arch/arm/mach-qcom/platsmp.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  *  Copyright (C) 2002 ARM Ltd.
  *  All Rights Reserved
  *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
  *  Copyright (c) 2014 The Linux Foundation. All rights reserved.
  */

 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <linux/qcom_scm.h>

 #include <asm/smp_plat.h>


 #define VDD_SC1_ARRAY_CLAMP_GFS_CTL	0x35a0
 #define SCSS_CPU1CORE_RESET		0x2d80
 #define SCSS_DBG_STATUS_CORE_PWRDUP	0x2e64

 #define APCS_CPU_PWR_CTL	0x04
 #define PLL_CLAMP		BIT(8)
 #define CORE_PWRD_UP		BIT(7)
 #define COREPOR_RST		BIT(5)
 #define CORE_RST		BIT(4)
 #define L2DT_SLP		BIT(3)
 #define CORE_MEM_CLAMP		BIT(1)
 #define CLAMP			BIT(0)

 #define APC_PWR_GATE_CTL	0x14
 #define BHS_CNT_SHIFT		24
 #define LDO_PWR_DWN_SHIFT	16
 #define LDO_BYP_SHIFT		8
 #define BHS_SEG_SHIFT		1
 #define BHS_EN			BIT(0)

 #define APCS_SAW2_VCTL		0x14
 #define APCS_SAW2_2_VCTL	0x1c

 extern void secondary_startup_arm(void);

 #ifdef CONFIG_HOTPLUG_CPU
 static void qcom_cpu_die(unsigned int cpu)
 {
 	wfi();
 }
 #endif

 static int scss_release_secondary(unsigned int cpu)
 {
 	struct device_node *node;
 	void __iomem *base;

 	node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660");
 	if (!node) {
 		pr_err("%s: can't find node\n", __func__);
 		return -ENXIO;
 	}

 	base = of_iomap(node, 0);
 	of_node_put(node);
 	if (!base)
 		return -ENOMEM;

 	writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
 	writel_relaxed(0, base + SCSS_CPU1CORE_RESET);
 	writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP);
 	mb();
 	iounmap(base);

 	return 0;
 }

 static int cortex_a7_release_secondary(unsigned int cpu)
 {
 	int ret = 0;
 	void __iomem *reg;
 	struct device_node *cpu_node, *acc_node;
 	u32 reg_val;

 	cpu_node = of_get_cpu_node(cpu, NULL);
 	if (!cpu_node)
 		return -ENODEV;

 	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
 	if (!acc_node) {
 		ret = -ENODEV;
 		goto out_acc;
 	}

 	reg = of_iomap(acc_node, 0);
 	if (!reg) {
 		ret = -ENOMEM;
 		goto out_acc_map;
 	}

 	/* Put the CPU into reset. */
 	reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP;
 	writel(reg_val, reg + APCS_CPU_PWR_CTL);

 	/* Turn on the BHS and set the BHS_CNT to 16 XO clock cycles */
 	writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
 	/* Wait for the BHS to settle */
 	udelay(2);

 	reg_val &= ~CORE_MEM_CLAMP;
 	writel(reg_val, reg + APCS_CPU_PWR_CTL);
 	reg_val |= L2DT_SLP;
 	writel(reg_val, reg + APCS_CPU_PWR_CTL);
 	udelay(2);

 	reg_val = (reg_val | BIT(17)) & ~CLAMP;
 	writel(reg_val, reg + APCS_CPU_PWR_CTL);
 	udelay(2);

 	/* Release CPU out of reset and bring it to life. */
 	reg_val &= ~(CORE_RST | COREPOR_RST);
 	writel(reg_val, reg + APCS_CPU_PWR_CTL);
 	reg_val |= CORE_PWRD_UP;
 	writel(reg_val, reg + APCS_CPU_PWR_CTL);

 	iounmap(reg);
 out_acc_map:
 	of_node_put(acc_node);
 out_acc:
 	of_node_put(cpu_node);
 	return ret;
 }

 static int kpssv1_release_secondary(unsigned int cpu)
 {
 	int ret = 0;
 	void __iomem *reg, *saw_reg;
 	struct device_node *cpu_node, *acc_node, *saw_node;
 	u32 val;

 	cpu_node = of_get_cpu_node(cpu, NULL);
 	if (!cpu_node)
 		return -ENODEV;

