| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * MIPS-specific support for Broadcom STB S2/S3/S5 power management |
| * |
| * Copyright (C) 2016-2017 Broadcom |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/printk.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/delay.h> |
| #include <linux/suspend.h> |
| #include <asm/bmips.h> |
| #include <asm/tlbflush.h> |
| |
| #include "pm.h" |
| |
| #define S2_NUM_PARAMS 6 |
| #define MAX_NUM_MEMC 3 |
| |
| /* S3 constants */ |
| #define MAX_GP_REGS 16 |
| #define MAX_CP0_REGS 32 |
| #define NUM_MEMC_CLIENTS 128 |
| #define AON_CTRL_RAM_SIZE 128 |
| #define BRCMSTB_S3_MAGIC 0x5AFEB007 |
| |
| #define CLEAR_RESET_MASK 0x01 |
| |
| /* Index each CP0 register that needs to be saved */ |
| #define CONTEXT 0 |
| #define USER_LOCAL 1 |
| #define PGMK 2 |
| #define HWRENA 3 |
| #define COMPARE 4 |
| #define STATUS 5 |
| #define CONFIG 6 |
| #define MODE 7 |
| #define EDSP 8 |
| #define BOOT_VEC 9 |
| #define EBASE 10 |
| |
| struct brcmstb_memc { |
| void __iomem *ddr_phy_base; |
| void __iomem *arb_base; |
| }; |
| |
| struct brcmstb_pm_control { |
| void __iomem *aon_ctrl_base; |
| void __iomem *aon_sram_base; |
| void __iomem *timers_base; |
| struct brcmstb_memc memcs[MAX_NUM_MEMC]; |
| int num_memc; |
| }; |
| |
| struct brcm_pm_s3_context { |
| u32 cp0_regs[MAX_CP0_REGS]; |
| u32 memc0_rts[NUM_MEMC_CLIENTS]; |
| u32 sc_boot_vec; |
| }; |
| |
| struct brcmstb_mem_transfer; |
| |
| struct brcmstb_mem_transfer { |
| struct brcmstb_mem_transfer *next; |
| void *src; |
| void *dst; |
| dma_addr_t pa_src; |
| dma_addr_t pa_dst; |
| u32 len; |
| u8 key; |
| u8 mode; |
| u8 src_remapped; |
| u8 dst_remapped; |
| u8 src_dst_remapped; |
| }; |
| |
| #define AON_SAVE_SRAM(base, idx, val) \ |
| __raw_writel(val, base + (idx << 2)) |
| |
| /* Used for saving registers in asm */ |
| u32 gp_regs[MAX_GP_REGS]; |
| |
| #define BSP_CLOCK_STOP 0x00 |
| #define PM_INITIATE 0x01 |
| |
| static struct brcmstb_pm_control ctrl; |
| |
| static void brcm_pm_save_cp0_context(struct brcm_pm_s3_context *ctx) |
| { |
| /* Generic MIPS */ |
| ctx->cp0_regs[CONTEXT] = read_c0_context(); |
| ctx->cp0_regs[USER_LOCAL] = read_c0_userlocal(); |
| ctx->cp0_regs[PGMK] = read_c0_pagemask(); |
| ctx->cp0_regs[HWRENA] = read_c0_cache(); |
| ctx->cp0_regs[COMPARE] = read_c0_compare(); |
| ctx->cp0_regs[STATUS] = read_c0_status(); |
| |
| /* Broadcom specific */ |
| ctx->cp0_regs[CONFIG] = read_c0_brcm_config(); |
| ctx->cp0_regs[MODE] = read_c0_brcm_mode(); |
| ctx->cp0_regs[EDSP] = read_c0_brcm_edsp(); |
| ctx->cp0_regs[BOOT_VEC] = read_c0_brcm_bootvec(); |
| ctx->cp0_regs[EBASE] = read_c0_ebase(); |
| |
| ctx->sc_boot_vec = bmips_read_zscm_reg(0xa0); |
| } |
| |
| static void brcm_pm_restore_cp0_context(struct brcm_pm_s3_context *ctx) |
| { |
| /* Restore cp0 state */ |
| bmips_write_zscm_reg(0xa0, ctx->sc_boot_vec); |
| |
| /* Generic MIPS */ |
| write_c0_context(ctx->cp0_regs[CONTEXT]); |
