arch/x86/crypto/aes-gcm-aesni-x86_64.S

/* SPDX-License-Identifier: Apache-2.0 OR BSD-2-Clause */
//
// AES-NI optimized AES-GCM for x86_64
//
// Copyright 2024 Google LLC
//
// Author: Eric Biggers <ebiggers@google.com>
//
//------------------------------------------------------------------------------
//
// This file is dual-licensed, meaning that you can use it under your choice of
// either of the following two licenses:
//
// Licensed under the Apache License 2.0 (the "License").  You may obtain a copy
// of the License at
//
//	http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
// or
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
//    this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
//    notice, this list of conditions and the following disclaimer in the
//    documentation and/or other materials provided with the distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
//------------------------------------------------------------------------------
//
// This file implements AES-GCM (Galois/Counter Mode) for x86_64 CPUs that
// support the original set of AES instructions, i.e. AES-NI.  Two
// implementations are provided, one that uses AVX and one that doesn't.  They
// are very similar, being generated by the same macros.  The only difference is
// that the AVX implementation takes advantage of VEX-coded instructions in some
// places to avoid some 'movdqu' and 'movdqa' instructions.  The AVX
// implementation does *not* use 256-bit vectors, as AES is not supported on
// 256-bit vectors until the VAES feature (which this file doesn't target).
//
// The specific CPU feature prerequisites are AES-NI and PCLMULQDQ, plus SSE4.1
// for the *_aesni functions or AVX for the *_aesni_avx ones.  (But it seems
// there are no CPUs that support AES-NI without also PCLMULQDQ and SSE4.1.)
//
// The design generally follows that of aes-gcm-avx10-x86_64.S, and that file is
// more thoroughly commented.  This file has the following notable changes:
//
//    - The vector length is fixed at 128-bit, i.e. xmm registers.  This means
//      there is only one AES block (and GHASH block) per register.
//
//    - Without AVX512 / AVX10, only 16 SIMD registers are available instead of
//      32.  We work around this by being much more careful about using
//      registers, relying heavily on loads to load values as they are needed.
//
//    - Masking is not available either.  We work around this by implementing
//      partial block loads and stores using overlapping scalar loads and stores
//      combined with shifts and SSE4.1 insertion and extraction instructions.
//
//    - The main loop is organized differently due to the different design
//      constraints.  First, with just one AES block per SIMD register, on some
//      CPUs 4 registers don't saturate the 'aesenc' throughput.  We therefore
//      do an 8-register wide loop.  Considering that and the fact that we have
//      just 16 SIMD registers to work with, it's not feasible to cache AES
//      round keys and GHASH key powers in registers across loop iterations.
//      That's not ideal, but also not actually that bad, since loads can run in
//      parallel with other instructions.  Significantly, this also makes it
//      possible to roll up the inner loops, relying on hardware loop unrolling
//      instead of software loop unrolling, greatly reducing code size.
//
//    - We implement the GHASH multiplications in the main loop using Karatsuba
//      multiplication instead of schoolbook multiplication.  This saves one
//      pclmulqdq instruction per block, at the cost of one 64-bit load, one
//      pshufd, and 0.25 pxors per block.  (This is without the three-argument
//      XOR support that would be provided by AVX512 / AVX10, which would be
//      more beneficial to schoolbook than Karatsuba.)
//
//      As a rough approximation, we can assume that Karatsuba multiplication is
//      faster than schoolbook multiplication in this context if one pshufd and
//      0.25 pxors are cheaper than a pclmulqdq.  (We assume that the 64-bit
//      load is "free" due to running in parallel with arithmetic instructions.)
//      This is true on AMD CPUs, including all that support pclmulqdq up to at
//      least Zen 3.  It's also true on older Intel CPUs: Westmere through
//      Haswell on the Core side, and Silvermont through Goldmont Plus on the
//      low-power side.  On some of these CPUs, pclmulqdq is quite slow, and the
//      benefit of Karatsuba should be substantial.  On newer Intel CPUs,
//      schoolbook multiplication should be faster, but only marginally.
//
//      Not all these CPUs were available to be tested.  However, benchmarks on
//      available CPUs suggest that this approximation is plausible.  Switching
//      to Karatsuba showed negligible change (< 1%) on Intel Broadwell,
//      Skylake, and Cascade Lake, but it improved AMD Zen 1-3 by 6-7%.
//      Considering that and the fact that Karatsuba should be even more
//      beneficial on older Intel CPUs, it seems like the right choice here.
//
//      An additional 0.25 pclmulqdq per block (2 per 8 blocks) could be
//      saved by using a multiplication-less reduction method.  We don't do that
//      because it would require a large number of shift and xor instructions,
//      making it less worthwhile and likely harmful on newer CPUs.
//
//      It does make sense to sometimes use a different reduction optimization
//      that saves a pclmulqdq, though: precompute the hash key times x^64, and
//      multiply the low half of the data block by the hash key with the extra
//      factor of x^64.  This eliminates one step of the reduction.  However,
//      this is incompatible with Karatsuba multiplication.  Therefore, for
//      multi-block processing we use Karatsuba multiplication with a regular
//      reduction.  For single-block processing, we use the x^64 optimization.

