| // SPDX-License-Identifier: GPL-2.0+ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| |
| #define RTMV20_REG_DEVINFO 0x00 |
| #define RTMV20_REG_PULSEDELAY 0x01 |
| #define RTMV20_REG_PULSEWIDTH 0x03 |
| #define RTMV20_REG_LDCTRL1 0x05 |
| #define RTMV20_REG_ESPULSEWIDTH 0x06 |
| #define RTMV20_REG_ESLDCTRL1 0x08 |
| #define RTMV20_REG_LBP 0x0A |
| #define RTMV20_REG_LDCTRL2 0x0B |
| #define RTMV20_REG_FSIN1CTRL1 0x0D |
| #define RTMV20_REG_FSIN1CTRL3 0x0F |
| #define RTMV20_REG_FSIN2CTRL1 0x10 |
| #define RTMV20_REG_FSIN2CTRL3 0x12 |
| #define RTMV20_REG_ENCTRL 0x13 |
| #define RTMV20_REG_STRBVSYNDLYL 0x29 |
| #define RTMV20_REG_LDIRQ 0x30 |
| #define RTMV20_REG_LDSTAT 0x40 |
| #define RTMV20_REG_LDMASK 0x50 |
| #define RTMV20_MAX_REGS (RTMV20_REG_LDMASK + 1) |
| |
| #define RTMV20_VID_MASK GENMASK(7, 4) |
| #define RICHTEK_VID 0x80 |
| #define RTMV20_LDCURR_MASK GENMASK(7, 0) |
| #define RTMV20_DELAY_MASK GENMASK(9, 0) |
| #define RTMV20_WIDTH_MASK GENMASK(13, 0) |
| #define RTMV20_WIDTH2_MASK GENMASK(7, 0) |
| #define RTMV20_LBPLVL_MASK GENMASK(3, 0) |
| #define RTMV20_LBPEN_MASK BIT(7) |
| #define RTMV20_STROBEPOL_MASK BIT(1) |
| #define RTMV20_VSYNPOL_MASK BIT(1) |
| #define RTMV20_FSINEN_MASK BIT(7) |
| #define RTMV20_ESEN_MASK BIT(6) |
| #define RTMV20_FSINOUT_MASK BIT(2) |
| #define LDENABLE_MASK (BIT(3) | BIT(0)) |
| |
| #define OTPEVT_MASK BIT(4) |
| #define SHORTEVT_MASK BIT(3) |
| #define OPENEVT_MASK BIT(2) |
| #define LBPEVT_MASK BIT(1) |
| #define OCPEVT_MASK BIT(0) |
| #define FAILEVT_MASK (SHORTEVT_MASK | OPENEVT_MASK | LBPEVT_MASK) |
| |
| #define RTMV20_LSW_MINUA 0 |
| #define RTMV20_LSW_MAXUA 6000000 |
| #define RTMV20_LSW_STEPUA 30000 |
| |
| #define RTMV20_LSW_DEFAULTUA 3000000 |
| |
| #define RTMV20_I2CRDY_TIMEUS 200 |
| #define RTMV20_CSRDY_TIMEUS 2000 |
| |
| struct rtmv20_priv { |
| struct device *dev; |
| struct regmap *regmap; |
| struct gpio_desc *enable_gpio; |
| struct regulator_dev *rdev; |
| }; |
| |
| static int rtmv20_lsw_enable(struct regulator_dev *rdev) |
| { |
| struct rtmv20_priv *priv = rdev_get_drvdata(rdev); |
| int ret; |
| |
| gpiod_set_value(priv->enable_gpio, 1); |
| |
| /* Wait for I2C can be accessed */ |
| usleep_range(RTMV20_I2CRDY_TIMEUS, RTMV20_I2CRDY_TIMEUS + 100); |
| |
| /* HW re-enable, disable cache only and sync regcache here */ |
| regcache_cache_only(priv->regmap, false); |
| ret = regcache_sync(priv->regmap); |
| if (ret) |
| return ret; |
| |
| return regulator_enable_regmap(rdev); |
| } |
| |
| static int rtmv20_lsw_disable(struct regulator_dev *rdev) |
| { |
| struct rtmv20_priv *priv = rdev_get_drvdata(rdev); |
| int ret; |
| |
| ret = regulator_disable_regmap(rdev); |
| if (ret) |
| return ret; |
| |
| /* Mark the regcache as dirty and cache only before HW disabled */ |
| regcache_cache_only(priv->regmap, true); |
| regcache_mark_dirty(priv->regmap); |
| |
| gpiod_set_value(priv->enable_gpio, 0); |
| |
| return 0; |
| } |
| |
| static int rtmv20_lsw_set_current_limit(struct regulator_dev *rdev, int min_uA, |
| int max_uA) |
| { |
| int sel; |
| |
| if (min_uA > RTMV20_LSW_MAXUA || max_uA < RTMV20_LSW_MINUA) |
| return -EINVAL; |
