| /* |
| * Copyright (c) 2015, Sony Mobile Communications AB. |
| * Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinmux.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| #include <linux/gpio.h> |
| #include <linux/interrupt.h> |
| #include <linux/of_device.h> |
| |
| #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> |
| |
| #include "../core.h" |
| #include "../pinctrl-utils.h" |
| |
| /* MPP registers */ |
| #define SSBI_REG_ADDR_MPP_BASE 0x50 |
| #define SSBI_REG_ADDR_MPP(n) (SSBI_REG_ADDR_MPP_BASE + n) |
| |
| /* MPP Type: type */ |
| #define PM8XXX_MPP_TYPE_D_INPUT 0 |
| #define PM8XXX_MPP_TYPE_D_OUTPUT 1 |
| #define PM8XXX_MPP_TYPE_D_BI_DIR 2 |
| #define PM8XXX_MPP_TYPE_A_INPUT 3 |
| #define PM8XXX_MPP_TYPE_A_OUTPUT 4 |
| #define PM8XXX_MPP_TYPE_SINK 5 |
| #define PM8XXX_MPP_TYPE_DTEST_SINK 6 |
| #define PM8XXX_MPP_TYPE_DTEST_OUTPUT 7 |
| |
| /* Digital Input: control */ |
| #define PM8XXX_MPP_DIN_TO_INT 0 |
| #define PM8XXX_MPP_DIN_TO_DBUS1 1 |
| #define PM8XXX_MPP_DIN_TO_DBUS2 2 |
| #define PM8XXX_MPP_DIN_TO_DBUS3 3 |
| |
| /* Digital Output: control */ |
| #define PM8XXX_MPP_DOUT_CTRL_LOW 0 |
| #define PM8XXX_MPP_DOUT_CTRL_HIGH 1 |
| #define PM8XXX_MPP_DOUT_CTRL_MPP 2 |
| #define PM8XXX_MPP_DOUT_CTRL_INV_MPP 3 |
| |
| /* Bidirectional: control */ |
| #define PM8XXX_MPP_BI_PULLUP_1KOHM 0 |
| #define PM8XXX_MPP_BI_PULLUP_OPEN 1 |
| #define PM8XXX_MPP_BI_PULLUP_10KOHM 2 |
| #define PM8XXX_MPP_BI_PULLUP_30KOHM 3 |
| |
| /* Analog Output: control */ |
| #define PM8XXX_MPP_AOUT_CTRL_DISABLE 0 |
| #define PM8XXX_MPP_AOUT_CTRL_ENABLE 1 |
| #define PM8XXX_MPP_AOUT_CTRL_MPP_HIGH_EN 2 |
| #define PM8XXX_MPP_AOUT_CTRL_MPP_LOW_EN 3 |
| |
| /* Current Sink: control */ |
| #define PM8XXX_MPP_CS_CTRL_DISABLE 0 |
| #define PM8XXX_MPP_CS_CTRL_ENABLE 1 |
| #define PM8XXX_MPP_CS_CTRL_MPP_HIGH_EN 2 |
| #define PM8XXX_MPP_CS_CTRL_MPP_LOW_EN 3 |
| |
| /* DTEST Current Sink: control */ |
| #define PM8XXX_MPP_DTEST_CS_CTRL_EN1 0 |
| #define PM8XXX_MPP_DTEST_CS_CTRL_EN2 1 |
| #define PM8XXX_MPP_DTEST_CS_CTRL_EN3 2 |
| #define PM8XXX_MPP_DTEST_CS_CTRL_EN4 3 |
| |
| /* DTEST Digital Output: control */ |
| #define PM8XXX_MPP_DTEST_DBUS1 0 |
| #define PM8XXX_MPP_DTEST_DBUS2 1 |
| #define PM8XXX_MPP_DTEST_DBUS3 2 |
| #define PM8XXX_MPP_DTEST_DBUS4 3 |
| |
| /* custom pinconf parameters */ |
| #define PM8XXX_CONFIG_AMUX (PIN_CONFIG_END + 1) |
| #define PM8XXX_CONFIG_DTEST_SELECTOR (PIN_CONFIG_END + 2) |
| #define PM8XXX_CONFIG_ALEVEL (PIN_CONFIG_END + 3) |
| #define PM8XXX_CONFIG_PAIRED (PIN_CONFIG_END + 4) |
| |
| /** |
| * struct pm8xxx_pin_data - dynamic configuration for a pin |
| * @reg: address of the control register |
| * @irq: IRQ from the PMIC interrupt controller |
| * @mode: operating mode for the pin (digital, analog or current sink) |
| * @input: pin is input |
| * @output: pin is output |
| * @high_z: pin is floating |
| * @paired: mpp operates in paired mode |
| * @output_value: logical output value of the mpp |
| * @power_source: selected power source |
| * @dtest: DTEST route selector |
| * @amux: input muxing in analog mode |
| * @aout_level: selector of the output in analog mode |
| * @drive_strength: drive strength of the current sink |
