arch/x86/kvm/vmx/vmenter.S - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/linkage.h>
 #include <asm/asm.h>
 #include <asm/bitsperlong.h>
 #include <asm/kvm_vcpu_regs.h>
 #include <asm/nospec-branch.h>
 #include <asm/percpu.h>
 #include <asm/segment.h>
 #include "kvm-asm-offsets.h"
 #include "run_flags.h"

 #define WORD_SIZE (BITS_PER_LONG / 8)

 #define VCPU_RAX	__VCPU_REGS_RAX * WORD_SIZE
 #define VCPU_RCX	__VCPU_REGS_RCX * WORD_SIZE
 #define VCPU_RDX	__VCPU_REGS_RDX * WORD_SIZE
 #define VCPU_RBX	__VCPU_REGS_RBX * WORD_SIZE
 /* Intentionally omit RSP as it's context switched by hardware */
 #define VCPU_RBP	__VCPU_REGS_RBP * WORD_SIZE
 #define VCPU_RSI	__VCPU_REGS_RSI * WORD_SIZE
 #define VCPU_RDI	__VCPU_REGS_RDI * WORD_SIZE

 #ifdef CONFIG_X86_64
 #define VCPU_R8		__VCPU_REGS_R8  * WORD_SIZE
 #define VCPU_R9		__VCPU_REGS_R9  * WORD_SIZE
 #define VCPU_R10	__VCPU_REGS_R10 * WORD_SIZE
 #define VCPU_R11	__VCPU_REGS_R11 * WORD_SIZE
 #define VCPU_R12	__VCPU_REGS_R12 * WORD_SIZE
 #define VCPU_R13	__VCPU_REGS_R13 * WORD_SIZE
 #define VCPU_R14	__VCPU_REGS_R14 * WORD_SIZE
 #define VCPU_R15	__VCPU_REGS_R15 * WORD_SIZE
 #endif

 .macro VMX_DO_EVENT_IRQOFF call_insn call_target
 	/*
 	 * Unconditionally create a stack frame, getting the correct RSP on the
 	 * stack (for x86-64) would take two instructions anyways, and RBP can
 	 * be used to restore RSP to make objtool happy (see below).
 	 */
 	push %_ASM_BP
 	mov %_ASM_SP, %_ASM_BP

 #ifdef CONFIG_X86_64
 	/*
 	 * Align RSP to a 16-byte boundary (to emulate CPU behavior) before
 	 * creating the synthetic interrupt stack frame for the IRQ/NMI.
 	 */
 	and  $-16, %rsp
 	push $__KERNEL_DS
 	push %rbp
 #endif
 	pushf
 	push $__KERNEL_CS
 	\call_insn \call_target

 	/*
 	 * "Restore" RSP from RBP, even though IRET has already unwound RSP to
 	 * the correct value.  objtool doesn't know the callee will IRET and,
 	 * without the explicit restore, thinks the stack is getting walloped.
 	 * Using an unwind hint is problematic due to x86-64's dynamic alignment.
 	 */
 	mov %_ASM_BP, %_ASM_SP
 	pop %_ASM_BP
 	RET
 .endm

 .section .noinstr.text, "ax"

 /**
  * __vmx_vcpu_run - Run a vCPU via a transition to VMX guest mode
  * @vmx:	struct vcpu_vmx *
  * @regs:	unsigned long * (to guest registers)
  * @flags:	VMX_RUN_VMRESUME:	use VMRESUME instead of VMLAUNCH
  *		VMX_RUN_SAVE_SPEC_CTRL: save guest SPEC_CTRL into vmx->spec_ctrl
  *
  * Returns:
  *	0 on VM-Exit, 1 on VM-Fail
  */
 SYM_FUNC_START(__vmx_vcpu_run)
 	push %_ASM_BP
 	mov  %_ASM_SP, %_ASM_BP
 #ifdef CONFIG_X86_64
 	push %r15
 	push %r14
 	push %r13
 	push %r12
 #else
 	push %edi
 	push %esi
 #endif
 	push %_ASM_BX

