| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Copyright (c) 2011 Samsung Electronics Co., Ltd. |
| // http://www.samsung.com |
| // |
| // Base Samsung platform device definitions |
| |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/list.h> |
| #include <linux/timer.h> |
| #include <linux/init.h> |
| #include <linux/serial_core.h> |
| #include <linux/serial_s3c.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/fb.h> |
| #include <linux/gfp.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/onenand.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mmc/host.h> |
| #include <linux/ioport.h> |
| #include <linux/sizes.h> |
| #include <linux/platform_data/s3c-hsudc.h> |
| #include <linux/platform_data/s3c-hsotg.h> |
| #include <linux/platform_data/dma-s3c24xx.h> |
| |
| #include <linux/platform_data/media/s5p_hdmi.h> |
| |
| #include <asm/irq.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| |
| #include "irqs.h" |
| #include "map.h" |
| #include "gpio-samsung.h" |
| #include "gpio-cfg.h" |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| #include "regs-s3c2443-clock.h" |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| #include "cpu.h" |
| #include "devs.h" |
| #include <linux/soc/samsung/s3c-adc.h> |
| #include <linux/platform_data/ata-samsung_cf.h> |
| #include "fb.h" |
| #include <linux/platform_data/fb-s3c2410.h> |
| #include <linux/platform_data/hwmon-s3c.h> |
| #include <linux/platform_data/i2c-s3c2410.h> |
| #include "keypad.h" |
| #include <linux/platform_data/mmc-s3cmci.h> |
| #include <linux/platform_data/mtd-nand-s3c2410.h> |
| #include "pwm-core.h" |
| #include "sdhci.h" |
| #include <linux/platform_data/touchscreen-s3c2410.h> |
| #include <linux/platform_data/usb-s3c2410_udc.h> |
| #include <linux/platform_data/usb-ohci-s3c2410.h> |
| #include "usb-phy.h" |
| #include <linux/platform_data/asoc-s3c.h> |
| #include <linux/platform_data/spi-s3c64xx.h> |
| |
| #define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) })) |
| |
| /* AC97 */ |
| #ifdef CONFIG_CPU_S3C2440 |
| static struct resource s3c_ac97_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97), |
| [1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97), |
| }; |
| |
| struct platform_device s3c_device_ac97 = { |
| .name = "samsung-ac97", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_ac97_resource), |
| .resource = s3c_ac97_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| } |
| }; |
| #endif /* CONFIG_CPU_S3C2440 */ |
| |
| /* ADC */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static struct resource s3c_adc_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC), |
| [1] = DEFINE_RES_IRQ(IRQ_TC), |
| [2] = DEFINE_RES_IRQ(IRQ_ADC), |
| }; |
| |
| struct platform_device s3c_device_adc = { |
| .name = "s3c24xx-adc", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_adc_resource), |
| .resource = s3c_adc_resource, |
| }; |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| #if defined(CONFIG_SAMSUNG_DEV_ADC) |
| static struct resource s3c_adc_resource[] = { |
| [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256), |
| [1] = DEFINE_RES_IRQ(IRQ_ADC), |
| [2] = DEFINE_RES_IRQ(IRQ_TC), |
| }; |
| |
| struct platform_device s3c_device_adc = { |
| .name = "exynos-adc", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_adc_resource), |
| .resource = s3c_adc_resource, |
| }; |
| #endif /* CONFIG_SAMSUNG_DEV_ADC */ |
| |
| /* Camif Controller */ |
| |
| #ifdef CONFIG_CPU_S3C2440 |
| static struct resource s3c_camif_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF), |
| [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C), |
| [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P), |
| }; |
| |
| struct platform_device s3c_device_camif = { |
| .name = "s3c2440-camif", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_camif_resource), |
| .resource = s3c_camif_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| } |
| }; |
| #endif /* CONFIG_CPU_S3C2440 */ |
| |
| /* FB */ |
| |
| #ifdef CONFIG_S3C_DEV_FB |
| static struct resource s3c_fb_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_FB, SZ_16K), |
| [1] = DEFINE_RES_IRQ(IRQ_LCD_VSYNC), |
| [2] = DEFINE_RES_IRQ(IRQ_LCD_FIFO), |
