| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Thunderbolt driver - bus logic (NHI independent) |
| * |
| * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com> |
| * Copyright (C) 2019, Intel Corporation |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "tb.h" |
| #include "tb_regs.h" |
| #include "tunnel.h" |
| |
| /** |
| * struct tb_cm - Simple Thunderbolt connection manager |
| * @tunnel_list: List of active tunnels |
| * @dp_resources: List of available DP resources for DP tunneling |
| * @hotplug_active: tb_handle_hotplug will stop progressing plug |
| * events and exit if this is not set (it needs to |
| * acquire the lock one more time). Used to drain wq |
| * after cfg has been paused. |
| * @remove_work: Work used to remove any unplugged routers after |
| * runtime resume |
| */ |
| struct tb_cm { |
| struct list_head tunnel_list; |
| struct list_head dp_resources; |
| bool hotplug_active; |
| struct delayed_work remove_work; |
| }; |
| |
| static inline struct tb *tcm_to_tb(struct tb_cm *tcm) |
| { |
| return ((void *)tcm - sizeof(struct tb)); |
| } |
| |
| struct tb_hotplug_event { |
| struct work_struct work; |
| struct tb *tb; |
| u64 route; |
| u8 port; |
| bool unplug; |
| }; |
| |
| static void tb_handle_hotplug(struct work_struct *work); |
| |
| static void tb_queue_hotplug(struct tb *tb, u64 route, u8 port, bool unplug) |
| { |
| struct tb_hotplug_event *ev; |
| |
| ev = kmalloc(sizeof(*ev), GFP_KERNEL); |
| if (!ev) |
| return; |
| |
| ev->tb = tb; |
| ev->route = route; |
| ev->port = port; |
| ev->unplug = unplug; |
| INIT_WORK(&ev->work, tb_handle_hotplug); |
| queue_work(tb->wq, &ev->work); |
| } |
| |
| /* enumeration & hot plug handling */ |
| |
| static void tb_add_dp_resources(struct tb_switch *sw) |
| { |
| struct tb_cm *tcm = tb_priv(sw->tb); |
| struct tb_port *port; |
| |
| tb_switch_for_each_port(sw, port) { |
| if (!tb_port_is_dpin(port)) |
| continue; |
| |
| if (!tb_switch_query_dp_resource(sw, port)) |
| continue; |
| |
| list_add_tail(&port->list, &tcm->dp_resources); |
| tb_port_dbg(port, "DP IN resource available\n"); |
| } |
| } |
| |
| static void tb_remove_dp_resources(struct tb_switch *sw) |
| { |
| struct tb_cm *tcm = tb_priv(sw->tb); |
| struct tb_port *port, *tmp; |
| |
| /* Clear children resources first */ |
| tb_switch_for_each_port(sw, port) { |
| if (tb_port_has_remote(port)) |
| tb_remove_dp_resources(port->remote->sw); |
| } |
| |
| list_for_each_entry_safe(port, tmp, &tcm->dp_resources, list) { |
| if (port->sw == sw) { |
| tb_port_dbg(port, "DP OUT resource unavailable\n"); |
| list_del_init(&port->list); |
| } |
| } |
| } |
| |
| static void tb_discover_tunnels(struct tb_switch *sw) |
| { |
| struct tb *tb = sw->tb; |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_port *port; |
| |
| tb_switch_for_each_port(sw, port) { |
| struct tb_tunnel *tunnel = NULL; |
| |
| switch (port->config.type) { |
| case TB_TYPE_DP_HDMI_IN: |
| tunnel = tb_tunnel_discover_dp(tb, port); |
| break; |
| |
| case TB_TYPE_PCIE_DOWN: |
| tunnel = tb_tunnel_discover_pci(tb, port); |
| break; |
| |
| case TB_TYPE_USB3_DOWN: |
| tunnel = tb_tunnel_discover_usb3(tb, port); |
| break; |
| |
| default: |
| break; |
| } |
| |
| if (!tunnel) |
| continue; |
| |
| if (tb_tunnel_is_pci(tunnel)) { |
| struct tb_switch *parent = tunnel->dst_port->sw; |
| |
| while (parent != tunnel->src_port->sw) { |
| parent->boot = true; |
| parent = tb_switch_parent(parent); |
| } |
| } |
| |
| list_add_tail(&tunnel->list, &tcm->tunnel_list); |
| } |
| |
| tb_switch_for_each_port(sw, port) { |
| if (tb_port_has_remote(port)) |
| tb_discover_tunnels(port->remote->sw); |
| } |
| } |
| |
| static int tb_port_configure_xdomain(struct tb_port *port) |
| { |
| /* |
| * XDomain paths currently only support single lane so we must |
| * disable the other lane according to USB4 spec. |
| */ |
| tb_port_disable(port->dual_link_port); |
| |
| if (tb_switch_is_usb4(port->sw)) |
| return usb4_port_configure_xdomain(port); |
| return tb_lc_configure_xdomain(port); |
| } |
| |
| static void tb_port_unconfigure_xdomain(struct tb_port *port) |
| { |
| if (tb_switch_is_usb4(port->sw)) |
| usb4_port_unconfigure_xdomain(port); |
| else |
| tb_lc_unconfigure_xdomain(port); |
| |
| tb_port_enable(port->dual_link_port); |
| } |
| |
| static void tb_scan_xdomain(struct tb_port *port) |
| { |
| struct tb_switch *sw = port->sw; |
| struct tb *tb = sw->tb; |
| struct tb_xdomain *xd; |
| u64 route; |
| |
| if (!tb_is_xdomain_enabled()) |
| return; |
| |
| route = tb_downstream_route(port); |
| xd = tb_xdomain_find_by_route(tb, route); |
| if (xd) { |
| tb_xdomain_put(xd); |
| return; |
| } |
| |
| xd = tb_xdomain_alloc(tb, &sw->dev, route, tb->root_switch->uuid, |
| NULL); |
| if (xd) { |
| tb_port_at(route, sw)->xdomain = xd; |
| tb_port_configure_xdomain(port); |
| tb_xdomain_add(xd); |
| } |
| } |
| |
| static int tb_enable_tmu(struct tb_switch *sw) |
| { |
| int ret; |
| |
| /* If it is already enabled in correct mode, don't touch it */ |
| if (tb_switch_tmu_is_enabled(sw)) |
| return 0; |
| |
| ret = tb_switch_tmu_disable(sw); |
| if (ret) |
| return ret; |
| |
| ret = tb_switch_tmu_post_time(sw); |
| if (ret) |
| return ret; |
| |