#include <linux/linkage.h>

.section .rodata
.p2align 4
.Lbswap_mask:
	.octa   0x000102030405060708090a0b0c0d0e0f
.Lgfpoly:
	.quad	0xc200000000000000
.Lone:
	.quad	1
.Lgfpoly_and_internal_carrybit:
	.octa	0xc2000000000000010000000000000001
	// Loading 16 bytes from '.Lzeropad_mask + 16 - len' produces a mask of
	// 'len' 0xff bytes and the rest zeroes.
.Lzeropad_mask:
	.octa	0xffffffffffffffffffffffffffffffff
	.octa	0

// Offsets in struct aes_gcm_key_aesni
#define OFFSETOF_AESKEYLEN	480
#define OFFSETOF_H_POWERS	496
#define OFFSETOF_H_POWERS_XORED	624
#define OFFSETOF_H_TIMES_X64	688

.text

// Do a vpclmulqdq, or fall back to a movdqa and a pclmulqdq.  The fallback
// assumes that all operands are distinct and that any mem operand is aligned.
.macro	_vpclmulqdq	imm, src1, src2, dst
.if USE_AVX
	vpclmulqdq	\imm, \src1, \src2, \dst
.else
	movdqa		\src2, \dst
	pclmulqdq	\imm, \src1, \dst
.endif
.endm

// Do a vpshufb, or fall back to a movdqa and a pshufb.  The fallback assumes
// that all operands are distinct and that any mem operand is aligned.
.macro	_vpshufb	src1, src2, dst
.if USE_AVX
	vpshufb		\src1, \src2, \dst
.else
	movdqa		\src2, \dst
	pshufb		\src1, \dst
.endif
.endm

// Do a vpand, or fall back to a movdqu and a pand.  The fallback assumes that
// all operands are distinct.
.macro	_vpand		src1, src2, dst
.if USE_AVX
	vpand		\src1, \src2, \dst
.else
	movdqu		\src1, \dst
	pand		\src2, \dst
.endif
.endm

// XOR the unaligned memory operand \mem into the xmm register \reg.  \tmp must
// be a temporary xmm register.
.macro	_xor_mem_to_reg	mem, reg, tmp
.if USE_AVX
	vpxor		\mem, \reg, \reg
.else
	movdqu		\mem, \tmp
	pxor		\tmp, \reg
.endif
.endm

// Test the unaligned memory operand \mem against the xmm register \reg.  \tmp
// must be a temporary xmm register.
.macro	_test_mem	mem, reg, tmp
.if USE_AVX
	vptest		\mem, \reg
.else
	movdqu		\mem, \tmp
	ptest		\tmp, \reg
.endif
.endm

// Load 1 <= %ecx <= 15 bytes from the pointer \src into the xmm register \dst
// and zeroize any remaining bytes.  Clobbers %rax, %rcx, and \tmp{64,32}.
.macro	_load_partial_block	src, dst, tmp64, tmp32
	sub		$8, %ecx		// LEN - 8
	jle		.Lle8\@

	// Load 9 <= LEN <= 15 bytes.
	movq		(\src), \dst		// Load first 8 bytes
	mov		(\src, %rcx), %rax	// Load last 8 bytes
	neg		%ecx
	shl		$3, %ecx
	shr		%cl, %rax		// Discard overlapping bytes
	pinsrq		$1, %rax, \dst
	jmp		.Ldone\@

.Lle8\@:
	add		$4, %ecx		// LEN - 4
	jl		.Llt4\@

	// Load 4 <= LEN <= 8 bytes.
	mov		(\src), %eax		// Load first 4 bytes
	mov		(\src, %rcx), \tmp32	// Load last 4 bytes
	jmp		.Lcombine\@

.Llt4\@:
	// Load 1 <= LEN <= 3 bytes.
	add		$2, %ecx		// LEN - 2
	movzbl		(\src), %eax		// Load first byte
	jl		.Lmovq\@
	movzwl		(\src, %rcx), \tmp32	// Load last 2 bytes
.Lcombine\@:
	shl		$3, %ecx
	shl		%cl, \tmp64
	or		\tmp64, %rax		// Combine the two parts
.Lmovq\@:
	movq		%rax, \dst
.Ldone\@:
.endm

// Store 1 <= %ecx <= 15 bytes from the xmm register \src to the pointer \dst.
// Clobbers %rax, %rcx, and %rsi.
.macro	_store_partial_block	src, dst
	sub		$8, %ecx		// LEN - 8
	jl		.Llt8\@

	// Store 8 <= LEN <= 15 bytes.
	pextrq		$1, \src, %rax
	mov		%ecx, %esi
	shl		$3, %ecx
	ror		%cl, %rax
	mov		%rax, (\dst, %rsi)	// Store last LEN - 8 bytes
	movq		\src, (\dst)		// Store first 8 bytes
	jmp		.Ldone\@

.Llt8\@:
	add		$4, %ecx		// LEN - 4
	jl		.Llt4\@

	// Store 4 <= LEN <= 7 bytes.
	pextrd		$1, \src, %eax
	mov		%ecx, %esi
	shl		$3, %ecx
	ror		%cl, %eax
	mov		%eax, (\dst, %rsi)	// Store last LEN - 4 bytes
	movd		\src, (\dst)		// Store first 4 bytes
	jmp		.Ldone\@

.Llt4\@:
	// Store 1 <= LEN <= 3 bytes.
	pextrb		$0, \src, 0(\dst)
	cmp		$-2, %ecx		// LEN - 4 == -2, i.e. LEN == 2?
	jl		.Ldone\@
	pextrb		$1, \src, 1(\dst)
	je		.Ldone\@
	pextrb		$2, \src, 2(\dst)
.Ldone\@:
.endm

// Do one step of GHASH-multiplying \a by \b and storing the reduced product in
// \b.  To complete all steps, this must be invoked with \i=0 through \i=9.
// \a_times_x64 must contain \a * x^64 in reduced form, \gfpoly must contain the
// .Lgfpoly constant, and \t0-\t1 must be temporary registers.
.macro	_ghash_mul_step	i, a, a_times_x64, b, gfpoly, t0, t1

	// MI = (a_L * b_H) + ((a*x^64)_L * b_L)
.if \i == 0
	_vpclmulqdq	$0x01, \a, \b, \t0
.elseif \i == 1
	_vpclmulqdq	$0x00, \a_times_x64, \b, \t1
.elseif \i == 2
	pxor		\t1, \t0

	// HI = (a_H * b_H) + ((a*x^64)_H * b_L)
.elseif \i == 3
	_vpclmulqdq	$0x11, \a, \b, \t1
.elseif \i == 4
	pclmulqdq	$0x10, \a_times_x64, \b
.elseif \i == 5
	pxor		\t1, \b
.elseif \i == 6

