| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * |
| * Support for the mpeg transport stream transfers |
| * PCI function #2 of the cx2388x. |
| * |
| * (c) 2004 Jelle Foks <jelle@foks.us> |
| * (c) 2004 Chris Pascoe <c.pascoe@itee.uq.edu.au> |
| * (c) 2004 Gerd Knorr <kraxel@bytesex.org> |
| */ |
| |
| #include "cx88.h" |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| |
| /* ------------------------------------------------------------------ */ |
| |
| MODULE_DESCRIPTION("mpeg driver for cx2388x based TV cards"); |
| MODULE_AUTHOR("Jelle Foks <jelle@foks.us>"); |
| MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); |
| MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(CX88_VERSION); |
| |
| static unsigned int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug messages [mpeg]"); |
| |
| #define dprintk(level, fmt, arg...) do { \ |
| if (debug + 1 > level) \ |
| printk(KERN_DEBUG pr_fmt("%s: mpeg:" fmt), \ |
| __func__, ##arg); \ |
| } while (0) |
| |
| #if defined(CONFIG_MODULES) && defined(MODULE) |
| static void request_module_async(struct work_struct *work) |
| { |
| struct cx8802_dev *dev = container_of(work, struct cx8802_dev, |
| request_module_wk); |
| |
| if (dev->core->board.mpeg & CX88_MPEG_DVB) |
| request_module("cx88-dvb"); |
| if (dev->core->board.mpeg & CX88_MPEG_BLACKBIRD) |
| request_module("cx88-blackbird"); |
| } |
| |
| static void request_modules(struct cx8802_dev *dev) |
| { |
| INIT_WORK(&dev->request_module_wk, request_module_async); |
| schedule_work(&dev->request_module_wk); |
| } |
| |
| static void flush_request_modules(struct cx8802_dev *dev) |
| { |
| flush_work(&dev->request_module_wk); |
| } |
| #else |
| #define request_modules(dev) |
| #define flush_request_modules(dev) |
| #endif /* CONFIG_MODULES */ |
| |
| static LIST_HEAD(cx8802_devlist); |
| static DEFINE_MUTEX(cx8802_mutex); |
| /* ------------------------------------------------------------------ */ |
| |
| int cx8802_start_dma(struct cx8802_dev *dev, |
| struct cx88_dmaqueue *q, |
| struct cx88_buffer *buf) |
| { |
| struct cx88_core *core = dev->core; |
| |
| dprintk(1, "w: %d, h: %d, f: %d\n", |
| core->width, core->height, core->field); |
| |
| /* setup fifo + format */ |
| cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH28], |
| dev->ts_packet_size, buf->risc.dma); |
| |
| /* write TS length to chip */ |
| cx_write(MO_TS_LNGTH, dev->ts_packet_size); |
| |
| /* |
| * FIXME: this needs a review. |
| * also: move to cx88-blackbird + cx88-dvb source files? |
| */ |
| |
| dprintk(1, "core->active_type_id = 0x%08x\n", core->active_type_id); |
| |
| if ((core->active_type_id == CX88_MPEG_DVB) && |
| (core->board.mpeg & CX88_MPEG_DVB)) { |
| dprintk(1, "cx8802_start_dma doing .dvb\n"); |
| /* negedge driven & software reset */ |
| cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl); |
| udelay(100); |
| cx_write(MO_PINMUX_IO, 0x00); |
| cx_write(TS_HW_SOP_CNTRL, 0x47 << 16 | 188 << 4 | 0x01); |
| switch (core->boardnr) { |
| case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q: |
| case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T: |
