| // SPDX-License-Identifier: GPL-2.0-only |
| /************************************************************************** |
| * Copyright (c) 2007-2011, Intel Corporation. |
| * All Rights Reserved. |
| * |
| **************************************************************************/ |
| |
| #include <linux/console.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/pfn_t.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/tty.h> |
| |
| #include <drm/drm.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| |
| #include "framebuffer.h" |
| #include "gem.h" |
| #include "gtt.h" |
| #include "psb_drv.h" |
| #include "psb_intel_drv.h" |
| #include "psb_intel_reg.h" |
| |
| static const struct drm_framebuffer_funcs psb_fb_funcs = { |
| .destroy = drm_gem_fb_destroy, |
| .create_handle = drm_gem_fb_create_handle, |
| }; |
| |
| #define CMAP_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16) |
| |
| static int psbfb_setcolreg(unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, |
| struct fb_info *info) |
| { |
| struct drm_fb_helper *fb_helper = info->par; |
| struct drm_framebuffer *fb = fb_helper->fb; |
| uint32_t v; |
| |
| if (!fb) |
| return -ENOMEM; |
| |
| if (regno > 255) |
| return 1; |
| |
| red = CMAP_TOHW(red, info->var.red.length); |
| blue = CMAP_TOHW(blue, info->var.blue.length); |
| green = CMAP_TOHW(green, info->var.green.length); |
| transp = CMAP_TOHW(transp, info->var.transp.length); |
| |
| v = (red << info->var.red.offset) | |
| (green << info->var.green.offset) | |
| (blue << info->var.blue.offset) | |
| (transp << info->var.transp.offset); |
| |
| if (regno < 16) { |
| switch (fb->format->cpp[0] * 8) { |
| case 16: |
| ((uint32_t *) info->pseudo_palette)[regno] = v; |
| break; |
| case 24: |
| case 32: |
| ((uint32_t *) info->pseudo_palette)[regno] = v; |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static vm_fault_t psbfb_vm_fault(struct vm_fault *vmf) |
| { |
| struct vm_area_struct *vma = vmf->vma; |
| struct drm_framebuffer *fb = vma->vm_private_data; |
| struct drm_device *dev = fb->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct gtt_range *gtt = to_gtt_range(fb->obj[0]); |
| int page_num; |
| int i; |
| unsigned long address; |
| vm_fault_t ret = VM_FAULT_SIGBUS; |
| unsigned long pfn; |
| unsigned long phys_addr = (unsigned long)dev_priv->stolen_base + |
| gtt->offset; |
| |
| page_num = vma_pages(vma); |
| address = vmf->address - (vmf->pgoff << PAGE_SHIFT); |
| |
| vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); |
| |
| for (i = 0; i < page_num; i++) { |
| pfn = (phys_addr >> PAGE_SHIFT); |
| |
| ret = vmf_insert_mixed(vma, address, |
| __pfn_to_pfn_t(pfn, PFN_DEV)); |
| if (unlikely(ret & VM_FAULT_ERROR)) |
| break; |
| address += PAGE_SIZE; |
| phys_addr += PAGE_SIZE; |
| } |
| return ret; |
| } |
| |
| static void psbfb_vm_open(struct vm_area_struct *vma) |
| { |
| } |
| |
| static void psbfb_vm_close(struct vm_area_struct *vma) |
| { |
| } |
| |
| static const struct vm_operations_struct psbfb_vm_ops = { |
| .fault = psbfb_vm_fault, |
| .open = psbfb_vm_open, |
| .close = psbfb_vm_close |
| }; |
| |
| static int psbfb_mmap(struct fb_info *info, struct vm_area_struct *vma) |
| { |
| struct drm_fb_helper *fb_helper = info->par; |
| struct drm_framebuffer *fb = fb_helper->fb; |
| |
| if (vma->vm_pgoff != 0) |
| return -EINVAL; |
| if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) |
| return -EINVAL; |
| |
| /* |
| * If this is a GEM object then info->screen_base is the virtual |
| * kernel remapping of the object. FIXME: Review if this is |
| * suitable for our mmap work |
| */ |
| vma->vm_ops = &psbfb_vm_ops; |
| vma->vm_private_data = (void *)fb; |
| vma->vm_flags |= VM_IO | VM_MIXEDMAP | VM_DONTEXPAND | VM_DONTDUMP; |
| return 0; |
| } |
| |
| static const struct fb_ops psbfb_unaccel_ops = { |
| .owner = THIS_MODULE, |