| [3] = DEFINE_RES_IRQ(IRQ_LCD_SYSTEM), |
| }; |
| |
| struct platform_device s3c_device_fb = { |
| .name = "s3c-fb", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_fb_resource), |
| .resource = s3c_fb_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd) |
| { |
| s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), |
| &s3c_device_fb); |
| } |
| #endif /* CONFIG_S3C_DEV_FB */ |
| |
| /* HWMON */ |
| |
| #ifdef CONFIG_S3C_DEV_HWMON |
| struct platform_device s3c_device_hwmon = { |
| .name = "s3c-hwmon", |
| .id = -1, |
| .dev.parent = &s3c_device_adc.dev, |
| }; |
| |
| void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd) |
| { |
| s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata), |
| &s3c_device_hwmon); |
| } |
| #endif /* CONFIG_S3C_DEV_HWMON */ |
| |
| /* HSMMC */ |
| |
| #ifdef CONFIG_S3C_DEV_HSMMC |
| static struct resource s3c_hsmmc_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_HSMMC0, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_HSMMC0), |
| }; |
| |
| struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = { |
| .max_width = 4, |
| .host_caps = (MMC_CAP_4_BIT_DATA | |
| MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), |
| }; |
| |
| struct platform_device s3c_device_hsmmc0 = { |
| .name = "s3c-sdhci", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(s3c_hsmmc_resource), |
| .resource = s3c_hsmmc_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &s3c_hsmmc0_def_platdata, |
| }, |
| }; |
| |
| void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) |
| { |
| s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata); |
| } |
| #endif /* CONFIG_S3C_DEV_HSMMC */ |
| |
| #ifdef CONFIG_S3C_DEV_HSMMC1 |
| static struct resource s3c_hsmmc1_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_HSMMC1, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_HSMMC1), |
| }; |
| |
| struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = { |
| .max_width = 4, |
| .host_caps = (MMC_CAP_4_BIT_DATA | |
| MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), |
| }; |
| |
| struct platform_device s3c_device_hsmmc1 = { |
| .name = "s3c-sdhci", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource), |
| .resource = s3c_hsmmc1_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &s3c_hsmmc1_def_platdata, |
| }, |
| }; |
| |
| void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) |
| { |
| s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata); |
| } |
| #endif /* CONFIG_S3C_DEV_HSMMC1 */ |
| |
| /* HSMMC2 */ |
| |
| #ifdef CONFIG_S3C_DEV_HSMMC2 |
| static struct resource s3c_hsmmc2_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_HSMMC2, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_HSMMC2), |
| }; |
| |
| struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = { |
| .max_width = 4, |
| .host_caps = (MMC_CAP_4_BIT_DATA | |
| MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), |
| }; |
| |
| struct platform_device s3c_device_hsmmc2 = { |
| .name = "s3c-sdhci", |
| .id = 2, |
| .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource), |
| .resource = s3c_hsmmc2_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &s3c_hsmmc2_def_platdata, |
| }, |
| }; |
| |
| void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) |
| { |
| s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata); |
| } |
| #endif /* CONFIG_S3C_DEV_HSMMC2 */ |
| |
| #ifdef CONFIG_S3C_DEV_HSMMC3 |
| static struct resource s3c_hsmmc3_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_HSMMC3), |
| }; |
| |
| struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { |
| .max_width = 4, |
| .host_caps = (MMC_CAP_4_BIT_DATA | |
| MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), |
| }; |
| |
| struct platform_device s3c_device_hsmmc3 = { |
| .name = "s3c-sdhci", |
| .id = 3, |
| .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), |
| .resource = s3c_hsmmc3_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &s3c_hsmmc3_def_platdata, |
| }, |
| }; |
| |
| void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) |
| { |
| s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata); |
| } |
| #endif /* CONFIG_S3C_DEV_HSMMC3 */ |
| |
| /* I2C */ |
| |
