| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Driver for 93xx46 EEPROMs |
| * |
| * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/kernel.h> |
| #include <linux/log2.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| #include <linux/nvmem-provider.h> |
| #include <linux/eeprom_93xx46.h> |
| |
| #define OP_START 0x4 |
| #define OP_WRITE (OP_START | 0x1) |
| #define OP_READ (OP_START | 0x2) |
| #define ADDR_EWDS 0x00 |
| #define ADDR_ERAL 0x20 |
| #define ADDR_EWEN 0x30 |
| |
| struct eeprom_93xx46_devtype_data { |
| unsigned int quirks; |
| unsigned char flags; |
| }; |
| |
| static const struct eeprom_93xx46_devtype_data at93c46_data = { |
| .flags = EE_SIZE1K, |
| }; |
| |
| static const struct eeprom_93xx46_devtype_data at93c56_data = { |
| .flags = EE_SIZE2K, |
| }; |
| |
| static const struct eeprom_93xx46_devtype_data at93c66_data = { |
| .flags = EE_SIZE4K, |
| }; |
| |
| static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = { |
| .flags = EE_SIZE1K, |
| .quirks = EEPROM_93XX46_QUIRK_SINGLE_WORD_READ | |
| EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH, |
| }; |
| |
| static const struct eeprom_93xx46_devtype_data microchip_93lc46b_data = { |
| .flags = EE_SIZE1K, |
| .quirks = EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE, |
| }; |
| |
| struct eeprom_93xx46_dev { |
| struct spi_device *spi; |
| struct eeprom_93xx46_platform_data *pdata; |
| struct mutex lock; |
| struct nvmem_config nvmem_config; |
| struct nvmem_device *nvmem; |
| int addrlen; |
| int size; |
| }; |
| |
| static inline bool has_quirk_single_word_read(struct eeprom_93xx46_dev *edev) |
| { |
| return edev->pdata->quirks & EEPROM_93XX46_QUIRK_SINGLE_WORD_READ; |
| } |
| |
| static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev) |
| { |
| return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH; |
| } |
| |
| static inline bool has_quirk_extra_read_cycle(struct eeprom_93xx46_dev *edev) |
| { |
| return edev->pdata->quirks & EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE; |
| } |
| |
| static int eeprom_93xx46_read(void *priv, unsigned int off, |
| void *val, size_t count) |
| { |
| struct eeprom_93xx46_dev *edev = priv; |
| char *buf = val; |
| int err = 0; |
| int bits; |
| |
| if (unlikely(off >= edev->size)) |
| return 0; |
| if ((off + count) > edev->size) |
| count = edev->size - off; |
| if (unlikely(!count)) |
| return count; |
| |
| mutex_lock(&edev->lock); |
| |
| if (edev->pdata->prepare) |
| edev->pdata->prepare(edev); |
| |
| /* The opcode in front of the address is three bits. */ |
| bits = edev->addrlen + 3; |
| |
| while (count) { |
| struct spi_message m; |
| struct spi_transfer t[2] = { { 0 } }; |
| u16 cmd_addr = OP_READ << edev->addrlen; |
| size_t nbytes = count; |
| |
| if (edev->pdata->flags & EE_ADDR8) { |
| cmd_addr |= off; |
| if (has_quirk_single_word_read(edev)) |
| nbytes = 1; |
| } else { |
| cmd_addr |= (off >> 1); |
| if (has_quirk_single_word_read(edev)) |
| nbytes = 2; |
| } |
| |
| dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n", |
| cmd_addr, edev->spi->max_speed_hz); |
| |
| if (has_quirk_extra_read_cycle(edev)) { |
| cmd_addr <<= 1; |
| bits += 1; |
| } |
| |
| spi_message_init(&m); |
| |
| t[0].tx_buf = (char *)&cmd_addr; |
| t[0].len = 2; |
| t[0].bits_per_word = bits; |
| spi_message_add_tail(&t[0], &m); |
| |
| t[1].rx_buf = buf; |
| t[1].len = count; |
| t[1].bits_per_word = 8; |
| spi_message_add_tail(&t[1], &m); |
| |
| err = spi_sync(edev->spi, &m); |
| /* have to wait at least Tcsl ns */ |
| ndelay(250); |