 	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
 	if (!acc_node) {
 		ret = -ENODEV;
 		goto out_acc;
 	}

 	saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
 	if (!saw_node) {
 		ret = -ENODEV;
 		goto out_saw;
 	}

 	reg = of_iomap(acc_node, 0);
 	if (!reg) {
 		ret = -ENOMEM;
 		goto out_acc_map;
 	}

 	saw_reg = of_iomap(saw_node, 0);
 	if (!saw_reg) {
 		ret = -ENOMEM;
 		goto out_saw_map;
 	}

 	/* Turn on CPU rail */
 	writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL);
 	mb();
 	udelay(512);

 	/* Krait bring-up sequence */
 	val = PLL_CLAMP | L2DT_SLP | CLAMP;
 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
 	val &= ~L2DT_SLP;
 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
 	mb();
 	ndelay(300);

 	val |= COREPOR_RST;
 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
 	mb();
 	udelay(2);

 	val &= ~CLAMP;
 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
 	mb();
 	udelay(2);

 	val &= ~COREPOR_RST;
 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
 	mb();
 	udelay(100);

 	val |= CORE_PWRD_UP;
 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
 	mb();

 	iounmap(saw_reg);
 out_saw_map:
 	iounmap(reg);
 out_acc_map:
 	of_node_put(saw_node);
 out_saw:
 	of_node_put(acc_node);
 out_acc:
 	of_node_put(cpu_node);
 	return ret;
 }

 static int kpssv2_release_secondary(unsigned int cpu)
 {
 	void __iomem *reg;
 	struct device_node *cpu_node, *l2_node, *acc_node, *saw_node;
 	void __iomem *l2_saw_base;
 	unsigned reg_val;
 	int ret;

 	cpu_node = of_get_cpu_node(cpu, NULL);
 	if (!cpu_node)
 		return -ENODEV;

 	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
 	if (!acc_node) {
 		ret = -ENODEV;
 		goto out_acc;
 	}

 	l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
 	if (!l2_node) {
 		ret = -ENODEV;
 		goto out_l2;
 	}

 	saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
 	if (!saw_node) {
 		ret = -ENODEV;
 		goto out_saw;
 	}

 	reg = of_iomap(acc_node, 0);
 	if (!reg) {
 		ret = -ENOMEM;
 		goto out_map;
 	}

 	l2_saw_base = of_iomap(saw_node, 0);
 	if (!l2_saw_base) {
 		ret = -ENOMEM;
 		goto out_saw_map;
 	}

 	/* Turn on the BHS, turn off LDO Bypass and power down LDO */
 	reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN;
 	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
 	mb();
 	/* wait for the BHS to settle */
 	udelay(1);

 	/* Turn on BHS segments */
 	reg_val |= 0x3f << BHS_SEG_SHIFT;
 	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
 	mb();
 	 /* wait for the BHS to settle */
 	udelay(1);

 	/* Finally turn on the bypass so that BHS supplies power */
 	reg_val |= 0x3f << LDO_BYP_SHIFT;
 	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);

 	/* enable max phases */
 	writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
 	mb();
 	udelay(50);

 	reg_val = COREPOR_RST | CLAMP;
 	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
 	mb();
 	udelay(2);

 	reg_val &= ~CLAMP;
 	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
 	mb();
 	udelay(2);

 	reg_val &= ~COREPOR_RST;
 	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
 	mb();

 	reg_val |= CORE_PWRD_UP;
 	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
 	mb();

 	ret = 0;

 	iounmap(l2_saw_base);
 out_saw_map:
 	iounmap(reg);
 out_map:
 	of_node_put(saw_node);
 out_saw:
 	of_node_put(l2_node);
 out_l2:
 	of_node_put(acc_node);
 out_acc:
 	of_node_put(cpu_node);

 	return ret;
 }

 static DEFINE_PER_CPU(int, cold_boot_done);

 static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
 {
 	int ret = 0;

 	if (!per_cpu(cold_boot_done, cpu)) {
 		ret = func(cpu);
 		if (!ret)
 			per_cpu(cold_boot_done, cpu) = true;
 	}