| * @pullup: pull up value, when in digital bidirectional mode |
| */ |
| struct pm8xxx_pin_data { |
| unsigned reg; |
| int irq; |
| |
| u8 mode; |
| |
| bool input; |
| bool output; |
| bool high_z; |
| bool paired; |
| bool output_value; |
| |
| u8 power_source; |
| u8 dtest; |
| u8 amux; |
| u8 aout_level; |
| u8 drive_strength; |
| unsigned pullup; |
| }; |
| |
| struct pm8xxx_mpp { |
| struct device *dev; |
| struct regmap *regmap; |
| struct pinctrl_dev *pctrl; |
| struct gpio_chip chip; |
| |
| struct pinctrl_desc desc; |
| unsigned npins; |
| }; |
| |
| static const struct pinconf_generic_params pm8xxx_mpp_bindings[] = { |
| {"qcom,amux-route", PM8XXX_CONFIG_AMUX, 0}, |
| {"qcom,analog-level", PM8XXX_CONFIG_ALEVEL, 0}, |
| {"qcom,dtest", PM8XXX_CONFIG_DTEST_SELECTOR, 0}, |
| {"qcom,paired", PM8XXX_CONFIG_PAIRED, 0}, |
| }; |
| |
| #ifdef CONFIG_DEBUG_FS |
| static const struct pin_config_item pm8xxx_conf_items[] = { |
| PCONFDUMP(PM8XXX_CONFIG_AMUX, "analog mux", NULL, true), |
| PCONFDUMP(PM8XXX_CONFIG_ALEVEL, "analog level", NULL, true), |
| PCONFDUMP(PM8XXX_CONFIG_DTEST_SELECTOR, "dtest", NULL, true), |
| PCONFDUMP(PM8XXX_CONFIG_PAIRED, "paired", NULL, false), |
| }; |
| #endif |
| |
| #define PM8XXX_MAX_MPPS 12 |
| static const char * const pm8xxx_groups[PM8XXX_MAX_MPPS] = { |
| "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", |
| "mpp9", "mpp10", "mpp11", "mpp12", |
| }; |
| |
| #define PM8XXX_MPP_DIGITAL 0 |
| #define PM8XXX_MPP_ANALOG 1 |
| #define PM8XXX_MPP_SINK 2 |
| |
| static const char * const pm8xxx_mpp_functions[] = { |
| "digital", "analog", "sink", |
| }; |
| |
| static int pm8xxx_mpp_update(struct pm8xxx_mpp *pctrl, |
| struct pm8xxx_pin_data *pin) |
| { |
| unsigned level; |
| unsigned ctrl; |
| unsigned type; |
| int ret; |
| u8 val; |
| |
| switch (pin->mode) { |
| case PM8XXX_MPP_DIGITAL: |
| if (pin->dtest) { |
| type = PM8XXX_MPP_TYPE_DTEST_OUTPUT; |
| ctrl = pin->dtest - 1; |
| } else if (pin->input && pin->output) { |
| type = PM8XXX_MPP_TYPE_D_BI_DIR; |
| if (pin->high_z) |
| ctrl = PM8XXX_MPP_BI_PULLUP_OPEN; |
| else if (pin->pullup == 600) |
| ctrl = PM8XXX_MPP_BI_PULLUP_1KOHM; |
| else if (pin->pullup == 10000) |
| ctrl = PM8XXX_MPP_BI_PULLUP_10KOHM; |
| else |
| ctrl = PM8XXX_MPP_BI_PULLUP_30KOHM; |
| } else if (pin->input) { |
| type = PM8XXX_MPP_TYPE_D_INPUT; |
| if (pin->dtest) |
| ctrl = pin->dtest; |
| else |
| ctrl = PM8XXX_MPP_DIN_TO_INT; |
| } else { |
| type = PM8XXX_MPP_TYPE_D_OUTPUT; |
| ctrl = !!pin->output_value; |
| if (pin->paired) |
| ctrl |= BIT(1); |
| } |
| |
| level = pin->power_source; |
| break; |
| case PM8XXX_MPP_ANALOG: |
| if (pin->output) { |
| type = PM8XXX_MPP_TYPE_A_OUTPUT; |
| level = pin->aout_level; |
| ctrl = pin->output_value; |
| if (pin->paired) |
| ctrl |= BIT(1); |
| } else { |
| type = PM8XXX_MPP_TYPE_A_INPUT; |
| level = pin->amux; |
| ctrl = 0; |
| } |
| break; |
| case PM8XXX_MPP_SINK: |
| level = (pin->drive_strength / 5) - 1; |
| if (pin->dtest) { |
| type = PM8XXX_MPP_TYPE_DTEST_SINK; |
| ctrl = pin->dtest - 1; |
| } else { |
| type = PM8XXX_MPP_TYPE_SINK; |
| ctrl = pin->output_value; |
| if (pin->paired) |
