| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver |
| * |
| * Copyright (C) 2012, Samsung Electronics Co., Ltd. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| |
| #include "dw_mmc.h" |
| #include "dw_mmc-pltfm.h" |
| #include "dw_mmc-exynos.h" |
| |
| /* Variations in Exynos specific dw-mshc controller */ |
| enum dw_mci_exynos_type { |
| DW_MCI_TYPE_EXYNOS4210, |
| DW_MCI_TYPE_EXYNOS4412, |
| DW_MCI_TYPE_EXYNOS5250, |
| DW_MCI_TYPE_EXYNOS5420, |
| DW_MCI_TYPE_EXYNOS5420_SMU, |
| DW_MCI_TYPE_EXYNOS7, |
| DW_MCI_TYPE_EXYNOS7_SMU, |
| DW_MCI_TYPE_ARTPEC8, |
| }; |
| |
| /* Exynos implementation specific driver private data */ |
| struct dw_mci_exynos_priv_data { |
| enum dw_mci_exynos_type ctrl_type; |
| u8 ciu_div; |
| u32 sdr_timing; |
| u32 ddr_timing; |
| u32 hs400_timing; |
| u32 tuned_sample; |
| u32 cur_speed; |
| u32 dqs_delay; |
| u32 saved_dqs_en; |
| u32 saved_strobe_ctrl; |
| }; |
| |
| static struct dw_mci_exynos_compatible { |
| char *compatible; |
| enum dw_mci_exynos_type ctrl_type; |
| } exynos_compat[] = { |
| { |
| .compatible = "samsung,exynos4210-dw-mshc", |
| .ctrl_type = DW_MCI_TYPE_EXYNOS4210, |
| }, { |
| .compatible = "samsung,exynos4412-dw-mshc", |
| .ctrl_type = DW_MCI_TYPE_EXYNOS4412, |
| }, { |
| .compatible = "samsung,exynos5250-dw-mshc", |
| .ctrl_type = DW_MCI_TYPE_EXYNOS5250, |
| }, { |
| .compatible = "samsung,exynos5420-dw-mshc", |
| .ctrl_type = DW_MCI_TYPE_EXYNOS5420, |
| }, { |
| .compatible = "samsung,exynos5420-dw-mshc-smu", |
| .ctrl_type = DW_MCI_TYPE_EXYNOS5420_SMU, |
| }, { |
| .compatible = "samsung,exynos7-dw-mshc", |
| .ctrl_type = DW_MCI_TYPE_EXYNOS7, |
| }, { |
| .compatible = "samsung,exynos7-dw-mshc-smu", |
| .ctrl_type = DW_MCI_TYPE_EXYNOS7_SMU, |
| }, { |
| .compatible = "axis,artpec8-dw-mshc", |
| .ctrl_type = DW_MCI_TYPE_ARTPEC8, |
| }, |
| }; |
| |
| static inline u8 dw_mci_exynos_get_ciu_div(struct dw_mci *host) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412) |
| return EXYNOS4412_FIXED_CIU_CLK_DIV; |
| else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210) |
| return EXYNOS4210_FIXED_CIU_CLK_DIV; |
| else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL64)) + 1; |
| else |
| return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL)) + 1; |
| } |
| |
| static void dw_mci_exynos_config_smu(struct dw_mci *host) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| |
| /* |
| * If Exynos is provided the Security management, |
| * set for non-ecryption mode at this time. |
| */ |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) { |
| mci_writel(host, MPSBEGIN0, 0); |
| mci_writel(host, MPSEND0, SDMMC_ENDING_SEC_NR_MAX); |
| mci_writel(host, MPSCTRL0, SDMMC_MPSCTRL_SECURE_WRITE_BIT | |
| SDMMC_MPSCTRL_NON_SECURE_READ_BIT | |
| SDMMC_MPSCTRL_VALID | |
| SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT); |
| } |
| } |
| |
| static int dw_mci_exynos_priv_init(struct dw_mci *host) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| |
| dw_mci_exynos_config_smu(host); |
| |
| if (priv->ctrl_type >= DW_MCI_TYPE_EXYNOS5420) { |
| priv->saved_strobe_ctrl = mci_readl(host, HS400_DLINE_CTRL); |
| priv->saved_dqs_en = mci_readl(host, HS400_DQS_EN); |
| priv->saved_dqs_en |= AXI_NON_BLOCKING_WR; |
| mci_writel(host, HS400_DQS_EN, priv->saved_dqs_en); |
| if (!priv->dqs_delay) |
| priv->dqs_delay = |
| DQS_CTRL_GET_RD_DELAY(priv->saved_strobe_ctrl); |
| } |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) { |
| /* Quirk needed for the ARTPEC-8 SoC */ |
| host->quirks |= DW_MMC_QUIRK_EXTENDED_TMOUT; |
| } |
| |
| host->bus_hz /= (priv->ciu_div + 1); |
| |
| return 0; |
| } |
| |
| static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| u32 clksel; |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| clksel = mci_readl(host, CLKSEL64); |
