| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> |
| * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/platform_device.h> |
| #include <linux/ssb/ssb.h> |
| #include <asm/addrspace.h> |
| #include <bcm63xx_board.h> |
| #include <bcm63xx_cpu.h> |
| #include <bcm63xx_dev_uart.h> |
| #include <bcm63xx_regs.h> |
| #include <bcm63xx_io.h> |
| #include <bcm63xx_nvram.h> |
| #include <bcm63xx_dev_pci.h> |
| #include <bcm63xx_dev_enet.h> |
| #include <bcm63xx_dev_flash.h> |
| #include <bcm63xx_dev_hsspi.h> |
| #include <bcm63xx_dev_pcmcia.h> |
| #include <bcm63xx_dev_spi.h> |
| #include <bcm63xx_dev_usb_usbd.h> |
| #include <board_bcm963xx.h> |
| |
| #include <uapi/linux/bcm933xx_hcs.h> |
| |
| #define HCS_OFFSET_128K 0x20000 |
| |
| static struct board_info board; |
| |
| /* |
| * known 3368 boards |
| */ |
| #ifdef CONFIG_BCM63XX_CPU_3368 |
| static struct board_info __initdata board_cvg834g = { |
| .name = "CVG834G_E15R3921", |
| .expected_cpu_id = 0x3368, |
| |
| .ephy_reset_gpio = 36, |
| .ephy_reset_gpio_flags = GPIOF_INIT_HIGH, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| .has_uart1 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .leds = { |
| { |
| .name = "CVG834G:green:power", |
| .gpio = 37, |
| .default_trigger= "default-on", |
| }, |
| }, |
| }; |
| #endif /* CONFIG_BCM63XX_CPU_3368 */ |
| |
| /* |
| * known 6328 boards |
| */ |
| #ifdef CONFIG_BCM63XX_CPU_6328 |
| static struct board_info __initdata board_96328avng = { |
| .name = "96328avng", |
| .expected_cpu_id = 0x6328, |
| |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_usbd = 0, |
| .usbd = { |
| .use_fullspeed = 0, |
| .port_no = 0, |
| }, |
| |
| .leds = { |
| { |
| .name = "96328avng::ppp-fail", |
| .gpio = 2, |
| .active_low = 1, |
| }, |
| { |
| .name = "96328avng::power", |
| .gpio = 4, |
| .active_low = 1, |
| .default_trigger = "default-on", |
| }, |
| { |
| .name = "96328avng::power-fail", |
| .gpio = 8, |
| .active_low = 1, |
| }, |
| { |
| .name = "96328avng::wps", |
| .gpio = 9, |
| .active_low = 1, |
| }, |
| { |
| .name = "96328avng::ppp", |
| .gpio = 11, |
| .active_low = 1, |
| }, |
| }, |
| }; |
| #endif /* CONFIG_BCM63XX_CPU_6328 */ |
| |
| /* |
| * known 6338 boards |
| */ |
| #ifdef CONFIG_BCM63XX_CPU_6338 |
| static struct board_info __initdata board_96338gw = { |
| .name = "96338GW", |
| .expected_cpu_id = 0x6338, |
| |
| .has_ohci0 = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| |
| .leds = { |
| { |
| .name = "adsl", |
| .gpio = 3, |
| .active_low = 1, |
| }, |
| { |
| .name = "ses", |
| .gpio = 5, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp-fail", |
| .gpio = 4, |
| .active_low = 1, |
| }, |
| { |
| .name = "power", |
| .gpio = 0, |
| .active_low = 1, |
| .default_trigger = "default-on", |
| }, |
| { |
| .name = "stop", |
| .gpio = 1, |
| .active_low = 1, |
| } |
| }, |
| }; |
| |
| static struct board_info __initdata board_96338w = { |
| .name = "96338W", |
| .expected_cpu_id = 0x6338, |
| |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| |
| .leds = { |
| { |
| .name = "adsl", |
| .gpio = 3, |
| .active_low = 1, |
| }, |
| { |
| .name = "ses", |
| .gpio = 5, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp-fail", |
| .gpio = 4, |
| .active_low = 1, |
| }, |
| { |