| static struct resource s3c_i2c0_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_IIC, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_IIC), |
| }; |
| |
| struct platform_device s3c_device_i2c0 = { |
| .name = "s3c2410-i2c", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(s3c_i2c0_resource), |
| .resource = s3c_i2c0_resource, |
| }; |
| |
| struct s3c2410_platform_i2c default_i2c_data __initdata = { |
| .flags = 0, |
| .slave_addr = 0x10, |
| .frequency = 100*1000, |
| .sda_delay = 100, |
| }; |
| |
| void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) |
| { |
| struct s3c2410_platform_i2c *npd; |
| |
| if (!pd) { |
| pd = &default_i2c_data; |
| pd->bus_num = 0; |
| } |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c0); |
| |
| if (!npd->cfg_gpio) |
| npd->cfg_gpio = s3c_i2c0_cfg_gpio; |
| } |
| |
| #ifdef CONFIG_S3C_DEV_I2C1 |
| static struct resource s3c_i2c1_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_IIC1, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_IIC1), |
| }; |
| |
| struct platform_device s3c_device_i2c1 = { |
| .name = "s3c2410-i2c", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(s3c_i2c1_resource), |
| .resource = s3c_i2c1_resource, |
| }; |
| |
| void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) |
| { |
| struct s3c2410_platform_i2c *npd; |
| |
| if (!pd) { |
| pd = &default_i2c_data; |
| pd->bus_num = 1; |
| } |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c1); |
| |
| if (!npd->cfg_gpio) |
| npd->cfg_gpio = s3c_i2c1_cfg_gpio; |
| } |
| #endif /* CONFIG_S3C_DEV_I2C1 */ |
| |
| #ifdef CONFIG_S3C_DEV_I2C2 |
| static struct resource s3c_i2c2_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_IIC2), |
| }; |
| |
| struct platform_device s3c_device_i2c2 = { |
| .name = "s3c2410-i2c", |
| .id = 2, |
| .num_resources = ARRAY_SIZE(s3c_i2c2_resource), |
| .resource = s3c_i2c2_resource, |
| }; |
| |
| void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd) |
| { |
| struct s3c2410_platform_i2c *npd; |
| |
| if (!pd) { |
| pd = &default_i2c_data; |
| pd->bus_num = 2; |
| } |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c2); |
| |
| if (!npd->cfg_gpio) |
| npd->cfg_gpio = s3c_i2c2_cfg_gpio; |
| } |
| #endif /* CONFIG_S3C_DEV_I2C2 */ |
| |
| #ifdef CONFIG_S3C_DEV_I2C3 |
| static struct resource s3c_i2c3_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_IIC3), |
| }; |
| |
| struct platform_device s3c_device_i2c3 = { |
| .name = "s3c2440-i2c", |
| .id = 3, |
| .num_resources = ARRAY_SIZE(s3c_i2c3_resource), |
| .resource = s3c_i2c3_resource, |
| }; |
| |
| void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd) |
| { |
| struct s3c2410_platform_i2c *npd; |
| |
| if (!pd) { |
| pd = &default_i2c_data; |
| pd->bus_num = 3; |
| } |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c3); |
| |
| if (!npd->cfg_gpio) |
| npd->cfg_gpio = s3c_i2c3_cfg_gpio; |
| } |
| #endif /*CONFIG_S3C_DEV_I2C3 */ |
| |
| #ifdef CONFIG_S3C_DEV_I2C4 |
| static struct resource s3c_i2c4_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_IIC4), |
| }; |
| |
| struct platform_device s3c_device_i2c4 = { |
| .name = "s3c2440-i2c", |
| .id = 4, |
| .num_resources = ARRAY_SIZE(s3c_i2c4_resource), |
| .resource = s3c_i2c4_resource, |
| }; |
| |
| void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd) |
| { |
| struct s3c2410_platform_i2c *npd; |
| |
| if (!pd) { |
| pd = &default_i2c_data; |
| pd->bus_num = 4; |
| } |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c4); |
| |
| if (!npd->cfg_gpio) |
| npd->cfg_gpio = s3c_i2c4_cfg_gpio; |
| } |
| #endif /*CONFIG_S3C_DEV_I2C4 */ |
| |
| #ifdef CONFIG_S3C_DEV_I2C5 |
| static struct resource s3c_i2c5_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_IIC5), |
| }; |
| |
| struct platform_device s3c_device_i2c5 = { |
| .name = "s3c2440-i2c", |
| .id = 5, |
| .num_resources = ARRAY_SIZE(s3c_i2c5_resource), |
| .resource = s3c_i2c5_resource, |
| }; |
| |
| void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd) |
| { |
| struct s3c2410_platform_i2c *npd; |
| |
| if (!pd) { |
| pd = &default_i2c_data; |
| pd->bus_num = 5; |
| } |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c5); |
| |
| if (!npd->cfg_gpio) |
| npd->cfg_gpio = s3c_i2c5_cfg_gpio; |
