| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Sony IMX290 CMOS Image Sensor Driver |
| * |
| * Copyright (C) 2019 FRAMOS GmbH. |
| * |
| * Copyright (C) 2019 Linaro Ltd. |
| * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <media/media-entity.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/v4l2-subdev.h> |
| |
| #define IMX290_STANDBY 0x3000 |
| #define IMX290_REGHOLD 0x3001 |
| #define IMX290_XMSTA 0x3002 |
| #define IMX290_FR_FDG_SEL 0x3009 |
| #define IMX290_BLKLEVEL_LOW 0x300a |
| #define IMX290_BLKLEVEL_HIGH 0x300b |
| #define IMX290_GAIN 0x3014 |
| #define IMX290_HMAX_LOW 0x301c |
| #define IMX290_HMAX_HIGH 0x301d |
| #define IMX290_PGCTRL 0x308c |
| #define IMX290_PHY_LANE_NUM 0x3407 |
| #define IMX290_CSI_LANE_MODE 0x3443 |
| |
| #define IMX290_PGCTRL_REGEN BIT(0) |
| #define IMX290_PGCTRL_THRU BIT(1) |
| #define IMX290_PGCTRL_MODE(n) ((n) << 4) |
| |
| static const char * const imx290_supply_name[] = { |
| "vdda", |
| "vddd", |
| "vdddo", |
| }; |
| |
| #define IMX290_NUM_SUPPLIES ARRAY_SIZE(imx290_supply_name) |
| |
| struct imx290_regval { |
| u16 reg; |
| u8 val; |
| }; |
| |
| struct imx290_mode { |
| u32 width; |
| u32 height; |
| u32 hmax; |
| u8 link_freq_index; |
| |
| const struct imx290_regval *data; |
| u32 data_size; |
| }; |
| |
| struct imx290 { |
| struct device *dev; |
| struct clk *xclk; |
| struct regmap *regmap; |
| u8 nlanes; |
| u8 bpp; |
| |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_mbus_framefmt current_format; |
| const struct imx290_mode *current_mode; |
| |
| struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES]; |
| struct gpio_desc *rst_gpio; |
| |
| struct v4l2_ctrl_handler ctrls; |
| struct v4l2_ctrl *link_freq; |
| struct v4l2_ctrl *pixel_rate; |
| |
| struct mutex lock; |
| }; |
| |
| struct imx290_pixfmt { |
| u32 code; |
| u8 bpp; |
| }; |
| |
| static const struct imx290_pixfmt imx290_formats[] = { |
| { MEDIA_BUS_FMT_SRGGB10_1X10, 10 }, |
| { MEDIA_BUS_FMT_SRGGB12_1X12, 12 }, |
| }; |
| |
| static const struct regmap_config imx290_regmap_config = { |
| .reg_bits = 16, |
| .val_bits = 8, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static const char * const imx290_test_pattern_menu[] = { |
| "Disabled", |
| "Sequence Pattern 1", |
| "Horizontal Color-bar Chart", |
| "Vertical Color-bar Chart", |
| "Sequence Pattern 2", |
| "Gradation Pattern 1", |
| "Gradation Pattern 2", |
| "000/555h Toggle Pattern", |
| }; |
| |
| static const struct imx290_regval imx290_global_init_settings[] = { |
| { 0x3007, 0x00 }, |
| { 0x3018, 0x65 }, |
| { 0x3019, 0x04 }, |
| { 0x301a, 0x00 }, |
| { 0x3444, 0x20 }, |
| { 0x3445, 0x25 }, |
| { 0x303a, 0x0c }, |
| { 0x3040, 0x00 }, |
| { 0x3041, 0x00 }, |
| { 0x303c, 0x00 }, |
| { 0x303d, 0x00 }, |
| { 0x3042, 0x9c }, |
| { 0x3043, 0x07 }, |
| { 0x303e, 0x49 }, |
| { 0x303f, 0x04 }, |
| { 0x304b, 0x0a }, |
| { 0x300f, 0x00 }, |
| { 0x3010, 0x21 }, |
| { 0x3012, 0x64 }, |
| { 0x3016, 0x09 }, |
| { 0x3070, 0x02 }, |
| { 0x3071, 0x11 }, |
| { 0x309b, 0x10 }, |
| { 0x309c, 0x22 }, |
| { 0x30a2, 0x02 }, |
| { 0x30a6, 0x20 }, |
| { 0x30a8, 0x20 }, |
| { 0x30aa, 0x20 }, |
| { 0x30ac, 0x20 }, |
| { 0x30b0, 0x43 }, |
| { 0x3119, 0x9e }, |
| { 0x311c, 0x1e }, |
| { 0x311e, 0x08 }, |
| { 0x3128, 0x05 }, |
| { 0x313d, 0x83 }, |
| { 0x3150, 0x03 }, |
| { 0x317e, 0x00 }, |
| { 0x32b8, 0x50 }, |
| { 0x32b9, 0x10 }, |
| { 0x32ba, 0x00 }, |
| { 0x32bb, 0x04 }, |
| { 0x32c8, 0x50 }, |
| { 0x32c9, 0x10 }, |
| { 0x32ca, 0x00 }, |
| { 0x32cb, 0x04 }, |
| { 0x332c, 0xd3 }, |
| { 0x332d, 0x10 }, |
| { 0x332e, 0x0d }, |
| { 0x3358, 0x06 }, |
| { 0x3359, 0xe1 }, |
| { 0x335a, 0x11 }, |