	// Fold MI into HI.
	pshufd		$0x4e, \t0, \t1		// Swap halves of MI
.elseif \i == 7
	pclmulqdq	$0x00, \gfpoly, \t0	// MI_L*(x^63 + x^62 + x^57)
.elseif \i == 8
	pxor		\t1, \b
.elseif \i == 9
	pxor		\t0, \b
.endif
.endm

// GHASH-multiply \a by \b and store the reduced product in \b.
// See _ghash_mul_step for details.
.macro	_ghash_mul	a, a_times_x64, b, gfpoly, t0, t1
.irp i, 0,1,2,3,4,5,6,7,8,9
	_ghash_mul_step	\i, \a, \a_times_x64, \b, \gfpoly, \t0, \t1
.endr
.endm

// GHASH-multiply \a by \b and add the unreduced product to \lo, \mi, and \hi.
// This does Karatsuba multiplication and must be paired with _ghash_reduce.  On
// the first call, \lo, \mi, and \hi must be zero.  \a_xored must contain the
// two halves of \a XOR'd together, i.e. a_L + a_H.  \b is clobbered.
.macro	_ghash_mul_noreduce	a, a_xored, b, lo, mi, hi, t0

	// LO += a_L * b_L
	_vpclmulqdq	$0x00, \a, \b, \t0
	pxor		\t0, \lo

	// b_L + b_H
	pshufd		$0x4e, \b, \t0
	pxor		\b, \t0

	// HI += a_H * b_H
	pclmulqdq	$0x11, \a, \b
	pxor		\b, \hi

	// MI += (a_L + a_H) * (b_L + b_H)
	pclmulqdq	$0x00, \a_xored, \t0
	pxor		\t0, \mi
.endm

// Reduce the product from \lo, \mi, and \hi, and store the result in \dst.
// This assumes that _ghash_mul_noreduce was used.
.macro	_ghash_reduce	lo, mi, hi, dst, t0

	movq		.Lgfpoly(%rip), \t0

	// MI += LO + HI (needed because we used Karatsuba multiplication)
	pxor		\lo, \mi
	pxor		\hi, \mi

	// Fold LO into MI.
	pshufd		$0x4e, \lo, \dst
	pclmulqdq	$0x00, \t0, \lo
	pxor		\dst, \mi
	pxor		\lo, \mi

	// Fold MI into HI.
	pshufd		$0x4e, \mi, \dst
	pclmulqdq	$0x00, \t0, \mi
	pxor		\hi, \dst
	pxor		\mi, \dst
.endm

// Do the first step of the GHASH update of a set of 8 ciphertext blocks.
//
// The whole GHASH update does:
//
//	GHASH_ACC = (blk0+GHASH_ACC)*H^8 + blk1*H^7 + blk2*H^6 + blk3*H^5 +
//				blk4*H^4 + blk5*H^3 + blk6*H^2 + blk7*H^1
//
// This macro just does the first step: it does the unreduced multiplication
// (blk0+GHASH_ACC)*H^8 and starts gathering the unreduced product in the xmm
// registers LO, MI, and GHASH_ACC a.k.a. HI.  It also zero-initializes the
// inner block counter in %rax, which is a value that counts up by 8 for each
// block in the set of 8 and is used later to index by 8*blknum and 16*blknum.
//
// To reduce the number of pclmulqdq instructions required, both this macro and
// _ghash_update_continue_8x use Karatsuba multiplication instead of schoolbook
// multiplication.  See the file comment for more details about this choice.
//
// Both macros expect the ciphertext blocks blk[0-7] to be available at DST if
// encrypting, or SRC if decrypting.  They also expect the precomputed hash key
// powers H^i and their XOR'd-together halves to be available in the struct
// pointed to by KEY.  Both macros clobber TMP[0-2].
.macro	_ghash_update_begin_8x	enc

	// Initialize the inner block counter.
	xor		%eax, %eax

	// Load the highest hash key power, H^8.
	movdqa		OFFSETOF_H_POWERS(KEY), TMP0

	// Load the first ciphertext block and byte-reflect it.
.if \enc
	movdqu		(DST), TMP1
.else
	movdqu		(SRC), TMP1
.endif
	pshufb		BSWAP_MASK, TMP1

	// Add the GHASH accumulator to the ciphertext block to get the block
	// 'b' that needs to be multiplied with the hash key power 'a'.
	pxor		TMP1, GHASH_ACC

	// b_L + b_H
	pshufd		$0x4e, GHASH_ACC, MI
	pxor		GHASH_ACC, MI

	// LO = a_L * b_L
	_vpclmulqdq	$0x00, TMP0, GHASH_ACC, LO

	// HI = a_H * b_H
	pclmulqdq	$0x11, TMP0, GHASH_ACC

	// MI = (a_L + a_H) * (b_L + b_H)
	pclmulqdq	$0x00, OFFSETOF_H_POWERS_XORED(KEY), MI
.endm

// Continue the GHASH update of 8 ciphertext blocks as described above by doing
// an unreduced multiplication of the next ciphertext block by the next lowest
// key power and accumulating the result into LO, MI, and GHASH_ACC a.k.a. HI.
.macro	_ghash_update_continue_8x enc
	add		$8, %eax

	// Load the next lowest key power.
	movdqa		OFFSETOF_H_POWERS(KEY,%rax,2), TMP0

	// Load the next ciphertext block and byte-reflect it.
.if \enc
	movdqu		(DST,%rax,2), TMP1
.else
	movdqu		(SRC,%rax,2), TMP1
.endif
	pshufb		BSWAP_MASK, TMP1

	// LO += a_L * b_L
	_vpclmulqdq	$0x00, TMP0, TMP1, TMP2
	pxor		TMP2, LO

	// b_L + b_H
	pshufd		$0x4e, TMP1, TMP2
	pxor		TMP1, TMP2

	// HI += a_H * b_H
	pclmulqdq	$0x11, TMP0, TMP1
	pxor		TMP1, GHASH_ACC

	// MI += (a_L + a_H) * (b_L + b_H)
	movq		OFFSETOF_H_POWERS_XORED(KEY,%rax), TMP1
	pclmulqdq	$0x00, TMP1, TMP2
	pxor		TMP2, MI
.endm

