| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2021 Broadcom. All Rights Reserved. The term |
| * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. |
| */ |
| |
| /* |
| * All common (i.e. transport-independent) SLI-4 functions are implemented |
| * in this file. |
| */ |
| #include "sli4.h" |
| |
| static struct sli4_asic_entry_t sli4_asic_table[] = { |
| { SLI4_ASIC_REV_B0, SLI4_ASIC_GEN_5}, |
| { SLI4_ASIC_REV_D0, SLI4_ASIC_GEN_5}, |
| { SLI4_ASIC_REV_A3, SLI4_ASIC_GEN_6}, |
| { SLI4_ASIC_REV_A0, SLI4_ASIC_GEN_6}, |
| { SLI4_ASIC_REV_A1, SLI4_ASIC_GEN_6}, |
| { SLI4_ASIC_REV_A3, SLI4_ASIC_GEN_6}, |
| { SLI4_ASIC_REV_A1, SLI4_ASIC_GEN_7}, |
| { SLI4_ASIC_REV_A0, SLI4_ASIC_GEN_7}, |
| }; |
| |
| /* Convert queue type enum (SLI_QTYPE_*) into a string */ |
| static char *SLI4_QNAME[] = { |
| "Event Queue", |
| "Completion Queue", |
| "Mailbox Queue", |
| "Work Queue", |
| "Receive Queue", |
| "Undefined" |
| }; |
| |
| /** |
| * sli_config_cmd_init() - Write a SLI_CONFIG command to the provided buffer. |
| * |
| * @sli4: SLI context pointer. |
| * @buf: Destination buffer for the command. |
| * @length: Length in bytes of attached command. |
| * @dma: DMA buffer for non-embedded commands. |
| * Return: Command payload buffer. |
| */ |
| static void * |
| sli_config_cmd_init(struct sli4 *sli4, void *buf, u32 length, |
| struct efc_dma *dma) |
| { |
| struct sli4_cmd_sli_config *config; |
| u32 flags; |
| |
| if (length > sizeof(config->payload.embed) && !dma) { |
| efc_log_err(sli4, "Too big for an embedded cmd with len(%d)\n", |
| length); |
| return NULL; |
| } |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| config = buf; |
| |
| config->hdr.command = SLI4_MBX_CMD_SLI_CONFIG; |
| if (!dma) { |
| flags = SLI4_SLICONF_EMB; |
| config->dw1_flags = cpu_to_le32(flags); |
| config->payload_len = cpu_to_le32(length); |
| return config->payload.embed; |
| } |
| |
| flags = SLI4_SLICONF_PMDCMD_VAL_1; |
| flags &= ~SLI4_SLICONF_EMB; |
| config->dw1_flags = cpu_to_le32(flags); |
| |
| config->payload.mem.addr.low = cpu_to_le32(lower_32_bits(dma->phys)); |
| config->payload.mem.addr.high = cpu_to_le32(upper_32_bits(dma->phys)); |
| config->payload.mem.length = |
| cpu_to_le32(dma->size & SLI4_SLICONF_PMD_LEN); |
| config->payload_len = cpu_to_le32(dma->size); |
| /* save pointer to DMA for BMBX dumping purposes */ |
| sli4->bmbx_non_emb_pmd = dma; |
| return dma->virt; |
| } |
| |
| /** |
| * sli_cmd_common_create_cq() - Write a COMMON_CREATE_CQ V2 command. |
| * |
| * @sli4: SLI context pointer. |
| * @buf: Destination buffer for the command. |
| * @qmem: DMA memory for queue. |
| * @eq_id: EQ id assosiated with this cq. |
| * Return: status -EIO/0. |
| */ |
| static int |
| sli_cmd_common_create_cq(struct sli4 *sli4, void *buf, struct efc_dma *qmem, |
| u16 eq_id) |
| { |
| struct sli4_rqst_cmn_create_cq_v2 *cqv2 = NULL; |
| u32 p; |
| uintptr_t addr; |
| u32 num_pages = 0; |
| size_t cmd_size = 0; |
| u32 page_size = 0; |
| u32 n_cqe = 0; |
| u32 dw5_flags = 0; |
| u16 dw6w1_arm = 0; |
| __le32 len; |
| |
| /* First calculate number of pages and the mailbox cmd length */ |
| n_cqe = qmem->size / SLI4_CQE_BYTES; |
| switch (n_cqe) { |
| case 256: |
| case 512: |
| case 1024: |
| case 2048: |
| page_size = SZ_4K; |
| break; |
| case 4096: |
| page_size = SZ_8K; |
| break; |
| default: |
| return -EIO; |
| } |
| num_pages = sli_page_count(qmem->size, page_size); |
| |
| cmd_size = SLI4_RQST_CMDSZ(cmn_create_cq_v2) |
| + SZ_DMAADDR * num_pages; |
| |
| cqv2 = sli_config_cmd_init(sli4, buf, cmd_size, NULL); |
| if (!cqv2) |
| return -EIO; |
| |
| len = SLI4_RQST_PYLD_LEN_VAR(cmn_create_cq_v2, SZ_DMAADDR * num_pages); |
| sli_cmd_fill_hdr(&cqv2->hdr, SLI4_CMN_CREATE_CQ, SLI4_SUBSYSTEM_COMMON, |
| CMD_V2, len); |
| cqv2->page_size = page_size / SLI_PAGE_SIZE; |
| |
| /* valid values for number of pages: 1, 2, 4, 8 (sec 4.4.3) */ |
| cqv2->num_pages = cpu_to_le16(num_pages); |
| if (!num_pages || num_pages > SLI4_CREATE_CQV2_MAX_PAGES) |
| return -EIO; |
| |
| switch (num_pages) { |
| case 1: |
| dw5_flags |= SLI4_CQ_CNT_VAL(256); |
| break; |
| case 2: |
| dw5_flags |= SLI4_CQ_CNT_VAL(512); |
| break; |
| case 4: |
| dw5_flags |= SLI4_CQ_CNT_VAL(1024); |
| break; |
| case 8: |
| dw5_flags |= SLI4_CQ_CNT_VAL(LARGE); |
| cqv2->cqe_count = cpu_to_le16(n_cqe); |
| break; |
| default: |
| efc_log_err(sli4, "num_pages %d not valid\n", num_pages); |
| return -EIO; |
| } |
| |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| dw5_flags |= SLI4_CREATE_CQV2_AUTOVALID; |
| |
| dw5_flags |= SLI4_CREATE_CQV2_EVT; |
| dw5_flags |= SLI4_CREATE_CQV2_VALID; |
| |
| cqv2->dw5_flags = cpu_to_le32(dw5_flags); |
| cqv2->dw6w1_arm = cpu_to_le16(dw6w1_arm); |
| cqv2->eq_id = cpu_to_le16(eq_id); |
| |
| for (p = 0, addr = qmem->phys; p < num_pages; p++, addr += page_size) { |
| cqv2->page_phys_addr[p].low = cpu_to_le32(lower_32_bits(addr)); |
| cqv2->page_phys_addr[p].high = cpu_to_le32(upper_32_bits(addr)); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| sli_cmd_common_create_eq(struct sli4 *sli4, void *buf, struct efc_dma *qmem) |
| { |
| struct sli4_rqst_cmn_create_eq *eq; |
| u32 p; |
| uintptr_t addr; |
| u16 num_pages; |
| u32 dw5_flags = 0; |
| u32 dw6_flags = 0, ver; |
| |
| eq = sli_config_cmd_init(sli4, buf, SLI4_CFG_PYLD_LENGTH(cmn_create_eq), |
| NULL); |
| if (!eq) |
| return -EIO; |
| |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| ver = CMD_V2; |
| else |
| ver = CMD_V0; |
| |
| sli_cmd_fill_hdr(&eq->hdr, SLI4_CMN_CREATE_EQ, SLI4_SUBSYSTEM_COMMON, |
| ver, SLI4_RQST_PYLD_LEN(cmn_create_eq)); |
| |
| /* valid values for number of pages: 1, 2, 4 (sec 4.4.3) */ |
| num_pages = qmem->size / SLI_PAGE_SIZE; |
| eq->num_pages = cpu_to_le16(num_pages); |
| |
| switch (num_pages) { |
| case 1: |
| dw5_flags |= SLI4_EQE_SIZE_4; |
| dw6_flags |= SLI4_EQ_CNT_VAL(1024); |
| break; |
| case 2: |
| dw5_flags |= SLI4_EQE_SIZE_4; |
| dw6_flags |= SLI4_EQ_CNT_VAL(2048); |
| break; |
| case 4: |
| dw5_flags |= SLI4_EQE_SIZE_4; |
| dw6_flags |= SLI4_EQ_CNT_VAL(4096); |
| break; |
| default: |
| efc_log_err(sli4, "num_pages %d not valid\n", num_pages); |
| return -EIO; |
| } |
| |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| dw5_flags |= SLI4_CREATE_EQ_AUTOVALID; |
| |
| dw5_flags |= SLI4_CREATE_EQ_VALID; |
| dw6_flags &= (~SLI4_CREATE_EQ_ARM); |
| eq->dw5_flags = cpu_to_le32(dw5_flags); |
| eq->dw6_flags = cpu_to_le32(dw6_flags); |
| eq->dw7_delaymulti = cpu_to_le32(SLI4_CREATE_EQ_DELAYMULTI); |
| |
| for (p = 0, addr = qmem->phys; p < num_pages; |
| p++, addr += SLI_PAGE_SIZE) { |
| eq->page_address[p].low = cpu_to_le32(lower_32_bits(addr)); |
| eq->page_address[p].high = cpu_to_le32(upper_32_bits(addr)); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| sli_cmd_common_create_mq_ext(struct sli4 *sli4, void *buf, struct efc_dma *qmem, |
| u16 cq_id) |
| { |
| struct sli4_rqst_cmn_create_mq_ext *mq; |
| u32 p; |
| uintptr_t addr; |
| u32 num_pages; |
| u16 dw6w1_flags = 0; |
| |
| mq = sli_config_cmd_init(sli4, buf, |
| SLI4_CFG_PYLD_LENGTH(cmn_create_mq_ext), NULL); |
| if (!mq) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&mq->hdr, SLI4_CMN_CREATE_MQ_EXT, |
| SLI4_SUBSYSTEM_COMMON, CMD_V0, |
| SLI4_RQST_PYLD_LEN(cmn_create_mq_ext)); |
| |
| /* valid values for number of pages: 1, 2, 4, 8 (sec 4.4.12) */ |
| num_pages = qmem->size / SLI_PAGE_SIZE; |
| mq->num_pages = cpu_to_le16(num_pages); |
| switch (num_pages) { |
| case 1: |
| dw6w1_flags |= SLI4_MQE_SIZE_16; |
| break; |
| case 2: |
| dw6w1_flags |= SLI4_MQE_SIZE_32; |
| break; |
| case 4: |
| dw6w1_flags |= SLI4_MQE_SIZE_64; |
| break; |
| case 8: |
| dw6w1_flags |= SLI4_MQE_SIZE_128; |
| break; |
| default: |
| efc_log_info(sli4, "num_pages %d not valid\n", num_pages); |
| return -EIO; |
| } |
| |
| mq->async_event_bitmap = cpu_to_le32(SLI4_ASYNC_EVT_FC_ALL); |
| |
| if (sli4->params.mq_create_version) { |
| mq->cq_id_v1 = cpu_to_le16(cq_id); |
| mq->hdr.dw3_version = cpu_to_le32(CMD_V1); |
| } else { |
| dw6w1_flags |= (cq_id << SLI4_CREATE_MQEXT_CQID_SHIFT); |
| } |
| mq->dw7_val = cpu_to_le32(SLI4_CREATE_MQEXT_VAL); |
| |
| mq->dw6w1_flags = cpu_to_le16(dw6w1_flags); |
| for (p = 0, addr = qmem->phys; p < num_pages; |
| p++, addr += SLI_PAGE_SIZE) { |
| mq->page_phys_addr[p].low = cpu_to_le32(lower_32_bits(addr)); |
| mq->page_phys_addr[p].high = cpu_to_le32(upper_32_bits(addr)); |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_wq_create(struct sli4 *sli4, void *buf, struct efc_dma *qmem, u16 cq_id) |
| { |
| struct sli4_rqst_wq_create *wq; |
| u32 p; |
| uintptr_t addr; |
| u32 page_size = 0; |
| u32 n_wqe = 0; |
| u16 num_pages; |
| |
| wq = sli_config_cmd_init(sli4, buf, SLI4_CFG_PYLD_LENGTH(wq_create), |
| NULL); |
| if (!wq) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&wq->hdr, SLI4_OPC_WQ_CREATE, SLI4_SUBSYSTEM_FC, |
| CMD_V1, SLI4_RQST_PYLD_LEN(wq_create)); |
| n_wqe = qmem->size / sli4->wqe_size; |
| |
| switch (qmem->size) { |
| case 4096: |
| case 8192: |
| case 16384: |
| case 32768: |
| page_size = SZ_4K; |
| break; |
| case 65536: |
| page_size = SZ_8K; |
| break; |
| case 131072: |
| page_size = SZ_16K; |
| break; |
| case 262144: |
| page_size = SZ_32K; |
| break; |
| case 524288: |
| page_size = SZ_64K; |
| break; |
| default: |
| return -EIO; |
| } |
| |
| /* valid values for number of pages(num_pages): 1-8 */ |
| num_pages = sli_page_count(qmem->size, page_size); |
| wq->num_pages = cpu_to_le16(num_pages); |
| if (!num_pages || num_pages > SLI4_WQ_CREATE_MAX_PAGES) |
| return -EIO; |
| |
| wq->cq_id = cpu_to_le16(cq_id); |
| |
| wq->page_size = page_size / SLI_PAGE_SIZE; |
| |
| if (sli4->wqe_size == SLI4_WQE_EXT_BYTES) |
| wq->wqe_size_byte |= SLI4_WQE_EXT_SIZE; |
| else |
| wq->wqe_size_byte |= SLI4_WQE_SIZE; |
| |
| wq->wqe_count = cpu_to_le16(n_wqe); |
| |
| for (p = 0, addr = qmem->phys; p < num_pages; p++, addr += page_size) { |
| wq->page_phys_addr[p].low = cpu_to_le32(lower_32_bits(addr)); |
| wq->page_phys_addr[p].high = cpu_to_le32(upper_32_bits(addr)); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| sli_cmd_rq_create_v1(struct sli4 *sli4, void *buf, struct efc_dma *qmem, |
| u16 cq_id, u16 buffer_size) |
| { |
| struct sli4_rqst_rq_create_v1 *rq; |
| u32 p; |
| uintptr_t addr; |
| u32 num_pages; |
| |
| rq = sli_config_cmd_init(sli4, buf, SLI4_CFG_PYLD_LENGTH(rq_create_v1), |
| NULL); |
| if (!rq) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&rq->hdr, SLI4_OPC_RQ_CREATE, SLI4_SUBSYSTEM_FC, |
| CMD_V1, SLI4_RQST_PYLD_LEN(rq_create_v1)); |
| /* Disable "no buffer warnings" to avoid Lancer bug */ |
| rq->dim_dfd_dnb |= SLI4_RQ_CREATE_V1_DNB; |
| |
| /* valid values for number of pages: 1-8 (sec 4.5.6) */ |
| num_pages = sli_page_count(qmem->size, SLI_PAGE_SIZE); |
| rq->num_pages = cpu_to_le16(num_pages); |
| if (!num_pages || |
| num_pages > SLI4_RQ_CREATE_V1_MAX_PAGES) { |
| efc_log_info(sli4, "num_pages %d not valid, max %d\n", |
| num_pages, SLI4_RQ_CREATE_V1_MAX_PAGES); |
| return -EIO; |
| } |
| |
| /* |
| * RQE count is the total number of entries (note not lg2(# entries)) |
| */ |
| rq->rqe_count = cpu_to_le16(qmem->size / SLI4_RQE_SIZE); |
| |
| rq->rqe_size_byte |= SLI4_RQE_SIZE_8; |
| |
| rq->page_size = SLI4_RQ_PAGE_SIZE_4096; |
| |
| if (buffer_size < sli4->rq_min_buf_size || |
| buffer_size > sli4->rq_max_buf_size) { |
| efc_log_err(sli4, "buffer_size %d out of range (%d-%d)\n", |
| buffer_size, sli4->rq_min_buf_size, |
| sli4->rq_max_buf_size); |
| return -EIO; |
| } |
| rq->buffer_size = cpu_to_le32(buffer_size); |
| |
| rq->cq_id = cpu_to_le16(cq_id); |
| |
| for (p = 0, addr = qmem->phys; |
| p < num_pages; |
| p++, addr += SLI_PAGE_SIZE) { |
| rq->page_phys_addr[p].low = cpu_to_le32(lower_32_bits(addr)); |
| rq->page_phys_addr[p].high = cpu_to_le32(upper_32_bits(addr)); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| sli_cmd_rq_create_v2(struct sli4 *sli4, u32 num_rqs, |
| struct sli4_queue *qs[], u32 base_cq_id, |
| u32 header_buffer_size, |
| u32 payload_buffer_size, struct efc_dma *dma) |
| { |
| struct sli4_rqst_rq_create_v2 *req = NULL; |
| u32 i, p, offset = 0; |
| u32 payload_size, page_count; |
| uintptr_t addr; |
| u32 num_pages; |
| __le32 len; |
| |
| page_count = sli_page_count(qs[0]->dma.size, SLI_PAGE_SIZE) * num_rqs; |
| |
| /* Payload length must accommodate both request and response */ |
| payload_size = max(SLI4_RQST_CMDSZ(rq_create_v2) + |
| SZ_DMAADDR * page_count, |
| sizeof(struct sli4_rsp_cmn_create_queue_set)); |
| |
| dma->size = payload_size; |
| dma->virt = dma_alloc_coherent(&sli4->pci->dev, dma->size, |
| &dma->phys, GFP_KERNEL); |
| if (!dma->virt) |
| return -EIO; |
| |
| memset(dma->virt, 0, payload_size); |
| |
| req = sli_config_cmd_init(sli4, sli4->bmbx.virt, payload_size, dma); |
| if (!req) |
| return -EIO; |
| |
| len = SLI4_RQST_PYLD_LEN_VAR(rq_create_v2, SZ_DMAADDR * page_count); |
| sli_cmd_fill_hdr(&req->hdr, SLI4_OPC_RQ_CREATE, SLI4_SUBSYSTEM_FC, |
| CMD_V2, len); |
| /* Fill Payload fields */ |
| req->dim_dfd_dnb |= SLI4_RQCREATEV2_DNB; |
| num_pages = sli_page_count(qs[0]->dma.size, SLI_PAGE_SIZE); |
| req->num_pages = cpu_to_le16(num_pages); |
| req->rqe_count = cpu_to_le16(qs[0]->dma.size / SLI4_RQE_SIZE); |
| req->rqe_size_byte |= SLI4_RQE_SIZE_8; |
| req->page_size = SLI4_RQ_PAGE_SIZE_4096; |
| req->rq_count = num_rqs; |
| req->base_cq_id = cpu_to_le16(base_cq_id); |
| req->hdr_buffer_size = cpu_to_le16(header_buffer_size); |
| req->payload_buffer_size = cpu_to_le16(payload_buffer_size); |
| |
| for (i = 0; i < num_rqs; i++) { |
| for (p = 0, addr = qs[i]->dma.phys; p < num_pages; |
| p++, addr += SLI_PAGE_SIZE) { |
| req->page_phys_addr[offset].low = |
| cpu_to_le32(lower_32_bits(addr)); |
| req->page_phys_addr[offset].high = |
| cpu_to_le32(upper_32_bits(addr)); |
| offset++; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void |
| __sli_queue_destroy(struct sli4 *sli4, struct sli4_queue *q) |
| { |
| if (!q->dma.size) |
| return; |
| |
| dma_free_coherent(&sli4->pci->dev, q->dma.size, |
| q->dma.virt, q->dma.phys); |
| memset(&q->dma, 0, sizeof(struct efc_dma)); |
| } |
| |
| int |
| __sli_queue_init(struct sli4 *sli4, struct sli4_queue *q, u32 qtype, |
| size_t size, u32 n_entries, u32 align) |
| { |
| if (q->dma.virt) { |
| efc_log_err(sli4, "%s failed\n", __func__); |
| return -EIO; |
| } |
| |
| memset(q, 0, sizeof(struct sli4_queue)); |
| |
| q->dma.size = size * n_entries; |
| q->dma.virt = dma_alloc_coherent(&sli4->pci->dev, q->dma.size, |
| &q->dma.phys, GFP_KERNEL); |
| if (!q->dma.virt) { |
| memset(&q->dma, 0, sizeof(struct efc_dma)); |
| efc_log_err(sli4, "%s allocation failed\n", SLI4_QNAME[qtype]); |
| return -EIO; |
| } |
| |
| memset(q->dma.virt, 0, size * n_entries); |
| |
| spin_lock_init(&q->lock); |
| |
| q->type = qtype; |
| q->size = size; |
| q->length = n_entries; |
| |
| if (q->type == SLI4_QTYPE_EQ || q->type == SLI4_QTYPE_CQ) { |
| /* For prism, phase will be flipped after |
| * a sweep through eq and cq |
| */ |
| q->phase = 1; |
| } |
| |
| /* Limit to hwf the queue size per interrupt */ |
| q->proc_limit = n_entries / 2; |
| |
| if (q->type == SLI4_QTYPE_EQ) |
| q->posted_limit = q->length / 2; |
| else |
| q->posted_limit = 64; |
| |
| return 0; |
| } |
| |
| int |
| sli_fc_rq_alloc(struct sli4 *sli4, struct sli4_queue *q, |
| u32 n_entries, u32 buffer_size, |
| struct sli4_queue *cq, bool is_hdr) |
| { |
| if (__sli_queue_init(sli4, q, SLI4_QTYPE_RQ, SLI4_RQE_SIZE, |
| n_entries, SLI_PAGE_SIZE)) |
| return -EIO; |
| |
| if (sli_cmd_rq_create_v1(sli4, sli4->bmbx.virt, &q->dma, cq->id, |
| buffer_size)) |
| goto error; |
| |
| if (__sli_create_queue(sli4, q)) |
| goto error; |
| |
| if (is_hdr && q->id & 1) { |
| efc_log_info(sli4, "bad header RQ_ID %d\n", q->id); |
| goto error; |
| } else if (!is_hdr && (q->id & 1) == 0) { |
| efc_log_info(sli4, "bad data RQ_ID %d\n", q->id); |
| goto error; |
| } |
| |
| if (is_hdr) |
| q->u.flag |= SLI4_QUEUE_FLAG_HDR; |
| else |
| q->u.flag &= ~SLI4_QUEUE_FLAG_HDR; |
| |
| return 0; |
| |
| error: |
| __sli_queue_destroy(sli4, q); |
| return -EIO; |
| } |
| |
| int |
| sli_fc_rq_set_alloc(struct sli4 *sli4, u32 num_rq_pairs, |
| struct sli4_queue *qs[], u32 base_cq_id, |
| u32 n_entries, u32 header_buffer_size, |
| u32 payload_buffer_size) |
| { |
| u32 i; |
| struct efc_dma dma = {0}; |
| struct sli4_rsp_cmn_create_queue_set *rsp = NULL; |
| void __iomem *db_regaddr = NULL; |
| u32 num_rqs = num_rq_pairs * 2; |
| |
| for (i = 0; i < num_rqs; i++) { |
| if (__sli_queue_init(sli4, qs[i], SLI4_QTYPE_RQ, |
| SLI4_RQE_SIZE, n_entries, |
| SLI_PAGE_SIZE)) { |
| goto error; |
| } |
| } |
| |
| if (sli_cmd_rq_create_v2(sli4, num_rqs, qs, base_cq_id, |
| header_buffer_size, payload_buffer_size, |
| &dma)) { |
| goto error; |
| } |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_err(sli4, "bootstrap mailbox write failed RQSet\n"); |
| goto error; |
| } |
| |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| db_regaddr = sli4->reg[1] + SLI4_IF6_RQ_DB_REG; |
| else |
| db_regaddr = sli4->reg[0] + SLI4_RQ_DB_REG; |
| |
| rsp = dma.virt; |
| if (rsp->hdr.status) { |
| efc_log_err(sli4, "bad create RQSet status=%#x addl=%#x\n", |
| rsp->hdr.status, rsp->hdr.additional_status); |
| goto error; |
| } |
| |
| for (i = 0; i < num_rqs; i++) { |
| qs[i]->id = i + le16_to_cpu(rsp->q_id); |
| if ((qs[i]->id & 1) == 0) |
| qs[i]->u.flag |= SLI4_QUEUE_FLAG_HDR; |
| else |
| qs[i]->u.flag &= ~SLI4_QUEUE_FLAG_HDR; |
| |
| qs[i]->db_regaddr = db_regaddr; |
| } |
| |
| dma_free_coherent(&sli4->pci->dev, dma.size, dma.virt, dma.phys); |
| |
| return 0; |
| |
| error: |
| for (i = 0; i < num_rqs; i++) |
| __sli_queue_destroy(sli4, qs[i]); |
| |
| if (dma.virt) |
| dma_free_coherent(&sli4->pci->dev, dma.size, dma.virt, |
| dma.phys); |
| |
| return -EIO; |
| } |
| |
| static int |
| sli_res_sli_config(struct sli4 *sli4, void *buf) |
| { |
| struct sli4_cmd_sli_config *sli_config = buf; |
| |
| /* sanity check */ |
| if (!buf || sli_config->hdr.command != |
| SLI4_MBX_CMD_SLI_CONFIG) { |
| efc_log_err(sli4, "bad parameter buf=%p cmd=%#x\n", buf, |
| buf ? sli_config->hdr.command : -1); |
| return -EIO; |
| } |
| |
| if (le16_to_cpu(sli_config->hdr.status)) |