| case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD: |
| case CX88_BOARD_PCHDTV_HD5500: |
| cx_write(TS_SOP_STAT, 1 << 13); |
| break; |
| case CX88_BOARD_SAMSUNG_SMT_7020: |
| cx_write(TS_SOP_STAT, 0x00); |
| break; |
| case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: |
| case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: |
| /* Enable MPEG parallel IO and video signal pins */ |
| cx_write(MO_PINMUX_IO, 0x88); |
| udelay(100); |
| break; |
| case CX88_BOARD_HAUPPAUGE_HVR1300: |
| /* Enable MPEG parallel IO and video signal pins */ |
| cx_write(MO_PINMUX_IO, 0x88); |
| cx_write(TS_SOP_STAT, 0); |
| cx_write(TS_VALERR_CNTRL, 0); |
| break; |
| case CX88_BOARD_PINNACLE_PCTV_HD_800i: |
| /* Enable MPEG parallel IO and video signal pins */ |
| cx_write(MO_PINMUX_IO, 0x88); |
| cx_write(TS_HW_SOP_CNTRL, (0x47 << 16) | (188 << 4)); |
| dev->ts_gen_cntrl = 5; |
| cx_write(TS_SOP_STAT, 0); |
| cx_write(TS_VALERR_CNTRL, 0); |
| udelay(100); |
| break; |
| default: |
| cx_write(TS_SOP_STAT, 0x00); |
| break; |
| } |
| cx_write(TS_GEN_CNTRL, dev->ts_gen_cntrl); |
| udelay(100); |
| } else if ((core->active_type_id == CX88_MPEG_BLACKBIRD) && |
| (core->board.mpeg & CX88_MPEG_BLACKBIRD)) { |
| dprintk(1, "cx8802_start_dma doing .blackbird\n"); |
| cx_write(MO_PINMUX_IO, 0x88); /* enable MPEG parallel IO */ |
| |
| /* punctured clock TS & posedge driven & software reset */ |
| cx_write(TS_GEN_CNTRL, 0x46); |
| udelay(100); |
| |
| cx_write(TS_HW_SOP_CNTRL, 0x408); /* mpeg start byte */ |
| cx_write(TS_VALERR_CNTRL, 0x2000); |
| |
| /* punctured clock TS & posedge driven */ |
| cx_write(TS_GEN_CNTRL, 0x06); |
| udelay(100); |
| } else { |
| pr_err("%s() Failed. Unsupported value in .mpeg (0x%08x)\n", |
| __func__, core->board.mpeg); |
| return -EINVAL; |
| } |
| |
| /* reset counter */ |
| cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET); |
| q->count = 0; |
| |
| /* enable irqs */ |
| dprintk(1, "setting the interrupt mask\n"); |
| cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT); |
| cx_set(MO_TS_INTMSK, 0x1f0011); |
| |
| /* start dma */ |
| cx_set(MO_DEV_CNTRL2, (1 << 5)); |
| cx_set(MO_TS_DMACNTRL, 0x11); |
| return 0; |
| } |
| EXPORT_SYMBOL(cx8802_start_dma); |
| |
| static int cx8802_stop_dma(struct cx8802_dev *dev) |
| { |
| struct cx88_core *core = dev->core; |
| |
| dprintk(1, "\n"); |
| |
| /* stop dma */ |
| cx_clear(MO_TS_DMACNTRL, 0x11); |
| |
| /* disable irqs */ |
| cx_clear(MO_PCI_INTMSK, PCI_INT_TSINT); |
| cx_clear(MO_TS_INTMSK, 0x1f0011); |
| |
| /* Reset the controller */ |
| cx_write(TS_GEN_CNTRL, 0xcd); |
| return 0; |
| } |
| |
| static int cx8802_restart_queue(struct cx8802_dev *dev, |
| struct cx88_dmaqueue *q) |
| { |
| struct cx88_buffer *buf; |
| |
| dprintk(1, "\n"); |
| if (list_empty(&q->active)) |
| return 0; |
| |
| buf = list_entry(q->active.next, struct cx88_buffer, list); |
| dprintk(2, "restart_queue [%p/%d]: restart dma\n", |
| buf, buf->vb.vb2_buf.index); |
| cx8802_start_dma(dev, q, buf); |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| int cx8802_buf_prepare(struct vb2_queue *q, struct cx8802_dev *dev, |