// Reduce LO, MI, and GHASH_ACC a.k.a. HI into GHASH_ACC.  This is similar to
// _ghash_reduce, but it's hardcoded to use the registers of the main loop and
// it uses the same register for HI and the destination.  It's also divided into
// two steps.  TMP1 must be preserved across steps.
//
// One pshufd could be saved by shuffling MI and XOR'ing LO into it, instead of
// shuffling LO, XOR'ing LO into MI, and shuffling MI.  However, this would
// increase the critical path length, and it seems to slightly hurt performance.
.macro	_ghash_update_end_8x_step	i
.if \i == 0
	movq		.Lgfpoly(%rip), TMP1
	pxor		LO, MI
	pxor		GHASH_ACC, MI
	pshufd		$0x4e, LO, TMP2
	pclmulqdq	$0x00, TMP1, LO
	pxor		TMP2, MI
	pxor		LO, MI
.elseif \i == 1
	pshufd		$0x4e, MI, TMP2
	pclmulqdq	$0x00, TMP1, MI
	pxor		TMP2, GHASH_ACC
	pxor		MI, GHASH_ACC
.endif
.endm

// void aes_gcm_precompute_##suffix(struct aes_gcm_key_aesni *key);
//
// Given the expanded AES key, derive the GHASH subkey and initialize the GHASH
// related fields in the key struct.
.macro	_aes_gcm_precompute

	// Function arguments
	.set	KEY,		%rdi

	// Additional local variables.
	// %xmm0-%xmm1 and %rax are used as temporaries.
	.set	RNDKEYLAST_PTR,	%rsi
	.set	H_CUR,		%xmm2
	.set	H_POW1,		%xmm3	// H^1
	.set	H_POW1_X64,	%xmm4	// H^1 * x^64
	.set	GFPOLY,		%xmm5

	// Encrypt an all-zeroes block to get the raw hash subkey.
	movl		OFFSETOF_AESKEYLEN(KEY), %eax
	lea		6*16(KEY,%rax,4), RNDKEYLAST_PTR
	movdqa		(KEY), H_POW1  // Zero-th round key XOR all-zeroes block
	lea		16(KEY), %rax
1:
	aesenc		(%rax), H_POW1
	add		$16, %rax
	cmp		%rax, RNDKEYLAST_PTR
	jne		1b
	aesenclast	(RNDKEYLAST_PTR), H_POW1

	// Preprocess the raw hash subkey as needed to operate on GHASH's
	// bit-reflected values directly: reflect its bytes, then multiply it by
	// x^-1 (using the backwards interpretation of polynomial coefficients
	// from the GCM spec) or equivalently x^1 (using the alternative,
	// natural interpretation of polynomial coefficients).
	pshufb		.Lbswap_mask(%rip), H_POW1
	movdqa		H_POW1, %xmm0
	pshufd		$0xd3, %xmm0, %xmm0
	psrad		$31, %xmm0
	paddq		H_POW1, H_POW1
	pand		.Lgfpoly_and_internal_carrybit(%rip), %xmm0
	pxor		%xmm0, H_POW1

	// Store H^1.
	movdqa		H_POW1, OFFSETOF_H_POWERS+7*16(KEY)

	// Compute and store H^1 * x^64.
	movq		.Lgfpoly(%rip), GFPOLY
	pshufd		$0x4e, H_POW1, %xmm0
	_vpclmulqdq	$0x00, H_POW1, GFPOLY, H_POW1_X64
	pxor		%xmm0, H_POW1_X64
	movdqa		H_POW1_X64, OFFSETOF_H_TIMES_X64(KEY)

	// Compute and store the halves of H^1 XOR'd together.
	pxor		H_POW1, %xmm0
	movq		%xmm0, OFFSETOF_H_POWERS_XORED+7*8(KEY)

	// Compute and store the remaining key powers H^2 through H^8.
	movdqa		H_POW1, H_CUR
	mov		$6*8, %eax
.Lprecompute_next\@:
	// Compute H^i = H^{i-1} * H^1.
	_ghash_mul	H_POW1, H_POW1_X64, H_CUR, GFPOLY, %xmm0, %xmm1
	// Store H^i.
	movdqa		H_CUR, OFFSETOF_H_POWERS(KEY,%rax,2)
	// Compute and store the halves of H^i XOR'd together.
	pshufd		$0x4e, H_CUR, %xmm0
	pxor		H_CUR, %xmm0
	movq		%xmm0, OFFSETOF_H_POWERS_XORED(KEY,%rax)
	sub		$8, %eax
	jge		.Lprecompute_next\@

	RET
.endm

// void aes_gcm_aad_update_aesni(const struct aes_gcm_key_aesni *key,
//				 u8 ghash_acc[16], const u8 *aad, int aadlen);
//
// This function processes the AAD (Additional Authenticated Data) in GCM.
// Using the key |key|, it updates the GHASH accumulator |ghash_acc| with the
// data given by |aad| and |aadlen|.  On the first call, |ghash_acc| must be all
// zeroes.  |aadlen| must be a multiple of 16, except on the last call where it
// can be any length.  The caller must do any buffering needed to ensure this.
.macro	_aes_gcm_aad_update

	// Function arguments
	.set	KEY,		%rdi
	.set	GHASH_ACC_PTR,	%rsi
	.set	AAD,		%rdx
	.set	AADLEN,		%ecx
	// Note: _load_partial_block relies on AADLEN being in %ecx.

