| // SPDX-License-Identifier: GPL-2.0-only |
| //#define DEBUG |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/blkdev.h> |
| #include <linux/hdreg.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/interrupt.h> |
| #include <linux/virtio.h> |
| #include <linux/virtio_blk.h> |
| #include <linux/scatterlist.h> |
| #include <linux/string_helpers.h> |
| #include <linux/idr.h> |
| #include <linux/blk-mq.h> |
| #include <linux/blk-mq-virtio.h> |
| #include <linux/numa.h> |
| #include <linux/vmalloc.h> |
| #include <uapi/linux/virtio_ring.h> |
| |
| #define PART_BITS 4 |
| #define VQ_NAME_LEN 16 |
| #define MAX_DISCARD_SEGMENTS 256u |
| |
| /* The maximum number of sg elements that fit into a virtqueue */ |
| #define VIRTIO_BLK_MAX_SG_ELEMS 32768 |
| |
| #ifdef CONFIG_ARCH_NO_SG_CHAIN |
| #define VIRTIO_BLK_INLINE_SG_CNT 0 |
| #else |
| #define VIRTIO_BLK_INLINE_SG_CNT 2 |
| #endif |
| |
| static unsigned int num_request_queues; |
| module_param(num_request_queues, uint, 0644); |
| MODULE_PARM_DESC(num_request_queues, |
| "Limit the number of request queues to use for blk device. " |
| "0 for no limit. " |
| "Values > nr_cpu_ids truncated to nr_cpu_ids."); |
| |
| static unsigned int poll_queues; |
| module_param(poll_queues, uint, 0644); |
| MODULE_PARM_DESC(poll_queues, "The number of dedicated virtqueues for polling I/O"); |
| |
| static int major; |
| static DEFINE_IDA(vd_index_ida); |
| |
| static struct workqueue_struct *virtblk_wq; |
| |
| struct virtio_blk_vq { |
| struct virtqueue *vq; |
| spinlock_t lock; |
| char name[VQ_NAME_LEN]; |
| } ____cacheline_aligned_in_smp; |
| |
| struct virtio_blk { |
| /* |
| * This mutex must be held by anything that may run after |
| * virtblk_remove() sets vblk->vdev to NULL. |
| * |
| * blk-mq, virtqueue processing, and sysfs attribute code paths are |
| * shut down before vblk->vdev is set to NULL and therefore do not need |
| * to hold this mutex. |
| */ |
| struct mutex vdev_mutex; |
| struct virtio_device *vdev; |
| |
| /* The disk structure for the kernel. */ |
| struct gendisk *disk; |
| |
| /* Block layer tags. */ |
| struct blk_mq_tag_set tag_set; |
| |
| /* Process context for config space updates */ |
| struct work_struct config_work; |
| |
| /* Ida index - used to track minor number allocations. */ |
| int index; |
| |
| /* num of vqs */ |
| int num_vqs; |
| int io_queues[HCTX_MAX_TYPES]; |
| struct virtio_blk_vq *vqs; |
| |
| /* For zoned device */ |
| unsigned int zone_sectors; |
| }; |
| |
| struct virtblk_req { |
| /* Out header */ |
| struct virtio_blk_outhdr out_hdr; |
| |
| /* In header */ |
| union { |
| u8 status; |
| |
| /* |
| * The zone append command has an extended in header. |
| * The status field in zone_append_in_hdr must always |
| * be the last byte. |
| */ |
| struct { |
| __virtio64 sector; |
| u8 status; |
| } zone_append; |
| } in_hdr; |
| |
| size_t in_hdr_len; |
| |
| struct sg_table sg_table; |
| struct scatterlist sg[]; |
| }; |
| |
| static inline blk_status_t virtblk_result(u8 status) |
| { |
| switch (status) { |
| case VIRTIO_BLK_S_OK: |
| return BLK_STS_OK; |
| case VIRTIO_BLK_S_UNSUPP: |
| return BLK_STS_NOTSUPP; |
| case VIRTIO_BLK_S_ZONE_OPEN_RESOURCE: |
| return BLK_STS_ZONE_OPEN_RESOURCE; |
| case VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE: |
| return BLK_STS_ZONE_ACTIVE_RESOURCE; |
| case VIRTIO_BLK_S_IOERR: |
| case VIRTIO_BLK_S_ZONE_UNALIGNED_WP: |
| default: |
| return BLK_STS_IOERR; |
| } |
| } |
| |
| static inline struct virtio_blk_vq *get_virtio_blk_vq(struct blk_mq_hw_ctx *hctx) |
| { |
| struct virtio_blk *vblk = hctx->queue->queuedata; |
| struct virtio_blk_vq *vq = &vblk->vqs[hctx->queue_num]; |
| |
| return vq; |
| } |
| |
| static int virtblk_add_req(struct virtqueue *vq, struct virtblk_req *vbr) |
| { |
| struct scatterlist out_hdr, in_hdr, *sgs[3]; |
| unsigned int num_out = 0, num_in = 0; |
| |
| sg_init_one(&out_hdr, &vbr->out_hdr, sizeof(vbr->out_hdr)); |
| sgs[num_out++] = &out_hdr; |
| |
| if (vbr->sg_table.nents) { |
| if (vbr->out_hdr.type & cpu_to_virtio32(vq->vdev, VIRTIO_BLK_T_OUT)) |
| sgs[num_out++] = vbr->sg_table.sgl; |
| else |
| sgs[num_out + num_in++] = vbr->sg_table.sgl; |
| } |
| |
| sg_init_one(&in_hdr, &vbr->in_hdr.status, vbr->in_hdr_len); |
| sgs[num_out + num_in++] = &in_hdr; |
| |
| return virtqueue_add_sgs(vq, sgs, num_out, num_in, vbr, GFP_ATOMIC); |
| } |
| |
| static int virtblk_setup_discard_write_zeroes_erase(struct request *req, bool unmap) |
| { |
| unsigned short segments = blk_rq_nr_discard_segments(req); |
| unsigned short n = 0; |
| struct virtio_blk_discard_write_zeroes *range; |
| struct bio *bio; |
| u32 flags = 0; |
| |
| if (unmap) |
| flags |= VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP; |
| |
| range = kmalloc_array(segments, sizeof(*range), GFP_ATOMIC); |
| if (!range) |
| return -ENOMEM; |
| |
| /* |
| * Single max discard segment means multi-range discard isn't |
| * supported, and block layer only runs contiguity merge like |
| * normal RW request. So we can't reply on bio for retrieving |
| * each range info. |
| */ |
| if (queue_max_discard_segments(req->q) == 1) { |
| range[0].flags = cpu_to_le32(flags); |
| range[0].num_sectors = cpu_to_le32(blk_rq_sectors(req)); |
| range[0].sector = cpu_to_le64(blk_rq_pos(req)); |
| n = 1; |
| } else { |
| __rq_for_each_bio(bio, req) { |
| u64 sector = bio->bi_iter.bi_sector; |
| u32 num_sectors = bio->bi_iter.bi_size >> SECTOR_SHIFT; |
| |
| range[n].flags = cpu_to_le32(flags); |
| range[n].num_sectors = cpu_to_le32(num_sectors); |
| range[n].sector = cpu_to_le64(sector); |
| n++; |
| } |
| } |
| |
| WARN_ON_ONCE(n != segments); |
| |
| bvec_set_virt(&req->special_vec, range, sizeof(*range) * segments); |
| req->rq_flags |= RQF_SPECIAL_PAYLOAD; |
| |
| return 0; |
| } |
| |
| static void virtblk_unmap_data(struct request *req, struct virtblk_req *vbr) |
| { |
| if (blk_rq_nr_phys_segments(req)) |
| sg_free_table_chained(&vbr->sg_table, |
| VIRTIO_BLK_INLINE_SG_CNT); |
| } |
| |