 	/* Save @vmx for SPEC_CTRL handling */
 	push %_ASM_ARG1

 	/* Save @flags for SPEC_CTRL handling */
 	push %_ASM_ARG3

 	/*
 	 * Save @regs, _ASM_ARG2 may be modified by vmx_update_host_rsp() and
 	 * @regs is needed after VM-Exit to save the guest's register values.
 	 */
 	push %_ASM_ARG2

 	/* Copy @flags to EBX, _ASM_ARG3 is volatile. */
 	mov %_ASM_ARG3L, %ebx

 	lea (%_ASM_SP), %_ASM_ARG2
 	call vmx_update_host_rsp

 	ALTERNATIVE "jmp .Lspec_ctrl_done", "", X86_FEATURE_MSR_SPEC_CTRL

 	/*
 	 * SPEC_CTRL handling: if the guest's SPEC_CTRL value differs from the
 	 * host's, write the MSR.
 	 *
 	 * IMPORTANT: To avoid RSB underflow attacks and any other nastiness,
 	 * there must not be any returns or indirect branches between this code
 	 * and vmentry.
 	 */
 	mov 2*WORD_SIZE(%_ASM_SP), %_ASM_DI
 	movl VMX_spec_ctrl(%_ASM_DI), %edi
 	movl PER_CPU_VAR(x86_spec_ctrl_current), %esi
 	cmp %edi, %esi
 	je .Lspec_ctrl_done
 	mov $MSR_IA32_SPEC_CTRL, %ecx
 	xor %edx, %edx
 	mov %edi, %eax
 	wrmsr

 .Lspec_ctrl_done:

 	/*
 	 * Since vmentry is serializing on affected CPUs, there's no need for
 	 * an LFENCE to stop speculation from skipping the wrmsr.
 	 */

 	/* Load @regs to RAX. */
 	mov (%_ASM_SP), %_ASM_AX

 	/* Check if vmlaunch or vmresume is needed */
 	bt   $VMX_RUN_VMRESUME_SHIFT, %ebx

 	/* Load guest registers.  Don't clobber flags. */
 	mov VCPU_RCX(%_ASM_AX), %_ASM_CX
 	mov VCPU_RDX(%_ASM_AX), %_ASM_DX
 	mov VCPU_RBX(%_ASM_AX), %_ASM_BX
 	mov VCPU_RBP(%_ASM_AX), %_ASM_BP
 	mov VCPU_RSI(%_ASM_AX), %_ASM_SI
 	mov VCPU_RDI(%_ASM_AX), %_ASM_DI
 #ifdef CONFIG_X86_64
 	mov VCPU_R8 (%_ASM_AX),  %r8
 	mov VCPU_R9 (%_ASM_AX),  %r9
 	mov VCPU_R10(%_ASM_AX), %r10
 	mov VCPU_R11(%_ASM_AX), %r11
 	mov VCPU_R12(%_ASM_AX), %r12
 	mov VCPU_R13(%_ASM_AX), %r13
 	mov VCPU_R14(%_ASM_AX), %r14
 	mov VCPU_R15(%_ASM_AX), %r15
 #endif
 	/* Load guest RAX.  This kills the @regs pointer! */
 	mov VCPU_RAX(%_ASM_AX), %_ASM_AX

 	/* Clobbers EFLAGS.ZF */
 	CLEAR_CPU_BUFFERS

 	/* Check EFLAGS.CF from the VMX_RUN_VMRESUME bit test above. */
 	jnc .Lvmlaunch

 	/*
 	 * After a successful VMRESUME/VMLAUNCH, control flow "magically"
 	 * resumes below at 'vmx_vmexit' due to the VMCS HOST_RIP setting.
 	 * So this isn't a typical function and objtool needs to be told to
 	 * save the unwind state here and restore it below.
 	 */
 	UNWIND_HINT_SAVE

 /*
  * If VMRESUME/VMLAUNCH and corresponding vmexit succeed, execution resumes at
  * the 'vmx_vmexit' label below.
  */
 .Lvmresume:
 	vmresume
 	jmp .Lvmfail

 .Lvmlaunch:
 	vmlaunch
 	jmp .Lvmfail

 	_ASM_EXTABLE(.Lvmresume, .Lfixup)
 	_ASM_EXTABLE(.Lvmlaunch, .Lfixup)

 SYM_INNER_LABEL_ALIGN(vmx_vmexit, SYM_L_GLOBAL)