	// Additional local variables.
	// %rax, %r10, and %xmm0-%xmm1 are used as temporary registers.
	.set	BSWAP_MASK,	%xmm2
	.set	GHASH_ACC,	%xmm3
	.set	H_POW1,		%xmm4	// H^1
	.set	H_POW1_X64,	%xmm5	// H^1 * x^64
	.set	GFPOLY,		%xmm6

	movdqa		.Lbswap_mask(%rip), BSWAP_MASK
	movdqu		(GHASH_ACC_PTR), GHASH_ACC
	movdqa		OFFSETOF_H_POWERS+7*16(KEY), H_POW1
	movdqa		OFFSETOF_H_TIMES_X64(KEY), H_POW1_X64
	movq		.Lgfpoly(%rip), GFPOLY

	// Process the AAD one full block at a time.
	sub		$16, AADLEN
	jl		.Laad_loop_1x_done\@
.Laad_loop_1x\@:
	movdqu		(AAD), %xmm0
	pshufb		BSWAP_MASK, %xmm0
	pxor		%xmm0, GHASH_ACC
	_ghash_mul	H_POW1, H_POW1_X64, GHASH_ACC, GFPOLY, %xmm0, %xmm1
	add		$16, AAD
	sub		$16, AADLEN
	jge		.Laad_loop_1x\@
.Laad_loop_1x_done\@:
	// Check whether there is a partial block at the end.
	add		$16, AADLEN
	jz		.Laad_done\@

	// Process a partial block of length 1 <= AADLEN <= 15.
	// _load_partial_block assumes that %ecx contains AADLEN.
	_load_partial_block	AAD, %xmm0, %r10, %r10d
	pshufb		BSWAP_MASK, %xmm0
	pxor		%xmm0, GHASH_ACC
	_ghash_mul	H_POW1, H_POW1_X64, GHASH_ACC, GFPOLY, %xmm0, %xmm1

.Laad_done\@:
	movdqu		GHASH_ACC, (GHASH_ACC_PTR)
	RET
.endm

// Increment LE_CTR eight times to generate eight little-endian counter blocks,
// swap each to big-endian, and store them in AESDATA[0-7].  Also XOR them with
// the zero-th AES round key.  Clobbers TMP0 and TMP1.
.macro	_ctr_begin_8x
	movq		.Lone(%rip), TMP0
	movdqa		(KEY), TMP1		// zero-th round key
.irp i, 0,1,2,3,4,5,6,7
	_vpshufb	BSWAP_MASK, LE_CTR, AESDATA\i
	pxor		TMP1, AESDATA\i
	paddd		TMP0, LE_CTR
.endr
.endm

// Do a non-last round of AES on AESDATA[0-7] using \round_key.
.macro	_aesenc_8x	round_key
.irp i, 0,1,2,3,4,5,6,7
	aesenc		\round_key, AESDATA\i
.endr
.endm

// Do the last round of AES on AESDATA[0-7] using \round_key.
.macro	_aesenclast_8x	round_key
.irp i, 0,1,2,3,4,5,6,7
	aesenclast	\round_key, AESDATA\i
.endr
.endm

// XOR eight blocks from SRC with the keystream blocks in AESDATA[0-7], and
// store the result to DST.  Clobbers TMP0.
.macro	_xor_data_8x
.irp i, 0,1,2,3,4,5,6,7
	_xor_mem_to_reg	\i*16(SRC), AESDATA\i, tmp=TMP0
.endr
.irp i, 0,1,2,3,4,5,6,7
	movdqu		AESDATA\i, \i*16(DST)
.endr
.endm

// void aes_gcm_{enc,dec}_update_##suffix(const struct aes_gcm_key_aesni *key,
//					  const u32 le_ctr[4], u8 ghash_acc[16],
//					  const u8 *src, u8 *dst, int datalen);
//
// This macro generates a GCM encryption or decryption update function with the
// above prototype (with \enc selecting which one).
//
// This function computes the next portion of the CTR keystream, XOR's it with
// |datalen| bytes from |src|, and writes the resulting encrypted or decrypted
// data to |dst|.  It also updates the GHASH accumulator |ghash_acc| using the
// next |datalen| ciphertext bytes.
//
// |datalen| must be a multiple of 16, except on the last call where it can be
// any length.  The caller must do any buffering needed to ensure this.  Both
// in-place and out-of-place en/decryption are supported.
//
// |le_ctr| must give the current counter in little-endian format.  For a new
// message, the low word of the counter must be 2.  This function loads the
// counter from |le_ctr| and increments the loaded counter as needed, but it
// does *not* store the updated counter back to |le_ctr|.  The caller must
// update |le_ctr| if any more data segments follow.  Internally, only the low
// 32-bit word of the counter is incremented, following the GCM standard.
.macro	_aes_gcm_update	enc

	// Function arguments
	.set	KEY,		%rdi
	.set	LE_CTR_PTR,	%rsi	// Note: overlaps with usage as temp reg
	.set	GHASH_ACC_PTR,	%rdx
	.set	SRC,		%rcx
	.set	DST,		%r8
	.set	DATALEN,	%r9d
	.set	DATALEN64,	%r9	// Zero-extend DATALEN before using!
	// Note: the code setting up for _load_partial_block assumes that SRC is
	// in %rcx (and that DATALEN is *not* in %rcx).

	// Additional local variables

	// %rax and %rsi are used as temporary registers.  Note: %rsi overlaps
	// with LE_CTR_PTR, which is used only at the beginning.