| static int virtblk_map_data(struct blk_mq_hw_ctx *hctx, struct request *req, |
| struct virtblk_req *vbr) |
| { |
| int err; |
| |
| if (!blk_rq_nr_phys_segments(req)) |
| return 0; |
| |
| vbr->sg_table.sgl = vbr->sg; |
| err = sg_alloc_table_chained(&vbr->sg_table, |
| blk_rq_nr_phys_segments(req), |
| vbr->sg_table.sgl, |
| VIRTIO_BLK_INLINE_SG_CNT); |
| if (unlikely(err)) |
| return -ENOMEM; |
| |
| return blk_rq_map_sg(hctx->queue, req, vbr->sg_table.sgl); |
| } |
| |
| static void virtblk_cleanup_cmd(struct request *req) |
| { |
| if (req->rq_flags & RQF_SPECIAL_PAYLOAD) |
| kfree(bvec_virt(&req->special_vec)); |
| } |
| |
| static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev, |
| struct request *req, |
| struct virtblk_req *vbr) |
| { |
| size_t in_hdr_len = sizeof(vbr->in_hdr.status); |
| bool unmap = false; |
| u32 type; |
| u64 sector = 0; |
| |
| if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED) && op_is_zone_mgmt(req_op(req))) |
| return BLK_STS_NOTSUPP; |
| |
| /* Set fields for all request types */ |
| vbr->out_hdr.ioprio = cpu_to_virtio32(vdev, req_get_ioprio(req)); |
| |
| switch (req_op(req)) { |
| case REQ_OP_READ: |
| type = VIRTIO_BLK_T_IN; |
| sector = blk_rq_pos(req); |
| break; |
| case REQ_OP_WRITE: |
| type = VIRTIO_BLK_T_OUT; |
| sector = blk_rq_pos(req); |
| break; |
| case REQ_OP_FLUSH: |
| type = VIRTIO_BLK_T_FLUSH; |
| break; |
| case REQ_OP_DISCARD: |
| type = VIRTIO_BLK_T_DISCARD; |
| break; |
| case REQ_OP_WRITE_ZEROES: |
| type = VIRTIO_BLK_T_WRITE_ZEROES; |
| unmap = !(req->cmd_flags & REQ_NOUNMAP); |
| break; |
| case REQ_OP_SECURE_ERASE: |
| type = VIRTIO_BLK_T_SECURE_ERASE; |
| break; |
| case REQ_OP_ZONE_OPEN: |
| type = VIRTIO_BLK_T_ZONE_OPEN; |
| sector = blk_rq_pos(req); |
| break; |
| case REQ_OP_ZONE_CLOSE: |
| type = VIRTIO_BLK_T_ZONE_CLOSE; |
| sector = blk_rq_pos(req); |
| break; |
| case REQ_OP_ZONE_FINISH: |
| type = VIRTIO_BLK_T_ZONE_FINISH; |
| sector = blk_rq_pos(req); |
| break; |
| case REQ_OP_ZONE_APPEND: |
| type = VIRTIO_BLK_T_ZONE_APPEND; |
| sector = blk_rq_pos(req); |
| in_hdr_len = sizeof(vbr->in_hdr.zone_append); |
| break; |
| case REQ_OP_ZONE_RESET: |
| type = VIRTIO_BLK_T_ZONE_RESET; |
| sector = blk_rq_pos(req); |
| break; |
| case REQ_OP_ZONE_RESET_ALL: |
| type = VIRTIO_BLK_T_ZONE_RESET_ALL; |
| break; |
| case REQ_OP_DRV_IN: |
| /* |
| * Out header has already been prepared by the caller (virtblk_get_id() |
| * or virtblk_submit_zone_report()), nothing to do here. |
| */ |
| return 0; |
| default: |
| WARN_ON_ONCE(1); |
| return BLK_STS_IOERR; |
| } |
| |
| /* Set fields for non-REQ_OP_DRV_IN request types */ |
| vbr->in_hdr_len = in_hdr_len; |
| vbr->out_hdr.type = cpu_to_virtio32(vdev, type); |
| vbr->out_hdr.sector = cpu_to_virtio64(vdev, sector); |
| |
| if (type == VIRTIO_BLK_T_DISCARD || type == VIRTIO_BLK_T_WRITE_ZEROES || |
| type == VIRTIO_BLK_T_SECURE_ERASE) { |
| if (virtblk_setup_discard_write_zeroes_erase(req, unmap)) |
| return BLK_STS_RESOURCE; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * The status byte is always the last byte of the virtblk request |
| * in-header. This helper fetches its value for all in-header formats |
| * that are currently defined. |
| */ |
| static inline u8 virtblk_vbr_status(struct virtblk_req *vbr) |
| { |
| return *((u8 *)&vbr->in_hdr + vbr->in_hdr_len - 1); |
| } |
| |
| static inline void virtblk_request_done(struct request *req) |
| { |
| struct virtblk_req *vbr = blk_mq_rq_to_pdu(req); |
| blk_status_t status = virtblk_result(virtblk_vbr_status(vbr)); |
| struct virtio_blk *vblk = req->mq_hctx->queue->queuedata; |
| |
| virtblk_unmap_data(req, vbr); |
| virtblk_cleanup_cmd(req); |
| |
| if (req_op(req) == REQ_OP_ZONE_APPEND) |
| req->__sector = virtio64_to_cpu(vblk->vdev, |
| vbr->in_hdr.zone_append.sector); |
| |
| blk_mq_end_request(req, status); |
| } |
| |
| static void virtblk_done(struct virtqueue *vq) |
| { |
| struct virtio_blk *vblk = vq->vdev->priv; |
| bool req_done = false; |
| int qid = vq->index; |
| struct virtblk_req *vbr; |
| unsigned long flags; |
| unsigned int len; |
| |
| spin_lock_irqsave(&vblk->vqs[qid].lock, flags); |
| do { |
| virtqueue_disable_cb(vq); |
| while ((vbr = virtqueue_get_buf(vblk->vqs[qid].vq, &len)) != NULL) { |
| struct request *req = blk_mq_rq_from_pdu(vbr); |
| |
| if (likely(!blk_should_fake_timeout(req->q))) |
| blk_mq_complete_request(req); |
| req_done = true; |
| } |
| } while (!virtqueue_enable_cb(vq)); |
| |
| /* In case queue is stopped waiting for more buffers. */ |
| if (req_done) |
| blk_mq_start_stopped_hw_queues(vblk->disk->queue, true); |
| spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags); |
| } |
| |
| static void virtio_commit_rqs(struct blk_mq_hw_ctx *hctx) |
| { |
| struct virtio_blk *vblk = hctx->queue->queuedata; |
| struct virtio_blk_vq *vq = &vblk->vqs[hctx->queue_num]; |
| bool kick; |
| |
| spin_lock_irq(&vq->lock); |
| kick = virtqueue_kick_prepare(vq->vq); |
| spin_unlock_irq(&vq->lock); |
| |
| if (kick) |
| virtqueue_notify(vq->vq); |
| } |
| |
| static blk_status_t virtblk_fail_to_queue(struct request *req, int rc) |
| { |
| virtblk_cleanup_cmd(req); |
| switch (rc) { |
| case -ENOSPC: |
| return BLK_STS_DEV_RESOURCE; |
| case -ENOMEM: |
| return BLK_STS_RESOURCE; |
| default: |
| return BLK_STS_IOERR; |
| } |
| } |
| |
| static blk_status_t virtblk_prep_rq(struct blk_mq_hw_ctx *hctx, |
| struct virtio_blk *vblk, |
| struct request *req, |
| struct virtblk_req *vbr) |
| { |
| blk_status_t status; |
| int num; |
| |
| status = virtblk_setup_cmd(vblk->vdev, req, vbr); |
| if (unlikely(status)) |
| return status; |
| |
| num = virtblk_map_data(hctx, req, vbr); |
| if (unlikely(num < 0)) |
| return virtblk_fail_to_queue(req, -ENOMEM); |
| vbr->sg_table.nents = num; |
| |
| blk_mq_start_request(req); |
| |
| return BLK_STS_OK; |
| } |
| |
| static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx, |
| const struct blk_mq_queue_data *bd) |
| { |
| struct virtio_blk *vblk = hctx->queue->queuedata; |
| struct request *req = bd->rq; |