| DRM_FB_HELPER_DEFAULT_OPS, |
| .fb_setcolreg = psbfb_setcolreg, |
| .fb_fillrect = drm_fb_helper_cfb_fillrect, |
| .fb_copyarea = drm_fb_helper_cfb_copyarea, |
| .fb_imageblit = drm_fb_helper_cfb_imageblit, |
| .fb_mmap = psbfb_mmap, |
| }; |
| |
| /** |
| * psb_framebuffer_init - initialize a framebuffer |
| * @dev: our DRM device |
| * @fb: framebuffer to set up |
| * @mode_cmd: mode description |
| * @obj: backing object |
| * |
| * Configure and fill in the boilerplate for our frame buffer. Return |
| * 0 on success or an error code if we fail. |
| */ |
| static int psb_framebuffer_init(struct drm_device *dev, |
| struct drm_framebuffer *fb, |
| const struct drm_mode_fb_cmd2 *mode_cmd, |
| struct drm_gem_object *obj) |
| { |
| const struct drm_format_info *info; |
| int ret; |
| |
| /* |
| * Reject unknown formats, YUV formats, and formats with more than |
| * 4 bytes per pixel. |
| */ |
| info = drm_get_format_info(dev, mode_cmd); |
| if (!info || !info->depth || info->cpp[0] > 4) |
| return -EINVAL; |
| |
| if (mode_cmd->pitches[0] & 63) |
| return -EINVAL; |
| |
| drm_helper_mode_fill_fb_struct(dev, fb, mode_cmd); |
| fb->obj[0] = obj; |
| ret = drm_framebuffer_init(dev, fb, &psb_fb_funcs); |
| if (ret) { |
| dev_err(dev->dev, "framebuffer init failed: %d\n", ret); |
| return ret; |
| } |
| return 0; |
| } |
| |
| /** |
| * psb_framebuffer_create - create a framebuffer backed by gt |
| * @dev: our DRM device |
| * @mode_cmd: the description of the requested mode |
| * @obj: the backing object |
| * |
| * Create a framebuffer object backed by the gt, and fill in the |
| * boilerplate required |
| * |
| * TODO: review object references |
| */ |
| |
| static struct drm_framebuffer *psb_framebuffer_create |
| (struct drm_device *dev, |
| const struct drm_mode_fb_cmd2 *mode_cmd, |
| struct drm_gem_object *obj) |
| { |
| struct drm_framebuffer *fb; |
| int ret; |
| |
| fb = kzalloc(sizeof(*fb), GFP_KERNEL); |
| if (!fb) |
| return ERR_PTR(-ENOMEM); |
| |
| ret = psb_framebuffer_init(dev, fb, mode_cmd, obj); |
| if (ret) { |
| kfree(fb); |
| return ERR_PTR(ret); |
| } |
| return fb; |
| } |
| |
| /** |
| * psbfb_alloc - allocate frame buffer memory |
| * @dev: the DRM device |
| * @aligned_size: space needed |
| * |
| * Allocate the frame buffer. In the usual case we get a GTT range that |
| * is stolen memory backed and life is simple. If there isn't sufficient |
| * we fail as we don't have the virtual mapping space to really vmap it |
| * and the kernel console code can't handle non linear framebuffers. |
| * |
| * Re-address this as and if the framebuffer layer grows this ability. |
| */ |
| static struct gtt_range *psbfb_alloc(struct drm_device *dev, int aligned_size) |
| { |
| struct gtt_range *backing; |
| /* Begin by trying to use stolen memory backing */ |
| backing = psb_gtt_alloc_range(dev, aligned_size, "fb", 1, PAGE_SIZE); |
| if (backing) { |
| backing->gem.funcs = &psb_gem_object_funcs; |
| drm_gem_private_object_init(dev, &backing->gem, aligned_size); |
| return backing; |
| } |
| return NULL; |
| } |
| |
| /** |
| * psbfb_create - create a framebuffer |
| * @fb_helper: the framebuffer helper |
| * @sizes: specification of the layout |
| * |
| * Create a framebuffer to the specifications provided |
| */ |
| static int psbfb_create(struct drm_fb_helper *fb_helper, |
| struct drm_fb_helper_surface_size *sizes) |
| { |
| struct drm_device *dev = fb_helper->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct pci_dev *pdev = to_pci_dev(dev->dev); |
| struct fb_info *info; |
| struct drm_framebuffer *fb; |
| struct drm_mode_fb_cmd2 mode_cmd; |
| int size; |
| int ret; |
| struct gtt_range *backing; |
| u32 bpp, depth; |
| |
| mode_cmd.width = sizes->surface_width; |
| mode_cmd.height = sizes->surface_height; |
| bpp = sizes->surface_bpp; |
| depth = sizes->surface_depth; |