| |
| if (err) { |
| dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n", |
| nbytes, (int)off, err); |
| break; |
| } |
| |
| buf += nbytes; |
| off += nbytes; |
| count -= nbytes; |
| } |
| |
| if (edev->pdata->finish) |
| edev->pdata->finish(edev); |
| |
| mutex_unlock(&edev->lock); |
| |
| return err; |
| } |
| |
| static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on) |
| { |
| struct spi_message m; |
| struct spi_transfer t; |
| int bits, ret; |
| u16 cmd_addr; |
| |
| /* The opcode in front of the address is three bits. */ |
| bits = edev->addrlen + 3; |
| |
| cmd_addr = OP_START << edev->addrlen; |
| if (edev->pdata->flags & EE_ADDR8) |
| cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << 1; |
| else |
| cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS); |
| |
| if (has_quirk_instruction_length(edev)) { |
| cmd_addr <<= 2; |
| bits += 2; |
| } |
| |
| dev_dbg(&edev->spi->dev, "ew%s cmd 0x%04x, %d bits\n", |
| is_on ? "en" : "ds", cmd_addr, bits); |
| |
| spi_message_init(&m); |
| memset(&t, 0, sizeof(t)); |
| |
| t.tx_buf = &cmd_addr; |
| t.len = 2; |
| t.bits_per_word = bits; |
| spi_message_add_tail(&t, &m); |
| |
| mutex_lock(&edev->lock); |
| |
| if (edev->pdata->prepare) |
| edev->pdata->prepare(edev); |
| |
| ret = spi_sync(edev->spi, &m); |
| /* have to wait at least Tcsl ns */ |
| ndelay(250); |
| if (ret) |
| dev_err(&edev->spi->dev, "erase/write %sable error %d\n", |
| is_on ? "en" : "dis", ret); |
| |
| if (edev->pdata->finish) |
| edev->pdata->finish(edev); |
| |
| mutex_unlock(&edev->lock); |
| return ret; |
| } |
| |
| static ssize_t |
| eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev, |
| const char *buf, unsigned off) |
| { |
| struct spi_message m; |
| struct spi_transfer t[2]; |
| int bits, data_len, ret; |
| u16 cmd_addr; |
| |
| if (unlikely(off >= edev->size)) |
| return -EINVAL; |
| |
| /* The opcode in front of the address is three bits. */ |
| bits = edev->addrlen + 3; |
| |
| cmd_addr = OP_WRITE << edev->addrlen; |
| |
| if (edev->pdata->flags & EE_ADDR8) { |
| cmd_addr |= off; |
| data_len = 1; |
| } else { |
| cmd_addr |= (off >> 1); |
| data_len = 2; |
| } |
| |
| dev_dbg(&edev->spi->dev, "write cmd 0x%x\n", cmd_addr); |
| |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| |
| t[0].tx_buf = (char *)&cmd_addr; |
| t[0].len = 2; |
| t[0].bits_per_word = bits; |
| spi_message_add_tail(&t[0], &m); |
| |
| t[1].tx_buf = buf; |
| t[1].len = data_len; |
| t[1].bits_per_word = 8; |
| spi_message_add_tail(&t[1], &m); |
| |
| ret = spi_sync(edev->spi, &m); |
| /* have to wait program cycle time Twc ms */ |
| mdelay(6); |
| return ret; |
| } |
| |
| static int eeprom_93xx46_write(void *priv, unsigned int off, |
| void *val, size_t count) |
| { |
| struct eeprom_93xx46_dev *edev = priv; |
| char *buf = val; |
| int i, ret, step = 1; |
| |
| if (unlikely(off >= edev->size)) |
| return -EFBIG; |
| if ((off + count) > edev->size) |
| count = edev->size - off; |
| if (unlikely(!count)) |
| return count; |
| |
| /* only write even number of bytes on 16-bit devices */ |
| if (edev->pdata->flags & EE_ADDR16) { |
| step = 2; |
| count &= ~1; |
| } |
| |
| /* erase/write enable */ |
| ret = eeprom_93xx46_ew(edev, 1); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&edev->lock); |
| |
| if (edev->pdata->prepare) |
| edev->pdata->prepare(edev); |
| |
| for (i = 0; i < count; i += step) { |
| ret = eeprom_93xx46_write_word(edev, &buf[i], off + i); |
| if (ret) { |
| dev_err(&edev->spi->dev, "write failed at %d: %d\n", |