| |
| if (max_uA > RTMV20_LSW_MAXUA) |
| max_uA = RTMV20_LSW_MAXUA; |
| |
| sel = (max_uA - RTMV20_LSW_MINUA) / RTMV20_LSW_STEPUA; |
| |
| /* Ensure the selected setting is still in range */ |
| if ((sel * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA) < min_uA) |
| return -EINVAL; |
| |
| sel <<= ffs(rdev->desc->csel_mask) - 1; |
| |
| return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg, |
| rdev->desc->csel_mask, sel); |
| } |
| |
| static int rtmv20_lsw_get_current_limit(struct regulator_dev *rdev) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val); |
| if (ret) |
| return ret; |
| |
| val &= rdev->desc->csel_mask; |
| val >>= ffs(rdev->desc->csel_mask) - 1; |
| |
| return val * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA; |
| } |
| |
| static const struct regulator_ops rtmv20_regulator_ops = { |
| .set_current_limit = rtmv20_lsw_set_current_limit, |
| .get_current_limit = rtmv20_lsw_get_current_limit, |
| .enable = rtmv20_lsw_enable, |
| .disable = rtmv20_lsw_disable, |
| .is_enabled = regulator_is_enabled_regmap, |
| }; |
| |
| static const struct regulator_desc rtmv20_lsw_desc = { |
| .name = "rtmv20,lsw", |
| .of_match = of_match_ptr("lsw"), |
| .type = REGULATOR_CURRENT, |
| .owner = THIS_MODULE, |
| .ops = &rtmv20_regulator_ops, |
| .csel_reg = RTMV20_REG_LDCTRL1, |
| .csel_mask = RTMV20_LDCURR_MASK, |
| .enable_reg = RTMV20_REG_ENCTRL, |
| .enable_mask = LDENABLE_MASK, |
| .enable_time = RTMV20_CSRDY_TIMEUS, |
| }; |
| |
| static irqreturn_t rtmv20_irq_handler(int irq, void *data) |
| { |
| struct rtmv20_priv *priv = data; |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(priv->regmap, RTMV20_REG_LDIRQ, &val); |
| if (ret) { |
| dev_err(priv->dev, "Failed to get irq flags\n"); |
| return IRQ_NONE; |
| } |
| |
| if (val & OTPEVT_MASK) |
| regulator_notifier_call_chain(priv->rdev, REGULATOR_EVENT_OVER_TEMP, NULL); |
| |
| if (val & OCPEVT_MASK) |
| regulator_notifier_call_chain(priv->rdev, REGULATOR_EVENT_OVER_CURRENT, NULL); |
| |
| if (val & FAILEVT_MASK) |
| regulator_notifier_call_chain(priv->rdev, REGULATOR_EVENT_FAIL, NULL); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static u32 clamp_to_selector(u32 val, u32 min, u32 max, u32 step) |
| { |
| u32 retval = clamp_val(val, min, max); |
| |
| return (retval - min) / step; |
| } |
| |
| static int rtmv20_properties_init(struct rtmv20_priv *priv) |
| { |
| const struct { |
| const char *name; |
| u32 def; |
| u32 min; |
| u32 max; |
| u32 step; |
| u32 addr; |
| u32 mask; |
| } props[] = { |
| { "richtek,ld-pulse-delay-us", 0, 0, 100000, 100, RTMV20_REG_PULSEDELAY, |
| RTMV20_DELAY_MASK }, |
| { "richtek,ld-pulse-width-us", 1200, 0, 10000, 1, RTMV20_REG_PULSEWIDTH, |
| RTMV20_WIDTH_MASK }, |
| { "richtek,fsin1-delay-us", 23000, 0, 100000, 100, RTMV20_REG_FSIN1CTRL1, |
| RTMV20_DELAY_MASK }, |
| { "richtek,fsin1-width-us", 160, 40, 10000, 40, RTMV20_REG_FSIN1CTRL3, |
| RTMV20_WIDTH2_MASK }, |
| { "richtek,fsin2-delay-us", 23000, 0, 100000, 100, RTMV20_REG_FSIN2CTRL1, |
| RTMV20_DELAY_MASK }, |
| { "richtek,fsin2-width-us", 160, 40, 10000, 40, RTMV20_REG_FSIN2CTRL3, |
| RTMV20_WIDTH2_MASK }, |