| struct cx88_buffer *buf) |
| { |
| int size = dev->ts_packet_size * dev->ts_packet_count; |
| struct sg_table *sgt = vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0); |
| struct cx88_riscmem *risc = &buf->risc; |
| int rc; |
| |
| if (vb2_plane_size(&buf->vb.vb2_buf, 0) < size) |
| return -EINVAL; |
| vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size); |
| |
| rc = cx88_risc_databuffer(dev->pci, risc, sgt->sgl, |
| dev->ts_packet_size, dev->ts_packet_count, 0); |
| if (rc) { |
| if (risc->cpu) |
| dma_free_coherent(&dev->pci->dev, risc->size, |
| risc->cpu, risc->dma); |
| memset(risc, 0, sizeof(*risc)); |
| return rc; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(cx8802_buf_prepare); |
| |
| void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf) |
| { |
| struct cx88_buffer *prev; |
| struct cx88_dmaqueue *cx88q = &dev->mpegq; |
| |
| dprintk(1, "\n"); |
| /* add jump to start */ |
| buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 8); |
| buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC); |
| buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 8); |
| |
| if (list_empty(&cx88q->active)) { |
| dprintk(1, "queue is empty - first active\n"); |
| list_add_tail(&buf->list, &cx88q->active); |
| dprintk(1, "[%p/%d] %s - first active\n", |
| buf, buf->vb.vb2_buf.index, __func__); |
| |
| } else { |
| buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1); |
| dprintk(1, "queue is not empty - append to active\n"); |
| prev = list_entry(cx88q->active.prev, struct cx88_buffer, list); |
| list_add_tail(&buf->list, &cx88q->active); |
| prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); |
| dprintk(1, "[%p/%d] %s - append to active\n", |
| buf, buf->vb.vb2_buf.index, __func__); |
| } |
| } |
| EXPORT_SYMBOL(cx8802_buf_queue); |
| |
| /* ----------------------------------------------------------- */ |
| |
| static void do_cancel_buffers(struct cx8802_dev *dev) |
| { |
| struct cx88_dmaqueue *q = &dev->mpegq; |
| struct cx88_buffer *buf; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| while (!list_empty(&q->active)) { |
| buf = list_entry(q->active.next, struct cx88_buffer, list); |
| list_del(&buf->list); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); |
| } |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| void cx8802_cancel_buffers(struct cx8802_dev *dev) |
| { |
| dprintk(1, "\n"); |
| cx8802_stop_dma(dev); |
| do_cancel_buffers(dev); |
| } |
| EXPORT_SYMBOL(cx8802_cancel_buffers); |
| |
| static const char *cx88_mpeg_irqs[32] = { |
| "ts_risci1", NULL, NULL, NULL, |
| "ts_risci2", NULL, NULL, NULL, |
| "ts_oflow", NULL, NULL, NULL, |
| "ts_sync", NULL, NULL, NULL, |
| "opc_err", "par_err", "rip_err", "pci_abort", |
| "ts_err?", |
| }; |
| |
| static void cx8802_mpeg_irq(struct cx8802_dev *dev) |
| { |
| struct cx88_core *core = dev->core; |
| u32 status, mask, count; |
| |
| dprintk(1, "\n"); |
| status = cx_read(MO_TS_INTSTAT); |
| mask = cx_read(MO_TS_INTMSK); |
| if (0 == (status & mask)) |
| return; |
| |
| cx_write(MO_TS_INTSTAT, status); |
| |
