| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2008 Steven Rostedt <srostedt@redhat.com> |
| * |
| */ |
| #include <linux/sched/task_stack.h> |
| #include <linux/stacktrace.h> |
| #include <linux/security.h> |
| #include <linux/kallsyms.h> |
| #include <linux/seq_file.h> |
| #include <linux/spinlock.h> |
| #include <linux/uaccess.h> |
| #include <linux/ftrace.h> |
| #include <linux/module.h> |
| #include <linux/sysctl.h> |
| #include <linux/init.h> |
| |
| #include <asm/setup.h> |
| |
| #include "trace.h" |
| |
| #define STACK_TRACE_ENTRIES 500 |
| |
| static unsigned long stack_dump_trace[STACK_TRACE_ENTRIES]; |
| static unsigned stack_trace_index[STACK_TRACE_ENTRIES]; |
| |
| static unsigned int stack_trace_nr_entries; |
| static unsigned long stack_trace_max_size; |
| static arch_spinlock_t stack_trace_max_lock = |
| (arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED; |
| |
| DEFINE_PER_CPU(int, disable_stack_tracer); |
| static DEFINE_MUTEX(stack_sysctl_mutex); |
| |
| int stack_tracer_enabled; |
| |
| static void print_max_stack(void) |
| { |
| long i; |
| int size; |
| |
| pr_emerg(" Depth Size Location (%d entries)\n" |
| " ----- ---- --------\n", |
| stack_trace_nr_entries); |
| |
| for (i = 0; i < stack_trace_nr_entries; i++) { |
| if (i + 1 == stack_trace_nr_entries) |
| size = stack_trace_index[i]; |
| else |
| size = stack_trace_index[i] - stack_trace_index[i+1]; |
| |
| pr_emerg("%3ld) %8d %5d %pS\n", i, stack_trace_index[i], |
| size, (void *)stack_dump_trace[i]); |
| } |
| } |
| |
| /* |
| * The stack tracer looks for a maximum stack at each call from a function. It |
| * registers a callback from ftrace, and in that callback it examines the stack |
| * size. It determines the stack size from the variable passed in, which is the |
| * address of a local variable in the stack_trace_call() callback function. |
| * The stack size is calculated by the address of the local variable to the top |
| * of the current stack. If that size is smaller than the currently saved max |
| * stack size, nothing more is done. |
| * |
| * If the size of the stack is greater than the maximum recorded size, then the |
| * following algorithm takes place. |
| * |
| * For architectures (like x86) that store the function's return address before |
| * saving the function's local variables, the stack will look something like |
| * this: |
| * |
| * [ top of stack ] |
| * 0: sys call entry frame |
| * 10: return addr to entry code |
| * 11: start of sys_foo frame |
| * 20: return addr to sys_foo |
| * 21: start of kernel_func_bar frame |
| * 30: return addr to kernel_func_bar |
| * 31: [ do trace stack here ] |
| * |
| * The save_stack_trace() is called returning all the functions it finds in the |
| * current stack. Which would be (from the bottom of the stack to the top): |
| * |
| * return addr to kernel_func_bar |
| * return addr to sys_foo |
| * return addr to entry code |
| * |
| * Now to figure out how much each of these functions' local variable size is, |
| * a search of the stack is made to find these values. When a match is made, it |
| * is added to the stack_dump_trace[] array. The offset into the stack is saved |
| * in the stack_trace_index[] array. The above example would show: |
| * |
| * stack_dump_trace[] | stack_trace_index[] |
| * ------------------ + ------------------- |
| * return addr to kernel_func_bar | 30 |
| * return addr to sys_foo | 20 |
| * return addr to entry | 10 |
| * |
| * The print_max_stack() function above, uses these values to print the size of |
| * each function's portion of the stack. |
| * |
| * for (i = 0; i < nr_entries; i++) { |
| * size = i == nr_entries - 1 ? stack_trace_index[i] : |
| * stack_trace_index[i] - stack_trace_index[i+1] |
| * print "%d %d %d %s\n", i, stack_trace_index[i], size, stack_dump_trace[i]); |
| * } |
| * |
| * The above shows |
| * |
| * depth size location |
| * ----- ---- -------- |
| * 0 30 10 kernel_func_bar |
| * 1 20 10 sys_foo |
| * 2 10 10 entry code |
| * |
| * Now for architectures that might save the return address after the functions |