 	/* Restore unwind state from before the VMRESUME/VMLAUNCH. */
 	UNWIND_HINT_RESTORE
 	ENDBR

 	/* Temporarily save guest's RAX. */
 	push %_ASM_AX

 	/* Reload @regs to RAX. */
 	mov WORD_SIZE(%_ASM_SP), %_ASM_AX

 	/* Save all guest registers, including RAX from the stack */
 	pop           VCPU_RAX(%_ASM_AX)
 	mov %_ASM_CX, VCPU_RCX(%_ASM_AX)
 	mov %_ASM_DX, VCPU_RDX(%_ASM_AX)
 	mov %_ASM_BX, VCPU_RBX(%_ASM_AX)
 	mov %_ASM_BP, VCPU_RBP(%_ASM_AX)
 	mov %_ASM_SI, VCPU_RSI(%_ASM_AX)
 	mov %_ASM_DI, VCPU_RDI(%_ASM_AX)
 #ifdef CONFIG_X86_64
 	mov %r8,  VCPU_R8 (%_ASM_AX)
 	mov %r9,  VCPU_R9 (%_ASM_AX)
 	mov %r10, VCPU_R10(%_ASM_AX)
 	mov %r11, VCPU_R11(%_ASM_AX)
 	mov %r12, VCPU_R12(%_ASM_AX)
 	mov %r13, VCPU_R13(%_ASM_AX)
 	mov %r14, VCPU_R14(%_ASM_AX)
 	mov %r15, VCPU_R15(%_ASM_AX)
 #endif

 	/* Clear return value to indicate VM-Exit (as opposed to VM-Fail). */
 	xor %ebx, %ebx

 .Lclear_regs:
 	/* Discard @regs.  The register is irrelevant, it just can't be RBX. */
 	pop %_ASM_AX

 	/*
 	 * Clear all general purpose registers except RSP and RBX to prevent
 	 * speculative use of the guest's values, even those that are reloaded
 	 * via the stack.  In theory, an L1 cache miss when restoring registers
 	 * could lead to speculative execution with the guest's values.
 	 * Zeroing XORs are dirt cheap, i.e. the extra paranoia is essentially
 	 * free.  RSP and RBX are exempt as RSP is restored by hardware during
 	 * VM-Exit and RBX is explicitly loaded with 0 or 1 to hold the return
 	 * value.
 	 */
 	xor %eax, %eax
 	xor %ecx, %ecx
 	xor %edx, %edx
 	xor %ebp, %ebp
 	xor %esi, %esi
 	xor %edi, %edi
 #ifdef CONFIG_X86_64
 	xor %r8d,  %r8d
 	xor %r9d,  %r9d
 	xor %r10d, %r10d
 	xor %r11d, %r11d
 	xor %r12d, %r12d
 	xor %r13d, %r13d
 	xor %r14d, %r14d
 	xor %r15d, %r15d
 #endif

 	/*
 	 * IMPORTANT: RSB filling and SPEC_CTRL handling must be done before
 	 * the first unbalanced RET after vmexit!
 	 *
 	 * For retpoline or IBRS, RSB filling is needed to prevent poisoned RSB
 	 * entries and (in some cases) RSB underflow.
 	 *
 	 * eIBRS has its own protection against poisoned RSB, so it doesn't
 	 * need the RSB filling sequence.  But it does need to be enabled, and a
 	 * single call to retire, before the first unbalanced RET.
 	 */

 	FILL_RETURN_BUFFER %_ASM_CX, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_VMEXIT,\
 			   X86_FEATURE_RSB_VMEXIT_LITE

 	pop %_ASM_ARG2	/* @flags */
 	pop %_ASM_ARG1	/* @vmx */

 	call vmx_spec_ctrl_restore_host

 	CLEAR_BRANCH_HISTORY_VMEXIT

 	/* Put return value in AX */
 	mov %_ASM_BX, %_ASM_AX

 	pop %_ASM_BX
 #ifdef CONFIG_X86_64
 	pop %r12
 	pop %r13
 	pop %r14
 	pop %r15
 #else
 	pop %esi
 	pop %edi
 #endif
 	pop %_ASM_BP
 	RET