| return tb_switch_tmu_enable(sw); |
| } |
| |
| /** |
| * tb_find_unused_port() - return the first inactive port on @sw |
| * @sw: Switch to find the port on |
| * @type: Port type to look for |
| */ |
| static struct tb_port *tb_find_unused_port(struct tb_switch *sw, |
| enum tb_port_type type) |
| { |
| struct tb_port *port; |
| |
| tb_switch_for_each_port(sw, port) { |
| if (tb_is_upstream_port(port)) |
| continue; |
| if (port->config.type != type) |
| continue; |
| if (!port->cap_adap) |
| continue; |
| if (tb_port_is_enabled(port)) |
| continue; |
| return port; |
| } |
| return NULL; |
| } |
| |
| static struct tb_port *tb_find_usb3_down(struct tb_switch *sw, |
| const struct tb_port *port) |
| { |
| struct tb_port *down; |
| |
| down = usb4_switch_map_usb3_down(sw, port); |
| if (down && !tb_usb3_port_is_enabled(down)) |
| return down; |
| return NULL; |
| } |
| |
| static struct tb_tunnel *tb_find_tunnel(struct tb *tb, enum tb_tunnel_type type, |
| struct tb_port *src_port, |
| struct tb_port *dst_port) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_tunnel *tunnel; |
| |
| list_for_each_entry(tunnel, &tcm->tunnel_list, list) { |
| if (tunnel->type == type && |
| ((src_port && src_port == tunnel->src_port) || |
| (dst_port && dst_port == tunnel->dst_port))) { |
| return tunnel; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static struct tb_tunnel *tb_find_first_usb3_tunnel(struct tb *tb, |
| struct tb_port *src_port, |
| struct tb_port *dst_port) |
| { |
| struct tb_port *port, *usb3_down; |
| struct tb_switch *sw; |
| |
| /* Pick the router that is deepest in the topology */ |
| if (dst_port->sw->config.depth > src_port->sw->config.depth) |
| sw = dst_port->sw; |
| else |
| sw = src_port->sw; |
| |
| /* Can't be the host router */ |
| if (sw == tb->root_switch) |
| return NULL; |
| |
| /* Find the downstream USB4 port that leads to this router */ |
| port = tb_port_at(tb_route(sw), tb->root_switch); |
| /* Find the corresponding host router USB3 downstream port */ |
| usb3_down = usb4_switch_map_usb3_down(tb->root_switch, port); |
| if (!usb3_down) |
| return NULL; |
| |
| return tb_find_tunnel(tb, TB_TUNNEL_USB3, usb3_down, NULL); |
| } |
| |
| static int tb_available_bandwidth(struct tb *tb, struct tb_port *src_port, |
| struct tb_port *dst_port, int *available_up, int *available_down) |
| { |
| int usb3_consumed_up, usb3_consumed_down, ret; |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_tunnel *tunnel; |
| struct tb_port *port; |
| |
| tb_port_dbg(dst_port, "calculating available bandwidth\n"); |
| |
| tunnel = tb_find_first_usb3_tunnel(tb, src_port, dst_port); |
| if (tunnel) { |
| ret = tb_tunnel_consumed_bandwidth(tunnel, &usb3_consumed_up, |
| &usb3_consumed_down); |
| if (ret) |
| return ret; |
| } else { |
| usb3_consumed_up = 0; |
| usb3_consumed_down = 0; |
| } |
| |
| *available_up = *available_down = 40000; |
| |
| /* Find the minimum available bandwidth over all links */ |
| tb_for_each_port_on_path(src_port, dst_port, port) { |
| int link_speed, link_width, up_bw, down_bw; |
| |
| if (!tb_port_is_null(port)) |
| continue; |
| |
| if (tb_is_upstream_port(port)) { |
| link_speed = port->sw->link_speed; |
| } else { |
| link_speed = tb_port_get_link_speed(port); |
| if (link_speed < 0) |
| return link_speed; |
| } |
| |
| link_width = port->bonded ? 2 : 1; |
| |
| up_bw = link_speed * link_width * 1000; /* Mb/s */ |
| /* Leave 10% guard band */ |
| up_bw -= up_bw / 10; |
| down_bw = up_bw; |
| |
| tb_port_dbg(port, "link total bandwidth %d Mb/s\n", up_bw); |
| |
| /* |
| * Find all DP tunnels that cross the port and reduce |
| * their consumed bandwidth from the available. |
| */ |
| list_for_each_entry(tunnel, &tcm->tunnel_list, list) { |
| int dp_consumed_up, dp_consumed_down; |
| |
| if (!tb_tunnel_is_dp(tunnel)) |
| continue; |
| |
| if (!tb_tunnel_port_on_path(tunnel, port)) |
| continue; |
| |
| ret = tb_tunnel_consumed_bandwidth(tunnel, |
| &dp_consumed_up, |
| &dp_consumed_down); |
| if (ret) |
| return ret; |
| |
| up_bw -= dp_consumed_up; |
| down_bw -= dp_consumed_down; |
| } |
| |
| /* |
| * If USB3 is tunneled from the host router down to the |
| * branch leading to port we need to take USB3 consumed |
| * bandwidth into account regardless whether it actually |
| * crosses the port. |
| */ |
| up_bw -= usb3_consumed_up; |
| down_bw -= usb3_consumed_down; |
| |
| if (up_bw < *available_up) |
| *available_up = up_bw; |
| if (down_bw < *available_down) |
| *available_down = down_bw; |
| } |
| |
| if (*available_up < 0) |
| *available_up = 0; |
| if (*available_down < 0) |
| *available_down = 0; |
| |
| return 0; |
| } |
| |
| static int tb_release_unused_usb3_bandwidth(struct tb *tb, |
| struct tb_port *src_port, |
| struct tb_port *dst_port) |
| { |
| struct tb_tunnel *tunnel; |
| |
| tunnel = tb_find_first_usb3_tunnel(tb, src_port, dst_port); |
| return tunnel ? tb_tunnel_release_unused_bandwidth(tunnel) : 0; |
| } |
| |
| static void tb_reclaim_usb3_bandwidth(struct tb *tb, struct tb_port *src_port, |
| struct tb_port *dst_port) |
| { |
| int ret, available_up, available_down; |
| struct tb_tunnel *tunnel; |
| |
| tunnel = tb_find_first_usb3_tunnel(tb, src_port, dst_port); |
| if (!tunnel) |
| return; |