| struct virtblk_req *vbr = blk_mq_rq_to_pdu(req); |
| unsigned long flags; |
| int qid = hctx->queue_num; |
| bool notify = false; |
| blk_status_t status; |
| int err; |
| |
| status = virtblk_prep_rq(hctx, vblk, req, vbr); |
| if (unlikely(status)) |
| return status; |
| |
| spin_lock_irqsave(&vblk->vqs[qid].lock, flags); |
| err = virtblk_add_req(vblk->vqs[qid].vq, vbr); |
| if (err) { |
| virtqueue_kick(vblk->vqs[qid].vq); |
| /* Don't stop the queue if -ENOMEM: we may have failed to |
| * bounce the buffer due to global resource outage. |
| */ |
| if (err == -ENOSPC) |
| blk_mq_stop_hw_queue(hctx); |
| spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags); |
| virtblk_unmap_data(req, vbr); |
| return virtblk_fail_to_queue(req, err); |
| } |
| |
| if (bd->last && virtqueue_kick_prepare(vblk->vqs[qid].vq)) |
| notify = true; |
| spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags); |
| |
| if (notify) |
| virtqueue_notify(vblk->vqs[qid].vq); |
| return BLK_STS_OK; |
| } |
| |
| static bool virtblk_prep_rq_batch(struct request *req) |
| { |
| struct virtio_blk *vblk = req->mq_hctx->queue->queuedata; |
| struct virtblk_req *vbr = blk_mq_rq_to_pdu(req); |
| |
| return virtblk_prep_rq(req->mq_hctx, vblk, req, vbr) == BLK_STS_OK; |
| } |
| |
| static bool virtblk_add_req_batch(struct virtio_blk_vq *vq, |
| struct request **rqlist) |
| { |
| unsigned long flags; |
| int err; |
| bool kick; |
| |
| spin_lock_irqsave(&vq->lock, flags); |
| |
| while (!rq_list_empty(*rqlist)) { |
| struct request *req = rq_list_pop(rqlist); |
| struct virtblk_req *vbr = blk_mq_rq_to_pdu(req); |
| |
| err = virtblk_add_req(vq->vq, vbr); |
| if (err) { |
| virtblk_unmap_data(req, vbr); |
| virtblk_cleanup_cmd(req); |
| blk_mq_requeue_request(req, true); |
| } |
| } |
| |
| kick = virtqueue_kick_prepare(vq->vq); |
| spin_unlock_irqrestore(&vq->lock, flags); |
| |
| return kick; |
| } |
| |
| static void virtio_queue_rqs(struct request **rqlist) |
| { |
| struct request *req, *next, *prev = NULL; |
| struct request *requeue_list = NULL; |
| |
| rq_list_for_each_safe(rqlist, req, next) { |
| struct virtio_blk_vq *vq = get_virtio_blk_vq(req->mq_hctx); |
| bool kick; |
| |
| if (!virtblk_prep_rq_batch(req)) { |
| rq_list_move(rqlist, &requeue_list, req, prev); |
| req = prev; |
| if (!req) |
| continue; |
| } |
| |
| if (!next || req->mq_hctx != next->mq_hctx) { |
| req->rq_next = NULL; |
| kick = virtblk_add_req_batch(vq, rqlist); |
| if (kick) |
| virtqueue_notify(vq->vq); |
| |
| *rqlist = next; |
| prev = NULL; |
| } else |
| prev = req; |
| } |
| |
| *rqlist = requeue_list; |
| } |
| |
| #ifdef CONFIG_BLK_DEV_ZONED |
| static void *virtblk_alloc_report_buffer(struct virtio_blk *vblk, |
| unsigned int nr_zones, |
| size_t *buflen) |
| { |
| struct request_queue *q = vblk->disk->queue; |
| size_t bufsize; |
| void *buf; |
| |
| nr_zones = min_t(unsigned int, nr_zones, |
| get_capacity(vblk->disk) >> ilog2(vblk->zone_sectors)); |
| |
| bufsize = sizeof(struct virtio_blk_zone_report) + |
| nr_zones * sizeof(struct virtio_blk_zone_descriptor); |
| bufsize = min_t(size_t, bufsize, |
| queue_max_hw_sectors(q) << SECTOR_SHIFT); |
| bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT); |
| |
| while (bufsize >= sizeof(struct virtio_blk_zone_report)) { |
| buf = __vmalloc(bufsize, GFP_KERNEL | __GFP_NORETRY); |
| if (buf) { |
| *buflen = bufsize; |
| return buf; |
| } |
| bufsize >>= 1; |
| } |
| |
| return NULL; |
| } |
| |
| static int virtblk_submit_zone_report(struct virtio_blk *vblk, |
| char *report_buf, size_t report_len, |
| sector_t sector) |
| { |
| struct request_queue *q = vblk->disk->queue; |
| struct request *req; |
| struct virtblk_req *vbr; |
| int err; |
| |
| req = blk_mq_alloc_request(q, REQ_OP_DRV_IN, 0); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| |
| vbr = blk_mq_rq_to_pdu(req); |
| vbr->in_hdr_len = sizeof(vbr->in_hdr.status); |
| vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_ZONE_REPORT); |
| vbr->out_hdr.sector = cpu_to_virtio64(vblk->vdev, sector); |
| |
| err = blk_rq_map_kern(q, req, report_buf, report_len, GFP_KERNEL); |
| if (err) |
| goto out; |
| |
| blk_execute_rq(req, false); |
| err = blk_status_to_errno(virtblk_result(vbr->in_hdr.status)); |
| out: |
| blk_mq_free_request(req); |
| return err; |
| } |
| |
| static int virtblk_parse_zone(struct virtio_blk *vblk, |
| struct virtio_blk_zone_descriptor *entry, |
| unsigned int idx, report_zones_cb cb, void *data) |
| { |
| struct blk_zone zone = { }; |
| |
| zone.start = virtio64_to_cpu(vblk->vdev, entry->z_start); |
| if (zone.start + vblk->zone_sectors <= get_capacity(vblk->disk)) |
| zone.len = vblk->zone_sectors; |
| else |
| zone.len = get_capacity(vblk->disk) - zone.start; |
| zone.capacity = virtio64_to_cpu(vblk->vdev, entry->z_cap); |
| zone.wp = virtio64_to_cpu(vblk->vdev, entry->z_wp); |
| |
| switch (entry->z_type) { |
| case VIRTIO_BLK_ZT_SWR: |
| zone.type = BLK_ZONE_TYPE_SEQWRITE_REQ; |
| break; |
| case VIRTIO_BLK_ZT_SWP: |
| zone.type = BLK_ZONE_TYPE_SEQWRITE_PREF; |
| break; |
| case VIRTIO_BLK_ZT_CONV: |
| zone.type = BLK_ZONE_TYPE_CONVENTIONAL; |
| break; |
| default: |
| dev_err(&vblk->vdev->dev, "zone %llu: invalid type %#x\n", |
| zone.start, entry->z_type); |
| return -EIO; |
| } |
| |
| switch (entry->z_state) { |
| case VIRTIO_BLK_ZS_EMPTY: |
| zone.cond = BLK_ZONE_COND_EMPTY; |
| break; |
| case VIRTIO_BLK_ZS_CLOSED: |
| zone.cond = BLK_ZONE_COND_CLOSED; |
| break; |
| case VIRTIO_BLK_ZS_FULL: |
| zone.cond = BLK_ZONE_COND_FULL; |
| zone.wp = zone.start + zone.len; |
| break; |
| case VIRTIO_BLK_ZS_EOPEN: |
| zone.cond = BLK_ZONE_COND_EXP_OPEN; |
| break; |
| case VIRTIO_BLK_ZS_IOPEN: |
| zone.cond = BLK_ZONE_COND_IMP_OPEN; |
| break; |
| case VIRTIO_BLK_ZS_NOT_WP: |
| zone.cond = BLK_ZONE_COND_NOT_WP; |
| break; |
| case VIRTIO_BLK_ZS_RDONLY: |
| zone.cond = BLK_ZONE_COND_READONLY; |
| zone.wp = ULONG_MAX; |
| break; |
| case VIRTIO_BLK_ZS_OFFLINE: |
| zone.cond = BLK_ZONE_COND_OFFLINE; |
| zone.wp = ULONG_MAX; |
| break; |
