
| "NC", /* GPIO_131 */ |
| "NC", /* GPIO_132 */ |
| "GRFC_14", /* GPIO_133 */ |
| "GSM_TX2_PHASE_D", /* GPIO_134 */ |
| "NC", /* GPIO_135 */ |
| "NC", /* GPIO_136 */ |
| "RFFE3_DATA", /* GPIO_137 */ |
| "RFFE3_CLK", /* GPIO_138 */ |
| "NC", /* GPIO_139 */ |
| "NC", /* GPIO_140 */ |
| "RFFE5_DATA", /* GPIO_141 */ |
| "RFFE5_CLK", /* GPIO_142 */ |
| "NC", /* GPIO_143 */ |
| "COEX_UART_TX", /* GPIO_144 */ |
| "COEX_UART_RX", /* GPIO_145 */ |
| "RFFE2_DATA", /* GPIO_146 */ |
| "RFFE2_CLK", /* GPIO_147 */ |
| "RFFE1_DATA", /* GPIO_148 */ |
| "RFFE1_CLK"; /* GPIO_149 */ |
| |
| touchscreen_default: touchscreen_default { |
| pins = "gpio89", "gpio125"; |
| function = "gpio"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| |
| touchscreen_sleep: touchscreen_sleep { |
| pins = "gpio89", "gpio125"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| vibrator_default: vibrator_default { |
| pins = "gpio93"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-pull-up; |
| }; |
| |
| vibrator_sleep: vibrator_sleep { |
| pins = "gpio93"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