| return le16_to_cpu(sli_config->hdr.status); |
| |
| if (le32_to_cpu(sli_config->dw1_flags) & SLI4_SLICONF_EMB) |
| return sli_config->payload.embed[4]; |
| |
| efc_log_info(sli4, "external buffers not supported\n"); |
| return -EIO; |
| } |
| |
| int |
| __sli_create_queue(struct sli4 *sli4, struct sli4_queue *q) |
| { |
| struct sli4_rsp_cmn_create_queue *res_q = NULL; |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "bootstrap mailbox write fail %s\n", |
| SLI4_QNAME[q->type]); |
| return -EIO; |
| } |
| if (sli_res_sli_config(sli4, sli4->bmbx.virt)) { |
| efc_log_err(sli4, "bad status create %s\n", |
| SLI4_QNAME[q->type]); |
| return -EIO; |
| } |
| res_q = (void *)((u8 *)sli4->bmbx.virt + |
| offsetof(struct sli4_cmd_sli_config, payload)); |
| |
| if (res_q->hdr.status) { |
| efc_log_err(sli4, "bad create %s status=%#x addl=%#x\n", |
| SLI4_QNAME[q->type], res_q->hdr.status, |
| res_q->hdr.additional_status); |
| return -EIO; |
| } |
| q->id = le16_to_cpu(res_q->q_id); |
| switch (q->type) { |
| case SLI4_QTYPE_EQ: |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| q->db_regaddr = sli4->reg[1] + SLI4_IF6_EQ_DB_REG; |
| else |
| q->db_regaddr = sli4->reg[0] + SLI4_EQCQ_DB_REG; |
| break; |
| case SLI4_QTYPE_CQ: |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| q->db_regaddr = sli4->reg[1] + SLI4_IF6_CQ_DB_REG; |
| else |
| q->db_regaddr = sli4->reg[0] + SLI4_EQCQ_DB_REG; |
| break; |
| case SLI4_QTYPE_MQ: |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| q->db_regaddr = sli4->reg[1] + SLI4_IF6_MQ_DB_REG; |
| else |
| q->db_regaddr = sli4->reg[0] + SLI4_MQ_DB_REG; |
| break; |
| case SLI4_QTYPE_RQ: |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| q->db_regaddr = sli4->reg[1] + SLI4_IF6_RQ_DB_REG; |
| else |
| q->db_regaddr = sli4->reg[0] + SLI4_RQ_DB_REG; |
| break; |
| case SLI4_QTYPE_WQ: |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| q->db_regaddr = sli4->reg[1] + SLI4_IF6_WQ_DB_REG; |
| else |
| q->db_regaddr = sli4->reg[0] + SLI4_IO_WQ_DB_REG; |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_get_queue_entry_size(struct sli4 *sli4, u32 qtype) |
| { |
| u32 size = 0; |
| |
| switch (qtype) { |
| case SLI4_QTYPE_EQ: |
| size = sizeof(u32); |
| break; |
| case SLI4_QTYPE_CQ: |
| size = 16; |
| break; |
| case SLI4_QTYPE_MQ: |
| size = 256; |
| break; |
| case SLI4_QTYPE_WQ: |
| size = sli4->wqe_size; |
| break; |
| case SLI4_QTYPE_RQ: |
| size = SLI4_RQE_SIZE; |
| break; |
| default: |
| efc_log_info(sli4, "unknown queue type %d\n", qtype); |
| return -1; |
| } |
| return size; |
| } |
| |
| int |
| sli_queue_alloc(struct sli4 *sli4, u32 qtype, |
| struct sli4_queue *q, u32 n_entries, |
| struct sli4_queue *assoc) |
| { |
| int size; |
| u32 align = 0; |
| |
| /* get queue size */ |
| size = sli_get_queue_entry_size(sli4, qtype); |
| if (size < 0) |
| return -EIO; |
| align = SLI_PAGE_SIZE; |
| |
| if (__sli_queue_init(sli4, q, qtype, size, n_entries, align)) |
| return -EIO; |
| |
| switch (qtype) { |
| case SLI4_QTYPE_EQ: |
| if (!sli_cmd_common_create_eq(sli4, sli4->bmbx.virt, &q->dma) && |
| !__sli_create_queue(sli4, q)) |
| return 0; |
| |
| break; |
| case SLI4_QTYPE_CQ: |
| if (!sli_cmd_common_create_cq(sli4, sli4->bmbx.virt, &q->dma, |
| assoc ? assoc->id : 0) && |
| !__sli_create_queue(sli4, q)) |
| return 0; |
| |
| break; |
| case SLI4_QTYPE_MQ: |
| assoc->u.flag |= SLI4_QUEUE_FLAG_MQ; |
| if (!sli_cmd_common_create_mq_ext(sli4, sli4->bmbx.virt, |
| &q->dma, assoc->id) && |
| !__sli_create_queue(sli4, q)) |
| return 0; |
| |
| break; |
| case SLI4_QTYPE_WQ: |
| if (!sli_cmd_wq_create(sli4, sli4->bmbx.virt, &q->dma, |
| assoc ? assoc->id : 0) && |
| !__sli_create_queue(sli4, q)) |
| return 0; |
| |
| break; |
| default: |
| efc_log_info(sli4, "unknown queue type %d\n", qtype); |
| } |
| |
| __sli_queue_destroy(sli4, q); |
| return -EIO; |
| } |
| |
| static int sli_cmd_cq_set_create(struct sli4 *sli4, |
| struct sli4_queue *qs[], u32 num_cqs, |
| struct sli4_queue *eqs[], |
| struct efc_dma *dma) |
| { |
| struct sli4_rqst_cmn_create_cq_set_v0 *req = NULL; |
| uintptr_t addr; |
| u32 i, offset = 0, page_bytes = 0, payload_size; |
| u32 p = 0, page_size = 0, n_cqe = 0, num_pages_cq; |
| u32 dw5_flags = 0; |
| u16 dw6w1_flags = 0; |
| __le32 req_len; |
| |
| n_cqe = qs[0]->dma.size / SLI4_CQE_BYTES; |
| switch (n_cqe) { |
| case 256: |
| case 512: |
| case 1024: |
| case 2048: |
| page_size = 1; |
| break; |
| case 4096: |
| page_size = 2; |
| break; |
| default: |
| return -EIO; |
| } |
| |
| page_bytes = page_size * SLI_PAGE_SIZE; |
| num_pages_cq = sli_page_count(qs[0]->dma.size, page_bytes); |
| payload_size = max(SLI4_RQST_CMDSZ(cmn_create_cq_set_v0) + |
| (SZ_DMAADDR * num_pages_cq * num_cqs), |
| sizeof(struct sli4_rsp_cmn_create_queue_set)); |
| |
| dma->size = payload_size; |
| dma->virt = dma_alloc_coherent(&sli4->pci->dev, dma->size, |
| &dma->phys, GFP_KERNEL); |
| if (!dma->virt) |
| return -EIO; |
| |
| memset(dma->virt, 0, payload_size); |
| |
| req = sli_config_cmd_init(sli4, sli4->bmbx.virt, payload_size, dma); |
| if (!req) |
| return -EIO; |
| |
| req_len = SLI4_RQST_PYLD_LEN_VAR(cmn_create_cq_set_v0, |
| SZ_DMAADDR * num_pages_cq * num_cqs); |
| sli_cmd_fill_hdr(&req->hdr, SLI4_CMN_CREATE_CQ_SET, SLI4_SUBSYSTEM_FC, |
| CMD_V0, req_len); |
| req->page_size = page_size; |
| |
| req->num_pages = cpu_to_le16(num_pages_cq); |
| switch (num_pages_cq) { |
| case 1: |
| dw5_flags |= SLI4_CQ_CNT_VAL(256); |
| break; |
| case 2: |
| dw5_flags |= SLI4_CQ_CNT_VAL(512); |
| break; |
| case 4: |
| dw5_flags |= SLI4_CQ_CNT_VAL(1024); |
| break; |
| case 8: |
| dw5_flags |= SLI4_CQ_CNT_VAL(LARGE); |
| dw6w1_flags |= (n_cqe & SLI4_CREATE_CQSETV0_CQE_COUNT); |
| break; |
| default: |
| efc_log_info(sli4, "num_pages %d not valid\n", num_pages_cq); |
| return -EIO; |
| } |
| |
| dw5_flags |= SLI4_CREATE_CQSETV0_EVT; |
| dw5_flags |= SLI4_CREATE_CQSETV0_VALID; |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| dw5_flags |= SLI4_CREATE_CQSETV0_AUTOVALID; |
| |
| dw6w1_flags &= ~SLI4_CREATE_CQSETV0_ARM; |
| |
| req->dw5_flags = cpu_to_le32(dw5_flags); |
| req->dw6w1_flags = cpu_to_le16(dw6w1_flags); |
| |
| req->num_cq_req = cpu_to_le16(num_cqs); |
| |
| /* Fill page addresses of all the CQs. */ |
| for (i = 0; i < num_cqs; i++) { |
| req->eq_id[i] = cpu_to_le16(eqs[i]->id); |
| for (p = 0, addr = qs[i]->dma.phys; p < num_pages_cq; |
| p++, addr += page_bytes) { |
| req->page_phys_addr[offset].low = |
| cpu_to_le32(lower_32_bits(addr)); |
| req->page_phys_addr[offset].high = |
| cpu_to_le32(upper_32_bits(addr)); |
| offset++; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_cq_alloc_set(struct sli4 *sli4, struct sli4_queue *qs[], |
| u32 num_cqs, u32 n_entries, struct sli4_queue *eqs[]) |
| { |
| u32 i; |
| struct efc_dma dma = {0}; |
| struct sli4_rsp_cmn_create_queue_set *res; |
| void __iomem *db_regaddr; |
| |
| /* Align the queue DMA memory */ |
| for (i = 0; i < num_cqs; i++) { |
| if (__sli_queue_init(sli4, qs[i], SLI4_QTYPE_CQ, SLI4_CQE_BYTES, |
| n_entries, SLI_PAGE_SIZE)) |
| goto error; |
| } |
| |
| if (sli_cmd_cq_set_create(sli4, qs, num_cqs, eqs, &dma)) |
| goto error; |
| |
| if (sli_bmbx_command(sli4)) |
| goto error; |
| |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| db_regaddr = sli4->reg[1] + SLI4_IF6_CQ_DB_REG; |
| else |
| db_regaddr = sli4->reg[0] + SLI4_EQCQ_DB_REG; |
| |
| res = dma.virt; |
| if (res->hdr.status) { |
| efc_log_err(sli4, "bad create CQSet status=%#x addl=%#x\n", |
| res->hdr.status, res->hdr.additional_status); |
| goto error; |
| } |
| |
| /* Check if we got all requested CQs. */ |
| if (le16_to_cpu(res->num_q_allocated) != num_cqs) { |
| efc_log_crit(sli4, "Requested count CQs doesn't match.\n"); |
| goto error; |
| } |
| /* Fill the resp cq ids. */ |
| for (i = 0; i < num_cqs; i++) { |
| qs[i]->id = le16_to_cpu(res->q_id) + i; |
| qs[i]->db_regaddr = db_regaddr; |
| } |
| |
| dma_free_coherent(&sli4->pci->dev, dma.size, dma.virt, dma.phys); |
| |
| return 0; |
| |
| error: |
| for (i = 0; i < num_cqs; i++) |
| __sli_queue_destroy(sli4, qs[i]); |
| |
| if (dma.virt) |
| dma_free_coherent(&sli4->pci->dev, dma.size, dma.virt, |
| dma.phys); |
| |
| return -EIO; |
| } |
| |
| static int |
| sli_cmd_common_destroy_q(struct sli4 *sli4, u8 opc, u8 subsystem, u16 q_id) |
| { |
| struct sli4_rqst_cmn_destroy_q *req; |
| |
| /* Payload length must accommodate both request and response */ |
| req = sli_config_cmd_init(sli4, sli4->bmbx.virt, |
| SLI4_CFG_PYLD_LENGTH(cmn_destroy_q), NULL); |
| if (!req) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&req->hdr, opc, subsystem, |
| CMD_V0, SLI4_RQST_PYLD_LEN(cmn_destroy_q)); |
| req->q_id = cpu_to_le16(q_id); |
| |
| return 0; |
| } |
| |
| int |
| sli_queue_free(struct sli4 *sli4, struct sli4_queue *q, |
| u32 destroy_queues, u32 free_memory) |
| { |
| int rc = 0; |
| u8 opcode, subsystem; |
| struct sli4_rsp_hdr *res; |
| |
| if (!q) { |
| efc_log_err(sli4, "bad parameter sli4=%p q=%p\n", sli4, q); |
| return -EIO; |
| } |
| |
| if (!destroy_queues) |
| goto free_mem; |
| |
| switch (q->type) { |
| case SLI4_QTYPE_EQ: |
| opcode = SLI4_CMN_DESTROY_EQ; |
| subsystem = SLI4_SUBSYSTEM_COMMON; |
| break; |
| case SLI4_QTYPE_CQ: |
| opcode = SLI4_CMN_DESTROY_CQ; |
| subsystem = SLI4_SUBSYSTEM_COMMON; |
| break; |
| case SLI4_QTYPE_MQ: |
| opcode = SLI4_CMN_DESTROY_MQ; |
| subsystem = SLI4_SUBSYSTEM_COMMON; |
| break; |
| case SLI4_QTYPE_WQ: |
| opcode = SLI4_OPC_WQ_DESTROY; |
| subsystem = SLI4_SUBSYSTEM_FC; |
| break; |
| case SLI4_QTYPE_RQ: |
| opcode = SLI4_OPC_RQ_DESTROY; |
| subsystem = SLI4_SUBSYSTEM_FC; |
| break; |
| default: |
| efc_log_info(sli4, "bad queue type %d\n", q->type); |
| rc = -EIO; |
| goto free_mem; |
| } |
| |
| rc = sli_cmd_common_destroy_q(sli4, opcode, subsystem, q->id); |
| if (rc) |
| goto free_mem; |
| |
| rc = sli_bmbx_command(sli4); |
| if (rc) |
| goto free_mem; |
| |
| rc = sli_res_sli_config(sli4, sli4->bmbx.virt); |
| if (rc) |
| goto free_mem; |
| |
| res = (void *)((u8 *)sli4->bmbx.virt + |
| offsetof(struct sli4_cmd_sli_config, payload)); |
| if (res->status) { |
| efc_log_err(sli4, "destroy %s st=%#x addl=%#x\n", |
| SLI4_QNAME[q->type], res->status, |
| res->additional_status); |
| rc = -EIO; |
| goto free_mem; |
| } |
| |
| free_mem: |
| if (free_memory) |
| __sli_queue_destroy(sli4, q); |
| |
| return rc; |
| } |
| |
| int |
| sli_queue_eq_arm(struct sli4 *sli4, struct sli4_queue *q, bool arm) |
| { |
| u32 val; |
| unsigned long flags = 0; |
| u32 a = arm ? SLI4_EQCQ_ARM : SLI4_EQCQ_UNARM; |
| |
| spin_lock_irqsave(&q->lock, flags); |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| val = sli_format_if6_eq_db_data(q->n_posted, q->id, a); |
| else |
| val = sli_format_eq_db_data(q->n_posted, q->id, a); |
| |
| writel(val, q->db_regaddr); |
| q->n_posted = 0; |
| spin_unlock_irqrestore(&q->lock, flags); |
| |
| return 0; |
| } |
| |
| int |
| sli_queue_arm(struct sli4 *sli4, struct sli4_queue *q, bool arm) |
| { |
| u32 val = 0; |
| unsigned long flags = 0; |
| u32 a = arm ? SLI4_EQCQ_ARM : SLI4_EQCQ_UNARM; |
| |
| spin_lock_irqsave(&q->lock, flags); |
| |
| switch (q->type) { |
| case SLI4_QTYPE_EQ: |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| val = sli_format_if6_eq_db_data(q->n_posted, q->id, a); |
| else |
| val = sli_format_eq_db_data(q->n_posted, q->id, a); |
| |
| writel(val, q->db_regaddr); |
| q->n_posted = 0; |
| break; |
| case SLI4_QTYPE_CQ: |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6) |
| val = sli_format_if6_cq_db_data(q->n_posted, q->id, a); |
| else |
| val = sli_format_cq_db_data(q->n_posted, q->id, a); |
| |
| writel(val, q->db_regaddr); |
| q->n_posted = 0; |
| break; |
| default: |
| efc_log_info(sli4, "should only be used for EQ/CQ, not %s\n", |
| SLI4_QNAME[q->type]); |
| } |
| |
| spin_unlock_irqrestore(&q->lock, flags); |
| |
| return 0; |
| } |
| |
| int |
| sli_wq_write(struct sli4 *sli4, struct sli4_queue *q, u8 *entry) |
| { |
| u8 *qe = q->dma.virt; |
| u32 qindex; |
| u32 val = 0; |
| |
| qindex = q->index; |
| qe += q->index * q->size; |
| |
| if (sli4->params.perf_wq_id_association) |
| sli_set_wq_id_association(entry, q->id); |
| |
| memcpy(qe, entry, q->size); |
| val = sli_format_wq_db_data(q->id); |
| |
| writel(val, q->db_regaddr); |
| q->index = (q->index + 1) & (q->length - 1); |
| |
| return qindex; |
| } |
| |
| int |
| sli_mq_write(struct sli4 *sli4, struct sli4_queue *q, u8 *entry) |
| { |
| u8 *qe = q->dma.virt; |
| u32 qindex; |
| u32 val = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&q->lock, flags); |
| qindex = q->index; |
| qe += q->index * q->size; |
| |
| memcpy(qe, entry, q->size); |
| val = sli_format_mq_db_data(q->id); |
| writel(val, q->db_regaddr); |
| q->index = (q->index + 1) & (q->length - 1); |
| spin_unlock_irqrestore(&q->lock, flags); |
| |
| return qindex; |
| } |
| |
| int |
| sli_rq_write(struct sli4 *sli4, struct sli4_queue *q, u8 *entry) |
| { |
| u8 *qe = q->dma.virt; |
| u32 qindex; |
| u32 val = 0; |
| |
| qindex = q->index; |
| qe += q->index * q->size; |
| |
| memcpy(qe, entry, q->size); |
| |
| /* |
| * In RQ-pair, an RQ either contains the FC header |
| * (i.e. is_hdr == TRUE) or the payload. |
| * |
| * Don't ring doorbell for payload RQ |
| */ |
| if (!(q->u.flag & SLI4_QUEUE_FLAG_HDR)) |
| goto skip; |
| |
| val = sli_format_rq_db_data(q->id); |
| writel(val, q->db_regaddr); |
| skip: |
| q->index = (q->index + 1) & (q->length - 1); |
| |
| return qindex; |
| } |
| |
| int |
| sli_eq_read(struct sli4 *sli4, struct sli4_queue *q, u8 *entry) |
| { |
| u8 *qe = q->dma.virt; |
| unsigned long flags = 0; |
| u16 wflags = 0; |
| |
| spin_lock_irqsave(&q->lock, flags); |
| |
| qe += q->index * q->size; |
| |
| /* Check if eqe is valid */ |
| wflags = le16_to_cpu(((struct sli4_eqe *)qe)->dw0w0_flags); |
| |
| if ((wflags & SLI4_EQE_VALID) != q->phase) { |
| spin_unlock_irqrestore(&q->lock, flags); |
| return -EIO; |
| } |
| |
| if (sli4->if_type != SLI4_INTF_IF_TYPE_6) { |
| wflags &= ~SLI4_EQE_VALID; |
| ((struct sli4_eqe *)qe)->dw0w0_flags = cpu_to_le16(wflags); |
| } |
| |
| memcpy(entry, qe, q->size); |
| q->index = (q->index + 1) & (q->length - 1); |
| q->n_posted++; |
| /* |
| * For prism, the phase value will be used |
| * to check the validity of eq/cq entries. |
| * The value toggles after a complete sweep |
| * through the queue. |
| */ |
| |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6 && q->index == 0) |
| q->phase ^= (u16)0x1; |
| |
| spin_unlock_irqrestore(&q->lock, flags); |
| |
| return 0; |
| } |
| |
| int |
| sli_cq_read(struct sli4 *sli4, struct sli4_queue *q, u8 *entry) |
| { |
| u8 *qe = q->dma.virt; |
| unsigned long flags = 0; |
| u32 dwflags = 0; |
| bool valid_bit_set; |
| |
| spin_lock_irqsave(&q->lock, flags); |
| |
| qe += q->index * q->size; |
| |
| /* Check if cqe is valid */ |
| dwflags = le32_to_cpu(((struct sli4_mcqe *)qe)->dw3_flags); |
| valid_bit_set = (dwflags & SLI4_MCQE_VALID) != 0; |
| |
| if (valid_bit_set != q->phase) { |
| spin_unlock_irqrestore(&q->lock, flags); |
| return -EIO; |
| } |
| |
| if (sli4->if_type != SLI4_INTF_IF_TYPE_6) { |
| dwflags &= ~SLI4_MCQE_VALID; |
| ((struct sli4_mcqe *)qe)->dw3_flags = cpu_to_le32(dwflags); |
| } |
| |
| memcpy(entry, qe, q->size); |
| q->index = (q->index + 1) & (q->length - 1); |
| q->n_posted++; |
| /* |
| * For prism, the phase value will be used |
| * to check the validity of eq/cq entries. |
| * The value toggles after a complete sweep |
| * through the queue. |
| */ |
| |
| if (sli4->if_type == SLI4_INTF_IF_TYPE_6 && q->index == 0) |
| q->phase ^= (u16)0x1; |
| |
| spin_unlock_irqrestore(&q->lock, flags); |
| |
| return 0; |
| } |
| |
| int |
| sli_mq_read(struct sli4 *sli4, struct sli4_queue *q, u8 *entry) |
| { |
| u8 *qe = q->dma.virt; |
| unsigned long flags = 0; |
| |
| spin_lock_irqsave(&q->lock, flags); |
| |
| qe += q->u.r_idx * q->size; |
| |
| /* Check if mqe is valid */ |
| if (q->index == q->u.r_idx) { |
| spin_unlock_irqrestore(&q->lock, flags); |
| return -EIO; |
| } |
| |
| memcpy(entry, qe, q->size); |
| q->u.r_idx = (q->u.r_idx + 1) & (q->length - 1); |
| |
| spin_unlock_irqrestore(&q->lock, flags); |
| |
| return 0; |
| } |
| |
| int |
| sli_eq_parse(struct sli4 *sli4, u8 *buf, u16 *cq_id) |
| { |
| struct sli4_eqe *eqe = (void *)buf; |
| int rc = 0; |
| u16 flags = 0; |
| u16 majorcode; |
| u16 minorcode; |
| |
| if (!buf || !cq_id) { |
| efc_log_err(sli4, "bad parameters sli4=%p buf=%p cq_id=%p\n", |
| sli4, buf, cq_id); |
| return -EIO; |
| } |
| |
| flags = le16_to_cpu(eqe->dw0w0_flags); |
| majorcode = (flags & SLI4_EQE_MJCODE) >> 1; |
| minorcode = (flags & SLI4_EQE_MNCODE) >> 4; |
| switch (majorcode) { |
| case SLI4_MAJOR_CODE_STANDARD: |
| *cq_id = le16_to_cpu(eqe->resource_id); |
| break; |
| case SLI4_MAJOR_CODE_SENTINEL: |
| efc_log_info(sli4, "sentinel EQE\n"); |
| rc = SLI4_EQE_STATUS_EQ_FULL; |
| break; |
| default: |
| efc_log_info(sli4, "Unsupported EQE: major %x minor %x\n", |
| majorcode, minorcode); |
| rc = -EIO; |
| } |
| |
| return rc; |
| } |
| |
| int |
| sli_cq_parse(struct sli4 *sli4, struct sli4_queue *cq, u8 *cqe, |
| enum sli4_qentry *etype, u16 *q_id) |
| { |
| int rc = 0; |
| |
| if (!cq || !cqe || !etype) { |
| efc_log_err(sli4, "bad params sli4=%p cq=%p cqe=%p etype=%p q_id=%p\n", |
| sli4, cq, cqe, etype, q_id); |
| return -EINVAL; |
| } |
| |
| /* Parse a CQ entry to retrieve the event type and the queue id */ |
| if (cq->u.flag & SLI4_QUEUE_FLAG_MQ) { |
| struct sli4_mcqe *mcqe = (void *)cqe; |
| |
| if (le32_to_cpu(mcqe->dw3_flags) & SLI4_MCQE_AE) { |
| *etype = SLI4_QENTRY_ASYNC; |
| } else { |
| *etype = SLI4_QENTRY_MQ; |
| rc = sli_cqe_mq(sli4, mcqe); |
| } |
| *q_id = -1; |
| } else { |
| rc = sli_fc_cqe_parse(sli4, cq, cqe, etype, q_id); |
| } |
| |
| return rc; |
| } |
| |
| int |
| sli_abort_wqe(struct sli4 *sli, void *buf, enum sli4_abort_type type, |
| bool send_abts, u32 ids, u32 mask, u16 tag, u16 cq_id) |
| { |
| struct sli4_abort_wqe *abort = buf; |
| |
| memset(buf, 0, sli->wqe_size); |
| |
| switch (type) { |
| case SLI4_ABORT_XRI: |
| abort->criteria = SLI4_ABORT_CRITERIA_XRI_TAG; |
| if (mask) { |
| efc_log_warn(sli, "%#x aborting XRI %#x warning non-zero mask", |
