| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Freescale i.MX drm driver |
| * |
| * Copyright (C) 2011 Sascha Hauer, Pengutronix |
| */ |
| |
| #include <linux/component.h> |
| #include <linux/device.h> |
| #include <linux/dma-buf.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #include <video/imx-ipu-v3.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_managed.h> |
| #include <drm/drm_of.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_vblank.h> |
| |
| #include "imx-drm.h" |
| #include "ipuv3-plane.h" |
| |
| #define MAX_CRTC 4 |
| |
| static int legacyfb_depth = 16; |
| module_param(legacyfb_depth, int, 0444); |
| |
| DEFINE_DRM_GEM_CMA_FOPS(imx_drm_driver_fops); |
| |
| void imx_drm_connector_destroy(struct drm_connector *connector) |
| { |
| drm_connector_unregister(connector); |
| drm_connector_cleanup(connector); |
| } |
| EXPORT_SYMBOL_GPL(imx_drm_connector_destroy); |
| |
| static int imx_drm_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| int ret; |
| |
| ret = drm_atomic_helper_check(dev, state); |
| if (ret) |
| return ret; |
| |
| /* |
| * Check modeset again in case crtc_state->mode_changed is |
| * updated in plane's ->atomic_check callback. |
| */ |
| ret = drm_atomic_helper_check_modeset(dev, state); |
| if (ret) |
| return ret; |
| |
| /* Assign PRG/PRE channels and check if all constrains are satisfied. */ |
| ret = ipu_planes_assign_pre(dev, state); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| static const struct drm_mode_config_funcs imx_drm_mode_config_funcs = { |
| .fb_create = drm_gem_fb_create, |
| .atomic_check = imx_drm_atomic_check, |
| .atomic_commit = drm_atomic_helper_commit, |
| }; |
| |
| static void imx_drm_atomic_commit_tail(struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = state->dev; |
| struct drm_plane *plane; |
| struct drm_plane_state *old_plane_state, *new_plane_state; |
| bool plane_disabling = false; |
| int i; |
| |
| drm_atomic_helper_commit_modeset_disables(dev, state); |
| |
| drm_atomic_helper_commit_planes(dev, state, |
| DRM_PLANE_COMMIT_ACTIVE_ONLY | |
| DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET); |
| |
| drm_atomic_helper_commit_modeset_enables(dev, state); |
| |
| for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { |
| if (drm_atomic_plane_disabling(old_plane_state, new_plane_state)) |
| plane_disabling = true; |
| } |
| |
| /* |
| * The flip done wait is only strictly required by imx-drm if a deferred |
| * plane disable is in-flight. As the core requires blocking commits |
| * to wait for the flip it is done here unconditionally. This keeps the |
| * workitem around a bit longer than required for the majority of |
| * non-blocking commits, but we accept that for the sake of simplicity. |
| */ |
| drm_atomic_helper_wait_for_flip_done(dev, state); |
| |
| if (plane_disabling) { |
| for_each_old_plane_in_state(state, plane, old_plane_state, i) |
| ipu_plane_disable_deferred(plane); |
| |
| } |
| |
| drm_atomic_helper_commit_hw_done(state); |
| } |
| |
| static const struct drm_mode_config_helper_funcs imx_drm_mode_config_helpers = { |
| .atomic_commit_tail = imx_drm_atomic_commit_tail, |
| }; |
| |
| |
| int imx_drm_encoder_parse_of(struct drm_device *drm, |
| struct drm_encoder *encoder, struct device_node *np) |
| { |
| uint32_t crtc_mask = drm_of_find_possible_crtcs(drm, np); |
| |
| /* |
| * If we failed to find the CRTC(s) which this encoder is |
| * supposed to be connected to, it's because the CRTC has |
| * not been registered yet. Defer probing, and hope that |
| * the required CRTC is added later. |
| */ |
| if (crtc_mask == 0) |
| return -EPROBE_DEFER; |
| |
| encoder->possible_crtcs = crtc_mask; |
| |
| /* FIXME: cloning support not clear, disable it all for now */ |
| encoder->possible_clones = 0; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(imx_drm_encoder_parse_of); |
| |
| static const struct drm_ioctl_desc imx_drm_ioctls[] = { |
| /* none so far */ |
| }; |
| |
| static const struct drm_driver imx_drm_driver = { |
| .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC, |
| DRM_GEM_CMA_DRIVER_OPS, |
| .ioctls = imx_drm_ioctls, |
| .num_ioctls = ARRAY_SIZE(imx_drm_ioctls), |
| .fops = &imx_drm_driver_fops, |
| .name = "imx-drm", |
| .desc = "i.MX DRM graphics", |
| .date = "20120507", |
| .major = 1, |
| .minor = 0, |
| .patchlevel = 0, |
| }; |
| |
| static int compare_of(struct device *dev, void *data) |
| { |
| struct device_node *np = data; |
| |
| /* Special case for DI, dev->of_node may not be set yet */ |
| if (strcmp(dev->driver->name, "imx-ipuv3-crtc") == 0) { |
| struct ipu_client_platformdata *pdata = dev->platform_data; |
| |