| default: |
| dev_err(&vblk->vdev->dev, "zone %llu: invalid condition %#x\n", |
| zone.start, entry->z_state); |
| return -EIO; |
| } |
| |
| /* |
| * The callback below checks the validity of the reported |
| * entry data, no need to further validate it here. |
| */ |
| return cb(&zone, idx, data); |
| } |
| |
| static int virtblk_report_zones(struct gendisk *disk, sector_t sector, |
| unsigned int nr_zones, report_zones_cb cb, |
| void *data) |
| { |
| struct virtio_blk *vblk = disk->private_data; |
| struct virtio_blk_zone_report *report; |
| unsigned long long nz, i; |
| size_t buflen; |
| unsigned int zone_idx = 0; |
| int ret; |
| |
| if (WARN_ON_ONCE(!vblk->zone_sectors)) |
| return -EOPNOTSUPP; |
| |
| report = virtblk_alloc_report_buffer(vblk, nr_zones, &buflen); |
| if (!report) |
| return -ENOMEM; |
| |
| mutex_lock(&vblk->vdev_mutex); |
| |
| if (!vblk->vdev) { |
| ret = -ENXIO; |
| goto fail_report; |
| } |
| |
| while (zone_idx < nr_zones && sector < get_capacity(vblk->disk)) { |
| memset(report, 0, buflen); |
| |
| ret = virtblk_submit_zone_report(vblk, (char *)report, |
| buflen, sector); |
| if (ret) |
| goto fail_report; |
| |
| nz = min_t(u64, virtio64_to_cpu(vblk->vdev, report->nr_zones), |
| nr_zones); |
| if (!nz) |
| break; |
| |
| for (i = 0; i < nz && zone_idx < nr_zones; i++) { |
| ret = virtblk_parse_zone(vblk, &report->zones[i], |
| zone_idx, cb, data); |
| if (ret) |
| goto fail_report; |
| |
| sector = virtio64_to_cpu(vblk->vdev, |
| report->zones[i].z_start) + |
| vblk->zone_sectors; |
| zone_idx++; |
| } |
| } |
| |
| if (zone_idx > 0) |
| ret = zone_idx; |
| else |
| ret = -EINVAL; |
| fail_report: |
| mutex_unlock(&vblk->vdev_mutex); |
| kvfree(report); |
| return ret; |
| } |
| |
| static int virtblk_probe_zoned_device(struct virtio_device *vdev, |
| struct virtio_blk *vblk, |
| struct request_queue *q) |
| { |
| u32 v, wg; |
| |
| dev_dbg(&vdev->dev, "probing host-managed zoned device\n"); |
| |
| disk_set_zoned(vblk->disk); |
| blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q); |
| |
| virtio_cread(vdev, struct virtio_blk_config, |
| zoned.max_open_zones, &v); |
| disk_set_max_open_zones(vblk->disk, v); |
| dev_dbg(&vdev->dev, "max open zones = %u\n", v); |
| |
| virtio_cread(vdev, struct virtio_blk_config, |
| zoned.max_active_zones, &v); |
| disk_set_max_active_zones(vblk->disk, v); |
| dev_dbg(&vdev->dev, "max active zones = %u\n", v); |
| |
| virtio_cread(vdev, struct virtio_blk_config, |
| zoned.write_granularity, &wg); |
| if (!wg) { |
| dev_warn(&vdev->dev, "zero write granularity reported\n"); |
| return -ENODEV; |
| } |
| blk_queue_physical_block_size(q, wg); |
| blk_queue_io_min(q, wg); |
| |
| dev_dbg(&vdev->dev, "write granularity = %u\n", wg); |
| |
| /* |
| * virtio ZBD specification doesn't require zones to be a power of |
| * two sectors in size, but the code in this driver expects that. |
| */ |
| virtio_cread(vdev, struct virtio_blk_config, zoned.zone_sectors, |
| &vblk->zone_sectors); |
| if (vblk->zone_sectors == 0 || !is_power_of_2(vblk->zone_sectors)) { |
| dev_err(&vdev->dev, |
| "zoned device with non power of two zone size %u\n", |
| vblk->zone_sectors); |
| return -ENODEV; |
| } |
| blk_queue_chunk_sectors(q, vblk->zone_sectors); |
| dev_dbg(&vdev->dev, "zone sectors = %u\n", vblk->zone_sectors); |
| |
| if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) { |
| dev_warn(&vblk->vdev->dev, |
| "ignoring negotiated F_DISCARD for zoned device\n"); |
| blk_queue_max_discard_sectors(q, 0); |
| } |
| |
| virtio_cread(vdev, struct virtio_blk_config, |
| zoned.max_append_sectors, &v); |
| if (!v) { |
| dev_warn(&vdev->dev, "zero max_append_sectors reported\n"); |
| return -ENODEV; |
| } |
| if ((v << SECTOR_SHIFT) < wg) { |
| dev_err(&vdev->dev, |
| "write granularity %u exceeds max_append_sectors %u limit\n", |
| wg, v); |
| return -ENODEV; |
| } |
| blk_queue_max_zone_append_sectors(q, v); |
| dev_dbg(&vdev->dev, "max append sectors = %u\n", v); |
| |
| return blk_revalidate_disk_zones(vblk->disk, NULL); |
| } |
| |
| #else |
| |
| /* |
| * Zoned block device support is not configured in this kernel. |
| * Host-managed zoned devices can't be supported, but others are |
| * good to go as regular block devices. |
| */ |
| #define virtblk_report_zones NULL |
| |
| static inline int virtblk_probe_zoned_device(struct virtio_device *vdev, |
| struct virtio_blk *vblk, struct request_queue *q) |
| { |
| dev_err(&vdev->dev, |
| "virtio_blk: zoned devices are not supported"); |
| return -EOPNOTSUPP; |
| } |
| #endif /* CONFIG_BLK_DEV_ZONED */ |
| |
| /* return id (s/n) string for *disk to *id_str |
| */ |
| static int virtblk_get_id(struct gendisk *disk, char *id_str) |
| { |
| struct virtio_blk *vblk = disk->private_data; |
| struct request_queue *q = vblk->disk->queue; |
| struct request *req; |
| struct virtblk_req *vbr; |
| int err; |
| |
| req = blk_mq_alloc_request(q, REQ_OP_DRV_IN, 0); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| |
| vbr = blk_mq_rq_to_pdu(req); |
| vbr->in_hdr_len = sizeof(vbr->in_hdr.status); |
| vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_GET_ID); |
| vbr->out_hdr.sector = 0; |
| |
| err = blk_rq_map_kern(q, req, id_str, VIRTIO_BLK_ID_BYTES, GFP_KERNEL); |
| if (err) |
| goto out; |
| |
| blk_execute_rq(req, false); |
| err = blk_status_to_errno(virtblk_result(vbr->in_hdr.status)); |
| out: |
| blk_mq_free_request(req); |
| return err; |
| } |
| |
| /* We provide getgeo only to please some old bootloader/partitioning tools */ |
| static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo) |
| { |
| struct virtio_blk *vblk = bd->bd_disk->private_data; |
| int ret = 0; |
| |
| mutex_lock(&vblk->vdev_mutex); |
| |
| if (!vblk->vdev) { |
| ret = -ENXIO; |
| goto out; |
| } |
| |
| /* see if the host passed in geometry config */ |
| if (virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_GEOMETRY)) { |
| virtio_cread(vblk->vdev, struct virtio_blk_config, |
| geometry.cylinders, &geo->cylinders); |