| { "richtek,es-pulse-width-us", 1200, 0, 10000, 1, RTMV20_REG_ESPULSEWIDTH, |
| RTMV20_WIDTH_MASK }, |
| { "richtek,es-ld-current-microamp", 3000000, 0, 6000000, 30000, |
| RTMV20_REG_ESLDCTRL1, RTMV20_LDCURR_MASK }, |
| { "richtek,lbp-level-microvolt", 2700000, 2400000, 3700000, 100000, RTMV20_REG_LBP, |
| RTMV20_LBPLVL_MASK }, |
| { "richtek,lbp-enable", 0, 0, 1, 1, RTMV20_REG_LBP, RTMV20_LBPEN_MASK }, |
| { "richtek,strobe-polarity-high", 1, 0, 1, 1, RTMV20_REG_LDCTRL2, |
| RTMV20_STROBEPOL_MASK }, |
| { "richtek,vsync-polarity-high", 1, 0, 1, 1, RTMV20_REG_LDCTRL2, |
| RTMV20_VSYNPOL_MASK }, |
| { "richtek,fsin-enable", 0, 0, 1, 1, RTMV20_REG_ENCTRL, RTMV20_FSINEN_MASK }, |
| { "richtek,fsin-output", 0, 0, 1, 1, RTMV20_REG_ENCTRL, RTMV20_FSINOUT_MASK }, |
| { "richtek,es-enable", 0, 0, 1, 1, RTMV20_REG_ENCTRL, RTMV20_ESEN_MASK }, |
| }; |
| int i, ret; |
| |
| for (i = 0; i < ARRAY_SIZE(props); i++) { |
| __be16 bval16; |
| u16 val16; |
| u32 temp; |
| int significant_bit = fls(props[i].mask); |
| int shift = ffs(props[i].mask) - 1; |
| |
| if (props[i].max > 1) { |
| ret = device_property_read_u32(priv->dev, props[i].name, &temp); |
| if (ret) |
| temp = props[i].def; |
| } else |
| temp = device_property_read_bool(priv->dev, props[i].name); |
| |
| temp = clamp_to_selector(temp, props[i].min, props[i].max, props[i].step); |
| |
| /* If significant bit is over 8, two byte access, others one */ |
| if (significant_bit > 8) { |
| ret = regmap_raw_read(priv->regmap, props[i].addr, &bval16, sizeof(bval16)); |
| if (ret) |
| return ret; |
| |
| val16 = be16_to_cpu(bval16); |
| val16 &= ~props[i].mask; |
| val16 |= (temp << shift); |
| bval16 = cpu_to_be16(val16); |
| |
| ret = regmap_raw_write(priv->regmap, props[i].addr, &bval16, |
| sizeof(bval16)); |
| } else { |
| ret = regmap_update_bits(priv->regmap, props[i].addr, props[i].mask, |
| temp << shift); |
| } |
| |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rtmv20_check_chip_exist(struct rtmv20_priv *priv) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(priv->regmap, RTMV20_REG_DEVINFO, &val); |
| if (ret) |
| return ret; |
| |
| if ((val & RTMV20_VID_MASK) != RICHTEK_VID) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static bool rtmv20_is_accessible_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case RTMV20_REG_DEVINFO ... RTMV20_REG_STRBVSYNDLYL: |
| case RTMV20_REG_LDIRQ: |
| case RTMV20_REG_LDSTAT: |
| case RTMV20_REG_LDMASK: |
| return true; |
| } |
| return false; |
| } |
| |
| static bool rtmv20_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| if (reg == RTMV20_REG_LDIRQ || reg == RTMV20_REG_LDSTAT) |
| return true; |
| return false; |
| } |
| |
| static const struct regmap_config rtmv20_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .cache_type = REGCACHE_RBTREE, |
| .max_register = RTMV20_REG_LDMASK, |
| .num_reg_defaults_raw = RTMV20_MAX_REGS, |
| |
| .writeable_reg = rtmv20_is_accessible_reg, |
| .readable_reg = rtmv20_is_accessible_reg, |
| .volatile_reg = rtmv20_is_volatile_reg, |
| }; |
| |
| static int rtmv20_probe(struct i2c_client *i2c) |
| { |
| struct rtmv20_priv *priv; |
