| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2008 Nokia Corporation |
| * |
| * Based on lirc_serial.c |
| */ |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/wait.h> |
| #include <linux/pwm.h> |
| #include <linux/of.h> |
| #include <linux/hrtimer.h> |
| |
| #include <media/rc-core.h> |
| |
| #define WBUF_LEN 256 |
| |
| struct ir_rx51 { |
| struct rc_dev *rcdev; |
| struct pwm_device *pwm; |
| struct hrtimer timer; |
| struct device *dev; |
| wait_queue_head_t wqueue; |
| |
| unsigned int freq; /* carrier frequency */ |
| unsigned int duty_cycle; /* carrier duty cycle */ |
| int wbuf[WBUF_LEN]; |
| int wbuf_index; |
| unsigned long device_is_open; |
| }; |
| |
| static inline void ir_rx51_on(struct ir_rx51 *ir_rx51) |
| { |
| pwm_enable(ir_rx51->pwm); |
| } |
| |
| static inline void ir_rx51_off(struct ir_rx51 *ir_rx51) |
| { |
| pwm_disable(ir_rx51->pwm); |
| } |
| |
| static int init_timing_params(struct ir_rx51 *ir_rx51) |
| { |
| struct pwm_device *pwm = ir_rx51->pwm; |
| int duty, period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, ir_rx51->freq); |
| |
| duty = DIV_ROUND_CLOSEST(ir_rx51->duty_cycle * period, 100); |
| |
| pwm_config(pwm, duty, period); |
| |
| return 0; |
| } |
| |
| static enum hrtimer_restart ir_rx51_timer_cb(struct hrtimer *timer) |
| { |
| struct ir_rx51 *ir_rx51 = container_of(timer, struct ir_rx51, timer); |
| ktime_t now; |
| |
| if (ir_rx51->wbuf_index < 0) { |
| dev_err_ratelimited(ir_rx51->dev, |
| "BUG wbuf_index has value of %i\n", |
| ir_rx51->wbuf_index); |
| goto end; |
| } |
| |
| /* |
| * If we happen to hit an odd latency spike, loop through the |
| * pulses until we catch up. |
| */ |
| do { |
| u64 ns; |
| |
| if (ir_rx51->wbuf_index >= WBUF_LEN) |
| goto end; |
| if (ir_rx51->wbuf[ir_rx51->wbuf_index] == -1) |
| goto end; |
| |
| if (ir_rx51->wbuf_index % 2) |
| ir_rx51_off(ir_rx51); |
| else |
| ir_rx51_on(ir_rx51); |
| |
| ns = US_TO_NS(ir_rx51->wbuf[ir_rx51->wbuf_index]); |
| hrtimer_add_expires_ns(timer, ns); |
| |
| ir_rx51->wbuf_index++; |
| |
| now = timer->base->get_time(); |
| |
| } while (hrtimer_get_expires_tv64(timer) < now); |
| |
| return HRTIMER_RESTART; |
| end: |
| /* Stop TX here */ |
| ir_rx51_off(ir_rx51); |
| ir_rx51->wbuf_index = -1; |
| |
| wake_up_interruptible(&ir_rx51->wqueue); |
| |
| return HRTIMER_NORESTART; |
| } |
| |
| static int ir_rx51_tx(struct rc_dev *dev, unsigned int *buffer, |
| unsigned int count) |
| { |
| struct ir_rx51 *ir_rx51 = dev->priv; |
| |
| if (count > WBUF_LEN) |
| return -EINVAL; |
| |
| memcpy(ir_rx51->wbuf, buffer, count * sizeof(unsigned int)); |
| |
| /* Wait any pending transfers to finish */ |
| wait_event_interruptible(ir_rx51->wqueue, ir_rx51->wbuf_index < 0); |
| |
| init_timing_params(ir_rx51); |
| if (count < WBUF_LEN) |
| ir_rx51->wbuf[count] = -1; /* Insert termination mark */ |
| |
| /* |
| * REVISIT: Adjust latency requirements so the device doesn't go in too |
| * deep sleep states with pm_qos_add_request(). |
| */ |
| |
| ir_rx51_on(ir_rx51); |
| ir_rx51->wbuf_index = 1; |
| hrtimer_start(&ir_rx51->timer, |
| ns_to_ktime(US_TO_NS(ir_rx51->wbuf[0])), |
| HRTIMER_MODE_REL); |
| /* |
| * Don't return back to the userspace until the transfer has |
| * finished |
| */ |
| wait_event_interruptible(ir_rx51->wqueue, ir_rx51->wbuf_index < 0); |
| |
| /* REVISIT: Remove pm_qos constraint, we can sleep again */ |
| |
| return count; |
| } |
| |
| static int ir_rx51_open(struct rc_dev *dev) |
| { |
| struct ir_rx51 *ir_rx51 = dev->priv; |
| |
| if (test_and_set_bit(1, &ir_rx51->device_is_open)) |
| return -EBUSY; |
| |
| ir_rx51->pwm = pwm_get(ir_rx51->dev, NULL); |