| (int)off + i, ret); |
| break; |
| } |
| } |
| |
| if (edev->pdata->finish) |
| edev->pdata->finish(edev); |
| |
| mutex_unlock(&edev->lock); |
| |
| /* erase/write disable */ |
| eeprom_93xx46_ew(edev, 0); |
| return ret; |
| } |
| |
| static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev) |
| { |
| struct eeprom_93xx46_platform_data *pd = edev->pdata; |
| struct spi_message m; |
| struct spi_transfer t; |
| int bits, ret; |
| u16 cmd_addr; |
| |
| /* The opcode in front of the address is three bits. */ |
| bits = edev->addrlen + 3; |
| |
| cmd_addr = OP_START << edev->addrlen; |
| if (edev->pdata->flags & EE_ADDR8) |
| cmd_addr |= ADDR_ERAL << 1; |
| else |
| cmd_addr |= ADDR_ERAL; |
| |
| if (has_quirk_instruction_length(edev)) { |
| cmd_addr <<= 2; |
| bits += 2; |
| } |
| |
| dev_dbg(&edev->spi->dev, "eral cmd 0x%04x, %d bits\n", cmd_addr, bits); |
| |
| spi_message_init(&m); |
| memset(&t, 0, sizeof(t)); |
| |
| t.tx_buf = &cmd_addr; |
| t.len = 2; |
| t.bits_per_word = bits; |
| spi_message_add_tail(&t, &m); |
| |
| mutex_lock(&edev->lock); |
| |
| if (edev->pdata->prepare) |
| edev->pdata->prepare(edev); |
| |
| ret = spi_sync(edev->spi, &m); |
| if (ret) |
| dev_err(&edev->spi->dev, "erase error %d\n", ret); |
| /* have to wait erase cycle time Tec ms */ |
| mdelay(6); |
| |
| if (pd->finish) |
| pd->finish(edev); |
| |
| mutex_unlock(&edev->lock); |
| return ret; |
| } |
| |
| static ssize_t eeprom_93xx46_store_erase(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct eeprom_93xx46_dev *edev = dev_get_drvdata(dev); |
| int erase = 0, ret; |
| |
| sscanf(buf, "%d", &erase); |
| if (erase) { |
| ret = eeprom_93xx46_ew(edev, 1); |
| if (ret) |
| return ret; |
| ret = eeprom_93xx46_eral(edev); |
| if (ret) |
| return ret; |
| ret = eeprom_93xx46_ew(edev, 0); |
| if (ret) |
| return ret; |
| } |
| return count; |
| } |
| static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase); |
| |
| static void select_assert(void *context) |
| { |
| struct eeprom_93xx46_dev *edev = context; |
| |
| gpiod_set_value_cansleep(edev->pdata->select, 1); |
| } |
| |
| static void select_deassert(void *context) |
| { |
| struct eeprom_93xx46_dev *edev = context; |
| |
| gpiod_set_value_cansleep(edev->pdata->select, 0); |
| } |
| |
| static const struct of_device_id eeprom_93xx46_of_table[] = { |
| { .compatible = "eeprom-93xx46", .data = &at93c46_data, }, |
| { .compatible = "atmel,at93c46", .data = &at93c46_data, }, |
| { .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, }, |
| { .compatible = "atmel,at93c56", .data = &at93c56_data, }, |
| { .compatible = "atmel,at93c66", .data = &at93c66_data, }, |
| { .compatible = "microchip,93lc46b", .data = µchip_93lc46b_data, }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); |
| |
| static int eeprom_93xx46_probe_dt(struct spi_device *spi) |
| { |
| const struct of_device_id *of_id = |
| of_match_device(eeprom_93xx46_of_table, &spi->dev); |
| struct device_node *np = spi->dev.of_node; |
| struct eeprom_93xx46_platform_data *pd; |
| u32 tmp; |
| int ret; |
| |
| pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL); |
| if (!pd) |
| return -ENOMEM; |
| |
| ret = of_property_read_u32(np, "data-size", &tmp); |
| if (ret < 0) { |
| dev_err(&spi->dev, "data-size property not found\n"); |
| return ret; |
| } |
| |
| if (tmp == 8) { |
| pd->flags |= EE_ADDR8; |
| } else if (tmp == 16) { |
| pd->flags |= EE_ADDR16; |
| } else { |
| dev_err(&spi->dev, "invalid data-size (%d)\n", tmp); |
| return -EINVAL; |
| } |
| |
| if (of_property_read_bool(np, "read-only")) |