| { 0x3360, 0x1e }, |
| { 0x3361, 0x61 }, |
| { 0x3362, 0x10 }, |
| { 0x33b0, 0x50 }, |
| { 0x33b2, 0x1a }, |
| { 0x33b3, 0x04 }, |
| }; |
| |
| static const struct imx290_regval imx290_1080p_settings[] = { |
| /* mode settings */ |
| { 0x3007, 0x00 }, |
| { 0x303a, 0x0c }, |
| { 0x3414, 0x0a }, |
| { 0x3472, 0x80 }, |
| { 0x3473, 0x07 }, |
| { 0x3418, 0x38 }, |
| { 0x3419, 0x04 }, |
| { 0x3012, 0x64 }, |
| { 0x3013, 0x00 }, |
| { 0x305c, 0x18 }, |
| { 0x305d, 0x03 }, |
| { 0x305e, 0x20 }, |
| { 0x305f, 0x01 }, |
| { 0x315e, 0x1a }, |
| { 0x3164, 0x1a }, |
| { 0x3480, 0x49 }, |
| /* data rate settings */ |
| { 0x3405, 0x10 }, |
| { 0x3446, 0x57 }, |
| { 0x3447, 0x00 }, |
| { 0x3448, 0x37 }, |
| { 0x3449, 0x00 }, |
| { 0x344a, 0x1f }, |
| { 0x344b, 0x00 }, |
| { 0x344c, 0x1f }, |
| { 0x344d, 0x00 }, |
| { 0x344e, 0x1f }, |
| { 0x344f, 0x00 }, |
| { 0x3450, 0x77 }, |
| { 0x3451, 0x00 }, |
| { 0x3452, 0x1f }, |
| { 0x3453, 0x00 }, |
| { 0x3454, 0x17 }, |
| { 0x3455, 0x00 }, |
| }; |
| |
| static const struct imx290_regval imx290_720p_settings[] = { |
| /* mode settings */ |
| { 0x3007, 0x10 }, |
| { 0x303a, 0x06 }, |
| { 0x3414, 0x04 }, |
| { 0x3472, 0x00 }, |
| { 0x3473, 0x05 }, |
| { 0x3418, 0xd0 }, |
| { 0x3419, 0x02 }, |
| { 0x3012, 0x64 }, |
| { 0x3013, 0x00 }, |
| { 0x305c, 0x20 }, |
| { 0x305d, 0x00 }, |
| { 0x305e, 0x20 }, |
| { 0x305f, 0x01 }, |
| { 0x315e, 0x1a }, |
| { 0x3164, 0x1a }, |
| { 0x3480, 0x49 }, |
| /* data rate settings */ |
| { 0x3405, 0x10 }, |
| { 0x3446, 0x4f }, |
| { 0x3447, 0x00 }, |
| { 0x3448, 0x2f }, |
| { 0x3449, 0x00 }, |
| { 0x344a, 0x17 }, |
| { 0x344b, 0x00 }, |
| { 0x344c, 0x17 }, |
| { 0x344d, 0x00 }, |
| { 0x344e, 0x17 }, |
| { 0x344f, 0x00 }, |
| { 0x3450, 0x57 }, |
| { 0x3451, 0x00 }, |
| { 0x3452, 0x17 }, |
| { 0x3453, 0x00 }, |
| { 0x3454, 0x17 }, |
| { 0x3455, 0x00 }, |
| }; |
| |
| static const struct imx290_regval imx290_10bit_settings[] = { |
| { 0x3005, 0x00}, |
| { 0x3046, 0x00}, |
| { 0x3129, 0x1d}, |
| { 0x317c, 0x12}, |
| { 0x31ec, 0x37}, |
| { 0x3441, 0x0a}, |
| { 0x3442, 0x0a}, |
| { 0x300a, 0x3c}, |
| { 0x300b, 0x00}, |
| }; |
| |
| static const struct imx290_regval imx290_12bit_settings[] = { |
| { 0x3005, 0x01 }, |
| { 0x3046, 0x01 }, |
| { 0x3129, 0x00 }, |
| { 0x317c, 0x00 }, |
| { 0x31ec, 0x0e }, |
| { 0x3441, 0x0c }, |
| { 0x3442, 0x0c }, |
| { 0x300a, 0xf0 }, |
| { 0x300b, 0x00 }, |
| }; |
| |
| /* supported link frequencies */ |
| #define FREQ_INDEX_1080P 0 |
| #define FREQ_INDEX_720P 1 |
| static const s64 imx290_link_freq_2lanes[] = { |
| [FREQ_INDEX_1080P] = 445500000, |
| [FREQ_INDEX_720P] = 297000000, |
| }; |
| static const s64 imx290_link_freq_4lanes[] = { |
| [FREQ_INDEX_1080P] = 222750000, |
| [FREQ_INDEX_720P] = 148500000, |
| }; |
| |
| /* |
| * In this function and in the similar ones below We rely on imx290_probe() |
| * to ensure that nlanes is either 2 or 4. |
| */ |
| static inline const s64 *imx290_link_freqs_ptr(const struct imx290 *imx290) |
| { |
| if (imx290->nlanes == 2) |
| return imx290_link_freq_2lanes; |
| else |
| return imx290_link_freq_4lanes; |
| } |
| |
| static inline int imx290_link_freqs_num(const struct imx290 *imx290) |
| { |
| if (imx290->nlanes == 2) |
| return ARRAY_SIZE(imx290_link_freq_2lanes); |
| else |
| return ARRAY_SIZE(imx290_link_freq_4lanes); |
| } |
| |
| /* Mode configs */ |
| static const struct imx290_mode imx290_modes_2lanes[] = { |
| { |
| .width = 1920, |
| .height = 1080, |
| .hmax = 0x1130, |
| .link_freq_index = FREQ_INDEX_1080P, |
| .data = imx290_1080p_settings, |
| .data_size = ARRAY_SIZE(imx290_1080p_settings), |
| }, |
| { |
| .width = 1280, |
