| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Goodix Berlin Touchscreen Driver |
| * |
| * Copyright (C) 2020 - 2021 Goodix, Inc. |
| * Copyright (C) 2023 Linaro Ltd. |
| * |
| * Based on goodix_ts_berlin driver. |
| */ |
| #include <linux/unaligned.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/spi/spi.h> |
| #include <linux/input.h> |
| |
| #include "goodix_berlin.h" |
| |
| #define GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN 1 |
| #define GOODIX_BERLIN_REGISTER_WIDTH 4 |
| #define GOODIX_BERLIN_SPI_READ_DUMMY_LEN 3 |
| #define GOODIX_BERLIN_SPI_READ_PREFIX_LEN (GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \ |
| GOODIX_BERLIN_REGISTER_WIDTH + \ |
| GOODIX_BERLIN_SPI_READ_DUMMY_LEN) |
| #define GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN (GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \ |
| GOODIX_BERLIN_REGISTER_WIDTH) |
| |
| #define GOODIX_BERLIN_SPI_WRITE_FLAG 0xF0 |
| #define GOODIX_BERLIN_SPI_READ_FLAG 0xF1 |
| |
| static int goodix_berlin_spi_read(void *context, const void *reg_buf, |
| size_t reg_size, void *val_buf, |
| size_t val_size) |
| { |
| struct spi_device *spi = context; |
| struct spi_transfer xfers; |
| struct spi_message spi_msg; |
| const u32 *reg = reg_buf; /* reg is stored as native u32 at start of buffer */ |
| int error; |
| |
| if (reg_size != GOODIX_BERLIN_REGISTER_WIDTH) |
| return -EINVAL; |
| |
| u8 *buf __free(kfree) = |
| kzalloc(GOODIX_BERLIN_SPI_READ_PREFIX_LEN + val_size, |
| GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| spi_message_init(&spi_msg); |
| memset(&xfers, 0, sizeof(xfers)); |
| |
| /* buffer format: 0xF1 + addr(4bytes) + dummy(3bytes) + data */ |
| buf[0] = GOODIX_BERLIN_SPI_READ_FLAG; |
| put_unaligned_be32(*reg, buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN); |
| memset(buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + GOODIX_BERLIN_REGISTER_WIDTH, |
| 0xff, GOODIX_BERLIN_SPI_READ_DUMMY_LEN); |
| |
| xfers.tx_buf = buf; |
| xfers.rx_buf = buf; |
| xfers.len = GOODIX_BERLIN_SPI_READ_PREFIX_LEN + val_size; |
| xfers.cs_change = 0; |
| spi_message_add_tail(&xfers, &spi_msg); |
| |
| error = spi_sync(spi, &spi_msg); |
| if (error < 0) { |
| dev_err(&spi->dev, "spi transfer error, %d", error); |
| return error; |
| } |
| |
| memcpy(val_buf, buf + GOODIX_BERLIN_SPI_READ_PREFIX_LEN, val_size); |
| return error; |
| } |
| |
| static int goodix_berlin_spi_write(void *context, const void *data, |
| size_t count) |
| { |
| unsigned int len = count - GOODIX_BERLIN_REGISTER_WIDTH; |
| struct spi_device *spi = context; |
| struct spi_transfer xfers; |
| struct spi_message spi_msg; |
| const u32 *reg = data; /* reg is stored as native u32 at start of buffer */ |
| int error; |
| |
| u8 *buf __free(kfree) = |
| kzalloc(GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN + len, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| spi_message_init(&spi_msg); |
| memset(&xfers, 0, sizeof(xfers)); |
| |
| buf[0] = GOODIX_BERLIN_SPI_WRITE_FLAG; |
| put_unaligned_be32(*reg, buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN); |
| memcpy(buf + GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN, |
| data + GOODIX_BERLIN_REGISTER_WIDTH, len); |
| |
| xfers.tx_buf = buf; |
| xfers.len = GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN + len; |
| xfers.cs_change = 0; |
| spi_message_add_tail(&xfers, &spi_msg); |
| |
| error = spi_sync(spi, &spi_msg); |
| if (error < 0) { |
| dev_err(&spi->dev, "spi transfer error, %d", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static const struct regmap_config goodix_berlin_spi_regmap_conf = { |
| .reg_bits = 32, |
| .val_bits = 8, |
| .read = goodix_berlin_spi_read, |
| .write = goodix_berlin_spi_write, |
| }; |
| |
| /* vendor & product left unassigned here, should probably be updated from fw info */ |
| static const struct input_id goodix_berlin_spi_input_id = { |
| .bustype = BUS_SPI, |
| }; |
| |
| static int goodix_berlin_spi_probe(struct spi_device *spi) |
| { |
| struct regmap_config regmap_config; |
| struct regmap *regmap; |
| size_t max_size; |
| int error = 0; |
| |
| spi->mode = SPI_MODE_0; |
| spi->bits_per_word = 8; |
| error = spi_setup(spi); |
| if (error) |
| return error; |
| |
| max_size = spi_max_transfer_size(spi); |
| |
| regmap_config = goodix_berlin_spi_regmap_conf; |
| regmap_config.max_raw_read = max_size - GOODIX_BERLIN_SPI_READ_PREFIX_LEN; |
| regmap_config.max_raw_write = max_size - GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN; |
| |
| regmap = devm_regmap_init(&spi->dev, NULL, spi, ®map_config); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| error = goodix_berlin_probe(&spi->dev, spi->irq, |
| &goodix_berlin_spi_input_id, regmap); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| static const struct spi_device_id goodix_berlin_spi_ids[] = { |
| { "gt9916" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(spi, goodix_berlin_spi_ids); |
| |
| static const struct of_device_id goodix_berlin_spi_of_match[] = { |
| { .compatible = "goodix,gt9916", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, goodix_berlin_spi_of_match); |
| |
| static struct spi_driver goodix_berlin_spi_driver = { |
| .driver = { |
| .name = "goodix-berlin-spi", |
| .of_match_table = goodix_berlin_spi_of_match, |
| .pm = pm_sleep_ptr(&goodix_berlin_pm_ops), |
| .dev_groups = goodix_berlin_groups, |
| }, |
| .probe = goodix_berlin_spi_probe, |
| .id_table = goodix_berlin_spi_ids, |
| }; |
| module_spi_driver(goodix_berlin_spi_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Goodix Berlin SPI Touchscreen driver"); |
| MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>"); |