| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) ST-Ericsson SA 2012 |
| * |
| * Author: Ola Lilja <ola.o.lilja@stericsson.com>, |
| * Kristoffer Karlsson <kristoffer.karlsson@stericsson.com> |
| * for ST-Ericsson. |
| * |
| * License terms: |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/mutex.h> |
| |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| |
| #include "ux500_pcm.h" |
| #include "ux500_msp_dai.h" |
| #include "mop500_ab8500.h" |
| #include "../codecs/ab8500-codec.h" |
| |
| #define TX_SLOT_MONO 0x0008 |
| #define TX_SLOT_STEREO 0x000a |
| #define RX_SLOT_MONO 0x0001 |
| #define RX_SLOT_STEREO 0x0003 |
| #define TX_SLOT_8CH 0x00FF |
| #define RX_SLOT_8CH 0x00FF |
| |
| #define DEF_TX_SLOTS TX_SLOT_STEREO |
| #define DEF_RX_SLOTS RX_SLOT_MONO |
| |
| #define DRIVERMODE_NORMAL 0 |
| #define DRIVERMODE_CODEC_ONLY 1 |
| |
| /* Slot configuration */ |
| static unsigned int tx_slots = DEF_TX_SLOTS; |
| static unsigned int rx_slots = DEF_RX_SLOTS; |
| |
| /* Configuration consistency parameters */ |
| static DEFINE_MUTEX(mop500_ab8500_params_lock); |
| static unsigned long mop500_ab8500_usage; |
| static int mop500_ab8500_rate; |
| static int mop500_ab8500_channels; |
| |
| /* Clocks */ |
| static const char * const enum_mclk[] = { |
| "SYSCLK", |
| "ULPCLK" |
| }; |
| enum mclk { |
| MCLK_SYSCLK, |
| MCLK_ULPCLK, |
| }; |
| |
| static SOC_ENUM_SINGLE_EXT_DECL(soc_enum_mclk, enum_mclk); |
| |
| /* Private data for machine-part MOP500<->AB8500 */ |
| struct mop500_ab8500_drvdata { |
| /* Clocks */ |
| enum mclk mclk_sel; |
| struct clk *clk_ptr_intclk; |
| struct clk *clk_ptr_sysclk; |
| struct clk *clk_ptr_ulpclk; |
| }; |
| |
| static inline const char *get_mclk_str(enum mclk mclk_sel) |
| { |
| switch (mclk_sel) { |
| case MCLK_SYSCLK: |
| return "SYSCLK"; |
| case MCLK_ULPCLK: |
| return "ULPCLK"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static int mop500_ab8500_set_mclk(struct device *dev, |
| struct mop500_ab8500_drvdata *drvdata) |
| { |
| int status; |
| struct clk *clk_ptr; |
| |
| if (IS_ERR(drvdata->clk_ptr_intclk)) { |
| dev_err(dev, |
| "%s: ERROR: intclk not initialized!\n", __func__); |
| return -EIO; |
| } |
| |
| switch (drvdata->mclk_sel) { |
| case MCLK_SYSCLK: |
| clk_ptr = drvdata->clk_ptr_sysclk; |
| break; |
| case MCLK_ULPCLK: |
| clk_ptr = drvdata->clk_ptr_ulpclk; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (IS_ERR(clk_ptr)) { |
| dev_err(dev, "%s: ERROR: %s not initialized!\n", __func__, |
| get_mclk_str(drvdata->mclk_sel)); |
| return -EIO; |
| } |
| |
| status = clk_set_parent(drvdata->clk_ptr_intclk, clk_ptr); |
| if (status) |
| dev_err(dev, |
| "%s: ERROR: Setting intclk parent to %s failed (ret = %d)!", |
| __func__, get_mclk_str(drvdata->mclk_sel), status); |
| else |
| dev_dbg(dev, |
| "%s: intclk parent changed to %s.\n", |
| __func__, get_mclk_str(drvdata->mclk_sel)); |
| |
| return status; |
| } |
| |
| /* |
| * Control-events |
| */ |
| |
| static int mclk_input_control_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); |
| struct mop500_ab8500_drvdata *drvdata = |
| snd_soc_card_get_drvdata(card); |
| |
| ucontrol->value.enumerated.item[0] = drvdata->mclk_sel; |
| |
| return 0; |
| } |
| |
| static int mclk_input_control_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); |
| struct mop500_ab8500_drvdata *drvdata = |
| snd_soc_card_get_drvdata(card); |
| unsigned int val = ucontrol->value.enumerated.item[0]; |
| |
| if (val > (unsigned int)MCLK_ULPCLK) |
| return -EINVAL; |
| if (drvdata->mclk_sel == val) |
| return 0; |
| |
| drvdata->mclk_sel = val; |
| |
| return 1; |
| } |
| |
| /* |
| * Controls |
| */ |
| |
| static struct snd_kcontrol_new mop500_ab8500_ctrls[] = { |
| SOC_ENUM_EXT("Master Clock Select", |
| soc_enum_mclk, |
| mclk_input_control_get, mclk_input_control_put), |
| SOC_DAPM_PIN_SWITCH("Headset Left"), |
| SOC_DAPM_PIN_SWITCH("Headset Right"), |
| SOC_DAPM_PIN_SWITCH("Earpiece"), |