 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu));

 	return ret;
 }

 static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	return qcom_boot_secondary(cpu, scss_release_secondary);
 }

 static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
 }

 static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
 }

 static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	return qcom_boot_secondary(cpu, kpssv2_release_secondary);
 }

 static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpu;

 	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm)) {
 		for_each_present_cpu(cpu) {
 			if (cpu == smp_processor_id())
 				continue;
 			set_cpu_present(cpu, false);
 		}
 		pr_warn("Failed to set CPU boot address, disabling SMP\n");
 	}
 }

 static const struct smp_operations smp_msm8660_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_boot_secondary	= msm8660_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= qcom_cpu_die,
 #endif
 };
 CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);

 static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_boot_secondary	= cortex_a7_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= qcom_cpu_die,
 #endif
 };
 CPU_METHOD_OF_DECLARE(qcom_smp_msm8226, "qcom,msm8226-smp", &qcom_smp_cortex_a7_ops);
 CPU_METHOD_OF_DECLARE(qcom_smp_msm8909, "qcom,msm8909-smp", &qcom_smp_cortex_a7_ops);
 CPU_METHOD_OF_DECLARE(qcom_smp_msm8916, "qcom,msm8916-smp", &qcom_smp_cortex_a7_ops);

 static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_boot_secondary	= kpssv1_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= qcom_cpu_die,
 #endif
 };
 CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);

 static const struct smp_operations qcom_smp_kpssv2_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_boot_secondary	= kpssv2_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= qcom_cpu_die,
 #endif
 };
 CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Copyright (C) 2002 ARM Ltd.
	* All Rights Reserved
	* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
	* Copyright (c) 2014 The Linux Foundation. All rights reserved.
	*/

	#include <linux/init.h>
	#include <linux/errno.h>
	#include <linux/delay.h>
	#include <linux/device.h>
	#include <linux/of.h>
	#include <linux/of_address.h>
	#include <linux/smp.h>
	#include <linux/io.h>
	#include <linux/qcom_scm.h>

	#include <asm/smp_plat.h>


	#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x35a0
	#define SCSS_CPU1CORE_RESET 0x2d80
	#define SCSS_DBG_STATUS_CORE_PWRDUP 0x2e64

	#define APCS_CPU_PWR_CTL 0x04
	#define PLL_CLAMP BIT(8)
	#define CORE_PWRD_UP BIT(7)
	#define COREPOR_RST BIT(5)
	#define CORE_RST BIT(4)
	#define L2DT_SLP BIT(3)
	#define CORE_MEM_CLAMP BIT(1)
	#define CLAMP BIT(0)

	#define APC_PWR_GATE_CTL 0x14
	#define BHS_CNT_SHIFT 24
	#define LDO_PWR_DWN_SHIFT 16
	#define LDO_BYP_SHIFT 8
	#define BHS_SEG_SHIFT 1
	#define BHS_EN BIT(0)

	#define APCS_SAW2_VCTL 0x14
	#define APCS_SAW2_2_VCTL 0x1c

	extern void secondary_startup_arm(void);

	#ifdef CONFIG_HOTPLUG_CPU
	static void qcom_cpu_die(unsigned int cpu)
	{
	wfi();
	}
	#endif

	static int scss_release_secondary(unsigned int cpu)
	{
	struct device_node *node;
	void __iomem *base;

	node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660");
	if (!node) {
	pr_err("%s: can't find node\n", __func__);
	return -ENXIO;
	}

	base = of_iomap(node, 0);
	of_node_put(node);
	if (!base)
	return -ENOMEM;

	writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
	writel_relaxed(0, base + SCSS_CPU1CORE_RESET);
	writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP);
	mb();
	iounmap(base);

	return 0;
	}

	static int cortex_a7_release_secondary(unsigned int cpu)
	{
	int ret = 0;
	void __iomem *reg;
	struct device_node cpu_node, acc_node;
	u32 reg_val;

	cpu_node = of_get_cpu_node(cpu, NULL);
	if (!cpu_node)
	return -ENODEV;