 .Lfixup:
 	cmpb $0, _ASM_RIP(kvm_rebooting)
 	jne .Lvmfail
 	ud2
 .Lvmfail:
 	/* VM-Fail: set return value to 1 */
 	mov $1, %_ASM_BX
 	jmp .Lclear_regs

 SYM_FUNC_END(__vmx_vcpu_run)

 SYM_FUNC_START(vmx_do_nmi_irqoff)
 	VMX_DO_EVENT_IRQOFF call asm_exc_nmi_kvm_vmx
 SYM_FUNC_END(vmx_do_nmi_irqoff)

 #ifndef CONFIG_CC_HAS_ASM_GOTO_OUTPUT

 /**
  * vmread_error_trampoline - Trampoline from inline asm to vmread_error()
  * @field:	VMCS field encoding that failed
  * @fault:	%true if the VMREAD faulted, %false if it failed
  *
  * Save and restore volatile registers across a call to vmread_error().  Note,
  * all parameters are passed on the stack.
  */
 SYM_FUNC_START(vmread_error_trampoline)
 	push %_ASM_BP
 	mov  %_ASM_SP, %_ASM_BP

 	push %_ASM_AX
 	push %_ASM_CX
 	push %_ASM_DX
 #ifdef CONFIG_X86_64
 	push %rdi
 	push %rsi
 	push %r8
 	push %r9
 	push %r10
 	push %r11
 #endif

 	/* Load @field and @fault to arg1 and arg2 respectively. */
 	mov 3*WORD_SIZE(%_ASM_BP), %_ASM_ARG2
 	mov 2*WORD_SIZE(%_ASM_BP), %_ASM_ARG1

 	call vmread_error_trampoline2

 	/* Zero out @fault, which will be popped into the result register. */
 	_ASM_MOV $0, 3*WORD_SIZE(%_ASM_BP)

 #ifdef CONFIG_X86_64
 	pop %r11
 	pop %r10
 	pop %r9
 	pop %r8
 	pop %rsi
 	pop %rdi
 #endif
 	pop %_ASM_DX
 	pop %_ASM_CX
 	pop %_ASM_AX
 	pop %_ASM_BP

 	RET
 SYM_FUNC_END(vmread_error_trampoline)
 #endif

 .section .text, "ax"

 SYM_FUNC_START(vmx_do_interrupt_irqoff)
 	VMX_DO_EVENT_IRQOFF CALL_NOSPEC _ASM_ARG1
 SYM_FUNC_END(vmx_do_interrupt_irqoff)
	/* SPDX-License-Identifier: GPL-2.0 */
	#include <linux/linkage.h>
	#include <asm/asm.h>
	#include <asm/bitsperlong.h>
	#include <asm/kvm_vcpu_regs.h>
	#include <asm/nospec-branch.h>
	#include <asm/percpu.h>
	#include <asm/segment.h>
	#include "kvm-asm-offsets.h"
	#include "run_flags.h"

	#define WORD_SIZE (BITS_PER_LONG / 8)

	#define VCPU_RAX __VCPU_REGS_RAX * WORD_SIZE
	#define VCPU_RCX __VCPU_REGS_RCX * WORD_SIZE
	#define VCPU_RDX __VCPU_REGS_RDX * WORD_SIZE
	#define VCPU_RBX __VCPU_REGS_RBX * WORD_SIZE
	/* Intentionally omit RSP as it's context switched by hardware */
	#define VCPU_RBP __VCPU_REGS_RBP * WORD_SIZE
	#define VCPU_RSI __VCPU_REGS_RSI * WORD_SIZE
	#define VCPU_RDI __VCPU_REGS_RDI * WORD_SIZE

	#ifdef CONFIG_X86_64
	#define VCPU_R8 __VCPU_REGS_R8 * WORD_SIZE
	#define VCPU_R9 __VCPU_REGS_R9 * WORD_SIZE
	#define VCPU_R10 __VCPU_REGS_R10 * WORD_SIZE
	#define VCPU_R11 __VCPU_REGS_R11 * WORD_SIZE
	#define VCPU_R12 __VCPU_REGS_R12 * WORD_SIZE
	#define VCPU_R13 __VCPU_REGS_R13 * WORD_SIZE
	#define VCPU_R14 __VCPU_REGS_R14 * WORD_SIZE
	#define VCPU_R15 __VCPU_REGS_R15 * WORD_SIZE
	#endif

