| /* Driver for Realtek PCI-Express card reader |
| * |
| * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * Author: |
| * Wei WANG <wei_wang@realsil.com.cn> |
| * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China |
| * |
| * Roger Tseng <rogerable@realtek.com> |
| * No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/mfd/rtsx_pci.h> |
| |
| #include "rtsx_pcr.h" |
| |
| static void rts5227_fill_driving(struct rtsx_pcr *pcr, u8 voltage) |
| { |
| u8 driving_3v3[4][3] = { |
| {0x13, 0x13, 0x13}, |
| {0x96, 0x96, 0x96}, |
| {0x7F, 0x7F, 0x7F}, |
| {0x96, 0x96, 0x96}, |
| }; |
| u8 driving_1v8[4][3] = { |
| {0x99, 0x99, 0x99}, |
| {0xAA, 0xAA, 0xAA}, |
| {0xFE, 0xFE, 0xFE}, |
| {0xB3, 0xB3, 0xB3}, |
| }; |
| u8 (*driving)[3], drive_sel; |
| |
| if (voltage == OUTPUT_3V3) { |
| driving = driving_3v3; |
| drive_sel = pcr->sd30_drive_sel_3v3; |
| } else { |
| driving = driving_1v8; |
| drive_sel = pcr->sd30_drive_sel_1v8; |
| } |
| |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL, |
| 0xFF, driving[drive_sel][0]); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL, |
| 0xFF, driving[drive_sel][1]); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL, |
| 0xFF, driving[drive_sel][2]); |
| } |
| |
| static void rts5227_fetch_vendor_settings(struct rtsx_pcr *pcr) |
| { |
| u32 reg; |
| |
| rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®); |
| dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg); |
| |
| if (!rtsx_vendor_setting_valid(reg)) |
| return; |
| |
| pcr->aspm_en = rtsx_reg_to_aspm(reg); |
| pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg); |
| pcr->card_drive_sel &= 0x3F; |
| pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg); |
| |
| rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, ®); |
| dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg); |
| pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg); |
| if (rtsx_reg_check_reverse_socket(reg)) |
| pcr->flags |= PCR_REVERSE_SOCKET; |
| } |
| |
| static int rts5227_extra_init_hw(struct rtsx_pcr *pcr) |
| { |
| u16 cap; |
| |
| rtsx_pci_init_cmd(pcr); |
| |
| /* Configure GPIO as output */ |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02); |
| /* Switch LDO3318 source from DV33 to card_3v3 */ |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01); |
| /* LED shine disabled, set initial shine cycle period */ |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02); |
| /* Configure LTR */ |
| pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &cap); |
| if (cap & PCI_EXP_LTR_EN) |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LTR_CTL, 0xFF, 0xA3); |
| /* Configure OBFF */ |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OBFF_CFG, 0x03, 0x03); |
| /* Configure driving */ |
| rts5227_fill_driving(pcr, OUTPUT_3V3); |
| /* Configure force_clock_req */ |
| if (pcr->flags & PCR_REVERSE_SOCKET) |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, |
| AUTOLOAD_CFG_BASE + 3, 0xB8, 0xB8); |
| else |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, |
| AUTOLOAD_CFG_BASE + 3, 0xB8, 0x88); |
| |
| return rtsx_pci_send_cmd(pcr, 100); |
| } |
| |
| static int rts5227_optimize_phy(struct rtsx_pcr *pcr) |
| { |
| /* Optimize RX sensitivity */ |
| return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42); |
| } |
| |
| static int rts5227_turn_on_led(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02); |
| } |
| |
| static int rts5227_turn_off_led(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00); |
| } |
| |
| static int rts5227_enable_auto_blink(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08); |
| } |
| |
| static int rts5227_disable_auto_blink(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00); |
| } |
| |
| static int rts5227_card_power_on(struct rtsx_pcr *pcr, int card) |
| { |
| int err; |
| |
| rtsx_pci_init_cmd(pcr); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, |
| SD_POWER_MASK, SD_PARTIAL_POWER_ON); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, |