| SOC_DAPM_PIN_SWITCH("Speaker Left"), |
| SOC_DAPM_PIN_SWITCH("Speaker Right"), |
| SOC_DAPM_PIN_SWITCH("LineOut Left"), |
| SOC_DAPM_PIN_SWITCH("LineOut Right"), |
| SOC_DAPM_PIN_SWITCH("Vibra 1"), |
| SOC_DAPM_PIN_SWITCH("Vibra 2"), |
| SOC_DAPM_PIN_SWITCH("Mic 1"), |
| SOC_DAPM_PIN_SWITCH("Mic 2"), |
| SOC_DAPM_PIN_SWITCH("LineIn Left"), |
| SOC_DAPM_PIN_SWITCH("LineIn Right"), |
| SOC_DAPM_PIN_SWITCH("DMic 1"), |
| SOC_DAPM_PIN_SWITCH("DMic 2"), |
| SOC_DAPM_PIN_SWITCH("DMic 3"), |
| SOC_DAPM_PIN_SWITCH("DMic 4"), |
| SOC_DAPM_PIN_SWITCH("DMic 5"), |
| SOC_DAPM_PIN_SWITCH("DMic 6"), |
| }; |
| |
| /* ASoC */ |
| |
| static int mop500_ab8500_startup(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| |
| /* Set audio-clock source */ |
| return mop500_ab8500_set_mclk(rtd->card->dev, |
| snd_soc_card_get_drvdata(rtd->card)); |
| } |
| |
| static void mop500_ab8500_shutdown(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct device *dev = rtd->card->dev; |
| |
| dev_dbg(dev, "%s: Enter\n", __func__); |
| |
| /* Reset slots configuration to default(s) */ |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| tx_slots = DEF_TX_SLOTS; |
| else |
| rx_slots = DEF_RX_SLOTS; |
| } |
| |
| static int mop500_ab8500_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); |
| struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); |
| struct device *dev = rtd->card->dev; |
| unsigned int fmt; |
| int channels, ret = 0, driver_mode, slots; |
| unsigned int sw_codec, sw_cpu; |
| bool is_playback; |
| |
| dev_dbg(dev, "%s: Enter\n", __func__); |
| |
| dev_dbg(dev, "%s: substream->pcm->name = %s\n" |
| "substream->pcm->id = %s.\n" |
| "substream->name = %s.\n" |
| "substream->number = %d.\n", |
| __func__, |
| substream->pcm->name, |
| substream->pcm->id, |
| substream->name, |
| substream->number); |
| |
| /* Ensure configuration consistency between DAIs */ |
| mutex_lock(&mop500_ab8500_params_lock); |
| if (mop500_ab8500_usage) { |
| if (mop500_ab8500_rate != params_rate(params) || |
| mop500_ab8500_channels != params_channels(params)) { |
| mutex_unlock(&mop500_ab8500_params_lock); |
| return -EBUSY; |
| } |
| } else { |
| mop500_ab8500_rate = params_rate(params); |
| mop500_ab8500_channels = params_channels(params); |
| } |
| __set_bit(cpu_dai->id, &mop500_ab8500_usage); |
| mutex_unlock(&mop500_ab8500_params_lock); |
| |
| channels = params_channels(params); |
| |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S32_LE: |
| sw_cpu = 32; |
| break; |
| |
| case SNDRV_PCM_FORMAT_S16_LE: |
| sw_cpu = 16; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| /* Setup codec depending on driver-mode */ |
| if (channels == 8) |
| driver_mode = DRIVERMODE_CODEC_ONLY; |
| else |
| driver_mode = DRIVERMODE_NORMAL; |
| dev_dbg(dev, "%s: Driver-mode: %s.\n", __func__, |
| (driver_mode == DRIVERMODE_NORMAL) ? "NORMAL" : "CODEC_ONLY"); |
| |
| /* Setup format */ |
| |
| if (driver_mode == DRIVERMODE_NORMAL) { |
| fmt = SND_SOC_DAIFMT_DSP_A | |
| SND_SOC_DAIFMT_CBM_CFM | |
| SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CONT; |
| } else { |
| fmt = SND_SOC_DAIFMT_DSP_A | |
| SND_SOC_DAIFMT_CBM_CFM | |
| SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_GATED; |
| } |
| |
| ret = snd_soc_runtime_set_dai_fmt(rtd, fmt); |
| if (ret) |
| return ret; |
| |
| /* Setup TDM-slots */ |
| |
| is_playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); |
| switch (channels) { |
| case 1: |
| slots = 16; |
| tx_slots = (is_playback) ? TX_SLOT_MONO : 0; |
| rx_slots = (is_playback) ? 0 : RX_SLOT_MONO; |
| break; |
| case 2: |
| slots = 16; |
| tx_slots = (is_playback) ? TX_SLOT_STEREO : 0; |
| rx_slots = (is_playback) ? 0 : RX_SLOT_STEREO; |
| break; |
| case 8: |
| slots = 16; |
| tx_slots = (is_playback) ? TX_SLOT_8CH : 0; |
| rx_slots = (is_playback) ? 0 : RX_SLOT_8CH; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (driver_mode == DRIVERMODE_NORMAL) |
| sw_codec = sw_cpu; |