| } |
| #endif /*CONFIG_S3C_DEV_I2C5 */ |
| |
| #ifdef CONFIG_S3C_DEV_I2C6 |
| static struct resource s3c_i2c6_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_IIC6), |
| }; |
| |
| struct platform_device s3c_device_i2c6 = { |
| .name = "s3c2440-i2c", |
| .id = 6, |
| .num_resources = ARRAY_SIZE(s3c_i2c6_resource), |
| .resource = s3c_i2c6_resource, |
| }; |
| |
| void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd) |
| { |
| struct s3c2410_platform_i2c *npd; |
| |
| if (!pd) { |
| pd = &default_i2c_data; |
| pd->bus_num = 6; |
| } |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c6); |
| |
| if (!npd->cfg_gpio) |
| npd->cfg_gpio = s3c_i2c6_cfg_gpio; |
| } |
| #endif /* CONFIG_S3C_DEV_I2C6 */ |
| |
| #ifdef CONFIG_S3C_DEV_I2C7 |
| static struct resource s3c_i2c7_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K), |
| [1] = DEFINE_RES_IRQ(IRQ_IIC7), |
| }; |
| |
| struct platform_device s3c_device_i2c7 = { |
| .name = "s3c2440-i2c", |
| .id = 7, |
| .num_resources = ARRAY_SIZE(s3c_i2c7_resource), |
| .resource = s3c_i2c7_resource, |
| }; |
| |
| void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd) |
| { |
| struct s3c2410_platform_i2c *npd; |
| |
| if (!pd) { |
| pd = &default_i2c_data; |
| pd->bus_num = 7; |
| } |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c7); |
| |
| if (!npd->cfg_gpio) |
| npd->cfg_gpio = s3c_i2c7_cfg_gpio; |
| } |
| #endif /* CONFIG_S3C_DEV_I2C7 */ |
| |
| /* I2S */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static struct resource s3c_iis_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS), |
| }; |
| |
| struct platform_device s3c_device_iis = { |
| .name = "s3c24xx-iis", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_iis_resource), |
| .resource = s3c_iis_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| } |
| }; |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| /* IDE CFCON */ |
| |
| #ifdef CONFIG_SAMSUNG_DEV_IDE |
| static struct resource s3c_cfcon_resource[] = { |
| [0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K), |
| [1] = DEFINE_RES_IRQ(IRQ_CFCON), |
| }; |
| |
| struct platform_device s3c_device_cfcon = { |
| .id = 0, |
| .num_resources = ARRAY_SIZE(s3c_cfcon_resource), |
| .resource = s3c_cfcon_resource, |
| }; |
| |
| void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata) |
| { |
| s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata), |
| &s3c_device_cfcon); |
| } |
| #endif /* CONFIG_SAMSUNG_DEV_IDE */ |
| |
| /* KEYPAD */ |
| |
| #ifdef CONFIG_SAMSUNG_DEV_KEYPAD |
| static struct resource samsung_keypad_resources[] = { |
| [0] = DEFINE_RES_MEM(SAMSUNG_PA_KEYPAD, SZ_32), |
| [1] = DEFINE_RES_IRQ(IRQ_KEYPAD), |
| }; |
| |
| struct platform_device samsung_device_keypad = { |
| .name = "samsung-keypad", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(samsung_keypad_resources), |
| .resource = samsung_keypad_resources, |
| }; |
| |
| void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd) |
| { |
| struct samsung_keypad_platdata *npd; |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &samsung_device_keypad); |
| |
| if (!npd->cfg_gpio) |
| npd->cfg_gpio = samsung_keypad_cfg_gpio; |
| } |
| #endif /* CONFIG_SAMSUNG_DEV_KEYPAD */ |
| |
| /* LCD Controller */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static struct resource s3c_lcd_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD), |
| [1] = DEFINE_RES_IRQ(IRQ_LCD), |
| }; |
| |
| struct platform_device s3c_device_lcd = { |
| .name = "s3c2410-lcd", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_lcd_resource), |
| .resource = s3c_lcd_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| } |
| }; |
| |
| void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) |
| { |
| struct s3c2410fb_mach_info *npd; |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd); |
| if (npd) { |
| npd->displays = kmemdup(pd->displays, |
| sizeof(struct s3c2410fb_display) * npd->num_displays, |
| GFP_KERNEL); |
| if (!npd->displays) |
| printk(KERN_ERR "no memory for LCD display data\n"); |
| } else { |
| printk(KERN_ERR "no memory for LCD platform data\n"); |
| } |
| } |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| /* NAND */ |
| |
