| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2017 Rockchip Electronics Co. Ltd. |
| * |
| * Author: Zheng Yang <zhengyang@rock-chips.com> |
| * Heiko Stuebner <heiko@sntech.de> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/nvmem-consumer.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/phy/phy.h> |
| #include <linux/slab.h> |
| |
| #define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l))) |
| |
| /* REG: 0x00 */ |
| #define RK3228_PRE_PLL_REFCLK_SEL_PCLK BIT(0) |
| /* REG: 0x01 */ |
| #define RK3228_BYPASS_RXSENSE_EN BIT(2) |
| #define RK3228_BYPASS_PWRON_EN BIT(1) |
| #define RK3228_BYPASS_PLLPD_EN BIT(0) |
| /* REG: 0x02 */ |
| #define RK3228_BYPASS_PDATA_EN BIT(4) |
| #define RK3228_PDATAEN_DISABLE BIT(0) |
| /* REG: 0x03 */ |
| #define RK3228_BYPASS_AUTO_TERM_RES_CAL BIT(7) |
| #define RK3228_AUTO_TERM_RES_CAL_SPEED_14_8(x) UPDATE(x, 6, 0) |
| /* REG: 0x04 */ |
| #define RK3228_AUTO_TERM_RES_CAL_SPEED_7_0(x) UPDATE(x, 7, 0) |
| /* REG: 0xaa */ |
| #define RK3228_POST_PLL_CTRL_MANUAL BIT(0) |
| /* REG: 0xe0 */ |
| #define RK3228_POST_PLL_POWER_DOWN BIT(5) |
| #define RK3228_PRE_PLL_POWER_DOWN BIT(4) |
| #define RK3228_RXSENSE_CLK_CH_ENABLE BIT(3) |
| #define RK3228_RXSENSE_DATA_CH2_ENABLE BIT(2) |
| #define RK3228_RXSENSE_DATA_CH1_ENABLE BIT(1) |
| #define RK3228_RXSENSE_DATA_CH0_ENABLE BIT(0) |
| /* REG: 0xe1 */ |
| #define RK3228_BANDGAP_ENABLE BIT(4) |
| #define RK3228_TMDS_DRIVER_ENABLE GENMASK(3, 0) |
| /* REG: 0xe2 */ |
| #define RK3228_PRE_PLL_FB_DIV_8_MASK BIT(7) |
| #define RK3228_PRE_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7) |
| #define RK3228_PCLK_VCO_DIV_5_MASK BIT(5) |
| #define RK3228_PCLK_VCO_DIV_5(x) UPDATE(x, 5, 5) |
| #define RK3228_PRE_PLL_PRE_DIV_MASK GENMASK(4, 0) |
| #define RK3228_PRE_PLL_PRE_DIV(x) UPDATE(x, 4, 0) |
| /* REG: 0xe3 */ |
| #define RK3228_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0) |
| /* REG: 0xe4 */ |
| #define RK3228_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5) |
| #define RK3228_PRE_PLL_PCLK_DIV_B_SHIFT 5 |
| #define RK3228_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5) |
| #define RK3228_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0) |
| #define RK3228_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0) |
| /* REG: 0xe5 */ |
| #define RK3228_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5) |
| #define RK3228_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5) |
| #define RK3228_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0) |
| #define RK3228_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0) |
| /* REG: 0xe6 */ |
| #define RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(5, 4) |
| #define RK3228_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 5, 4) |
| #define RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(3, 2) |
| #define RK3228_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 3, 2) |
| #define RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(1, 0) |
| #define RK3228_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 1, 0) |
| /* REG: 0xe8 */ |
| #define RK3228_PRE_PLL_LOCK_STATUS BIT(0) |
| /* REG: 0xe9 */ |
| #define RK3228_POST_PLL_POST_DIV_ENABLE UPDATE(3, 7, 6) |
| #define RK3228_POST_PLL_PRE_DIV_MASK GENMASK(4, 0) |
| #define RK3228_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0) |
| /* REG: 0xea */ |
| #define RK3228_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0) |
| /* REG: 0xeb */ |
| #define RK3228_POST_PLL_FB_DIV_8_MASK BIT(7) |
| #define RK3228_POST_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7) |
| #define RK3228_POST_PLL_POST_DIV_MASK GENMASK(5, 4) |
| #define RK3228_POST_PLL_POST_DIV(x) UPDATE(x, 5, 4) |
| #define RK3228_POST_PLL_LOCK_STATUS BIT(0) |
| /* REG: 0xee */ |
| #define RK3228_TMDS_CH_TA_ENABLE GENMASK(7, 4) |
| /* REG: 0xef */ |
| #define RK3228_TMDS_CLK_CH_TA(x) UPDATE(x, 7, 6) |
| #define RK3228_TMDS_DATA_CH2_TA(x) UPDATE(x, 5, 4) |
| #define RK3228_TMDS_DATA_CH1_TA(x) UPDATE(x, 3, 2) |
| #define RK3228_TMDS_DATA_CH0_TA(x) UPDATE(x, 1, 0) |
| /* REG: 0xf0 */ |
| #define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS_MASK GENMASK(5, 4) |
| #define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS(x) UPDATE(x, 5, 4) |
| #define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS_MASK GENMASK(3, 2) |
| #define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS(x) UPDATE(x, 3, 2) |
| #define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS_MASK GENMASK(1, 0) |
| #define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS(x) UPDATE(x, 1, 0) |
| /* REG: 0xf1 */ |
| #define RK3228_TMDS_CLK_CH_OUTPUT_SWING(x) UPDATE(x, 7, 4) |
| #define RK3228_TMDS_DATA_CH2_OUTPUT_SWING(x) UPDATE(x, 3, 0) |
| /* REG: 0xf2 */ |
| #define RK3228_TMDS_DATA_CH1_OUTPUT_SWING(x) UPDATE(x, 7, 4) |
| #define RK3228_TMDS_DATA_CH0_OUTPUT_SWING(x) UPDATE(x, 3, 0) |
| |
| /* REG: 0x01 */ |
| #define RK3328_BYPASS_RXSENSE_EN BIT(2) |
| #define RK3328_BYPASS_POWERON_EN BIT(1) |
| #define RK3328_BYPASS_PLLPD_EN BIT(0) |
| /* REG: 0x02 */ |
| #define RK3328_INT_POL_HIGH BIT(7) |
| #define RK3328_BYPASS_PDATA_EN BIT(4) |
| #define RK3328_PDATA_EN BIT(0) |
| /* REG:0x05 */ |