| ctrl |= BIT(1); |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| val = type << 5 | level << 2 | ctrl; |
| ret = regmap_write(pctrl->regmap, pin->reg, val); |
| if (ret) |
| dev_err(pctrl->dev, "failed to write register\n"); |
| |
| return ret; |
| } |
| |
| static int pm8xxx_get_groups_count(struct pinctrl_dev *pctldev) |
| { |
| struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| |
| return pctrl->npins; |
| } |
| |
| static const char *pm8xxx_get_group_name(struct pinctrl_dev *pctldev, |
| unsigned group) |
| { |
| return pm8xxx_groups[group]; |
| } |
| |
| |
| static int pm8xxx_get_group_pins(struct pinctrl_dev *pctldev, |
| unsigned group, |
| const unsigned **pins, |
| unsigned *num_pins) |
| { |
| struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| |
| *pins = &pctrl->desc.pins[group].number; |
| *num_pins = 1; |
| |
| return 0; |
| } |
| |
| static const struct pinctrl_ops pm8xxx_pinctrl_ops = { |
| .get_groups_count = pm8xxx_get_groups_count, |
| .get_group_name = pm8xxx_get_group_name, |
| .get_group_pins = pm8xxx_get_group_pins, |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_group, |
| .dt_free_map = pinctrl_utils_dt_free_map, |
| }; |
| |
| static int pm8xxx_get_functions_count(struct pinctrl_dev *pctldev) |
| { |
| return ARRAY_SIZE(pm8xxx_mpp_functions); |
| } |
| |
| static const char *pm8xxx_get_function_name(struct pinctrl_dev *pctldev, |
| unsigned function) |
| { |
| return pm8xxx_mpp_functions[function]; |
| } |
| |
| static int pm8xxx_get_function_groups(struct pinctrl_dev *pctldev, |
| unsigned function, |
| const char * const **groups, |
| unsigned * const num_groups) |
| { |
| struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| |
| *groups = pm8xxx_groups; |
| *num_groups = pctrl->npins; |
| return 0; |
| } |
| |
| static int pm8xxx_pinmux_set_mux(struct pinctrl_dev *pctldev, |
| unsigned function, |
| unsigned group) |
| { |
| struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| struct pm8xxx_pin_data *pin = pctrl->desc.pins[group].drv_data; |
| |
| pin->mode = function; |
| pm8xxx_mpp_update(pctrl, pin); |
| |
| return 0; |
| } |
| |
| static const struct pinmux_ops pm8xxx_pinmux_ops = { |
| .get_functions_count = pm8xxx_get_functions_count, |
| .get_function_name = pm8xxx_get_function_name, |
| .get_function_groups = pm8xxx_get_function_groups, |
| .set_mux = pm8xxx_pinmux_set_mux, |
| }; |
| |
| static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev, |
| unsigned int offset, |
| unsigned long *config) |
| { |
| struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| unsigned param = pinconf_to_config_param(*config); |
| unsigned arg; |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_PULL_UP: |
| arg = pin->pullup; |
| break; |
| case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: |
| arg = pin->high_z; |
| break; |
| case PIN_CONFIG_INPUT_ENABLE: |
| arg = pin->input; |
| break; |
| case PIN_CONFIG_OUTPUT: |
| arg = pin->output_value; |
| break; |
| case PIN_CONFIG_POWER_SOURCE: |
| arg = pin->power_source; |
| break; |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| arg = pin->drive_strength; |
| break; |
| case PM8XXX_CONFIG_DTEST_SELECTOR: |