| else |
| clksel = mci_readl(host, CLKSEL); |
| |
| clksel = (clksel & ~SDMMC_CLKSEL_TIMING_MASK) | timing; |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| mci_writel(host, CLKSEL64, clksel); |
| else |
| mci_writel(host, CLKSEL, clksel); |
| |
| /* |
| * Exynos4412 and Exynos5250 extends the use of CMD register with the |
| * use of bit 29 (which is reserved on standard MSHC controllers) for |
| * optionally bypassing the HOLD register for command and data. The |
| * HOLD register should be bypassed in case there is no phase shift |
| * applied on CMD/DATA that is sent to the card. |
| */ |
| if (!SDMMC_CLKSEL_GET_DRV_WD3(clksel) && host->slot) |
| set_bit(DW_MMC_CARD_NO_USE_HOLD, &host->slot->flags); |
| } |
| |
| #ifdef CONFIG_PM |
| static int dw_mci_exynos_runtime_resume(struct device *dev) |
| { |
| struct dw_mci *host = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = dw_mci_runtime_resume(dev); |
| if (ret) |
| return ret; |
| |
| dw_mci_exynos_config_smu(host); |
| |
| return ret; |
| } |
| #endif /* CONFIG_PM */ |
| |
| #ifdef CONFIG_PM_SLEEP |
| /** |
| * dw_mci_exynos_suspend_noirq - Exynos-specific suspend code |
| * @dev: Device to suspend (this device) |
| * |
| * This ensures that device will be in runtime active state in |
| * dw_mci_exynos_resume_noirq after calling pm_runtime_force_resume() |
| */ |
| static int dw_mci_exynos_suspend_noirq(struct device *dev) |
| { |
| pm_runtime_get_noresume(dev); |
| return pm_runtime_force_suspend(dev); |
| } |
| |
| /** |
| * dw_mci_exynos_resume_noirq - Exynos-specific resume code |
| * @dev: Device to resume (this device) |
| * |
| * On exynos5420 there is a silicon errata that will sometimes leave the |
| * WAKEUP_INT bit in the CLKSEL register asserted. This bit is 1 to indicate |
| * that it fired and we can clear it by writing a 1 back. Clear it to prevent |
| * interrupts from going off constantly. |
| * |
| * We run this code on all exynos variants because it doesn't hurt. |
| */ |
| static int dw_mci_exynos_resume_noirq(struct device *dev) |
| { |
| struct dw_mci *host = dev_get_drvdata(dev); |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| u32 clksel; |
| int ret; |
| |
| ret = pm_runtime_force_resume(dev); |
| if (ret) |
| return ret; |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| clksel = mci_readl(host, CLKSEL64); |
| else |
| clksel = mci_readl(host, CLKSEL); |
| |
| if (clksel & SDMMC_CLKSEL_WAKEUP_INT) { |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| mci_writel(host, CLKSEL64, clksel); |
| else |
| mci_writel(host, CLKSEL, clksel); |
| } |
| |
| pm_runtime_put(dev); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| u32 dqs, strobe; |
| |
| /* |
| * Not supported to configure register |
| * related to HS400 |
| */ |
| if ((priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420) || |
| (priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)) { |
| if (timing == MMC_TIMING_MMC_HS400) |
| dev_warn(host->dev, |
| "cannot configure HS400, unsupported chipset\n"); |
| return; |
| } |
| |
| dqs = priv->saved_dqs_en; |
| strobe = priv->saved_strobe_ctrl; |
| |
| if (timing == MMC_TIMING_MMC_HS400) { |
| dqs |= DATA_STROBE_EN; |
| strobe = DQS_CTRL_RD_DELAY(strobe, priv->dqs_delay); |
| } else if (timing == MMC_TIMING_UHS_SDR104) { |
| dqs &= 0xffffff00; |
| } else { |
| dqs &= ~DATA_STROBE_EN; |
| } |
| |
| mci_writel(host, HS400_DQS_EN, dqs); |
| mci_writel(host, HS400_DLINE_CTRL, strobe); |
| } |
| |
| static void dw_mci_exynos_adjust_clock(struct dw_mci *host, unsigned int wanted) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| unsigned long actual; |