| write_c0_userlocal(ctx->cp0_regs[USER_LOCAL]); |
| write_c0_pagemask(ctx->cp0_regs[PGMK]); |
| write_c0_cache(ctx->cp0_regs[HWRENA]); |
| write_c0_compare(ctx->cp0_regs[COMPARE]); |
| write_c0_status(ctx->cp0_regs[STATUS]); |
| |
| /* Broadcom specific */ |
| write_c0_brcm_config(ctx->cp0_regs[CONFIG]); |
| write_c0_brcm_mode(ctx->cp0_regs[MODE]); |
| write_c0_brcm_edsp(ctx->cp0_regs[EDSP]); |
| write_c0_brcm_bootvec(ctx->cp0_regs[BOOT_VEC]); |
| write_c0_ebase(ctx->cp0_regs[EBASE]); |
| } |
| |
| static void brcmstb_pm_handshake(void) |
| { |
| void __iomem *base = ctrl.aon_ctrl_base; |
| u32 tmp; |
| |
| /* BSP power handshake, v1 */ |
| tmp = __raw_readl(base + AON_CTRL_HOST_MISC_CMDS); |
| tmp &= ~1UL; |
| __raw_writel(tmp, base + AON_CTRL_HOST_MISC_CMDS); |
| (void)__raw_readl(base + AON_CTRL_HOST_MISC_CMDS); |
| |
| __raw_writel(0, base + AON_CTRL_PM_INITIATE); |
| (void)__raw_readl(base + AON_CTRL_PM_INITIATE); |
| __raw_writel(BSP_CLOCK_STOP | PM_INITIATE, |
| base + AON_CTRL_PM_INITIATE); |
| /* |
| * HACK: BSP may have internal race on the CLOCK_STOP command. |
| * Avoid touching the BSP for a few milliseconds. |
| */ |
| mdelay(3); |
| } |
| |
| static void brcmstb_pm_s5(void) |
| { |
| void __iomem *base = ctrl.aon_ctrl_base; |
| |
| brcmstb_pm_handshake(); |
| |
| /* Clear magic s3 warm-boot value */ |
| AON_SAVE_SRAM(ctrl.aon_sram_base, 0, 0); |
| |
| /* Set the countdown */ |
| __raw_writel(0x10, base + AON_CTRL_PM_CPU_WAIT_COUNT); |
| (void)__raw_readl(base + AON_CTRL_PM_CPU_WAIT_COUNT); |
| |
| /* Prepare to S5 cold boot */ |
| __raw_writel(PM_COLD_CONFIG, base + AON_CTRL_PM_CTRL); |
| (void)__raw_readl(base + AON_CTRL_PM_CTRL); |
| |
| __raw_writel((PM_COLD_CONFIG | PM_PWR_DOWN), base + |
| AON_CTRL_PM_CTRL); |
| (void)__raw_readl(base + AON_CTRL_PM_CTRL); |
| |
| __asm__ __volatile__( |
| " wait\n" |
| : : : "memory"); |
| } |
| |
| static int brcmstb_pm_s3(void) |
| { |
| struct brcm_pm_s3_context s3_context; |
| void __iomem *memc_arb_base; |
| unsigned long flags; |
| u32 tmp; |
| int i; |
| |
| /* Prepare for s3 */ |
| AON_SAVE_SRAM(ctrl.aon_sram_base, 0, BRCMSTB_S3_MAGIC); |
| AON_SAVE_SRAM(ctrl.aon_sram_base, 1, (u32)&s3_reentry); |
| AON_SAVE_SRAM(ctrl.aon_sram_base, 2, 0); |
| |
| /* Clear RESET_HISTORY */ |
| tmp = __raw_readl(ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL); |
| tmp &= ~CLEAR_RESET_MASK; |
| __raw_writel(tmp, ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL); |
| |
| local_irq_save(flags); |
| |
| /* Inhibit DDR_RSTb pulse for both MMCs*/ |
| for (i = 0; i < ctrl.num_memc; i++) { |
| tmp = __raw_readl(ctrl.memcs[i].ddr_phy_base + |
| DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); |
| |
| tmp &= ~0x0f; |
| __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base + |
| DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); |
| tmp |= (0x05 | BIT(5)); |
| __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base + |
| DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); |