| arg = pin->dtest; |
| break; |
| case PM8XXX_CONFIG_AMUX: |
| arg = pin->amux; |
| break; |
| case PM8XXX_CONFIG_ALEVEL: |
| arg = pin->aout_level; |
| break; |
| case PM8XXX_CONFIG_PAIRED: |
| arg = pin->paired; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *config = pinconf_to_config_packed(param, arg); |
| |
| return 0; |
| } |
| |
| static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev, |
| unsigned int offset, |
| unsigned long *configs, |
| unsigned num_configs) |
| { |
| struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| unsigned param; |
| unsigned arg; |
| unsigned i; |
| |
| for (i = 0; i < num_configs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| arg = pinconf_to_config_argument(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_PULL_UP: |
| pin->pullup = arg; |
| break; |
| case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: |
| pin->high_z = true; |
| break; |
| case PIN_CONFIG_INPUT_ENABLE: |
| pin->input = true; |
| break; |
| case PIN_CONFIG_OUTPUT: |
| pin->output = true; |
| pin->output_value = !!arg; |
| break; |
| case PIN_CONFIG_POWER_SOURCE: |
| pin->power_source = arg; |
| break; |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| pin->drive_strength = arg; |
| break; |
| case PM8XXX_CONFIG_DTEST_SELECTOR: |
| pin->dtest = arg; |
| break; |
| case PM8XXX_CONFIG_AMUX: |
| pin->amux = arg; |
| break; |
| case PM8XXX_CONFIG_ALEVEL: |
| pin->aout_level = arg; |
| break; |
| case PM8XXX_CONFIG_PAIRED: |
| pin->paired = !!arg; |
| break; |
| default: |
| dev_err(pctrl->dev, |
| "unsupported config parameter: %x\n", |
| param); |
| return -EINVAL; |
| } |
| } |
| |
| pm8xxx_mpp_update(pctrl, pin); |
| |
| return 0; |
| } |
| |
| static const struct pinconf_ops pm8xxx_pinconf_ops = { |
| .is_generic = true, |
| .pin_config_group_get = pm8xxx_pin_config_get, |
| .pin_config_group_set = pm8xxx_pin_config_set, |
| }; |
| |
| static struct pinctrl_desc pm8xxx_pinctrl_desc = { |
| .name = "pm8xxx_mpp", |
| .pctlops = &pm8xxx_pinctrl_ops, |
| .pmxops = &pm8xxx_pinmux_ops, |
| .confops = &pm8xxx_pinconf_ops, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int pm8xxx_mpp_direction_input(struct gpio_chip *chip, |
| unsigned offset) |
| { |
| struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| |
| switch (pin->mode) { |
| case PM8XXX_MPP_DIGITAL: |
| pin->input = true; |
| break; |
| case PM8XXX_MPP_ANALOG: |
| pin->input = true; |
| pin->output = true; |
| break; |
| case PM8XXX_MPP_SINK: |
| return -EINVAL; |
| } |
| |
| pm8xxx_mpp_update(pctrl, pin); |
| |
| return 0; |
| } |
| |
| static int pm8xxx_mpp_direction_output(struct gpio_chip *chip, |
| unsigned offset, |
| int value) |
| { |
| struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| |
| switch (pin->mode) { |
| case PM8XXX_MPP_DIGITAL: |
| pin->output = true; |
| break; |
| case PM8XXX_MPP_ANALOG: |
| pin->input = false; |
| pin->output = true; |
| break; |
| case PM8XXX_MPP_SINK: |
| pin->input = false; |
| pin->output = true; |
| break; |
| } |
| |
| pm8xxx_mpp_update(pctrl, pin); |
| |
| return 0; |
| } |
| |
| static int pm8xxx_mpp_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| bool state; |