| #ifdef CONFIG_S3C_DEV_NAND |
| static struct resource s3c_nand_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M), |
| }; |
| |
| struct platform_device s3c_device_nand = { |
| .name = "s3c2410-nand", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_nand_resource), |
| .resource = s3c_nand_resource, |
| }; |
| |
| /* |
| * s3c_nand_copy_set() - copy nand set data |
| * @set: The new structure, directly copied from the old. |
| * |
| * Copy all the fields from the NAND set field from what is probably __initdata |
| * to new kernel memory. The code returns 0 if the copy happened correctly or |
| * an error code for the calling function to display. |
| * |
| * Note, we currently do not try and look to see if we've already copied the |
| * data in a previous set. |
| */ |
| static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set) |
| { |
| void *ptr; |
| int size; |
| |
| size = sizeof(struct mtd_partition) * set->nr_partitions; |
| if (size) { |
| ptr = kmemdup(set->partitions, size, GFP_KERNEL); |
| set->partitions = ptr; |
| |
| if (!ptr) |
| return -ENOMEM; |
| } |
| |
| if (set->nr_map && set->nr_chips) { |
| size = sizeof(int) * set->nr_chips; |
| ptr = kmemdup(set->nr_map, size, GFP_KERNEL); |
| set->nr_map = ptr; |
| |
| if (!ptr) |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) |
| { |
| struct s3c2410_platform_nand *npd; |
| int size; |
| int ret; |
| |
| /* note, if we get a failure in allocation, we simply drop out of the |
| * function. If there is so little memory available at initialisation |
| * time then there is little chance the system is going to run. |
| */ |
| |
| npd = s3c_set_platdata(nand, sizeof(*npd), &s3c_device_nand); |
| if (!npd) |
| return; |
| |
| /* now see if we need to copy any of the nand set data */ |
| |
| size = sizeof(struct s3c2410_nand_set) * npd->nr_sets; |
| if (size) { |
| struct s3c2410_nand_set *from = npd->sets; |
| struct s3c2410_nand_set *to; |
| int i; |
| |
| to = kmemdup(from, size, GFP_KERNEL); |
| npd->sets = to; /* set, even if we failed */ |
| |
| if (!to) { |
| printk(KERN_ERR "%s: no memory for sets\n", __func__); |
| return; |
| } |
| |
| for (i = 0; i < npd->nr_sets; i++) { |
| ret = s3c_nand_copy_set(to); |
| if (ret) { |
| printk(KERN_ERR "%s: failed to copy set %d\n", |
| __func__, i); |
| return; |
| } |
| to++; |
| } |
| } |
| } |
| #endif /* CONFIG_S3C_DEV_NAND */ |
| |
| /* ONENAND */ |
| |
| #ifdef CONFIG_S3C_DEV_ONENAND |
| static struct resource s3c_onenand_resources[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K), |
| [1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF), |
| [2] = DEFINE_RES_IRQ(IRQ_ONENAND), |
| }; |
| |
| struct platform_device s3c_device_onenand = { |
| .name = "samsung-onenand", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(s3c_onenand_resources), |
| .resource = s3c_onenand_resources, |
| }; |
| #endif /* CONFIG_S3C_DEV_ONENAND */ |
| |
| #ifdef CONFIG_S3C64XX_DEV_ONENAND1 |
| static struct resource s3c64xx_onenand1_resources[] = { |
| [0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K), |
| [1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF), |
| [2] = DEFINE_RES_IRQ(IRQ_ONENAND1), |
| }; |
| |
| struct platform_device s3c64xx_device_onenand1 = { |
| .name = "samsung-onenand", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources), |
| .resource = s3c64xx_onenand1_resources, |
| }; |
| |
| void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata) |
| { |
| s3c_set_platdata(pdata, sizeof(struct onenand_platform_data), |
| &s3c64xx_device_onenand1); |
| } |
| #endif /* CONFIG_S3C64XX_DEV_ONENAND1 */ |
| |
| /* PWM Timer */ |
| |
| #ifdef CONFIG_SAMSUNG_DEV_PWM |
| static struct resource samsung_pwm_resource[] = { |
| DEFINE_RES_MEM(SAMSUNG_PA_TIMER, SZ_4K), |
| }; |
| |
| struct platform_device samsung_device_pwm = { |
| .name = "samsung-pwm", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(samsung_pwm_resource), |
| .resource = samsung_pwm_resource, |
| }; |
| |
| void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd) |
| { |
| samsung_device_pwm.dev.platform_data = pd; |
| } |
| #endif /* CONFIG_SAMSUNG_DEV_PWM */ |
| |
