| /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
| /* |
| * Regulator uapi header |
| * |
| * Author: Naresh Solanki <Naresh.Solanki@9elements.com> |
| */ |
| |
| #ifndef _UAPI_REGULATOR_H |
| #define _UAPI_REGULATOR_H |
| |
| #ifdef __KERNEL__ |
| #include <linux/types.h> |
| #else |
| #include <stdint.h> |
| #endif |
| |
| /* |
| * Regulator notifier events. |
| * |
| * UNDER_VOLTAGE Regulator output is under voltage. |
| * OVER_CURRENT Regulator output current is too high. |
| * REGULATION_OUT Regulator output is out of regulation. |
| * FAIL Regulator output has failed. |
| * OVER_TEMP Regulator over temp. |
| * FORCE_DISABLE Regulator forcibly shut down by software. |
| * VOLTAGE_CHANGE Regulator voltage changed. |
| * Data passed is old voltage cast to (void *). |
| * DISABLE Regulator was disabled. |
| * PRE_VOLTAGE_CHANGE Regulator is about to have voltage changed. |
| * Data passed is "struct pre_voltage_change_data" |
| * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason. |
| * Data passed is old voltage cast to (void *). |
| * PRE_DISABLE Regulator is about to be disabled |
| * ABORT_DISABLE Regulator disable failed for some reason |
| * |
| * NOTE: These events can be OR'ed together when passed into handler. |
| */ |
| |
| #define REGULATOR_EVENT_UNDER_VOLTAGE 0x01 |
| #define REGULATOR_EVENT_OVER_CURRENT 0x02 |
| #define REGULATOR_EVENT_REGULATION_OUT 0x04 |
| #define REGULATOR_EVENT_FAIL 0x08 |
| #define REGULATOR_EVENT_OVER_TEMP 0x10 |
| #define REGULATOR_EVENT_FORCE_DISABLE 0x20 |
| #define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40 |
| #define REGULATOR_EVENT_DISABLE 0x80 |
| #define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100 |
| #define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200 |
| #define REGULATOR_EVENT_PRE_DISABLE 0x400 |
| #define REGULATOR_EVENT_ABORT_DISABLE 0x800 |
| #define REGULATOR_EVENT_ENABLE 0x1000 |
| /* |
| * Following notifications should be emitted only if detected condition |
| * is such that the HW is likely to still be working but consumers should |
| * take a recovery action to prevent problems escalating into errors. |
| */ |
| #define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000 |
| #define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000 |
| #define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000 |
| #define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000 |
| #define REGULATOR_EVENT_WARN_MASK 0x1E000 |
| |
| struct reg_genl_event { |
| char reg_name[32]; |
| uint64_t event; |
| }; |
| |
| /* attributes of reg_genl_family */ |
| enum { |
| REG_GENL_ATTR_UNSPEC, |
| REG_GENL_ATTR_EVENT, /* reg event info needed by user space */ |
| __REG_GENL_ATTR_MAX, |
| }; |
| |
| #define REG_GENL_ATTR_MAX (__REG_GENL_ATTR_MAX - 1) |
| |
| /* commands supported by the reg_genl_family */ |
| enum { |
| REG_GENL_CMD_UNSPEC, |
| REG_GENL_CMD_EVENT, /* kernel->user notifications for reg events */ |
| __REG_GENL_CMD_MAX, |
| }; |
| |
| #define REG_GENL_CMD_MAX (__REG_GENL_CMD_MAX - 1) |
| |
| #define REG_GENL_FAMILY_NAME "reg_event" |
| #define REG_GENL_VERSION 0x01 |
| #define REG_GENL_MCAST_GROUP_NAME "reg_mc_group" |
| |
| #endif /* _UAPI_REGULATOR_H */ |