| int ret; |
| |
| if (!pin->input) |
| return pin->output_value; |
| |
| ret = irq_get_irqchip_state(pin->irq, IRQCHIP_STATE_LINE_LEVEL, &state); |
| if (!ret) |
| ret = !!state; |
| |
| return ret; |
| } |
| |
| static void pm8xxx_mpp_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| |
| pin->output_value = !!value; |
| |
| pm8xxx_mpp_update(pctrl, pin); |
| } |
| |
| static int pm8xxx_mpp_of_xlate(struct gpio_chip *chip, |
| const struct of_phandle_args *gpio_desc, |
| u32 *flags) |
| { |
| if (chip->of_gpio_n_cells < 2) |
| return -EINVAL; |
| |
| if (flags) |
| *flags = gpio_desc->args[1]; |
| |
| return gpio_desc->args[0] - 1; |
| } |
| |
| |
| static int pm8xxx_mpp_to_irq(struct gpio_chip *chip, unsigned offset) |
| { |
| struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| |
| return pin->irq; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| #include <linux/seq_file.h> |
| |
| static void pm8xxx_mpp_dbg_show_one(struct seq_file *s, |
| struct pinctrl_dev *pctldev, |
| struct gpio_chip *chip, |
| unsigned offset, |
| unsigned gpio) |
| { |
| struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| |
| static const char * const aout_lvls[] = { |
| "1v25", "1v25_2", "0v625", "0v3125", "mpp", "abus1", "abus2", |
| "abus3" |
| }; |
| |
| static const char * const amuxs[] = { |
| "amux5", "amux6", "amux7", "amux8", "amux9", "abus1", "abus2", |
| "abus3", |
| }; |
| |
| seq_printf(s, " mpp%-2d:", offset + 1); |
| |
| switch (pin->mode) { |
| case PM8XXX_MPP_DIGITAL: |
| seq_puts(s, " digital "); |
| if (pin->dtest) { |
| seq_printf(s, "dtest%d\n", pin->dtest); |
| } else if (pin->input && pin->output) { |
| if (pin->high_z) |
| seq_puts(s, "bi-dir high-z"); |
| else |
| seq_printf(s, "bi-dir %dOhm", pin->pullup); |
| } else if (pin->input) { |
| if (pin->dtest) |
| seq_printf(s, "in dtest%d", pin->dtest); |
| else |
| seq_puts(s, "in gpio"); |
| } else if (pin->output) { |
| seq_puts(s, "out "); |
| |
| if (!pin->paired) { |
| seq_puts(s, pin->output_value ? |
| "high" : "low"); |
| } else { |
| seq_puts(s, pin->output_value ? |
| "inverted" : "follow"); |
| } |
| } |
| break; |
| case PM8XXX_MPP_ANALOG: |
| seq_puts(s, " analog "); |
| if (pin->output) { |
| seq_printf(s, "out %s ", aout_lvls[pin->aout_level]); |
| if (!pin->paired) { |
| seq_puts(s, pin->output_value ? |
| "high" : "low"); |
| } else { |
| seq_puts(s, pin->output_value ? |
| "inverted" : "follow"); |
| } |
| } else { |
| seq_printf(s, "input mux %s", amuxs[pin->amux]); |
| } |
| break; |
| case PM8XXX_MPP_SINK: |
| seq_printf(s, " sink %dmA ", pin->drive_strength); |
| if (pin->dtest) { |
| seq_printf(s, "dtest%d", pin->dtest); |
| } else { |
| if (!pin->paired) { |
| seq_puts(s, pin->output_value ? |
| "high" : "low"); |
| } else { |
| seq_puts(s, pin->output_value ? |
| "inverted" : "follow"); |
| } |
| } |
| break; |
| } |
| |
| } |
| |
| static void pm8xxx_mpp_dbg_show(struct seq_file *s, struct gpio_chip *chip) |
| { |
| unsigned gpio = chip->base; |
| unsigned i; |
| |
| for (i = 0; i < chip->ngpio; i++, gpio++) { |
| pm8xxx_mpp_dbg_show_one(s, NULL, chip, i, gpio); |
| seq_puts(s, "\n"); |
| } |
| } |
| |
| #else |