| .name = "power", |
| .gpio = 0, |
| .active_low = 1, |
| .default_trigger = "default-on", |
| }, |
| { |
| .name = "stop", |
| .gpio = 1, |
| .active_low = 1, |
| }, |
| }, |
| }; |
| #endif /* CONFIG_BCM63XX_CPU_6338 */ |
| |
| /* |
| * known 6345 boards |
| */ |
| #ifdef CONFIG_BCM63XX_CPU_6345 |
| static struct board_info __initdata board_96345gw2 = { |
| .name = "96345GW2", |
| .expected_cpu_id = 0x6345, |
| |
| .has_uart0 = 1, |
| }; |
| #endif /* CONFIG_BCM63XX_CPU_6345 */ |
| |
| /* |
| * known 6348 boards |
| */ |
| #ifdef CONFIG_BCM63XX_CPU_6348 |
| static struct board_info __initdata board_96348r = { |
| .name = "96348R", |
| .expected_cpu_id = 0x6348, |
| |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .leds = { |
| { |
| .name = "adsl-fail", |
| .gpio = 2, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp", |
| .gpio = 3, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp-fail", |
| .gpio = 4, |
| .active_low = 1, |
| }, |
| { |
| .name = "power", |
| .gpio = 0, |
| .active_low = 1, |
| .default_trigger = "default-on", |
| |
| }, |
| { |
| .name = "stop", |
| .gpio = 1, |
| .active_low = 1, |
| }, |
| }, |
| }; |
| |
| static struct board_info __initdata board_96348gw_10 = { |
| .name = "96348GW-10", |
| .expected_cpu_id = 0x6348, |
| |
| .has_ohci0 = 1, |
| .has_pccard = 1, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| |
| .leds = { |
| { |
| .name = "adsl-fail", |
| .gpio = 2, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp", |
| .gpio = 3, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp-fail", |
| .gpio = 4, |
| .active_low = 1, |
| }, |
| { |
| .name = "power", |
| .gpio = 0, |
| .active_low = 1, |
| .default_trigger = "default-on", |
| }, |
| { |
| .name = "stop", |
| .gpio = 1, |
| .active_low = 1, |
| }, |
| }, |
| }; |
| |
| static struct board_info __initdata board_96348gw_11 = { |
| .name = "96348GW-11", |
| .expected_cpu_id = 0x6348, |
| |
| .has_ohci0 = 1, |
| .has_pccard = 1, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| |
| .leds = { |
| { |
| .name = "adsl-fail", |
| .gpio = 2, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp", |
| .gpio = 3, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp-fail", |
| .gpio = 4, |
| .active_low = 1, |
| }, |
| { |
| .name = "power", |
| .gpio = 0, |
| .active_low = 1, |
| .default_trigger = "default-on", |
| }, |
| { |
| .name = "stop", |
| .gpio = 1, |
| .active_low = 1, |
| }, |
| }, |
| }; |
| |
| static struct board_info __initdata board_96348gw = { |
| .name = "96348GW", |
| .expected_cpu_id = 0x6348, |
| |
| .has_ohci0 = 1, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| |
| .leds = { |
| { |
| .name = "adsl-fail", |
| .gpio = 2, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp", |
| .gpio = 3, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp-fail", |
| .gpio = 4, |
| .active_low = 1, |
| }, |
| { |
| .name = "power", |
| .gpio = 0, |
| .active_low = 1, |
| .default_trigger = "default-on", |
| }, |
| { |
| .name = "stop", |
| .gpio = 1, |
| .active_low = 1, |
| }, |
| }, |
| }; |
| |
| static struct board_info __initdata board_FAST2404 = { |
| .name = "F@ST2404", |
| .expected_cpu_id = 0x6348, |
| |
| .has_ohci0 = 1, |
| .has_pccard = 1, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| }; |