| u8 div; |
| int ret; |
| /* |
| * Don't care if wanted clock is zero or |
| * ciu clock is unavailable |
| */ |
| if (!wanted || IS_ERR(host->ciu_clk)) |
| return; |
| |
| /* Guaranteed minimum frequency for cclkin */ |
| if (wanted < EXYNOS_CCLKIN_MIN) |
| wanted = EXYNOS_CCLKIN_MIN; |
| |
| if (wanted == priv->cur_speed) |
| return; |
| |
| div = dw_mci_exynos_get_ciu_div(host); |
| ret = clk_set_rate(host->ciu_clk, wanted * div); |
| if (ret) |
| dev_warn(host->dev, |
| "failed to set clk-rate %u error: %d\n", |
| wanted * div, ret); |
| actual = clk_get_rate(host->ciu_clk); |
| host->bus_hz = actual / div; |
| priv->cur_speed = wanted; |
| host->current_speed = 0; |
| } |
| |
| static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| unsigned int wanted = ios->clock; |
| u32 timing = ios->timing, clksel; |
| |
| switch (timing) { |
| case MMC_TIMING_MMC_HS400: |
| /* Update tuned sample timing */ |
| clksel = SDMMC_CLKSEL_UP_SAMPLE( |
| priv->hs400_timing, priv->tuned_sample); |
| wanted <<= 1; |
| break; |
| case MMC_TIMING_MMC_DDR52: |
| clksel = priv->ddr_timing; |
| /* Should be double rate for DDR mode */ |
| if (ios->bus_width == MMC_BUS_WIDTH_8) |
| wanted <<= 1; |
| break; |
| case MMC_TIMING_UHS_SDR104: |
| case MMC_TIMING_UHS_SDR50: |
| clksel = (priv->sdr_timing & 0xfff8ffff) | |
| (priv->ciu_div << 16); |
| break; |
| case MMC_TIMING_UHS_DDR50: |
| clksel = (priv->ddr_timing & 0xfff8ffff) | |
| (priv->ciu_div << 16); |
| break; |
| default: |
| clksel = priv->sdr_timing; |
| } |
| |
| /* Set clock timing for the requested speed mode*/ |
| dw_mci_exynos_set_clksel_timing(host, clksel); |
| |
| /* Configure setting for HS400 */ |
| dw_mci_exynos_config_hs400(host, timing); |
| |
| /* Configure clock rate */ |
| dw_mci_exynos_adjust_clock(host, wanted); |
| } |
| |
| static int dw_mci_exynos_parse_dt(struct dw_mci *host) |
| { |
| struct dw_mci_exynos_priv_data *priv; |
| struct device_node *np = host->dev->of_node; |
| u32 timing[2]; |
| u32 div = 0; |
| int idx; |
| int ret; |
| |
| priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) { |
| if (of_device_is_compatible(np, exynos_compat[idx].compatible)) |
| priv->ctrl_type = exynos_compat[idx].ctrl_type; |
| } |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412) |
| priv->ciu_div = EXYNOS4412_FIXED_CIU_CLK_DIV - 1; |
| else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210) |
| priv->ciu_div = EXYNOS4210_FIXED_CIU_CLK_DIV - 1; |
| else { |
| of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div); |
| priv->ciu_div = div; |
| } |
| |
| ret = of_property_read_u32_array(np, |
| "samsung,dw-mshc-sdr-timing", timing, 2); |
| if (ret) |
| return ret; |
| |
| priv->sdr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div); |
| |
| ret = of_property_read_u32_array(np, |
| "samsung,dw-mshc-ddr-timing", timing, 2); |
| if (ret) |
| return ret; |
| |
| priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div); |
| |
| ret = of_property_read_u32_array(np, |
| "samsung,dw-mshc-hs400-timing", timing, 2); |
| if (!ret && of_property_read_u32(np, |
| "samsung,read-strobe-delay", &priv->dqs_delay)) |
| dev_dbg(host->dev, |
| "read-strobe-delay is not found, assuming usage of default value\n"); |
| |
| priv->hs400_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], |
| HS400_FIXED_CIU_CLK_DIV); |
| host->priv = priv; |
| return 0; |
| } |
| |
| static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL64)); |
| else |
| return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL)); |
| } |
| |
| static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample) |
| { |
| u32 clksel; |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| clksel = mci_readl(host, CLKSEL64); |