	.set	AESKEYLEN,	%r10d	// AES key length in bytes
	.set	AESKEYLEN64,	%r10
	.set	RNDKEYLAST_PTR,	%r11	// Pointer to last AES round key

	// Put the most frequently used values in %xmm0-%xmm7 to reduce code
	// size.  (%xmm0-%xmm7 take fewer bytes to encode than %xmm8-%xmm15.)
	.set	TMP0,		%xmm0
	.set	TMP1,		%xmm1
	.set	TMP2,		%xmm2
	.set	LO,		%xmm3	// Low part of unreduced product
	.set	MI,		%xmm4	// Middle part of unreduced product
	.set	GHASH_ACC,	%xmm5	// GHASH accumulator; in main loop also
					// the high part of unreduced product
	.set	BSWAP_MASK,	%xmm6	// Shuffle mask for reflecting bytes
	.set	LE_CTR,		%xmm7	// Little-endian counter value
	.set	AESDATA0,	%xmm8
	.set	AESDATA1,	%xmm9
	.set	AESDATA2,	%xmm10
	.set	AESDATA3,	%xmm11
	.set	AESDATA4,	%xmm12
	.set	AESDATA5,	%xmm13
	.set	AESDATA6,	%xmm14
	.set	AESDATA7,	%xmm15

	movdqa		.Lbswap_mask(%rip), BSWAP_MASK
	movdqu		(GHASH_ACC_PTR), GHASH_ACC
	movdqu		(LE_CTR_PTR), LE_CTR

	movl		OFFSETOF_AESKEYLEN(KEY), AESKEYLEN
	lea		6*16(KEY,AESKEYLEN64,4), RNDKEYLAST_PTR

	// If there are at least 8*16 bytes of data, then continue into the main
	// loop, which processes 8*16 bytes of data per iteration.
	//
	// The main loop interleaves AES and GHASH to improve performance on
	// CPUs that can execute these instructions in parallel.  When
	// decrypting, the GHASH input (the ciphertext) is immediately
	// available.  When encrypting, we instead encrypt a set of 8 blocks
	// first and then GHASH those blocks while encrypting the next set of 8,
	// repeat that as needed, and finally GHASH the last set of 8 blocks.
	//
	// Code size optimization: Prefer adding or subtracting -8*16 over 8*16,
	// as this makes the immediate fit in a signed byte, saving 3 bytes.
	add		$-8*16, DATALEN
	jl		.Lcrypt_loop_8x_done\@
.if \enc
	// Encrypt the first 8 plaintext blocks.
	_ctr_begin_8x
	lea		16(KEY), %rsi
	.p2align 4
1:
	movdqa		(%rsi), TMP0
	_aesenc_8x	TMP0
	add		$16, %rsi
	cmp		%rsi, RNDKEYLAST_PTR
	jne		1b
	movdqa		(%rsi), TMP0
	_aesenclast_8x	TMP0
	_xor_data_8x
	// Don't increment DST until the ciphertext blocks have been hashed.
	sub		$-8*16, SRC
	add		$-8*16, DATALEN
	jl		.Lghash_last_ciphertext_8x\@
.endif

	.p2align 4
.Lcrypt_loop_8x\@:

	// Generate the next set of 8 counter blocks and start encrypting them.
	_ctr_begin_8x
	lea		16(KEY), %rsi

	// Do a round of AES, and start the GHASH update of 8 ciphertext blocks
	// by doing the unreduced multiplication for the first ciphertext block.
	movdqa		(%rsi), TMP0
	add		$16, %rsi
	_aesenc_8x	TMP0
	_ghash_update_begin_8x \enc

	// Do 7 more rounds of AES, and continue the GHASH update by doing the
	// unreduced multiplication for the remaining ciphertext blocks.
	.p2align 4
1:
	movdqa		(%rsi), TMP0
	add		$16, %rsi
	_aesenc_8x	TMP0
	_ghash_update_continue_8x \enc
	cmp		$7*8, %eax
	jne		1b

	// Do the remaining AES rounds.
	.p2align 4
1:
	movdqa		(%rsi), TMP0
	add		$16, %rsi
	_aesenc_8x	TMP0
	cmp		%rsi, RNDKEYLAST_PTR
	jne		1b

	// Do the GHASH reduction and the last round of AES.
	movdqa		(RNDKEYLAST_PTR), TMP0
	_ghash_update_end_8x_step	0
	_aesenclast_8x	TMP0
	_ghash_update_end_8x_step	1

	// XOR the data with the AES-CTR keystream blocks.
.if \enc
	sub		$-8*16, DST
.endif
	_xor_data_8x
	sub		$-8*16, SRC
.if !\enc
	sub		$-8*16, DST
.endif
	add		$-8*16, DATALEN
	jge		.Lcrypt_loop_8x\@

.if \enc
.Lghash_last_ciphertext_8x\@:
	// Update GHASH with the last set of 8 ciphertext blocks.
	_ghash_update_begin_8x		\enc
	.p2align 4
1:
	_ghash_update_continue_8x	\enc
	cmp		$7*8, %eax
	jne		1b
	_ghash_update_end_8x_step	0
	_ghash_update_end_8x_step	1
	sub		$-8*16, DST
.endif

.Lcrypt_loop_8x_done\@:

	sub		$-8*16, DATALEN
	jz		.Ldone\@

	// Handle the remainder of length 1 <= DATALEN < 8*16 bytes.  We keep
	// things simple and keep the code size down by just going one block at
	// a time, again taking advantage of hardware loop unrolling.  Since
	// there are enough key powers available for all remaining data, we do
	// the GHASH multiplications unreduced, and only reduce at the very end.

	.set	HI,		TMP2
	.set	H_POW,		AESDATA0
	.set	H_POW_XORED,	AESDATA1
	.set	ONE,		AESDATA2

	movq		.Lone(%rip), ONE

	// Start collecting the unreduced GHASH intermediate value LO, MI, HI.
	pxor		LO, LO
	pxor		MI, MI
	pxor		HI, HI

	// Set up a block counter %rax to contain 8*(8-n), where n is the number
	// of blocks that remain, counting any partial block.  This will be used
	// to access the key powers H^n through H^1.
	mov		DATALEN, %eax
	neg		%eax
	and		$~15, %eax
	sar		$1, %eax
	add		$64, %eax

	sub		$16, DATALEN
	jl		.Lcrypt_loop_1x_done\@

	// Process the data one full block at a time.
.Lcrypt_loop_1x\@:

	// Encrypt the next counter block.
	_vpshufb	BSWAP_MASK, LE_CTR, TMP0
	paddd		ONE, LE_CTR
	pxor		(KEY), TMP0
	lea		-6*16(RNDKEYLAST_PTR), %rsi	// Reduce code size
	cmp		$24, AESKEYLEN
	jl		128f	// AES-128?
	je		192f	// AES-192?
	// AES-256
	aesenc		-7*16(%rsi), TMP0
	aesenc		-6*16(%rsi), TMP0
192:
	aesenc		-5*16(%rsi), TMP0
	aesenc		-4*16(%rsi), TMP0
128:
.irp i, -3,-2,-1,0,1,2,3,4,5
	aesenc		\i*16(%rsi), TMP0
.endr
	aesenclast	(RNDKEYLAST_PTR), TMP0

	// Load the next key power H^i.
	movdqa		OFFSETOF_H_POWERS(KEY,%rax,2), H_POW
	movq		OFFSETOF_H_POWERS_XORED(KEY,%rax), H_POW_XORED

	// XOR the keystream block that was just generated in TMP0 with the next
	// source data block and store the resulting en/decrypted data to DST.
.if \enc
	_xor_mem_to_reg	(SRC), TMP0, tmp=TMP1
	movdqu		TMP0, (DST)
.else
	movdqu		(SRC), TMP1
	pxor		TMP1, TMP0
	movdqu		TMP0, (DST)
.endif

	// Update GHASH with the ciphertext block.
.if \enc
	pshufb		BSWAP_MASK, TMP0
	pxor		TMP0, GHASH_ACC
.else
	pshufb		BSWAP_MASK, TMP1
	pxor		TMP1, GHASH_ACC
.endif
	_ghash_mul_noreduce	H_POW, H_POW_XORED, GHASH_ACC, LO, MI, HI, TMP0
	pxor		GHASH_ACC, GHASH_ACC

	add		$8, %eax
	add		$16, SRC
	add		$16, DST
	sub		$16, DATALEN
	jge		.Lcrypt_loop_1x\@
.Lcrypt_loop_1x_done\@:
	// Check whether there is a partial block at the end.
	add		$16, DATALEN
	jz		.Lghash_reduce\@

	// Process a partial block of length 1 <= DATALEN <= 15.

	// Encrypt a counter block for the last time.
	pshufb		BSWAP_MASK, LE_CTR
	pxor		(KEY), LE_CTR
	lea		16(KEY), %rsi
1:
	aesenc		(%rsi), LE_CTR
	add		$16, %rsi
	cmp		%rsi, RNDKEYLAST_PTR
	jne		1b
	aesenclast	(RNDKEYLAST_PTR), LE_CTR

	// Load the lowest key power, H^1.
	movdqa		OFFSETOF_H_POWERS(KEY,%rax,2), H_POW
	movq		OFFSETOF_H_POWERS_XORED(KEY,%rax), H_POW_XORED

	// Load and zero-pad 1 <= DATALEN <= 15 bytes of data from SRC.  SRC is
	// in %rcx, but _load_partial_block needs DATALEN in %rcx instead.
	// RNDKEYLAST_PTR is no longer needed, so reuse it for SRC.
	mov		SRC, RNDKEYLAST_PTR
	mov		DATALEN, %ecx
	_load_partial_block	RNDKEYLAST_PTR, TMP0, %rsi, %esi

	// XOR the keystream block that was just generated in LE_CTR with the
	// source data block and store the resulting en/decrypted data to DST.
	pxor		TMP0, LE_CTR
	mov		DATALEN, %ecx
	_store_partial_block	LE_CTR, DST

	// If encrypting, zero-pad the final ciphertext block for GHASH.  (If
	// decrypting, this was already done by _load_partial_block.)
.if \enc
	lea		.Lzeropad_mask+16(%rip), %rax
	sub		DATALEN64, %rax
	_vpand		(%rax), LE_CTR, TMP0
.endif

	// Update GHASH with the final ciphertext block.
	pshufb		BSWAP_MASK, TMP0
	pxor		TMP0, GHASH_ACC
	_ghash_mul_noreduce	H_POW, H_POW_XORED, GHASH_ACC, LO, MI, HI, TMP0

.Lghash_reduce\@:
	// Finally, do the GHASH reduction.
	_ghash_reduce	LO, MI, HI, GHASH_ACC, TMP0

.Ldone\@:
	// Store the updated GHASH accumulator back to memory.
	movdqu		GHASH_ACC, (GHASH_ACC_PTR)

	RET
.endm

// void aes_gcm_enc_final_##suffix(const struct aes_gcm_key_aesni *key,
//				   const u32 le_ctr[4], u8 ghash_acc[16],
//				   u64 total_aadlen, u64 total_datalen);
// bool aes_gcm_dec_final_##suffix(const struct aes_gcm_key_aesni *key,
//				   const u32 le_ctr[4], const u8 ghash_acc[16],
//				   u64 total_aadlen, u64 total_datalen,
//				   const u8 tag[16], int taglen);
//
// This macro generates one of the above two functions (with \enc selecting
// which one).  Both functions finish computing the GCM authentication tag by
// updating GHASH with the lengths block and encrypting the GHASH accumulator.
// |total_aadlen| and |total_datalen| must be the total length of the additional
// authenticated data and the en/decrypted data in bytes, respectively.
//
// The encryption function then stores the full-length (16-byte) computed
// authentication tag to |ghash_acc|.  The decryption function instead loads the
// expected authentication tag (the one that was transmitted) from the 16-byte
// buffer |tag|, compares the first 4 <= |taglen| <= 16 bytes of it to the
// computed tag in constant time, and returns true if and only if they match.
.macro	_aes_gcm_final	enc

	// Function arguments
	.set	KEY,		%rdi
	.set	LE_CTR_PTR,	%rsi
	.set	GHASH_ACC_PTR,	%rdx
	.set	TOTAL_AADLEN,	%rcx
	.set	TOTAL_DATALEN,	%r8
	.set	TAG,		%r9
	.set	TAGLEN,		%r10d	// Originally at 8(%rsp)
	.set	TAGLEN64,	%r10