| .height = 720, |
| .hmax = 0x19c8, |
| .link_freq_index = FREQ_INDEX_720P, |
| .data = imx290_720p_settings, |
| .data_size = ARRAY_SIZE(imx290_720p_settings), |
| }, |
| }; |
| |
| static const struct imx290_mode imx290_modes_4lanes[] = { |
| { |
| .width = 1920, |
| .height = 1080, |
| .hmax = 0x0898, |
| .link_freq_index = FREQ_INDEX_1080P, |
| .data = imx290_1080p_settings, |
| .data_size = ARRAY_SIZE(imx290_1080p_settings), |
| }, |
| { |
| .width = 1280, |
| .height = 720, |
| .hmax = 0x0ce4, |
| .link_freq_index = FREQ_INDEX_720P, |
| .data = imx290_720p_settings, |
| .data_size = ARRAY_SIZE(imx290_720p_settings), |
| }, |
| }; |
| |
| static inline const struct imx290_mode *imx290_modes_ptr(const struct imx290 *imx290) |
| { |
| if (imx290->nlanes == 2) |
| return imx290_modes_2lanes; |
| else |
| return imx290_modes_4lanes; |
| } |
| |
| static inline int imx290_modes_num(const struct imx290 *imx290) |
| { |
| if (imx290->nlanes == 2) |
| return ARRAY_SIZE(imx290_modes_2lanes); |
| else |
| return ARRAY_SIZE(imx290_modes_4lanes); |
| } |
| |
| static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd) |
| { |
| return container_of(_sd, struct imx290, sd); |
| } |
| |
| static inline int imx290_read_reg(struct imx290 *imx290, u16 addr, u8 *value) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(imx290->regmap, addr, ®val); |
| if (ret) { |
| dev_err(imx290->dev, "I2C read failed for addr: %x\n", addr); |
| return ret; |
| } |
| |
| *value = regval & 0xff; |
| |
| return 0; |
| } |
| |
| static int imx290_write_reg(struct imx290 *imx290, u16 addr, u8 value) |
| { |
| int ret; |
| |
| ret = regmap_write(imx290->regmap, addr, value); |
| if (ret) { |
| dev_err(imx290->dev, "I2C write failed for addr: %x\n", addr); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int imx290_set_register_array(struct imx290 *imx290, |
| const struct imx290_regval *settings, |
| unsigned int num_settings) |
| { |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < num_settings; ++i, ++settings) { |
| ret = imx290_write_reg(imx290, settings->reg, settings->val); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* Provide 10ms settle time */ |
| usleep_range(10000, 11000); |
| |
| return 0; |
| } |
| |
| static int imx290_write_buffered_reg(struct imx290 *imx290, u16 address_low, |
| u8 nr_regs, u32 value) |
| { |
| unsigned int i; |
| int ret; |
| |
| ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x01); |
| if (ret) { |
| dev_err(imx290->dev, "Error setting hold register\n"); |
| return ret; |
| } |
| |
| for (i = 0; i < nr_regs; i++) { |
| ret = imx290_write_reg(imx290, address_low + i, |
| (u8)(value >> (i * 8))); |
| if (ret) { |
| dev_err(imx290->dev, "Error writing buffered registers\n"); |
| return ret; |
| } |
| } |
| |
| ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x00); |
| if (ret) { |
| dev_err(imx290->dev, "Error setting hold register\n"); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int imx290_set_gain(struct imx290 *imx290, u32 value) |
| { |
| int ret; |
| |
| ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, value); |
| if (ret) |
| dev_err(imx290->dev, "Unable to write gain\n"); |
| |
| return ret; |
| } |
| |
| /* Stop streaming */ |
| static int imx290_stop_streaming(struct imx290 *imx290) |
| { |
| int ret; |
| |
| ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x01); |
| if (ret < 0) |
| return ret; |
| |
| msleep(30); |
| |
| return imx290_write_reg(imx290, IMX290_XMSTA, 0x01); |
| } |
| |
| static int imx290_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct imx290 *imx290 = container_of(ctrl->handler, |