| else |
| clksel = mci_readl(host, CLKSEL); |
| clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample); |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| mci_writel(host, CLKSEL64, clksel); |
| else |
| mci_writel(host, CLKSEL, clksel); |
| } |
| |
| static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| u32 clksel; |
| u8 sample; |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| clksel = mci_readl(host, CLKSEL64); |
| else |
| clksel = mci_readl(host, CLKSEL); |
| |
| sample = (clksel + 1) & 0x7; |
| clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample); |
| |
| if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || |
| priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || |
| priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) |
| mci_writel(host, CLKSEL64, clksel); |
| else |
| mci_writel(host, CLKSEL, clksel); |
| |
| return sample; |
| } |
| |
| static s8 dw_mci_exynos_get_best_clksmpl(u8 candidates) |
| { |
| const u8 iter = 8; |
| u8 __c; |
| s8 i, loc = -1; |
| |
| for (i = 0; i < iter; i++) { |
| __c = ror8(candidates, i); |
| if ((__c & 0xc7) == 0xc7) { |
| loc = i; |
| goto out; |
| } |
| } |
| |
| for (i = 0; i < iter; i++) { |
| __c = ror8(candidates, i); |
| if ((__c & 0x83) == 0x83) { |
| loc = i; |
| goto out; |
| } |
| } |
| |
| /* |
| * If there is no cadiates value, then it needs to return -EIO. |
| * If there are candidates values and don't find bset clk sample value, |
| * then use a first candidates clock sample value. |
| */ |
| for (i = 0; i < iter; i++) { |
| __c = ror8(candidates, i); |
| if ((__c & 0x1) == 0x1) { |
| loc = i; |
| goto out; |
| } |
| } |
| out: |
| return loc; |
| } |
| |
| static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode) |
| { |
| struct dw_mci *host = slot->host; |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| struct mmc_host *mmc = slot->mmc; |
| u8 start_smpl, smpl, candidates = 0; |
| s8 found; |
| int ret = 0; |
| |
| start_smpl = dw_mci_exynos_get_clksmpl(host); |
| |
| do { |
| mci_writel(host, TMOUT, ~0); |
| smpl = dw_mci_exynos_move_next_clksmpl(host); |
| |
| if (!mmc_send_tuning(mmc, opcode, NULL)) |
| candidates |= (1 << smpl); |
| |
| } while (start_smpl != smpl); |
| |
| found = dw_mci_exynos_get_best_clksmpl(candidates); |
| if (found >= 0) { |
| dw_mci_exynos_set_clksmpl(host, found); |
| priv->tuned_sample = found; |
| } else { |
| ret = -EIO; |
| dev_warn(&mmc->class_dev, |
| "There is no candidates value about clksmpl!\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int dw_mci_exynos_prepare_hs400_tuning(struct dw_mci *host, |
| struct mmc_ios *ios) |
| { |
| struct dw_mci_exynos_priv_data *priv = host->priv; |
| |
| dw_mci_exynos_set_clksel_timing(host, priv->hs400_timing); |
| dw_mci_exynos_adjust_clock(host, (ios->clock) << 1); |
| |
| return 0; |
| } |
| |
| static void dw_mci_exynos_set_data_timeout(struct dw_mci *host, |
| unsigned int timeout_ns) |
| { |
| u32 clk_div, tmout; |
| u64 tmp; |
| unsigned int tmp2; |
| |
| clk_div = (mci_readl(host, CLKDIV) & 0xFF) * 2; |
| if (clk_div == 0) |
| clk_div = 1; |
| |
| tmp = DIV_ROUND_UP_ULL((u64)timeout_ns * host->bus_hz, NSEC_PER_SEC); |
| tmp = DIV_ROUND_UP_ULL(tmp, clk_div); |
| |
| /* TMOUT[7:0] (RESPONSE_TIMEOUT) */ |
| tmout = 0xFF; /* Set maximum */ |
| |
| /* |
| * Extended HW timer (max = 0x6FFFFF2): |
| * ((TMOUT[10:8] - 1) * 0xFFFFFF + TMOUT[31:11] * 8) |
| */ |
| if (!tmp || tmp > 0x6FFFFF2) |
| tmout |= (0xFFFFFF << 8); |
| else { |
| /* TMOUT[10:8] */ |
| tmp2 = (((unsigned int)tmp / 0xFFFFFF) + 1) & 0x7; |
| tmout |= tmp2 << 8; |
| |
| /* TMOUT[31:11] */ |
| tmp = tmp - ((tmp2 - 1) * 0xFFFFFF); |
| tmout |= (tmp & 0xFFFFF8) << 8; |
| } |
| |
