| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Synaptics NavPoint (PXA27x SSP/SPI) driver. |
| * |
| * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/input.h> |
| #include <linux/input/navpoint.h> |
| #include <linux/interrupt.h> |
| #include <linux/mutex.h> |
| #include <linux/pxa2xx_ssp.h> |
| #include <linux/slab.h> |
| |
| /* |
| * Synaptics Modular Embedded Protocol: Module Packet Format. |
| * Module header byte 2:0 = Length (# bytes that follow) |
| * Module header byte 4:3 = Control |
| * Module header byte 7:5 = Module Address |
| */ |
| #define HEADER_LENGTH(byte) ((byte) & 0x07) |
| #define HEADER_CONTROL(byte) (((byte) >> 3) & 0x03) |
| #define HEADER_ADDRESS(byte) ((byte) >> 5) |
| |
| struct navpoint { |
| struct ssp_device *ssp; |
| struct input_dev *input; |
| struct device *dev; |
| struct gpio_desc *gpiod; |
| int index; |
| u8 data[1 + HEADER_LENGTH(0xff)]; |
| }; |
| |
| /* |
| * Initialization values for SSCR0_x, SSCR1_x, SSSR_x. |
| */ |
| static const u32 sscr0 = 0 |
| | SSCR0_TUM /* TIM = 1; No TUR interrupts */ |
| | SSCR0_RIM /* RIM = 1; No ROR interrupts */ |
| | SSCR0_SSE /* SSE = 1; SSP enabled */ |
| | SSCR0_Motorola /* FRF = 0; Motorola SPI */ |
| | SSCR0_DataSize(16) /* DSS = 15; Data size = 16-bit */ |
| ; |
| static const u32 sscr1 = 0 |
| | SSCR1_SCFR /* SCFR = 1; SSPSCLK only during transfers */ |
| | SSCR1_SCLKDIR /* SCLKDIR = 1; Slave mode */ |
| | SSCR1_SFRMDIR /* SFRMDIR = 1; Slave mode */ |
| | SSCR1_RWOT /* RWOT = 1; Receive without transmit mode */ |
| | SSCR1_RxTresh(1) /* RFT = 0; Receive FIFO threshold = 1 */ |
| | SSCR1_SPH /* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */ |
| | SSCR1_RIE /* RIE = 1; Receive FIFO interrupt enabled */ |
| ; |
| static const u32 sssr = 0 |
| | SSSR_BCE /* BCE = 1; Clear BCE */ |
| | SSSR_TUR /* TUR = 1; Clear TUR */ |
| | SSSR_EOC /* EOC = 1; Clear EOC */ |
| | SSSR_TINT /* TINT = 1; Clear TINT */ |
| | SSSR_PINT /* PINT = 1; Clear PINT */ |
| | SSSR_ROR /* ROR = 1; Clear ROR */ |
| ; |
| |
| /* |
| * MEP Query $22: Touchpad Coordinate Range Query is not supported by |
| * the NavPoint module, so sampled values provide the default limits. |
| */ |
| #define NAVPOINT_X_MIN 1278 |
| #define NAVPOINT_X_MAX 5340 |
| #define NAVPOINT_Y_MIN 1572 |
| #define NAVPOINT_Y_MAX 4396 |
| #define NAVPOINT_PRESSURE_MIN 0 |
| #define NAVPOINT_PRESSURE_MAX 255 |
| |
| static void navpoint_packet(struct navpoint *navpoint) |
| { |
| int finger; |
| int gesture; |
| int x, y, z; |
| |
| switch (navpoint->data[0]) { |
| case 0xff: /* Garbage (packet?) between reset and Hello packet */ |
| case 0x00: /* Module 0, NULL packet */ |
| break; |
| |
| case 0x0e: /* Module 0, Absolute packet */ |
| finger = (navpoint->data[1] & 0x01); |
| gesture = (navpoint->data[1] & 0x02); |
| x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3]; |
| y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5]; |
| z = navpoint->data[6]; |
| input_report_key(navpoint->input, BTN_TOUCH, finger); |
| input_report_abs(navpoint->input, ABS_X, x); |
| input_report_abs(navpoint->input, ABS_Y, y); |
| input_report_abs(navpoint->input, ABS_PRESSURE, z); |
| input_report_key(navpoint->input, BTN_TOOL_FINGER, finger); |