| struct regulator_config config = {}; |
| int ret; |
| |
| priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->dev = &i2c->dev; |
| |
| /* Before regmap register, configure HW enable to make I2C accessible */ |
| priv->enable_gpio = devm_gpiod_get(&i2c->dev, "enable", GPIOD_OUT_HIGH); |
| if (IS_ERR(priv->enable_gpio)) { |
| dev_err(&i2c->dev, "Failed to get enable gpio\n"); |
| return PTR_ERR(priv->enable_gpio); |
| } |
| |
| /* Wait for I2C can be accessed */ |
| usleep_range(RTMV20_I2CRDY_TIMEUS, RTMV20_I2CRDY_TIMEUS + 100); |
| |
| priv->regmap = devm_regmap_init_i2c(i2c, &rtmv20_regmap_config); |
| if (IS_ERR(priv->regmap)) { |
| dev_err(&i2c->dev, "Failed to allocate register map\n"); |
| return PTR_ERR(priv->regmap); |
| } |
| |
| ret = rtmv20_check_chip_exist(priv); |
| if (ret) { |
| dev_err(&i2c->dev, "Chip vendor info is not matched\n"); |
| return ret; |
| } |
| |
| ret = rtmv20_properties_init(priv); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to init properties\n"); |
| return ret; |
| } |
| |
| /* |
| * keep in shutdown mode to minimize the current consumption |
| * and also mark regcache as dirty |
| */ |
| regcache_cache_only(priv->regmap, true); |
| regcache_mark_dirty(priv->regmap); |
| gpiod_set_value(priv->enable_gpio, 0); |
| |
| config.dev = &i2c->dev; |
| config.regmap = priv->regmap; |
| config.driver_data = priv; |
| priv->rdev = devm_regulator_register(&i2c->dev, &rtmv20_lsw_desc, &config); |
| if (IS_ERR(priv->rdev)) { |
| dev_err(&i2c->dev, "Failed to register regulator\n"); |
| return PTR_ERR(priv->rdev); |
| } |
| |
| /* Unmask all events before IRQ registered */ |
| ret = regmap_write(priv->regmap, RTMV20_REG_LDMASK, 0); |
| if (ret) |
| return ret; |
| |
| return devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, rtmv20_irq_handler, |
| IRQF_ONESHOT, dev_name(&i2c->dev), priv); |
| } |
| |
| static int __maybe_unused rtmv20_suspend(struct device *dev) |
| { |
| struct i2c_client *i2c = to_i2c_client(dev); |
| |
| /* |
| * When system suspend, disable irq to prevent interrupt trigger |
| * during I2C bus suspend |
| */ |
| disable_irq(i2c->irq); |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(i2c->irq); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused rtmv20_resume(struct device *dev) |
| { |
| struct i2c_client *i2c = to_i2c_client(dev); |
| |
| /* Enable irq after I2C bus already resume */ |
| enable_irq(i2c->irq); |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(i2c->irq); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(rtmv20_pm, rtmv20_suspend, rtmv20_resume); |
| |
| static const struct of_device_id __maybe_unused rtmv20_of_id[] = { |
| { .compatible = "richtek,rtmv20", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, rtmv20_of_id); |
| |
| static struct i2c_driver rtmv20_driver = { |
| .driver = { |
| .name = "rtmv20", |
| .of_match_table = of_match_ptr(rtmv20_of_id), |
| .pm = &rtmv20_pm, |
| }, |
| .probe_new = rtmv20_probe, |
| }; |
| module_i2c_driver(rtmv20_driver); |
| |
| MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); |
| MODULE_DESCRIPTION("Richtek RTMV20 Regulator Driver"); |
| MODULE_LICENSE("GPL v2"); |