| |
| tb_dbg(tb, "reclaiming unused bandwidth for USB3\n"); |
| |
| /* |
| * Calculate available bandwidth for the first hop USB3 tunnel. |
| * That determines the whole USB3 bandwidth for this branch. |
| */ |
| ret = tb_available_bandwidth(tb, tunnel->src_port, tunnel->dst_port, |
| &available_up, &available_down); |
| if (ret) { |
| tb_warn(tb, "failed to calculate available bandwidth\n"); |
| return; |
| } |
| |
| tb_dbg(tb, "available bandwidth for USB3 %d/%d Mb/s\n", |
| available_up, available_down); |
| |
| tb_tunnel_reclaim_available_bandwidth(tunnel, &available_up, &available_down); |
| } |
| |
| static int tb_tunnel_usb3(struct tb *tb, struct tb_switch *sw) |
| { |
| struct tb_switch *parent = tb_switch_parent(sw); |
| int ret, available_up, available_down; |
| struct tb_port *up, *down, *port; |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_tunnel *tunnel; |
| |
| if (!tb_acpi_may_tunnel_usb3()) { |
| tb_dbg(tb, "USB3 tunneling disabled, not creating tunnel\n"); |
| return 0; |
| } |
| |
| up = tb_switch_find_port(sw, TB_TYPE_USB3_UP); |
| if (!up) |
| return 0; |
| |
| if (!sw->link_usb4) |
| return 0; |
| |
| /* |
| * Look up available down port. Since we are chaining it should |
| * be found right above this switch. |
| */ |
| port = tb_port_at(tb_route(sw), parent); |
| down = tb_find_usb3_down(parent, port); |
| if (!down) |
| return 0; |
| |
| if (tb_route(parent)) { |
| struct tb_port *parent_up; |
| /* |
| * Check first that the parent switch has its upstream USB3 |
| * port enabled. Otherwise the chain is not complete and |
| * there is no point setting up a new tunnel. |
| */ |
| parent_up = tb_switch_find_port(parent, TB_TYPE_USB3_UP); |
| if (!parent_up || !tb_port_is_enabled(parent_up)) |
| return 0; |
| |
| /* Make all unused bandwidth available for the new tunnel */ |
| ret = tb_release_unused_usb3_bandwidth(tb, down, up); |
| if (ret) |
| return ret; |
| } |
| |
| ret = tb_available_bandwidth(tb, down, up, &available_up, |
| &available_down); |
| if (ret) |
| goto err_reclaim; |
| |
| tb_port_dbg(up, "available bandwidth for new USB3 tunnel %d/%d Mb/s\n", |
| available_up, available_down); |
| |
| tunnel = tb_tunnel_alloc_usb3(tb, up, down, available_up, |
| available_down); |
| if (!tunnel) { |
| ret = -ENOMEM; |
| goto err_reclaim; |
| } |
| |
| if (tb_tunnel_activate(tunnel)) { |
| tb_port_info(up, |
| "USB3 tunnel activation failed, aborting\n"); |
| ret = -EIO; |
| goto err_free; |
| } |
| |
| list_add_tail(&tunnel->list, &tcm->tunnel_list); |
| if (tb_route(parent)) |
| tb_reclaim_usb3_bandwidth(tb, down, up); |
| |
| return 0; |
| |
| err_free: |
| tb_tunnel_free(tunnel); |
| err_reclaim: |
| if (tb_route(parent)) |
| tb_reclaim_usb3_bandwidth(tb, down, up); |
| |
| return ret; |
| } |
| |
| static int tb_create_usb3_tunnels(struct tb_switch *sw) |
| { |
| struct tb_port *port; |
| int ret; |
| |
| if (!tb_acpi_may_tunnel_usb3()) |
| return 0; |
| |
| if (tb_route(sw)) { |
| ret = tb_tunnel_usb3(sw->tb, sw); |
| if (ret) |
| return ret; |
| } |
| |
| tb_switch_for_each_port(sw, port) { |
| if (!tb_port_has_remote(port)) |
| continue; |
| ret = tb_create_usb3_tunnels(port->remote->sw); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void tb_scan_port(struct tb_port *port); |
| |
| /* |
| * tb_scan_switch() - scan for and initialize downstream switches |
| */ |
| static void tb_scan_switch(struct tb_switch *sw) |
| { |
| struct tb_port *port; |
| |
| pm_runtime_get_sync(&sw->dev); |
| |
| tb_switch_for_each_port(sw, port) |
| tb_scan_port(port); |
| |
| pm_runtime_mark_last_busy(&sw->dev); |
| pm_runtime_put_autosuspend(&sw->dev); |
| } |
| |
| /* |
| * tb_scan_port() - check for and initialize switches below port |
| */ |
| static void tb_scan_port(struct tb_port *port) |
| { |
| struct tb_cm *tcm = tb_priv(port->sw->tb); |
| struct tb_port *upstream_port; |
| struct tb_switch *sw; |
| |
| if (tb_is_upstream_port(port)) |
| return; |
| |
| if (tb_port_is_dpout(port) && tb_dp_port_hpd_is_active(port) == 1 && |
| !tb_dp_port_is_enabled(port)) { |
| tb_port_dbg(port, "DP adapter HPD set, queuing hotplug\n"); |
| tb_queue_hotplug(port->sw->tb, tb_route(port->sw), port->port, |
| false); |
| return; |
| } |
| |
| if (port->config.type != TB_TYPE_PORT) |
| return; |
| if (port->dual_link_port && port->link_nr) |
| return; /* |
| * Downstream switch is reachable through two ports. |
| * Only scan on the primary port (link_nr == 0). |
| */ |
| if (tb_wait_for_port(port, false) <= 0) |
| return; |
| if (port->remote) { |
| tb_port_dbg(port, "port already has a remote\n"); |
| return; |
| } |
| |
| tb_retimer_scan(port); |
| |
| sw = tb_switch_alloc(port->sw->tb, &port->sw->dev, |
| tb_downstream_route(port)); |
| if (IS_ERR(sw)) { |
| /* |
| * If there is an error accessing the connected switch |
| * it may be connected to another domain. Also we allow |
| * the other domain to be connected to a max depth switch. |
| */ |
| if (PTR_ERR(sw) == -EIO || PTR_ERR(sw) == -EADDRNOTAVAIL) |
| tb_scan_xdomain(port); |
| return; |
| } |
| |
| if (tb_switch_configure(sw)) { |
| tb_switch_put(sw); |
| return; |
| } |
| |
| /* |
| * If there was previously another domain connected remove it |
| * first. |
| */ |