| } |
| |
| /* Save CP0 context */ |
| brcm_pm_save_cp0_context(&s3_context); |
| |
| /* Save RTS(skip debug register) */ |
| memc_arb_base = ctrl.memcs[0].arb_base + 4; |
| for (i = 0; i < NUM_MEMC_CLIENTS; i++) { |
| s3_context.memc0_rts[i] = __raw_readl(memc_arb_base); |
| memc_arb_base += 4; |
| } |
| |
| /* Save I/O context */ |
| local_flush_tlb_all(); |
| _dma_cache_wback_inv(0, ~0); |
| |
| brcm_pm_do_s3(ctrl.aon_ctrl_base, current_cpu_data.dcache.linesz); |
| |
| /* CPU reconfiguration */ |
| local_flush_tlb_all(); |
| bmips_cpu_setup(); |
| cpumask_clear(&bmips_booted_mask); |
| |
| /* Restore RTS (skip debug register) */ |
| memc_arb_base = ctrl.memcs[0].arb_base + 4; |
| for (i = 0; i < NUM_MEMC_CLIENTS; i++) { |
| __raw_writel(s3_context.memc0_rts[i], memc_arb_base); |
| memc_arb_base += 4; |
| } |
| |
| /* restore CP0 context */ |
| brcm_pm_restore_cp0_context(&s3_context); |
| |
| local_irq_restore(flags); |
| |
| return 0; |
| } |
| |
| static int brcmstb_pm_s2(void) |
| { |
| /* |
| * We need to pass 6 arguments to an assembly function. Lets avoid the |
| * stack and pass arguments in a explicit 4 byte array. The assembly |
| * code assumes all arguments are 4 bytes and arguments are ordered |
| * like so: |
| * |
| * 0: AON_CTRl base register |
| * 1: DDR_PHY base register |
| * 2: TIMERS base resgister |
| * 3: I-Cache line size |
| * 4: Restart vector address |
| * 5: Restart vector size |
| */ |
| u32 s2_params[6]; |
| |
| /* Prepare s2 parameters */ |
| s2_params[0] = (u32)ctrl.aon_ctrl_base; |
| s2_params[1] = (u32)ctrl.memcs[0].ddr_phy_base; |
| s2_params[2] = (u32)ctrl.timers_base; |
| s2_params[3] = (u32)current_cpu_data.icache.linesz; |
| s2_params[4] = (u32)BMIPS_WARM_RESTART_VEC; |
| s2_params[5] = (u32)(bmips_smp_int_vec_end - |
| bmips_smp_int_vec); |
| |
| /* Drop to standby */ |
| brcm_pm_do_s2(s2_params); |
| |
| return 0; |
| } |
| |
| static int brcmstb_pm_standby(bool deep_standby) |
| { |
| brcmstb_pm_handshake(); |
| |
| /* Send IRQs to BMIPS_WARM_RESTART_VEC */ |
| clear_c0_cause(CAUSEF_IV); |
| irq_disable_hazard(); |
| set_c0_status(ST0_BEV); |
| irq_disable_hazard(); |
| |
| if (deep_standby) |
| brcmstb_pm_s3(); |
| else |
| brcmstb_pm_s2(); |
| |
| /* Send IRQs to normal runtime vectors */ |
| clear_c0_status(ST0_BEV); |
| irq_disable_hazard(); |
| set_c0_cause(CAUSEF_IV); |
| irq_disable_hazard(); |
| |
| return 0; |
| } |
| |
| static int brcmstb_pm_enter(suspend_state_t state) |
| { |
| int ret = -EINVAL; |
| |
| switch (state) { |
| case PM_SUSPEND_STANDBY: |
| ret = brcmstb_pm_standby(false); |
| break; |
| case PM_SUSPEND_MEM: |
| ret = brcmstb_pm_standby(true); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int brcmstb_pm_valid(suspend_state_t state) |
| { |
| switch (state) { |
| case PM_SUSPEND_STANDBY: |
| return true; |
| case PM_SUSPEND_MEM: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct platform_suspend_ops brcmstb_pm_ops = { |