| #define RK3328_INT_TMDS_CLK(x) UPDATE(x, 7, 4) |
| #define RK3328_INT_TMDS_D2(x) UPDATE(x, 3, 0) |
| /* REG:0x07 */ |
| #define RK3328_INT_TMDS_D1(x) UPDATE(x, 7, 4) |
| #define RK3328_INT_TMDS_D0(x) UPDATE(x, 3, 0) |
| /* for all RK3328_INT_TMDS_*, ESD_DET as defined in 0xc8-0xcb */ |
| #define RK3328_INT_AGND_LOW_PULSE_LOCKED BIT(3) |
| #define RK3328_INT_RXSENSE_LOW_PULSE_LOCKED BIT(2) |
| #define RK3328_INT_VSS_AGND_ESD_DET BIT(1) |
| #define RK3328_INT_AGND_VSS_ESD_DET BIT(0) |
| /* REG: 0xa0 */ |
| #define RK3328_PCLK_VCO_DIV_5_MASK BIT(1) |
| #define RK3328_PCLK_VCO_DIV_5(x) UPDATE(x, 1, 1) |
| #define RK3328_PRE_PLL_POWER_DOWN BIT(0) |
| /* REG: 0xa1 */ |
| #define RK3328_PRE_PLL_PRE_DIV_MASK GENMASK(5, 0) |
| #define RK3328_PRE_PLL_PRE_DIV(x) UPDATE(x, 5, 0) |
| /* REG: 0xa2 */ |
| /* unset means center spread */ |
| #define RK3328_SPREAD_SPECTRUM_MOD_DOWN BIT(7) |
| #define RK3328_SPREAD_SPECTRUM_MOD_DISABLE BIT(6) |
| #define RK3328_PRE_PLL_FRAC_DIV_DISABLE UPDATE(3, 5, 4) |
| #define RK3328_PRE_PLL_FB_DIV_11_8_MASK GENMASK(3, 0) |
| #define RK3328_PRE_PLL_FB_DIV_11_8(x) UPDATE((x) >> 8, 3, 0) |
| /* REG: 0xa3 */ |
| #define RK3328_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0) |
| /* REG: 0xa4*/ |
| #define RK3328_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(1, 0) |
| #define RK3328_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 1, 0) |
| #define RK3328_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(3, 2) |
| #define RK3328_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 3, 2) |
| #define RK3328_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(5, 4) |
| #define RK3328_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 5, 4) |
| /* REG: 0xa5 */ |
| #define RK3328_PRE_PLL_PCLK_DIV_B_SHIFT 5 |
| #define RK3328_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5) |
| #define RK3328_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5) |
| #define RK3328_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0) |
| #define RK3328_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0) |
| /* REG: 0xa6 */ |
| #define RK3328_PRE_PLL_PCLK_DIV_C_SHIFT 5 |
| #define RK3328_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5) |
| #define RK3328_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5) |
| #define RK3328_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0) |
| #define RK3328_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0) |
| /* REG: 0xa9 */ |
| #define RK3328_PRE_PLL_LOCK_STATUS BIT(0) |
| /* REG: 0xaa */ |
| #define RK3328_POST_PLL_POST_DIV_ENABLE GENMASK(3, 2) |
| #define RK3328_POST_PLL_REFCLK_SEL_TMDS BIT(1) |
| #define RK3328_POST_PLL_POWER_DOWN BIT(0) |
| /* REG:0xab */ |
| #define RK3328_POST_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7) |
| #define RK3328_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0) |
| /* REG: 0xac */ |
| #define RK3328_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0) |
| /* REG: 0xad */ |
| #define RK3328_POST_PLL_POST_DIV_MASK GENMASK(1, 0) |
| #define RK3328_POST_PLL_POST_DIV_2 0x0 |
| #define RK3328_POST_PLL_POST_DIV_4 0x1 |
| #define RK3328_POST_PLL_POST_DIV_8 0x3 |
| /* REG: 0xaf */ |
| #define RK3328_POST_PLL_LOCK_STATUS BIT(0) |
| /* REG: 0xb0 */ |
| #define RK3328_BANDGAP_ENABLE BIT(2) |
| /* REG: 0xb2 */ |
| #define RK3328_TMDS_CLK_DRIVER_EN BIT(3) |
| #define RK3328_TMDS_D2_DRIVER_EN BIT(2) |
| #define RK3328_TMDS_D1_DRIVER_EN BIT(1) |
| #define RK3328_TMDS_D0_DRIVER_EN BIT(0) |
| #define RK3328_TMDS_DRIVER_ENABLE (RK3328_TMDS_CLK_DRIVER_EN | \ |
| RK3328_TMDS_D2_DRIVER_EN | \ |
| RK3328_TMDS_D1_DRIVER_EN | \ |
| RK3328_TMDS_D0_DRIVER_EN) |
| /* REG:0xc5 */ |
| #define RK3328_BYPASS_TERM_RESISTOR_CALIB BIT(7) |
| #define RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(x) UPDATE((x) >> 8, 6, 0) |
| /* REG:0xc6 */ |
| #define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 0) |
| /* REG:0xc7 */ |
| #define RK3328_TERM_RESISTOR_50 UPDATE(0, 2, 1) |
| #define RK3328_TERM_RESISTOR_62_5 UPDATE(1, 2, 1) |
| #define RK3328_TERM_RESISTOR_75 UPDATE(2, 2, 1) |
| #define RK3328_TERM_RESISTOR_100 UPDATE(3, 2, 1) |
| /* REG 0xc8 - 0xcb */ |
| #define RK3328_ESD_DETECT_MASK GENMASK(7, 6) |
| #define RK3328_ESD_DETECT_340MV (0x0 << 6) |
| #define RK3328_ESD_DETECT_280MV (0x1 << 6) |
| #define RK3328_ESD_DETECT_260MV (0x2 << 6) |
| #define RK3328_ESD_DETECT_240MV (0x3 << 6) |
| /* resistors can be used in parallel */ |
| #define RK3328_TMDS_TERM_RESIST_MASK GENMASK(5, 0) |
| #define RK3328_TMDS_TERM_RESIST_75 BIT(5) |
| #define RK3328_TMDS_TERM_RESIST_150 BIT(4) |
| #define RK3328_TMDS_TERM_RESIST_300 BIT(3) |
| #define RK3328_TMDS_TERM_RESIST_600 BIT(2) |
| #define RK3328_TMDS_TERM_RESIST_1000 BIT(1) |
| #define RK3328_TMDS_TERM_RESIST_2000 BIT(0) |
| /* REG: 0xd1 */ |
| #define RK3328_PRE_PLL_FRAC_DIV_23_16(x) UPDATE((x) >> 16, 7, 0) |
| /* REG: 0xd2 */ |
| #define RK3328_PRE_PLL_FRAC_DIV_15_8(x) UPDATE((x) >> 8, 7, 0) |
| /* REG: 0xd3 */ |
| #define RK3328_PRE_PLL_FRAC_DIV_7_0(x) UPDATE(x, 7, 0) |
| |
| struct inno_hdmi_phy_drv_data; |
| |
| struct inno_hdmi_phy { |
| struct device *dev; |
| struct regmap *regmap; |
| int irq; |
| |
| struct phy *phy; |