| if (port->xdomain) { |
| tb_xdomain_remove(port->xdomain); |
| tb_port_unconfigure_xdomain(port); |
| port->xdomain = NULL; |
| } |
| |
| /* |
| * Do not send uevents until we have discovered all existing |
| * tunnels and know which switches were authorized already by |
| * the boot firmware. |
| */ |
| if (!tcm->hotplug_active) |
| dev_set_uevent_suppress(&sw->dev, true); |
| |
| /* |
| * At the moment Thunderbolt 2 and beyond (devices with LC) we |
| * can support runtime PM. |
| */ |
| sw->rpm = sw->generation > 1; |
| |
| if (tb_switch_add(sw)) { |
| tb_switch_put(sw); |
| return; |
| } |
| |
| /* Link the switches using both links if available */ |
| upstream_port = tb_upstream_port(sw); |
| port->remote = upstream_port; |
| upstream_port->remote = port; |
| if (port->dual_link_port && upstream_port->dual_link_port) { |
| port->dual_link_port->remote = upstream_port->dual_link_port; |
| upstream_port->dual_link_port->remote = port->dual_link_port; |
| } |
| |
| /* Enable lane bonding if supported */ |
| tb_switch_lane_bonding_enable(sw); |
| /* Set the link configured */ |
| tb_switch_configure_link(sw); |
| |
| if (tb_enable_tmu(sw)) |
| tb_sw_warn(sw, "failed to enable TMU\n"); |
| |
| /* Scan upstream retimers */ |
| tb_retimer_scan(upstream_port); |
| |
| /* |
| * Create USB 3.x tunnels only when the switch is plugged to the |
| * domain. This is because we scan the domain also during discovery |
| * and want to discover existing USB 3.x tunnels before we create |
| * any new. |
| */ |
| if (tcm->hotplug_active && tb_tunnel_usb3(sw->tb, sw)) |
| tb_sw_warn(sw, "USB3 tunnel creation failed\n"); |
| |
| tb_add_dp_resources(sw); |
| tb_scan_switch(sw); |
| } |
| |
| static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel) |
| { |
| struct tb_port *src_port, *dst_port; |
| struct tb *tb; |
| |
| if (!tunnel) |
| return; |
| |
| tb_tunnel_deactivate(tunnel); |
| list_del(&tunnel->list); |
| |
| tb = tunnel->tb; |
| src_port = tunnel->src_port; |
| dst_port = tunnel->dst_port; |
| |
| switch (tunnel->type) { |
| case TB_TUNNEL_DP: |
| /* |
| * In case of DP tunnel make sure the DP IN resource is |
| * deallocated properly. |
| */ |
| tb_switch_dealloc_dp_resource(src_port->sw, src_port); |
| /* Now we can allow the domain to runtime suspend again */ |
| pm_runtime_mark_last_busy(&dst_port->sw->dev); |
| pm_runtime_put_autosuspend(&dst_port->sw->dev); |
| pm_runtime_mark_last_busy(&src_port->sw->dev); |
| pm_runtime_put_autosuspend(&src_port->sw->dev); |
| fallthrough; |
| |
| case TB_TUNNEL_USB3: |
| tb_reclaim_usb3_bandwidth(tb, src_port, dst_port); |
| break; |
| |
| default: |
| /* |
| * PCIe and DMA tunnels do not consume guaranteed |
| * bandwidth. |
| */ |
| break; |
| } |
| |
| tb_tunnel_free(tunnel); |
| } |
| |
| /* |
| * tb_free_invalid_tunnels() - destroy tunnels of devices that have gone away |
| */ |
| static void tb_free_invalid_tunnels(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_tunnel *tunnel; |
| struct tb_tunnel *n; |
| |
| list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { |
| if (tb_tunnel_is_invalid(tunnel)) |
| tb_deactivate_and_free_tunnel(tunnel); |
| } |
| } |
| |
| /* |
| * tb_free_unplugged_children() - traverse hierarchy and free unplugged switches |
| */ |
| static void tb_free_unplugged_children(struct tb_switch *sw) |
| { |
| struct tb_port *port; |
| |
| tb_switch_for_each_port(sw, port) { |
| if (!tb_port_has_remote(port)) |
| continue; |
| |
| if (port->remote->sw->is_unplugged) { |
| tb_retimer_remove_all(port); |
| tb_remove_dp_resources(port->remote->sw); |
| tb_switch_unconfigure_link(port->remote->sw); |
| tb_switch_lane_bonding_disable(port->remote->sw); |
| tb_switch_remove(port->remote->sw); |
| port->remote = NULL; |
| if (port->dual_link_port) |
| port->dual_link_port->remote = NULL; |
| } else { |
| tb_free_unplugged_children(port->remote->sw); |
| } |
| } |
| } |
| |
| static struct tb_port *tb_find_pcie_down(struct tb_switch *sw, |
| const struct tb_port *port) |
| { |
| struct tb_port *down = NULL; |
| |
| /* |
| * To keep plugging devices consistently in the same PCIe |
| * hierarchy, do mapping here for switch downstream PCIe ports. |
| */ |
| if (tb_switch_is_usb4(sw)) { |
| down = usb4_switch_map_pcie_down(sw, port); |
| } else if (!tb_route(sw)) { |
| int phy_port = tb_phy_port_from_link(port->port); |
| int index; |
| |
| /* |
| * Hard-coded Thunderbolt port to PCIe down port mapping |
| * per controller. |
| */ |
| if (tb_switch_is_cactus_ridge(sw) || |
| tb_switch_is_alpine_ridge(sw)) |
| index = !phy_port ? 6 : 7; |
| else if (tb_switch_is_falcon_ridge(sw)) |
| index = !phy_port ? 6 : 8; |
| else if (tb_switch_is_titan_ridge(sw)) |
| index = !phy_port ? 8 : 9; |
| else |
| goto out; |
| |
| /* Validate the hard-coding */ |
| if (WARN_ON(index > sw->config.max_port_number)) |
| goto out; |
| |
| down = &sw->ports[index]; |
| } |
| |
| if (down) { |
| if (WARN_ON(!tb_port_is_pcie_down(down))) |
| goto out; |
| if (tb_pci_port_is_enabled(down)) |
| goto out; |
| |
| return down; |
| } |
| |
| out: |
| return tb_find_unused_port(sw, TB_TYPE_PCIE_DOWN); |
| } |
| |
| static struct tb_port *tb_find_dp_out(struct tb *tb, struct tb_port *in) |
| { |
| struct tb_port *host_port, *port; |