| #define msm_mpp_dbg_show NULL |
| #endif |
| |
| static struct gpio_chip pm8xxx_mpp_template = { |
| .direction_input = pm8xxx_mpp_direction_input, |
| .direction_output = pm8xxx_mpp_direction_output, |
| .get = pm8xxx_mpp_get, |
| .set = pm8xxx_mpp_set, |
| .of_xlate = pm8xxx_mpp_of_xlate, |
| .to_irq = pm8xxx_mpp_to_irq, |
| .dbg_show = pm8xxx_mpp_dbg_show, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl, |
| struct pm8xxx_pin_data *pin) |
| { |
| unsigned int val; |
| unsigned level; |
| unsigned ctrl; |
| unsigned type; |
| int ret; |
| |
| ret = regmap_read(pctrl->regmap, pin->reg, &val); |
| if (ret) { |
| dev_err(pctrl->dev, "failed to read register\n"); |
| return ret; |
| } |
| |
| type = (val >> 5) & 7; |
| level = (val >> 2) & 7; |
| ctrl = (val) & 3; |
| |
| switch (type) { |
| case PM8XXX_MPP_TYPE_D_INPUT: |
| pin->mode = PM8XXX_MPP_DIGITAL; |
| pin->input = true; |
| pin->power_source = level; |
| pin->dtest = ctrl; |
| break; |
| case PM8XXX_MPP_TYPE_D_OUTPUT: |
| pin->mode = PM8XXX_MPP_DIGITAL; |
| pin->output = true; |
| pin->power_source = level; |
| pin->output_value = !!(ctrl & BIT(0)); |
| pin->paired = !!(ctrl & BIT(1)); |
| break; |
| case PM8XXX_MPP_TYPE_D_BI_DIR: |
| pin->mode = PM8XXX_MPP_DIGITAL; |
| pin->input = true; |
| pin->output = true; |
| pin->power_source = level; |
| switch (ctrl) { |
| case PM8XXX_MPP_BI_PULLUP_1KOHM: |
| pin->pullup = 600; |
| break; |
| case PM8XXX_MPP_BI_PULLUP_OPEN: |
| pin->high_z = true; |
| break; |
| case PM8XXX_MPP_BI_PULLUP_10KOHM: |
| pin->pullup = 10000; |
| break; |
| case PM8XXX_MPP_BI_PULLUP_30KOHM: |
| pin->pullup = 30000; |
| break; |
| } |
| break; |
| case PM8XXX_MPP_TYPE_A_INPUT: |
| pin->mode = PM8XXX_MPP_ANALOG; |
| pin->input = true; |
| pin->amux = level; |
| break; |
| case PM8XXX_MPP_TYPE_A_OUTPUT: |
| pin->mode = PM8XXX_MPP_ANALOG; |
| pin->output = true; |
| pin->aout_level = level; |
| pin->output_value = !!(ctrl & BIT(0)); |
| pin->paired = !!(ctrl & BIT(1)); |
| break; |
| case PM8XXX_MPP_TYPE_SINK: |
| pin->mode = PM8XXX_MPP_SINK; |
| pin->drive_strength = 5 * (level + 1); |
| pin->output_value = !!(ctrl & BIT(0)); |
| pin->paired = !!(ctrl & BIT(1)); |
| break; |
| case PM8XXX_MPP_TYPE_DTEST_SINK: |
| pin->mode = PM8XXX_MPP_SINK; |
| pin->dtest = ctrl + 1; |
| pin->drive_strength = 5 * (level + 1); |
| break; |
| case PM8XXX_MPP_TYPE_DTEST_OUTPUT: |
| pin->mode = PM8XXX_MPP_DIGITAL; |
| pin->power_source = level; |
| if (ctrl >= 1) |
| pin->dtest = ctrl; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id pm8xxx_mpp_of_match[] = { |
| { .compatible = "qcom,pm8018-mpp", .data = (void *)6 }, |
| { .compatible = "qcom,pm8038-mpp", .data = (void *)6 }, |
| { .compatible = "qcom,pm8917-mpp", .data = (void *)10 }, |
| { .compatible = "qcom,pm8821-mpp", .data = (void *)4 }, |
| { .compatible = "qcom,pm8921-mpp", .data = (void *)12 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match); |
| |
| static int pm8xxx_mpp_probe(struct platform_device *pdev) |
| { |
| struct pm8xxx_pin_data *pin_data; |
| struct pinctrl_pin_desc *pins; |
| struct pm8xxx_mpp *pctrl; |
| int ret; |
| int i; |
| |
| pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); |