| else |
| sw_codec = 20; |
| |
| dev_dbg(dev, "%s: CPU-DAI TDM: TX=0x%04X RX=0x%04x\n", __func__, |
| tx_slots, rx_slots); |
| ret = snd_soc_dai_set_tdm_slot(cpu_dai, tx_slots, rx_slots, slots, |
| sw_cpu); |
| if (ret) |
| return ret; |
| |
| dev_dbg(dev, "%s: CODEC-DAI TDM: TX=0x%04X RX=0x%04x\n", __func__, |
| tx_slots, rx_slots); |
| ret = snd_soc_dai_set_tdm_slot(codec_dai, tx_slots, rx_slots, slots, |
| sw_codec); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int mop500_ab8500_hw_free(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); |
| |
| mutex_lock(&mop500_ab8500_params_lock); |
| __clear_bit(cpu_dai->id, &mop500_ab8500_usage); |
| mutex_unlock(&mop500_ab8500_params_lock); |
| |
| return 0; |
| } |
| |
| const struct snd_soc_ops mop500_ab8500_ops[] = { |
| { |
| .hw_params = mop500_ab8500_hw_params, |
| .hw_free = mop500_ab8500_hw_free, |
| .startup = mop500_ab8500_startup, |
| .shutdown = mop500_ab8500_shutdown, |
| } |
| }; |
| |
| int mop500_ab8500_machine_init(struct snd_soc_pcm_runtime *rtd) |
| { |
| struct snd_soc_dapm_context *dapm = &rtd->card->dapm; |
| struct device *dev = rtd->card->dev; |
| struct mop500_ab8500_drvdata *drvdata; |
| int ret; |
| |
| dev_dbg(dev, "%s Enter.\n", __func__); |
| |
| /* Create driver private-data struct */ |
| drvdata = devm_kzalloc(dev, sizeof(struct mop500_ab8500_drvdata), |
| GFP_KERNEL); |
| |
| if (!drvdata) |
| return -ENOMEM; |
| |
| snd_soc_card_set_drvdata(rtd->card, drvdata); |
| |
| /* Setup clocks */ |
| |
| drvdata->clk_ptr_sysclk = clk_get(dev, "sysclk"); |
| if (IS_ERR(drvdata->clk_ptr_sysclk)) |
| dev_warn(dev, "%s: WARNING: clk_get failed for 'sysclk'!\n", |
| __func__); |
| drvdata->clk_ptr_ulpclk = clk_get(dev, "ulpclk"); |
| if (IS_ERR(drvdata->clk_ptr_ulpclk)) |
| dev_warn(dev, "%s: WARNING: clk_get failed for 'ulpclk'!\n", |
| __func__); |
| drvdata->clk_ptr_intclk = clk_get(dev, "intclk"); |
| if (IS_ERR(drvdata->clk_ptr_intclk)) |
| dev_warn(dev, "%s: WARNING: clk_get failed for 'intclk'!\n", |
| __func__); |
| |
| /* Set intclk default parent to ulpclk */ |
| drvdata->mclk_sel = MCLK_ULPCLK; |
| ret = mop500_ab8500_set_mclk(dev, drvdata); |
| if (ret < 0) |
| dev_warn(dev, "%s: WARNING: mop500_ab8500_set_mclk!\n", |
| __func__); |
| |
| drvdata->mclk_sel = MCLK_ULPCLK; |
| |
| /* Add controls */ |
| ret = snd_soc_add_card_controls(rtd->card, mop500_ab8500_ctrls, |
| ARRAY_SIZE(mop500_ab8500_ctrls)); |
| if (ret < 0) { |
| pr_err("%s: Failed to add machine-controls (%d)!\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = snd_soc_dapm_disable_pin(dapm, "Earpiece"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "Speaker Left"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "Speaker Right"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "LineOut Left"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "LineOut Right"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "Vibra 1"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "Vibra 2"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "Mic 1"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "Mic 2"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "LineIn Left"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "LineIn Right"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "DMic 1"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "DMic 2"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "DMic 3"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "DMic 4"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "DMic 5"); |
| ret |= snd_soc_dapm_disable_pin(dapm, "DMic 6"); |
| |
| return ret; |
| } |
| |
| void mop500_ab8500_remove(struct snd_soc_card *card) |
| { |
| struct mop500_ab8500_drvdata *drvdata = snd_soc_card_get_drvdata(card); |
| |
| clk_put(drvdata->clk_ptr_sysclk); |
| clk_put(drvdata->clk_ptr_ulpclk); |
| clk_put(drvdata->clk_ptr_intclk); |
| |
| snd_soc_card_set_drvdata(card, drvdata); |
| } |