	.macro VMX_DO_EVENT_IRQOFF call_insn call_target
	/*
	* Unconditionally create a stack frame, getting the correct RSP on the
	* stack (for x86-64) would take two instructions anyways, and RBP can
	* be used to restore RSP to make objtool happy (see below).
	*/
	push %_ASM_BP
	mov %_ASM_SP, %_ASM_BP

	#ifdef CONFIG_X86_64
	/*
	* Align RSP to a 16-byte boundary (to emulate CPU behavior) before
	* creating the synthetic interrupt stack frame for the IRQ/NMI.
	*/
	and $-16, %rsp
	push $__KERNEL_DS
	push %rbp
	#endif
	pushf
	push $__KERNEL_CS
	\call_insn \call_target

	/*
	* "Restore" RSP from RBP, even though IRET has already unwound RSP to
	* the correct value. objtool doesn't know the callee will IRET and,
	* without the explicit restore, thinks the stack is getting walloped.
	* Using an unwind hint is problematic due to x86-64's dynamic alignment.
	*/
	mov %_ASM_BP, %_ASM_SP
	pop %_ASM_BP
	RET
	.endm

	.section .noinstr.text, "ax"

	/**
	* __vmx_vcpu_run - Run a vCPU via a transition to VMX guest mode
	* @vmx: struct vcpu_vmx *
	* @regs: unsigned long * (to guest registers)
	* @flags: VMX_RUN_VMRESUME: use VMRESUME instead of VMLAUNCH
	* VMX_RUN_SAVE_SPEC_CTRL: save guest SPEC_CTRL into vmx->spec_ctrl
	*
	* Returns:
	* 0 on VM-Exit, 1 on VM-Fail
	*/
	SYM_FUNC_START(__vmx_vcpu_run)
	push %_ASM_BP
	mov %_ASM_SP, %_ASM_BP
	#ifdef CONFIG_X86_64
	push %r15
	push %r14
	push %r13
	push %r12
	#else
	push %edi
	push %esi
	#endif
	push %_ASM_BX

	/* Save @vmx for SPEC_CTRL handling */
	push %_ASM_ARG1

	/* Save @flags for SPEC_CTRL handling */
	push %_ASM_ARG3

	/*
	* Save @regs, _ASM_ARG2 may be modified by vmx_update_host_rsp() and
	* @regs is needed after VM-Exit to save the guest's register values.
	*/
	push %_ASM_ARG2

	/* Copy @flags to EBX, _ASM_ARG3 is volatile. */
	mov %_ASM_ARG3L, %ebx

	lea (%_ASM_SP), %_ASM_ARG2
	call vmx_update_host_rsp

	ALTERNATIVE "jmp .Lspec_ctrl_done", "", X86_FEATURE_MSR_SPEC_CTRL

	/*
	* SPEC_CTRL handling: if the guest's SPEC_CTRL value differs from the
	* host's, write the MSR.
	*
	* IMPORTANT: To avoid RSB underflow attacks and any other nastiness,
	* there must not be any returns or indirect branches between this code
	* and vmentry.
	*/
	mov 2*WORD_SIZE(%_ASM_SP), %_ASM_DI
	movl VMX_spec_ctrl(%_ASM_DI), %edi
	movl PER_CPU_VAR(x86_spec_ctrl_current), %esi
	cmp %edi, %esi
	je .Lspec_ctrl_done
	mov $MSR_IA32_SPEC_CTRL, %ecx
	xor %edx, %edx
	mov %edi, %eax
	wrmsr

	.Lspec_ctrl_done:

	/*
	* Since vmentry is serializing on affected CPUs, there's no need for
	* an LFENCE to stop speculation from skipping the wrmsr.
	*/