	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
	if (!acc_node) {
	ret = -ENODEV;
	goto out_acc;
	}

	reg = of_iomap(acc_node, 0);
	if (!reg) {
	ret = -ENOMEM;
	goto out_acc_map;
	}

	/* Put the CPU into reset. */
	reg_val = CORE_RST \| COREPOR_RST \| CLAMP \| CORE_MEM_CLAMP;
	writel(reg_val, reg + APCS_CPU_PWR_CTL);

	/* Turn on the BHS and set the BHS_CNT to 16 XO clock cycles */
	writel(BHS_EN \| (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
	/* Wait for the BHS to settle */
	udelay(2);

	reg_val &= ~CORE_MEM_CLAMP;
	writel(reg_val, reg + APCS_CPU_PWR_CTL);
	reg_val \|= L2DT_SLP;
	writel(reg_val, reg + APCS_CPU_PWR_CTL);
	udelay(2);

	reg_val = (reg_val \| BIT(17)) & ~CLAMP;
	writel(reg_val, reg + APCS_CPU_PWR_CTL);
	udelay(2);

	/* Release CPU out of reset and bring it to life. */
	reg_val &= ~(CORE_RST \| COREPOR_RST);
	writel(reg_val, reg + APCS_CPU_PWR_CTL);
	reg_val \|= CORE_PWRD_UP;
	writel(reg_val, reg + APCS_CPU_PWR_CTL);

	iounmap(reg);
	out_acc_map:
	of_node_put(acc_node);
	out_acc:
	of_node_put(cpu_node);
	return ret;
	}

	static int kpssv1_release_secondary(unsigned int cpu)
	{
	int ret = 0;
	void __iomem reg, saw_reg;
	struct device_node cpu_node, acc_node, *saw_node;
	u32 val;

	cpu_node = of_get_cpu_node(cpu, NULL);
	if (!cpu_node)
	return -ENODEV;

	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
	if (!acc_node) {
	ret = -ENODEV;
	goto out_acc;
	}

	saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
	if (!saw_node) {
	ret = -ENODEV;
	goto out_saw;
	}

	reg = of_iomap(acc_node, 0);
	if (!reg) {
	ret = -ENOMEM;
	goto out_acc_map;
	}

	saw_reg = of_iomap(saw_node, 0);
	if (!saw_reg) {
	ret = -ENOMEM;
	goto out_saw_map;
	}

	/* Turn on CPU rail */
	writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL);
	mb();
	udelay(512);

	/* Krait bring-up sequence */
	val = PLL_CLAMP \| L2DT_SLP \| CLAMP;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	val &= ~L2DT_SLP;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();
	ndelay(300);

	val \|= COREPOR_RST;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(2);

	val &= ~CLAMP;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(2);

	val &= ~COREPOR_RST;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(100);

	val \|= CORE_PWRD_UP;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();

	iounmap(saw_reg);
	out_saw_map:
	iounmap(reg);
	out_acc_map:
	of_node_put(saw_node);
	out_saw:
	of_node_put(acc_node);
	out_acc:
	of_node_put(cpu_node);
	return ret;
	}

	static int kpssv2_release_secondary(unsigned int cpu)
	{
	void __iomem *reg;
	struct device_node cpu_node, l2_node, acc_node, saw_node;
	void __iomem *l2_saw_base;
	unsigned reg_val;
	int ret;

	cpu_node = of_get_cpu_node(cpu, NULL);
	if (!cpu_node)
	return -ENODEV;

	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
	if (!acc_node) {
	ret = -ENODEV;
	goto out_acc;
	}

	l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
	if (!l2_node) {
	ret = -ENODEV;
	goto out_l2;
	}

	saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
	if (!saw_node) {
	ret = -ENODEV;
	goto out_saw;
	}

	reg = of_iomap(acc_node, 0);
	if (!reg) {
	ret = -ENOMEM;
	goto out_map;
	}

	l2_saw_base = of_iomap(saw_node, 0);
	if (!l2_saw_base) {
	ret = -ENOMEM;
	goto out_saw_map;
	}