| |
| /* No 24bit packed */ |
| if (bpp == 24) |
| bpp = 32; |
| |
| mode_cmd.pitches[0] = ALIGN(mode_cmd.width * DIV_ROUND_UP(bpp, 8), 64); |
| |
| size = mode_cmd.pitches[0] * mode_cmd.height; |
| size = ALIGN(size, PAGE_SIZE); |
| |
| /* Allocate the framebuffer in the GTT with stolen page backing */ |
| backing = psbfb_alloc(dev, size); |
| if (backing == NULL) |
| return -ENOMEM; |
| |
| memset(dev_priv->vram_addr + backing->offset, 0, size); |
| |
| info = drm_fb_helper_alloc_fbi(fb_helper); |
| if (IS_ERR(info)) { |
| ret = PTR_ERR(info); |
| goto out; |
| } |
| |
| mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth); |
| |
| fb = psb_framebuffer_create(dev, &mode_cmd, &backing->gem); |
| if (IS_ERR(fb)) { |
| ret = PTR_ERR(fb); |
| goto out; |
| } |
| |
| fb_helper->fb = fb; |
| |
| info->fbops = &psbfb_unaccel_ops; |
| |
| info->fix.smem_start = dev->mode_config.fb_base; |
| info->fix.smem_len = size; |
| info->fix.ywrapstep = 0; |
| info->fix.ypanstep = 0; |
| |
| /* Accessed stolen memory directly */ |
| info->screen_base = dev_priv->vram_addr + backing->offset; |
| info->screen_size = size; |
| |
| if (dev_priv->gtt.stolen_size) { |
| info->apertures->ranges[0].base = dev->mode_config.fb_base; |
| info->apertures->ranges[0].size = dev_priv->gtt.stolen_size; |
| } |
| |
| drm_fb_helper_fill_info(info, fb_helper, sizes); |
| |
| info->fix.mmio_start = pci_resource_start(pdev, 0); |
| info->fix.mmio_len = pci_resource_len(pdev, 0); |
| |
| /* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */ |
| |
| dev_dbg(dev->dev, "allocated %dx%d fb\n", fb->width, fb->height); |
| |
| return 0; |
| out: |
| psb_gtt_free_range(dev, backing); |
| return ret; |
| } |
| |
| /** |
| * psb_user_framebuffer_create - create framebuffer |
| * @dev: our DRM device |
| * @filp: client file |
| * @cmd: mode request |
| * |
| * Create a new framebuffer backed by a userspace GEM object |
| */ |
| static struct drm_framebuffer *psb_user_framebuffer_create |
| (struct drm_device *dev, struct drm_file *filp, |
| const struct drm_mode_fb_cmd2 *cmd) |
| { |
| struct drm_gem_object *obj; |
| |
| /* |
| * Find the GEM object and thus the gtt range object that is |
| * to back this space |
| */ |
| obj = drm_gem_object_lookup(filp, cmd->handles[0]); |
| if (obj == NULL) |
| return ERR_PTR(-ENOENT); |
| |
| /* Let the core code do all the work */ |
| return psb_framebuffer_create(dev, cmd, obj); |
| } |
| |
| static int psbfb_probe(struct drm_fb_helper *fb_helper, |
| struct drm_fb_helper_surface_size *sizes) |
| { |
| struct drm_device *dev = fb_helper->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| unsigned int fb_size; |
| int bytespp; |
| |
| bytespp = sizes->surface_bpp / 8; |
| if (bytespp == 3) /* no 24bit packed */ |
| bytespp = 4; |
| |
| /* If the mode will not fit in 32bit then switch to 16bit to get |
| a console on full resolution. The X mode setting server will |
| allocate its own 32bit GEM framebuffer */ |
| fb_size = ALIGN(sizes->surface_width * bytespp, 64) * |
| sizes->surface_height; |
| fb_size = ALIGN(fb_size, PAGE_SIZE); |
| |
| if (fb_size > dev_priv->vram_stolen_size) { |
| sizes->surface_bpp = 16; |
| sizes->surface_depth = 16; |
| } |
| |
| return psbfb_create(fb_helper, sizes); |
| } |
| |
| static const struct drm_fb_helper_funcs psb_fb_helper_funcs = { |
| .fb_probe = psbfb_probe, |
| }; |
| |
| static int psb_fbdev_destroy(struct drm_device *dev, |
| struct drm_fb_helper *fb_helper) |
| { |
| struct drm_framebuffer *fb = fb_helper->fb; |
| |
| drm_fb_helper_unregister_fbi(fb_helper); |
| |
| drm_fb_helper_fini(fb_helper); |
| drm_framebuffer_unregister_private(fb); |
| drm_framebuffer_cleanup(fb); |
| |
| if (fb->obj[0]) |
| drm_gem_object_put(fb->obj[0]); |
| kfree(fb); |
| |
| return 0; |
| } |
| |
| int psb_fbdev_init(struct drm_device *dev) |
| { |