| mask, ids); |
| mask = 0; |
| } |
| break; |
| case SLI4_ABORT_ABORT_ID: |
| abort->criteria = SLI4_ABORT_CRITERIA_ABORT_TAG; |
| break; |
| case SLI4_ABORT_REQUEST_ID: |
| abort->criteria = SLI4_ABORT_CRITERIA_REQUEST_TAG; |
| break; |
| default: |
| efc_log_info(sli, "unsupported type %#x\n", type); |
| return -EIO; |
| } |
| |
| abort->ia_ir_byte |= send_abts ? 0 : 1; |
| |
| /* Suppress ABTS retries */ |
| abort->ia_ir_byte |= SLI4_ABRT_WQE_IR; |
| |
| abort->t_mask = cpu_to_le32(mask); |
| abort->t_tag = cpu_to_le32(ids); |
| abort->command = SLI4_WQE_ABORT; |
| abort->request_tag = cpu_to_le16(tag); |
| |
| abort->dw10w0_flags = cpu_to_le16(SLI4_ABRT_WQE_QOSD); |
| |
| abort->cq_id = cpu_to_le16(cq_id); |
| abort->cmdtype_wqec_byte |= SLI4_CMD_ABORT_WQE; |
| |
| return 0; |
| } |
| |
| int |
| sli_els_request64_wqe(struct sli4 *sli, void *buf, struct efc_dma *sgl, |
| struct sli_els_params *params) |
| { |
| struct sli4_els_request64_wqe *els = buf; |
| struct sli4_sge *sge = sgl->virt; |
| bool is_fabric = false; |
| struct sli4_bde *bptr; |
| |
| memset(buf, 0, sli->wqe_size); |
| |
| bptr = &els->els_request_payload; |
| if (sli->params.sgl_pre_registered) { |
| els->qosd_xbl_hlm_iod_dbde_wqes &= ~SLI4_REQ_WQE_XBL; |
| |
| els->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_REQ_WQE_DBDE; |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (params->xmit_len & SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.data.low = sge[0].buffer_address_low; |
| bptr->u.data.high = sge[0].buffer_address_high; |
| } else { |
| els->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_REQ_WQE_XBL; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(BLP)) | |
| ((2 * sizeof(struct sli4_sge)) & |
| SLI4_BDE_LEN_MASK)); |
| bptr->u.blp.low = cpu_to_le32(lower_32_bits(sgl->phys)); |
| bptr->u.blp.high = cpu_to_le32(upper_32_bits(sgl->phys)); |
| } |
| |
| els->els_request_payload_length = cpu_to_le32(params->xmit_len); |
| els->max_response_payload_length = cpu_to_le32(params->rsp_len); |
| |
| els->xri_tag = cpu_to_le16(params->xri); |
| els->timer = params->timeout; |
| els->class_byte |= SLI4_GENERIC_CLASS_CLASS_3; |
| |
| els->command = SLI4_WQE_ELS_REQUEST64; |
| |
| els->request_tag = cpu_to_le16(params->tag); |
| |
| els->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_REQ_WQE_IOD; |
| |
| els->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_REQ_WQE_QOSD; |
| |
| /* figure out the ELS_ID value from the request buffer */ |
| |
| switch (params->cmd) { |
| case ELS_LOGO: |
| els->cmdtype_elsid_byte |= |
| SLI4_ELS_REQUEST64_LOGO << SLI4_REQ_WQE_ELSID_SHFT; |
| if (params->rpi_registered) { |
| els->ct_byte |= |
| SLI4_GENERIC_CONTEXT_RPI << SLI4_REQ_WQE_CT_SHFT; |
| els->context_tag = cpu_to_le16(params->rpi); |
| } else { |
| els->ct_byte |= |
| SLI4_GENERIC_CONTEXT_VPI << SLI4_REQ_WQE_CT_SHFT; |
| els->context_tag = cpu_to_le16(params->vpi); |
| } |
| if (params->d_id == FC_FID_FLOGI) |
| is_fabric = true; |
| break; |
| case ELS_FDISC: |
| if (params->d_id == FC_FID_FLOGI) |
| is_fabric = true; |
| if (params->s_id == 0) { |
| els->cmdtype_elsid_byte |= |
| SLI4_ELS_REQUEST64_FDISC << SLI4_REQ_WQE_ELSID_SHFT; |
| is_fabric = true; |
| } else { |
| els->cmdtype_elsid_byte |= |
| SLI4_ELS_REQUEST64_OTHER << SLI4_REQ_WQE_ELSID_SHFT; |
| } |
| els->ct_byte |= |
| SLI4_GENERIC_CONTEXT_VPI << SLI4_REQ_WQE_CT_SHFT; |
| els->context_tag = cpu_to_le16(params->vpi); |
| els->sid_sp_dword |= cpu_to_le32(1 << SLI4_REQ_WQE_SP_SHFT); |
| break; |
| case ELS_FLOGI: |
| els->ct_byte |= |
| SLI4_GENERIC_CONTEXT_VPI << SLI4_REQ_WQE_CT_SHFT; |
| els->context_tag = cpu_to_le16(params->vpi); |
| /* |
| * Set SP here ... we haven't done a REG_VPI yet |
| * need to maybe not set this when we have |
| * completed VFI/VPI registrations ... |
| * |
| * Use the FC_ID of the SPORT if it has been allocated, |
| * otherwise use an S_ID of zero. |
| */ |
| els->sid_sp_dword |= cpu_to_le32(1 << SLI4_REQ_WQE_SP_SHFT); |
| if (params->s_id != U32_MAX) |
| els->sid_sp_dword |= cpu_to_le32(params->s_id); |
| break; |
| case ELS_PLOGI: |
| els->cmdtype_elsid_byte |= |
| SLI4_ELS_REQUEST64_PLOGI << SLI4_REQ_WQE_ELSID_SHFT; |
| els->ct_byte |= |
| SLI4_GENERIC_CONTEXT_VPI << SLI4_REQ_WQE_CT_SHFT; |
| els->context_tag = cpu_to_le16(params->vpi); |
| break; |
| case ELS_SCR: |
| els->cmdtype_elsid_byte |= |
| SLI4_ELS_REQUEST64_OTHER << SLI4_REQ_WQE_ELSID_SHFT; |
| els->ct_byte |= |
| SLI4_GENERIC_CONTEXT_VPI << SLI4_REQ_WQE_CT_SHFT; |
| els->context_tag = cpu_to_le16(params->vpi); |
| break; |
| default: |
| els->cmdtype_elsid_byte |= |
| SLI4_ELS_REQUEST64_OTHER << SLI4_REQ_WQE_ELSID_SHFT; |
| if (params->rpi_registered) { |
| els->ct_byte |= (SLI4_GENERIC_CONTEXT_RPI << |
| SLI4_REQ_WQE_CT_SHFT); |
| els->context_tag = cpu_to_le16(params->vpi); |
| } else { |
| els->ct_byte |= |
| SLI4_GENERIC_CONTEXT_VPI << SLI4_REQ_WQE_CT_SHFT; |
| els->context_tag = cpu_to_le16(params->vpi); |
| } |
| break; |
| } |
| |
| if (is_fabric) |
| els->cmdtype_elsid_byte |= SLI4_ELS_REQUEST64_CMD_FABRIC; |
| else |
| els->cmdtype_elsid_byte |= SLI4_ELS_REQUEST64_CMD_NON_FABRIC; |
| |
| els->cq_id = cpu_to_le16(SLI4_CQ_DEFAULT); |
| |
| if (((els->ct_byte & SLI4_REQ_WQE_CT) >> SLI4_REQ_WQE_CT_SHFT) != |
| SLI4_GENERIC_CONTEXT_RPI) |
| els->remote_id_dword = cpu_to_le32(params->d_id); |
| |
| if (((els->ct_byte & SLI4_REQ_WQE_CT) >> SLI4_REQ_WQE_CT_SHFT) == |
| SLI4_GENERIC_CONTEXT_VPI) |
| els->temporary_rpi = cpu_to_le16(params->rpi); |
| |
| return 0; |
| } |
| |
| int |
| sli_fcp_icmnd64_wqe(struct sli4 *sli, void *buf, struct efc_dma *sgl, u16 xri, |
| u16 tag, u16 cq_id, u32 rpi, u32 rnode_fcid, u8 timeout) |
| { |
| struct sli4_fcp_icmnd64_wqe *icmnd = buf; |
| struct sli4_sge *sge = NULL; |
| struct sli4_bde *bptr; |
| u32 len; |
| |
| memset(buf, 0, sli->wqe_size); |
| |
| if (!sgl || !sgl->virt) { |
| efc_log_err(sli, "bad parameter sgl=%p virt=%p\n", |
| sgl, sgl ? sgl->virt : NULL); |
| return -EIO; |
| } |
| sge = sgl->virt; |
| bptr = &icmnd->bde; |
| if (sli->params.sgl_pre_registered) { |
| icmnd->qosd_xbl_hlm_iod_dbde_wqes &= ~SLI4_ICMD_WQE_XBL; |
| |
| icmnd->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_ICMD_WQE_DBDE; |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[0].buffer_length) & |
| SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.data.low = sge[0].buffer_address_low; |
| bptr->u.data.high = sge[0].buffer_address_high; |
| } else { |
| icmnd->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_ICMD_WQE_XBL; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(BLP)) | |
| (sgl->size & SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.blp.low = cpu_to_le32(lower_32_bits(sgl->phys)); |
| bptr->u.blp.high = cpu_to_le32(upper_32_bits(sgl->phys)); |
| } |
| |
| len = le32_to_cpu(sge[0].buffer_length) + |
| le32_to_cpu(sge[1].buffer_length); |
| icmnd->payload_offset_length = cpu_to_le16(len); |
| icmnd->xri_tag = cpu_to_le16(xri); |
| icmnd->context_tag = cpu_to_le16(rpi); |
| icmnd->timer = timeout; |
| |
| /* WQE word 4 contains read transfer length */ |
| icmnd->class_pu_byte |= 2 << SLI4_ICMD_WQE_PU_SHFT; |
| icmnd->class_pu_byte |= SLI4_GENERIC_CLASS_CLASS_3; |
| icmnd->command = SLI4_WQE_FCP_ICMND64; |
| icmnd->dif_ct_bs_byte |= |
| SLI4_GENERIC_CONTEXT_RPI << SLI4_ICMD_WQE_CT_SHFT; |
| |
| icmnd->abort_tag = cpu_to_le32(xri); |
| |
| icmnd->request_tag = cpu_to_le16(tag); |
| icmnd->len_loc1_byte |= SLI4_ICMD_WQE_LEN_LOC_BIT1; |
| icmnd->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_ICMD_WQE_LEN_LOC_BIT2; |
| icmnd->cmd_type_byte |= SLI4_CMD_FCP_ICMND64_WQE; |
| icmnd->cq_id = cpu_to_le16(cq_id); |
| |
| return 0; |
| } |
| |
| int |
| sli_fcp_iread64_wqe(struct sli4 *sli, void *buf, struct efc_dma *sgl, |
| u32 first_data_sge, u32 xfer_len, u16 xri, u16 tag, |
| u16 cq_id, u32 rpi, u32 rnode_fcid, |
| u8 dif, u8 bs, u8 timeout) |
| { |
| struct sli4_fcp_iread64_wqe *iread = buf; |
| struct sli4_sge *sge = NULL; |
| struct sli4_bde *bptr; |
| u32 sge_flags, len; |
| |
| memset(buf, 0, sli->wqe_size); |
| |
| if (!sgl || !sgl->virt) { |
| efc_log_err(sli, "bad parameter sgl=%p virt=%p\n", |
| sgl, sgl ? sgl->virt : NULL); |
| return -EIO; |
| } |
| |
| sge = sgl->virt; |
| bptr = &iread->bde; |
| if (sli->params.sgl_pre_registered) { |
| iread->qosd_xbl_hlm_iod_dbde_wqes &= ~SLI4_IR_WQE_XBL; |
| |
| iread->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_IR_WQE_DBDE; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[0].buffer_length) & |
| SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.blp.low = sge[0].buffer_address_low; |
| bptr->u.blp.high = sge[0].buffer_address_high; |
| } else { |
| iread->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_IR_WQE_XBL; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(BLP)) | |
| (sgl->size & SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.blp.low = |
| cpu_to_le32(lower_32_bits(sgl->phys)); |
| bptr->u.blp.high = |
| cpu_to_le32(upper_32_bits(sgl->phys)); |
| |
| /* |
| * fill out fcp_cmnd buffer len and change resp buffer to be of |
| * type "skip" (note: response will still be written to sge[1] |
| * if necessary) |
| */ |
| len = le32_to_cpu(sge[0].buffer_length); |
| iread->fcp_cmd_buffer_length = cpu_to_le16(len); |
| |
| sge_flags = le32_to_cpu(sge[1].dw2_flags); |
| sge_flags &= (~SLI4_SGE_TYPE_MASK); |
| sge_flags |= (SLI4_SGE_TYPE_SKIP << SLI4_SGE_TYPE_SHIFT); |
| sge[1].dw2_flags = cpu_to_le32(sge_flags); |
| } |
| |
| len = le32_to_cpu(sge[0].buffer_length) + |
| le32_to_cpu(sge[1].buffer_length); |
| iread->payload_offset_length = cpu_to_le16(len); |
| iread->total_transfer_length = cpu_to_le32(xfer_len); |
| |
| iread->xri_tag = cpu_to_le16(xri); |
| iread->context_tag = cpu_to_le16(rpi); |
| |
| iread->timer = timeout; |
| |
| /* WQE word 4 contains read transfer length */ |
| iread->class_pu_byte |= 2 << SLI4_IR_WQE_PU_SHFT; |
| iread->class_pu_byte |= SLI4_GENERIC_CLASS_CLASS_3; |
| iread->command = SLI4_WQE_FCP_IREAD64; |
| iread->dif_ct_bs_byte |= |
| SLI4_GENERIC_CONTEXT_RPI << SLI4_IR_WQE_CT_SHFT; |
| iread->dif_ct_bs_byte |= dif; |
| iread->dif_ct_bs_byte |= bs << SLI4_IR_WQE_BS_SHFT; |
| |
| iread->abort_tag = cpu_to_le32(xri); |
| |
| iread->request_tag = cpu_to_le16(tag); |
| iread->len_loc1_byte |= SLI4_IR_WQE_LEN_LOC_BIT1; |
| iread->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_IR_WQE_LEN_LOC_BIT2; |
| iread->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_IR_WQE_IOD; |
| iread->cmd_type_byte |= SLI4_CMD_FCP_IREAD64_WQE; |
| iread->cq_id = cpu_to_le16(cq_id); |
| |
| if (sli->params.perf_hint) { |
| bptr = &iread->first_data_bde; |
| bptr->bde_type_buflen = cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[first_data_sge].buffer_length) & |
| SLI4_BDE_LEN_MASK)); |
| bptr->u.data.low = |
| sge[first_data_sge].buffer_address_low; |
| bptr->u.data.high = |
| sge[first_data_sge].buffer_address_high; |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_fcp_iwrite64_wqe(struct sli4 *sli, void *buf, struct efc_dma *sgl, |
| u32 first_data_sge, u32 xfer_len, |
| u32 first_burst, u16 xri, u16 tag, |
| u16 cq_id, u32 rpi, |
| u32 rnode_fcid, |
| u8 dif, u8 bs, u8 timeout) |
| { |
| struct sli4_fcp_iwrite64_wqe *iwrite = buf; |
| struct sli4_sge *sge = NULL; |
| struct sli4_bde *bptr; |
| u32 sge_flags, min, len; |
| |
| memset(buf, 0, sli->wqe_size); |
| |
| if (!sgl || !sgl->virt) { |
| efc_log_err(sli, "bad parameter sgl=%p virt=%p\n", |
| sgl, sgl ? sgl->virt : NULL); |
| return -EIO; |
| } |
| sge = sgl->virt; |
| bptr = &iwrite->bde; |
| if (sli->params.sgl_pre_registered) { |
| iwrite->qosd_xbl_hlm_iod_dbde_wqes &= ~SLI4_IWR_WQE_XBL; |
| |
| iwrite->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_IWR_WQE_DBDE; |
| bptr->bde_type_buflen = cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[0].buffer_length) & SLI4_BDE_LEN_MASK)); |
| bptr->u.data.low = sge[0].buffer_address_low; |
| bptr->u.data.high = sge[0].buffer_address_high; |
| } else { |
| iwrite->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_IWR_WQE_XBL; |
| |
| bptr->bde_type_buflen = cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (sgl->size & SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.blp.low = cpu_to_le32(lower_32_bits(sgl->phys)); |
| bptr->u.blp.high = cpu_to_le32(upper_32_bits(sgl->phys)); |
| |
| /* |
| * fill out fcp_cmnd buffer len and change resp buffer to be of |
| * type "skip" (note: response will still be written to sge[1] |
| * if necessary) |
| */ |
| len = le32_to_cpu(sge[0].buffer_length); |
| iwrite->fcp_cmd_buffer_length = cpu_to_le16(len); |
| sge_flags = le32_to_cpu(sge[1].dw2_flags); |
| sge_flags &= ~SLI4_SGE_TYPE_MASK; |
| sge_flags |= (SLI4_SGE_TYPE_SKIP << SLI4_SGE_TYPE_SHIFT); |
| sge[1].dw2_flags = cpu_to_le32(sge_flags); |
| } |
| |
| len = le32_to_cpu(sge[0].buffer_length) + |
| le32_to_cpu(sge[1].buffer_length); |
| iwrite->payload_offset_length = cpu_to_le16(len); |
| iwrite->total_transfer_length = cpu_to_le16(xfer_len); |
| min = (xfer_len < first_burst) ? xfer_len : first_burst; |
| iwrite->initial_transfer_length = cpu_to_le16(min); |
| |
| iwrite->xri_tag = cpu_to_le16(xri); |
| iwrite->context_tag = cpu_to_le16(rpi); |
| |
| iwrite->timer = timeout; |
| /* WQE word 4 contains read transfer length */ |
| iwrite->class_pu_byte |= 2 << SLI4_IWR_WQE_PU_SHFT; |
| iwrite->class_pu_byte |= SLI4_GENERIC_CLASS_CLASS_3; |
| iwrite->command = SLI4_WQE_FCP_IWRITE64; |
| iwrite->dif_ct_bs_byte |= |
| SLI4_GENERIC_CONTEXT_RPI << SLI4_IWR_WQE_CT_SHFT; |
| iwrite->dif_ct_bs_byte |= dif; |
| iwrite->dif_ct_bs_byte |= bs << SLI4_IWR_WQE_BS_SHFT; |
| |
| iwrite->abort_tag = cpu_to_le32(xri); |
| |
| iwrite->request_tag = cpu_to_le16(tag); |
| iwrite->len_loc1_byte |= SLI4_IWR_WQE_LEN_LOC_BIT1; |
| iwrite->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_IWR_WQE_LEN_LOC_BIT2; |
| iwrite->cmd_type_byte |= SLI4_CMD_FCP_IWRITE64_WQE; |
| iwrite->cq_id = cpu_to_le16(cq_id); |
| |
| if (sli->params.perf_hint) { |
| bptr = &iwrite->first_data_bde; |
| |
| bptr->bde_type_buflen = cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[first_data_sge].buffer_length) & |
| SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.data.low = sge[first_data_sge].buffer_address_low; |
| bptr->u.data.high = sge[first_data_sge].buffer_address_high; |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_fcp_treceive64_wqe(struct sli4 *sli, void *buf, struct efc_dma *sgl, |
| u32 first_data_sge, u16 cq_id, u8 dif, u8 bs, |
| struct sli_fcp_tgt_params *params) |
| { |
| struct sli4_fcp_treceive64_wqe *trecv = buf; |
| struct sli4_fcp_128byte_wqe *trecv_128 = buf; |
| struct sli4_sge *sge = NULL; |
| struct sli4_bde *bptr; |
| |
| memset(buf, 0, sli->wqe_size); |
| |
| if (!sgl || !sgl->virt) { |
| efc_log_err(sli, "bad parameter sgl=%p virt=%p\n", |
| sgl, sgl ? sgl->virt : NULL); |
| return -EIO; |
| } |
| sge = sgl->virt; |
| bptr = &trecv->bde; |
| if (sli->params.sgl_pre_registered) { |
| trecv->qosd_xbl_hlm_iod_dbde_wqes &= ~SLI4_TRCV_WQE_XBL; |
| |
| trecv->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_TRCV_WQE_DBDE; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[0].buffer_length) |
| & SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.data.low = sge[0].buffer_address_low; |
| bptr->u.data.high = sge[0].buffer_address_high; |
| |
| trecv->payload_offset_length = sge[0].buffer_length; |
| } else { |
| trecv->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_TRCV_WQE_XBL; |
| |
| /* if data is a single physical address, use a BDE */ |
| if (!dif && |
| params->xmit_len <= le32_to_cpu(sge[2].buffer_length)) { |
| trecv->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_TRCV_WQE_DBDE; |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[2].buffer_length) |
| & SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.data.low = sge[2].buffer_address_low; |
| bptr->u.data.high = sge[2].buffer_address_high; |
| } else { |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(BLP)) | |
| (sgl->size & SLI4_BDE_LEN_MASK)); |
| bptr->u.blp.low = cpu_to_le32(lower_32_bits(sgl->phys)); |
| bptr->u.blp.high = |
| cpu_to_le32(upper_32_bits(sgl->phys)); |
| } |
| } |
| |
| trecv->relative_offset = cpu_to_le32(params->offset); |
| |
| if (params->flags & SLI4_IO_CONTINUATION) |
| trecv->eat_xc_ccpe |= SLI4_TRCV_WQE_XC; |
| |
| trecv->xri_tag = cpu_to_le16(params->xri); |
| |
| trecv->context_tag = cpu_to_le16(params->rpi); |
| |
| /* WQE uses relative offset */ |
| trecv->class_ar_pu_byte |= 1 << SLI4_TRCV_WQE_PU_SHFT; |
| |
| if (params->flags & SLI4_IO_AUTO_GOOD_RESPONSE) |
| trecv->class_ar_pu_byte |= SLI4_TRCV_WQE_AR; |
| |
| trecv->command = SLI4_WQE_FCP_TRECEIVE64; |
| trecv->class_ar_pu_byte |= SLI4_GENERIC_CLASS_CLASS_3; |
| trecv->dif_ct_bs_byte |= |
| SLI4_GENERIC_CONTEXT_RPI << SLI4_TRCV_WQE_CT_SHFT; |
| trecv->dif_ct_bs_byte |= bs << SLI4_TRCV_WQE_BS_SHFT; |
| |
| trecv->remote_xid = cpu_to_le16(params->ox_id); |
| |
| trecv->request_tag = cpu_to_le16(params->tag); |
| |
| trecv->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_TRCV_WQE_IOD; |
| |
| trecv->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_TRCV_WQE_LEN_LOC_BIT2; |
| |
| trecv->cmd_type_byte |= SLI4_CMD_FCP_TRECEIVE64_WQE; |
| |
| trecv->cq_id = cpu_to_le16(cq_id); |
| |
| trecv->fcp_data_receive_length = cpu_to_le32(params->xmit_len); |
| |
| if (sli->params.perf_hint) { |
| bptr = &trecv->first_data_bde; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[first_data_sge].buffer_length) & |
| SLI4_BDE_LEN_MASK)); |
| bptr->u.data.low = sge[first_data_sge].buffer_address_low; |
| bptr->u.data.high = sge[first_data_sge].buffer_address_high; |
| } |
| |
| /* The upper 7 bits of csctl is the priority */ |
| if (params->cs_ctl & SLI4_MASK_CCP) { |
| trecv->eat_xc_ccpe |= SLI4_TRCV_WQE_CCPE; |
| trecv->ccp = (params->cs_ctl & SLI4_MASK_CCP); |
| } |
| |
| if (params->app_id && sli->wqe_size == SLI4_WQE_EXT_BYTES && |
| !(trecv->eat_xc_ccpe & SLI4_TRSP_WQE_EAT)) { |
| trecv->lloc1_appid |= SLI4_TRCV_WQE_APPID; |
| trecv->qosd_xbl_hlm_iod_dbde_wqes |= SLI4_TRCV_WQE_WQES; |
| trecv_128->dw[31] = params->app_id; |
| } |
| return 0; |
| } |
| |
| int |
| sli_fcp_cont_treceive64_wqe(struct sli4 *sli, void *buf, |