| struct clk *sysclk; |
| struct clk *refoclk; |
| struct clk *refpclk; |
| |
| /* platform data */ |
| const struct inno_hdmi_phy_drv_data *plat_data; |
| int chip_version; |
| |
| /* clk provider */ |
| struct clk_hw hw; |
| struct clk *phyclk; |
| unsigned long pixclock; |
| }; |
| |
| struct pre_pll_config { |
| unsigned long pixclock; |
| unsigned long tmdsclock; |
| u8 prediv; |
| u16 fbdiv; |
| u8 tmds_div_a; |
| u8 tmds_div_b; |
| u8 tmds_div_c; |
| u8 pclk_div_a; |
| u8 pclk_div_b; |
| u8 pclk_div_c; |
| u8 pclk_div_d; |
| u8 vco_div_5_en; |
| u32 fracdiv; |
| }; |
| |
| struct post_pll_config { |
| unsigned long tmdsclock; |
| u8 prediv; |
| u16 fbdiv; |
| u8 postdiv; |
| u8 version; |
| }; |
| |
| struct phy_config { |
| unsigned long tmdsclock; |
| u8 regs[14]; |
| }; |
| |
| struct inno_hdmi_phy_ops { |
| int (*init)(struct inno_hdmi_phy *inno); |
| int (*power_on)(struct inno_hdmi_phy *inno, |
| const struct post_pll_config *cfg, |
| const struct phy_config *phy_cfg); |
| void (*power_off)(struct inno_hdmi_phy *inno); |
| }; |
| |
| struct inno_hdmi_phy_drv_data { |
| const struct inno_hdmi_phy_ops *ops; |
| const struct clk_ops *clk_ops; |
| const struct phy_config *phy_cfg_table; |
| }; |
| |
| static const struct pre_pll_config pre_pll_cfg_table[] = { |
| { 27000000, 27000000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0}, |
| { 27000000, 33750000, 1, 90, 1, 3, 3, 10, 3, 3, 4, 0, 0}, |
| { 40000000, 40000000, 1, 80, 2, 2, 2, 12, 2, 2, 2, 0, 0}, |
| { 59341000, 59341000, 1, 98, 3, 1, 2, 1, 3, 3, 4, 0, 0xE6AE6B}, |
| { 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0}, |
| { 59341000, 74176250, 1, 98, 0, 3, 3, 1, 3, 3, 4, 0, 0xE6AE6B}, |
| { 59400000, 74250000, 1, 99, 1, 2, 2, 1, 3, 3, 4, 0, 0}, |
| { 74176000, 74176000, 1, 98, 1, 2, 2, 1, 2, 3, 4, 0, 0xE6AE6B}, |
| { 74250000, 74250000, 1, 99, 1, 2, 2, 1, 2, 3, 4, 0, 0}, |
| { 74176000, 92720000, 4, 494, 1, 2, 2, 1, 3, 3, 4, 0, 0x816817}, |
| { 74250000, 92812500, 4, 495, 1, 2, 2, 1, 3, 3, 4, 0, 0}, |
| {148352000, 148352000, 1, 98, 1, 1, 1, 1, 2, 2, 2, 0, 0xE6AE6B}, |
| {148500000, 148500000, 1, 99, 1, 1, 1, 1, 2, 2, 2, 0, 0}, |
| {148352000, 185440000, 4, 494, 0, 2, 2, 1, 3, 2, 2, 0, 0x816817}, |
| {148500000, 185625000, 4, 495, 0, 2, 2, 1, 3, 2, 2, 0, 0}, |
| {296703000, 296703000, 1, 98, 0, 1, 1, 1, 0, 2, 2, 0, 0xE6AE6B}, |
| {297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0}, |
| {296703000, 370878750, 4, 494, 1, 2, 0, 1, 3, 1, 1, 0, 0x816817}, |
| {297000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 0, 0}, |
| {593407000, 296703500, 1, 98, 0, 1, 1, 1, 0, 2, 1, 0, 0xE6AE6B}, |
| {594000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 1, 0, 0}, |
| {593407000, 370879375, 4, 494, 1, 2, 0, 1, 3, 1, 1, 1, 0x816817}, |
| {594000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 1, 0}, |
| {593407000, 593407000, 1, 98, 0, 2, 0, 1, 0, 1, 1, 0, 0xE6AE6B}, |
| {594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0}, |
| { /* sentinel */ } |
| }; |
| |
| static const struct post_pll_config post_pll_cfg_table[] = { |
| {33750000, 1, 40, 8, 1}, |
| {33750000, 1, 80, 8, 2}, |
| {74250000, 1, 40, 8, 1}, |
| {74250000, 18, 80, 8, 2}, |
| {148500000, 2, 40, 4, 3}, |
| {297000000, 4, 40, 2, 3}, |
| {594000000, 8, 40, 1, 3}, |
| { /* sentinel */ } |
| }; |
| |
| /* phy tuning values for an undocumented set of registers */ |
| static const struct phy_config rk3228_phy_cfg[] = { |
| { 165000000, { |
| 0xaa, 0x00, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| }, |
| }, { |
| 340000000, { |
| 0xaa, 0x15, 0x6a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| }, |
| }, { |
| 594000000, { |
| 0xaa, 0x15, 0x7a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| }, |
| }, { /* sentinel */ }, |
| }; |
| |
| /* phy tuning values for an undocumented set of registers */ |
| static const struct phy_config rk3328_phy_cfg[] = { |
| { 165000000, { |
| 0x07, 0x0a, 0x0a, 0x0a, 0x00, 0x00, 0x08, 0x08, 0x08, |
| 0x00, 0xac, 0xcc, 0xcc, 0xcc, |
| }, |
| }, { |
| 340000000, { |
| 0x0b, 0x0d, 0x0d, 0x0d, 0x07, 0x15, 0x08, 0x08, 0x08, |
| 0x3f, 0xac, 0xcc, 0xcd, 0xdd, |
| }, |
| }, { |
| 594000000, { |
| 0x10, 0x1a, 0x1a, 0x1a, 0x07, 0x15, 0x08, 0x08, 0x08, |
| 0x00, 0xac, 0xcc, 0xcc, 0xcc, |
| }, |
| }, { /* sentinel */ }, |
| }; |
| |
| static inline struct inno_hdmi_phy *to_inno_hdmi_phy(struct clk_hw *hw) |
| { |
| return container_of(hw, struct inno_hdmi_phy, hw); |
| } |
| |
| /* |
| * The register description of the IP block does not use any distinct names |
| * but instead the databook simply numbers the registers in one-increments. |
| * As the registers are obviously 32bit sized, the inno_* functions |
| * translate the databook register names to the actual registers addresses. |
| */ |
| static inline void inno_write(struct inno_hdmi_phy *inno, u32 reg, u8 val) |
| { |
| regmap_write(inno->regmap, reg * 4, val); |
| } |
| |
| static inline u8 inno_read(struct inno_hdmi_phy *inno, u32 reg) |
| { |
| u32 val; |
| |
| regmap_read(inno->regmap, reg * 4, &val); |
| |
| return val; |
| } |
| |
| static inline void inno_update_bits(struct inno_hdmi_phy *inno, u8 reg, |
| u8 mask, u8 val) |
| { |