| |
| static struct board_info __initdata board_rta1025w_16 = { |
| .name = "RTA1025W_16", |
| .expected_cpu_id = 0x6348, |
| |
| .has_pci = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| }; |
| |
| static struct board_info __initdata board_DV201AMR = { |
| .name = "DV201AMR", |
| .expected_cpu_id = 0x6348, |
| |
| .has_ohci0 = 1, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| }; |
| |
| static struct board_info __initdata board_96348gw_a = { |
| .name = "96348GW-A", |
| .expected_cpu_id = 0x6348, |
| |
| .has_ohci0 = 1, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| }; |
| #endif /* CONFIG_BCM63XX_CPU_6348 */ |
| |
| /* |
| * known 6358 boards |
| */ |
| #ifdef CONFIG_BCM63XX_CPU_6358 |
| static struct board_info __initdata board_96358vw = { |
| .name = "96358VW", |
| .expected_cpu_id = 0x6358, |
| |
| .has_ehci0 = 1, |
| .has_ohci0 = 1, |
| .has_pccard = 1, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| |
| .leds = { |
| { |
| .name = "adsl-fail", |
| .gpio = 15, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp", |
| .gpio = 22, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp-fail", |
| .gpio = 23, |
| .active_low = 1, |
| }, |
| { |
| .name = "power", |
| .gpio = 4, |
| .default_trigger = "default-on", |
| }, |
| { |
| .name = "stop", |
| .gpio = 5, |
| }, |
| }, |
| }; |
| |
| static struct board_info __initdata board_96358vw2 = { |
| .name = "96358VW2", |
| .expected_cpu_id = 0x6358, |
| |
| .has_ehci0 = 1, |
| .has_ohci0 = 1, |
| .has_pccard = 1, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| |
| .leds = { |
| { |
| .name = "adsl", |
| .gpio = 22, |
| .active_low = 1, |
| }, |
| { |
| .name = "ppp-fail", |
| .gpio = 23, |
| }, |
| { |
| .name = "power", |
| .gpio = 5, |
| .active_low = 1, |
| .default_trigger = "default-on", |
| }, |
| { |
| .name = "stop", |
| .gpio = 4, |
| .active_low = 1, |
| }, |
| }, |
| }; |
| |
| static struct board_info __initdata board_AGPFS0 = { |
| .name = "AGPF-S0", |
| .expected_cpu_id = 0x6358, |
| |
| .has_ehci0 = 1, |
| .has_ohci0 = 1, |
| .has_pci = 1, |
| .has_uart0 = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| }; |
| |
| static struct board_info __initdata board_DWVS0 = { |
| .name = "DWV-S0", |
| .expected_cpu_id = 0x6358, |
| |
| .has_ehci0 = 1, |
| .has_ohci0 = 1, |
| .has_pci = 1, |
| |
| .has_enet0 = 1, |
| .enet0 = { |
| .has_phy = 1, |
| .use_internal_phy = 1, |
| }, |
| |
| .has_enet1 = 1, |
| .enet1 = { |
| .force_speed_100 = 1, |
| .force_duplex_full = 1, |
| }, |
| }; |
| #endif /* CONFIG_BCM63XX_CPU_6358 */ |
| |
| /* |
| * all boards |
| */ |
| static const struct board_info __initconst *bcm963xx_boards[] = { |
| #ifdef CONFIG_BCM63XX_CPU_3368 |
| &board_cvg834g, |
| #endif /* CONFIG_BCM63XX_CPU_3368 */ |
| #ifdef CONFIG_BCM63XX_CPU_6328 |
| &board_96328avng, |
| #endif /* CONFIG_BCM63XX_CPU_6328 */ |
| #ifdef CONFIG_BCM63XX_CPU_6338 |
| &board_96338gw, |
| &board_96338w, |
| #endif /* CONFIG_BCM63XX_CPU_6338 */ |
| #ifdef CONFIG_BCM63XX_CPU_6345 |
| &board_96345gw2, |
| #endif /* CONFIG_BCM63XX_CPU_6345 */ |
| #ifdef CONFIG_BCM63XX_CPU_6348 |
| &board_96348r, |
| &board_96348gw, |
| &board_96348gw_10, |
| &board_96348gw_11, |
| &board_FAST2404, |
| &board_DV201AMR, |
| &board_96348gw_a, |
| &board_rta1025w_16, |
