| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/regulator/silergy,sy8827n.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: silergy sy8827n PMIC |
| |
| maintainers: |
| - Jisheng Zhang <jszhang@kernel.org> |
| |
| properties: |
| compatible: |
| enum: |
| - silergy,sy8827n |
| |
| reg: |
| maxItems: 1 |
| |
| enable-gpios: |
| description: GPIO to enable/disable the regulator. |
| maxItems: 1 |
| |
| silergy,vsel-state-high: |
| type: boolean |
| description: |
| Indicates if the VSEL pin is set to high. |
| If this property is missing, assume the VSEL pin is set to low. |
| |
| required: |
| - compatible |
| - reg |
| |
| examples: |
| - | |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| regulator@60 { |
| compatible = "silergy,sy8827n"; |
| reg = <0x60>; |
| }; |
| }; |
| |
| ... |