| * local variables (saving the link register before calling nested functions), |
| * this will cause the stack to look a little different: |
| * |
| * [ top of stack ] |
| * 0: sys call entry frame |
| * 10: start of sys_foo_frame |
| * 19: return addr to entry code << lr saved before calling kernel_func_bar |
| * 20: start of kernel_func_bar frame |
| * 29: return addr to sys_foo_frame << lr saved before calling next function |
| * 30: [ do trace stack here ] |
| * |
| * Although the functions returned by save_stack_trace() may be the same, the |
| * placement in the stack will be different. Using the same algorithm as above |
| * would yield: |
| * |
| * stack_dump_trace[] | stack_trace_index[] |
| * ------------------ + ------------------- |
| * return addr to kernel_func_bar | 30 |
| * return addr to sys_foo | 29 |
| * return addr to entry | 19 |
| * |
| * Where the mapping is off by one: |
| * |
| * kernel_func_bar stack frame size is 29 - 19 not 30 - 29! |
| * |
| * To fix this, if the architecture sets ARCH_RET_ADDR_AFTER_LOCAL_VARS the |
| * values in stack_trace_index[] are shifted by one to and the number of |
| * stack trace entries is decremented by one. |
| * |
| * stack_dump_trace[] | stack_trace_index[] |
| * ------------------ + ------------------- |
| * return addr to kernel_func_bar | 29 |
| * return addr to sys_foo | 19 |
| * |
| * Although the entry function is not displayed, the first function (sys_foo) |
| * will still include the stack size of it. |
| */ |
| static void check_stack(unsigned long ip, unsigned long *stack) |
| { |
| unsigned long this_size, flags; unsigned long *p, *top, *start; |
| static int tracer_frame; |
| int frame_size = READ_ONCE(tracer_frame); |
| int i, x; |
| |
| this_size = ((unsigned long)stack) & (THREAD_SIZE-1); |
| this_size = THREAD_SIZE - this_size; |
| /* Remove the frame of the tracer */ |
| this_size -= frame_size; |
| |
| if (this_size <= stack_trace_max_size) |
| return; |
| |
| /* we do not handle interrupt stacks yet */ |
| if (!object_is_on_stack(stack)) |
| return; |
| |
| /* Can't do this from NMI context (can cause deadlocks) */ |
| if (in_nmi()) |
| return; |
| |
| local_irq_save(flags); |
| arch_spin_lock(&stack_trace_max_lock); |
| |
| /* In case another CPU set the tracer_frame on us */ |
| if (unlikely(!frame_size)) |
| this_size -= tracer_frame; |
| |
| /* a race could have already updated it */ |
| if (this_size <= stack_trace_max_size) |
| goto out; |
| |
| stack_trace_max_size = this_size; |
| |
| stack_trace_nr_entries = stack_trace_save(stack_dump_trace, |
| ARRAY_SIZE(stack_dump_trace) - 1, |
| 0); |
| |
| /* Skip over the overhead of the stack tracer itself */ |
| for (i = 0; i < stack_trace_nr_entries; i++) { |
| if (stack_dump_trace[i] == ip) |
| break; |
| } |
| |
| /* |
| * Some archs may not have the passed in ip in the dump. |
| * If that happens, we need to show everything. |
| */ |
| if (i == stack_trace_nr_entries) |
| i = 0; |
| |
| /* |
| * Now find where in the stack these are. |
| */ |
| x = 0; |
| start = stack; |
| top = (unsigned long *) |
| (((unsigned long)start & ~(THREAD_SIZE-1)) + THREAD_SIZE); |
| |
| /* |
| * Loop through all the entries. One of the entries may |
| * for some reason be missed on the stack, so we may |
| * have to account for them. If they are all there, this |
| * loop will only happen once. This code only takes place |
| * on a new max, so it is far from a fast path. |
| */ |
| while (i < stack_trace_nr_entries) { |
| int found = 0; |
| |
| stack_trace_index[x] = this_size; |
| p = start; |
| |
| for (; p < top && i < stack_trace_nr_entries; p++) { |
| /* |
| * The READ_ONCE_NOCHECK is used to let KASAN know that |
| * this is not a stack-out-of-bounds error. |
| */ |
| if ((READ_ONCE_NOCHECK(*p)) == stack_dump_trace[i]) { |
| stack_dump_trace[x] = stack_dump_trace[i++]; |
| this_size = stack_trace_index[x++] = |
| (top - p) * sizeof(unsigned long); |
| found = 1; |
| /* Start the search from here */ |
| start = p + 1; |