| #endif /* CONFIG_BCM63XX_CPU_6348 */ |
| #ifdef CONFIG_BCM63XX_CPU_6358 |
| &board_96358vw, |
| &board_96358vw2, |
| &board_AGPFS0, |
| &board_DWVS0, |
| #endif /* CONFIG_BCM63XX_CPU_6358 */ |
| }; |
| |
| /* |
| * Register a sane SPROMv2 to make the on-board |
| * bcm4318 WLAN work |
| */ |
| #ifdef CONFIG_SSB_PCIHOST |
| static struct ssb_sprom bcm63xx_sprom = { |
| .revision = 0x02, |
| .board_rev = 0x17, |
| .country_code = 0x0, |
| .ant_available_bg = 0x3, |
| .pa0b0 = 0x15ae, |
| .pa0b1 = 0xfa85, |
| .pa0b2 = 0xfe8d, |
| .pa1b0 = 0xffff, |
| .pa1b1 = 0xffff, |
| .pa1b2 = 0xffff, |
| .gpio0 = 0xff, |
| .gpio1 = 0xff, |
| .gpio2 = 0xff, |
| .gpio3 = 0xff, |
| .maxpwr_bg = 0x004c, |
| .itssi_bg = 0x00, |
| .boardflags_lo = 0x2848, |
| .boardflags_hi = 0x0000, |
| }; |
| |
| int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) |
| { |
| if (bus->bustype == SSB_BUSTYPE_PCI) { |
| memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); |
| return 0; |
| } else { |
| pr_err("unable to fill SPROM for given bustype\n"); |
| return -EINVAL; |
| } |
| } |
| #endif /* CONFIG_SSB_PCIHOST */ |
| |
| /* |
| * return board name for /proc/cpuinfo |
| */ |
| const char *board_get_name(void) |
| { |
| return board.name; |
| } |
| |
| /* |
| * early init callback, read nvram data from flash and checksum it |
| */ |
| void __init board_prom_init(void) |
| { |
| unsigned int i; |
| u8 *boot_addr, *cfe; |
| char cfe_version[32]; |
| char *board_name = NULL; |
| u32 val; |
| struct bcm_hcs *hcs; |
| |
| /* read base address of boot chip select (0) |
| * 6328/6362 do not have MPI but boot from a fixed address |
| */ |
| if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) { |
| val = 0x18000000; |
| } else { |
| val = bcm_mpi_readl(MPI_CSBASE_REG(0)); |
| val &= MPI_CSBASE_BASE_MASK; |
| } |
| boot_addr = (u8 *)KSEG1ADDR(val); |
| |
| /* dump cfe version */ |
| cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; |
| if (strstarts(cfe, "cfe-")) { |
| if(cfe[4] == 'v') { |
| if(cfe[5] == 'd') |
| snprintf(cfe_version, 11, "%s", |
| (char *) &cfe[5]); |
| else if (cfe[10] > 0) |
| snprintf(cfe_version, sizeof(cfe_version), |
| "%u.%u.%u-%u.%u-%u", cfe[5], cfe[6], |
| cfe[7], cfe[8], cfe[9], cfe[10]); |
| else |
| snprintf(cfe_version, sizeof(cfe_version), |
| "%u.%u.%u-%u.%u", cfe[5], cfe[6], |
| cfe[7], cfe[8], cfe[9]); |
| } else { |
| snprintf(cfe_version, 12, "%s", (char *) &cfe[4]); |
| } |
| } else { |
| strcpy(cfe_version, "unknown"); |
| } |
| pr_info("CFE version: %s\n", cfe_version); |
| |
| bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET); |
| |
| if (BCMCPU_IS_3368()) { |
| hcs = (struct bcm_hcs *)boot_addr; |
| board_name = hcs->filename; |
| } else { |
| board_name = bcm63xx_nvram_get_name(); |
| } |
| /* find board by name */ |
| for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { |
| if (strncmp(board_name, bcm963xx_boards[i]->name, 16)) |
| continue; |
| /* copy, board desc array is marked initdata */ |
| memcpy(&board, bcm963xx_boards[i], sizeof(board)); |
| break; |
| } |
| |
| /* bail out if board is not found, will complain later */ |
| if (!board.name[0]) { |
| char name[17]; |
| memcpy(name, board_name, 16); |
| name[16] = 0; |
| pr_err("unknown bcm963xx board: %s\n", name); |