| return pdata->of_node == np; |
| } |
| |
| /* Special case for LDB, one device for two channels */ |
| if (of_node_name_eq(np, "lvds-channel")) { |
| np = of_get_parent(np); |
| of_node_put(np); |
| } |
| |
| return dev->of_node == np; |
| } |
| |
| static int imx_drm_bind(struct device *dev) |
| { |
| struct drm_device *drm; |
| int ret; |
| |
| drm = drm_dev_alloc(&imx_drm_driver, dev); |
| if (IS_ERR(drm)) |
| return PTR_ERR(drm); |
| |
| /* |
| * enable drm irq mode. |
| * - with irq_enabled = true, we can use the vblank feature. |
| * |
| * P.S. note that we wouldn't use drm irq handler but |
| * just specific driver own one instead because |
| * drm framework supports only one irq handler and |
| * drivers can well take care of their interrupts |
| */ |
| drm->irq_enabled = true; |
| |
| /* |
| * set max width and height as default value(4096x4096). |
| * this value would be used to check framebuffer size limitation |
| * at drm_mode_addfb(). |
| */ |
| drm->mode_config.min_width = 1; |
| drm->mode_config.min_height = 1; |
| drm->mode_config.max_width = 4096; |
| drm->mode_config.max_height = 4096; |
| drm->mode_config.funcs = &imx_drm_mode_config_funcs; |
| drm->mode_config.helper_private = &imx_drm_mode_config_helpers; |
| drm->mode_config.allow_fb_modifiers = true; |
| drm->mode_config.normalize_zpos = true; |
| |
| ret = drmm_mode_config_init(drm); |
| if (ret) |
| return ret; |
| |
| ret = drm_vblank_init(drm, MAX_CRTC); |
| if (ret) |
| goto err_kms; |
| |
| dev_set_drvdata(dev, drm); |
| |
| /* Now try and bind all our sub-components */ |
| ret = component_bind_all(dev, drm); |
| if (ret) |
| goto err_kms; |
| |
| drm_mode_config_reset(drm); |
| |
| /* |
| * All components are now initialised, so setup the fb helper. |
| * The fb helper takes copies of key hardware information, so the |
| * crtcs/connectors/encoders must not change after this point. |
| */ |
| if (legacyfb_depth != 16 && legacyfb_depth != 32) { |
| dev_warn(dev, "Invalid legacyfb_depth. Defaulting to 16bpp\n"); |
| legacyfb_depth = 16; |
| } |
| |
| drm_kms_helper_poll_init(drm); |
| |
| ret = drm_dev_register(drm, 0); |
| if (ret) |
| goto err_poll_fini; |
| |
| drm_fbdev_generic_setup(drm, legacyfb_depth); |
| |
| return 0; |
| |
| err_poll_fini: |
| drm_kms_helper_poll_fini(drm); |
| component_unbind_all(drm->dev, drm); |
| err_kms: |
| drm_dev_put(drm); |
| |
| return ret; |
| } |
| |
| static void imx_drm_unbind(struct device *dev) |
| { |
| struct drm_device *drm = dev_get_drvdata(dev); |
| |
| drm_dev_unregister(drm); |
| |
| drm_kms_helper_poll_fini(drm); |
| |
| component_unbind_all(drm->dev, drm); |
| |
| drm_dev_put(drm); |
| |
| dev_set_drvdata(dev, NULL); |
| } |
| |
| static const struct component_master_ops imx_drm_ops = { |
| .bind = imx_drm_bind, |
| .unbind = imx_drm_unbind, |
| }; |
| |
| static int imx_drm_platform_probe(struct platform_device *pdev) |
| { |
| int ret = drm_of_component_probe(&pdev->dev, compare_of, &imx_drm_ops); |
| |
| if (!ret) |
| ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| |
| return ret; |
| } |
| |
| static int imx_drm_platform_remove(struct platform_device *pdev) |
| { |
| component_master_del(&pdev->dev, &imx_drm_ops); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int imx_drm_suspend(struct device *dev) |
| { |
| struct drm_device *drm_dev = dev_get_drvdata(dev); |
| |
| return drm_mode_config_helper_suspend(drm_dev); |
| } |
| |
| static int imx_drm_resume(struct device *dev) |
| { |
| struct drm_device *drm_dev = dev_get_drvdata(dev); |
| |
| return drm_mode_config_helper_resume(drm_dev); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(imx_drm_pm_ops, imx_drm_suspend, imx_drm_resume); |
| |
| static const struct of_device_id imx_drm_dt_ids[] = { |
| { .compatible = "fsl,imx-display-subsystem", }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, imx_drm_dt_ids); |
| |
| static struct platform_driver imx_drm_pdrv = { |
| .probe = imx_drm_platform_probe, |
| .remove = imx_drm_platform_remove, |
| .driver = { |
| .name = "imx-drm", |
| .pm = &imx_drm_pm_ops, |
| .of_match_table = imx_drm_dt_ids, |
| }, |
| }; |
| |
| static struct platform_driver * const drivers[] = { |
| &imx_drm_pdrv, |
| &ipu_drm_driver, |
| }; |
| |
| static int __init imx_drm_init(void) |
| { |
| return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); |
| } |
| module_init(imx_drm_init); |
| |
| static void __exit imx_drm_exit(void) |
| { |
| platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); |
| } |
| module_exit(imx_drm_exit); |
| |
| MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); |
| MODULE_DESCRIPTION("i.MX drm driver core"); |
| MODULE_LICENSE("GPL"); |