| LDO3318_PWR_MASK, 0x02); |
| err = rtsx_pci_send_cmd(pcr, 100); |
| if (err < 0) |
| return err; |
| |
| /* To avoid too large in-rush current */ |
| udelay(150); |
| |
| rtsx_pci_init_cmd(pcr); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, |
| SD_POWER_MASK, SD_POWER_ON); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, |
| LDO3318_PWR_MASK, 0x06); |
| err = rtsx_pci_send_cmd(pcr, 100); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card) |
| { |
| rtsx_pci_init_cmd(pcr); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, |
| SD_POWER_MASK | PMOS_STRG_MASK, |
| SD_POWER_OFF | PMOS_STRG_400mA); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, |
| LDO3318_PWR_MASK, 0X00); |
| return rtsx_pci_send_cmd(pcr, 100); |
| } |
| |
| static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) |
| { |
| int err; |
| |
| if (voltage == OUTPUT_3V3) { |
| err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24); |
| if (err < 0) |
| return err; |
| } else if (voltage == OUTPUT_1V8) { |
| err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02); |
| if (err < 0) |
| return err; |
| err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C80 | 0x24); |
| if (err < 0) |
| return err; |
| } else { |
| return -EINVAL; |
| } |
| |
| /* set pad drive */ |
| rtsx_pci_init_cmd(pcr); |
| rts5227_fill_driving(pcr, voltage); |
| return rtsx_pci_send_cmd(pcr, 100); |
| } |
| |
| static const struct pcr_ops rts5227_pcr_ops = { |
| .fetch_vendor_settings = rts5227_fetch_vendor_settings, |
| .extra_init_hw = rts5227_extra_init_hw, |
| .optimize_phy = rts5227_optimize_phy, |
| .turn_on_led = rts5227_turn_on_led, |
| .turn_off_led = rts5227_turn_off_led, |
| .enable_auto_blink = rts5227_enable_auto_blink, |
| .disable_auto_blink = rts5227_disable_auto_blink, |
| .card_power_on = rts5227_card_power_on, |
| .card_power_off = rts5227_card_power_off, |
| .switch_output_voltage = rts5227_switch_output_voltage, |
| .cd_deglitch = NULL, |
| .conv_clk_and_div_n = NULL, |
| }; |
| |
| /* SD Pull Control Enable: |
| * SD_DAT[3:0] ==> pull up |
| * SD_CD ==> pull up |
| * SD_WP ==> pull up |
| * SD_CMD ==> pull up |
| * SD_CLK ==> pull down |
| */ |
| static const u32 rts5227_sd_pull_ctl_enable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA), |
| RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9), |
| 0, |
| }; |
| |
| /* SD Pull Control Disable: |
| * SD_DAT[3:0] ==> pull down |
| * SD_CD ==> pull up |
| * SD_WP ==> pull down |
| * SD_CMD ==> pull down |
| * SD_CLK ==> pull down |
| */ |
| static const u32 rts5227_sd_pull_ctl_disable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55), |
| RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5), |
| 0, |
| }; |
| |
| /* MS Pull Control Enable: |
| * MS CD ==> pull up |
| * others ==> pull down |
| */ |
| static const u32 rts5227_ms_pull_ctl_enable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55), |
| RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15), |
| 0, |
| }; |
| |
| /* MS Pull Control Disable: |
| * MS CD ==> pull up |
| * others ==> pull down |
| */ |
| static const u32 rts5227_ms_pull_ctl_disable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55), |
| RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15), |
| 0, |
| }; |
| |
| void rts5227_init_params(struct rtsx_pcr *pcr) |
| { |
| pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104; |
| pcr->num_slots = 2; |
| pcr->ops = &rts5227_pcr_ops; |
| |
| pcr->flags = 0; |
| pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT; |
| pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B; |
| pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B; |
| pcr->aspm_en = ASPM_L1_EN; |
| |
| pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl; |
| pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl; |
| pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl; |
| pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl; |
| } |