	// Additional local variables.
	// %rax and %xmm0-%xmm2 are used as temporary registers.
	.set	AESKEYLEN,	%r11d
	.set	AESKEYLEN64,	%r11
	.set	BSWAP_MASK,	%xmm3
	.set	GHASH_ACC,	%xmm4
	.set	H_POW1,		%xmm5	// H^1
	.set	H_POW1_X64,	%xmm6	// H^1 * x^64
	.set	GFPOLY,		%xmm7

	movdqa		.Lbswap_mask(%rip), BSWAP_MASK
	movl		OFFSETOF_AESKEYLEN(KEY), AESKEYLEN

	// Set up a counter block with 1 in the low 32-bit word.  This is the
	// counter that produces the ciphertext needed to encrypt the auth tag.
	movdqu		(LE_CTR_PTR), %xmm0
	mov		$1, %eax
	pinsrd		$0, %eax, %xmm0

	// Build the lengths block and XOR it into the GHASH accumulator.
	movq		TOTAL_DATALEN, GHASH_ACC
	pinsrq		$1, TOTAL_AADLEN, GHASH_ACC
	psllq		$3, GHASH_ACC	// Bytes to bits
	_xor_mem_to_reg	(GHASH_ACC_PTR), GHASH_ACC, %xmm1

	movdqa		OFFSETOF_H_POWERS+7*16(KEY), H_POW1
	movdqa		OFFSETOF_H_TIMES_X64(KEY), H_POW1_X64
	movq		.Lgfpoly(%rip), GFPOLY

	// Make %rax point to the 6th from last AES round key.  (Using signed
	// byte offsets -7*16 through 6*16 decreases code size.)
	lea		(KEY,AESKEYLEN64,4), %rax

	// AES-encrypt the counter block and also multiply GHASH_ACC by H^1.
	// Interleave the AES and GHASH instructions to improve performance.
	pshufb		BSWAP_MASK, %xmm0
	pxor		(KEY), %xmm0
	cmp		$24, AESKEYLEN
	jl		128f	// AES-128?
	je		192f	// AES-192?
	// AES-256
	aesenc		-7*16(%rax), %xmm0
	aesenc		-6*16(%rax), %xmm0
192:
	aesenc		-5*16(%rax), %xmm0
	aesenc		-4*16(%rax), %xmm0
128:
.irp i, 0,1,2,3,4,5,6,7,8
	aesenc		(\i-3)*16(%rax), %xmm0
	_ghash_mul_step	\i, H_POW1, H_POW1_X64, GHASH_ACC, GFPOLY, %xmm1, %xmm2
.endr
	aesenclast	6*16(%rax), %xmm0
	_ghash_mul_step	9, H_POW1, H_POW1_X64, GHASH_ACC, GFPOLY, %xmm1, %xmm2

	// Undo the byte reflection of the GHASH accumulator.
	pshufb		BSWAP_MASK, GHASH_ACC

	// Encrypt the GHASH accumulator.
	pxor		%xmm0, GHASH_ACC

.if \enc
	// Return the computed auth tag.
	movdqu		GHASH_ACC, (GHASH_ACC_PTR)
.else
	.set		ZEROPAD_MASK_PTR, TOTAL_AADLEN // Reusing TOTAL_AADLEN!

	// Verify the auth tag in constant time by XOR'ing the transmitted and
	// computed auth tags together and using the ptest instruction to check
	// whether the first TAGLEN bytes of the result are zero.
	_xor_mem_to_reg	(TAG), GHASH_ACC, tmp=%xmm0
	movl		8(%rsp), TAGLEN
	lea		.Lzeropad_mask+16(%rip), ZEROPAD_MASK_PTR
	sub		TAGLEN64, ZEROPAD_MASK_PTR
	xor		%eax, %eax
	_test_mem	(ZEROPAD_MASK_PTR), GHASH_ACC, tmp=%xmm0
	sete		%al
.endif
	RET
.endm

.set	USE_AVX, 0
SYM_FUNC_START(aes_gcm_precompute_aesni)
	_aes_gcm_precompute
SYM_FUNC_END(aes_gcm_precompute_aesni)
SYM_FUNC_START(aes_gcm_aad_update_aesni)
	_aes_gcm_aad_update
SYM_FUNC_END(aes_gcm_aad_update_aesni)
SYM_FUNC_START(aes_gcm_enc_update_aesni)
	_aes_gcm_update	1
SYM_FUNC_END(aes_gcm_enc_update_aesni)
SYM_FUNC_START(aes_gcm_dec_update_aesni)
	_aes_gcm_update	0
SYM_FUNC_END(aes_gcm_dec_update_aesni)
SYM_FUNC_START(aes_gcm_enc_final_aesni)
	_aes_gcm_final	1
SYM_FUNC_END(aes_gcm_enc_final_aesni)
SYM_FUNC_START(aes_gcm_dec_final_aesni)
	_aes_gcm_final	0
SYM_FUNC_END(aes_gcm_dec_final_aesni)

.set	USE_AVX, 1
SYM_FUNC_START(aes_gcm_precompute_aesni_avx)
	_aes_gcm_precompute
SYM_FUNC_END(aes_gcm_precompute_aesni_avx)
SYM_FUNC_START(aes_gcm_aad_update_aesni_avx)
	_aes_gcm_aad_update
SYM_FUNC_END(aes_gcm_aad_update_aesni_avx)
SYM_FUNC_START(aes_gcm_enc_update_aesni_avx)
	_aes_gcm_update	1
SYM_FUNC_END(aes_gcm_enc_update_aesni_avx)
SYM_FUNC_START(aes_gcm_dec_update_aesni_avx)
	_aes_gcm_update	0
SYM_FUNC_END(aes_gcm_dec_update_aesni_avx)
SYM_FUNC_START(aes_gcm_enc_final_aesni_avx)
	_aes_gcm_final	1
SYM_FUNC_END(aes_gcm_enc_final_aesni_avx)
SYM_FUNC_START(aes_gcm_dec_final_aesni_avx)
	_aes_gcm_final	0
SYM_FUNC_END(aes_gcm_dec_final_aesni_avx)