| struct efc_dma *sgl, u32 first_data_sge, |
| u16 sec_xri, u16 cq_id, u8 dif, u8 bs, |
| struct sli_fcp_tgt_params *params) |
| { |
| int rc; |
| |
| rc = sli_fcp_treceive64_wqe(sli, buf, sgl, first_data_sge, |
| cq_id, dif, bs, params); |
| if (!rc) { |
| struct sli4_fcp_treceive64_wqe *trecv = buf; |
| |
| trecv->command = SLI4_WQE_FCP_CONT_TRECEIVE64; |
| trecv->dword5.sec_xri_tag = cpu_to_le16(sec_xri); |
| } |
| return rc; |
| } |
| |
| int |
| sli_fcp_trsp64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl, |
| u16 cq_id, u8 port_owned, struct sli_fcp_tgt_params *params) |
| { |
| struct sli4_fcp_trsp64_wqe *trsp = buf; |
| struct sli4_fcp_128byte_wqe *trsp_128 = buf; |
| |
| memset(buf, 0, sli4->wqe_size); |
| |
| if (params->flags & SLI4_IO_AUTO_GOOD_RESPONSE) { |
| trsp->class_ag_byte |= SLI4_TRSP_WQE_AG; |
| } else { |
| struct sli4_sge *sge = sgl->virt; |
| struct sli4_bde *bptr; |
| |
| if (sli4->params.sgl_pre_registered || port_owned) |
| trsp->qosd_xbl_hlm_dbde_wqes |= SLI4_TRSP_WQE_DBDE; |
| else |
| trsp->qosd_xbl_hlm_dbde_wqes |= SLI4_TRSP_WQE_XBL; |
| bptr = &trsp->bde; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[0].buffer_length) & |
| SLI4_BDE_LEN_MASK)); |
| bptr->u.data.low = sge[0].buffer_address_low; |
| bptr->u.data.high = sge[0].buffer_address_high; |
| |
| trsp->fcp_response_length = cpu_to_le32(params->xmit_len); |
| } |
| |
| if (params->flags & SLI4_IO_CONTINUATION) |
| trsp->eat_xc_ccpe |= SLI4_TRSP_WQE_XC; |
| |
| trsp->xri_tag = cpu_to_le16(params->xri); |
| trsp->rpi = cpu_to_le16(params->rpi); |
| |
| trsp->command = SLI4_WQE_FCP_TRSP64; |
| trsp->class_ag_byte |= SLI4_GENERIC_CLASS_CLASS_3; |
| |
| trsp->remote_xid = cpu_to_le16(params->ox_id); |
| trsp->request_tag = cpu_to_le16(params->tag); |
| if (params->flags & SLI4_IO_DNRX) |
| trsp->ct_dnrx_byte |= SLI4_TRSP_WQE_DNRX; |
| else |
| trsp->ct_dnrx_byte &= ~SLI4_TRSP_WQE_DNRX; |
| |
| trsp->lloc1_appid |= 0x1; |
| trsp->cq_id = cpu_to_le16(cq_id); |
| trsp->cmd_type_byte = SLI4_CMD_FCP_TRSP64_WQE; |
| |
| /* The upper 7 bits of csctl is the priority */ |
| if (params->cs_ctl & SLI4_MASK_CCP) { |
| trsp->eat_xc_ccpe |= SLI4_TRSP_WQE_CCPE; |
| trsp->ccp = (params->cs_ctl & SLI4_MASK_CCP); |
| } |
| |
| if (params->app_id && sli4->wqe_size == SLI4_WQE_EXT_BYTES && |
| !(trsp->eat_xc_ccpe & SLI4_TRSP_WQE_EAT)) { |
| trsp->lloc1_appid |= SLI4_TRSP_WQE_APPID; |
| trsp->qosd_xbl_hlm_dbde_wqes |= SLI4_TRSP_WQE_WQES; |
| trsp_128->dw[31] = params->app_id; |
| } |
| return 0; |
| } |
| |
| int |
| sli_fcp_tsend64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl, |
| u32 first_data_sge, u16 cq_id, u8 dif, u8 bs, |
| struct sli_fcp_tgt_params *params) |
| { |
| struct sli4_fcp_tsend64_wqe *tsend = buf; |
| struct sli4_fcp_128byte_wqe *tsend_128 = buf; |
| struct sli4_sge *sge = NULL; |
| struct sli4_bde *bptr; |
| |
| memset(buf, 0, sli4->wqe_size); |
| |
| if (!sgl || !sgl->virt) { |
| efc_log_err(sli4, "bad parameter sgl=%p virt=%p\n", |
| sgl, sgl ? sgl->virt : NULL); |
| return -EIO; |
| } |
| sge = sgl->virt; |
| |
| bptr = &tsend->bde; |
| if (sli4->params.sgl_pre_registered) { |
| tsend->ll_qd_xbl_hlm_iod_dbde &= ~SLI4_TSEND_WQE_XBL; |
| |
| tsend->ll_qd_xbl_hlm_iod_dbde |= SLI4_TSEND_WQE_DBDE; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[2].buffer_length) & |
| SLI4_BDE_LEN_MASK)); |
| |
| /* TSEND64_WQE specifies first two SGE are skipped (3rd is |
| * valid) |
| */ |
| bptr->u.data.low = sge[2].buffer_address_low; |
| bptr->u.data.high = sge[2].buffer_address_high; |
| } else { |
| tsend->ll_qd_xbl_hlm_iod_dbde |= SLI4_TSEND_WQE_XBL; |
| |
| /* if data is a single physical address, use a BDE */ |
| if (!dif && |
| params->xmit_len <= le32_to_cpu(sge[2].buffer_length)) { |
| tsend->ll_qd_xbl_hlm_iod_dbde |= SLI4_TSEND_WQE_DBDE; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[2].buffer_length) & |
| SLI4_BDE_LEN_MASK)); |
| /* |
| * TSEND64_WQE specifies first two SGE are skipped |
| * (i.e. 3rd is valid) |
| */ |
| bptr->u.data.low = |
| sge[2].buffer_address_low; |
| bptr->u.data.high = |
| sge[2].buffer_address_high; |
| } else { |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(BLP)) | |
| (sgl->size & |
| SLI4_BDE_LEN_MASK)); |
| bptr->u.blp.low = |
| cpu_to_le32(lower_32_bits(sgl->phys)); |
| bptr->u.blp.high = |
| cpu_to_le32(upper_32_bits(sgl->phys)); |
| } |
| } |
| |
| tsend->relative_offset = cpu_to_le32(params->offset); |
| |
| if (params->flags & SLI4_IO_CONTINUATION) |
| tsend->dw10byte2 |= SLI4_TSEND_XC; |
| |
| tsend->xri_tag = cpu_to_le16(params->xri); |
| |
| tsend->rpi = cpu_to_le16(params->rpi); |
| /* WQE uses relative offset */ |
| tsend->class_pu_ar_byte |= 1 << SLI4_TSEND_WQE_PU_SHFT; |
| |
| if (params->flags & SLI4_IO_AUTO_GOOD_RESPONSE) |
| tsend->class_pu_ar_byte |= SLI4_TSEND_WQE_AR; |
| |
| tsend->command = SLI4_WQE_FCP_TSEND64; |
| tsend->class_pu_ar_byte |= SLI4_GENERIC_CLASS_CLASS_3; |
| tsend->ct_byte |= SLI4_GENERIC_CONTEXT_RPI << SLI4_TSEND_CT_SHFT; |
| tsend->ct_byte |= dif; |
| tsend->ct_byte |= bs << SLI4_TSEND_BS_SHFT; |
| |
| tsend->remote_xid = cpu_to_le16(params->ox_id); |
| |
| tsend->request_tag = cpu_to_le16(params->tag); |
| |
| tsend->ll_qd_xbl_hlm_iod_dbde |= SLI4_TSEND_LEN_LOC_BIT2; |
| |
| tsend->cq_id = cpu_to_le16(cq_id); |
| |
| tsend->cmd_type_byte |= SLI4_CMD_FCP_TSEND64_WQE; |
| |
| tsend->fcp_data_transmit_length = cpu_to_le32(params->xmit_len); |
| |
| if (sli4->params.perf_hint) { |
| bptr = &tsend->first_data_bde; |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (le32_to_cpu(sge[first_data_sge].buffer_length) & |
| SLI4_BDE_LEN_MASK)); |
| bptr->u.data.low = |
| sge[first_data_sge].buffer_address_low; |
| bptr->u.data.high = |
| sge[first_data_sge].buffer_address_high; |
| } |
| |
| /* The upper 7 bits of csctl is the priority */ |
| if (params->cs_ctl & SLI4_MASK_CCP) { |
| tsend->dw10byte2 |= SLI4_TSEND_CCPE; |
| tsend->ccp = (params->cs_ctl & SLI4_MASK_CCP); |
| } |
| |
| if (params->app_id && sli4->wqe_size == SLI4_WQE_EXT_BYTES && |
| !(tsend->dw10byte2 & SLI4_TSEND_EAT)) { |
| tsend->dw10byte0 |= SLI4_TSEND_APPID_VALID; |
| tsend->ll_qd_xbl_hlm_iod_dbde |= SLI4_TSEND_WQES; |
| tsend_128->dw[31] = params->app_id; |
| } |
| return 0; |
| } |
| |
| int |
| sli_gen_request64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl, |
| struct sli_ct_params *params) |
| { |
| struct sli4_gen_request64_wqe *gen = buf; |
| struct sli4_sge *sge = NULL; |
| struct sli4_bde *bptr; |
| |
| memset(buf, 0, sli4->wqe_size); |
| |
| if (!sgl || !sgl->virt) { |
| efc_log_err(sli4, "bad parameter sgl=%p virt=%p\n", |
| sgl, sgl ? sgl->virt : NULL); |
| return -EIO; |
| } |
| sge = sgl->virt; |
| bptr = &gen->bde; |
| |
| if (sli4->params.sgl_pre_registered) { |
| gen->dw10flags1 &= ~SLI4_GEN_REQ64_WQE_XBL; |
| |
| gen->dw10flags1 |= SLI4_GEN_REQ64_WQE_DBDE; |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (params->xmit_len & SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.data.low = sge[0].buffer_address_low; |
| bptr->u.data.high = sge[0].buffer_address_high; |
| } else { |
| gen->dw10flags1 |= SLI4_GEN_REQ64_WQE_XBL; |
| |
| bptr->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(BLP)) | |
| ((2 * sizeof(struct sli4_sge)) & |
| SLI4_BDE_LEN_MASK)); |
| |
| bptr->u.blp.low = |
| cpu_to_le32(lower_32_bits(sgl->phys)); |
| bptr->u.blp.high = |
| cpu_to_le32(upper_32_bits(sgl->phys)); |
| } |
| |
| gen->request_payload_length = cpu_to_le32(params->xmit_len); |
| gen->max_response_payload_length = cpu_to_le32(params->rsp_len); |
| |
| gen->df_ctl = params->df_ctl; |
| gen->type = params->type; |
| gen->r_ctl = params->r_ctl; |
| |
| gen->xri_tag = cpu_to_le16(params->xri); |
| |
| gen->ct_byte = SLI4_GENERIC_CONTEXT_RPI << SLI4_GEN_REQ64_CT_SHFT; |
| gen->context_tag = cpu_to_le16(params->rpi); |
| |
| gen->class_byte = SLI4_GENERIC_CLASS_CLASS_3; |
| |
| gen->command = SLI4_WQE_GEN_REQUEST64; |
| |
| gen->timer = params->timeout; |
| |
| gen->request_tag = cpu_to_le16(params->tag); |
| |
| gen->dw10flags1 |= SLI4_GEN_REQ64_WQE_IOD; |
| |
| gen->dw10flags0 |= SLI4_GEN_REQ64_WQE_QOSD; |
| |
| gen->cmd_type_byte = SLI4_CMD_GEN_REQUEST64_WQE; |
| |
| gen->cq_id = cpu_to_le16(SLI4_CQ_DEFAULT); |
| |
| return 0; |
| } |
| |
| int |
| sli_send_frame_wqe(struct sli4 *sli, void *buf, u8 sof, u8 eof, u32 *hdr, |
| struct efc_dma *payload, u32 req_len, u8 timeout, u16 xri, |
| u16 req_tag) |
| { |
| struct sli4_send_frame_wqe *sf = buf; |
| |
| memset(buf, 0, sli->wqe_size); |
| |
| sf->dw10flags1 |= SLI4_SF_WQE_DBDE; |
| sf->bde.bde_type_buflen = cpu_to_le32(req_len & |
| SLI4_BDE_LEN_MASK); |
| sf->bde.u.data.low = cpu_to_le32(lower_32_bits(payload->phys)); |
| sf->bde.u.data.high = cpu_to_le32(upper_32_bits(payload->phys)); |
| |
| /* Copy FC header */ |
| sf->fc_header_0_1[0] = cpu_to_le32(hdr[0]); |
| sf->fc_header_0_1[1] = cpu_to_le32(hdr[1]); |
| sf->fc_header_2_5[0] = cpu_to_le32(hdr[2]); |
| sf->fc_header_2_5[1] = cpu_to_le32(hdr[3]); |
| sf->fc_header_2_5[2] = cpu_to_le32(hdr[4]); |
| sf->fc_header_2_5[3] = cpu_to_le32(hdr[5]); |
| |
| sf->frame_length = cpu_to_le32(req_len); |
| |
| sf->xri_tag = cpu_to_le16(xri); |
| sf->dw7flags0 &= ~SLI4_SF_PU; |
| sf->context_tag = 0; |
| |
| sf->ct_byte &= ~SLI4_SF_CT; |
| sf->command = SLI4_WQE_SEND_FRAME; |
| sf->dw7flags0 |= SLI4_GENERIC_CLASS_CLASS_3; |
| sf->timer = timeout; |
| |
| sf->request_tag = cpu_to_le16(req_tag); |
| sf->eof = eof; |
| sf->sof = sof; |
| |
| sf->dw10flags1 &= ~SLI4_SF_QOSD; |
| sf->dw10flags0 |= SLI4_SF_LEN_LOC_BIT1; |
| sf->dw10flags2 &= ~SLI4_SF_XC; |
| |
| sf->dw10flags1 |= SLI4_SF_XBL; |
| |
| sf->cmd_type_byte |= SLI4_CMD_SEND_FRAME_WQE; |
| sf->cq_id = cpu_to_le16(0xffff); |
| |
| return 0; |
| } |
| |
| int |
| sli_xmit_bls_rsp64_wqe(struct sli4 *sli, void *buf, |
| struct sli_bls_payload *payload, |
| struct sli_bls_params *params) |
| { |
| struct sli4_xmit_bls_rsp_wqe *bls = buf; |
| u32 dw_ridflags = 0; |
| |
| /* |
| * Callers can either specify RPI or S_ID, but not both |
| */ |
| if (params->rpi_registered && params->s_id != U32_MAX) { |
| efc_log_info(sli, "S_ID specified for attached remote node %d\n", |
| params->rpi); |
| return -EIO; |
| } |
| |
| memset(buf, 0, sli->wqe_size); |
| |
| if (payload->type == SLI4_SLI_BLS_ACC) { |
| bls->payload_word0 = |
| cpu_to_le32((payload->u.acc.seq_id_last << 16) | |
| (payload->u.acc.seq_id_validity << 24)); |
| bls->high_seq_cnt = payload->u.acc.high_seq_cnt; |
| bls->low_seq_cnt = payload->u.acc.low_seq_cnt; |
| } else if (payload->type == SLI4_SLI_BLS_RJT) { |
| bls->payload_word0 = |
| cpu_to_le32(*((u32 *)&payload->u.rjt)); |
| dw_ridflags |= SLI4_BLS_RSP_WQE_AR; |
| } else { |
| efc_log_info(sli, "bad BLS type %#x\n", payload->type); |
| return -EIO; |
| } |
| |
| bls->ox_id = payload->ox_id; |
| bls->rx_id = payload->rx_id; |
| |
| if (params->rpi_registered) { |
| bls->dw8flags0 |= |
| SLI4_GENERIC_CONTEXT_RPI << SLI4_BLS_RSP_WQE_CT_SHFT; |
| bls->context_tag = cpu_to_le16(params->rpi); |
| } else { |
| bls->dw8flags0 |= |
| SLI4_GENERIC_CONTEXT_VPI << SLI4_BLS_RSP_WQE_CT_SHFT; |
| bls->context_tag = cpu_to_le16(params->vpi); |
| |
| bls->local_n_port_id_dword |= |
| cpu_to_le32(params->s_id & 0x00ffffff); |
| |
| dw_ridflags = (dw_ridflags & ~SLI4_BLS_RSP_RID) | |
| (params->d_id & SLI4_BLS_RSP_RID); |
| |
| bls->temporary_rpi = cpu_to_le16(params->rpi); |
| } |
| |
| bls->xri_tag = cpu_to_le16(params->xri); |
| |
| bls->dw8flags1 |= SLI4_GENERIC_CLASS_CLASS_3; |
| |
| bls->command = SLI4_WQE_XMIT_BLS_RSP; |
| |
| bls->request_tag = cpu_to_le16(params->tag); |
| |
| bls->dw11flags1 |= SLI4_BLS_RSP_WQE_QOSD; |
| |
| bls->remote_id_dword = cpu_to_le32(dw_ridflags); |
| bls->cq_id = cpu_to_le16(SLI4_CQ_DEFAULT); |
| |
| bls->dw12flags0 |= SLI4_CMD_XMIT_BLS_RSP64_WQE; |
| |
| return 0; |
| } |
| |
| int |
| sli_xmit_els_rsp64_wqe(struct sli4 *sli, void *buf, struct efc_dma *rsp, |
| struct sli_els_params *params) |
| { |
| struct sli4_xmit_els_rsp64_wqe *els = buf; |
| |
| memset(buf, 0, sli->wqe_size); |
| |
| if (sli->params.sgl_pre_registered) |
| els->flags2 |= SLI4_ELS_DBDE; |
| else |
| els->flags2 |= SLI4_ELS_XBL; |
| |
| els->els_response_payload.bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (params->rsp_len & SLI4_BDE_LEN_MASK)); |
| els->els_response_payload.u.data.low = |
| cpu_to_le32(lower_32_bits(rsp->phys)); |
| els->els_response_payload.u.data.high = |
| cpu_to_le32(upper_32_bits(rsp->phys)); |
| |
| els->els_response_payload_length = cpu_to_le32(params->rsp_len); |
| |
| els->xri_tag = cpu_to_le16(params->xri); |
| |
| els->class_byte |= SLI4_GENERIC_CLASS_CLASS_3; |
| |
| els->command = SLI4_WQE_ELS_RSP64; |
| |
| els->request_tag = cpu_to_le16(params->tag); |
| |
| els->ox_id = cpu_to_le16(params->ox_id); |
| |
| els->flags2 |= SLI4_ELS_QOSD; |
| |
| els->cmd_type_wqec = SLI4_ELS_REQUEST64_CMD_GEN; |
| |
| els->cq_id = cpu_to_le16(SLI4_CQ_DEFAULT); |
| |
| if (params->rpi_registered) { |
| els->ct_byte |= |
| SLI4_GENERIC_CONTEXT_RPI << SLI4_ELS_CT_OFFSET; |
| els->context_tag = cpu_to_le16(params->rpi); |
| return 0; |
| } |
| |
| els->ct_byte |= SLI4_GENERIC_CONTEXT_VPI << SLI4_ELS_CT_OFFSET; |
| els->context_tag = cpu_to_le16(params->vpi); |
| els->rid_dw = cpu_to_le32(params->d_id & SLI4_ELS_RID); |
| els->temporary_rpi = cpu_to_le16(params->rpi); |
| if (params->s_id != U32_MAX) { |
| els->sid_dw |= |
| cpu_to_le32(SLI4_ELS_SP | (params->s_id & SLI4_ELS_SID)); |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_xmit_sequence64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *payload, |
| struct sli_ct_params *params) |
| { |
| struct sli4_xmit_sequence64_wqe *xmit = buf; |
| |
| memset(buf, 0, sli4->wqe_size); |
| |
| if (!payload || !payload->virt) { |
| efc_log_err(sli4, "bad parameter sgl=%p virt=%p\n", |
| payload, payload ? payload->virt : NULL); |
| return -EIO; |
| } |
| |
| if (sli4->params.sgl_pre_registered) |
| xmit->dw10w0 |= cpu_to_le16(SLI4_SEQ_WQE_DBDE); |
| else |
| xmit->dw10w0 |= cpu_to_le16(SLI4_SEQ_WQE_XBL); |
| |
| xmit->bde.bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (params->rsp_len & SLI4_BDE_LEN_MASK)); |
| xmit->bde.u.data.low = |
| cpu_to_le32(lower_32_bits(payload->phys)); |
| xmit->bde.u.data.high = |
| cpu_to_le32(upper_32_bits(payload->phys)); |
| xmit->sequence_payload_len = cpu_to_le32(params->rsp_len); |
| |
| xmit->remote_n_port_id_dword |= cpu_to_le32(params->d_id & 0x00ffffff); |
| |
| xmit->relative_offset = 0; |
| |
| /* sequence initiative - this matches what is seen from |
| * FC switches in response to FCGS commands |
| */ |
| xmit->dw5flags0 &= (~SLI4_SEQ_WQE_SI); |
| xmit->dw5flags0 &= (~SLI4_SEQ_WQE_FT);/* force transmit */ |
| xmit->dw5flags0 &= (~SLI4_SEQ_WQE_XO);/* exchange responder */ |
| xmit->dw5flags0 |= SLI4_SEQ_WQE_LS;/* last in seqence */ |
| xmit->df_ctl = params->df_ctl; |
| xmit->type = params->type; |
| xmit->r_ctl = params->r_ctl; |
| |
| xmit->xri_tag = cpu_to_le16(params->xri); |
| xmit->context_tag = cpu_to_le16(params->rpi); |
| |
| xmit->dw7flags0 &= ~SLI4_SEQ_WQE_DIF; |
| xmit->dw7flags0 |= |
| SLI4_GENERIC_CONTEXT_RPI << SLI4_SEQ_WQE_CT_SHIFT; |
| xmit->dw7flags0 &= ~SLI4_SEQ_WQE_BS; |
| |
| xmit->command = SLI4_WQE_XMIT_SEQUENCE64; |
| xmit->dw7flags1 |= SLI4_GENERIC_CLASS_CLASS_3; |
| xmit->dw7flags1 &= ~SLI4_SEQ_WQE_PU; |
| xmit->timer = params->timeout; |
| |
| xmit->abort_tag = 0; |
| xmit->request_tag = cpu_to_le16(params->tag); |
| xmit->remote_xid = cpu_to_le16(params->ox_id); |
| |
| xmit->dw10w0 |= |
| cpu_to_le16(SLI4_ELS_REQUEST64_DIR_READ << SLI4_SEQ_WQE_IOD_SHIFT); |
| |
| xmit->cmd_type_wqec_byte |= SLI4_CMD_XMIT_SEQUENCE64_WQE; |
| |
| xmit->dw10w0 |= cpu_to_le16(2 << SLI4_SEQ_WQE_LEN_LOC_SHIFT); |
| |
| xmit->cq_id = cpu_to_le16(0xFFFF); |
| |
| return 0; |
| } |
| |
| int |
| sli_requeue_xri_wqe(struct sli4 *sli4, void *buf, u16 xri, u16 tag, u16 cq_id) |
| { |
| struct sli4_requeue_xri_wqe *requeue = buf; |
| |
| memset(buf, 0, sli4->wqe_size); |
| |
| requeue->command = SLI4_WQE_REQUEUE_XRI; |
| requeue->xri_tag = cpu_to_le16(xri); |
| requeue->request_tag = cpu_to_le16(tag); |
| requeue->flags2 |= cpu_to_le16(SLI4_REQU_XRI_WQE_XC); |
| requeue->flags1 |= cpu_to_le16(SLI4_REQU_XRI_WQE_QOSD); |
| requeue->cq_id = cpu_to_le16(cq_id); |
| requeue->cmd_type_wqec_byte = SLI4_CMD_REQUEUE_XRI_WQE; |
| return 0; |
| } |
| |
| int |
| sli_fc_process_link_attention(struct sli4 *sli4, void *acqe) |
| { |
| struct sli4_link_attention *link_attn = acqe; |
| struct sli4_link_event event = { 0 }; |
| |
| efc_log_info(sli4, "link=%d attn_type=%#x top=%#x speed=%#x pfault=%#x\n", |
| link_attn->link_number, link_attn->attn_type, |
| link_attn->topology, link_attn->port_speed, |
| link_attn->port_fault); |
| efc_log_info(sli4, "shared_lnk_status=%#x logl_lnk_speed=%#x evttag=%#x\n", |
| link_attn->shared_link_status, |
| le16_to_cpu(link_attn->logical_link_speed), |
| le32_to_cpu(link_attn->event_tag)); |
| |
| if (!sli4->link) |
| return -EIO; |
| |
| event.medium = SLI4_LINK_MEDIUM_FC; |
| |
| switch (link_attn->attn_type) { |
| case SLI4_LNK_ATTN_TYPE_LINK_UP: |
| event.status = SLI4_LINK_STATUS_UP; |
| break; |
| case SLI4_LNK_ATTN_TYPE_LINK_DOWN: |
| event.status = SLI4_LINK_STATUS_DOWN; |
| break; |
| case SLI4_LNK_ATTN_TYPE_NO_HARD_ALPA: |
| efc_log_info(sli4, "attn_type: no hard alpa\n"); |
| event.status = SLI4_LINK_STATUS_NO_ALPA; |
| break; |
| default: |
| efc_log_info(sli4, "attn_type: unknown\n"); |
| break; |
| } |
| |
| switch (link_attn->event_type) { |
| case SLI4_EVENT_LINK_ATTENTION: |
| break; |
| case SLI4_EVENT_SHARED_LINK_ATTENTION: |
| efc_log_info(sli4, "event_type: FC shared link event\n"); |
| break; |
| default: |
| efc_log_info(sli4, "event_type: unknown\n"); |
| break; |
| } |
| |
| switch (link_attn->topology) { |
| case SLI4_LNK_ATTN_P2P: |
| event.topology = SLI4_LINK_TOPO_NON_FC_AL; |
| break; |
| case SLI4_LNK_ATTN_FC_AL: |
| event.topology = SLI4_LINK_TOPO_FC_AL; |
| break; |
| case SLI4_LNK_ATTN_INTERNAL_LOOPBACK: |
| efc_log_info(sli4, "topology Internal loopback\n"); |
| event.topology = SLI4_LINK_TOPO_LOOPBACK_INTERNAL; |
| break; |
| case SLI4_LNK_ATTN_SERDES_LOOPBACK: |
| efc_log_info(sli4, "topology serdes loopback\n"); |