| pd->flags |= EE_READONLY; |
| |
| pd->select = devm_gpiod_get_optional(&spi->dev, "select", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(pd->select)) |
| return PTR_ERR(pd->select); |
| |
| pd->prepare = select_assert; |
| pd->finish = select_deassert; |
| gpiod_direction_output(pd->select, 0); |
| |
| if (of_id->data) { |
| const struct eeprom_93xx46_devtype_data *data = of_id->data; |
| |
| pd->quirks = data->quirks; |
| pd->flags |= data->flags; |
| } |
| |
| spi->dev.platform_data = pd; |
| |
| return 0; |
| } |
| |
| static int eeprom_93xx46_probe(struct spi_device *spi) |
| { |
| struct eeprom_93xx46_platform_data *pd; |
| struct eeprom_93xx46_dev *edev; |
| int err; |
| |
| if (spi->dev.of_node) { |
| err = eeprom_93xx46_probe_dt(spi); |
| if (err < 0) |
| return err; |
| } |
| |
| pd = spi->dev.platform_data; |
| if (!pd) { |
| dev_err(&spi->dev, "missing platform data\n"); |
| return -ENODEV; |
| } |
| |
| edev = devm_kzalloc(&spi->dev, sizeof(*edev), GFP_KERNEL); |
| if (!edev) |
| return -ENOMEM; |
| |
| if (pd->flags & EE_SIZE1K) |
| edev->size = 128; |
| else if (pd->flags & EE_SIZE2K) |
| edev->size = 256; |
| else if (pd->flags & EE_SIZE4K) |
| edev->size = 512; |
| else { |
| dev_err(&spi->dev, "unspecified size\n"); |
| return -EINVAL; |
| } |
| |
| if (pd->flags & EE_ADDR8) |
| edev->addrlen = ilog2(edev->size); |
| else if (pd->flags & EE_ADDR16) |
| edev->addrlen = ilog2(edev->size) - 1; |
| else { |
| dev_err(&spi->dev, "unspecified address type\n"); |
| return -EINVAL; |
| } |
| |
| mutex_init(&edev->lock); |
| |
| edev->spi = spi; |
| edev->pdata = pd; |
| |
| edev->nvmem_config.type = NVMEM_TYPE_EEPROM; |
| edev->nvmem_config.name = dev_name(&spi->dev); |
| edev->nvmem_config.dev = &spi->dev; |
| edev->nvmem_config.read_only = pd->flags & EE_READONLY; |
| edev->nvmem_config.root_only = true; |
| edev->nvmem_config.owner = THIS_MODULE; |
| edev->nvmem_config.compat = true; |
| edev->nvmem_config.base_dev = &spi->dev; |
| edev->nvmem_config.reg_read = eeprom_93xx46_read; |
| edev->nvmem_config.reg_write = eeprom_93xx46_write; |
| edev->nvmem_config.priv = edev; |
| edev->nvmem_config.stride = 4; |
| edev->nvmem_config.word_size = 1; |
| edev->nvmem_config.size = edev->size; |
| |
| edev->nvmem = devm_nvmem_register(&spi->dev, &edev->nvmem_config); |
| if (IS_ERR(edev->nvmem)) |
| return PTR_ERR(edev->nvmem); |
| |
| dev_info(&spi->dev, "%d-bit eeprom containing %d bytes %s\n", |
| (pd->flags & EE_ADDR8) ? 8 : 16, |
| edev->size, |
| (pd->flags & EE_READONLY) ? "(readonly)" : ""); |
| |
| if (!(pd->flags & EE_READONLY)) { |
| if (device_create_file(&spi->dev, &dev_attr_erase)) |
| dev_err(&spi->dev, "can't create erase interface\n"); |
| } |
| |
| spi_set_drvdata(spi, edev); |
| return 0; |
| } |
| |
| static int eeprom_93xx46_remove(struct spi_device *spi) |
| { |
| struct eeprom_93xx46_dev *edev = spi_get_drvdata(spi); |
| |
| if (!(edev->pdata->flags & EE_READONLY)) |
| device_remove_file(&spi->dev, &dev_attr_erase); |
| |
| return 0; |
| } |
| |
| static struct spi_driver eeprom_93xx46_driver = { |
| .driver = { |
| .name = "93xx46", |
| .of_match_table = of_match_ptr(eeprom_93xx46_of_table), |
| }, |
| .probe = eeprom_93xx46_probe, |
| .remove = eeprom_93xx46_remove, |
| }; |
| |
| module_spi_driver(eeprom_93xx46_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs"); |
| MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); |
| MODULE_ALIAS("spi:93xx46"); |
| MODULE_ALIAS("spi:eeprom-93xx46"); |
| MODULE_ALIAS("spi:93lc46b"); |