| struct tb_cm *tcm = tb_priv(tb); |
| |
| host_port = tb_route(in->sw) ? |
| tb_port_at(tb_route(in->sw), tb->root_switch) : NULL; |
| |
| list_for_each_entry(port, &tcm->dp_resources, list) { |
| if (!tb_port_is_dpout(port)) |
| continue; |
| |
| if (tb_port_is_enabled(port)) { |
| tb_port_dbg(port, "in use\n"); |
| continue; |
| } |
| |
| tb_port_dbg(port, "DP OUT available\n"); |
| |
| /* |
| * Keep the DP tunnel under the topology starting from |
| * the same host router downstream port. |
| */ |
| if (host_port && tb_route(port->sw)) { |
| struct tb_port *p; |
| |
| p = tb_port_at(tb_route(port->sw), tb->root_switch); |
| if (p != host_port) |
| continue; |
| } |
| |
| return port; |
| } |
| |
| return NULL; |
| } |
| |
| static void tb_tunnel_dp(struct tb *tb) |
| { |
| int available_up, available_down, ret; |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_port *port, *in, *out; |
| struct tb_tunnel *tunnel; |
| |
| if (!tb_acpi_may_tunnel_dp()) { |
| tb_dbg(tb, "DP tunneling disabled, not creating tunnel\n"); |
| return; |
| } |
| |
| /* |
| * Find pair of inactive DP IN and DP OUT adapters and then |
| * establish a DP tunnel between them. |
| */ |
| tb_dbg(tb, "looking for DP IN <-> DP OUT pairs:\n"); |
| |
| in = NULL; |
| out = NULL; |
| list_for_each_entry(port, &tcm->dp_resources, list) { |
| if (!tb_port_is_dpin(port)) |
| continue; |
| |
| if (tb_port_is_enabled(port)) { |
| tb_port_dbg(port, "in use\n"); |
| continue; |
| } |
| |
| tb_port_dbg(port, "DP IN available\n"); |
| |
| out = tb_find_dp_out(tb, port); |
| if (out) { |
| in = port; |
| break; |
| } |
| } |
| |
| if (!in) { |
| tb_dbg(tb, "no suitable DP IN adapter available, not tunneling\n"); |
| return; |
| } |
| if (!out) { |
| tb_dbg(tb, "no suitable DP OUT adapter available, not tunneling\n"); |
| return; |
| } |
| |
| /* |
| * DP stream needs the domain to be active so runtime resume |
| * both ends of the tunnel. |
| * |
| * This should bring the routers in the middle active as well |
| * and keeps the domain from runtime suspending while the DP |
| * tunnel is active. |
| */ |
| pm_runtime_get_sync(&in->sw->dev); |
| pm_runtime_get_sync(&out->sw->dev); |
| |
| if (tb_switch_alloc_dp_resource(in->sw, in)) { |
| tb_port_dbg(in, "no resource available for DP IN, not tunneling\n"); |
| goto err_rpm_put; |
| } |
| |
| /* Make all unused USB3 bandwidth available for the new DP tunnel */ |
| ret = tb_release_unused_usb3_bandwidth(tb, in, out); |
| if (ret) { |
| tb_warn(tb, "failed to release unused bandwidth\n"); |
| goto err_dealloc_dp; |
| } |
| |
| ret = tb_available_bandwidth(tb, in, out, &available_up, |
| &available_down); |
| if (ret) |
| goto err_reclaim; |
| |
| tb_dbg(tb, "available bandwidth for new DP tunnel %u/%u Mb/s\n", |
| available_up, available_down); |
| |
| tunnel = tb_tunnel_alloc_dp(tb, in, out, available_up, available_down); |
| if (!tunnel) { |
| tb_port_dbg(out, "could not allocate DP tunnel\n"); |
| goto err_reclaim; |
| } |
| |
| if (tb_tunnel_activate(tunnel)) { |
| tb_port_info(out, "DP tunnel activation failed, aborting\n"); |
| goto err_free; |
| } |
| |
| list_add_tail(&tunnel->list, &tcm->tunnel_list); |
| tb_reclaim_usb3_bandwidth(tb, in, out); |
| return; |
| |
| err_free: |
| tb_tunnel_free(tunnel); |
| err_reclaim: |
| tb_reclaim_usb3_bandwidth(tb, in, out); |
| err_dealloc_dp: |
| tb_switch_dealloc_dp_resource(in->sw, in); |
| err_rpm_put: |
| pm_runtime_mark_last_busy(&out->sw->dev); |
| pm_runtime_put_autosuspend(&out->sw->dev); |
| pm_runtime_mark_last_busy(&in->sw->dev); |
| pm_runtime_put_autosuspend(&in->sw->dev); |
| } |
| |
| static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port) |
| { |
| struct tb_port *in, *out; |
| struct tb_tunnel *tunnel; |
| |
| if (tb_port_is_dpin(port)) { |
| tb_port_dbg(port, "DP IN resource unavailable\n"); |
| in = port; |
| out = NULL; |
| } else { |
| tb_port_dbg(port, "DP OUT resource unavailable\n"); |
| in = NULL; |
| out = port; |
| } |
| |
| tunnel = tb_find_tunnel(tb, TB_TUNNEL_DP, in, out); |
| tb_deactivate_and_free_tunnel(tunnel); |
| list_del_init(&port->list); |
| |
| /* |
| * See if there is another DP OUT port that can be used for |
| * to create another tunnel. |
| */ |
| tb_tunnel_dp(tb); |
| } |
| |
| static void tb_dp_resource_available(struct tb *tb, struct tb_port *port) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_port *p; |
| |
| if (tb_port_is_enabled(port)) |
| return; |
| |
| list_for_each_entry(p, &tcm->dp_resources, list) { |
| if (p == port) |
| return; |
| } |
| |
| tb_port_dbg(port, "DP %s resource available\n", |
| tb_port_is_dpin(port) ? "IN" : "OUT"); |
| list_add_tail(&port->list, &tcm->dp_resources); |
| |
| /* Look for suitable DP IN <-> DP OUT pairs now */ |
| tb_tunnel_dp(tb); |
| } |
| |
| static void tb_disconnect_and_release_dp(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_tunnel *tunnel, *n; |
| |
| /* |
| * Tear down all DP tunnels and release their resources. They |
| * will be re-established after resume based on plug events. |
| */ |
| list_for_each_entry_safe_reverse(tunnel, n, &tcm->tunnel_list, list) { |
| if (tb_tunnel_is_dp(tunnel)) |
| tb_deactivate_and_free_tunnel(tunnel); |
| } |
| |