| event.topology = SLI4_LINK_TOPO_LOOPBACK_EXTERNAL; |
| break; |
| default: |
| efc_log_info(sli4, "topology: unknown\n"); |
| break; |
| } |
| |
| event.speed = link_attn->port_speed * 1000; |
| |
| sli4->link(sli4->link_arg, (void *)&event); |
| |
| return 0; |
| } |
| |
| int |
| sli_fc_cqe_parse(struct sli4 *sli4, struct sli4_queue *cq, |
| u8 *cqe, enum sli4_qentry *etype, u16 *r_id) |
| { |
| u8 code = cqe[SLI4_CQE_CODE_OFFSET]; |
| int rc; |
| |
| switch (code) { |
| case SLI4_CQE_CODE_WORK_REQUEST_COMPLETION: |
| { |
| struct sli4_fc_wcqe *wcqe = (void *)cqe; |
| |
| *etype = SLI4_QENTRY_WQ; |
| *r_id = le16_to_cpu(wcqe->request_tag); |
| rc = wcqe->status; |
| |
| /* Flag errors except for FCP_RSP_FAILURE */ |
| if (rc && rc != SLI4_FC_WCQE_STATUS_FCP_RSP_FAILURE) { |
| efc_log_info(sli4, "WCQE: status=%#x hw_status=%#x tag=%#x\n", |
| wcqe->status, wcqe->hw_status, |
| le16_to_cpu(wcqe->request_tag)); |
| efc_log_info(sli4, "w1=%#x w2=%#x xb=%d\n", |
| le32_to_cpu(wcqe->wqe_specific_1), |
| le32_to_cpu(wcqe->wqe_specific_2), |
| (wcqe->flags & SLI4_WCQE_XB)); |
| efc_log_info(sli4, " %08X %08X %08X %08X\n", |
| ((u32 *)cqe)[0], ((u32 *)cqe)[1], |
| ((u32 *)cqe)[2], ((u32 *)cqe)[3]); |
| } |
| |
| break; |
| } |
| case SLI4_CQE_CODE_RQ_ASYNC: |
| { |
| struct sli4_fc_async_rcqe *rcqe = (void *)cqe; |
| |
| *etype = SLI4_QENTRY_RQ; |
| *r_id = le16_to_cpu(rcqe->fcfi_rq_id_word) & SLI4_RACQE_RQ_ID; |
| rc = rcqe->status; |
| break; |
| } |
| case SLI4_CQE_CODE_RQ_ASYNC_V1: |
| { |
| struct sli4_fc_async_rcqe_v1 *rcqe = (void *)cqe; |
| |
| *etype = SLI4_QENTRY_RQ; |
| *r_id = le16_to_cpu(rcqe->rq_id); |
| rc = rcqe->status; |
| break; |
| } |
| case SLI4_CQE_CODE_OPTIMIZED_WRITE_CMD: |
| { |
| struct sli4_fc_optimized_write_cmd_cqe *optcqe = (void *)cqe; |
| |
| *etype = SLI4_QENTRY_OPT_WRITE_CMD; |
| *r_id = le16_to_cpu(optcqe->rq_id); |
| rc = optcqe->status; |
| break; |
| } |
| case SLI4_CQE_CODE_OPTIMIZED_WRITE_DATA: |
| { |
| struct sli4_fc_optimized_write_data_cqe *dcqe = (void *)cqe; |
| |
| *etype = SLI4_QENTRY_OPT_WRITE_DATA; |
| *r_id = le16_to_cpu(dcqe->xri); |
| rc = dcqe->status; |
| |
| /* Flag errors */ |
| if (rc != SLI4_FC_WCQE_STATUS_SUCCESS) { |
| efc_log_info(sli4, "Optimized DATA CQE: status=%#x\n", |
| dcqe->status); |
| efc_log_info(sli4, "hstat=%#x xri=%#x dpl=%#x w3=%#x xb=%d\n", |
| dcqe->hw_status, le16_to_cpu(dcqe->xri), |
| le32_to_cpu(dcqe->total_data_placed), |
| ((u32 *)cqe)[3], |
| (dcqe->flags & SLI4_OCQE_XB)); |
| } |
| break; |
| } |
| case SLI4_CQE_CODE_RQ_COALESCING: |
| { |
| struct sli4_fc_coalescing_rcqe *rcqe = (void *)cqe; |
| |
| *etype = SLI4_QENTRY_RQ; |
| *r_id = le16_to_cpu(rcqe->rq_id); |
| rc = rcqe->status; |
| break; |
| } |
| case SLI4_CQE_CODE_XRI_ABORTED: |
| { |
| struct sli4_fc_xri_aborted_cqe *xa = (void *)cqe; |
| |
| *etype = SLI4_QENTRY_XABT; |
| *r_id = le16_to_cpu(xa->xri); |
| rc = 0; |
| break; |
| } |
| case SLI4_CQE_CODE_RELEASE_WQE: |
| { |
| struct sli4_fc_wqec *wqec = (void *)cqe; |
| |
| *etype = SLI4_QENTRY_WQ_RELEASE; |
| *r_id = le16_to_cpu(wqec->wq_id); |
| rc = 0; |
| break; |
| } |
| default: |
| efc_log_info(sli4, "CQE completion code %d not handled\n", |
| code); |
| *etype = SLI4_QENTRY_MAX; |
| *r_id = U16_MAX; |
| rc = -EINVAL; |
| } |
| |
| return rc; |
| } |
| |
| u32 |
| sli_fc_response_length(struct sli4 *sli4, u8 *cqe) |
| { |
| struct sli4_fc_wcqe *wcqe = (void *)cqe; |
| |
| return le32_to_cpu(wcqe->wqe_specific_1); |
| } |
| |
| u32 |
| sli_fc_io_length(struct sli4 *sli4, u8 *cqe) |
| { |
| struct sli4_fc_wcqe *wcqe = (void *)cqe; |
| |
| return le32_to_cpu(wcqe->wqe_specific_1); |
| } |
| |
| int |
| sli_fc_els_did(struct sli4 *sli4, u8 *cqe, u32 *d_id) |
| { |
| struct sli4_fc_wcqe *wcqe = (void *)cqe; |
| |
| *d_id = 0; |
| |
| if (wcqe->status) |
| return -EIO; |
| *d_id = le32_to_cpu(wcqe->wqe_specific_2) & 0x00ffffff; |
| return 0; |
| } |
| |
| u32 |
| sli_fc_ext_status(struct sli4 *sli4, u8 *cqe) |
| { |
| struct sli4_fc_wcqe *wcqe = (void *)cqe; |
| u32 mask; |
| |
| switch (wcqe->status) { |
| case SLI4_FC_WCQE_STATUS_FCP_RSP_FAILURE: |
| mask = U32_MAX; |
| break; |
| case SLI4_FC_WCQE_STATUS_LOCAL_REJECT: |
| case SLI4_FC_WCQE_STATUS_CMD_REJECT: |
| mask = 0xff; |
| break; |
| case SLI4_FC_WCQE_STATUS_NPORT_RJT: |
| case SLI4_FC_WCQE_STATUS_FABRIC_RJT: |
| case SLI4_FC_WCQE_STATUS_NPORT_BSY: |
| case SLI4_FC_WCQE_STATUS_FABRIC_BSY: |
| case SLI4_FC_WCQE_STATUS_LS_RJT: |
| mask = U32_MAX; |
| break; |
| case SLI4_FC_WCQE_STATUS_DI_ERROR: |
| mask = U32_MAX; |
| break; |
| default: |
| mask = 0; |
| } |
| |
| return le32_to_cpu(wcqe->wqe_specific_2) & mask; |
| } |
| |
| int |
| sli_fc_rqe_rqid_and_index(struct sli4 *sli4, u8 *cqe, u16 *rq_id, u32 *index) |
| { |
| int rc = -EIO; |
| u8 code = 0; |
| u16 rq_element_index; |
| |
| *rq_id = 0; |
| *index = U32_MAX; |
| |
| code = cqe[SLI4_CQE_CODE_OFFSET]; |
| |
| /* Retrieve the RQ index from the completion */ |
| if (code == SLI4_CQE_CODE_RQ_ASYNC) { |
| struct sli4_fc_async_rcqe *rcqe = (void *)cqe; |
| |
| *rq_id = le16_to_cpu(rcqe->fcfi_rq_id_word) & SLI4_RACQE_RQ_ID; |
| rq_element_index = |
| le16_to_cpu(rcqe->rq_elmt_indx_word) & SLI4_RACQE_RQ_EL_INDX; |
| *index = rq_element_index; |
| if (rcqe->status == SLI4_FC_ASYNC_RQ_SUCCESS) { |
| rc = 0; |
| } else { |
| rc = rcqe->status; |
| efc_log_info(sli4, "status=%02x (%s) rq_id=%d\n", |
| rcqe->status, |
| sli_fc_get_status_string(rcqe->status), |
| le16_to_cpu(rcqe->fcfi_rq_id_word) & |
| SLI4_RACQE_RQ_ID); |
| |
| efc_log_info(sli4, "pdpl=%x sof=%02x eof=%02x hdpl=%x\n", |
| le16_to_cpu(rcqe->data_placement_length), |
| rcqe->sof_byte, rcqe->eof_byte, |
| rcqe->hdpl_byte & SLI4_RACQE_HDPL); |
| } |
| } else if (code == SLI4_CQE_CODE_RQ_ASYNC_V1) { |
| struct sli4_fc_async_rcqe_v1 *rcqe_v1 = (void *)cqe; |
| |
| *rq_id = le16_to_cpu(rcqe_v1->rq_id); |
| rq_element_index = |
| (le16_to_cpu(rcqe_v1->rq_elmt_indx_word) & |
| SLI4_RACQE_RQ_EL_INDX); |
| *index = rq_element_index; |
| if (rcqe_v1->status == SLI4_FC_ASYNC_RQ_SUCCESS) { |
| rc = 0; |
| } else { |
| rc = rcqe_v1->status; |
| efc_log_info(sli4, "status=%02x (%s) rq_id=%d, index=%x\n", |
| rcqe_v1->status, |
| sli_fc_get_status_string(rcqe_v1->status), |
| le16_to_cpu(rcqe_v1->rq_id), rq_element_index); |
| |
| efc_log_info(sli4, "pdpl=%x sof=%02x eof=%02x hdpl=%x\n", |
| le16_to_cpu(rcqe_v1->data_placement_length), |
| rcqe_v1->sof_byte, rcqe_v1->eof_byte, |
| rcqe_v1->hdpl_byte & SLI4_RACQE_HDPL); |
| } |
| } else if (code == SLI4_CQE_CODE_OPTIMIZED_WRITE_CMD) { |
| struct sli4_fc_optimized_write_cmd_cqe *optcqe = (void *)cqe; |
| |
| *rq_id = le16_to_cpu(optcqe->rq_id); |
| *index = le16_to_cpu(optcqe->w1) & SLI4_OCQE_RQ_EL_INDX; |
| if (optcqe->status == SLI4_FC_ASYNC_RQ_SUCCESS) { |
| rc = 0; |
| } else { |
| rc = optcqe->status; |
| efc_log_info(sli4, "stat=%02x (%s) rqid=%d, idx=%x pdpl=%x\n", |
| optcqe->status, |
| sli_fc_get_status_string(optcqe->status), |
| le16_to_cpu(optcqe->rq_id), *index, |
| le16_to_cpu(optcqe->data_placement_length)); |
| |
| efc_log_info(sli4, "hdpl=%x oox=%d agxr=%d xri=0x%x rpi=%x\n", |
| (optcqe->hdpl_vld & SLI4_OCQE_HDPL), |
| (optcqe->flags1 & SLI4_OCQE_OOX), |
| (optcqe->flags1 & SLI4_OCQE_AGXR), |
| optcqe->xri, le16_to_cpu(optcqe->rpi)); |
| } |
| } else if (code == SLI4_CQE_CODE_RQ_COALESCING) { |
| struct sli4_fc_coalescing_rcqe *rcqe = (void *)cqe; |
| |
| rq_element_index = (le16_to_cpu(rcqe->rq_elmt_indx_word) & |
| SLI4_RCQE_RQ_EL_INDX); |
| |
| *rq_id = le16_to_cpu(rcqe->rq_id); |
| if (rcqe->status == SLI4_FC_COALESCE_RQ_SUCCESS) { |
| *index = rq_element_index; |
| rc = 0; |
| } else { |
| *index = U32_MAX; |
| rc = rcqe->status; |
| |
| efc_log_info(sli4, "stat=%02x (%s) rq_id=%d, idx=%x\n", |
| rcqe->status, |
| sli_fc_get_status_string(rcqe->status), |
| le16_to_cpu(rcqe->rq_id), rq_element_index); |
| efc_log_info(sli4, "rq_id=%#x sdpl=%x\n", |
| le16_to_cpu(rcqe->rq_id), |
| le16_to_cpu(rcqe->seq_placement_length)); |
| } |
| } else { |
| struct sli4_fc_async_rcqe *rcqe = (void *)cqe; |
| |
| *index = U32_MAX; |
| rc = rcqe->status; |
| |
| efc_log_info(sli4, "status=%02x rq_id=%d, index=%x pdpl=%x\n", |
| rcqe->status, |
| le16_to_cpu(rcqe->fcfi_rq_id_word) & SLI4_RACQE_RQ_ID, |
| (le16_to_cpu(rcqe->rq_elmt_indx_word) & SLI4_RACQE_RQ_EL_INDX), |
| le16_to_cpu(rcqe->data_placement_length)); |
| efc_log_info(sli4, "sof=%02x eof=%02x hdpl=%x\n", |
| rcqe->sof_byte, rcqe->eof_byte, |
| rcqe->hdpl_byte & SLI4_RACQE_HDPL); |
| } |
| |
| return rc; |
| } |
| |
| static int |
| sli_bmbx_wait(struct sli4 *sli4, u32 msec) |
| { |
| u32 val; |
| unsigned long end; |
| |
| /* Wait for the bootstrap mailbox to report "ready" */ |
| end = jiffies + msecs_to_jiffies(msec); |
| do { |
| val = readl(sli4->reg[0] + SLI4_BMBX_REG); |
| if (val & SLI4_BMBX_RDY) |
| return 0; |
| |
| usleep_range(1000, 2000); |
| } while (time_before(jiffies, end)); |
| |
| return -EIO; |
| } |
| |
| static int |
| sli_bmbx_write(struct sli4 *sli4) |
| { |
| u32 val; |
| |
| /* write buffer location to bootstrap mailbox register */ |
| val = sli_bmbx_write_hi(sli4->bmbx.phys); |
| writel(val, (sli4->reg[0] + SLI4_BMBX_REG)); |
| |
| if (sli_bmbx_wait(sli4, SLI4_BMBX_DELAY_US)) { |
| efc_log_crit(sli4, "BMBX WRITE_HI failed\n"); |
| return -EIO; |
| } |
| val = sli_bmbx_write_lo(sli4->bmbx.phys); |
| writel(val, (sli4->reg[0] + SLI4_BMBX_REG)); |
| |
| /* wait for SLI Port to set ready bit */ |
| return sli_bmbx_wait(sli4, SLI4_BMBX_TIMEOUT_MSEC); |
| } |
| |
| int |
| sli_bmbx_command(struct sli4 *sli4) |
| { |
| void *cqe = (u8 *)sli4->bmbx.virt + SLI4_BMBX_SIZE; |
| |
| if (sli_fw_error_status(sli4) > 0) { |
| efc_log_crit(sli4, "Chip is in an error state -Mailbox command rejected"); |
| efc_log_crit(sli4, " status=%#x error1=%#x error2=%#x\n", |
| sli_reg_read_status(sli4), |
| sli_reg_read_err1(sli4), |
| sli_reg_read_err2(sli4)); |
| return -EIO; |
| } |
| |
| /* Submit a command to the bootstrap mailbox and check the status */ |
| if (sli_bmbx_write(sli4)) { |
| efc_log_crit(sli4, "bmbx write fail phys=%pad reg=%#x\n", |
| &sli4->bmbx.phys, readl(sli4->reg[0] + SLI4_BMBX_REG)); |
| return -EIO; |
| } |
| |
| /* check completion queue entry status */ |
| if (le32_to_cpu(((struct sli4_mcqe *)cqe)->dw3_flags) & |
| SLI4_MCQE_VALID) { |
| return sli_cqe_mq(sli4, cqe); |
| } |
| efc_log_crit(sli4, "invalid or wrong type\n"); |
| return -EIO; |
| } |
| |
| int |
| sli_cmd_config_link(struct sli4 *sli4, void *buf) |
| { |
| struct sli4_cmd_config_link *config_link = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| config_link->hdr.command = SLI4_MBX_CMD_CONFIG_LINK; |
| |
| /* Port interprets zero in a field as "use default value" */ |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_down_link(struct sli4 *sli4, void *buf) |
| { |
| struct sli4_mbox_command_header *hdr = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| hdr->command = SLI4_MBX_CMD_DOWN_LINK; |
| |
| /* Port interprets zero in a field as "use default value" */ |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_dump_type4(struct sli4 *sli4, void *buf, u16 wki) |
| { |
| struct sli4_cmd_dump4 *cmd = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| cmd->hdr.command = SLI4_MBX_CMD_DUMP; |
| cmd->type_dword = cpu_to_le32(0x4); |
| cmd->wki_selection = cpu_to_le16(wki); |
| return 0; |
| } |
| |
| int |
| sli_cmd_common_read_transceiver_data(struct sli4 *sli4, void *buf, u32 page_num, |
| struct efc_dma *dma) |
| { |
| struct sli4_rqst_cmn_read_transceiver_data *req = NULL; |
| u32 psize; |
| |
| if (!dma) |
| psize = SLI4_CFG_PYLD_LENGTH(cmn_read_transceiver_data); |
| else |
| psize = dma->size; |
| |
| req = sli_config_cmd_init(sli4, buf, psize, dma); |
| if (!req) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&req->hdr, SLI4_CMN_READ_TRANS_DATA, |
| SLI4_SUBSYSTEM_COMMON, CMD_V0, |
| SLI4_RQST_PYLD_LEN(cmn_read_transceiver_data)); |
| |
| req->page_number = cpu_to_le32(page_num); |
| req->port = cpu_to_le32(sli4->port_number); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_read_link_stats(struct sli4 *sli4, void *buf, u8 req_ext_counters, |
| u8 clear_overflow_flags, |
| u8 clear_all_counters) |
| { |
| struct sli4_cmd_read_link_stats *cmd = buf; |
| u32 flags; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| cmd->hdr.command = SLI4_MBX_CMD_READ_LNK_STAT; |
| |
| flags = 0; |
| if (req_ext_counters) |
| flags |= SLI4_READ_LNKSTAT_REC; |
| if (clear_all_counters) |
| flags |= SLI4_READ_LNKSTAT_CLRC; |
| if (clear_overflow_flags) |
| flags |= SLI4_READ_LNKSTAT_CLOF; |
| |
| cmd->dw1_flags = cpu_to_le32(flags); |
| return 0; |
| } |
| |
| int |
| sli_cmd_read_status(struct sli4 *sli4, void *buf, u8 clear_counters) |
| { |
| struct sli4_cmd_read_status *cmd = buf; |
| u32 flags = 0; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| cmd->hdr.command = SLI4_MBX_CMD_READ_STATUS; |
| if (clear_counters) |
| flags |= SLI4_READSTATUS_CLEAR_COUNTERS; |
| else |
| flags &= ~SLI4_READSTATUS_CLEAR_COUNTERS; |
| |
| cmd->dw1_flags = cpu_to_le32(flags); |
| return 0; |
| } |
| |
| int |
| sli_cmd_init_link(struct sli4 *sli4, void *buf, u32 speed, u8 reset_alpa) |
| { |
| struct sli4_cmd_init_link *init_link = buf; |
| u32 flags = 0; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| init_link->hdr.command = SLI4_MBX_CMD_INIT_LINK; |
| |
| init_link->sel_reset_al_pa_dword = |
| cpu_to_le32(reset_alpa); |
| flags &= ~SLI4_INIT_LINK_F_LOOPBACK; |
| |
| init_link->link_speed_sel_code = cpu_to_le32(speed); |
| switch (speed) { |
| case SLI4_LINK_SPEED_1G: |
| case SLI4_LINK_SPEED_2G: |
| case SLI4_LINK_SPEED_4G: |
| case SLI4_LINK_SPEED_8G: |
| case SLI4_LINK_SPEED_16G: |
| case SLI4_LINK_SPEED_32G: |
| case SLI4_LINK_SPEED_64G: |
| flags |= SLI4_INIT_LINK_F_FIXED_SPEED; |
| break; |
| case SLI4_LINK_SPEED_10G: |
| efc_log_info(sli4, "unsupported FC speed %d\n", speed); |
| init_link->flags0 = cpu_to_le32(flags); |
| return -EIO; |
| } |
| |
| switch (sli4->topology) { |
| case SLI4_READ_CFG_TOPO_FC: |
| /* Attempt P2P but failover to FC-AL */ |
| flags |= SLI4_INIT_LINK_F_FAIL_OVER; |
| flags |= SLI4_INIT_LINK_F_P2P_FAIL_OVER; |
| break; |
| case SLI4_READ_CFG_TOPO_FC_AL: |
| flags |= SLI4_INIT_LINK_F_FCAL_ONLY; |
| if (speed == SLI4_LINK_SPEED_16G || |
| speed == SLI4_LINK_SPEED_32G) { |
| efc_log_info(sli4, "unsupported FC-AL speed %d\n", |
| speed); |
| init_link->flags0 = cpu_to_le32(flags); |
| return -EIO; |
| } |
| break; |
| case SLI4_READ_CFG_TOPO_NON_FC_AL: |
| flags |= SLI4_INIT_LINK_F_P2P_ONLY; |
| break; |
| default: |
| |
| efc_log_info(sli4, "unsupported topology %#x\n", sli4->topology); |
| |
| init_link->flags0 = cpu_to_le32(flags); |
| return -EIO; |
| } |
| |
| flags &= ~SLI4_INIT_LINK_F_UNFAIR; |
| flags &= ~SLI4_INIT_LINK_F_NO_LIRP; |
| flags &= ~SLI4_INIT_LINK_F_LOOP_VALID_CHK; |
| flags &= ~SLI4_INIT_LINK_F_NO_LISA; |
| flags &= ~SLI4_INIT_LINK_F_PICK_HI_ALPA; |
| init_link->flags0 = cpu_to_le32(flags); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_init_vfi(struct sli4 *sli4, void *buf, u16 vfi, u16 fcfi, u16 vpi) |
| { |
| struct sli4_cmd_init_vfi *init_vfi = buf; |
| u16 flags = 0; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| init_vfi->hdr.command = SLI4_MBX_CMD_INIT_VFI; |
| init_vfi->vfi = cpu_to_le16(vfi); |
| init_vfi->fcfi = cpu_to_le16(fcfi); |
| |
| /* |
| * If the VPI is valid, initialize it at the same time as |
| * the VFI |
| */ |
| if (vpi != U16_MAX) { |
| flags |= SLI4_INIT_VFI_FLAG_VP; |
| init_vfi->flags0_word = cpu_to_le16(flags); |
| init_vfi->vpi = cpu_to_le16(vpi); |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_init_vpi(struct sli4 *sli4, void *buf, u16 vpi, u16 vfi) |
| { |
| struct sli4_cmd_init_vpi *init_vpi = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| init_vpi->hdr.command = SLI4_MBX_CMD_INIT_VPI; |
| init_vpi->vpi = cpu_to_le16(vpi); |
| init_vpi->vfi = cpu_to_le16(vfi); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_post_xri(struct sli4 *sli4, void *buf, u16 xri_base, u16 xri_count) |
| { |
| struct sli4_cmd_post_xri *post_xri = buf; |
| u16 xri_count_flags = 0; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| post_xri->hdr.command = SLI4_MBX_CMD_POST_XRI; |
| post_xri->xri_base = cpu_to_le16(xri_base); |
| xri_count_flags = xri_count & SLI4_POST_XRI_COUNT; |
| xri_count_flags |= SLI4_POST_XRI_FLAG_ENX; |
| xri_count_flags |= SLI4_POST_XRI_FLAG_VAL; |
| post_xri->xri_count_flags = cpu_to_le16(xri_count_flags); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_release_xri(struct sli4 *sli4, void *buf, u8 num_xri) |
| { |
| struct sli4_cmd_release_xri *release_xri = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| release_xri->hdr.command = SLI4_MBX_CMD_RELEASE_XRI; |
| release_xri->xri_count_word = cpu_to_le16(num_xri & |
| SLI4_RELEASE_XRI_COUNT); |
| |
| return 0; |
| } |
| |
| static int |
| sli_cmd_read_config(struct sli4 *sli4, void *buf) |
| { |
| struct sli4_cmd_read_config *read_config = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| read_config->hdr.command = SLI4_MBX_CMD_READ_CONFIG; |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_read_nvparms(struct sli4 *sli4, void *buf) |
| { |
| struct sli4_cmd_read_nvparms *read_nvparms = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| read_nvparms->hdr.command = SLI4_MBX_CMD_READ_NVPARMS; |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_write_nvparms(struct sli4 *sli4, void *buf, u8 *wwpn, u8 *wwnn, |
| u8 hard_alpa, u32 preferred_d_id) |
| { |
| struct sli4_cmd_write_nvparms *write_nvparms = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| write_nvparms->hdr.command = SLI4_MBX_CMD_WRITE_NVPARMS; |
| memcpy(write_nvparms->wwpn, wwpn, 8); |
| memcpy(write_nvparms->wwnn, wwnn, 8); |
| |
| write_nvparms->hard_alpa_d_id = |
| cpu_to_le32((preferred_d_id << 8) | hard_alpa); |
| return 0; |
| } |
| |
| static int |
| sli_cmd_read_rev(struct sli4 *sli4, void *buf, struct efc_dma *vpd) |
| { |
| struct sli4_cmd_read_rev *read_rev = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| read_rev->hdr.command = SLI4_MBX_CMD_READ_REV; |
| |
| if (vpd && vpd->size) { |
| read_rev->flags0_word |= cpu_to_le16(SLI4_READ_REV_FLAG_VPD); |
| |
| read_rev->available_length_dword = |