| /* RTC */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static struct resource s3c_rtc_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256), |
| [1] = DEFINE_RES_IRQ(IRQ_RTC), |
| [2] = DEFINE_RES_IRQ(IRQ_TICK), |
| }; |
| |
| struct platform_device s3c_device_rtc = { |
| .name = "s3c2410-rtc", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_rtc_resource), |
| .resource = s3c_rtc_resource, |
| }; |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| #ifdef CONFIG_S3C_DEV_RTC |
| static struct resource s3c_rtc_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256), |
| [1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM), |
| [2] = DEFINE_RES_IRQ(IRQ_RTC_TIC), |
| }; |
| |
| struct platform_device s3c_device_rtc = { |
| .name = "s3c64xx-rtc", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_rtc_resource), |
| .resource = s3c_rtc_resource, |
| }; |
| #endif /* CONFIG_S3C_DEV_RTC */ |
| |
| /* SDI */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd) |
| { |
| switch (power_mode) { |
| case MMC_POWER_ON: |
| case MMC_POWER_UP: |
| /* Configure GPE5...GPE10 pins in SD mode */ |
| s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), |
| S3C_GPIO_PULL_NONE); |
| break; |
| |
| case MMC_POWER_OFF: |
| default: |
| gpio_direction_output(S3C2410_GPE(5), 0); |
| break; |
| } |
| } |
| |
| static struct resource s3c_sdi_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI), |
| [1] = DEFINE_RES_IRQ(IRQ_SDI), |
| }; |
| |
| static struct s3c24xx_mci_pdata s3cmci_def_pdata = { |
| /* This is currently here to avoid a number of if (host->pdata) |
| * checks. Any zero fields to ensure reasonable defaults are picked. */ |
| .no_wprotect = 1, |
| .no_detect = 1, |
| .set_power = s3c24xx_mci_def_set_power, |
| }; |
| |
| struct platform_device s3c_device_sdi = { |
| .name = "s3c2410-sdi", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_sdi_resource), |
| .resource = s3c_sdi_resource, |
| .dev.platform_data = &s3cmci_def_pdata, |
| }; |
| |
| void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata) |
| { |
| s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata), |
| &s3c_device_sdi); |
| } |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| /* SPI */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static struct resource s3c_spi0_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32), |
| [1] = DEFINE_RES_IRQ(IRQ_SPI0), |
| }; |
| |
| struct platform_device s3c_device_spi0 = { |
| .name = "s3c2410-spi", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(s3c_spi0_resource), |
| .resource = s3c_spi0_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| } |
| }; |
| |
| static struct resource s3c_spi1_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32), |
| [1] = DEFINE_RES_IRQ(IRQ_SPI1), |
| }; |
| |
| struct platform_device s3c_device_spi1 = { |
| .name = "s3c2410-spi", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(s3c_spi1_resource), |
| .resource = s3c_spi1_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| } |
| }; |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| /* Touchscreen */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static struct resource s3c_ts_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC), |
| [1] = DEFINE_RES_IRQ(IRQ_TC), |
| }; |
| |
| struct platform_device s3c_device_ts = { |
| .name = "s3c2410-ts", |
| .id = -1, |
| .dev.parent = &s3c_device_adc.dev, |
| .num_resources = ARRAY_SIZE(s3c_ts_resource), |
| .resource = s3c_ts_resource, |
| }; |
| |
| void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info) |
| { |
| s3c_set_platdata(hard_s3c2410ts_info, |
| sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts); |
| } |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| #ifdef CONFIG_SAMSUNG_DEV_TS |
| static struct s3c2410_ts_mach_info default_ts_data __initdata = { |
| .delay = 10000, |
| .presc = 49, |
| .oversampling_shift = 2, |
| }; |
| |
| void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) |
| { |
| if (!pd) |
| pd = &default_ts_data; |
| |
| s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info), |
| &s3c_device_adc); |
| } |
| #endif /* CONFIG_SAMSUNG_DEV_TS */ |
| |
| /* USB */ |
| |
| #ifdef CONFIG_S3C_DEV_USB_HOST |
| static struct resource s3c_usb_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256), |