| /* |
| * We do not want to show the overhead |
| * of the stack tracer stack in the |
| * max stack. If we haven't figured |
| * out what that is, then figure it out |
| * now. |
| */ |
| if (unlikely(!tracer_frame)) { |
| tracer_frame = (p - stack) * |
| sizeof(unsigned long); |
| stack_trace_max_size -= tracer_frame; |
| } |
| } |
| } |
| |
| if (!found) |
| i++; |
| } |
| |
| #ifdef ARCH_FTRACE_SHIFT_STACK_TRACER |
| /* |
| * Some archs will store the link register before calling |
| * nested functions. This means the saved return address |
| * comes after the local storage, and we need to shift |
| * for that. |
| */ |
| if (x > 1) { |
| memmove(&stack_trace_index[0], &stack_trace_index[1], |
| sizeof(stack_trace_index[0]) * (x - 1)); |
| x--; |
| } |
| #endif |
| |
| stack_trace_nr_entries = x; |
| |
| if (task_stack_end_corrupted(current)) { |
| print_max_stack(); |
| BUG(); |
| } |
| |
| out: |
| arch_spin_unlock(&stack_trace_max_lock); |
| local_irq_restore(flags); |
| } |
| |
| /* Some archs may not define MCOUNT_INSN_SIZE */ |
| #ifndef MCOUNT_INSN_SIZE |
| # define MCOUNT_INSN_SIZE 0 |
| #endif |
| |
| static void |
| stack_trace_call(unsigned long ip, unsigned long parent_ip, |
| struct ftrace_ops *op, struct ftrace_regs *fregs) |
| { |
| unsigned long stack; |
| |
| preempt_disable_notrace(); |
| |
| /* no atomic needed, we only modify this variable by this cpu */ |
| __this_cpu_inc(disable_stack_tracer); |
| if (__this_cpu_read(disable_stack_tracer) != 1) |
| goto out; |
| |
| /* If rcu is not watching, then save stack trace can fail */ |
| if (!rcu_is_watching()) |
| goto out; |
| |
| ip += MCOUNT_INSN_SIZE; |
| |
| check_stack(ip, &stack); |
| |
| out: |
| __this_cpu_dec(disable_stack_tracer); |
| /* prevent recursion in schedule */ |
| preempt_enable_notrace(); |
| } |
| |
| static struct ftrace_ops trace_ops __read_mostly = |
| { |
| .func = stack_trace_call, |
| }; |
| |
| static ssize_t |
| stack_max_size_read(struct file *filp, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| unsigned long *ptr = filp->private_data; |
| char buf[64]; |
| int r; |
| |
| r = snprintf(buf, sizeof(buf), "%ld\n", *ptr); |
| if (r > sizeof(buf)) |
| r = sizeof(buf); |
| return simple_read_from_buffer(ubuf, count, ppos, buf, r); |
| } |
| |
| static ssize_t |
| stack_max_size_write(struct file *filp, const char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| long *ptr = filp->private_data; |
| unsigned long val, flags; |
| int ret; |
| |
| ret = kstrtoul_from_user(ubuf, count, 10, &val); |
| if (ret) |
| return ret; |
| |
| local_irq_save(flags); |
| |
| /* |
| * In case we trace inside arch_spin_lock() or after (NMI), |
| * we will cause circular lock, so we also need to increase |
| * the percpu disable_stack_tracer here. |
| */ |
| __this_cpu_inc(disable_stack_tracer); |
| |
| arch_spin_lock(&stack_trace_max_lock); |
| *ptr = val; |
| arch_spin_unlock(&stack_trace_max_lock); |
| |
| __this_cpu_dec(disable_stack_tracer); |
| local_irq_restore(flags); |
| |
| return count; |
| } |
| |
| static const struct file_operations stack_max_size_fops = { |
| .open = tracing_open_generic, |
| .read = stack_max_size_read, |
| .write = stack_max_size_write, |
| .llseek = default_llseek, |
| }; |
| |
| static void * |
| __next(struct seq_file *m, loff_t *pos) |
| { |
| long n = *pos - 1; |
| |
| if (n >= stack_trace_nr_entries) |
| return NULL; |
| |
| m->private = (void *)n; |
| return &m->private; |
| } |
| |
| static void * |
| t_next(struct seq_file *m, void *v, loff_t *pos) |
| { |
| (*pos)++; |
| return __next(m, pos); |
| } |
| |
| static void *t_start(struct seq_file *m, loff_t *pos) |
| { |
| local_irq_disable(); |
| |
| __this_cpu_inc(disable_stack_tracer); |
| |
| arch_spin_lock(&stack_trace_max_lock); |
| |
| if (*pos == 0) |
| return SEQ_START_TOKEN; |
| |
| return __next(m, pos); |
| } |
| |
| static void t_stop(struct seq_file *m, void *p) |
| { |
| arch_spin_unlock(&stack_trace_max_lock); |
| |
| __this_cpu_dec(disable_stack_tracer); |
| |
| local_irq_enable(); |
| } |
| |