| cpu_to_le32(vpd->size & |
| SLI4_READ_REV_AVAILABLE_LENGTH); |
| |
| read_rev->hostbuf.low = |
| cpu_to_le32(lower_32_bits(vpd->phys)); |
| read_rev->hostbuf.high = |
| cpu_to_le32(upper_32_bits(vpd->phys)); |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_read_sparm64(struct sli4 *sli4, void *buf, struct efc_dma *dma, u16 vpi) |
| { |
| struct sli4_cmd_read_sparm64 *read_sparm64 = buf; |
| |
| if (vpi == U16_MAX) { |
| efc_log_err(sli4, "special VPI not supported!!!\n"); |
| return -EIO; |
| } |
| |
| if (!dma || !dma->phys) { |
| efc_log_err(sli4, "bad DMA buffer\n"); |
| return -EIO; |
| } |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| read_sparm64->hdr.command = SLI4_MBX_CMD_READ_SPARM64; |
| |
| read_sparm64->bde_64.bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (dma->size & SLI4_BDE_LEN_MASK)); |
| read_sparm64->bde_64.u.data.low = |
| cpu_to_le32(lower_32_bits(dma->phys)); |
| read_sparm64->bde_64.u.data.high = |
| cpu_to_le32(upper_32_bits(dma->phys)); |
| |
| read_sparm64->vpi = cpu_to_le16(vpi); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_read_topology(struct sli4 *sli4, void *buf, struct efc_dma *dma) |
| { |
| struct sli4_cmd_read_topology *read_topo = buf; |
| |
| if (!dma || !dma->size) |
| return -EIO; |
| |
| if (dma->size < SLI4_MIN_LOOP_MAP_BYTES) { |
| efc_log_err(sli4, "loop map buffer too small %zx\n", dma->size); |
| return -EIO; |
| } |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| read_topo->hdr.command = SLI4_MBX_CMD_READ_TOPOLOGY; |
| |
| memset(dma->virt, 0, dma->size); |
| |
| read_topo->bde_loop_map.bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (dma->size & SLI4_BDE_LEN_MASK)); |
| read_topo->bde_loop_map.u.data.low = |
| cpu_to_le32(lower_32_bits(dma->phys)); |
| read_topo->bde_loop_map.u.data.high = |
| cpu_to_le32(upper_32_bits(dma->phys)); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_reg_fcfi(struct sli4 *sli4, void *buf, u16 index, |
| struct sli4_cmd_rq_cfg *rq_cfg) |
| { |
| struct sli4_cmd_reg_fcfi *reg_fcfi = buf; |
| u32 i; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| reg_fcfi->hdr.command = SLI4_MBX_CMD_REG_FCFI; |
| |
| reg_fcfi->fcf_index = cpu_to_le16(index); |
| |
| for (i = 0; i < SLI4_CMD_REG_FCFI_NUM_RQ_CFG; i++) { |
| switch (i) { |
| case 0: |
| reg_fcfi->rqid0 = rq_cfg[0].rq_id; |
| break; |
| case 1: |
| reg_fcfi->rqid1 = rq_cfg[1].rq_id; |
| break; |
| case 2: |
| reg_fcfi->rqid2 = rq_cfg[2].rq_id; |
| break; |
| case 3: |
| reg_fcfi->rqid3 = rq_cfg[3].rq_id; |
| break; |
| } |
| reg_fcfi->rq_cfg[i].r_ctl_mask = rq_cfg[i].r_ctl_mask; |
| reg_fcfi->rq_cfg[i].r_ctl_match = rq_cfg[i].r_ctl_match; |
| reg_fcfi->rq_cfg[i].type_mask = rq_cfg[i].type_mask; |
| reg_fcfi->rq_cfg[i].type_match = rq_cfg[i].type_match; |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_reg_fcfi_mrq(struct sli4 *sli4, void *buf, u8 mode, u16 fcf_index, |
| u8 rq_selection_policy, u8 mrq_bit_mask, u16 num_mrqs, |
| struct sli4_cmd_rq_cfg *rq_cfg) |
| { |
| struct sli4_cmd_reg_fcfi_mrq *reg_fcfi_mrq = buf; |
| u32 i; |
| u32 mrq_flags = 0; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| reg_fcfi_mrq->hdr.command = SLI4_MBX_CMD_REG_FCFI_MRQ; |
| if (mode == SLI4_CMD_REG_FCFI_SET_FCFI_MODE) { |
| reg_fcfi_mrq->fcf_index = cpu_to_le16(fcf_index); |
| goto done; |
| } |
| |
| reg_fcfi_mrq->dw8_vlan = cpu_to_le32(SLI4_REGFCFI_MRQ_MODE); |
| |
| for (i = 0; i < SLI4_CMD_REG_FCFI_NUM_RQ_CFG; i++) { |
| reg_fcfi_mrq->rq_cfg[i].r_ctl_mask = rq_cfg[i].r_ctl_mask; |
| reg_fcfi_mrq->rq_cfg[i].r_ctl_match = rq_cfg[i].r_ctl_match; |
| reg_fcfi_mrq->rq_cfg[i].type_mask = rq_cfg[i].type_mask; |
| reg_fcfi_mrq->rq_cfg[i].type_match = rq_cfg[i].type_match; |
| |
| switch (i) { |
| case 3: |
| reg_fcfi_mrq->rqid3 = rq_cfg[i].rq_id; |
| break; |
| case 2: |
| reg_fcfi_mrq->rqid2 = rq_cfg[i].rq_id; |
| break; |
| case 1: |
| reg_fcfi_mrq->rqid1 = rq_cfg[i].rq_id; |
| break; |
| case 0: |
| reg_fcfi_mrq->rqid0 = rq_cfg[i].rq_id; |
| break; |
| } |
| } |
| |
| mrq_flags = num_mrqs & SLI4_REGFCFI_MRQ_MASK_NUM_PAIRS; |
| mrq_flags |= (mrq_bit_mask << 8); |
| mrq_flags |= (rq_selection_policy << 12); |
| reg_fcfi_mrq->dw9_mrqflags = cpu_to_le32(mrq_flags); |
| done: |
| return 0; |
| } |
| |
| int |
| sli_cmd_reg_rpi(struct sli4 *sli4, void *buf, u32 rpi, u32 vpi, u32 fc_id, |
| struct efc_dma *dma, u8 update, u8 enable_t10_pi) |
| { |
| struct sli4_cmd_reg_rpi *reg_rpi = buf; |
| u32 rportid_flags = 0; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| reg_rpi->hdr.command = SLI4_MBX_CMD_REG_RPI; |
| |
| reg_rpi->rpi = cpu_to_le16(rpi); |
| |
| rportid_flags = fc_id & SLI4_REGRPI_REMOTE_N_PORTID; |
| |
| if (update) |
| rportid_flags |= SLI4_REGRPI_UPD; |
| else |
| rportid_flags &= ~SLI4_REGRPI_UPD; |
| |
| if (enable_t10_pi) |
| rportid_flags |= SLI4_REGRPI_ETOW; |
| else |
| rportid_flags &= ~SLI4_REGRPI_ETOW; |
| |
| reg_rpi->dw2_rportid_flags = cpu_to_le32(rportid_flags); |
| |
| reg_rpi->bde_64.bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (SLI4_REG_RPI_BUF_LEN & SLI4_BDE_LEN_MASK)); |
| reg_rpi->bde_64.u.data.low = |
| cpu_to_le32(lower_32_bits(dma->phys)); |
| reg_rpi->bde_64.u.data.high = |
| cpu_to_le32(upper_32_bits(dma->phys)); |
| |
| reg_rpi->vpi = cpu_to_le16(vpi); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_reg_vfi(struct sli4 *sli4, void *buf, size_t size, |
| u16 vfi, u16 fcfi, struct efc_dma dma, |
| u16 vpi, __be64 sli_wwpn, u32 fc_id) |
| { |
| struct sli4_cmd_reg_vfi *reg_vfi = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| reg_vfi->hdr.command = SLI4_MBX_CMD_REG_VFI; |
| |
| reg_vfi->vfi = cpu_to_le16(vfi); |
| |
| reg_vfi->fcfi = cpu_to_le16(fcfi); |
| |
| reg_vfi->sparm.bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (SLI4_REG_RPI_BUF_LEN & SLI4_BDE_LEN_MASK)); |
| reg_vfi->sparm.u.data.low = |
| cpu_to_le32(lower_32_bits(dma.phys)); |
| reg_vfi->sparm.u.data.high = |
| cpu_to_le32(upper_32_bits(dma.phys)); |
| |
| reg_vfi->e_d_tov = cpu_to_le32(sli4->e_d_tov); |
| reg_vfi->r_a_tov = cpu_to_le32(sli4->r_a_tov); |
| |
| reg_vfi->dw0w1_flags |= cpu_to_le16(SLI4_REGVFI_VP); |
| reg_vfi->vpi = cpu_to_le16(vpi); |
| memcpy(reg_vfi->wwpn, &sli_wwpn, sizeof(reg_vfi->wwpn)); |
| reg_vfi->dw10_lportid_flags = cpu_to_le32(fc_id); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_reg_vpi(struct sli4 *sli4, void *buf, u32 fc_id, __be64 sli_wwpn, |
| u16 vpi, u16 vfi, bool update) |
| { |
| struct sli4_cmd_reg_vpi *reg_vpi = buf; |
| u32 flags = 0; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| reg_vpi->hdr.command = SLI4_MBX_CMD_REG_VPI; |
| |
| flags = (fc_id & SLI4_REGVPI_LOCAL_N_PORTID); |
| if (update) |
| flags |= SLI4_REGVPI_UPD; |
| else |
| flags &= ~SLI4_REGVPI_UPD; |
| |
| reg_vpi->dw2_lportid_flags = cpu_to_le32(flags); |
| memcpy(reg_vpi->wwpn, &sli_wwpn, sizeof(reg_vpi->wwpn)); |
| reg_vpi->vpi = cpu_to_le16(vpi); |
| reg_vpi->vfi = cpu_to_le16(vfi); |
| |
| return 0; |
| } |
| |
| static int |
| sli_cmd_request_features(struct sli4 *sli4, void *buf, u32 features_mask, |
| bool query) |
| { |
| struct sli4_cmd_request_features *req_features = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| req_features->hdr.command = SLI4_MBX_CMD_RQST_FEATURES; |
| |
| if (query) |
| req_features->dw1_qry = cpu_to_le32(SLI4_REQFEAT_QRY); |
| |
| req_features->cmd = cpu_to_le32(features_mask); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_unreg_fcfi(struct sli4 *sli4, void *buf, u16 indicator) |
| { |
| struct sli4_cmd_unreg_fcfi *unreg_fcfi = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| unreg_fcfi->hdr.command = SLI4_MBX_CMD_UNREG_FCFI; |
| unreg_fcfi->fcfi = cpu_to_le16(indicator); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_unreg_rpi(struct sli4 *sli4, void *buf, u16 indicator, |
| enum sli4_resource which, u32 fc_id) |
| { |
| struct sli4_cmd_unreg_rpi *unreg_rpi = buf; |
| u32 flags = 0; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| unreg_rpi->hdr.command = SLI4_MBX_CMD_UNREG_RPI; |
| switch (which) { |
| case SLI4_RSRC_RPI: |
| flags |= SLI4_UNREG_RPI_II_RPI; |
| if (fc_id == U32_MAX) |
| break; |
| |
| flags |= SLI4_UNREG_RPI_DP; |
| unreg_rpi->dw2_dest_n_portid = |
| cpu_to_le32(fc_id & SLI4_UNREG_RPI_DEST_N_PORTID_MASK); |
| break; |
| case SLI4_RSRC_VPI: |
| flags |= SLI4_UNREG_RPI_II_VPI; |
| break; |
| case SLI4_RSRC_VFI: |
| flags |= SLI4_UNREG_RPI_II_VFI; |
| break; |
| case SLI4_RSRC_FCFI: |
| flags |= SLI4_UNREG_RPI_II_FCFI; |
| break; |
| default: |
| efc_log_info(sli4, "unknown type %#x\n", which); |
| return -EIO; |
| } |
| |
| unreg_rpi->dw1w1_flags = cpu_to_le16(flags); |
| unreg_rpi->index = cpu_to_le16(indicator); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_unreg_vfi(struct sli4 *sli4, void *buf, u16 index, u32 which) |
| { |
| struct sli4_cmd_unreg_vfi *unreg_vfi = buf; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| unreg_vfi->hdr.command = SLI4_MBX_CMD_UNREG_VFI; |
| switch (which) { |
| case SLI4_UNREG_TYPE_DOMAIN: |
| unreg_vfi->index = cpu_to_le16(index); |
| break; |
| case SLI4_UNREG_TYPE_FCF: |
| unreg_vfi->index = cpu_to_le16(index); |
| break; |
| case SLI4_UNREG_TYPE_ALL: |
| unreg_vfi->index = cpu_to_le16(U32_MAX); |
| break; |
| default: |
| return -EIO; |
| } |
| |
| if (which != SLI4_UNREG_TYPE_DOMAIN) |
| unreg_vfi->dw2_flags = cpu_to_le16(SLI4_UNREG_VFI_II_FCFI); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_unreg_vpi(struct sli4 *sli4, void *buf, u16 indicator, u32 which) |
| { |
| struct sli4_cmd_unreg_vpi *unreg_vpi = buf; |
| u32 flags = 0; |
| |
| memset(buf, 0, SLI4_BMBX_SIZE); |
| |
| unreg_vpi->hdr.command = SLI4_MBX_CMD_UNREG_VPI; |
| unreg_vpi->index = cpu_to_le16(indicator); |
| switch (which) { |
| case SLI4_UNREG_TYPE_PORT: |
| flags |= SLI4_UNREG_VPI_II_VPI; |
| break; |
| case SLI4_UNREG_TYPE_DOMAIN: |
| flags |= SLI4_UNREG_VPI_II_VFI; |
| break; |
| case SLI4_UNREG_TYPE_FCF: |
| flags |= SLI4_UNREG_VPI_II_FCFI; |
| break; |
| case SLI4_UNREG_TYPE_ALL: |
| /* override indicator */ |
| unreg_vpi->index = cpu_to_le16(U32_MAX); |
| flags |= SLI4_UNREG_VPI_II_FCFI; |
| break; |
| default: |
| return -EIO; |
| } |
| |
| unreg_vpi->dw2w0_flags = cpu_to_le16(flags); |
| return 0; |
| } |
| |
| static int |
| sli_cmd_common_modify_eq_delay(struct sli4 *sli4, void *buf, |
| struct sli4_queue *q, int num_q, u32 shift, |
| u32 delay_mult) |
| { |
| struct sli4_rqst_cmn_modify_eq_delay *req = NULL; |
| int i; |
| |
| req = sli_config_cmd_init(sli4, buf, |
| SLI4_CFG_PYLD_LENGTH(cmn_modify_eq_delay), NULL); |
| if (!req) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&req->hdr, SLI4_CMN_MODIFY_EQ_DELAY, |
| SLI4_SUBSYSTEM_COMMON, CMD_V0, |
| SLI4_RQST_PYLD_LEN(cmn_modify_eq_delay)); |
| req->num_eq = cpu_to_le32(num_q); |
| |
| for (i = 0; i < num_q; i++) { |
| req->eq_delay_record[i].eq_id = cpu_to_le32(q[i].id); |
| req->eq_delay_record[i].phase = cpu_to_le32(shift); |
| req->eq_delay_record[i].delay_multiplier = |
| cpu_to_le32(delay_mult); |
| } |
| |
| return 0; |
| } |
| |
| void |
| sli4_cmd_lowlevel_set_watchdog(struct sli4 *sli4, void *buf, |
| size_t size, u16 timeout) |
| { |
| struct sli4_rqst_lowlevel_set_watchdog *req = NULL; |
| |
| req = sli_config_cmd_init(sli4, buf, |
| SLI4_CFG_PYLD_LENGTH(lowlevel_set_watchdog), NULL); |
| if (!req) |
| return; |
| |
| sli_cmd_fill_hdr(&req->hdr, SLI4_OPC_LOWLEVEL_SET_WATCHDOG, |
| SLI4_SUBSYSTEM_LOWLEVEL, CMD_V0, |
| SLI4_RQST_PYLD_LEN(lowlevel_set_watchdog)); |
| req->watchdog_timeout = cpu_to_le16(timeout); |
| } |
| |
| static int |
| sli_cmd_common_get_cntl_attributes(struct sli4 *sli4, void *buf, |
| struct efc_dma *dma) |
| { |
| struct sli4_rqst_hdr *hdr = NULL; |
| |
| hdr = sli_config_cmd_init(sli4, buf, SLI4_RQST_CMDSZ(hdr), dma); |
| if (!hdr) |
| return -EIO; |
| |
| hdr->opcode = SLI4_CMN_GET_CNTL_ATTRIBUTES; |
| hdr->subsystem = SLI4_SUBSYSTEM_COMMON; |
| hdr->request_length = cpu_to_le32(dma->size); |
| |
| return 0; |
| } |
| |
| static int |
| sli_cmd_common_get_cntl_addl_attributes(struct sli4 *sli4, void *buf, |
| struct efc_dma *dma) |
| { |
| struct sli4_rqst_hdr *hdr = NULL; |
| |
| hdr = sli_config_cmd_init(sli4, buf, SLI4_RQST_CMDSZ(hdr), dma); |
| if (!hdr) |
| return -EIO; |
| |
| hdr->opcode = SLI4_CMN_GET_CNTL_ADDL_ATTRS; |
| hdr->subsystem = SLI4_SUBSYSTEM_COMMON; |
| hdr->request_length = cpu_to_le32(dma->size); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_common_nop(struct sli4 *sli4, void *buf, uint64_t context) |
| { |
| struct sli4_rqst_cmn_nop *nop = NULL; |
| |
| nop = sli_config_cmd_init(sli4, buf, SLI4_CFG_PYLD_LENGTH(cmn_nop), |
| NULL); |
| if (!nop) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&nop->hdr, SLI4_CMN_NOP, SLI4_SUBSYSTEM_COMMON, |
| CMD_V0, SLI4_RQST_PYLD_LEN(cmn_nop)); |
| |
| memcpy(&nop->context, &context, sizeof(context)); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_common_get_resource_extent_info(struct sli4 *sli4, void *buf, u16 rtype) |
| { |
| struct sli4_rqst_cmn_get_resource_extent_info *ext = NULL; |
| |
| ext = sli_config_cmd_init(sli4, buf, |
| SLI4_RQST_CMDSZ(cmn_get_resource_extent_info), NULL); |
| if (!ext) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&ext->hdr, SLI4_CMN_GET_RSC_EXTENT_INFO, |
| SLI4_SUBSYSTEM_COMMON, CMD_V0, |
| SLI4_RQST_PYLD_LEN(cmn_get_resource_extent_info)); |
| |
| ext->resource_type = cpu_to_le16(rtype); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_common_get_sli4_parameters(struct sli4 *sli4, void *buf) |
| { |
| struct sli4_rqst_hdr *hdr = NULL; |
| |
| hdr = sli_config_cmd_init(sli4, buf, |
| SLI4_CFG_PYLD_LENGTH(cmn_get_sli4_params), NULL); |
| if (!hdr) |
| return -EIO; |
| |
| hdr->opcode = SLI4_CMN_GET_SLI4_PARAMS; |
| hdr->subsystem = SLI4_SUBSYSTEM_COMMON; |
| hdr->request_length = SLI4_RQST_PYLD_LEN(cmn_get_sli4_params); |
| |
| return 0; |
| } |
| |
| static int |
| sli_cmd_common_get_port_name(struct sli4 *sli4, void *buf) |
| { |
| struct sli4_rqst_cmn_get_port_name *pname; |
| |
| pname = sli_config_cmd_init(sli4, buf, |
| SLI4_CFG_PYLD_LENGTH(cmn_get_port_name), NULL); |
| if (!pname) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&pname->hdr, SLI4_CMN_GET_PORT_NAME, |
| SLI4_SUBSYSTEM_COMMON, CMD_V1, |
| SLI4_RQST_PYLD_LEN(cmn_get_port_name)); |
| |
| /* Set the port type value (ethernet=0, FC=1) for V1 commands */ |
| pname->port_type = SLI4_PORT_TYPE_FC; |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_common_write_object(struct sli4 *sli4, void *buf, u16 noc, |
| u16 eof, u32 desired_write_length, |
| u32 offset, char *obj_name, |
| struct efc_dma *dma) |
| { |
| struct sli4_rqst_cmn_write_object *wr_obj = NULL; |
| struct sli4_bde *bde; |
| u32 dwflags = 0; |
| |
| wr_obj = sli_config_cmd_init(sli4, buf, |
| SLI4_RQST_CMDSZ(cmn_write_object) + sizeof(*bde), NULL); |
| if (!wr_obj) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&wr_obj->hdr, SLI4_CMN_WRITE_OBJECT, |
| SLI4_SUBSYSTEM_COMMON, CMD_V0, |
| SLI4_RQST_PYLD_LEN_VAR(cmn_write_object, sizeof(*bde))); |
| |
| if (noc) |
| dwflags |= SLI4_RQ_DES_WRITE_LEN_NOC; |
| if (eof) |
| dwflags |= SLI4_RQ_DES_WRITE_LEN_EOF; |
| dwflags |= (desired_write_length & SLI4_RQ_DES_WRITE_LEN); |
| |
| wr_obj->desired_write_len_dword = cpu_to_le32(dwflags); |
| |
| wr_obj->write_offset = cpu_to_le32(offset); |
| strncpy(wr_obj->object_name, obj_name, sizeof(wr_obj->object_name) - 1); |
| wr_obj->host_buffer_descriptor_count = cpu_to_le32(1); |
| |
| bde = (struct sli4_bde *)wr_obj->host_buffer_descriptor; |
| |
| /* Setup to transfer xfer_size bytes to device */ |
| bde->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (desired_write_length & SLI4_BDE_LEN_MASK)); |
| bde->u.data.low = cpu_to_le32(lower_32_bits(dma->phys)); |
| bde->u.data.high = cpu_to_le32(upper_32_bits(dma->phys)); |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_common_delete_object(struct sli4 *sli4, void *buf, char *obj_name) |
| { |
| struct sli4_rqst_cmn_delete_object *req = NULL; |
| |
| req = sli_config_cmd_init(sli4, buf, |
| SLI4_RQST_CMDSZ(cmn_delete_object), NULL); |
| if (!req) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&req->hdr, SLI4_CMN_DELETE_OBJECT, |
| SLI4_SUBSYSTEM_COMMON, CMD_V0, |
| SLI4_RQST_PYLD_LEN(cmn_delete_object)); |
| |
| strncpy(req->object_name, obj_name, sizeof(req->object_name) - 1); |
| return 0; |
| } |
| |
| int |
| sli_cmd_common_read_object(struct sli4 *sli4, void *buf, u32 desired_read_len, |
| u32 offset, char *obj_name, struct efc_dma *dma) |
| { |
| struct sli4_rqst_cmn_read_object *rd_obj = NULL; |
| struct sli4_bde *bde; |
| |
| rd_obj = sli_config_cmd_init(sli4, buf, |
| SLI4_RQST_CMDSZ(cmn_read_object) + sizeof(*bde), NULL); |
| if (!rd_obj) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&rd_obj->hdr, SLI4_CMN_READ_OBJECT, |
| SLI4_SUBSYSTEM_COMMON, CMD_V0, |
| SLI4_RQST_PYLD_LEN_VAR(cmn_read_object, sizeof(*bde))); |
| rd_obj->desired_read_length_dword = |
| cpu_to_le32(desired_read_len & SLI4_REQ_DESIRE_READLEN); |
| |
| rd_obj->read_offset = cpu_to_le32(offset); |
| strncpy(rd_obj->object_name, obj_name, sizeof(rd_obj->object_name) - 1); |
| rd_obj->host_buffer_descriptor_count = cpu_to_le32(1); |
| |
| bde = (struct sli4_bde *)rd_obj->host_buffer_descriptor; |
| |
| /* Setup to transfer xfer_size bytes to device */ |
| bde->bde_type_buflen = |
| cpu_to_le32((SLI4_BDE_TYPE_VAL(64)) | |
| (desired_read_len & SLI4_BDE_LEN_MASK)); |
| if (dma) { |
| bde->u.data.low = cpu_to_le32(lower_32_bits(dma->phys)); |
| bde->u.data.high = cpu_to_le32(upper_32_bits(dma->phys)); |
| } else { |
| bde->u.data.low = 0; |
| bde->u.data.high = 0; |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_dmtf_exec_clp_cmd(struct sli4 *sli4, void *buf, struct efc_dma *cmd, |
| struct efc_dma *resp) |
| { |
| struct sli4_rqst_dmtf_exec_clp_cmd *clp_cmd = NULL; |
| |
| clp_cmd = sli_config_cmd_init(sli4, buf, |
| SLI4_RQST_CMDSZ(dmtf_exec_clp_cmd), NULL); |
| if (!clp_cmd) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&clp_cmd->hdr, DMTF_EXEC_CLP_CMD, SLI4_SUBSYSTEM_DMTF, |
| CMD_V0, SLI4_RQST_PYLD_LEN(dmtf_exec_clp_cmd)); |
| |
| clp_cmd->cmd_buf_length = cpu_to_le32(cmd->size); |
| clp_cmd->cmd_buf_addr_low = cpu_to_le32(lower_32_bits(cmd->phys)); |
| clp_cmd->cmd_buf_addr_high = cpu_to_le32(upper_32_bits(cmd->phys)); |