| regmap_update_bits(inno->regmap, reg * 4, mask, val); |
| } |
| |
| #define inno_poll(inno, reg, val, cond, sleep_us, timeout_us) \ |
| regmap_read_poll_timeout((inno)->regmap, (reg) * 4, val, cond, \ |
| sleep_us, timeout_us) |
| |
| static unsigned long inno_hdmi_phy_get_tmdsclk(struct inno_hdmi_phy *inno, |
| unsigned long rate) |
| { |
| int bus_width = phy_get_bus_width(inno->phy); |
| |
| switch (bus_width) { |
| case 4: |
| case 5: |
| case 6: |
| case 10: |
| case 12: |
| case 16: |
| return (u64)rate * bus_width / 8; |
| default: |
| return rate; |
| } |
| } |
| |
| static irqreturn_t inno_hdmi_phy_rk3328_hardirq(int irq, void *dev_id) |
| { |
| struct inno_hdmi_phy *inno = dev_id; |
| int intr_stat1, intr_stat2, intr_stat3; |
| |
| intr_stat1 = inno_read(inno, 0x04); |
| intr_stat2 = inno_read(inno, 0x06); |
| intr_stat3 = inno_read(inno, 0x08); |
| |
| if (intr_stat1) |
| inno_write(inno, 0x04, intr_stat1); |
| if (intr_stat2) |
| inno_write(inno, 0x06, intr_stat2); |
| if (intr_stat3) |
| inno_write(inno, 0x08, intr_stat3); |
| |
| if (intr_stat1 || intr_stat2 || intr_stat3) |
| return IRQ_WAKE_THREAD; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t inno_hdmi_phy_rk3328_irq(int irq, void *dev_id) |
| { |
| struct inno_hdmi_phy *inno = dev_id; |
| |
| inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0); |
| usleep_range(10, 20); |
| inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int inno_hdmi_phy_power_on(struct phy *phy) |
| { |
| struct inno_hdmi_phy *inno = phy_get_drvdata(phy); |
| const struct post_pll_config *cfg = post_pll_cfg_table; |
| const struct phy_config *phy_cfg = inno->plat_data->phy_cfg_table; |
| unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, |
| inno->pixclock); |
| int ret; |
| |
| if (!tmdsclock) { |
| dev_err(inno->dev, "TMDS clock is zero!\n"); |
| return -EINVAL; |
| } |
| |
| if (!inno->plat_data->ops->power_on) |
| return -EINVAL; |
| |
| for (; cfg->tmdsclock != 0; cfg++) |
| if (tmdsclock <= cfg->tmdsclock && |
| cfg->version & inno->chip_version) |
| break; |
| |
| for (; phy_cfg->tmdsclock != 0; phy_cfg++) |
| if (tmdsclock <= phy_cfg->tmdsclock) |
| break; |
| |
| if (cfg->tmdsclock == 0 || phy_cfg->tmdsclock == 0) |
| return -EINVAL; |
| |
| dev_dbg(inno->dev, "Inno HDMI PHY Power On\n"); |
| |
| ret = clk_prepare_enable(inno->phyclk); |
| if (ret) |
| return ret; |
| |
| ret = inno->plat_data->ops->power_on(inno, cfg, phy_cfg); |
| if (ret) { |
| clk_disable_unprepare(inno->phyclk); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int inno_hdmi_phy_power_off(struct phy *phy) |
| { |
| struct inno_hdmi_phy *inno = phy_get_drvdata(phy); |
| |
| if (!inno->plat_data->ops->power_off) |
| return -EINVAL; |
| |
| inno->plat_data->ops->power_off(inno); |
| |
| clk_disable_unprepare(inno->phyclk); |
| |
| dev_dbg(inno->dev, "Inno HDMI PHY Power Off\n"); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops inno_hdmi_phy_ops = { |
| .owner = THIS_MODULE, |
| .power_on = inno_hdmi_phy_power_on, |
| .power_off = inno_hdmi_phy_power_off, |
| }; |
| |
| static const |
| struct pre_pll_config *inno_hdmi_phy_get_pre_pll_cfg(struct inno_hdmi_phy *inno, |
| unsigned long rate) |
| { |
| const struct pre_pll_config *cfg = pre_pll_cfg_table; |
| unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate); |
| |
| for (; cfg->pixclock != 0; cfg++) |
| if (cfg->pixclock == rate && cfg->tmdsclock == tmdsclock) |
| break; |
| |
| if (cfg->pixclock == 0) |
| return ERR_PTR(-EINVAL); |
| |
| return cfg; |
| } |
| |
| static int inno_hdmi_phy_rk3228_clk_is_prepared(struct clk_hw *hw) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| u8 status; |
| |
| status = inno_read(inno, 0xe0) & RK3228_PRE_PLL_POWER_DOWN; |
| return status ? 0 : 1; |
| } |
| |
| static int inno_hdmi_phy_rk3228_clk_prepare(struct clk_hw *hw) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| |
| inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0); |
| return 0; |
| } |
| |
| static void inno_hdmi_phy_rk3228_clk_unprepare(struct clk_hw *hw) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| |
| inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, |
| RK3228_PRE_PLL_POWER_DOWN); |
| } |
| |
| static |
| unsigned long inno_hdmi_phy_rk3228_clk_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| u8 nd, no_a, no_b, no_d; |
| u64 vco; |
| u16 nf; |
| |
| nd = inno_read(inno, 0xe2) & RK3228_PRE_PLL_PRE_DIV_MASK; |
| nf = (inno_read(inno, 0xe2) & RK3228_PRE_PLL_FB_DIV_8_MASK) << 1; |
| nf |= inno_read(inno, 0xe3); |
| vco = parent_rate * nf; |
| |
| if (inno_read(inno, 0xe2) & RK3228_PCLK_VCO_DIV_5_MASK) { |
| do_div(vco, nd * 5); |
| } else { |
| no_a = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_A_MASK; |
| if (!no_a) |
| no_a = 1; |
| no_b = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_B_MASK; |
| no_b >>= RK3228_PRE_PLL_PCLK_DIV_B_SHIFT; |
| no_b += 2; |
| no_d = inno_read(inno, 0xe5) & RK3228_PRE_PLL_PCLK_DIV_D_MASK; |
| |
| do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2)); |
| } |
| |
| inno->pixclock = vco; |
| |
| dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock); |
| |
| return vco; |
| } |
| |