| virtio_cread(vblk->vdev, struct virtio_blk_config, |
| geometry.heads, &geo->heads); |
| virtio_cread(vblk->vdev, struct virtio_blk_config, |
| geometry.sectors, &geo->sectors); |
| } else { |
| /* some standard values, similar to sd */ |
| geo->heads = 1 << 6; |
| geo->sectors = 1 << 5; |
| geo->cylinders = get_capacity(bd->bd_disk) >> 11; |
| } |
| out: |
| mutex_unlock(&vblk->vdev_mutex); |
| return ret; |
| } |
| |
| static void virtblk_free_disk(struct gendisk *disk) |
| { |
| struct virtio_blk *vblk = disk->private_data; |
| |
| ida_free(&vd_index_ida, vblk->index); |
| mutex_destroy(&vblk->vdev_mutex); |
| kfree(vblk); |
| } |
| |
| static const struct block_device_operations virtblk_fops = { |
| .owner = THIS_MODULE, |
| .getgeo = virtblk_getgeo, |
| .free_disk = virtblk_free_disk, |
| .report_zones = virtblk_report_zones, |
| }; |
| |
| static int index_to_minor(int index) |
| { |
| return index << PART_BITS; |
| } |
| |
| static int minor_to_index(int minor) |
| { |
| return minor >> PART_BITS; |
| } |
| |
| static ssize_t serial_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct gendisk *disk = dev_to_disk(dev); |
| int err; |
| |
| /* sysfs gives us a PAGE_SIZE buffer */ |
| BUILD_BUG_ON(PAGE_SIZE < VIRTIO_BLK_ID_BYTES); |
| |
| buf[VIRTIO_BLK_ID_BYTES] = '\0'; |
| err = virtblk_get_id(disk, buf); |
| if (!err) |
| return strlen(buf); |
| |
| if (err == -EIO) /* Unsupported? Make it empty. */ |
| return 0; |
| |
| return err; |
| } |
| |
| static DEVICE_ATTR_RO(serial); |
| |
| /* The queue's logical block size must be set before calling this */ |
| static void virtblk_update_capacity(struct virtio_blk *vblk, bool resize) |
| { |
| struct virtio_device *vdev = vblk->vdev; |
| struct request_queue *q = vblk->disk->queue; |
| char cap_str_2[10], cap_str_10[10]; |
| unsigned long long nblocks; |
| u64 capacity; |
| |
| /* Host must always specify the capacity. */ |
| virtio_cread(vdev, struct virtio_blk_config, capacity, &capacity); |
| |
| nblocks = DIV_ROUND_UP_ULL(capacity, queue_logical_block_size(q) >> 9); |
| |
| string_get_size(nblocks, queue_logical_block_size(q), |
| STRING_UNITS_2, cap_str_2, sizeof(cap_str_2)); |
| string_get_size(nblocks, queue_logical_block_size(q), |
| STRING_UNITS_10, cap_str_10, sizeof(cap_str_10)); |
| |
| dev_notice(&vdev->dev, |
| "[%s] %s%llu %d-byte logical blocks (%s/%s)\n", |
| vblk->disk->disk_name, |
| resize ? "new size: " : "", |
| nblocks, |
| queue_logical_block_size(q), |
| cap_str_10, |
| cap_str_2); |
| |
| set_capacity_and_notify(vblk->disk, capacity); |
| } |
| |
| static void virtblk_config_changed_work(struct work_struct *work) |
| { |
| struct virtio_blk *vblk = |
| container_of(work, struct virtio_blk, config_work); |
| |
| virtblk_update_capacity(vblk, true); |
| } |
| |
| static void virtblk_config_changed(struct virtio_device *vdev) |
| { |
| struct virtio_blk *vblk = vdev->priv; |
| |
| queue_work(virtblk_wq, &vblk->config_work); |
| } |
| |
| static int init_vq(struct virtio_blk *vblk) |
| { |
| int err; |
| unsigned short i; |
| vq_callback_t **callbacks; |
| const char **names; |
| struct virtqueue **vqs; |
| unsigned short num_vqs; |
| unsigned short num_poll_vqs; |
| struct virtio_device *vdev = vblk->vdev; |
| struct irq_affinity desc = { 0, }; |
| |
| err = virtio_cread_feature(vdev, VIRTIO_BLK_F_MQ, |
| struct virtio_blk_config, num_queues, |
| &num_vqs); |
| if (err) |
| num_vqs = 1; |
| |
| if (!err && !num_vqs) { |
| dev_err(&vdev->dev, "MQ advertised but zero queues reported\n"); |
| return -EINVAL; |
| } |
| |
| num_vqs = min_t(unsigned int, |
| min_not_zero(num_request_queues, nr_cpu_ids), |
| num_vqs); |
| |
| num_poll_vqs = min_t(unsigned int, poll_queues, num_vqs - 1); |
| |
| vblk->io_queues[HCTX_TYPE_DEFAULT] = num_vqs - num_poll_vqs; |
| vblk->io_queues[HCTX_TYPE_READ] = 0; |
| vblk->io_queues[HCTX_TYPE_POLL] = num_poll_vqs; |
| |
| dev_info(&vdev->dev, "%d/%d/%d default/read/poll queues\n", |
| vblk->io_queues[HCTX_TYPE_DEFAULT], |
| vblk->io_queues[HCTX_TYPE_READ], |
| vblk->io_queues[HCTX_TYPE_POLL]); |
| |
| vblk->vqs = kmalloc_array(num_vqs, sizeof(*vblk->vqs), GFP_KERNEL); |
| if (!vblk->vqs) |
| return -ENOMEM; |
| |
| names = kmalloc_array(num_vqs, sizeof(*names), GFP_KERNEL); |
| callbacks = kmalloc_array(num_vqs, sizeof(*callbacks), GFP_KERNEL); |
| vqs = kmalloc_array(num_vqs, sizeof(*vqs), GFP_KERNEL); |
| if (!names || !callbacks || !vqs) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| for (i = 0; i < num_vqs - num_poll_vqs; i++) { |
| callbacks[i] = virtblk_done; |
| snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req.%u", i); |
| names[i] = vblk->vqs[i].name; |
| } |
| |
| for (; i < num_vqs; i++) { |
| callbacks[i] = NULL; |
| snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%u", i); |
| names[i] = vblk->vqs[i].name; |
| } |
| |
| /* Discover virtqueues and write information to configuration. */ |
| err = virtio_find_vqs(vdev, num_vqs, vqs, callbacks, names, &desc); |
| if (err) |
| goto out; |
| |
| for (i = 0; i < num_vqs; i++) { |
| spin_lock_init(&vblk->vqs[i].lock); |
| vblk->vqs[i].vq = vqs[i]; |
| } |
| vblk->num_vqs = num_vqs; |
| |
| out: |
| kfree(vqs); |
| kfree(callbacks); |
| kfree(names); |
| if (err) |
| kfree(vblk->vqs); |
| return err; |
| } |
| |
| /* |
| * Legacy naming scheme used for virtio devices. We are stuck with it for |
| * virtio blk but don't ever use it for any new driver. |
| */ |
| static int virtblk_name_format(char *prefix, int index, char *buf, int buflen) |
| { |
| const int base = 'z' - 'a' + 1; |
| char *begin = buf + strlen(prefix); |
| char *end = buf + buflen; |
| char *p; |
| int unit; |
| |
| p = end - 1; |
| *p = '\0'; |
| unit = base; |
| do { |
| if (p == begin) |
| return -EINVAL; |
| *--p = 'a' + (index % unit); |
| index = (index / unit) - 1; |
| } while (index >= 0); |
| |
| memmove(begin, p, end - p); |
| memcpy(buf, prefix, strlen(prefix)); |
| |
| return 0; |
| } |
| |
| static int virtblk_get_cache_mode(struct virtio_device *vdev) |
| { |
| u8 writeback; |
| int err; |