| while (!list_empty(&tcm->dp_resources)) { |
| struct tb_port *port; |
| |
| port = list_first_entry(&tcm->dp_resources, |
| struct tb_port, list); |
| list_del_init(&port->list); |
| } |
| } |
| |
| static int tb_disconnect_pci(struct tb *tb, struct tb_switch *sw) |
| { |
| struct tb_tunnel *tunnel; |
| struct tb_port *up; |
| |
| up = tb_switch_find_port(sw, TB_TYPE_PCIE_UP); |
| if (WARN_ON(!up)) |
| return -ENODEV; |
| |
| tunnel = tb_find_tunnel(tb, TB_TUNNEL_PCI, NULL, up); |
| if (WARN_ON(!tunnel)) |
| return -ENODEV; |
| |
| tb_tunnel_deactivate(tunnel); |
| list_del(&tunnel->list); |
| tb_tunnel_free(tunnel); |
| return 0; |
| } |
| |
| static int tb_tunnel_pci(struct tb *tb, struct tb_switch *sw) |
| { |
| struct tb_port *up, *down, *port; |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_switch *parent_sw; |
| struct tb_tunnel *tunnel; |
| |
| up = tb_switch_find_port(sw, TB_TYPE_PCIE_UP); |
| if (!up) |
| return 0; |
| |
| /* |
| * Look up available down port. Since we are chaining it should |
| * be found right above this switch. |
| */ |
| parent_sw = tb_to_switch(sw->dev.parent); |
| port = tb_port_at(tb_route(sw), parent_sw); |
| down = tb_find_pcie_down(parent_sw, port); |
| if (!down) |
| return 0; |
| |
| tunnel = tb_tunnel_alloc_pci(tb, up, down); |
| if (!tunnel) |
| return -ENOMEM; |
| |
| if (tb_tunnel_activate(tunnel)) { |
| tb_port_info(up, |
| "PCIe tunnel activation failed, aborting\n"); |
| tb_tunnel_free(tunnel); |
| return -EIO; |
| } |
| |
| list_add_tail(&tunnel->list, &tcm->tunnel_list); |
| return 0; |
| } |
| |
| static int tb_approve_xdomain_paths(struct tb *tb, struct tb_xdomain *xd) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_port *nhi_port, *dst_port; |
| struct tb_tunnel *tunnel; |
| struct tb_switch *sw; |
| |
| sw = tb_to_switch(xd->dev.parent); |
| dst_port = tb_port_at(xd->route, sw); |
| nhi_port = tb_switch_find_port(tb->root_switch, TB_TYPE_NHI); |
| |
| mutex_lock(&tb->lock); |
| tunnel = tb_tunnel_alloc_dma(tb, nhi_port, dst_port, xd->transmit_ring, |
| xd->transmit_path, xd->receive_ring, |
| xd->receive_path); |
| if (!tunnel) { |
| mutex_unlock(&tb->lock); |
| return -ENOMEM; |
| } |
| |
| if (tb_tunnel_activate(tunnel)) { |
| tb_port_info(nhi_port, |
| "DMA tunnel activation failed, aborting\n"); |
| tb_tunnel_free(tunnel); |
| mutex_unlock(&tb->lock); |
| return -EIO; |
| } |
| |
| list_add_tail(&tunnel->list, &tcm->tunnel_list); |
| mutex_unlock(&tb->lock); |
| return 0; |
| } |
| |
| static void __tb_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd) |
| { |
| struct tb_port *dst_port; |
| struct tb_tunnel *tunnel; |
| struct tb_switch *sw; |
| |
| sw = tb_to_switch(xd->dev.parent); |
| dst_port = tb_port_at(xd->route, sw); |
| |
| /* |
| * It is possible that the tunnel was already teared down (in |
| * case of cable disconnect) so it is fine if we cannot find it |
| * here anymore. |
| */ |
| tunnel = tb_find_tunnel(tb, TB_TUNNEL_DMA, NULL, dst_port); |
| tb_deactivate_and_free_tunnel(tunnel); |
| } |
| |
| static int tb_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd) |
| { |
| if (!xd->is_unplugged) { |
| mutex_lock(&tb->lock); |
| __tb_disconnect_xdomain_paths(tb, xd); |
| mutex_unlock(&tb->lock); |
| } |
| return 0; |
| } |
| |
| /* hotplug handling */ |
| |
| /* |
| * tb_handle_hotplug() - handle hotplug event |
| * |
| * Executes on tb->wq. |
| */ |
| static void tb_handle_hotplug(struct work_struct *work) |
| { |
| struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work); |
| struct tb *tb = ev->tb; |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_switch *sw; |
| struct tb_port *port; |
| |
| /* Bring the domain back from sleep if it was suspended */ |
| pm_runtime_get_sync(&tb->dev); |
| |
| mutex_lock(&tb->lock); |
| if (!tcm->hotplug_active) |
| goto out; /* during init, suspend or shutdown */ |
| |
| sw = tb_switch_find_by_route(tb, ev->route); |
| if (!sw) { |
| tb_warn(tb, |
| "hotplug event from non existent switch %llx:%x (unplug: %d)\n", |
| ev->route, ev->port, ev->unplug); |
| goto out; |
| } |
| if (ev->port > sw->config.max_port_number) { |
| tb_warn(tb, |
| "hotplug event from non existent port %llx:%x (unplug: %d)\n", |
| ev->route, ev->port, ev->unplug); |
| goto put_sw; |
| } |
| port = &sw->ports[ev->port]; |
| if (tb_is_upstream_port(port)) { |
| tb_dbg(tb, "hotplug event for upstream port %llx:%x (unplug: %d)\n", |
| ev->route, ev->port, ev->unplug); |
| goto put_sw; |
| } |
| |
| pm_runtime_get_sync(&sw->dev); |
| |
| if (ev->unplug) { |
| tb_retimer_remove_all(port); |
| |
| if (tb_port_has_remote(port)) { |
| tb_port_dbg(port, "switch unplugged\n"); |
| tb_sw_set_unplugged(port->remote->sw); |
| tb_free_invalid_tunnels(tb); |
| tb_remove_dp_resources(port->remote->sw); |
| tb_switch_tmu_disable(port->remote->sw); |
| tb_switch_unconfigure_link(port->remote->sw); |
| tb_switch_lane_bonding_disable(port->remote->sw); |
| tb_switch_remove(port->remote->sw); |
| port->remote = NULL; |
| if (port->dual_link_port) |
| port->dual_link_port->remote = NULL; |
| /* Maybe we can create another DP tunnel */ |
| tb_tunnel_dp(tb); |
| } else if (port->xdomain) { |
| struct tb_xdomain *xd = tb_xdomain_get(port->xdomain); |
| |