	/* Load @regs to RAX. */
	mov (%_ASM_SP), %_ASM_AX

	/* Check if vmlaunch or vmresume is needed */
	bt $VMX_RUN_VMRESUME_SHIFT, %ebx

	/* Load guest registers. Don't clobber flags. */
	mov VCPU_RCX(%_ASM_AX), %_ASM_CX
	mov VCPU_RDX(%_ASM_AX), %_ASM_DX
	mov VCPU_RBX(%_ASM_AX), %_ASM_BX
	mov VCPU_RBP(%_ASM_AX), %_ASM_BP
	mov VCPU_RSI(%_ASM_AX), %_ASM_SI
	mov VCPU_RDI(%_ASM_AX), %_ASM_DI
	#ifdef CONFIG_X86_64
	mov VCPU_R8 (%_ASM_AX), %r8
	mov VCPU_R9 (%_ASM_AX), %r9
	mov VCPU_R10(%_ASM_AX), %r10
	mov VCPU_R11(%_ASM_AX), %r11
	mov VCPU_R12(%_ASM_AX), %r12
	mov VCPU_R13(%_ASM_AX), %r13
	mov VCPU_R14(%_ASM_AX), %r14
	mov VCPU_R15(%_ASM_AX), %r15
	#endif
	/* Load guest RAX. This kills the @regs pointer! */
	mov VCPU_RAX(%_ASM_AX), %_ASM_AX

	/* Clobbers EFLAGS.ZF */
	CLEAR_CPU_BUFFERS

	/* Check EFLAGS.CF from the VMX_RUN_VMRESUME bit test above. */
	jnc .Lvmlaunch

	/*
	* After a successful VMRESUME/VMLAUNCH, control flow "magically"
	* resumes below at 'vmx_vmexit' due to the VMCS HOST_RIP setting.
	* So this isn't a typical function and objtool needs to be told to
	* save the unwind state here and restore it below.
	*/
	UNWIND_HINT_SAVE

	/*
	* If VMRESUME/VMLAUNCH and corresponding vmexit succeed, execution resumes at
	* the 'vmx_vmexit' label below.
	*/
	.Lvmresume:
	vmresume
	jmp .Lvmfail

	.Lvmlaunch:
	vmlaunch
	jmp .Lvmfail

	_ASM_EXTABLE(.Lvmresume, .Lfixup)
	_ASM_EXTABLE(.Lvmlaunch, .Lfixup)

	SYM_INNER_LABEL_ALIGN(vmx_vmexit, SYM_L_GLOBAL)

	/* Restore unwind state from before the VMRESUME/VMLAUNCH. */
	UNWIND_HINT_RESTORE
	ENDBR

	/* Temporarily save guest's RAX. */
	push %_ASM_AX

	/* Reload @regs to RAX. */
	mov WORD_SIZE(%_ASM_SP), %_ASM_AX

	/* Save all guest registers, including RAX from the stack */
	pop VCPU_RAX(%_ASM_AX)
	mov %_ASM_CX, VCPU_RCX(%_ASM_AX)
	mov %_ASM_DX, VCPU_RDX(%_ASM_AX)
	mov %_ASM_BX, VCPU_RBX(%_ASM_AX)
	mov %_ASM_BP, VCPU_RBP(%_ASM_AX)
	mov %_ASM_SI, VCPU_RSI(%_ASM_AX)
	mov %_ASM_DI, VCPU_RDI(%_ASM_AX)
	#ifdef CONFIG_X86_64
	mov %r8, VCPU_R8 (%_ASM_AX)
	mov %r9, VCPU_R9 (%_ASM_AX)
	mov %r10, VCPU_R10(%_ASM_AX)
	mov %r11, VCPU_R11(%_ASM_AX)
	mov %r12, VCPU_R12(%_ASM_AX)
	mov %r13, VCPU_R13(%_ASM_AX)
	mov %r14, VCPU_R14(%_ASM_AX)
	mov %r15, VCPU_R15(%_ASM_AX)
	#endif

	/* Clear return value to indicate VM-Exit (as opposed to VM-Fail). */
	xor %ebx, %ebx

	.Lclear_regs:
	/* Discard @regs. The register is irrelevant, it just can't be RBX. */
	pop %_ASM_AX