| struct drm_fb_helper *fb_helper; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| fb_helper = kzalloc(sizeof(*fb_helper), GFP_KERNEL); |
| if (!fb_helper) { |
| dev_err(dev->dev, "no memory\n"); |
| return -ENOMEM; |
| } |
| |
| dev_priv->fb_helper = fb_helper; |
| |
| drm_fb_helper_prepare(dev, fb_helper, &psb_fb_helper_funcs); |
| |
| ret = drm_fb_helper_init(dev, fb_helper); |
| if (ret) |
| goto free; |
| |
| /* disable all the possible outputs/crtcs before entering KMS mode */ |
| drm_helper_disable_unused_functions(dev); |
| |
| ret = drm_fb_helper_initial_config(fb_helper, 32); |
| if (ret) |
| goto fini; |
| |
| return 0; |
| |
| fini: |
| drm_fb_helper_fini(fb_helper); |
| free: |
| kfree(fb_helper); |
| return ret; |
| } |
| |
| static void psb_fbdev_fini(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| |
| if (!dev_priv->fb_helper) |
| return; |
| |
| psb_fbdev_destroy(dev, dev_priv->fb_helper); |
| kfree(dev_priv->fb_helper); |
| dev_priv->fb_helper = NULL; |
| } |
| |
| static const struct drm_mode_config_funcs psb_mode_funcs = { |
| .fb_create = psb_user_framebuffer_create, |
| .output_poll_changed = drm_fb_helper_output_poll_changed, |
| }; |
| |
| static void psb_setup_outputs(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct drm_connector *connector; |
| |
| drm_mode_create_scaling_mode_property(dev); |
| |
| /* It is ok for this to fail - we just don't get backlight control */ |
| if (!dev_priv->backlight_property) |
| dev_priv->backlight_property = drm_property_create_range(dev, 0, |
| "backlight", 0, 100); |
| dev_priv->ops->output_init(dev); |
| |
| list_for_each_entry(connector, &dev->mode_config.connector_list, |
| head) { |
| struct gma_encoder *gma_encoder = gma_attached_encoder(connector); |
| struct drm_encoder *encoder = &gma_encoder->base; |
| int crtc_mask = 0, clone_mask = 0; |
| |
| /* valid crtcs */ |
| switch (gma_encoder->type) { |
| case INTEL_OUTPUT_ANALOG: |
| crtc_mask = (1 << 0); |
| clone_mask = (1 << INTEL_OUTPUT_ANALOG); |
| break; |
| case INTEL_OUTPUT_SDVO: |
| crtc_mask = dev_priv->ops->sdvo_mask; |
| clone_mask = 0; |
| break; |
| case INTEL_OUTPUT_LVDS: |
| crtc_mask = dev_priv->ops->lvds_mask; |
| clone_mask = 0; |
| break; |
| case INTEL_OUTPUT_MIPI: |
| crtc_mask = (1 << 0); |
| clone_mask = 0; |
| break; |
| case INTEL_OUTPUT_MIPI2: |
| crtc_mask = (1 << 2); |
| clone_mask = 0; |
| break; |
| case INTEL_OUTPUT_HDMI: |
| crtc_mask = dev_priv->ops->hdmi_mask; |
| clone_mask = (1 << INTEL_OUTPUT_HDMI); |
| break; |
| case INTEL_OUTPUT_DISPLAYPORT: |
| crtc_mask = (1 << 0) | (1 << 1); |
| clone_mask = 0; |
| break; |
| case INTEL_OUTPUT_EDP: |
| crtc_mask = (1 << 1); |
| clone_mask = 0; |
| } |
| encoder->possible_crtcs = crtc_mask; |
| encoder->possible_clones = |
| gma_connector_clones(dev, clone_mask); |
| } |
| } |
| |
| void psb_modeset_init(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; |
| struct pci_dev *pdev = to_pci_dev(dev->dev); |
| int i; |
| |
| drm_mode_config_init(dev); |
| |
| dev->mode_config.min_width = 0; |
| dev->mode_config.min_height = 0; |
| |
| dev->mode_config.funcs = &psb_mode_funcs; |
| |
| /* set memory base */ |
| /* Oaktrail and Poulsbo should use BAR 2*/ |
| pci_read_config_dword(pdev, PSB_BSM, (u32 *)&(dev->mode_config.fb_base)); |
| |
| /* num pipes is 2 for PSB but 1 for Mrst */ |
| for (i = 0; i < dev_priv->num_pipe; i++) |
| psb_intel_crtc_init(dev, i, mode_dev); |
| |
| dev->mode_config.max_width = 4096; |
| dev->mode_config.max_height = 4096; |
| |
| psb_setup_outputs(dev); |
| |
| if (dev_priv->ops->errata) |
| dev_priv->ops->errata(dev); |
| |
| dev_priv->modeset = true; |
| } |
| |
| void psb_modeset_cleanup(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| if (dev_priv->modeset) { |
| drm_kms_helper_poll_fini(dev); |
| psb_fbdev_fini(dev); |
| drm_mode_config_cleanup(dev); |
| } |
| } |