| static long inno_hdmi_phy_rk3228_clk_round_rate(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| const struct pre_pll_config *cfg = pre_pll_cfg_table; |
| |
| rate = (rate / 1000) * 1000; |
| |
| for (; cfg->pixclock != 0; cfg++) |
| if (cfg->pixclock == rate && !cfg->fracdiv) |
| break; |
| |
| if (cfg->pixclock == 0) |
| return -EINVAL; |
| |
| return cfg->pixclock; |
| } |
| |
| static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| const struct pre_pll_config *cfg; |
| unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate); |
| u32 v; |
| int ret; |
| |
| dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n", |
| __func__, rate, tmdsclock); |
| |
| cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate); |
| if (IS_ERR(cfg)) |
| return PTR_ERR(cfg); |
| |
| /* Power down PRE-PLL */ |
| inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, |
| RK3228_PRE_PLL_POWER_DOWN); |
| |
| inno_update_bits(inno, 0xe2, RK3228_PRE_PLL_FB_DIV_8_MASK | |
| RK3228_PCLK_VCO_DIV_5_MASK | |
| RK3228_PRE_PLL_PRE_DIV_MASK, |
| RK3228_PRE_PLL_FB_DIV_8(cfg->fbdiv) | |
| RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en) | |
| RK3228_PRE_PLL_PRE_DIV(cfg->prediv)); |
| inno_write(inno, 0xe3, RK3228_PRE_PLL_FB_DIV_7_0(cfg->fbdiv)); |
| inno_update_bits(inno, 0xe4, RK3228_PRE_PLL_PCLK_DIV_B_MASK | |
| RK3228_PRE_PLL_PCLK_DIV_A_MASK, |
| RK3228_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b) | |
| RK3228_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a)); |
| inno_update_bits(inno, 0xe5, RK3228_PRE_PLL_PCLK_DIV_C_MASK | |
| RK3228_PRE_PLL_PCLK_DIV_D_MASK, |
| RK3228_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) | |
| RK3228_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d)); |
| inno_update_bits(inno, 0xe6, RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK | |
| RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK | |
| RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK, |
| RK3228_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) | |
| RK3228_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) | |
| RK3228_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b)); |
| |
| /* Power up PRE-PLL */ |
| inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0); |
| |
| /* Wait for Pre-PLL lock */ |
| ret = inno_poll(inno, 0xe8, v, v & RK3228_PRE_PLL_LOCK_STATUS, |
| 100, 100000); |
| if (ret) { |
| dev_err(inno->dev, "Pre-PLL locking failed\n"); |
| return ret; |
| } |
| |
| inno->pixclock = rate; |
| |
| return 0; |
| } |
| |
| static const struct clk_ops inno_hdmi_phy_rk3228_clk_ops = { |
| .prepare = inno_hdmi_phy_rk3228_clk_prepare, |
| .unprepare = inno_hdmi_phy_rk3228_clk_unprepare, |
| .is_prepared = inno_hdmi_phy_rk3228_clk_is_prepared, |
| .recalc_rate = inno_hdmi_phy_rk3228_clk_recalc_rate, |
| .round_rate = inno_hdmi_phy_rk3228_clk_round_rate, |
| .set_rate = inno_hdmi_phy_rk3228_clk_set_rate, |
| }; |
| |
| static int inno_hdmi_phy_rk3328_clk_is_prepared(struct clk_hw *hw) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| u8 status; |
| |
| status = inno_read(inno, 0xa0) & RK3328_PRE_PLL_POWER_DOWN; |
| return status ? 0 : 1; |
| } |
| |
| static int inno_hdmi_phy_rk3328_clk_prepare(struct clk_hw *hw) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| |
| inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0); |
| return 0; |
| } |
| |
| static void inno_hdmi_phy_rk3328_clk_unprepare(struct clk_hw *hw) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| |
| inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, |
| RK3328_PRE_PLL_POWER_DOWN); |
| } |
| |
| static |
| unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| unsigned long frac; |
| u8 nd, no_a, no_b, no_c, no_d; |
| u64 vco; |
| u16 nf; |
| |
| nd = inno_read(inno, 0xa1) & RK3328_PRE_PLL_PRE_DIV_MASK; |
| nf = ((inno_read(inno, 0xa2) & RK3328_PRE_PLL_FB_DIV_11_8_MASK) << 8); |
| nf |= inno_read(inno, 0xa3); |
| vco = parent_rate * nf; |
| |
| if (!(inno_read(inno, 0xa2) & RK3328_PRE_PLL_FRAC_DIV_DISABLE)) { |
| frac = inno_read(inno, 0xd3) | |
| (inno_read(inno, 0xd2) << 8) | |
| (inno_read(inno, 0xd1) << 16); |
| vco += DIV_ROUND_CLOSEST(parent_rate * frac, (1 << 24)); |
| } |
| |
| if (inno_read(inno, 0xa0) & RK3328_PCLK_VCO_DIV_5_MASK) { |
| do_div(vco, nd * 5); |
| } else { |
| no_a = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_A_MASK; |
| no_b = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_B_MASK; |
| no_b >>= RK3328_PRE_PLL_PCLK_DIV_B_SHIFT; |
| no_b += 2; |
| no_c = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_C_MASK; |
| no_c >>= RK3328_PRE_PLL_PCLK_DIV_C_SHIFT; |
| no_c = 1 << no_c; |
| no_d = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_D_MASK; |
| |
| do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2)); |
| } |
| |
| inno->pixclock = vco; |
| dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock); |
| |
| return vco; |
| } |
| |
| static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| const struct pre_pll_config *cfg = pre_pll_cfg_table; |
| |
| rate = (rate / 1000) * 1000; |
| |
| for (; cfg->pixclock != 0; cfg++) |
| if (cfg->pixclock == rate) |
| break; |
| |
| if (cfg->pixclock == 0) |
| return -EINVAL; |
| |
| return cfg->pixclock; |
| } |