| struct imx290, ctrls); |
| int ret = 0; |
| |
| /* V4L2 controls values will be applied only when power is already up */ |
| if (!pm_runtime_get_if_in_use(imx290->dev)) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_GAIN: |
| ret = imx290_set_gain(imx290, ctrl->val); |
| break; |
| case V4L2_CID_TEST_PATTERN: |
| if (ctrl->val) { |
| imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x00); |
| imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00); |
| usleep_range(10000, 11000); |
| imx290_write_reg(imx290, IMX290_PGCTRL, |
| (u8)(IMX290_PGCTRL_REGEN | |
| IMX290_PGCTRL_THRU | |
| IMX290_PGCTRL_MODE(ctrl->val))); |
| } else { |
| imx290_write_reg(imx290, IMX290_PGCTRL, 0x00); |
| usleep_range(10000, 11000); |
| if (imx290->bpp == 10) |
| imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, |
| 0x3c); |
| else /* 12 bits per pixel */ |
| imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, |
| 0xf0); |
| imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00); |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| pm_runtime_put(imx290->dev); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops imx290_ctrl_ops = { |
| .s_ctrl = imx290_set_ctrl, |
| }; |
| |
| static int imx290_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index >= ARRAY_SIZE(imx290_formats)) |
| return -EINVAL; |
| |
| code->code = imx290_formats[code->index].code; |
| |
| return 0; |
| } |
| |
| static int imx290_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| const struct imx290 *imx290 = to_imx290(sd); |
| const struct imx290_mode *imx290_modes = imx290_modes_ptr(imx290); |
| |
| if ((fse->code != imx290_formats[0].code) && |
| (fse->code != imx290_formats[1].code)) |
| return -EINVAL; |
| |
| if (fse->index >= imx290_modes_num(imx290)) |
| return -EINVAL; |
| |
| fse->min_width = imx290_modes[fse->index].width; |
| fse->max_width = imx290_modes[fse->index].width; |
| fse->min_height = imx290_modes[fse->index].height; |
| fse->max_height = imx290_modes[fse->index].height; |
| |
| return 0; |
| } |
| |
| static int imx290_get_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct imx290 *imx290 = to_imx290(sd); |
| struct v4l2_mbus_framefmt *framefmt; |
| |
| mutex_lock(&imx290->lock); |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) |
| framefmt = v4l2_subdev_get_try_format(&imx290->sd, cfg, |
| fmt->pad); |
| else |
| framefmt = &imx290->current_format; |
| |
| fmt->format = *framefmt; |
| |
| mutex_unlock(&imx290->lock); |
| |
| return 0; |
| } |
| |
| static inline u8 imx290_get_link_freq_index(struct imx290 *imx290) |
| { |
| return imx290->current_mode->link_freq_index; |
| } |
| |
| static s64 imx290_get_link_freq(struct imx290 *imx290) |
| { |
| u8 index = imx290_get_link_freq_index(imx290); |
| |
| return *(imx290_link_freqs_ptr(imx290) + index); |
| } |
| |
| static u64 imx290_calc_pixel_rate(struct imx290 *imx290) |
| { |
| s64 link_freq = imx290_get_link_freq(imx290); |
| u8 nlanes = imx290->nlanes; |
| u64 pixel_rate; |
| |
| /* pixel rate = link_freq * 2 * nr_of_lanes / bits_per_sample */ |
| pixel_rate = link_freq * 2 * nlanes; |
| do_div(pixel_rate, imx290->bpp); |
| return pixel_rate; |
| } |
| |
| static int imx290_set_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct imx290 *imx290 = to_imx290(sd); |
| const struct imx290_mode *mode; |
| struct v4l2_mbus_framefmt *format; |
| unsigned int i; |
| |
| mutex_lock(&imx290->lock); |
| |
| mode = v4l2_find_nearest_size(imx290_modes_ptr(imx290), |
| imx290_modes_num(imx290), width, height, |
| fmt->format.width, fmt->format.height); |
| |
| fmt->format.width = mode->width; |