| |
| err = virtio_cread_feature(vdev, VIRTIO_BLK_F_CONFIG_WCE, |
| struct virtio_blk_config, wce, |
| &writeback); |
| |
| /* |
| * If WCE is not configurable and flush is not available, |
| * assume no writeback cache is in use. |
| */ |
| if (err) |
| writeback = virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH); |
| |
| return writeback; |
| } |
| |
| static void virtblk_update_cache_mode(struct virtio_device *vdev) |
| { |
| u8 writeback = virtblk_get_cache_mode(vdev); |
| struct virtio_blk *vblk = vdev->priv; |
| |
| blk_queue_write_cache(vblk->disk->queue, writeback, false); |
| } |
| |
| static const char *const virtblk_cache_types[] = { |
| "write through", "write back" |
| }; |
| |
| static ssize_t |
| cache_type_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct gendisk *disk = dev_to_disk(dev); |
| struct virtio_blk *vblk = disk->private_data; |
| struct virtio_device *vdev = vblk->vdev; |
| int i; |
| |
| BUG_ON(!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_CONFIG_WCE)); |
| i = sysfs_match_string(virtblk_cache_types, buf); |
| if (i < 0) |
| return i; |
| |
| virtio_cwrite8(vdev, offsetof(struct virtio_blk_config, wce), i); |
| virtblk_update_cache_mode(vdev); |
| return count; |
| } |
| |
| static ssize_t |
| cache_type_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct gendisk *disk = dev_to_disk(dev); |
| struct virtio_blk *vblk = disk->private_data; |
| u8 writeback = virtblk_get_cache_mode(vblk->vdev); |
| |
| BUG_ON(writeback >= ARRAY_SIZE(virtblk_cache_types)); |
| return sysfs_emit(buf, "%s\n", virtblk_cache_types[writeback]); |
| } |
| |
| static DEVICE_ATTR_RW(cache_type); |
| |
| static struct attribute *virtblk_attrs[] = { |
| &dev_attr_serial.attr, |
| &dev_attr_cache_type.attr, |
| NULL, |
| }; |
| |
| static umode_t virtblk_attrs_are_visible(struct kobject *kobj, |
| struct attribute *a, int n) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct gendisk *disk = dev_to_disk(dev); |
| struct virtio_blk *vblk = disk->private_data; |
| struct virtio_device *vdev = vblk->vdev; |
| |
| if (a == &dev_attr_cache_type.attr && |
| !virtio_has_feature(vdev, VIRTIO_BLK_F_CONFIG_WCE)) |
| return S_IRUGO; |
| |
| return a->mode; |
| } |
| |
| static const struct attribute_group virtblk_attr_group = { |
| .attrs = virtblk_attrs, |
| .is_visible = virtblk_attrs_are_visible, |
| }; |
| |
| static const struct attribute_group *virtblk_attr_groups[] = { |
| &virtblk_attr_group, |
| NULL, |
| }; |
| |
| static void virtblk_map_queues(struct blk_mq_tag_set *set) |
| { |
| struct virtio_blk *vblk = set->driver_data; |
| int i, qoff; |
| |
| for (i = 0, qoff = 0; i < set->nr_maps; i++) { |
| struct blk_mq_queue_map *map = &set->map[i]; |
| |
| map->nr_queues = vblk->io_queues[i]; |
| map->queue_offset = qoff; |
| qoff += map->nr_queues; |
| |
| if (map->nr_queues == 0) |
| continue; |
| |
| /* |
| * Regular queues have interrupts and hence CPU affinity is |
| * defined by the core virtio code, but polling queues have |
| * no interrupts so we let the block layer assign CPU affinity. |
| */ |
| if (i == HCTX_TYPE_POLL) |
| blk_mq_map_queues(&set->map[i]); |
| else |
| blk_mq_virtio_map_queues(&set->map[i], vblk->vdev, 0); |
| } |
| } |
| |
| static void virtblk_complete_batch(struct io_comp_batch *iob) |
| { |
| struct request *req; |
| |
| rq_list_for_each(&iob->req_list, req) { |
| virtblk_unmap_data(req, blk_mq_rq_to_pdu(req)); |
| virtblk_cleanup_cmd(req); |
| } |
| blk_mq_end_request_batch(iob); |
| } |
| |
| static int virtblk_poll(struct blk_mq_hw_ctx *hctx, struct io_comp_batch *iob) |
| { |
| struct virtio_blk *vblk = hctx->queue->queuedata; |
| struct virtio_blk_vq *vq = get_virtio_blk_vq(hctx); |
| struct virtblk_req *vbr; |
| unsigned long flags; |
| unsigned int len; |
| int found = 0; |
| |
| spin_lock_irqsave(&vq->lock, flags); |
| |
| while ((vbr = virtqueue_get_buf(vq->vq, &len)) != NULL) { |
| struct request *req = blk_mq_rq_from_pdu(vbr); |
| |
| found++; |
| if (!blk_mq_complete_request_remote(req) && |
| !blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), |
| virtblk_complete_batch)) |
| virtblk_request_done(req); |
| } |
| |
| if (found) |
| blk_mq_start_stopped_hw_queues(vblk->disk->queue, true); |
| |
| spin_unlock_irqrestore(&vq->lock, flags); |
| |
| return found; |
| } |
| |
| static const struct blk_mq_ops virtio_mq_ops = { |
| .queue_rq = virtio_queue_rq, |
| .queue_rqs = virtio_queue_rqs, |
| .commit_rqs = virtio_commit_rqs, |
| .complete = virtblk_request_done, |
| .map_queues = virtblk_map_queues, |
| .poll = virtblk_poll, |
| }; |
| |
| static unsigned int virtblk_queue_depth; |
| module_param_named(queue_depth, virtblk_queue_depth, uint, 0444); |
| |
| static int virtblk_probe(struct virtio_device *vdev) |
| { |
| struct virtio_blk *vblk; |
| struct request_queue *q; |
| int err, index; |
| |
| u32 v, blk_size, max_size, sg_elems, opt_io_size; |
| u32 max_discard_segs = 0; |
| u32 discard_granularity = 0; |
| u16 min_io_size; |
| u8 physical_block_exp, alignment_offset; |
| unsigned int queue_depth; |
| size_t max_dma_size; |
| |
| if (!vdev->config->get) { |
| dev_err(&vdev->dev, "%s failure: config access disabled\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| err = ida_alloc_range(&vd_index_ida, 0, |
| minor_to_index(1 << MINORBITS) - 1, GFP_KERNEL); |
| if (err < 0) |
| goto out; |
| index = err; |
| |
| /* We need to know how many segments before we allocate. */ |
| err = virtio_cread_feature(vdev, VIRTIO_BLK_F_SEG_MAX, |
| struct virtio_blk_config, seg_max, |
| &sg_elems); |
| |
| /* We need at least one SG element, whatever they say. */ |
| if (err || !sg_elems) |
| sg_elems = 1; |
| |
| /* Prevent integer overflows and honor max vq size */ |
| sg_elems = min_t(u32, sg_elems, VIRTIO_BLK_MAX_SG_ELEMS - 2); |
| |
| vdev->priv = vblk = kmalloc(sizeof(*vblk), GFP_KERNEL); |
| if (!vblk) { |
| err = -ENOMEM; |
| goto out_free_index; |
| } |
| |
| mutex_init(&vblk->vdev_mutex); |
| |
| vblk->vdev = vdev; |
| |
| INIT_WORK(&vblk->config_work, virtblk_config_changed_work); |