| input_report_key(navpoint->input, BTN_LEFT, gesture); |
| input_sync(navpoint->input); |
| break; |
| |
| case 0x19: /* Module 0, Hello packet */ |
| if ((navpoint->data[1] & 0xf0) == 0x10) |
| break; |
| fallthrough; |
| default: |
| dev_warn(navpoint->dev, |
| "spurious packet: data=0x%02x,0x%02x,...\n", |
| navpoint->data[0], navpoint->data[1]); |
| break; |
| } |
| } |
| |
| static irqreturn_t navpoint_irq(int irq, void *dev_id) |
| { |
| struct navpoint *navpoint = dev_id; |
| struct ssp_device *ssp = navpoint->ssp; |
| irqreturn_t ret = IRQ_NONE; |
| u32 status; |
| |
| status = pxa_ssp_read_reg(ssp, SSSR); |
| if (status & sssr) { |
| dev_warn(navpoint->dev, |
| "unexpected interrupt: status=0x%08x\n", status); |
| pxa_ssp_write_reg(ssp, SSSR, (status & sssr)); |
| ret = IRQ_HANDLED; |
| } |
| |
| while (status & SSSR_RNE) { |
| u32 data; |
| |
| data = pxa_ssp_read_reg(ssp, SSDR); |
| navpoint->data[navpoint->index + 0] = (data >> 8); |
| navpoint->data[navpoint->index + 1] = data; |
| navpoint->index += 2; |
| if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) { |
| navpoint_packet(navpoint); |
| navpoint->index = 0; |
| } |
| status = pxa_ssp_read_reg(ssp, SSSR); |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| } |
| |
| static void navpoint_up(struct navpoint *navpoint) |
| { |
| struct ssp_device *ssp = navpoint->ssp; |
| int timeout; |
| |
| clk_prepare_enable(ssp->clk); |
| |
| pxa_ssp_write_reg(ssp, SSCR1, sscr1); |
| pxa_ssp_write_reg(ssp, SSSR, sssr); |
| pxa_ssp_write_reg(ssp, SSTO, 0); |
| pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* SSCR0_SSE written last */ |
| |
| /* Wait until SSP port is ready for slave clock operations */ |
| for (timeout = 100; timeout != 0; --timeout) { |
| if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS)) |
| break; |
| msleep(1); |
| } |
| |
| if (timeout == 0) |
| dev_err(navpoint->dev, |
| "timeout waiting for SSSR[CSS] to clear\n"); |
| |
| gpiod_set_value(navpoint->gpiod, 1); |
| } |
| |
| static void navpoint_down(struct navpoint *navpoint) |
| { |
| struct ssp_device *ssp = navpoint->ssp; |
| |
| gpiod_set_value(navpoint->gpiod, 0); |
| |
| pxa_ssp_write_reg(ssp, SSCR0, 0); |
| |
| clk_disable_unprepare(ssp->clk); |
| } |
| |
| static int navpoint_open(struct input_dev *input) |
| { |
| struct navpoint *navpoint = input_get_drvdata(input); |
| |
| navpoint_up(navpoint); |
| |
| return 0; |
| } |
| |
| static void navpoint_close(struct input_dev *input) |
| { |
| struct navpoint *navpoint = input_get_drvdata(input); |
| |
| navpoint_down(navpoint); |
| } |
| |
| static int navpoint_probe(struct platform_device *pdev) |
| { |
| const struct navpoint_platform_data *pdata = |
| dev_get_platdata(&pdev->dev); |
| struct ssp_device *ssp; |
| struct input_dev *input; |
| struct navpoint *navpoint; |
| int error; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "no platform data\n"); |
| return -EINVAL; |
| } |
| |
| ssp = pxa_ssp_request(pdata->port, pdev->name); |
| if (!ssp) |
| return -ENODEV; |
| |
| /* HaRET does not disable devices before jumping into Linux */ |
| if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { |
| pxa_ssp_write_reg(ssp, SSCR0, 0); |
| dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port); |
| } |
| |
| navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL); |
| input = input_allocate_device(); |
| if (!navpoint || !input) { |
| error = -ENOMEM; |
| goto err_free_mem; |
| } |
| |
| navpoint->gpiod = gpiod_get_optional(&pdev->dev, |
| NULL, GPIOD_OUT_LOW); |
| if (IS_ERR(navpoint->gpiod)) { |
| error = PTR_ERR(navpoint->gpiod); |
| dev_err(&pdev->dev, "error getting GPIO\n"); |
| goto err_free_mem; |
| } |
| gpiod_set_consumer_name(navpoint->gpiod, "SYNAPTICS_ON"); |
| |
| navpoint->ssp = ssp; |
| navpoint->input = input; |
| navpoint->dev = &pdev->dev; |
| |
| input->name = pdev->name; |
| input->dev.parent = &pdev->dev; |
| |
| __set_bit(EV_KEY, input->evbit); |
| __set_bit(EV_ABS, input->evbit); |
| __set_bit(BTN_LEFT, input->keybit); |
| __set_bit(BTN_TOUCH, input->keybit); |
| __set_bit(BTN_TOOL_FINGER, input->keybit); |
| |
| input_set_abs_params(input, ABS_X, |
| NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0); |
| input_set_abs_params(input, ABS_Y, |
| NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0); |
| input_set_abs_params(input, ABS_PRESSURE, |
| NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX, |
| 0, 0); |
| |
| input->open = navpoint_open; |
| input->close = navpoint_close; |
| |
| input_set_drvdata(input, navpoint); |
| |
| error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint); |
| if (error) |
| goto err_free_mem; |
| |
| error = input_register_device(input); |
| if (error) |
| goto err_free_irq; |
| |
| platform_set_drvdata(pdev, navpoint); |
| dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq); |
| |
| return 0; |
| |
| err_free_irq: |
| free_irq(ssp->irq, navpoint); |
| err_free_mem: |
| input_free_device(input); |
| kfree(navpoint); |
| pxa_ssp_free(ssp); |
| |
| return error; |
| } |
| |
| static void navpoint_remove(struct platform_device *pdev) |
| { |
| struct navpoint *navpoint = platform_get_drvdata(pdev); |
| struct ssp_device *ssp = navpoint->ssp; |
| |
| free_irq(ssp->irq, navpoint); |
| |
| input_unregister_device(navpoint->input); |
| kfree(navpoint); |
| |
| pxa_ssp_free(ssp); |
| } |
| |
| static int navpoint_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct navpoint *navpoint = platform_get_drvdata(pdev); |
| struct input_dev *input = navpoint->input; |
| |
| mutex_lock(&input->mutex); |
| if (input_device_enabled(input)) |
| navpoint_down(navpoint); |
| mutex_unlock(&input->mutex); |
| |
| return 0; |
| } |
| |
| static int navpoint_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct navpoint *navpoint = platform_get_drvdata(pdev); |
| struct input_dev *input = navpoint->input; |
| |
| mutex_lock(&input->mutex); |
| if (input_device_enabled(input)) |
| navpoint_up(navpoint); |
| mutex_unlock(&input->mutex); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(navpoint_pm_ops, |
| navpoint_suspend, navpoint_resume); |
| |
| static struct platform_driver navpoint_driver = { |
| .probe = navpoint_probe, |
| .remove_new = navpoint_remove, |
| .driver = { |
| .name = "navpoint", |
| .pm = pm_sleep_ptr(&navpoint_pm_ops), |
| }, |
| }; |
| |
| module_platform_driver(navpoint_driver); |
| |
| MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>"); |
| MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:navpoint"); |