	/* Turn on the BHS, turn off LDO Bypass and power down LDO */
	reg_val = (64 << BHS_CNT_SHIFT) \| (0x3f << LDO_PWR_DWN_SHIFT) \| BHS_EN;
	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
	mb();
	/* wait for the BHS to settle */
	udelay(1);

	/* Turn on BHS segments */
	reg_val \|= 0x3f << BHS_SEG_SHIFT;
	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
	mb();
	/* wait for the BHS to settle */
	udelay(1);

	/* Finally turn on the bypass so that BHS supplies power */
	reg_val \|= 0x3f << LDO_BYP_SHIFT;
	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);

	/* enable max phases */
	writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
	mb();
	udelay(50);

	reg_val = COREPOR_RST \| CLAMP;
	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(2);

	reg_val &= ~CLAMP;
	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(2);

	reg_val &= ~COREPOR_RST;
	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
	mb();

	reg_val \|= CORE_PWRD_UP;
	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
	mb();

	ret = 0;

	iounmap(l2_saw_base);
	out_saw_map:
	iounmap(reg);
	out_map:
	of_node_put(saw_node);
	out_saw:
	of_node_put(l2_node);
	out_l2:
	of_node_put(acc_node);
	out_acc:
	of_node_put(cpu_node);

	return ret;
	}

	static DEFINE_PER_CPU(int, cold_boot_done);

	static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
	{
	int ret = 0;

	if (!per_cpu(cold_boot_done, cpu)) {
	ret = func(cpu);
	if (!ret)
	per_cpu(cold_boot_done, cpu) = true;
	}

	/*
	* Send the secondary CPU a soft interrupt, thereby causing
	* the boot monitor to read the system wide flags register,
	* and branch to the address found there.
	*/
	arch_send_wakeup_ipi_mask(cpumask_of(cpu));

	return ret;
	}

	static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
	{
	return qcom_boot_secondary(cpu, scss_release_secondary);
	}

	static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
	{
	return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
	}

	static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
	{
	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
	}

	static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
	{
	return qcom_boot_secondary(cpu, kpssv2_release_secondary);
	}

	static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
	{
	int cpu;

	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm)) {
	for_each_present_cpu(cpu) {
	if (cpu == smp_processor_id())
	continue;
	set_cpu_present(cpu, false);
	}
	pr_warn("Failed to set CPU boot address, disabling SMP\n");
	}
	}

	static const struct smp_operations smp_msm8660_ops __initconst = {
	.smp_prepare_cpus = qcom_smp_prepare_cpus,
	.smp_boot_secondary = msm8660_boot_secondary,
	#ifdef CONFIG_HOTPLUG_CPU
	.cpu_die = qcom_cpu_die,
	#endif
	};
	CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);

	static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
	.smp_prepare_cpus = qcom_smp_prepare_cpus,
	.smp_boot_secondary = cortex_a7_boot_secondary,
	#ifdef CONFIG_HOTPLUG_CPU
	.cpu_die = qcom_cpu_die,
	#endif
	};
	CPU_METHOD_OF_DECLARE(qcom_smp_msm8226, "qcom,msm8226-smp", &qcom_smp_cortex_a7_ops);
	CPU_METHOD_OF_DECLARE(qcom_smp_msm8909, "qcom,msm8909-smp", &qcom_smp_cortex_a7_ops);
	CPU_METHOD_OF_DECLARE(qcom_smp_msm8916, "qcom,msm8916-smp", &qcom_smp_cortex_a7_ops);

	static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
	.smp_prepare_cpus = qcom_smp_prepare_cpus,
	.smp_boot_secondary = kpssv1_boot_secondary,
	#ifdef CONFIG_HOTPLUG_CPU
	.cpu_die = qcom_cpu_die,
	#endif
	};
	CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);

	static const struct smp_operations qcom_smp_kpssv2_ops __initconst = {
	.smp_prepare_cpus = qcom_smp_prepare_cpus,
	.smp_boot_secondary = kpssv2_boot_secondary,
	#ifdef CONFIG_HOTPLUG_CPU
	.cpu_die = qcom_cpu_die,
	#endif
	};
	CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);