| .enter = brcmstb_pm_enter, |
| .valid = brcmstb_pm_valid, |
| }; |
| |
| static const struct of_device_id aon_ctrl_dt_ids[] = { |
| { .compatible = "brcm,brcmstb-aon-ctrl" }, |
| { /* sentinel */ } |
| }; |
| |
| static const struct of_device_id ddr_phy_dt_ids[] = { |
| { .compatible = "brcm,brcmstb-ddr-phy" }, |
| { /* sentinel */ } |
| }; |
| |
| static const struct of_device_id arb_dt_ids[] = { |
| { .compatible = "brcm,brcmstb-memc-arb" }, |
| { /* sentinel */ } |
| }; |
| |
| static const struct of_device_id timers_ids[] = { |
| { .compatible = "brcm,brcmstb-timers" }, |
| { /* sentinel */ } |
| }; |
| |
| static inline void __iomem *brcmstb_ioremap_node(struct device_node *dn, |
| int index) |
| { |
| return of_io_request_and_map(dn, index, dn->full_name); |
| } |
| |
| static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches, |
| int index, const void **ofdata) |
| { |
| struct device_node *dn; |
| const struct of_device_id *match; |
| |
| dn = of_find_matching_node_and_match(NULL, matches, &match); |
| if (!dn) |
| return ERR_PTR(-EINVAL); |
| |
| if (ofdata) |
| *ofdata = match->data; |
| |
| return brcmstb_ioremap_node(dn, index); |
| } |
| |
| static int brcmstb_pm_init(void) |
| { |
| struct device_node *dn; |
| void __iomem *base; |
| int i; |
| |
| /* AON ctrl registers */ |
| base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL); |
| if (IS_ERR(base)) { |
| pr_err("error mapping AON_CTRL\n"); |
| goto aon_err; |
| } |
| ctrl.aon_ctrl_base = base; |
| |
| /* AON SRAM registers */ |
| base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL); |
| if (IS_ERR(base)) { |
| pr_err("error mapping AON_SRAM\n"); |
| goto sram_err; |
| } |
| ctrl.aon_sram_base = base; |
| |
| ctrl.num_memc = 0; |
| /* Map MEMC DDR PHY registers */ |
| for_each_matching_node(dn, ddr_phy_dt_ids) { |
| i = ctrl.num_memc; |
| if (i >= MAX_NUM_MEMC) { |
| pr_warn("Too many MEMCs (max %d)\n", MAX_NUM_MEMC); |
| break; |
| } |
| base = brcmstb_ioremap_node(dn, 0); |
| if (IS_ERR(base)) |
| goto ddr_err; |
| |
| ctrl.memcs[i].ddr_phy_base = base; |
| ctrl.num_memc++; |
| } |
| |
| /* MEMC ARB registers */ |
| base = brcmstb_ioremap_match(arb_dt_ids, 0, NULL); |
| if (IS_ERR(base)) { |
| pr_err("error mapping MEMC ARB\n"); |
| goto ddr_err; |
| } |
| ctrl.memcs[0].arb_base = base; |
| |
| /* Timer registers */ |
| base = brcmstb_ioremap_match(timers_ids, 0, NULL); |
| if (IS_ERR(base)) { |
| pr_err("error mapping timers\n"); |
| goto tmr_err; |
| } |
| ctrl.timers_base = base; |
| |
| /* s3 cold boot aka s5 */ |
| pm_power_off = brcmstb_pm_s5; |
| |
| suspend_set_ops(&brcmstb_pm_ops); |
| |
| return 0; |
| |
| tmr_err: |
| iounmap(ctrl.memcs[0].arb_base); |
| ddr_err: |
| for (i = 0; i < ctrl.num_memc; i++) |
| iounmap(ctrl.memcs[i].ddr_phy_base); |
| |
| iounmap(ctrl.aon_sram_base); |
| sram_err: |
| iounmap(ctrl.aon_ctrl_base); |
| aon_err: |
| return PTR_ERR(base); |
| } |
| arch_initcall(brcmstb_pm_init); |