| |
| err = init_vq(vblk); |
| if (err) |
| goto out_free_vblk; |
| |
| /* Default queue sizing is to fill the ring. */ |
| if (!virtblk_queue_depth) { |
| queue_depth = vblk->vqs[0].vq->num_free; |
| /* ... but without indirect descs, we use 2 descs per req */ |
| if (!virtio_has_feature(vdev, VIRTIO_RING_F_INDIRECT_DESC)) |
| queue_depth /= 2; |
| } else { |
| queue_depth = virtblk_queue_depth; |
| } |
| |
| memset(&vblk->tag_set, 0, sizeof(vblk->tag_set)); |
| vblk->tag_set.ops = &virtio_mq_ops; |
| vblk->tag_set.queue_depth = queue_depth; |
| vblk->tag_set.numa_node = NUMA_NO_NODE; |
| vblk->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; |
| vblk->tag_set.cmd_size = |
| sizeof(struct virtblk_req) + |
| sizeof(struct scatterlist) * VIRTIO_BLK_INLINE_SG_CNT; |
| vblk->tag_set.driver_data = vblk; |
| vblk->tag_set.nr_hw_queues = vblk->num_vqs; |
| vblk->tag_set.nr_maps = 1; |
| if (vblk->io_queues[HCTX_TYPE_POLL]) |
| vblk->tag_set.nr_maps = 3; |
| |
| err = blk_mq_alloc_tag_set(&vblk->tag_set); |
| if (err) |
| goto out_free_vq; |
| |
| vblk->disk = blk_mq_alloc_disk(&vblk->tag_set, vblk); |
| if (IS_ERR(vblk->disk)) { |
| err = PTR_ERR(vblk->disk); |
| goto out_free_tags; |
| } |
| q = vblk->disk->queue; |
| |
| virtblk_name_format("vd", index, vblk->disk->disk_name, DISK_NAME_LEN); |
| |
| vblk->disk->major = major; |
| vblk->disk->first_minor = index_to_minor(index); |
| vblk->disk->minors = 1 << PART_BITS; |
| vblk->disk->private_data = vblk; |
| vblk->disk->fops = &virtblk_fops; |
| vblk->index = index; |
| |
| /* configure queue flush support */ |
| virtblk_update_cache_mode(vdev); |
| |
| /* If disk is read-only in the host, the guest should obey */ |
| if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO)) |
| set_disk_ro(vblk->disk, 1); |
| |
| /* We can handle whatever the host told us to handle. */ |
| blk_queue_max_segments(q, sg_elems); |
| |
| /* No real sector limit. */ |
| blk_queue_max_hw_sectors(q, UINT_MAX); |
| |
| max_dma_size = virtio_max_dma_size(vdev); |
| max_size = max_dma_size > U32_MAX ? U32_MAX : max_dma_size; |
| |
| /* Host can optionally specify maximum segment size and number of |
| * segments. */ |
| err = virtio_cread_feature(vdev, VIRTIO_BLK_F_SIZE_MAX, |
| struct virtio_blk_config, size_max, &v); |
| if (!err) |
| max_size = min(max_size, v); |
| |
| blk_queue_max_segment_size(q, max_size); |
| |
| /* Host can optionally specify the block size of the device */ |
| err = virtio_cread_feature(vdev, VIRTIO_BLK_F_BLK_SIZE, |
| struct virtio_blk_config, blk_size, |
| &blk_size); |
| if (!err) { |
| err = blk_validate_block_size(blk_size); |
| if (err) { |
| dev_err(&vdev->dev, |
| "virtio_blk: invalid block size: 0x%x\n", |
| blk_size); |
| goto out_cleanup_disk; |
| } |
| |
| blk_queue_logical_block_size(q, blk_size); |
| } else |
| blk_size = queue_logical_block_size(q); |
| |
| /* Use topology information if available */ |
| err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY, |
| struct virtio_blk_config, physical_block_exp, |
| &physical_block_exp); |
| if (!err && physical_block_exp) |
| blk_queue_physical_block_size(q, |
| blk_size * (1 << physical_block_exp)); |
| |
| err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY, |
| struct virtio_blk_config, alignment_offset, |
| &alignment_offset); |
| if (!err && alignment_offset) |
| blk_queue_alignment_offset(q, blk_size * alignment_offset); |
| |
| err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY, |
| struct virtio_blk_config, min_io_size, |
| &min_io_size); |
| if (!err && min_io_size) |
| blk_queue_io_min(q, blk_size * min_io_size); |
| |
| err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY, |
| struct virtio_blk_config, opt_io_size, |
| &opt_io_size); |
| if (!err && opt_io_size) |
| blk_queue_io_opt(q, blk_size * opt_io_size); |
| |
| if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) { |
| virtio_cread(vdev, struct virtio_blk_config, |
| discard_sector_alignment, &discard_granularity); |
| |
| virtio_cread(vdev, struct virtio_blk_config, |
| max_discard_sectors, &v); |
| blk_queue_max_discard_sectors(q, v ? v : UINT_MAX); |
| |
| virtio_cread(vdev, struct virtio_blk_config, max_discard_seg, |
| &max_discard_segs); |
| } |
| |
| if (virtio_has_feature(vdev, VIRTIO_BLK_F_WRITE_ZEROES)) { |
| virtio_cread(vdev, struct virtio_blk_config, |
| max_write_zeroes_sectors, &v); |
| blk_queue_max_write_zeroes_sectors(q, v ? v : UINT_MAX); |
| } |
| |
| /* The discard and secure erase limits are combined since the Linux |
| * block layer uses the same limit for both commands. |
| * |
| * If both VIRTIO_BLK_F_SECURE_ERASE and VIRTIO_BLK_F_DISCARD features |
| * are negotiated, we will use the minimum between the limits. |
| * |
| * discard sector alignment is set to the minimum between discard_sector_alignment |
| * and secure_erase_sector_alignment. |
| * |
| * max discard sectors is set to the minimum between max_discard_seg and |
| * max_secure_erase_seg. |
| */ |
| if (virtio_has_feature(vdev, VIRTIO_BLK_F_SECURE_ERASE)) { |
| |
| virtio_cread(vdev, struct virtio_blk_config, |
| secure_erase_sector_alignment, &v); |
| |
| /* secure_erase_sector_alignment should not be zero, the device should set a |
| * valid number of sectors. |
| */ |
| if (!v) { |
| dev_err(&vdev->dev, |
| "virtio_blk: secure_erase_sector_alignment can't be 0\n"); |
| err = -EINVAL; |
| goto out_cleanup_disk; |
| } |
| |
| discard_granularity = min_not_zero(discard_granularity, v); |
| |
| virtio_cread(vdev, struct virtio_blk_config, |
| max_secure_erase_sectors, &v); |
| |
| /* max_secure_erase_sectors should not be zero, the device should set a |
| * valid number of sectors. |
| */ |
| if (!v) { |
| dev_err(&vdev->dev, |
| "virtio_blk: max_secure_erase_sectors can't be 0\n"); |
| err = -EINVAL; |
| goto out_cleanup_disk; |
| } |
| |
| blk_queue_max_secure_erase_sectors(q, v); |
| |
| virtio_cread(vdev, struct virtio_blk_config, |
| max_secure_erase_seg, &v); |
| |