| return; |
| } |
| |
| /* setup pin multiplexing depending on board enabled device, |
| * this has to be done this early since PCI init is done |
| * inside arch_initcall */ |
| val = 0; |
| |
| #ifdef CONFIG_PCI |
| if (board.has_pci) { |
| bcm63xx_pci_enabled = 1; |
| if (BCMCPU_IS_6348()) |
| val |= GPIO_MODE_6348_G2_PCI; |
| } |
| #endif /* CONFIG_PCI */ |
| |
| if (board.has_pccard) { |
| if (BCMCPU_IS_6348()) |
| val |= GPIO_MODE_6348_G1_MII_PCCARD; |
| } |
| |
| if (board.has_enet0 && !board.enet0.use_internal_phy) { |
| if (BCMCPU_IS_6348()) |
| val |= GPIO_MODE_6348_G3_EXT_MII | |
| GPIO_MODE_6348_G0_EXT_MII; |
| } |
| |
| if (board.has_enet1 && !board.enet1.use_internal_phy) { |
| if (BCMCPU_IS_6348()) |
| val |= GPIO_MODE_6348_G3_EXT_MII | |
| GPIO_MODE_6348_G0_EXT_MII; |
| } |
| |
| bcm_gpio_writel(val, GPIO_MODE_REG); |
| } |
| |
| /* |
| * second stage init callback, good time to panic if we couldn't |
| * identify on which board we're running since early printk is working |
| */ |
| void __init board_setup(void) |
| { |
| if (!board.name[0]) |
| panic("unable to detect bcm963xx board"); |
| pr_info("board name: %s\n", board.name); |
| |
| /* make sure we're running on expected cpu */ |
| if (bcm63xx_get_cpu_id() != board.expected_cpu_id) |
| panic("unexpected CPU for bcm963xx board"); |
| } |
| |
| static struct gpio_led_platform_data bcm63xx_led_data; |
| |
| static struct platform_device bcm63xx_gpio_leds = { |
| .name = "leds-gpio", |
| .id = 0, |
| .dev.platform_data = &bcm63xx_led_data, |
| }; |
| |
| /* |
| * third stage init callback, register all board devices. |
| */ |
| int __init board_register_devices(void) |
| { |
| if (board.has_uart0) |
| bcm63xx_uart_register(0); |
| |
| if (board.has_uart1) |
| bcm63xx_uart_register(1); |
| |
| if (board.has_pccard) |
| bcm63xx_pcmcia_register(); |
| |
| if (board.has_enet0 && |
| !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr)) |
| bcm63xx_enet_register(0, &board.enet0); |
| |
| if (board.has_enet1 && |
| !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr)) |
| bcm63xx_enet_register(1, &board.enet1); |
| |
| if (board.has_enetsw && |
| !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr)) |
| bcm63xx_enetsw_register(&board.enetsw); |
| |
| if (board.has_usbd) |
| bcm63xx_usbd_register(&board.usbd); |
| |
| /* Generate MAC address for WLAN and register our SPROM, |
| * do this after registering enet devices |
| */ |
| #ifdef CONFIG_SSB_PCIHOST |
| if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) { |
| memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); |
| memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); |
| if (ssb_arch_register_fallback_sprom( |
| &bcm63xx_get_fallback_sprom) < 0) |
| pr_err("failed to register fallback SPROM\n"); |
| } |
| #endif /* CONFIG_SSB_PCIHOST */ |
| |
| bcm63xx_spi_register(); |
| |
| bcm63xx_hsspi_register(); |
| |
| bcm63xx_flash_register(); |
| |
| bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); |
| bcm63xx_led_data.leds = board.leds; |
| |
| platform_device_register(&bcm63xx_gpio_leds); |
| |
| if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) |
| gpio_request_one(board.ephy_reset_gpio, |
| board.ephy_reset_gpio_flags, "ephy-reset"); |
| |
| return 0; |
| } |