| if (IS_ERR(ir_rx51->pwm)) { |
| int res = PTR_ERR(ir_rx51->pwm); |
| |
| dev_err(ir_rx51->dev, "pwm_get failed: %d\n", res); |
| return res; |
| } |
| |
| return 0; |
| } |
| |
| static void ir_rx51_release(struct rc_dev *dev) |
| { |
| struct ir_rx51 *ir_rx51 = dev->priv; |
| |
| hrtimer_cancel(&ir_rx51->timer); |
| ir_rx51_off(ir_rx51); |
| pwm_put(ir_rx51->pwm); |
| |
| clear_bit(1, &ir_rx51->device_is_open); |
| } |
| |
| static struct ir_rx51 ir_rx51 = { |
| .duty_cycle = 50, |
| .wbuf_index = -1, |
| }; |
| |
| static int ir_rx51_set_duty_cycle(struct rc_dev *dev, u32 duty) |
| { |
| struct ir_rx51 *ir_rx51 = dev->priv; |
| |
| ir_rx51->duty_cycle = duty; |
| |
| return 0; |
| } |
| |
| static int ir_rx51_set_tx_carrier(struct rc_dev *dev, u32 carrier) |
| { |
| struct ir_rx51 *ir_rx51 = dev->priv; |
| |
| if (carrier > 500000 || carrier < 20000) |
| return -EINVAL; |
| |
| ir_rx51->freq = carrier; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int ir_rx51_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| /* |
| * In case the device is still open, do not suspend. Normally |
| * this should not be a problem as lircd only keeps the device |
| * open only for short periods of time. We also don't want to |
| * get involved with race conditions that might happen if we |
| * were in a middle of a transmit. Thus, we defer any suspend |
| * actions until transmit has completed. |
| */ |
| if (test_and_set_bit(1, &ir_rx51.device_is_open)) |
| return -EAGAIN; |
| |
| clear_bit(1, &ir_rx51.device_is_open); |
| |
| return 0; |
| } |
| |
| static int ir_rx51_resume(struct platform_device *dev) |
| { |
| return 0; |
| } |
| |
| #else |
| |
| #define ir_rx51_suspend NULL |
| #define ir_rx51_resume NULL |
| |
| #endif /* CONFIG_PM */ |
| |
| static int ir_rx51_probe(struct platform_device *dev) |
| { |
| struct pwm_device *pwm; |
| struct rc_dev *rcdev; |
| |
| pwm = pwm_get(&dev->dev, NULL); |
| if (IS_ERR(pwm)) { |
| int err = PTR_ERR(pwm); |
| |
| if (err != -EPROBE_DEFER) |
| dev_err(&dev->dev, "pwm_get failed: %d\n", err); |
| return err; |
| } |
| |
| /* Use default, in case userspace does not set the carrier */ |
| ir_rx51.freq = DIV_ROUND_CLOSEST(pwm_get_period(pwm), NSEC_PER_SEC); |
| pwm_put(pwm); |
| |
| hrtimer_init(&ir_rx51.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| ir_rx51.timer.function = ir_rx51_timer_cb; |
| |
| ir_rx51.dev = &dev->dev; |
| |
| rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW_TX); |
| if (!rcdev) |
| return -ENOMEM; |
| |
| rcdev->priv = &ir_rx51; |
| rcdev->open = ir_rx51_open; |
| rcdev->close = ir_rx51_release; |
| rcdev->tx_ir = ir_rx51_tx; |
| rcdev->s_tx_duty_cycle = ir_rx51_set_duty_cycle; |
| rcdev->s_tx_carrier = ir_rx51_set_tx_carrier; |
| rcdev->driver_name = KBUILD_MODNAME; |
| |
| ir_rx51.rcdev = rcdev; |
| |
| return devm_rc_register_device(&dev->dev, ir_rx51.rcdev); |
| } |
| |
| static int ir_rx51_remove(struct platform_device *dev) |
| { |
| return 0; |
| } |
| |
| static const struct of_device_id ir_rx51_match[] = { |
| { |
| .compatible = "nokia,n900-ir", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ir_rx51_match); |
| |
| static struct platform_driver ir_rx51_platform_driver = { |
| .probe = ir_rx51_probe, |
| .remove = ir_rx51_remove, |
| .suspend = ir_rx51_suspend, |
| .resume = ir_rx51_resume, |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = of_match_ptr(ir_rx51_match), |
| }, |
| }; |
| module_platform_driver(ir_rx51_platform_driver); |
| |
| MODULE_DESCRIPTION("IR TX driver for Nokia RX51"); |
| MODULE_AUTHOR("Nokia Corporation"); |
| MODULE_LICENSE("GPL"); |