| /* max_secure_erase_seg should not be zero, the device should set a |
| * valid number of segments |
| */ |
| if (!v) { |
| dev_err(&vdev->dev, |
| "virtio_blk: max_secure_erase_seg can't be 0\n"); |
| err = -EINVAL; |
| goto out_cleanup_disk; |
| } |
| |
| max_discard_segs = min_not_zero(max_discard_segs, v); |
| } |
| |
| if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD) || |
| virtio_has_feature(vdev, VIRTIO_BLK_F_SECURE_ERASE)) { |
| /* max_discard_seg and discard_granularity will be 0 only |
| * if max_discard_seg and discard_sector_alignment fields in the virtio |
| * config are 0 and VIRTIO_BLK_F_SECURE_ERASE feature is not negotiated. |
| * In this case, we use default values. |
| */ |
| if (!max_discard_segs) |
| max_discard_segs = sg_elems; |
| |
| blk_queue_max_discard_segments(q, |
| min(max_discard_segs, MAX_DISCARD_SEGMENTS)); |
| |
| if (discard_granularity) |
| q->limits.discard_granularity = discard_granularity << SECTOR_SHIFT; |
| else |
| q->limits.discard_granularity = blk_size; |
| } |
| |
| virtblk_update_capacity(vblk, false); |
| virtio_device_ready(vdev); |
| |
| /* |
| * All steps that follow use the VQs therefore they need to be |
| * placed after the virtio_device_ready() call above. |
| */ |
| if (virtio_has_feature(vdev, VIRTIO_BLK_F_ZONED)) { |
| u8 model; |
| |
| virtio_cread(vdev, struct virtio_blk_config, zoned.model, |
| &model); |
| switch (model) { |
| case VIRTIO_BLK_Z_NONE: |
| case VIRTIO_BLK_Z_HA: |
| /* Present the host-aware device as non-zoned */ |
| break; |
| case VIRTIO_BLK_Z_HM: |
| err = virtblk_probe_zoned_device(vdev, vblk, q); |
| if (err) |
| goto out_cleanup_disk; |
| break; |
| default: |
| dev_err(&vdev->dev, "unsupported zone model %d\n", |
| model); |
| err = -EINVAL; |
| goto out_cleanup_disk; |
| } |
| } |
| |
| err = device_add_disk(&vdev->dev, vblk->disk, virtblk_attr_groups); |
| if (err) |
| goto out_cleanup_disk; |
| |
| return 0; |
| |
| out_cleanup_disk: |
| put_disk(vblk->disk); |
| out_free_tags: |
| blk_mq_free_tag_set(&vblk->tag_set); |
| out_free_vq: |
| vdev->config->del_vqs(vdev); |
| kfree(vblk->vqs); |
| out_free_vblk: |
| kfree(vblk); |
| out_free_index: |
| ida_free(&vd_index_ida, index); |
| out: |
| return err; |
| } |
| |
| static void virtblk_remove(struct virtio_device *vdev) |
| { |
| struct virtio_blk *vblk = vdev->priv; |
| |
| /* Make sure no work handler is accessing the device. */ |
| flush_work(&vblk->config_work); |
| |
| del_gendisk(vblk->disk); |
| blk_mq_free_tag_set(&vblk->tag_set); |
| |
| mutex_lock(&vblk->vdev_mutex); |
| |
| /* Stop all the virtqueues. */ |
| virtio_reset_device(vdev); |
| |
| /* Virtqueues are stopped, nothing can use vblk->vdev anymore. */ |
| vblk->vdev = NULL; |
| |
| vdev->config->del_vqs(vdev); |
| kfree(vblk->vqs); |
| |
| mutex_unlock(&vblk->vdev_mutex); |
| |
| put_disk(vblk->disk); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int virtblk_freeze(struct virtio_device *vdev) |
| { |
| struct virtio_blk *vblk = vdev->priv; |
| |
| /* Ensure no requests in virtqueues before deleting vqs. */ |
| blk_mq_freeze_queue(vblk->disk->queue); |
| |
| /* Ensure we don't receive any more interrupts */ |
| virtio_reset_device(vdev); |
| |
| /* Make sure no work handler is accessing the device. */ |
| flush_work(&vblk->config_work); |
| |
| vdev->config->del_vqs(vdev); |
| kfree(vblk->vqs); |
| |
| return 0; |
| } |
| |
| static int virtblk_restore(struct virtio_device *vdev) |
| { |
| struct virtio_blk *vblk = vdev->priv; |
| int ret; |
| |
| ret = init_vq(vdev->priv); |
| if (ret) |
| return ret; |
| |
| virtio_device_ready(vdev); |
| |
| blk_mq_unfreeze_queue(vblk->disk->queue); |
| return 0; |
| } |
| #endif |
| |
| static const struct virtio_device_id id_table[] = { |
| { VIRTIO_ID_BLOCK, VIRTIO_DEV_ANY_ID }, |
| { 0 }, |
| }; |
| |
| static unsigned int features_legacy[] = { |
| VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, |
| VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, |
| VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, VIRTIO_BLK_F_CONFIG_WCE, |
| VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, VIRTIO_BLK_F_WRITE_ZEROES, |
| VIRTIO_BLK_F_SECURE_ERASE, |
| } |
| ; |
| static unsigned int features[] = { |
| VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, |
| VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, |
| VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, VIRTIO_BLK_F_CONFIG_WCE, |
| VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, VIRTIO_BLK_F_WRITE_ZEROES, |
| VIRTIO_BLK_F_SECURE_ERASE, VIRTIO_BLK_F_ZONED, |
| }; |
| |
| static struct virtio_driver virtio_blk = { |
| .feature_table = features, |
| .feature_table_size = ARRAY_SIZE(features), |
| .feature_table_legacy = features_legacy, |
| .feature_table_size_legacy = ARRAY_SIZE(features_legacy), |
| .driver.name = KBUILD_MODNAME, |
| .driver.owner = THIS_MODULE, |
| .id_table = id_table, |
| .probe = virtblk_probe, |
| .remove = virtblk_remove, |
| .config_changed = virtblk_config_changed, |
| #ifdef CONFIG_PM_SLEEP |
| .freeze = virtblk_freeze, |
| .restore = virtblk_restore, |
| #endif |
| }; |
| |
| static int __init virtio_blk_init(void) |
| { |
| int error; |
| |
| virtblk_wq = alloc_workqueue("virtio-blk", 0, 0); |
| if (!virtblk_wq) |
| return -ENOMEM; |
| |
| major = register_blkdev(0, "virtblk"); |
| if (major < 0) { |
| error = major; |
| goto out_destroy_workqueue; |
| } |
| |
| error = register_virtio_driver(&virtio_blk); |
| if (error) |
| goto out_unregister_blkdev; |
| return 0; |
| |
| out_unregister_blkdev: |
| unregister_blkdev(major, "virtblk"); |
| out_destroy_workqueue: |
| destroy_workqueue(virtblk_wq); |
| return error; |
| } |
| |
| static void __exit virtio_blk_fini(void) |
| { |
| unregister_virtio_driver(&virtio_blk); |
| unregister_blkdev(major, "virtblk"); |
| destroy_workqueue(virtblk_wq); |
| } |
| module_init(virtio_blk_init); |
| module_exit(virtio_blk_fini); |
| |
| MODULE_DEVICE_TABLE(virtio, id_table); |
| MODULE_DESCRIPTION("Virtio block driver"); |
| MODULE_LICENSE("GPL"); |