| if (debug || (status & mask & ~0xff)) |
| cx88_print_irqbits("irq mpeg ", |
| cx88_mpeg_irqs, ARRAY_SIZE(cx88_mpeg_irqs), |
| status, mask); |
| |
| /* risc op code error */ |
| if (status & (1 << 16)) { |
| pr_warn("mpeg risc op code error\n"); |
| cx_clear(MO_TS_DMACNTRL, 0x11); |
| cx88_sram_channel_dump(dev->core, |
| &cx88_sram_channels[SRAM_CH28]); |
| } |
| |
| /* risc1 y */ |
| if (status & 0x01) { |
| dprintk(1, "wake up\n"); |
| spin_lock(&dev->slock); |
| count = cx_read(MO_TS_GPCNT); |
| cx88_wakeup(dev->core, &dev->mpegq, count); |
| spin_unlock(&dev->slock); |
| } |
| |
| /* other general errors */ |
| if (status & 0x1f0100) { |
| dprintk(0, "general errors: 0x%08x\n", status & 0x1f0100); |
| spin_lock(&dev->slock); |
| cx8802_stop_dma(dev); |
| spin_unlock(&dev->slock); |
| } |
| } |
| |
| #define MAX_IRQ_LOOP 10 |
| |
| static irqreturn_t cx8802_irq(int irq, void *dev_id) |
| { |
| struct cx8802_dev *dev = dev_id; |
| struct cx88_core *core = dev->core; |
| u32 status; |
| int loop, handled = 0; |
| |
| for (loop = 0; loop < MAX_IRQ_LOOP; loop++) { |
| status = cx_read(MO_PCI_INTSTAT) & |
| (core->pci_irqmask | PCI_INT_TSINT); |
| if (status == 0) |
| goto out; |
| dprintk(1, "cx8802_irq\n"); |
| dprintk(1, " loop: %d/%d\n", loop, MAX_IRQ_LOOP); |
| dprintk(1, " status: %d\n", status); |
| handled = 1; |
| cx_write(MO_PCI_INTSTAT, status); |
| |
| if (status & core->pci_irqmask) |
| cx88_core_irq(core, status); |
| if (status & PCI_INT_TSINT) |
| cx8802_mpeg_irq(dev); |
| } |
| if (loop == MAX_IRQ_LOOP) { |
| dprintk(0, "clearing mask\n"); |
| pr_warn("irq loop -- clearing mask\n"); |
| cx_write(MO_PCI_INTMSK, 0); |
| } |
| |
| out: |
| return IRQ_RETVAL(handled); |
| } |
| |
| static int cx8802_init_common(struct cx8802_dev *dev) |
| { |
| struct cx88_core *core = dev->core; |
| int err; |
| |
| /* pci init */ |
| if (pci_enable_device(dev->pci)) |
| return -EIO; |
| pci_set_master(dev->pci); |
| err = dma_set_mask(&dev->pci->dev, DMA_BIT_MASK(32)); |
| if (err) { |
| pr_err("Oops: no 32bit PCI DMA ???\n"); |
| return -EIO; |
| } |
| |
| dev->pci_rev = dev->pci->revision; |
| pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER, &dev->pci_lat); |
| pr_info("found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", |
| pci_name(dev->pci), dev->pci_rev, dev->pci->irq, |
| dev->pci_lat, |
| (unsigned long long)pci_resource_start(dev->pci, 0)); |
| |
| /* initialize driver struct */ |
| spin_lock_init(&dev->slock); |
| |
| /* init dma queue */ |
| INIT_LIST_HEAD(&dev->mpegq.active); |
| |
| /* get irq */ |
| err = request_irq(dev->pci->irq, cx8802_irq, |
| IRQF_SHARED, dev->core->name, dev); |
| if (err < 0) { |
| pr_err("can't get IRQ %d\n", dev->pci->irq); |
| return err; |
| } |
| cx_set(MO_PCI_INTMSK, core->pci_irqmask); |
| |
| /* everything worked */ |
| pci_set_drvdata(dev->pci, dev); |
| return 0; |
| } |
| |
| static void cx8802_fini_common(struct cx8802_dev *dev) |
| { |
| dprintk(2, "\n"); |
| cx8802_stop_dma(dev); |
| pci_disable_device(dev->pci); |
| |
| /* unregister stuff */ |
| free_irq(dev->pci->irq, dev); |
| } |
| |