| clp_cmd->resp_buf_length = cpu_to_le32(resp->size); |
| clp_cmd->resp_buf_addr_low = cpu_to_le32(lower_32_bits(resp->phys)); |
| clp_cmd->resp_buf_addr_high = cpu_to_le32(upper_32_bits(resp->phys)); |
| return 0; |
| } |
| |
| int |
| sli_cmd_common_set_dump_location(struct sli4 *sli4, void *buf, bool query, |
| bool is_buffer_list, |
| struct efc_dma *buffer, u8 fdb) |
| { |
| struct sli4_rqst_cmn_set_dump_location *set_dump_loc = NULL; |
| u32 buffer_length_flag = 0; |
| |
| set_dump_loc = sli_config_cmd_init(sli4, buf, |
| SLI4_RQST_CMDSZ(cmn_set_dump_location), NULL); |
| if (!set_dump_loc) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&set_dump_loc->hdr, SLI4_CMN_SET_DUMP_LOCATION, |
| SLI4_SUBSYSTEM_COMMON, CMD_V0, |
| SLI4_RQST_PYLD_LEN(cmn_set_dump_location)); |
| |
| if (is_buffer_list) |
| buffer_length_flag |= SLI4_CMN_SET_DUMP_BLP; |
| |
| if (query) |
| buffer_length_flag |= SLI4_CMN_SET_DUMP_QRY; |
| |
| if (fdb) |
| buffer_length_flag |= SLI4_CMN_SET_DUMP_FDB; |
| |
| if (buffer) { |
| set_dump_loc->buf_addr_low = |
| cpu_to_le32(lower_32_bits(buffer->phys)); |
| set_dump_loc->buf_addr_high = |
| cpu_to_le32(upper_32_bits(buffer->phys)); |
| |
| buffer_length_flag |= |
| buffer->len & SLI4_CMN_SET_DUMP_BUFFER_LEN; |
| } else { |
| set_dump_loc->buf_addr_low = 0; |
| set_dump_loc->buf_addr_high = 0; |
| set_dump_loc->buffer_length_dword = 0; |
| } |
| set_dump_loc->buffer_length_dword = cpu_to_le32(buffer_length_flag); |
| return 0; |
| } |
| |
| int |
| sli_cmd_common_set_features(struct sli4 *sli4, void *buf, u32 feature, |
| u32 param_len, void *parameter) |
| { |
| struct sli4_rqst_cmn_set_features *cmd = NULL; |
| |
| cmd = sli_config_cmd_init(sli4, buf, |
| SLI4_RQST_CMDSZ(cmn_set_features), NULL); |
| if (!cmd) |
| return -EIO; |
| |
| sli_cmd_fill_hdr(&cmd->hdr, SLI4_CMN_SET_FEATURES, |
| SLI4_SUBSYSTEM_COMMON, CMD_V0, |
| SLI4_RQST_PYLD_LEN(cmn_set_features)); |
| |
| cmd->feature = cpu_to_le32(feature); |
| cmd->param_len = cpu_to_le32(param_len); |
| memcpy(cmd->params, parameter, param_len); |
| |
| return 0; |
| } |
| |
| int |
| sli_cqe_mq(struct sli4 *sli4, void *buf) |
| { |
| struct sli4_mcqe *mcqe = buf; |
| u32 dwflags = le32_to_cpu(mcqe->dw3_flags); |
| /* |
| * Firmware can split mbx completions into two MCQEs: first with only |
| * the "consumed" bit set and a second with the "complete" bit set. |
| * Thus, ignore MCQE unless "complete" is set. |
| */ |
| if (!(dwflags & SLI4_MCQE_COMPLETED)) |
| return SLI4_MCQE_STATUS_NOT_COMPLETED; |
| |
| if (le16_to_cpu(mcqe->completion_status)) { |
| efc_log_info(sli4, "status(st=%#x ext=%#x con=%d cmp=%d ae=%d val=%d)\n", |
| le16_to_cpu(mcqe->completion_status), |
| le16_to_cpu(mcqe->extended_status), |
| (dwflags & SLI4_MCQE_CONSUMED), |
| (dwflags & SLI4_MCQE_COMPLETED), |
| (dwflags & SLI4_MCQE_AE), |
| (dwflags & SLI4_MCQE_VALID)); |
| } |
| |
| return le16_to_cpu(mcqe->completion_status); |
| } |
| |
| int |
| sli_cqe_async(struct sli4 *sli4, void *buf) |
| { |
| struct sli4_acqe *acqe = buf; |
| int rc = -EIO; |
| |
| if (!buf) { |
| efc_log_err(sli4, "bad parameter sli4=%p buf=%p\n", sli4, buf); |
| return -EIO; |
| } |
| |
| switch (acqe->event_code) { |
| case SLI4_ACQE_EVENT_CODE_LINK_STATE: |
| efc_log_info(sli4, "Unsupported by FC link, evt code:%#x\n", |
| acqe->event_code); |
| break; |
| case SLI4_ACQE_EVENT_CODE_GRP_5: |
| efc_log_info(sli4, "ACQE GRP5\n"); |
| break; |
| case SLI4_ACQE_EVENT_CODE_SLI_PORT_EVENT: |
| efc_log_info(sli4, "ACQE SLI Port, type=0x%x, data1,2=0x%08x,0x%08x\n", |
| acqe->event_type, |
| le32_to_cpu(acqe->event_data[0]), |
| le32_to_cpu(acqe->event_data[1])); |
| break; |
| case SLI4_ACQE_EVENT_CODE_FC_LINK_EVENT: |
| rc = sli_fc_process_link_attention(sli4, buf); |
| break; |
| default: |
| efc_log_info(sli4, "ACQE unknown=%#x\n", acqe->event_code); |
| } |
| |
| return rc; |
| } |
| |
| bool |
| sli_fw_ready(struct sli4 *sli4) |
| { |
| u32 val; |
| |
| /* Determine if the chip FW is in a ready state */ |
| val = sli_reg_read_status(sli4); |
| return (val & SLI4_PORT_STATUS_RDY) ? 1 : 0; |
| } |
| |
| static bool |
| sli_wait_for_fw_ready(struct sli4 *sli4, u32 timeout_ms) |
| { |
| unsigned long end; |
| |
| end = jiffies + msecs_to_jiffies(timeout_ms); |
| |
| do { |
| if (sli_fw_ready(sli4)) |
| return true; |
| |
| usleep_range(1000, 2000); |
| } while (time_before(jiffies, end)); |
| |
| return false; |
| } |
| |
| static bool |
| sli_sliport_reset(struct sli4 *sli4) |
| { |
| bool rc; |
| u32 val; |
| |
| val = SLI4_PORT_CTRL_IP; |
| /* Initialize port, endian */ |
| writel(val, (sli4->reg[0] + SLI4_PORT_CTRL_REG)); |
| |
| rc = sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC); |
| if (!rc) |
| efc_log_crit(sli4, "port failed to become ready after initialization\n"); |
| |
| return rc; |
| } |
| |
| static bool |
| sli_fw_init(struct sli4 *sli4) |
| { |
| /* |
| * Is firmware ready for operation? |
| */ |
| if (!sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC)) { |
| efc_log_crit(sli4, "FW status is NOT ready\n"); |
| return false; |
| } |
| |
| /* |
| * Reset port to a known state |
| */ |
| return sli_sliport_reset(sli4); |
| } |
| |
| static int |
| sli_request_features(struct sli4 *sli4, u32 *features, bool query) |
| { |
| struct sli4_cmd_request_features *req_features = sli4->bmbx.virt; |
| |
| if (sli_cmd_request_features(sli4, sli4->bmbx.virt, *features, query)) { |
| efc_log_err(sli4, "bad REQUEST_FEATURES write\n"); |
| return -EIO; |
| } |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "bootstrap mailbox write fail\n"); |
| return -EIO; |
| } |
| |
| if (le16_to_cpu(req_features->hdr.status)) { |
| efc_log_err(sli4, "REQUEST_FEATURES bad status %#x\n", |
| le16_to_cpu(req_features->hdr.status)); |
| return -EIO; |
| } |
| |
| *features = le32_to_cpu(req_features->resp); |
| return 0; |
| } |
| |
| void |
| sli_calc_max_qentries(struct sli4 *sli4) |
| { |
| enum sli4_qtype q; |
| u32 qentries; |
| |
| for (q = SLI4_QTYPE_EQ; q < SLI4_QTYPE_MAX; q++) { |
| sli4->qinfo.max_qentries[q] = |
| sli_convert_mask_to_count(sli4->qinfo.count_method[q], |
| sli4->qinfo.count_mask[q]); |
| } |
| |
| /* single, contiguous DMA allocations will be called for each queue |
| * of size (max_qentries * queue entry size); since these can be large, |
| * check against the OS max DMA allocation size |
| */ |
| for (q = SLI4_QTYPE_EQ; q < SLI4_QTYPE_MAX; q++) { |
| qentries = sli4->qinfo.max_qentries[q]; |
| |
| efc_log_info(sli4, "[%s]: max_qentries from %d to %d\n", |
| SLI4_QNAME[q], |
| sli4->qinfo.max_qentries[q], qentries); |
| sli4->qinfo.max_qentries[q] = qentries; |
| } |
| } |
| |
| static int |
| sli_get_read_config(struct sli4 *sli4) |
| { |
| struct sli4_rsp_read_config *conf = sli4->bmbx.virt; |
| u32 i, total; |
| u32 *base; |
| |
| if (sli_cmd_read_config(sli4, sli4->bmbx.virt)) { |
| efc_log_err(sli4, "bad READ_CONFIG write\n"); |
| return -EIO; |
| } |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "bootstrap mailbox fail (READ_CONFIG)\n"); |
| return -EIO; |
| } |
| |
| if (le16_to_cpu(conf->hdr.status)) { |
| efc_log_err(sli4, "READ_CONFIG bad status %#x\n", |
| le16_to_cpu(conf->hdr.status)); |
| return -EIO; |
| } |
| |
| sli4->params.has_extents = |
| le32_to_cpu(conf->ext_dword) & SLI4_READ_CFG_RESP_RESOURCE_EXT; |
| if (sli4->params.has_extents) { |
| efc_log_err(sli4, "extents not supported\n"); |
| return -EIO; |
| } |
| |
| base = sli4->ext[0].base; |
| if (!base) { |
| int size = SLI4_RSRC_MAX * sizeof(u32); |
| |
| base = kzalloc(size, GFP_KERNEL); |
| if (!base) |
| return -EIO; |
| } |
| |
| for (i = 0; i < SLI4_RSRC_MAX; i++) { |
| sli4->ext[i].number = 1; |
| sli4->ext[i].n_alloc = 0; |
| sli4->ext[i].base = &base[i]; |
| } |
| |
| sli4->ext[SLI4_RSRC_VFI].base[0] = le16_to_cpu(conf->vfi_base); |
| sli4->ext[SLI4_RSRC_VFI].size = le16_to_cpu(conf->vfi_count); |
| |
| sli4->ext[SLI4_RSRC_VPI].base[0] = le16_to_cpu(conf->vpi_base); |
| sli4->ext[SLI4_RSRC_VPI].size = le16_to_cpu(conf->vpi_count); |
| |
| sli4->ext[SLI4_RSRC_RPI].base[0] = le16_to_cpu(conf->rpi_base); |
| sli4->ext[SLI4_RSRC_RPI].size = le16_to_cpu(conf->rpi_count); |
| |
| sli4->ext[SLI4_RSRC_XRI].base[0] = le16_to_cpu(conf->xri_base); |
| sli4->ext[SLI4_RSRC_XRI].size = le16_to_cpu(conf->xri_count); |
| |
| sli4->ext[SLI4_RSRC_FCFI].base[0] = 0; |
| sli4->ext[SLI4_RSRC_FCFI].size = le16_to_cpu(conf->fcfi_count); |
| |
| for (i = 0; i < SLI4_RSRC_MAX; i++) { |
| total = sli4->ext[i].number * sli4->ext[i].size; |
| sli4->ext[i].use_map = bitmap_zalloc(total, GFP_KERNEL); |
| if (!sli4->ext[i].use_map) { |
| efc_log_err(sli4, "bitmap memory allocation failed %d\n", |
| i); |
| return -EIO; |
| } |
| sli4->ext[i].map_size = total; |
| } |
| |
| sli4->topology = (le32_to_cpu(conf->topology_dword) & |
| SLI4_READ_CFG_RESP_TOPOLOGY) >> 24; |
| switch (sli4->topology) { |
| case SLI4_READ_CFG_TOPO_FC: |
| efc_log_info(sli4, "FC (unknown)\n"); |
| break; |
| case SLI4_READ_CFG_TOPO_NON_FC_AL: |
| efc_log_info(sli4, "FC (direct attach)\n"); |
| break; |
| case SLI4_READ_CFG_TOPO_FC_AL: |
| efc_log_info(sli4, "FC (arbitrated loop)\n"); |
| break; |
| default: |
| efc_log_info(sli4, "bad topology %#x\n", sli4->topology); |
| } |
| |
| sli4->e_d_tov = le16_to_cpu(conf->e_d_tov); |
| sli4->r_a_tov = le16_to_cpu(conf->r_a_tov); |
| |
| sli4->link_module_type = le16_to_cpu(conf->lmt); |
| |
| sli4->qinfo.max_qcount[SLI4_QTYPE_EQ] = le16_to_cpu(conf->eq_count); |
| sli4->qinfo.max_qcount[SLI4_QTYPE_CQ] = le16_to_cpu(conf->cq_count); |
| sli4->qinfo.max_qcount[SLI4_QTYPE_WQ] = le16_to_cpu(conf->wq_count); |
| sli4->qinfo.max_qcount[SLI4_QTYPE_RQ] = le16_to_cpu(conf->rq_count); |
| |
| /* |
| * READ_CONFIG doesn't give the max number of MQ. Applications |
| * will typically want 1, but we may need another at some future |
| * date. Dummy up a "max" MQ count here. |
| */ |
| sli4->qinfo.max_qcount[SLI4_QTYPE_MQ] = SLI4_USER_MQ_COUNT; |
| return 0; |
| } |
| |
| static int |
| sli_get_sli4_parameters(struct sli4 *sli4) |
| { |
| struct sli4_rsp_cmn_get_sli4_params *parms; |
| u32 dw_loopback; |
| u32 dw_eq_pg_cnt; |
| u32 dw_cq_pg_cnt; |
| u32 dw_mq_pg_cnt; |
| u32 dw_wq_pg_cnt; |
| u32 dw_rq_pg_cnt; |
| u32 dw_sgl_pg_cnt; |
| |
| if (sli_cmd_common_get_sli4_parameters(sli4, sli4->bmbx.virt)) |
| return -EIO; |
| |
| parms = (struct sli4_rsp_cmn_get_sli4_params *) |
| (((u8 *)sli4->bmbx.virt) + |
| offsetof(struct sli4_cmd_sli_config, payload.embed)); |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "bootstrap mailbox write fail\n"); |
| return -EIO; |
| } |
| |
| if (parms->hdr.status) { |
| efc_log_err(sli4, "COMMON_GET_SLI4_PARAMETERS bad status %#x", |
| parms->hdr.status); |
| efc_log_err(sli4, "additional status %#x\n", |
| parms->hdr.additional_status); |
| return -EIO; |
| } |
| |
| dw_loopback = le32_to_cpu(parms->dw16_loopback_scope); |
| dw_eq_pg_cnt = le32_to_cpu(parms->dw6_eq_page_cnt); |
| dw_cq_pg_cnt = le32_to_cpu(parms->dw8_cq_page_cnt); |
| dw_mq_pg_cnt = le32_to_cpu(parms->dw10_mq_page_cnt); |
| dw_wq_pg_cnt = le32_to_cpu(parms->dw12_wq_page_cnt); |
| dw_rq_pg_cnt = le32_to_cpu(parms->dw14_rq_page_cnt); |
| |
| sli4->params.auto_reg = (dw_loopback & SLI4_PARAM_AREG); |
| sli4->params.auto_xfer_rdy = (dw_loopback & SLI4_PARAM_AGXF); |
| sli4->params.hdr_template_req = (dw_loopback & SLI4_PARAM_HDRR); |
| sli4->params.t10_dif_inline_capable = (dw_loopback & SLI4_PARAM_TIMM); |
| sli4->params.t10_dif_separate_capable = (dw_loopback & SLI4_PARAM_TSMM); |
| |
| sli4->params.mq_create_version = GET_Q_CREATE_VERSION(dw_mq_pg_cnt); |
| sli4->params.cq_create_version = GET_Q_CREATE_VERSION(dw_cq_pg_cnt); |
| |
| sli4->rq_min_buf_size = le16_to_cpu(parms->min_rq_buffer_size); |
| sli4->rq_max_buf_size = le32_to_cpu(parms->max_rq_buffer_size); |
| |
| sli4->qinfo.qpage_count[SLI4_QTYPE_EQ] = |
| (dw_eq_pg_cnt & SLI4_PARAM_EQ_PAGE_CNT_MASK); |
| sli4->qinfo.qpage_count[SLI4_QTYPE_CQ] = |
| (dw_cq_pg_cnt & SLI4_PARAM_CQ_PAGE_CNT_MASK); |
| sli4->qinfo.qpage_count[SLI4_QTYPE_MQ] = |
| (dw_mq_pg_cnt & SLI4_PARAM_MQ_PAGE_CNT_MASK); |
| sli4->qinfo.qpage_count[SLI4_QTYPE_WQ] = |
| (dw_wq_pg_cnt & SLI4_PARAM_WQ_PAGE_CNT_MASK); |
| sli4->qinfo.qpage_count[SLI4_QTYPE_RQ] = |
| (dw_rq_pg_cnt & SLI4_PARAM_RQ_PAGE_CNT_MASK); |
| |
| /* save count methods and masks for each queue type */ |
| |
| sli4->qinfo.count_mask[SLI4_QTYPE_EQ] = |
| le16_to_cpu(parms->eqe_count_mask); |
| sli4->qinfo.count_method[SLI4_QTYPE_EQ] = |
| GET_Q_CNT_METHOD(dw_eq_pg_cnt); |
| |
| sli4->qinfo.count_mask[SLI4_QTYPE_CQ] = |
| le16_to_cpu(parms->cqe_count_mask); |
| sli4->qinfo.count_method[SLI4_QTYPE_CQ] = |
| GET_Q_CNT_METHOD(dw_cq_pg_cnt); |
| |
| sli4->qinfo.count_mask[SLI4_QTYPE_MQ] = |
| le16_to_cpu(parms->mqe_count_mask); |
| sli4->qinfo.count_method[SLI4_QTYPE_MQ] = |
| GET_Q_CNT_METHOD(dw_mq_pg_cnt); |
| |
| sli4->qinfo.count_mask[SLI4_QTYPE_WQ] = |
| le16_to_cpu(parms->wqe_count_mask); |
| sli4->qinfo.count_method[SLI4_QTYPE_WQ] = |
| GET_Q_CNT_METHOD(dw_wq_pg_cnt); |
| |
| sli4->qinfo.count_mask[SLI4_QTYPE_RQ] = |
| le16_to_cpu(parms->rqe_count_mask); |
| sli4->qinfo.count_method[SLI4_QTYPE_RQ] = |
| GET_Q_CNT_METHOD(dw_rq_pg_cnt); |
| |
| /* now calculate max queue entries */ |
| sli_calc_max_qentries(sli4); |
| |
| dw_sgl_pg_cnt = le32_to_cpu(parms->dw18_sgl_page_cnt); |
| |
| /* max # of pages */ |
| sli4->max_sgl_pages = (dw_sgl_pg_cnt & SLI4_PARAM_SGL_PAGE_CNT_MASK); |
| |
| /* bit map of available sizes */ |
| sli4->sgl_page_sizes = (dw_sgl_pg_cnt & |
| SLI4_PARAM_SGL_PAGE_SZS_MASK) >> 8; |
| /* ignore HLM here. Use value from REQUEST_FEATURES */ |
| sli4->sge_supported_length = le32_to_cpu(parms->sge_supported_length); |
| sli4->params.sgl_pre_reg_required = (dw_loopback & SLI4_PARAM_SGLR); |
| /* default to using pre-registered SGL's */ |
| sli4->params.sgl_pre_registered = true; |
| |
| sli4->params.perf_hint = dw_loopback & SLI4_PARAM_PHON; |
| sli4->params.perf_wq_id_association = (dw_loopback & SLI4_PARAM_PHWQ); |
| |
| sli4->rq_batch = (le16_to_cpu(parms->dw15w1_rq_db_window) & |
| SLI4_PARAM_RQ_DB_WINDOW_MASK) >> 12; |
| |
| /* Use the highest available WQE size. */ |
| if (((dw_wq_pg_cnt & SLI4_PARAM_WQE_SZS_MASK) >> 8) & |
| SLI4_128BYTE_WQE_SUPPORT) |
| sli4->wqe_size = SLI4_WQE_EXT_BYTES; |
| else |
| sli4->wqe_size = SLI4_WQE_BYTES; |
| |
| return 0; |
| } |
| |
| static int |
| sli_get_ctrl_attributes(struct sli4 *sli4) |
| { |
| struct sli4_rsp_cmn_get_cntl_attributes *attr; |
| struct sli4_rsp_cmn_get_cntl_addl_attributes *add_attr; |
| struct efc_dma data; |
| u32 psize; |
| |
| /* |
| * Issue COMMON_GET_CNTL_ATTRIBUTES to get port_number. Temporarily |
| * uses VPD DMA buffer as the response won't fit in the embedded |
| * buffer. |
| */ |
| memset(sli4->vpd_data.virt, 0, sli4->vpd_data.size); |
| if (sli_cmd_common_get_cntl_attributes(sli4, sli4->bmbx.virt, |
| &sli4->vpd_data)) { |
| efc_log_err(sli4, "bad COMMON_GET_CNTL_ATTRIBUTES write\n"); |
| return -EIO; |
| } |
| |
| attr = sli4->vpd_data.virt; |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "bootstrap mailbox write fail\n"); |
| return -EIO; |
| } |
| |
| if (attr->hdr.status) { |
| efc_log_err(sli4, "COMMON_GET_CNTL_ATTRIBUTES bad status %#x", |
| attr->hdr.status); |
| efc_log_err(sli4, "additional status %#x\n", |
| attr->hdr.additional_status); |
| return -EIO; |
| } |
| |
| sli4->port_number = attr->port_num_type_flags & SLI4_CNTL_ATTR_PORTNUM; |
| |
| memcpy(sli4->bios_version_string, attr->bios_version_str, |
| sizeof(sli4->bios_version_string)); |
| |
| /* get additional attributes */ |
| psize = sizeof(struct sli4_rsp_cmn_get_cntl_addl_attributes); |
| data.size = psize; |
| data.virt = dma_alloc_coherent(&sli4->pci->dev, data.size, |
| &data.phys, GFP_KERNEL); |
| if (!data.virt) { |
| memset(&data, 0, sizeof(struct efc_dma)); |
| efc_log_err(sli4, "Failed to allocate memory for GET_CNTL_ADDL_ATTR\n"); |
| return -EIO; |
| } |
| |
| if (sli_cmd_common_get_cntl_addl_attributes(sli4, sli4->bmbx.virt, |
| &data)) { |
| efc_log_err(sli4, "bad GET_CNTL_ADDL_ATTR write\n"); |
| dma_free_coherent(&sli4->pci->dev, data.size, |
| data.virt, data.phys); |
| return -EIO; |
| } |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "mailbox fail (GET_CNTL_ADDL_ATTR)\n"); |
| dma_free_coherent(&sli4->pci->dev, data.size, |
| data.virt, data.phys); |
| return -EIO; |
| } |
| |
| add_attr = data.virt; |
| if (add_attr->hdr.status) { |
| efc_log_err(sli4, "GET_CNTL_ADDL_ATTR bad status %#x\n", |
| add_attr->hdr.status); |
| dma_free_coherent(&sli4->pci->dev, data.size, |
| data.virt, data.phys); |
| return -EIO; |
| } |
| |
| memcpy(sli4->ipl_name, add_attr->ipl_file_name, sizeof(sli4->ipl_name)); |
| |
| efc_log_info(sli4, "IPL:%s\n", (char *)sli4->ipl_name); |
| |
| dma_free_coherent(&sli4->pci->dev, data.size, data.virt, |
| data.phys); |
| memset(&data, 0, sizeof(struct efc_dma)); |
| return 0; |
| } |
| |
| static int |
| sli_get_fw_rev(struct sli4 *sli4) |
| { |
| struct sli4_cmd_read_rev *read_rev = sli4->bmbx.virt; |
| |
| if (sli_cmd_read_rev(sli4, sli4->bmbx.virt, &sli4->vpd_data)) |
| return -EIO; |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "bootstrap mailbox write fail (READ_REV)\n"); |
| return -EIO; |
| } |
| |
| if (le16_to_cpu(read_rev->hdr.status)) { |
| efc_log_err(sli4, "READ_REV bad status %#x\n", |
| le16_to_cpu(read_rev->hdr.status)); |
| return -EIO; |
| } |
| |
| sli4->fw_rev[0] = le32_to_cpu(read_rev->first_fw_id); |
| memcpy(sli4->fw_name[0], read_rev->first_fw_name, |
| sizeof(sli4->fw_name[0])); |
| |
| sli4->fw_rev[1] = le32_to_cpu(read_rev->second_fw_id); |
| memcpy(sli4->fw_name[1], read_rev->second_fw_name, |
| sizeof(sli4->fw_name[1])); |
| |
| sli4->hw_rev[0] = le32_to_cpu(read_rev->first_hw_rev); |
| sli4->hw_rev[1] = le32_to_cpu(read_rev->second_hw_rev); |
| sli4->hw_rev[2] = le32_to_cpu(read_rev->third_hw_rev); |
| |
| efc_log_info(sli4, "FW1:%s (%08x) / FW2:%s (%08x)\n", |
| read_rev->first_fw_name, le32_to_cpu(read_rev->first_fw_id), |
| read_rev->second_fw_name, le32_to_cpu(read_rev->second_fw_id)); |
| |
| efc_log_info(sli4, "HW1: %08x / HW2: %08x\n", |
| le32_to_cpu(read_rev->first_hw_rev), |
| le32_to_cpu(read_rev->second_hw_rev)); |
| |