| [1] = DEFINE_RES_IRQ(IRQ_USBH), |
| }; |
| |
| struct platform_device s3c_device_ohci = { |
| .name = "s3c2410-ohci", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_usb_resource), |
| .resource = s3c_usb_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| } |
| }; |
| |
| /* |
| * s3c_ohci_set_platdata - initialise OHCI device platform data |
| * @info: The platform data. |
| * |
| * This call copies the @info passed in and sets the device .platform_data |
| * field to that copy. The @info is copied so that the original can be marked |
| * __initdata. |
| */ |
| |
| void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info) |
| { |
| s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info), |
| &s3c_device_ohci); |
| } |
| #endif /* CONFIG_S3C_DEV_USB_HOST */ |
| |
| /* USB Device (Gadget) */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static struct resource s3c_usbgadget_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV), |
| [1] = DEFINE_RES_IRQ(IRQ_USBD), |
| }; |
| |
| struct platform_device s3c_device_usbgadget = { |
| .name = "s3c2410-usbgadget", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_usbgadget_resource), |
| .resource = s3c_usbgadget_resource, |
| }; |
| |
| void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd) |
| { |
| s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget); |
| } |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| /* USB HSOTG */ |
| |
| #ifdef CONFIG_S3C_DEV_USB_HSOTG |
| static struct resource s3c_usb_hsotg_resources[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K), |
| [1] = DEFINE_RES_IRQ(IRQ_OTG), |
| }; |
| |
| struct platform_device s3c_device_usb_hsotg = { |
| .name = "s3c-hsotg", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources), |
| .resource = s3c_usb_hsotg_resources, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd) |
| { |
| struct dwc2_hsotg_plat *npd; |
| |
| npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_usb_hsotg); |
| |
| if (!npd->phy_init) |
| npd->phy_init = s3c_usb_phy_init; |
| if (!npd->phy_exit) |
| npd->phy_exit = s3c_usb_phy_exit; |
| } |
| #endif /* CONFIG_S3C_DEV_USB_HSOTG */ |
| |
| /* USB High Spped 2.0 Device (Gadget) */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static struct resource s3c_hsudc_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC), |
| [1] = DEFINE_RES_IRQ(IRQ_USBD), |
| }; |
| |
| struct platform_device s3c_device_usb_hsudc = { |
| .name = "s3c-hsudc", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_hsudc_resource), |
| .resource = s3c_hsudc_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd) |
| { |
| s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc); |
| pd->phy_init = s3c_hsudc_init_phy; |
| pd->phy_uninit = s3c_hsudc_uninit_phy; |
| } |
| #endif /* CONFIG_PLAT_S3C24XX */ |
| |
| /* WDT */ |
| |
| #ifdef CONFIG_S3C_DEV_WDT |
| static struct resource s3c_wdt_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K), |
| [1] = DEFINE_RES_IRQ(IRQ_WDT), |
| }; |
| |
| struct platform_device s3c_device_wdt = { |
| .name = "s3c2410-wdt", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(s3c_wdt_resource), |
| .resource = s3c_wdt_resource, |
| }; |
| #endif /* CONFIG_S3C_DEV_WDT */ |
| |
| #ifdef CONFIG_S3C64XX_DEV_SPI0 |
| static struct resource s3c64xx_spi0_resource[] = { |
| [0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256), |
| [1] = DEFINE_RES_IRQ(IRQ_SPI0), |
| }; |
| |
| struct platform_device s3c64xx_device_spi0 = { |
| .name = "s3c6410-spi", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource), |
| .resource = s3c64xx_spi0_resource, |
| .dev = { |
| .dma_mask = &samsung_device_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| void __init s3c64xx_spi0_set_platdata(int src_clk_nr, int num_cs) |
| { |
| struct s3c64xx_spi_info pd; |
| |
| /* Reject invalid configuration */ |
| if (!num_cs || src_clk_nr < 0) { |
| pr_err("%s: Invalid SPI configuration\n", __func__); |
| return; |
| } |
| |
| pd.num_cs = num_cs; |
| pd.src_clk_nr = src_clk_nr; |
| pd.cfg_gpio = s3c64xx_spi0_cfg_gpio; |
| |
| s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); |
| } |
| #endif /* CONFIG_S3C64XX_DEV_SPI0 */ |