| |
| static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); |
| const struct pre_pll_config *cfg; |
| unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate); |
| u32 val; |
| int ret; |
| |
| dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n", |
| __func__, rate, tmdsclock); |
| |
| cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate); |
| if (IS_ERR(cfg)) |
| return PTR_ERR(cfg); |
| |
| inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, |
| RK3328_PRE_PLL_POWER_DOWN); |
| |
| /* Configure pre-pll */ |
| inno_update_bits(inno, 0xa0, RK3228_PCLK_VCO_DIV_5_MASK, |
| RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en)); |
| inno_write(inno, 0xa1, RK3328_PRE_PLL_PRE_DIV(cfg->prediv)); |
| |
| val = RK3328_SPREAD_SPECTRUM_MOD_DISABLE; |
| if (!cfg->fracdiv) |
| val |= RK3328_PRE_PLL_FRAC_DIV_DISABLE; |
| inno_write(inno, 0xa2, RK3328_PRE_PLL_FB_DIV_11_8(cfg->fbdiv) | val); |
| inno_write(inno, 0xa3, RK3328_PRE_PLL_FB_DIV_7_0(cfg->fbdiv)); |
| inno_write(inno, 0xa5, RK3328_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a) | |
| RK3328_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b)); |
| inno_write(inno, 0xa6, RK3328_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) | |
| RK3328_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d)); |
| inno_write(inno, 0xa4, RK3328_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) | |
| RK3328_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) | |
| RK3328_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b)); |
| inno_write(inno, 0xd3, RK3328_PRE_PLL_FRAC_DIV_7_0(cfg->fracdiv)); |
| inno_write(inno, 0xd2, RK3328_PRE_PLL_FRAC_DIV_15_8(cfg->fracdiv)); |
| inno_write(inno, 0xd1, RK3328_PRE_PLL_FRAC_DIV_23_16(cfg->fracdiv)); |
| |
| inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0); |
| |
| /* Wait for Pre-PLL lock */ |
| ret = inno_poll(inno, 0xa9, val, val & RK3328_PRE_PLL_LOCK_STATUS, |
| 1000, 10000); |
| if (ret) { |
| dev_err(inno->dev, "Pre-PLL locking failed\n"); |
| return ret; |
| } |
| |
| inno->pixclock = rate; |
| |
| return 0; |
| } |
| |
| static const struct clk_ops inno_hdmi_phy_rk3328_clk_ops = { |
| .prepare = inno_hdmi_phy_rk3328_clk_prepare, |
| .unprepare = inno_hdmi_phy_rk3328_clk_unprepare, |
| .is_prepared = inno_hdmi_phy_rk3328_clk_is_prepared, |
| .recalc_rate = inno_hdmi_phy_rk3328_clk_recalc_rate, |
| .round_rate = inno_hdmi_phy_rk3328_clk_round_rate, |
| .set_rate = inno_hdmi_phy_rk3328_clk_set_rate, |
| }; |
| |
| static int inno_hdmi_phy_clk_register(struct inno_hdmi_phy *inno) |
| { |
| struct device *dev = inno->dev; |
| struct device_node *np = dev->of_node; |
| struct clk_init_data init; |
| const char *parent_name; |
| int ret; |
| |
| parent_name = __clk_get_name(inno->refoclk); |
| |
| init.parent_names = &parent_name; |
| init.num_parents = 1; |
| init.flags = 0; |
| init.name = "pin_hd20_pclk"; |
| init.ops = inno->plat_data->clk_ops; |
| |
| /* optional override of the clock name */ |
| of_property_read_string(np, "clock-output-names", &init.name); |
| |
| inno->hw.init = &init; |
| |
| inno->phyclk = devm_clk_register(dev, &inno->hw); |
| if (IS_ERR(inno->phyclk)) { |
| ret = PTR_ERR(inno->phyclk); |
| dev_err(dev, "failed to register clock: %d\n", ret); |
| return ret; |
| } |
| |
| ret = of_clk_add_provider(np, of_clk_src_simple_get, inno->phyclk); |
| if (ret) { |
| dev_err(dev, "failed to register clock provider: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int inno_hdmi_phy_rk3228_init(struct inno_hdmi_phy *inno) |
| { |
| /* |
| * Use phy internal register control |
| * rxsense/poweron/pllpd/pdataen signal. |
| */ |
| inno_write(inno, 0x01, RK3228_BYPASS_RXSENSE_EN | |
| RK3228_BYPASS_PWRON_EN | |
| RK3228_BYPASS_PLLPD_EN); |
| inno_update_bits(inno, 0x02, RK3228_BYPASS_PDATA_EN, |
| RK3228_BYPASS_PDATA_EN); |
| |
| /* manual power down post-PLL */ |
| inno_update_bits(inno, 0xaa, RK3228_POST_PLL_CTRL_MANUAL, |
| RK3228_POST_PLL_CTRL_MANUAL); |
| |
| inno->chip_version = 1; |
| |
| return 0; |
| } |
| |
| static int |
| inno_hdmi_phy_rk3228_power_on(struct inno_hdmi_phy *inno, |
| const struct post_pll_config *cfg, |
| const struct phy_config *phy_cfg) |
| { |
| int ret; |
| u32 v; |
| |
| inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE, |
| RK3228_PDATAEN_DISABLE); |
| inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN | |
| RK3228_POST_PLL_POWER_DOWN, |
| RK3228_PRE_PLL_POWER_DOWN | |
| RK3228_POST_PLL_POWER_DOWN); |
| |
| /* Post-PLL update */ |
| inno_update_bits(inno, 0xe9, RK3228_POST_PLL_PRE_DIV_MASK, |
| RK3228_POST_PLL_PRE_DIV(cfg->prediv)); |
| inno_update_bits(inno, 0xeb, RK3228_POST_PLL_FB_DIV_8_MASK, |
| RK3228_POST_PLL_FB_DIV_8(cfg->fbdiv)); |
| inno_write(inno, 0xea, RK3228_POST_PLL_FB_DIV_7_0(cfg->fbdiv)); |
| |
| if (cfg->postdiv == 1) { |
| inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE, |
| 0); |
| } else { |
| int div = cfg->postdiv / 2 - 1; |
| |
| inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE, |
| RK3228_POST_PLL_POST_DIV_ENABLE); |
| inno_update_bits(inno, 0xeb, RK3228_POST_PLL_POST_DIV_MASK, |
| RK3228_POST_PLL_POST_DIV(div)); |
| } |
| |
| for (v = 0; v < 4; v++) |