| fmt->format.height = mode->height; |
| |
| for (i = 0; i < ARRAY_SIZE(imx290_formats); i++) |
| if (imx290_formats[i].code == fmt->format.code) |
| break; |
| |
| if (i >= ARRAY_SIZE(imx290_formats)) |
| i = 0; |
| |
| fmt->format.code = imx290_formats[i].code; |
| fmt->format.field = V4L2_FIELD_NONE; |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| format = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); |
| } else { |
| format = &imx290->current_format; |
| imx290->current_mode = mode; |
| imx290->bpp = imx290_formats[i].bpp; |
| |
| if (imx290->link_freq) |
| __v4l2_ctrl_s_ctrl(imx290->link_freq, |
| imx290_get_link_freq_index(imx290)); |
| if (imx290->pixel_rate) |
| __v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate, |
| imx290_calc_pixel_rate(imx290)); |
| } |
| |
| *format = fmt->format; |
| |
| mutex_unlock(&imx290->lock); |
| |
| return 0; |
| } |
| |
| static int imx290_entity_init_cfg(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg) |
| { |
| struct v4l2_subdev_format fmt = { 0 }; |
| |
| fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; |
| fmt.format.width = 1920; |
| fmt.format.height = 1080; |
| |
| imx290_set_fmt(subdev, cfg, &fmt); |
| |
| return 0; |
| } |
| |
| static int imx290_write_current_format(struct imx290 *imx290) |
| { |
| int ret; |
| |
| switch (imx290->current_format.code) { |
| case MEDIA_BUS_FMT_SRGGB10_1X10: |
| ret = imx290_set_register_array(imx290, imx290_10bit_settings, |
| ARRAY_SIZE( |
| imx290_10bit_settings)); |
| if (ret < 0) { |
| dev_err(imx290->dev, "Could not set format registers\n"); |
| return ret; |
| } |
| break; |
| case MEDIA_BUS_FMT_SRGGB12_1X12: |
| ret = imx290_set_register_array(imx290, imx290_12bit_settings, |
| ARRAY_SIZE( |
| imx290_12bit_settings)); |
| if (ret < 0) { |
| dev_err(imx290->dev, "Could not set format registers\n"); |
| return ret; |
| } |
| break; |
| default: |
| dev_err(imx290->dev, "Unknown pixel format\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int imx290_set_hmax(struct imx290 *imx290, u32 val) |
| { |
| int ret; |
| |
| ret = imx290_write_reg(imx290, IMX290_HMAX_LOW, (val & 0xff)); |
| if (ret) { |
| dev_err(imx290->dev, "Error setting HMAX register\n"); |
| return ret; |
| } |
| |
| ret = imx290_write_reg(imx290, IMX290_HMAX_HIGH, ((val >> 8) & 0xff)); |
| if (ret) { |
| dev_err(imx290->dev, "Error setting HMAX register\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* Start streaming */ |
| static int imx290_start_streaming(struct imx290 *imx290) |
| { |
| int ret; |
| |
| /* Set init register settings */ |
| ret = imx290_set_register_array(imx290, imx290_global_init_settings, |
| ARRAY_SIZE( |
| imx290_global_init_settings)); |
| if (ret < 0) { |
| dev_err(imx290->dev, "Could not set init registers\n"); |
| return ret; |
| } |
| |
| /* Apply the register values related to current frame format */ |
| ret = imx290_write_current_format(imx290); |
| if (ret < 0) { |
| dev_err(imx290->dev, "Could not set frame format\n"); |
| return ret; |
| } |
| |
| /* Apply default values of current mode */ |
| ret = imx290_set_register_array(imx290, imx290->current_mode->data, |
| imx290->current_mode->data_size); |
| if (ret < 0) { |
| dev_err(imx290->dev, "Could not set current mode\n"); |
| return ret; |
| } |
| ret = imx290_set_hmax(imx290, imx290->current_mode->hmax); |
| if (ret < 0) |
| return ret; |
| |
| /* Apply customized values from user */ |
| ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler); |
| if (ret) { |
| dev_err(imx290->dev, "Could not sync v4l2 controls\n"); |
| return ret; |
| } |
| |
| ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x00); |
| if (ret < 0) |
| return ret; |
| |
| msleep(30); |
| |
| /* Start streaming */ |
| return imx290_write_reg(imx290, IMX290_XMSTA, 0x00); |
| } |
| |
| static int imx290_set_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct imx290 *imx290 = to_imx290(sd); |
| int ret = 0; |
| |
| if (enable) { |
| ret = pm_runtime_get_sync(imx290->dev); |
| if (ret < 0) { |
| pm_runtime_put_noidle(imx290->dev); |
| goto unlock_and_return; |
| } |
| |
| ret = imx290_start_streaming(imx290); |
| if (ret) { |
| dev_err(imx290->dev, "Start stream failed\n"); |
| pm_runtime_put(imx290->dev); |
| goto unlock_and_return; |
| } |
| } else { |
| imx290_stop_streaming(imx290); |
| pm_runtime_put(imx290->dev); |
| } |
| |
| unlock_and_return: |
| |
| return ret; |
| } |
| |
| static int imx290_get_regulators(struct device *dev, struct imx290 *imx290) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < IMX290_NUM_SUPPLIES; i++) |
| imx290->supplies[i].supply = imx290_supply_name[i]; |
| |
| return devm_regulator_bulk_get(dev, IMX290_NUM_SUPPLIES, |
| imx290->supplies); |
| } |
| |
| static int imx290_set_data_lanes(struct imx290 *imx290) |
| { |
| int ret = 0, laneval, frsel; |
| |
| switch (imx290->nlanes) { |
| case 2: |
| laneval = 0x01; |
| frsel = 0x02; |
| break; |
| case 4: |
| laneval = 0x03; |
| frsel = 0x01; |
| break; |
| default: |
| /* |
| * We should never hit this since the data lane count is |
| * validated in probe itself |
| */ |
| dev_err(imx290->dev, "Lane configuration not supported\n"); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| ret = imx290_write_reg(imx290, IMX290_PHY_LANE_NUM, laneval); |
| if (ret) { |
| dev_err(imx290->dev, "Error setting Physical Lane number register\n"); |
| goto exit; |
| } |
| |
| ret = imx290_write_reg(imx290, IMX290_CSI_LANE_MODE, laneval); |
| if (ret) { |
| dev_err(imx290->dev, "Error setting CSI Lane mode register\n"); |
| goto exit; |
| } |
| |
| ret = imx290_write_reg(imx290, IMX290_FR_FDG_SEL, frsel); |
| if (ret) |
| dev_err(imx290->dev, "Error setting FR/FDG SEL register\n"); |
| |
| exit: |
| return ret; |
| } |
| |
| static int imx290_power_on(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct imx290 *imx290 = to_imx290(sd); |
| int ret; |
| |
| ret = clk_prepare_enable(imx290->xclk); |
| if (ret) { |
| dev_err(dev, "Failed to enable clock\n"); |
| return ret; |
| } |
| |
| ret = regulator_bulk_enable(IMX290_NUM_SUPPLIES, imx290->supplies); |
| if (ret) { |
| dev_err(dev, "Failed to enable regulators\n"); |
| clk_disable_unprepare(imx290->xclk); |
| return ret; |
| } |
| |
| usleep_range(1, 2); |
| gpiod_set_value_cansleep(imx290->rst_gpio, 0); |
| usleep_range(30000, 31000); |
| |
| /* Set data lane count */ |
| imx290_set_data_lanes(imx290); |
| |
| return 0; |
| } |
| |
| static int imx290_power_off(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct imx290 *imx290 = to_imx290(sd); |
| |
| clk_disable_unprepare(imx290->xclk); |
| gpiod_set_value_cansleep(imx290->rst_gpio, 1); |
| regulator_bulk_disable(IMX290_NUM_SUPPLIES, imx290->supplies); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops imx290_pm_ops = { |
| SET_RUNTIME_PM_OPS(imx290_power_off, imx290_power_on, NULL) |
| }; |
| |
| static const struct v4l2_subdev_video_ops imx290_video_ops = { |
| .s_stream = imx290_set_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops imx290_pad_ops = { |
| .init_cfg = imx290_entity_init_cfg, |
| .enum_mbus_code = imx290_enum_mbus_code, |
| .enum_frame_size = imx290_enum_frame_size, |
| .get_fmt = imx290_get_fmt, |
| .set_fmt = imx290_set_fmt, |
| }; |
| |