| tb_port_dbg(port, "xdomain unplugged\n"); |
| /* |
| * Service drivers are unbound during |
| * tb_xdomain_remove() so setting XDomain as |
| * unplugged here prevents deadlock if they call |
| * tb_xdomain_disable_paths(). We will tear down |
| * the path below. |
| */ |
| xd->is_unplugged = true; |
| tb_xdomain_remove(xd); |
| port->xdomain = NULL; |
| __tb_disconnect_xdomain_paths(tb, xd); |
| tb_xdomain_put(xd); |
| tb_port_unconfigure_xdomain(port); |
| } else if (tb_port_is_dpout(port) || tb_port_is_dpin(port)) { |
| tb_dp_resource_unavailable(tb, port); |
| } else { |
| tb_port_dbg(port, |
| "got unplug event for disconnected port, ignoring\n"); |
| } |
| } else if (port->remote) { |
| tb_port_dbg(port, "got plug event for connected port, ignoring\n"); |
| } else { |
| if (tb_port_is_null(port)) { |
| tb_port_dbg(port, "hotplug: scanning\n"); |
| tb_scan_port(port); |
| if (!port->remote) |
| tb_port_dbg(port, "hotplug: no switch found\n"); |
| } else if (tb_port_is_dpout(port) || tb_port_is_dpin(port)) { |
| tb_dp_resource_available(tb, port); |
| } |
| } |
| |
| pm_runtime_mark_last_busy(&sw->dev); |
| pm_runtime_put_autosuspend(&sw->dev); |
| |
| put_sw: |
| tb_switch_put(sw); |
| out: |
| mutex_unlock(&tb->lock); |
| |
| pm_runtime_mark_last_busy(&tb->dev); |
| pm_runtime_put_autosuspend(&tb->dev); |
| |
| kfree(ev); |
| } |
| |
| /* |
| * tb_schedule_hotplug_handler() - callback function for the control channel |
| * |
| * Delegates to tb_handle_hotplug. |
| */ |
| static void tb_handle_event(struct tb *tb, enum tb_cfg_pkg_type type, |
| const void *buf, size_t size) |
| { |
| const struct cfg_event_pkg *pkg = buf; |
| u64 route; |
| |
| if (type != TB_CFG_PKG_EVENT) { |
| tb_warn(tb, "unexpected event %#x, ignoring\n", type); |
| return; |
| } |
| |
| route = tb_cfg_get_route(&pkg->header); |
| |
| if (tb_cfg_ack_plug(tb->ctl, route, pkg->port, pkg->unplug)) { |
| tb_warn(tb, "could not ack plug event on %llx:%x\n", route, |
| pkg->port); |
| } |
| |
| tb_queue_hotplug(tb, route, pkg->port, pkg->unplug); |
| } |
| |
| static void tb_stop(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_tunnel *tunnel; |
| struct tb_tunnel *n; |
| |
| cancel_delayed_work(&tcm->remove_work); |
| /* tunnels are only present after everything has been initialized */ |
| list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { |
| /* |
| * DMA tunnels require the driver to be functional so we |
| * tear them down. Other protocol tunnels can be left |
| * intact. |
| */ |
| if (tb_tunnel_is_dma(tunnel)) |
| tb_tunnel_deactivate(tunnel); |
| tb_tunnel_free(tunnel); |
| } |
| tb_switch_remove(tb->root_switch); |
| tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ |
| } |
| |
| static int tb_scan_finalize_switch(struct device *dev, void *data) |
| { |
| if (tb_is_switch(dev)) { |
| struct tb_switch *sw = tb_to_switch(dev); |
| |
| /* |
| * If we found that the switch was already setup by the |
| * boot firmware, mark it as authorized now before we |
| * send uevent to userspace. |
| */ |
| if (sw->boot) |
| sw->authorized = 1; |
| |
| dev_set_uevent_suppress(dev, false); |
| kobject_uevent(&dev->kobj, KOBJ_ADD); |
| device_for_each_child(dev, NULL, tb_scan_finalize_switch); |
| } |
| |
| return 0; |
| } |
| |
| static int tb_start(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| int ret; |
| |
| tb->root_switch = tb_switch_alloc(tb, &tb->dev, 0); |
| if (IS_ERR(tb->root_switch)) |
| return PTR_ERR(tb->root_switch); |
| |
| /* |
| * ICM firmware upgrade needs running firmware and in native |
| * mode that is not available so disable firmware upgrade of the |
| * root switch. |
| */ |
| tb->root_switch->no_nvm_upgrade = true; |
| /* All USB4 routers support runtime PM */ |
| tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch); |
| |
| ret = tb_switch_configure(tb->root_switch); |
| if (ret) { |
| tb_switch_put(tb->root_switch); |
| return ret; |
| } |
| |
| /* Announce the switch to the world */ |
| ret = tb_switch_add(tb->root_switch); |
| if (ret) { |
| tb_switch_put(tb->root_switch); |
| return ret; |
| } |
| |
| /* Enable TMU if it is off */ |
| tb_switch_tmu_enable(tb->root_switch); |
| /* Full scan to discover devices added before the driver was loaded. */ |
| tb_scan_switch(tb->root_switch); |
| /* Find out tunnels created by the boot firmware */ |
| tb_discover_tunnels(tb->root_switch); |
| /* |
| * If the boot firmware did not create USB 3.x tunnels create them |
| * now for the whole topology. |
| */ |
| tb_create_usb3_tunnels(tb->root_switch); |
| /* Add DP IN resources for the root switch */ |
| tb_add_dp_resources(tb->root_switch); |
| /* Make the discovered switches available to the userspace */ |
| device_for_each_child(&tb->root_switch->dev, NULL, |
| tb_scan_finalize_switch); |
| |
| /* Allow tb_handle_hotplug to progress events */ |
| tcm->hotplug_active = true; |
| return 0; |
| } |
| |
| static int tb_suspend_noirq(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| |
| tb_dbg(tb, "suspending...\n"); |
| tb_disconnect_and_release_dp(tb); |
| tb_switch_suspend(tb->root_switch, false); |
| tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ |
| tb_dbg(tb, "suspend finished\n"); |
| |
| return 0; |
| } |
| |