| /* ----------------------------------------------------------- */ |
| |
| static int cx8802_suspend_common(struct pci_dev *pci_dev, pm_message_t state) |
| { |
| struct cx8802_dev *dev = pci_get_drvdata(pci_dev); |
| unsigned long flags; |
| |
| /* stop mpeg dma */ |
| spin_lock_irqsave(&dev->slock, flags); |
| if (!list_empty(&dev->mpegq.active)) { |
| dprintk(2, "suspend\n"); |
| pr_info("suspend mpeg\n"); |
| cx8802_stop_dma(dev); |
| } |
| spin_unlock_irqrestore(&dev->slock, flags); |
| |
| /* FIXME -- shutdown device */ |
| cx88_shutdown(dev->core); |
| |
| pci_save_state(pci_dev); |
| if (pci_set_power_state(pci_dev, |
| pci_choose_state(pci_dev, state)) != 0) { |
| pci_disable_device(pci_dev); |
| dev->state.disabled = 1; |
| } |
| return 0; |
| } |
| |
| static int cx8802_resume_common(struct pci_dev *pci_dev) |
| { |
| struct cx8802_dev *dev = pci_get_drvdata(pci_dev); |
| unsigned long flags; |
| int err; |
| |
| if (dev->state.disabled) { |
| err = pci_enable_device(pci_dev); |
| if (err) { |
| pr_err("can't enable device\n"); |
| return err; |
| } |
| dev->state.disabled = 0; |
| } |
| err = pci_set_power_state(pci_dev, PCI_D0); |
| if (err) { |
| pr_err("can't enable device\n"); |
| pci_disable_device(pci_dev); |
| dev->state.disabled = 1; |
| |
| return err; |
| } |
| pci_restore_state(pci_dev); |
| |
| /* FIXME: re-initialize hardware */ |
| cx88_reset(dev->core); |
| |
| /* restart video+vbi capture */ |
| spin_lock_irqsave(&dev->slock, flags); |
| if (!list_empty(&dev->mpegq.active)) { |
| pr_info("resume mpeg\n"); |
| cx8802_restart_queue(dev, &dev->mpegq); |
| } |
| spin_unlock_irqrestore(&dev->slock, flags); |
| |
| return 0; |
| } |
| |
| struct cx8802_driver *cx8802_get_driver(struct cx8802_dev *dev, |
| enum cx88_board_type btype) |
| { |
| struct cx8802_driver *d; |
| |
| list_for_each_entry(d, &dev->drvlist, drvlist) |
| if (d->type_id == btype) |
| return d; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(cx8802_get_driver); |
| |
| /* Driver asked for hardware access. */ |
| static int cx8802_request_acquire(struct cx8802_driver *drv) |
| { |
| struct cx88_core *core = drv->core; |
| unsigned int i; |
| |
| /* Fail a request for hardware if the device is busy. */ |
| if (core->active_type_id != CX88_BOARD_NONE && |
| core->active_type_id != drv->type_id) |
| return -EBUSY; |
| |
| if (drv->type_id == CX88_MPEG_DVB) { |
| /* When switching to DVB, always set the input to the tuner */ |
| core->last_analog_input = core->input; |
| core->input = 0; |
| for (i = 0; |
| i < ARRAY_SIZE(core->board.input); |
| i++) { |
| if (core->board.input[i].type == CX88_VMUX_DVB) { |
| core->input = i; |
| break; |
| } |
| } |
| } |
| |
| if (drv->advise_acquire) { |
| core->active_ref++; |
| if (core->active_type_id == CX88_BOARD_NONE) { |
| core->active_type_id = drv->type_id; |
| drv->advise_acquire(drv); |
| } |
| |
| dprintk(1, "Post acquire GPIO=%x\n", cx_read(MO_GP0_IO)); |
| } |
| |
| return 0; |
| } |
| |
| /* Driver asked to release hardware. */ |
| static int cx8802_request_release(struct cx8802_driver *drv) |
| { |
| struct cx88_core *core = drv->core; |