| static const struct v4l2_subdev_ops imx290_subdev_ops = { |
| .video = &imx290_video_ops, |
| .pad = &imx290_pad_ops, |
| }; |
| |
| static const struct media_entity_operations imx290_subdev_entity_ops = { |
| .link_validate = v4l2_subdev_link_validate, |
| }; |
| |
| /* |
| * Returns 0 if all link frequencies used by the driver for the given number |
| * of MIPI data lanes are mentioned in the device tree, or the value of the |
| * first missing frequency otherwise. |
| */ |
| static s64 imx290_check_link_freqs(const struct imx290 *imx290, |
| const struct v4l2_fwnode_endpoint *ep) |
| { |
| int i, j; |
| const s64 *freqs = imx290_link_freqs_ptr(imx290); |
| int freqs_count = imx290_link_freqs_num(imx290); |
| |
| for (i = 0; i < freqs_count; i++) { |
| for (j = 0; j < ep->nr_of_link_frequencies; j++) |
| if (freqs[i] == ep->link_frequencies[j]) |
| break; |
| if (j == ep->nr_of_link_frequencies) |
| return freqs[i]; |
| } |
| return 0; |
| } |
| |
| static int imx290_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct fwnode_handle *endpoint; |
| /* Only CSI2 is supported for now: */ |
| struct v4l2_fwnode_endpoint ep = { |
| .bus_type = V4L2_MBUS_CSI2_DPHY |
| }; |
| struct imx290 *imx290; |
| u32 xclk_freq; |
| s64 fq; |
| int ret; |
| |
| imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL); |
| if (!imx290) |
| return -ENOMEM; |
| |
| imx290->dev = dev; |
| imx290->regmap = devm_regmap_init_i2c(client, &imx290_regmap_config); |
| if (IS_ERR(imx290->regmap)) { |
| dev_err(dev, "Unable to initialize I2C\n"); |
| return -ENODEV; |
| } |
| |
| endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); |
| if (!endpoint) { |
| dev_err(dev, "Endpoint node not found\n"); |
| return -EINVAL; |
| } |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep); |
| fwnode_handle_put(endpoint); |
| if (ret == -ENXIO) { |
| dev_err(dev, "Unsupported bus type, should be CSI2\n"); |
| goto free_err; |
| } else if (ret) { |
| dev_err(dev, "Parsing endpoint node failed\n"); |
| goto free_err; |
| } |
| |
| /* Get number of data lanes */ |
| imx290->nlanes = ep.bus.mipi_csi2.num_data_lanes; |
| if (imx290->nlanes != 2 && imx290->nlanes != 4) { |
| dev_err(dev, "Invalid data lanes: %d\n", imx290->nlanes); |
| ret = -EINVAL; |
| goto free_err; |
| } |
| |
| dev_dbg(dev, "Using %u data lanes\n", imx290->nlanes); |
| |
| if (!ep.nr_of_link_frequencies) { |
| dev_err(dev, "link-frequency property not found in DT\n"); |
| ret = -EINVAL; |
| goto free_err; |
| } |
| |
| /* Check that link frequences for all the modes are in device tree */ |
| fq = imx290_check_link_freqs(imx290, &ep); |
| if (fq) { |
| dev_err(dev, "Link frequency of %lld is not supported\n", fq); |
| ret = -EINVAL; |
| goto free_err; |
| } |
| |
| /* get system clock (xclk) */ |
| imx290->xclk = devm_clk_get(dev, "xclk"); |
| if (IS_ERR(imx290->xclk)) { |
| dev_err(dev, "Could not get xclk"); |
| ret = PTR_ERR(imx290->xclk); |
| goto free_err; |
| } |
| |
| ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency", |
| &xclk_freq); |
| if (ret) { |
| dev_err(dev, "Could not get xclk frequency\n"); |
| goto free_err; |
| } |
| |
| /* external clock must be 37.125 MHz */ |
| if (xclk_freq != 37125000) { |
| dev_err(dev, "External clock frequency %u is not supported\n", |
| xclk_freq); |
| ret = -EINVAL; |
| goto free_err; |
| } |
| |
| ret = clk_set_rate(imx290->xclk, xclk_freq); |
| if (ret) { |
| dev_err(dev, "Could not set xclk frequency\n"); |
| goto free_err; |
| } |
| |
| ret = imx290_get_regulators(dev, imx290); |
| if (ret < 0) { |
| dev_err(dev, "Cannot get regulators\n"); |
| goto free_err; |
| } |
| |
| imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(imx290->rst_gpio)) { |
| dev_err(dev, "Cannot get reset gpio\n"); |
| ret = PTR_ERR(imx290->rst_gpio); |
| goto free_err; |
| } |
| |
| mutex_init(&imx290->lock); |
| |
| /* |
| * Initialize the frame format. In particular, imx290->current_mode |
| * and imx290->bpp are set to defaults: imx290_calc_pixel_rate() call |
| * below relies on these fields. |
| */ |
| imx290_entity_init_cfg(&imx290->sd, NULL); |
| |
| v4l2_ctrl_handler_init(&imx290->ctrls, 4); |
| |
| v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, |
| V4L2_CID_GAIN, 0, 72, 1, 0); |
| |
| imx290->link_freq = |
| v4l2_ctrl_new_int_menu(&imx290->ctrls, &imx290_ctrl_ops, |
| V4L2_CID_LINK_FREQ, |
| imx290_link_freqs_num(imx290) - 1, 0, |
| imx290_link_freqs_ptr(imx290)); |
| if (imx290->link_freq) |
| imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, |
| 1, INT_MAX, 1, |
| imx290_calc_pixel_rate(imx290)); |
| |
| v4l2_ctrl_new_std_menu_items(&imx290->ctrls, &imx290_ctrl_ops, |
| V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(imx290_test_pattern_menu) - 1, |
| 0, 0, imx290_test_pattern_menu); |
| |
| imx290->sd.ctrl_handler = &imx290->ctrls; |
| |
| if (imx290->ctrls.error) { |
| dev_err(dev, "Control initialization error %d\n", |
| imx290->ctrls.error); |
| ret = imx290->ctrls.error; |
| goto free_ctrl; |
| } |
| |
| v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops); |
| imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| imx290->sd.dev = &client->dev; |
| imx290->sd.entity.ops = &imx290_subdev_entity_ops; |
| imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| |
| imx290->pad.flags = MEDIA_PAD_FL_SOURCE; |
| ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad); |
| if (ret < 0) { |
| dev_err(dev, "Could not register media entity\n"); |
| goto free_ctrl; |
| } |
| |
| ret = v4l2_async_register_subdev(&imx290->sd); |
| if (ret < 0) { |
| dev_err(dev, "Could not register v4l2 device\n"); |
| goto free_entity; |
| } |
| |
| /* Power on the device to match runtime PM state below */ |
| ret = imx290_power_on(dev); |
| if (ret < 0) { |
| dev_err(dev, "Could not power on the device\n"); |
| goto free_entity; |
| } |
| |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| pm_runtime_idle(dev); |
| |
| v4l2_fwnode_endpoint_free(&ep); |
| |
| return 0; |
| |
| free_entity: |
| media_entity_cleanup(&imx290->sd.entity); |
| free_ctrl: |
| v4l2_ctrl_handler_free(&imx290->ctrls); |
| mutex_destroy(&imx290->lock); |
| free_err: |
| v4l2_fwnode_endpoint_free(&ep); |
| |
| return ret; |
| } |
| |
| static int imx290_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct imx290 *imx290 = to_imx290(sd); |
| |
| v4l2_async_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| |
| mutex_destroy(&imx290->lock); |
| |
| pm_runtime_disable(imx290->dev); |
| if (!pm_runtime_status_suspended(imx290->dev)) |
| imx290_power_off(imx290->dev); |
| pm_runtime_set_suspended(imx290->dev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id imx290_of_match[] = { |
| { .compatible = "sony,imx290" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, imx290_of_match); |
| |
| static struct i2c_driver imx290_i2c_driver = { |
| .probe_new = imx290_probe, |
| .remove = imx290_remove, |
| .driver = { |
| .name = "imx290", |
| .pm = &imx290_pm_ops, |
| .of_match_table = of_match_ptr(imx290_of_match), |
| }, |
| }; |
| |
| module_i2c_driver(imx290_i2c_driver); |
| |
| MODULE_DESCRIPTION("Sony IMX290 CMOS Image Sensor Driver"); |
| MODULE_AUTHOR("FRAMOS GmbH"); |
| MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); |
| MODULE_LICENSE("GPL v2"); |