| inno_write(inno, 0xef + v, phy_cfg->regs[v]); |
| |
| inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN | |
| RK3228_POST_PLL_POWER_DOWN, 0); |
| inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE, |
| RK3228_BANDGAP_ENABLE); |
| inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE, |
| RK3228_TMDS_DRIVER_ENABLE); |
| |
| /* Wait for post PLL lock */ |
| ret = inno_poll(inno, 0xeb, v, v & RK3228_POST_PLL_LOCK_STATUS, |
| 100, 100000); |
| if (ret) { |
| dev_err(inno->dev, "Post-PLL locking failed\n"); |
| return ret; |
| } |
| |
| if (cfg->tmdsclock > 340000000) |
| msleep(100); |
| |
| inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE, 0); |
| return 0; |
| } |
| |
| static void inno_hdmi_phy_rk3228_power_off(struct inno_hdmi_phy *inno) |
| { |
| inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE, 0); |
| inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE, 0); |
| inno_update_bits(inno, 0xe0, RK3228_POST_PLL_POWER_DOWN, |
| RK3228_POST_PLL_POWER_DOWN); |
| } |
| |
| static const struct inno_hdmi_phy_ops rk3228_hdmi_phy_ops = { |
| .init = inno_hdmi_phy_rk3228_init, |
| .power_on = inno_hdmi_phy_rk3228_power_on, |
| .power_off = inno_hdmi_phy_rk3228_power_off, |
| }; |
| |
| static int inno_hdmi_phy_rk3328_init(struct inno_hdmi_phy *inno) |
| { |
| struct nvmem_cell *cell; |
| unsigned char *efuse_buf; |
| size_t len; |
| |
| /* |
| * Use phy internal register control |
| * rxsense/poweron/pllpd/pdataen signal. |
| */ |
| inno_write(inno, 0x01, RK3328_BYPASS_RXSENSE_EN | |
| RK3328_BYPASS_POWERON_EN | |
| RK3328_BYPASS_PLLPD_EN); |
| inno_write(inno, 0x02, RK3328_INT_POL_HIGH | RK3328_BYPASS_PDATA_EN | |
| RK3328_PDATA_EN); |
| |
| /* Disable phy irq */ |
| inno_write(inno, 0x05, 0); |
| inno_write(inno, 0x07, 0); |
| |
| /* try to read the chip-version */ |
| inno->chip_version = 1; |
| cell = nvmem_cell_get(inno->dev, "cpu-version"); |
| if (IS_ERR(cell)) { |
| if (PTR_ERR(cell) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| |
| return 0; |
| } |
| |
| efuse_buf = nvmem_cell_read(cell, &len); |
| nvmem_cell_put(cell); |
| |
| if (IS_ERR(efuse_buf)) |
| return 0; |
| if (len == 1) |
| inno->chip_version = efuse_buf[0] + 1; |
| kfree(efuse_buf); |
| |
| return 0; |
| } |
| |
| static int |
| inno_hdmi_phy_rk3328_power_on(struct inno_hdmi_phy *inno, |
| const struct post_pll_config *cfg, |
| const struct phy_config *phy_cfg) |
| { |
| int ret; |
| u32 v; |
| |
| inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0); |
| inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, |
| RK3328_POST_PLL_POWER_DOWN); |
| |
| inno_write(inno, 0xac, RK3328_POST_PLL_FB_DIV_7_0(cfg->fbdiv)); |
| if (cfg->postdiv == 1) { |
| inno_write(inno, 0xaa, RK3328_POST_PLL_REFCLK_SEL_TMDS); |
| inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) | |
| RK3328_POST_PLL_PRE_DIV(cfg->prediv)); |
| } else { |
| v = (cfg->postdiv / 2) - 1; |
| v &= RK3328_POST_PLL_POST_DIV_MASK; |
| inno_write(inno, 0xad, v); |
| inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) | |
| RK3328_POST_PLL_PRE_DIV(cfg->prediv)); |
| inno_write(inno, 0xaa, RK3328_POST_PLL_POST_DIV_ENABLE | |
| RK3328_POST_PLL_REFCLK_SEL_TMDS); |
| } |
| |
| for (v = 0; v < 14; v++) |
| inno_write(inno, 0xb5 + v, phy_cfg->regs[v]); |
| |
| /* set ESD detection threshold for TMDS CLK, D2, D1 and D0 */ |
| for (v = 0; v < 4; v++) |
| inno_update_bits(inno, 0xc8 + v, RK3328_ESD_DETECT_MASK, |
| RK3328_ESD_DETECT_340MV); |
| |
| if (phy_cfg->tmdsclock > 340000000) { |
| /* Set termination resistor to 100ohm */ |
| v = clk_get_rate(inno->sysclk) / 100000; |
| inno_write(inno, 0xc5, RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(v) |
| | RK3328_BYPASS_TERM_RESISTOR_CALIB); |
| inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v)); |
| inno_write(inno, 0xc7, RK3328_TERM_RESISTOR_100); |
| inno_update_bits(inno, 0xc5, |
| RK3328_BYPASS_TERM_RESISTOR_CALIB, 0); |
| } else { |
| inno_write(inno, 0xc5, RK3328_BYPASS_TERM_RESISTOR_CALIB); |
| |
| /* clk termination resistor is 50ohm (parallel resistors) */ |
| if (phy_cfg->tmdsclock > 165000000) |
| inno_update_bits(inno, 0xc8, |
| RK3328_TMDS_TERM_RESIST_MASK, |
| RK3328_TMDS_TERM_RESIST_75 | |
| RK3328_TMDS_TERM_RESIST_150); |
| |
| /* data termination resistor for D2, D1 and D0 is 150ohm */ |
| for (v = 0; v < 3; v++) |
| inno_update_bits(inno, 0xc9 + v, |
| RK3328_TMDS_TERM_RESIST_MASK, |
| RK3328_TMDS_TERM_RESIST_150); |
| } |
| |
| inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, 0); |
| inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE, |
| RK3328_BANDGAP_ENABLE); |
| inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE, |
| RK3328_TMDS_DRIVER_ENABLE); |
| |
| /* Wait for post PLL lock */ |
| ret = inno_poll(inno, 0xaf, v, v & RK3328_POST_PLL_LOCK_STATUS, |
| 1000, 10000); |
| if (ret) { |
| dev_err(inno->dev, "Post-PLL locking failed\n"); |
| return ret; |
| } |
| |
| if (phy_cfg->tmdsclock > 340000000) |
| msleep(100); |
| |
| inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN); |
| |
| /* Enable PHY IRQ */ |
| inno_write(inno, 0x05, RK3328_INT_TMDS_CLK(RK3328_INT_VSS_AGND_ESD_DET) |
| | RK3328_INT_TMDS_D2(RK3328_INT_VSS_AGND_ESD_DET)); |