| static void trace_lookup_stack(struct seq_file *m, long i) |
| { |
| unsigned long addr = stack_dump_trace[i]; |
| |
| seq_printf(m, "%pS\n", (void *)addr); |
| } |
| |
| static void print_disabled(struct seq_file *m) |
| { |
| seq_puts(m, "#\n" |
| "# Stack tracer disabled\n" |
| "#\n" |
| "# To enable the stack tracer, either add 'stacktrace' to the\n" |
| "# kernel command line\n" |
| "# or 'echo 1 > /proc/sys/kernel/stack_tracer_enabled'\n" |
| "#\n"); |
| } |
| |
| static int t_show(struct seq_file *m, void *v) |
| { |
| long i; |
| int size; |
| |
| if (v == SEQ_START_TOKEN) { |
| seq_printf(m, " Depth Size Location" |
| " (%d entries)\n" |
| " ----- ---- --------\n", |
| stack_trace_nr_entries); |
| |
| if (!stack_tracer_enabled && !stack_trace_max_size) |
| print_disabled(m); |
| |
| return 0; |
| } |
| |
| i = *(long *)v; |
| |
| if (i >= stack_trace_nr_entries) |
| return 0; |
| |
| if (i + 1 == stack_trace_nr_entries) |
| size = stack_trace_index[i]; |
| else |
| size = stack_trace_index[i] - stack_trace_index[i+1]; |
| |
| seq_printf(m, "%3ld) %8d %5d ", i, stack_trace_index[i], size); |
| |
| trace_lookup_stack(m, i); |
| |
| return 0; |
| } |
| |
| static const struct seq_operations stack_trace_seq_ops = { |
| .start = t_start, |
| .next = t_next, |
| .stop = t_stop, |
| .show = t_show, |
| }; |
| |
| static int stack_trace_open(struct inode *inode, struct file *file) |
| { |
| int ret; |
| |
| ret = security_locked_down(LOCKDOWN_TRACEFS); |
| if (ret) |
| return ret; |
| |
| return seq_open(file, &stack_trace_seq_ops); |
| } |
| |
| static const struct file_operations stack_trace_fops = { |
| .open = stack_trace_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = seq_release, |
| }; |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| |
| static int |
| stack_trace_filter_open(struct inode *inode, struct file *file) |
| { |
| struct ftrace_ops *ops = inode->i_private; |
| |
| /* Checks for tracefs lockdown */ |
| return ftrace_regex_open(ops, FTRACE_ITER_FILTER, |
| inode, file); |
| } |
| |
| static const struct file_operations stack_trace_filter_fops = { |
| .open = stack_trace_filter_open, |
| .read = seq_read, |
| .write = ftrace_filter_write, |
| .llseek = tracing_lseek, |
| .release = ftrace_regex_release, |
| }; |
| |
| #endif /* CONFIG_DYNAMIC_FTRACE */ |
| |
| int |
| stack_trace_sysctl(const struct ctl_table *table, int write, void *buffer, |
| size_t *lenp, loff_t *ppos) |
| { |
| int was_enabled; |
| int ret; |
| |
| mutex_lock(&stack_sysctl_mutex); |
| was_enabled = !!stack_tracer_enabled; |
| |
| ret = proc_dointvec(table, write, buffer, lenp, ppos); |
| |
| if (ret || !write || (was_enabled == !!stack_tracer_enabled)) |
| goto out; |
| |
| if (stack_tracer_enabled) |
| register_ftrace_function(&trace_ops); |
| else |
| unregister_ftrace_function(&trace_ops); |
| out: |
| mutex_unlock(&stack_sysctl_mutex); |
| return ret; |
| } |
| |
| static char stack_trace_filter_buf[COMMAND_LINE_SIZE+1] __initdata; |
| |
| static __init int enable_stacktrace(char *str) |
| { |
| int len; |
| |
| if ((len = str_has_prefix(str, "_filter="))) |
| strncpy(stack_trace_filter_buf, str + len, COMMAND_LINE_SIZE); |
| |
| stack_tracer_enabled = 1; |
| return 1; |
| } |
| __setup("stacktrace", enable_stacktrace); |
| |
| static __init int stack_trace_init(void) |
| { |
| int ret; |
| |
| ret = tracing_init_dentry(); |
| if (ret) |
| return 0; |
| |
| trace_create_file("stack_max_size", TRACE_MODE_WRITE, NULL, |
| &stack_trace_max_size, &stack_max_size_fops); |
| |
| trace_create_file("stack_trace", TRACE_MODE_READ, NULL, |
| NULL, &stack_trace_fops); |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| trace_create_file("stack_trace_filter", TRACE_MODE_WRITE, NULL, |
| &trace_ops, &stack_trace_filter_fops); |
| #endif |
| |
| if (stack_trace_filter_buf[0]) |
| ftrace_set_early_filter(&trace_ops, stack_trace_filter_buf, 1); |
| |
| if (stack_tracer_enabled) |
| register_ftrace_function(&trace_ops); |
| |
| return 0; |
| } |
| |
| device_initcall(stack_trace_init); |