| |
| if (drv->advise_release && --core->active_ref == 0) { |
| if (drv->type_id == CX88_MPEG_DVB) { |
| /* |
| * If the DVB driver is releasing, reset the input |
| * state to the last configured analog input |
| */ |
| core->input = core->last_analog_input; |
| } |
| |
| drv->advise_release(drv); |
| core->active_type_id = CX88_BOARD_NONE; |
| dprintk(1, "Post release GPIO=%x\n", cx_read(MO_GP0_IO)); |
| } |
| |
| return 0; |
| } |
| |
| static int cx8802_check_driver(struct cx8802_driver *drv) |
| { |
| if (!drv) |
| return -ENODEV; |
| |
| if ((drv->type_id != CX88_MPEG_DVB) && |
| (drv->type_id != CX88_MPEG_BLACKBIRD)) |
| return -EINVAL; |
| |
| if ((drv->hw_access != CX8802_DRVCTL_SHARED) && |
| (drv->hw_access != CX8802_DRVCTL_EXCLUSIVE)) |
| return -EINVAL; |
| |
| if ((!drv->probe) || |
| (!drv->remove) || |
| (!drv->advise_acquire) || |
| (!drv->advise_release)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| int cx8802_register_driver(struct cx8802_driver *drv) |
| { |
| struct cx8802_dev *dev; |
| struct cx8802_driver *driver; |
| int err, i = 0; |
| |
| pr_info("registering cx8802 driver, type: %s access: %s\n", |
| drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird", |
| drv->hw_access == CX8802_DRVCTL_SHARED ? |
| "shared" : "exclusive"); |
| |
| err = cx8802_check_driver(drv); |
| if (err) { |
| pr_err("cx8802_driver is invalid\n"); |
| return err; |
| } |
| |
| mutex_lock(&cx8802_mutex); |
| |
| list_for_each_entry(dev, &cx8802_devlist, devlist) { |
| pr_info("subsystem: %04x:%04x, board: %s [card=%d]\n", |
| dev->pci->subsystem_vendor, |
| dev->pci->subsystem_device, dev->core->board.name, |
| dev->core->boardnr); |
| |
| /* Bring up a new struct for each driver instance */ |
| driver = kzalloc(sizeof(*drv), GFP_KERNEL); |
| if (!driver) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| /* Snapshot of the driver registration data */ |
| drv->core = dev->core; |
| drv->suspend = cx8802_suspend_common; |
| drv->resume = cx8802_resume_common; |
| drv->request_acquire = cx8802_request_acquire; |
| drv->request_release = cx8802_request_release; |
| memcpy(driver, drv, sizeof(*driver)); |
| |
| mutex_lock(&drv->core->lock); |
| err = drv->probe(driver); |
| if (err == 0) { |
| i++; |
| list_add_tail(&driver->drvlist, &dev->drvlist); |
| } else { |
| pr_err("cx8802 probe failed, err = %d\n", err); |
| } |
| mutex_unlock(&drv->core->lock); |
| } |
| |
| err = i ? 0 : -ENODEV; |
| out: |
| mutex_unlock(&cx8802_mutex); |
| return err; |
| } |
| EXPORT_SYMBOL(cx8802_register_driver); |
| |
| int cx8802_unregister_driver(struct cx8802_driver *drv) |
| { |
| struct cx8802_dev *dev; |
| struct cx8802_driver *d, *dtmp; |
| int err = 0; |
| |
| pr_info("unregistering cx8802 driver, type: %s access: %s\n", |
| drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird", |
| drv->hw_access == CX8802_DRVCTL_SHARED ? |
| "shared" : "exclusive"); |
| |
| mutex_lock(&cx8802_mutex); |
| |
| list_for_each_entry(dev, &cx8802_devlist, devlist) { |
| pr_info("subsystem: %04x:%04x, board: %s [card=%d]\n", |
| dev->pci->subsystem_vendor, |