| inno_write(inno, 0x07, RK3328_INT_TMDS_D1(RK3328_INT_VSS_AGND_ESD_DET) |
| | RK3328_INT_TMDS_D0(RK3328_INT_VSS_AGND_ESD_DET)); |
| return 0; |
| } |
| |
| static void inno_hdmi_phy_rk3328_power_off(struct inno_hdmi_phy *inno) |
| { |
| inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE, 0); |
| inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE, 0); |
| inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, |
| RK3328_POST_PLL_POWER_DOWN); |
| |
| /* Disable PHY IRQ */ |
| inno_write(inno, 0x05, 0); |
| inno_write(inno, 0x07, 0); |
| } |
| |
| static const struct inno_hdmi_phy_ops rk3328_hdmi_phy_ops = { |
| .init = inno_hdmi_phy_rk3328_init, |
| .power_on = inno_hdmi_phy_rk3328_power_on, |
| .power_off = inno_hdmi_phy_rk3328_power_off, |
| }; |
| |
| static const struct inno_hdmi_phy_drv_data rk3228_hdmi_phy_drv_data = { |
| .ops = &rk3228_hdmi_phy_ops, |
| .clk_ops = &inno_hdmi_phy_rk3228_clk_ops, |
| .phy_cfg_table = rk3228_phy_cfg, |
| }; |
| |
| static const struct inno_hdmi_phy_drv_data rk3328_hdmi_phy_drv_data = { |
| .ops = &rk3328_hdmi_phy_ops, |
| .clk_ops = &inno_hdmi_phy_rk3328_clk_ops, |
| .phy_cfg_table = rk3328_phy_cfg, |
| }; |
| |
| static const struct regmap_config inno_hdmi_phy_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 0x400, |
| }; |
| |
| static void inno_hdmi_phy_action(void *data) |
| { |
| struct inno_hdmi_phy *inno = data; |
| |
| clk_disable_unprepare(inno->refpclk); |
| clk_disable_unprepare(inno->sysclk); |
| } |
| |
| static int inno_hdmi_phy_probe(struct platform_device *pdev) |
| { |
| struct inno_hdmi_phy *inno; |
| struct phy_provider *phy_provider; |
| void __iomem *regs; |
| int ret; |
| |
| inno = devm_kzalloc(&pdev->dev, sizeof(*inno), GFP_KERNEL); |
| if (!inno) |
| return -ENOMEM; |
| |
| inno->dev = &pdev->dev; |
| |
| inno->plat_data = of_device_get_match_data(inno->dev); |
| if (!inno->plat_data || !inno->plat_data->ops) |
| return -EINVAL; |
| |
| regs = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| inno->sysclk = devm_clk_get(inno->dev, "sysclk"); |
| if (IS_ERR(inno->sysclk)) { |
| ret = PTR_ERR(inno->sysclk); |
| dev_err(inno->dev, "failed to get sysclk: %d\n", ret); |
| return ret; |
| } |
| |
| inno->refpclk = devm_clk_get(inno->dev, "refpclk"); |
| if (IS_ERR(inno->refpclk)) { |
| ret = PTR_ERR(inno->refpclk); |
| dev_err(inno->dev, "failed to get ref clock: %d\n", ret); |
| return ret; |
| } |
| |
| inno->refoclk = devm_clk_get(inno->dev, "refoclk"); |
| if (IS_ERR(inno->refoclk)) { |
| ret = PTR_ERR(inno->refoclk); |
| dev_err(inno->dev, "failed to get oscillator-ref clock: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(inno->sysclk); |
| if (ret) { |
| dev_err(inno->dev, "Cannot enable inno phy sysclk: %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Refpclk needs to be on, on at least the rk3328 for still |
| * unknown reasons. |
| */ |
| ret = clk_prepare_enable(inno->refpclk); |
| if (ret) { |
| dev_err(inno->dev, "failed to enable refpclk\n"); |
| clk_disable_unprepare(inno->sysclk); |
| return ret; |
| } |
| |
| ret = devm_add_action_or_reset(inno->dev, inno_hdmi_phy_action, |
| inno); |
| if (ret) |
| return ret; |
| |
| inno->regmap = devm_regmap_init_mmio(inno->dev, regs, |
| &inno_hdmi_phy_regmap_config); |
| if (IS_ERR(inno->regmap)) |
| return PTR_ERR(inno->regmap); |
| |
| /* only the newer rk3328 hdmiphy has an interrupt */ |
| inno->irq = platform_get_irq(pdev, 0); |
| if (inno->irq > 0) { |
| ret = devm_request_threaded_irq(inno->dev, inno->irq, |
| inno_hdmi_phy_rk3328_hardirq, |
| inno_hdmi_phy_rk3328_irq, |
| IRQF_SHARED, |
| dev_name(inno->dev), inno); |
| if (ret) |
| return ret; |
| } |
| |
| inno->phy = devm_phy_create(inno->dev, NULL, &inno_hdmi_phy_ops); |
| if (IS_ERR(inno->phy)) { |
| dev_err(inno->dev, "failed to create HDMI PHY\n"); |
| return PTR_ERR(inno->phy); |
| } |
| |
| phy_set_drvdata(inno->phy, inno); |
| phy_set_bus_width(inno->phy, 8); |
| |
| if (inno->plat_data->ops->init) { |
| ret = inno->plat_data->ops->init(inno); |
| if (ret) |
| return ret; |
| } |
| |
| ret = inno_hdmi_phy_clk_register(inno); |
| if (ret) |
| return ret; |
| |
| phy_provider = devm_of_phy_provider_register(inno->dev, |
| of_phy_simple_xlate); |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static int inno_hdmi_phy_remove(struct platform_device *pdev) |
| { |
| of_clk_del_provider(pdev->dev.of_node); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id inno_hdmi_phy_of_match[] = { |
| { |
| .compatible = "rockchip,rk3228-hdmi-phy", |
| .data = &rk3228_hdmi_phy_drv_data |
| }, { |
| .compatible = "rockchip,rk3328-hdmi-phy", |
| .data = &rk3328_hdmi_phy_drv_data |
| }, { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, inno_hdmi_phy_of_match); |
| |
| static struct platform_driver inno_hdmi_phy_driver = { |
| .probe = inno_hdmi_phy_probe, |
| .remove = inno_hdmi_phy_remove, |
| .driver = { |
| .name = "inno-hdmi-phy", |
| .of_match_table = inno_hdmi_phy_of_match, |
| }, |
| }; |
| module_platform_driver(inno_hdmi_phy_driver); |
| |
| MODULE_AUTHOR("Zheng Yang <zhengyang@rock-chips.com>"); |
| MODULE_DESCRIPTION("Innosilion HDMI 2.0 Transmitter PHY Driver"); |
| MODULE_LICENSE("GPL v2"); |