	/*
	* Clear all general purpose registers except RSP and RBX to prevent
	* speculative use of the guest's values, even those that are reloaded
	* via the stack. In theory, an L1 cache miss when restoring registers
	* could lead to speculative execution with the guest's values.
	* Zeroing XORs are dirt cheap, i.e. the extra paranoia is essentially
	* free. RSP and RBX are exempt as RSP is restored by hardware during
	* VM-Exit and RBX is explicitly loaded with 0 or 1 to hold the return
	* value.
	*/
	xor %eax, %eax
	xor %ecx, %ecx
	xor %edx, %edx
	xor %ebp, %ebp
	xor %esi, %esi
	xor %edi, %edi
	#ifdef CONFIG_X86_64
	xor %r8d, %r8d
	xor %r9d, %r9d
	xor %r10d, %r10d
	xor %r11d, %r11d
	xor %r12d, %r12d
	xor %r13d, %r13d
	xor %r14d, %r14d
	xor %r15d, %r15d
	#endif

	/*
	* IMPORTANT: RSB filling and SPEC_CTRL handling must be done before
	* the first unbalanced RET after vmexit!
	*
	* For retpoline or IBRS, RSB filling is needed to prevent poisoned RSB
	* entries and (in some cases) RSB underflow.
	*
	* eIBRS has its own protection against poisoned RSB, so it doesn't
	* need the RSB filling sequence. But it does need to be enabled, and a
	* single call to retire, before the first unbalanced RET.
	*/

	FILL_RETURN_BUFFER %_ASM_CX, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_VMEXIT,\
	X86_FEATURE_RSB_VMEXIT_LITE

	pop %_ASM_ARG2 /* @flags */
	pop %_ASM_ARG1 /* @vmx */

	call vmx_spec_ctrl_restore_host

	CLEAR_BRANCH_HISTORY_VMEXIT

	/* Put return value in AX */
	mov %_ASM_BX, %_ASM_AX

	pop %_ASM_BX
	#ifdef CONFIG_X86_64
	pop %r12
	pop %r13
	pop %r14
	pop %r15
	#else
	pop %esi
	pop %edi
	#endif
	pop %_ASM_BP
	RET

	.Lfixup:
	cmpb $0, _ASM_RIP(kvm_rebooting)
	jne .Lvmfail
	ud2
	.Lvmfail:
	/* VM-Fail: set return value to 1 */
	mov $1, %_ASM_BX
	jmp .Lclear_regs

	SYM_FUNC_END(__vmx_vcpu_run)

	SYM_FUNC_START(vmx_do_nmi_irqoff)
	VMX_DO_EVENT_IRQOFF call asm_exc_nmi_kvm_vmx
	SYM_FUNC_END(vmx_do_nmi_irqoff)

	#ifndef CONFIG_CC_HAS_ASM_GOTO_OUTPUT

	/**
	* vmread_error_trampoline - Trampoline from inline asm to vmread_error()
	* @field: VMCS field encoding that failed
	* @fault: %true if the VMREAD faulted, %false if it failed
	*
	* Save and restore volatile registers across a call to vmread_error(). Note,
	* all parameters are passed on the stack.
	*/
	SYM_FUNC_START(vmread_error_trampoline)
	push %_ASM_BP
	mov %_ASM_SP, %_ASM_BP

	push %_ASM_AX
	push %_ASM_CX
	push %_ASM_DX
	#ifdef CONFIG_X86_64
	push %rdi
	push %rsi
	push %r8
	push %r9
	push %r10
	push %r11
	#endif

	/* Load @field and @fault to arg1 and arg2 respectively. */
	mov 3*WORD_SIZE(%_ASM_BP), %_ASM_ARG2
	mov 2*WORD_SIZE(%_ASM_BP), %_ASM_ARG1

	call vmread_error_trampoline2

	/* Zero out @fault, which will be popped into the result register. */
	_ASM_MOV $0, 3*WORD_SIZE(%_ASM_BP)

	#ifdef CONFIG_X86_64
	pop %r11
	pop %r10
	pop %r9
	pop %r8
	pop %rsi
	pop %rdi
	#endif
	pop %_ASM_DX
	pop %_ASM_CX
	pop %_ASM_AX
	pop %_ASM_BP

	RET
	SYM_FUNC_END(vmread_error_trampoline)
	#endif

	.section .text, "ax"

	SYM_FUNC_START(vmx_do_interrupt_irqoff)
	VMX_DO_EVENT_IRQOFF CALL_NOSPEC _ASM_ARG1
	SYM_FUNC_END(vmx_do_interrupt_irqoff)