| dev->pci->subsystem_device, dev->core->board.name, |
| dev->core->boardnr); |
| |
| mutex_lock(&dev->core->lock); |
| |
| list_for_each_entry_safe(d, dtmp, &dev->drvlist, drvlist) { |
| /* only unregister the correct driver type */ |
| if (d->type_id != drv->type_id) |
| continue; |
| |
| err = d->remove(d); |
| if (err == 0) { |
| list_del(&d->drvlist); |
| kfree(d); |
| } else |
| pr_err("cx8802 driver remove failed (%d)\n", |
| err); |
| } |
| |
| mutex_unlock(&dev->core->lock); |
| } |
| |
| mutex_unlock(&cx8802_mutex); |
| |
| return err; |
| } |
| EXPORT_SYMBOL(cx8802_unregister_driver); |
| |
| /* ----------------------------------------------------------- */ |
| static int cx8802_probe(struct pci_dev *pci_dev, |
| const struct pci_device_id *pci_id) |
| { |
| struct cx8802_dev *dev; |
| struct cx88_core *core; |
| int err; |
| |
| /* general setup */ |
| core = cx88_core_get(pci_dev); |
| if (!core) |
| return -EINVAL; |
| |
| pr_info("cx2388x 8802 Driver Manager\n"); |
| |
| err = -ENODEV; |
| if (!core->board.mpeg) |
| goto fail_core; |
| |
| err = -ENOMEM; |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| goto fail_core; |
| dev->pci = pci_dev; |
| dev->core = core; |
| |
| /* Maintain a reference so cx88-video can query the 8802 device. */ |
| core->dvbdev = dev; |
| |
| err = cx8802_init_common(dev); |
| if (err != 0) |
| goto fail_dev; |
| |
| INIT_LIST_HEAD(&dev->drvlist); |
| mutex_lock(&cx8802_mutex); |
| list_add_tail(&dev->devlist, &cx8802_devlist); |
| mutex_unlock(&cx8802_mutex); |
| |
| /* now autoload cx88-dvb or cx88-blackbird */ |
| request_modules(dev); |
| return 0; |
| |
| fail_dev: |
| kfree(dev); |
| fail_core: |
| core->dvbdev = NULL; |
| cx88_core_put(core, pci_dev); |
| return err; |
| } |
| |
| static void cx8802_remove(struct pci_dev *pci_dev) |
| { |
| struct cx8802_dev *dev; |
| |
| dev = pci_get_drvdata(pci_dev); |
| |
| dprintk(1, "%s\n", __func__); |
| |
| flush_request_modules(dev); |
| |
| mutex_lock(&dev->core->lock); |
| |
| if (!list_empty(&dev->drvlist)) { |
| struct cx8802_driver *drv, *tmp; |
| int err; |
| |
| pr_warn("Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n"); |
| |
| list_for_each_entry_safe(drv, tmp, &dev->drvlist, drvlist) { |
| err = drv->remove(drv); |
| if (err == 0) { |
| list_del(&drv->drvlist); |
| } else |
| pr_err("cx8802 driver remove failed (%d)\n", |
| err); |
| kfree(drv); |
| } |
| } |
| |
| mutex_unlock(&dev->core->lock); |
| |
| /* Destroy any 8802 reference. */ |
| dev->core->dvbdev = NULL; |
| |
| /* common */ |
| cx8802_fini_common(dev); |
| cx88_core_put(dev->core, dev->pci); |
| kfree(dev); |
| } |
| |
| static const struct pci_device_id cx8802_pci_tbl[] = { |
| { |
| .vendor = 0x14f1, |
| .device = 0x8802, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, { |
| /* --- end of list --- */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl); |
| |
| static struct pci_driver cx8802_pci_driver = { |
| .name = "cx88-mpeg driver manager", |
| .id_table = cx8802_pci_tbl, |
| .probe = cx8802_probe, |
| .remove = cx8802_remove, |
| }; |
| |
| module_pci_driver(cx8802_pci_driver); |