| static void tb_restore_children(struct tb_switch *sw) |
| { |
| struct tb_port *port; |
| |
| /* No need to restore if the router is already unplugged */ |
| if (sw->is_unplugged) |
| return; |
| |
| if (tb_enable_tmu(sw)) |
| tb_sw_warn(sw, "failed to restore TMU configuration\n"); |
| |
| tb_switch_for_each_port(sw, port) { |
| if (!tb_port_has_remote(port) && !port->xdomain) |
| continue; |
| |
| if (port->remote) { |
| tb_switch_lane_bonding_enable(port->remote->sw); |
| tb_switch_configure_link(port->remote->sw); |
| |
| tb_restore_children(port->remote->sw); |
| } else if (port->xdomain) { |
| tb_port_configure_xdomain(port); |
| } |
| } |
| } |
| |
| static int tb_resume_noirq(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_tunnel *tunnel, *n; |
| |
| tb_dbg(tb, "resuming...\n"); |
| |
| /* remove any pci devices the firmware might have setup */ |
| tb_switch_reset(tb->root_switch); |
| |
| tb_switch_resume(tb->root_switch); |
| tb_free_invalid_tunnels(tb); |
| tb_free_unplugged_children(tb->root_switch); |
| tb_restore_children(tb->root_switch); |
| list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) |
| tb_tunnel_restart(tunnel); |
| if (!list_empty(&tcm->tunnel_list)) { |
| /* |
| * the pcie links need some time to get going. |
| * 100ms works for me... |
| */ |
| tb_dbg(tb, "tunnels restarted, sleeping for 100ms\n"); |
| msleep(100); |
| } |
| /* Allow tb_handle_hotplug to progress events */ |
| tcm->hotplug_active = true; |
| tb_dbg(tb, "resume finished\n"); |
| |
| return 0; |
| } |
| |
| static int tb_free_unplugged_xdomains(struct tb_switch *sw) |
| { |
| struct tb_port *port; |
| int ret = 0; |
| |
| tb_switch_for_each_port(sw, port) { |
| if (tb_is_upstream_port(port)) |
| continue; |
| if (port->xdomain && port->xdomain->is_unplugged) { |
| tb_retimer_remove_all(port); |
| tb_xdomain_remove(port->xdomain); |
| tb_port_unconfigure_xdomain(port); |
| port->xdomain = NULL; |
| ret++; |
| } else if (port->remote) { |
| ret += tb_free_unplugged_xdomains(port->remote->sw); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int tb_freeze_noirq(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| |
| tcm->hotplug_active = false; |
| return 0; |
| } |
| |
| static int tb_thaw_noirq(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| |
| tcm->hotplug_active = true; |
| return 0; |
| } |
| |
| static void tb_complete(struct tb *tb) |
| { |
| /* |
| * Release any unplugged XDomains and if there is a case where |
| * another domain is swapped in place of unplugged XDomain we |
| * need to run another rescan. |
| */ |
| mutex_lock(&tb->lock); |
| if (tb_free_unplugged_xdomains(tb->root_switch)) |
| tb_scan_switch(tb->root_switch); |
| mutex_unlock(&tb->lock); |
| } |
| |
| static int tb_runtime_suspend(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| |
| mutex_lock(&tb->lock); |
| tb_switch_suspend(tb->root_switch, true); |
| tcm->hotplug_active = false; |
| mutex_unlock(&tb->lock); |
| |
| return 0; |
| } |
| |
| static void tb_remove_work(struct work_struct *work) |
| { |
| struct tb_cm *tcm = container_of(work, struct tb_cm, remove_work.work); |
| struct tb *tb = tcm_to_tb(tcm); |
| |
| mutex_lock(&tb->lock); |
| if (tb->root_switch) { |
| tb_free_unplugged_children(tb->root_switch); |
| tb_free_unplugged_xdomains(tb->root_switch); |
| } |
| mutex_unlock(&tb->lock); |
| } |
| |
| static int tb_runtime_resume(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_tunnel *tunnel, *n; |
| |
| mutex_lock(&tb->lock); |
| tb_switch_resume(tb->root_switch); |
| tb_free_invalid_tunnels(tb); |
| tb_restore_children(tb->root_switch); |
| list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) |
| tb_tunnel_restart(tunnel); |
| tcm->hotplug_active = true; |
| mutex_unlock(&tb->lock); |
| |
| /* |
| * Schedule cleanup of any unplugged devices. Run this in a |
| * separate thread to avoid possible deadlock if the device |
| * removal runtime resumes the unplugged device. |
| */ |
| queue_delayed_work(tb->wq, &tcm->remove_work, msecs_to_jiffies(50)); |
| return 0; |
| } |
| |
| static const struct tb_cm_ops tb_cm_ops = { |
| .start = tb_start, |
| .stop = tb_stop, |
| .suspend_noirq = tb_suspend_noirq, |
| .resume_noirq = tb_resume_noirq, |
| .freeze_noirq = tb_freeze_noirq, |
| .thaw_noirq = tb_thaw_noirq, |
| .complete = tb_complete, |
| .runtime_suspend = tb_runtime_suspend, |
| .runtime_resume = tb_runtime_resume, |
| .handle_event = tb_handle_event, |
| .disapprove_switch = tb_disconnect_pci, |
| .approve_switch = tb_tunnel_pci, |
| .approve_xdomain_paths = tb_approve_xdomain_paths, |
| .disconnect_xdomain_paths = tb_disconnect_xdomain_paths, |
| }; |
| |
| struct tb *tb_probe(struct tb_nhi *nhi) |
| { |
| struct tb_cm *tcm; |
| struct tb *tb; |
| |
| tb = tb_domain_alloc(nhi, sizeof(*tcm)); |
| if (!tb) |
| return NULL; |
| |
| if (tb_acpi_may_tunnel_pcie()) |
| tb->security_level = TB_SECURITY_USER; |
| else |
| tb->security_level = TB_SECURITY_NOPCIE; |
| |
| tb->cm_ops = &tb_cm_ops; |
| |
| tcm = tb_priv(tb); |
| INIT_LIST_HEAD(&tcm->tunnel_list); |
| INIT_LIST_HEAD(&tcm->dp_resources); |
| INIT_DELAYED_WORK(&tcm->remove_work, tb_remove_work); |
| |
| tb_dbg(tb, "using software connection manager\n"); |
| |
| return tb; |
| } |