| /* Check that all VPD data was returned */ |
| if (le32_to_cpu(read_rev->returned_vpd_length) != |
| le32_to_cpu(read_rev->actual_vpd_length)) { |
| efc_log_info(sli4, "VPD length: avail=%d return=%d actual=%d\n", |
| le32_to_cpu(read_rev->available_length_dword) & |
| SLI4_READ_REV_AVAILABLE_LENGTH, |
| le32_to_cpu(read_rev->returned_vpd_length), |
| le32_to_cpu(read_rev->actual_vpd_length)); |
| } |
| sli4->vpd_length = le32_to_cpu(read_rev->returned_vpd_length); |
| return 0; |
| } |
| |
| static int |
| sli_get_config(struct sli4 *sli4) |
| { |
| struct sli4_rsp_cmn_get_port_name *port_name; |
| struct sli4_cmd_read_nvparms *read_nvparms; |
| |
| /* |
| * Read the device configuration |
| */ |
| if (sli_get_read_config(sli4)) |
| return -EIO; |
| |
| if (sli_get_sli4_parameters(sli4)) |
| return -EIO; |
| |
| if (sli_get_ctrl_attributes(sli4)) |
| return -EIO; |
| |
| if (sli_cmd_common_get_port_name(sli4, sli4->bmbx.virt)) |
| return -EIO; |
| |
| port_name = (struct sli4_rsp_cmn_get_port_name *) |
| (((u8 *)sli4->bmbx.virt) + |
| offsetof(struct sli4_cmd_sli_config, payload.embed)); |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "bootstrap mailbox fail (GET_PORT_NAME)\n"); |
| return -EIO; |
| } |
| |
| sli4->port_name[0] = port_name->port_name[sli4->port_number]; |
| sli4->port_name[1] = '\0'; |
| |
| if (sli_get_fw_rev(sli4)) |
| return -EIO; |
| |
| if (sli_cmd_read_nvparms(sli4, sli4->bmbx.virt)) { |
| efc_log_err(sli4, "bad READ_NVPARMS write\n"); |
| return -EIO; |
| } |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "bootstrap mailbox fail (READ_NVPARMS)\n"); |
| return -EIO; |
| } |
| |
| read_nvparms = sli4->bmbx.virt; |
| if (le16_to_cpu(read_nvparms->hdr.status)) { |
| efc_log_err(sli4, "READ_NVPARMS bad status %#x\n", |
| le16_to_cpu(read_nvparms->hdr.status)); |
| return -EIO; |
| } |
| |
| memcpy(sli4->wwpn, read_nvparms->wwpn, sizeof(sli4->wwpn)); |
| memcpy(sli4->wwnn, read_nvparms->wwnn, sizeof(sli4->wwnn)); |
| |
| efc_log_info(sli4, "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", |
| sli4->wwpn[0], sli4->wwpn[1], sli4->wwpn[2], sli4->wwpn[3], |
| sli4->wwpn[4], sli4->wwpn[5], sli4->wwpn[6], sli4->wwpn[7]); |
| efc_log_info(sli4, "WWNN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", |
| sli4->wwnn[0], sli4->wwnn[1], sli4->wwnn[2], sli4->wwnn[3], |
| sli4->wwnn[4], sli4->wwnn[5], sli4->wwnn[6], sli4->wwnn[7]); |
| |
| return 0; |
| } |
| |
| int |
| sli_setup(struct sli4 *sli4, void *os, struct pci_dev *pdev, |
| void __iomem *reg[]) |
| { |
| u32 intf = U32_MAX; |
| u32 pci_class_rev = 0; |
| u32 rev_id = 0; |
| u32 family = 0; |
| u32 asic_id = 0; |
| u32 i; |
| struct sli4_asic_entry_t *asic; |
| |
| memset(sli4, 0, sizeof(struct sli4)); |
| |
| sli4->os = os; |
| sli4->pci = pdev; |
| |
| for (i = 0; i < 6; i++) |
| sli4->reg[i] = reg[i]; |
| /* |
| * Read the SLI_INTF register to discover the register layout |
| * and other capability information |
| */ |
| if (pci_read_config_dword(pdev, SLI4_INTF_REG, &intf)) |
| return -EIO; |
| |
| if ((intf & SLI4_INTF_VALID_MASK) != (u32)SLI4_INTF_VALID_VALUE) { |
| efc_log_err(sli4, "SLI_INTF is not valid\n"); |
| return -EIO; |
| } |
| |
| /* driver only support SLI-4 */ |
| if ((intf & SLI4_INTF_REV_MASK) != SLI4_INTF_REV_S4) { |
| efc_log_err(sli4, "Unsupported SLI revision (intf=%#x)\n", intf); |
| return -EIO; |
| } |
| |
| sli4->sli_family = intf & SLI4_INTF_FAMILY_MASK; |
| |
| sli4->if_type = intf & SLI4_INTF_IF_TYPE_MASK; |
| efc_log_info(sli4, "status=%#x error1=%#x error2=%#x\n", |
| sli_reg_read_status(sli4), |
| sli_reg_read_err1(sli4), |
| sli_reg_read_err2(sli4)); |
| |
| /* |
| * set the ASIC type and revision |
| */ |
| if (pci_read_config_dword(pdev, PCI_CLASS_REVISION, &pci_class_rev)) |
| return -EIO; |
| |
| rev_id = pci_class_rev & 0xff; |
| family = sli4->sli_family; |
| if (family == SLI4_FAMILY_CHECK_ASIC_TYPE) { |
| if (!pci_read_config_dword(pdev, SLI4_ASIC_ID_REG, &asic_id)) |
| family = asic_id & SLI4_ASIC_GEN_MASK; |
| } |
| |
| for (i = 0, asic = sli4_asic_table; i < ARRAY_SIZE(sli4_asic_table); |
| i++, asic++) { |
| if (rev_id == asic->rev_id && family == asic->family) { |
| sli4->asic_type = family; |
| sli4->asic_rev = rev_id; |
| break; |
| } |
| } |
| /* Fail if no matching asic type/rev was found */ |
| if (!sli4->asic_type) { |
| efc_log_err(sli4, "no matching asic family/rev found: %02x/%02x\n", |
| family, rev_id); |
| return -EIO; |
| } |
| |
| /* |
| * The bootstrap mailbox is equivalent to a MQ with a single 256 byte |
| * entry, a CQ with a single 16 byte entry, and no event queue. |
| * Alignment must be 16 bytes as the low order address bits in the |
| * address register are also control / status. |
| */ |
| sli4->bmbx.size = SLI4_BMBX_SIZE + sizeof(struct sli4_mcqe); |
| sli4->bmbx.virt = dma_alloc_coherent(&pdev->dev, sli4->bmbx.size, |
| &sli4->bmbx.phys, GFP_KERNEL); |
| if (!sli4->bmbx.virt) { |
| memset(&sli4->bmbx, 0, sizeof(struct efc_dma)); |
| efc_log_err(sli4, "bootstrap mailbox allocation failed\n"); |
| return -EIO; |
| } |
| |
| if (sli4->bmbx.phys & SLI4_BMBX_MASK_LO) { |
| efc_log_err(sli4, "bad alignment for bootstrap mailbox\n"); |
| return -EIO; |
| } |
| |
| efc_log_info(sli4, "bmbx v=%p p=0x%x %08x s=%zd\n", sli4->bmbx.virt, |
| upper_32_bits(sli4->bmbx.phys), |
| lower_32_bits(sli4->bmbx.phys), sli4->bmbx.size); |
| |
| /* 4096 is arbitrary. What should this value actually be? */ |
| sli4->vpd_data.size = 4096; |
| sli4->vpd_data.virt = dma_alloc_coherent(&pdev->dev, |
| sli4->vpd_data.size, |
| &sli4->vpd_data.phys, |
| GFP_KERNEL); |
| if (!sli4->vpd_data.virt) { |
| memset(&sli4->vpd_data, 0, sizeof(struct efc_dma)); |
| /* Note that failure isn't fatal in this specific case */ |
| efc_log_info(sli4, "VPD buffer allocation failed\n"); |
| } |
| |
| if (!sli_fw_init(sli4)) { |
| efc_log_err(sli4, "FW initialization failed\n"); |
| return -EIO; |
| } |
| |
| /* |
| * Set one of fcpi(initiator), fcpt(target), fcpc(combined) to true |
| * in addition to any other desired features |
| */ |
| sli4->features = (SLI4_REQFEAT_IAAB | SLI4_REQFEAT_NPIV | |
| SLI4_REQFEAT_DIF | SLI4_REQFEAT_VF | |
| SLI4_REQFEAT_FCPC | SLI4_REQFEAT_IAAR | |
| SLI4_REQFEAT_HLM | SLI4_REQFEAT_PERFH | |
| SLI4_REQFEAT_RXSEQ | SLI4_REQFEAT_RXRI | |
| SLI4_REQFEAT_MRQP); |
| |
| /* use performance hints if available */ |
| if (sli4->params.perf_hint) |
| sli4->features |= SLI4_REQFEAT_PERFH; |
| |
| if (sli_request_features(sli4, &sli4->features, true)) |
| return -EIO; |
| |
| if (sli_get_config(sli4)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| int |
| sli_init(struct sli4 *sli4) |
| { |
| if (sli4->params.has_extents) { |
| efc_log_info(sli4, "extend allocation not supported\n"); |
| return -EIO; |
| } |
| |
| sli4->features &= (~SLI4_REQFEAT_HLM); |
| sli4->features &= (~SLI4_REQFEAT_RXSEQ); |
| sli4->features &= (~SLI4_REQFEAT_RXRI); |
| |
| if (sli_request_features(sli4, &sli4->features, false)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| int |
| sli_reset(struct sli4 *sli4) |
| { |
| u32 i; |
| |
| if (!sli_fw_init(sli4)) { |
| efc_log_crit(sli4, "FW initialization failed\n"); |
| return -EIO; |
| } |
| |
| kfree(sli4->ext[0].base); |
| sli4->ext[0].base = NULL; |
| |
| for (i = 0; i < SLI4_RSRC_MAX; i++) { |
| bitmap_free(sli4->ext[i].use_map); |
| sli4->ext[i].use_map = NULL; |
| sli4->ext[i].base = NULL; |
| } |
| |
| return sli_get_config(sli4); |
| } |
| |
| int |
| sli_fw_reset(struct sli4 *sli4) |
| { |
| /* |
| * Firmware must be ready before issuing the reset. |
| */ |
| if (!sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC)) { |
| efc_log_crit(sli4, "FW status is NOT ready\n"); |
| return -EIO; |
| } |
| |
| /* Lancer uses PHYDEV_CONTROL */ |
| writel(SLI4_PHYDEV_CTRL_FRST, (sli4->reg[0] + SLI4_PHYDEV_CTRL_REG)); |
| |
| /* wait for the FW to become ready after the reset */ |
| if (!sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC)) { |
| efc_log_crit(sli4, "Failed to be ready after firmware reset\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| void |
| sli_teardown(struct sli4 *sli4) |
| { |
| u32 i; |
| |
| kfree(sli4->ext[0].base); |
| sli4->ext[0].base = NULL; |
| |
| for (i = 0; i < SLI4_RSRC_MAX; i++) { |
| sli4->ext[i].base = NULL; |
| |
| bitmap_free(sli4->ext[i].use_map); |
| sli4->ext[i].use_map = NULL; |
| } |
| |
| if (!sli_sliport_reset(sli4)) |
| efc_log_err(sli4, "FW deinitialization failed\n"); |
| |
| dma_free_coherent(&sli4->pci->dev, sli4->vpd_data.size, |
| sli4->vpd_data.virt, sli4->vpd_data.phys); |
| memset(&sli4->vpd_data, 0, sizeof(struct efc_dma)); |
| |
| dma_free_coherent(&sli4->pci->dev, sli4->bmbx.size, |
| sli4->bmbx.virt, sli4->bmbx.phys); |
| memset(&sli4->bmbx, 0, sizeof(struct efc_dma)); |
| } |
| |
| int |
| sli_callback(struct sli4 *sli4, enum sli4_callback which, |
| void *func, void *arg) |
| { |
| if (!func) { |
| efc_log_err(sli4, "bad parameter sli4=%p which=%#x func=%p\n", |
| sli4, which, func); |
| return -EIO; |
| } |
| |
| switch (which) { |
| case SLI4_CB_LINK: |
| sli4->link = func; |
| sli4->link_arg = arg; |
| break; |
| default: |
| efc_log_info(sli4, "unknown callback %#x\n", which); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_eq_modify_delay(struct sli4 *sli4, struct sli4_queue *eq, |
| u32 num_eq, u32 shift, u32 delay_mult) |
| { |
| sli_cmd_common_modify_eq_delay(sli4, sli4->bmbx.virt, eq, num_eq, |
| shift, delay_mult); |
| |
| if (sli_bmbx_command(sli4)) { |
| efc_log_crit(sli4, "bootstrap mailbox write fail (MODIFY EQ DELAY)\n"); |
| return -EIO; |
| } |
| if (sli_res_sli_config(sli4, sli4->bmbx.virt)) { |
| efc_log_err(sli4, "bad status MODIFY EQ DELAY\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_resource_alloc(struct sli4 *sli4, enum sli4_resource rtype, |
| u32 *rid, u32 *index) |
| { |
| int rc = 0; |
| u32 size; |
| u32 ext_idx; |
| u32 item_idx; |
| u32 position; |
| |
| *rid = U32_MAX; |
| *index = U32_MAX; |
| |
| switch (rtype) { |
| case SLI4_RSRC_VFI: |
| case SLI4_RSRC_VPI: |
| case SLI4_RSRC_RPI: |
| case SLI4_RSRC_XRI: |
| position = |
| find_first_zero_bit(sli4->ext[rtype].use_map, |
| sli4->ext[rtype].map_size); |
| if (position >= sli4->ext[rtype].map_size) { |
| efc_log_err(sli4, "out of resource %d (alloc=%d)\n", |
| rtype, sli4->ext[rtype].n_alloc); |
| rc = -EIO; |
| break; |
| } |
| set_bit(position, sli4->ext[rtype].use_map); |
| *index = position; |
| |
| size = sli4->ext[rtype].size; |
| |
| ext_idx = *index / size; |
| item_idx = *index % size; |
| |
| *rid = sli4->ext[rtype].base[ext_idx] + item_idx; |
| |
| sli4->ext[rtype].n_alloc++; |
| break; |
| default: |
| rc = -EIO; |
| } |
| |
| return rc; |
| } |
| |
| int |
| sli_resource_free(struct sli4 *sli4, enum sli4_resource rtype, u32 rid) |
| { |
| int rc = -EIO; |
| u32 x; |
| u32 size, *base; |
| |
| switch (rtype) { |
| case SLI4_RSRC_VFI: |
| case SLI4_RSRC_VPI: |
| case SLI4_RSRC_RPI: |
| case SLI4_RSRC_XRI: |
| /* |
| * Figure out which extent contains the resource ID. I.e. find |
| * the extent such that |
| * extent->base <= resource ID < extent->base + extent->size |
| */ |
| base = sli4->ext[rtype].base; |
| size = sli4->ext[rtype].size; |
| |
| /* |
| * In the case of FW reset, this may be cleared |
| * but the force_free path will still attempt to |
| * free the resource. Prevent a NULL pointer access. |
| */ |
| if (!base) |
| break; |
| |
| for (x = 0; x < sli4->ext[rtype].number; x++) { |
| if ((rid < base[x] || (rid >= (base[x] + size)))) |
| continue; |
| |
| rid -= base[x]; |
| clear_bit((x * size) + rid, sli4->ext[rtype].use_map); |
| rc = 0; |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return rc; |
| } |
| |
| int |
| sli_resource_reset(struct sli4 *sli4, enum sli4_resource rtype) |
| { |
| int rc = -EIO; |
| u32 i; |
| |
| switch (rtype) { |
| case SLI4_RSRC_VFI: |
| case SLI4_RSRC_VPI: |
| case SLI4_RSRC_RPI: |
| case SLI4_RSRC_XRI: |
| for (i = 0; i < sli4->ext[rtype].map_size; i++) |
| clear_bit(i, sli4->ext[rtype].use_map); |
| rc = 0; |
| break; |
| default: |
| break; |
| } |
| |
| return rc; |
| } |
| |
| int sli_raise_ue(struct sli4 *sli4, u8 dump) |
| { |
| u32 val = 0; |
| |
| if (dump == SLI4_FUNC_DESC_DUMP) { |
| val = SLI4_PORT_CTRL_FDD | SLI4_PORT_CTRL_IP; |
| writel(val, (sli4->reg[0] + SLI4_PORT_CTRL_REG)); |
| } else { |
| val = SLI4_PHYDEV_CTRL_FRST; |
| |
| if (dump == SLI4_CHIP_LEVEL_DUMP) |
| val |= SLI4_PHYDEV_CTRL_DD; |
| writel(val, (sli4->reg[0] + SLI4_PHYDEV_CTRL_REG)); |
| } |
| |
| return 0; |
| } |
| |
| int sli_dump_is_ready(struct sli4 *sli4) |
| { |
| int rc = SLI4_DUMP_READY_STATUS_NOT_READY; |
| u32 port_val; |
| u32 bmbx_val; |
| |
| /* |
| * Ensure that the port is ready AND the mailbox is |
| * ready before signaling that the dump is ready to go. |
| */ |
| port_val = sli_reg_read_status(sli4); |
| bmbx_val = readl(sli4->reg[0] + SLI4_BMBX_REG); |
| |
| if ((bmbx_val & SLI4_BMBX_RDY) && |
| (port_val & SLI4_PORT_STATUS_RDY)) { |
| if (port_val & SLI4_PORT_STATUS_DIP) |
| rc = SLI4_DUMP_READY_STATUS_DD_PRESENT; |
| else if (port_val & SLI4_PORT_STATUS_FDP) |
| rc = SLI4_DUMP_READY_STATUS_FDB_PRESENT; |
| } |
| |
| return rc; |
| } |
| |
| bool sli_reset_required(struct sli4 *sli4) |
| { |
| u32 val; |
| |
| val = sli_reg_read_status(sli4); |
| return (val & SLI4_PORT_STATUS_RN); |
| } |
| |
| int |
| sli_cmd_post_sgl_pages(struct sli4 *sli4, void *buf, u16 xri, |
| u32 xri_count, struct efc_dma *page0[], |
| struct efc_dma *page1[], struct efc_dma *dma) |
| { |
| struct sli4_rqst_post_sgl_pages *post = NULL; |
| u32 i; |
| __le32 req_len; |
| |
| post = sli_config_cmd_init(sli4, buf, |
| SLI4_CFG_PYLD_LENGTH(post_sgl_pages), dma); |
| if (!post) |
| return -EIO; |
| |
| /* payload size calculation */ |
| /* 4 = xri_start + xri_count */ |
| /* xri_count = # of XRI's registered */ |
| /* sizeof(uint64_t) = physical address size */ |
| /* 2 = # of physical addresses per page set */ |
| req_len = cpu_to_le32(4 + (xri_count * (sizeof(uint64_t) * 2))); |
| sli_cmd_fill_hdr(&post->hdr, SLI4_OPC_POST_SGL_PAGES, SLI4_SUBSYSTEM_FC, |
| CMD_V0, req_len); |
| post->xri_start = cpu_to_le16(xri); |
| post->xri_count = cpu_to_le16(xri_count); |
| |
| for (i = 0; i < xri_count; i++) { |
| post->page_set[i].page0_low = |
| cpu_to_le32(lower_32_bits(page0[i]->phys)); |
| post->page_set[i].page0_high = |
| cpu_to_le32(upper_32_bits(page0[i]->phys)); |
| } |
| |
| if (page1) { |
| for (i = 0; i < xri_count; i++) { |
| post->page_set[i].page1_low = |
| cpu_to_le32(lower_32_bits(page1[i]->phys)); |
| post->page_set[i].page1_high = |
| cpu_to_le32(upper_32_bits(page1[i]->phys)); |
| } |
| } |
| |
| return 0; |
| } |
| |
| int |
| sli_cmd_post_hdr_templates(struct sli4 *sli4, void *buf, struct efc_dma *dma, |
| u16 rpi, struct efc_dma *payload_dma) |
| { |
| struct sli4_rqst_post_hdr_templates *req = NULL; |
| uintptr_t phys = 0; |
| u32 i = 0; |
| u32 page_count, payload_size; |
| |
| page_count = sli_page_count(dma->size, SLI_PAGE_SIZE); |
| |
| payload_size = ((sizeof(struct sli4_rqst_post_hdr_templates) + |
| (page_count * SZ_DMAADDR)) - sizeof(struct sli4_rqst_hdr)); |
| |
| if (page_count > 16) { |
| /* |
| * We can't fit more than 16 descriptors into an embedded mbox |
| * command, it has to be non-embedded |
| */ |
| payload_dma->size = payload_size; |
| payload_dma->virt = dma_alloc_coherent(&sli4->pci->dev, |
| payload_dma->size, |
| &payload_dma->phys, GFP_KERNEL); |
| if (!payload_dma->virt) { |
| memset(payload_dma, 0, sizeof(struct efc_dma)); |
| efc_log_err(sli4, "mbox payload memory allocation fail\n"); |
| return -EIO; |
| } |
| req = sli_config_cmd_init(sli4, buf, payload_size, payload_dma); |
| } else { |
| req = sli_config_cmd_init(sli4, buf, payload_size, NULL); |
| } |
| |
| if (!req) |
| return -EIO; |
| |
| if (rpi == U16_MAX) |
| rpi = sli4->ext[SLI4_RSRC_RPI].base[0]; |
| |
| sli_cmd_fill_hdr(&req->hdr, SLI4_OPC_POST_HDR_TEMPLATES, |
| SLI4_SUBSYSTEM_FC, CMD_V0, |
| SLI4_RQST_PYLD_LEN(post_hdr_templates)); |
| |
| req->rpi_offset = cpu_to_le16(rpi); |
| req->page_count = cpu_to_le16(page_count); |
| phys = dma->phys; |
| for (i = 0; i < page_count; i++) { |
| req->page_descriptor[i].low = cpu_to_le32(lower_32_bits(phys)); |
| req->page_descriptor[i].high = cpu_to_le32(upper_32_bits(phys)); |
| |
| phys += SLI_PAGE_SIZE; |
| } |
| |
| return 0; |
| } |
| |
| u32 |
| sli_fc_get_rpi_requirements(struct sli4 *sli4, u32 n_rpi) |
| { |
| u32 bytes = 0; |
| |
| /* Check if header templates needed */ |
| if (sli4->params.hdr_template_req) |
| /* round up to a page */ |
| bytes = round_up(n_rpi * SLI4_HDR_TEMPLATE_SIZE, SLI_PAGE_SIZE); |
| |
| return bytes; |
| } |
| |
| const char * |
| sli_fc_get_status_string(u32 status) |
| { |
| static struct { |
| u32 code; |
| const char *label; |
| } lookup[] = { |
| {SLI4_FC_WCQE_STATUS_SUCCESS, "SUCCESS"}, |
| {SLI4_FC_WCQE_STATUS_FCP_RSP_FAILURE, "FCP_RSP_FAILURE"}, |
| {SLI4_FC_WCQE_STATUS_REMOTE_STOP, "REMOTE_STOP"}, |
| {SLI4_FC_WCQE_STATUS_LOCAL_REJECT, "LOCAL_REJECT"}, |
| {SLI4_FC_WCQE_STATUS_NPORT_RJT, "NPORT_RJT"}, |
| {SLI4_FC_WCQE_STATUS_FABRIC_RJT, "FABRIC_RJT"}, |
| {SLI4_FC_WCQE_STATUS_NPORT_BSY, "NPORT_BSY"}, |
| {SLI4_FC_WCQE_STATUS_FABRIC_BSY, "FABRIC_BSY"}, |
| {SLI4_FC_WCQE_STATUS_LS_RJT, "LS_RJT"}, |
| {SLI4_FC_WCQE_STATUS_CMD_REJECT, "CMD_REJECT"}, |
| {SLI4_FC_WCQE_STATUS_FCP_TGT_LENCHECK, "FCP_TGT_LENCHECK"}, |
| {SLI4_FC_WCQE_STATUS_RQ_BUF_LEN_EXCEEDED, "BUF_LEN_EXCEEDED"}, |
| {SLI4_FC_WCQE_STATUS_RQ_INSUFF_BUF_NEEDED, |
| "RQ_INSUFF_BUF_NEEDED"}, |
| {SLI4_FC_WCQE_STATUS_RQ_INSUFF_FRM_DISC, "RQ_INSUFF_FRM_DESC"}, |
| {SLI4_FC_WCQE_STATUS_RQ_DMA_FAILURE, "RQ_DMA_FAILURE"}, |
| {SLI4_FC_WCQE_STATUS_FCP_RSP_TRUNCATE, "FCP_RSP_TRUNCATE"}, |
| {SLI4_FC_WCQE_STATUS_DI_ERROR, "DI_ERROR"}, |
| {SLI4_FC_WCQE_STATUS_BA_RJT, "BA_RJT"}, |
| {SLI4_FC_WCQE_STATUS_RQ_INSUFF_XRI_NEEDED, |
| "RQ_INSUFF_XRI_NEEDED"}, |
| {SLI4_FC_WCQE_STATUS_RQ_INSUFF_XRI_DISC, "INSUFF_XRI_DISC"}, |
| {SLI4_FC_WCQE_STATUS_RX_ERROR_DETECT, "RX_ERROR_DETECT"}, |
| {SLI4_FC_WCQE_STATUS_RX_ABORT_REQUEST, "RX_ABORT_REQUEST"}, |
| }; |
| u32 i; |
| |
| for (i = 0; i < ARRAY_SIZE(lookup); i++) { |
| if (status == lookup[i].code) |
| return lookup[i].label; |
| } |
| return "unknown"; |
| } |