| if (!pctrl) |
| return -ENOMEM; |
| |
| pctrl->dev = &pdev->dev; |
| pctrl->npins = (unsigned)of_device_get_match_data(&pdev->dev); |
| |
| pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!pctrl->regmap) { |
| dev_err(&pdev->dev, "parent regmap unavailable\n"); |
| return -ENXIO; |
| } |
| |
| pctrl->desc = pm8xxx_pinctrl_desc; |
| pctrl->desc.npins = pctrl->npins; |
| |
| pins = devm_kcalloc(&pdev->dev, |
| pctrl->desc.npins, |
| sizeof(struct pinctrl_pin_desc), |
| GFP_KERNEL); |
| if (!pins) |
| return -ENOMEM; |
| |
| pin_data = devm_kcalloc(&pdev->dev, |
| pctrl->desc.npins, |
| sizeof(struct pm8xxx_pin_data), |
| GFP_KERNEL); |
| if (!pin_data) |
| return -ENOMEM; |
| |
| for (i = 0; i < pctrl->desc.npins; i++) { |
| pin_data[i].reg = SSBI_REG_ADDR_MPP(i); |
| pin_data[i].irq = platform_get_irq(pdev, i); |
| if (pin_data[i].irq < 0) { |
| dev_err(&pdev->dev, |
| "missing interrupts for pin %d\n", i); |
| return pin_data[i].irq; |
| } |
| |
| ret = pm8xxx_pin_populate(pctrl, &pin_data[i]); |
| if (ret) |
| return ret; |
| |
| pins[i].number = i; |
| pins[i].name = pm8xxx_groups[i]; |
| pins[i].drv_data = &pin_data[i]; |
| } |
| pctrl->desc.pins = pins; |
| |
| pctrl->desc.num_custom_params = ARRAY_SIZE(pm8xxx_mpp_bindings); |
| pctrl->desc.custom_params = pm8xxx_mpp_bindings; |
| #ifdef CONFIG_DEBUG_FS |
| pctrl->desc.custom_conf_items = pm8xxx_conf_items; |
| #endif |
| |
| pctrl->pctrl = pinctrl_register(&pctrl->desc, &pdev->dev, pctrl); |
| if (IS_ERR(pctrl->pctrl)) { |
| dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n"); |
| return PTR_ERR(pctrl->pctrl); |
| } |
| |
| pctrl->chip = pm8xxx_mpp_template; |
| pctrl->chip.base = -1; |
| pctrl->chip.dev = &pdev->dev; |
| pctrl->chip.of_node = pdev->dev.of_node; |
| pctrl->chip.of_gpio_n_cells = 2; |
| pctrl->chip.label = dev_name(pctrl->dev); |
| pctrl->chip.ngpio = pctrl->npins; |
| ret = gpiochip_add(&pctrl->chip); |
| if (ret) { |
| dev_err(&pdev->dev, "failed register gpiochip\n"); |
| goto unregister_pinctrl; |
| } |
| |
| ret = gpiochip_add_pin_range(&pctrl->chip, |
| dev_name(pctrl->dev), |
| 0, 0, pctrl->chip.ngpio); |
| if (ret) { |
| dev_err(pctrl->dev, "failed to add pin range\n"); |
| goto unregister_gpiochip; |
| } |
| |
| platform_set_drvdata(pdev, pctrl); |
| |
| dev_dbg(&pdev->dev, "Qualcomm pm8xxx mpp driver probed\n"); |
| |
| return 0; |
| |
| unregister_gpiochip: |
| gpiochip_remove(&pctrl->chip); |
| |
| unregister_pinctrl: |
| pinctrl_unregister(pctrl->pctrl); |
| |
| return ret; |
| } |
| |
| static int pm8xxx_mpp_remove(struct platform_device *pdev) |
| { |
| struct pm8xxx_mpp *pctrl = platform_get_drvdata(pdev); |
| |
| gpiochip_remove(&pctrl->chip); |
| |
| pinctrl_unregister(pctrl->pctrl); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pm8xxx_mpp_driver = { |
| .driver = { |
| .name = "qcom-ssbi-mpp", |
| .of_match_table = pm8xxx_mpp_of_match, |
| }, |
| .probe = pm8xxx_mpp_probe, |
| .remove = pm8xxx_mpp_remove, |
| }; |
| |
| module_platform_driver(pm8xxx_mpp_driver); |
| |
| MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>"); |
| MODULE_DESCRIPTION("Qualcomm PM8xxx MPP driver"); |
| MODULE_LICENSE("GPL v2"); |