| mci_writel(host, TMOUT, tmout); |
| dev_dbg(host->dev, "timeout_ns: %u => TMOUT[31:8]: %#08x", |
| timeout_ns, tmout >> 8); |
| } |
| |
| static u32 dw_mci_exynos_get_drto_clks(struct dw_mci *host) |
| { |
| u32 drto_clks; |
| |
| drto_clks = mci_readl(host, TMOUT) >> 8; |
| |
| return (((drto_clks & 0x7) - 1) * 0xFFFFFF) + ((drto_clks & 0xFFFFF8)); |
| } |
| |
| /* Common capabilities of Exynos4/Exynos5 SoC */ |
| static unsigned long exynos_dwmmc_caps[4] = { |
| MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA, |
| 0, |
| 0, |
| 0, |
| }; |
| |
| static const struct dw_mci_drv_data exynos_drv_data = { |
| .caps = exynos_dwmmc_caps, |
| .num_caps = ARRAY_SIZE(exynos_dwmmc_caps), |
| .common_caps = MMC_CAP_CMD23, |
| .init = dw_mci_exynos_priv_init, |
| .set_ios = dw_mci_exynos_set_ios, |
| .parse_dt = dw_mci_exynos_parse_dt, |
| .execute_tuning = dw_mci_exynos_execute_tuning, |
| .prepare_hs400_tuning = dw_mci_exynos_prepare_hs400_tuning, |
| }; |
| |
| static const struct dw_mci_drv_data artpec_drv_data = { |
| .common_caps = MMC_CAP_CMD23, |
| .init = dw_mci_exynos_priv_init, |
| .set_ios = dw_mci_exynos_set_ios, |
| .parse_dt = dw_mci_exynos_parse_dt, |
| .execute_tuning = dw_mci_exynos_execute_tuning, |
| .set_data_timeout = dw_mci_exynos_set_data_timeout, |
| .get_drto_clks = dw_mci_exynos_get_drto_clks, |
| }; |
| |
| static const struct of_device_id dw_mci_exynos_match[] = { |
| { .compatible = "samsung,exynos4412-dw-mshc", |
| .data = &exynos_drv_data, }, |
| { .compatible = "samsung,exynos5250-dw-mshc", |
| .data = &exynos_drv_data, }, |
| { .compatible = "samsung,exynos5420-dw-mshc", |
| .data = &exynos_drv_data, }, |
| { .compatible = "samsung,exynos5420-dw-mshc-smu", |
| .data = &exynos_drv_data, }, |
| { .compatible = "samsung,exynos7-dw-mshc", |
| .data = &exynos_drv_data, }, |
| { .compatible = "samsung,exynos7-dw-mshc-smu", |
| .data = &exynos_drv_data, }, |
| { .compatible = "axis,artpec8-dw-mshc", |
| .data = &artpec_drv_data, }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, dw_mci_exynos_match); |
| |
| static int dw_mci_exynos_probe(struct platform_device *pdev) |
| { |
| const struct dw_mci_drv_data *drv_data; |
| const struct of_device_id *match; |
| int ret; |
| |
| match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node); |
| drv_data = match->data; |
| |
| pm_runtime_get_noresume(&pdev->dev); |
| pm_runtime_set_active(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| |
| ret = dw_mci_pltfm_register(pdev, drv_data); |
| if (ret) { |
| pm_runtime_disable(&pdev->dev); |
| pm_runtime_set_suspended(&pdev->dev); |
| pm_runtime_put_noidle(&pdev->dev); |
| |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void dw_mci_exynos_remove(struct platform_device *pdev) |
| { |
| pm_runtime_disable(&pdev->dev); |
| pm_runtime_set_suspended(&pdev->dev); |
| pm_runtime_put_noidle(&pdev->dev); |
| |
| dw_mci_pltfm_remove(pdev); |
| } |
| |
| static const struct dev_pm_ops dw_mci_exynos_pmops = { |
| SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(dw_mci_exynos_suspend_noirq, |
| dw_mci_exynos_resume_noirq) |
| SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend, |
| dw_mci_exynos_runtime_resume, |
| NULL) |
| }; |
| |
| static struct platform_driver dw_mci_exynos_pltfm_driver = { |
| .probe = dw_mci_exynos_probe, |
| .remove_new = dw_mci_exynos_remove, |
| .driver = { |
| .name = "dwmmc_exynos", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = dw_mci_exynos_match, |
| .pm = &dw_mci_exynos_pmops, |
| }, |
| }; |
| |
| module_platform_driver(dw_mci_exynos_pltfm_driver); |
| |
| MODULE_DESCRIPTION("Samsung Specific DW-MSHC Driver Extension"); |
| MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:dwmmc_exynos"); |