| * Freescale MSI interrupt controller |
| |
| Reguired properities: |
| - compatible : compatible list, contains 2 entries, |
| first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, |
| etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on |
| the parent type. |
| - reg : should contain the address and the length of the shared message |
| interrupt register set. |
| - msi-available-ranges: use <start count> style section to define which |
| msi interrupt can be used in the 256 msi interrupts. This property is |
| optional, without this, all the 256 MSI interrupts can be used. |
| - interrupts : each one of the interrupts here is one entry per 32 MSIs, |
| and routed to the host interrupt controller. the interrupts should |
| be set as edge sensitive. |
| - interrupt-parent: the phandle for the interrupt controller |
| that services interrupts for this device. for 83xx cpu, the interrupts |
| are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed |
| to MPIC. |
| |
| Example: |
| msi@41600 { |
| compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; |
| reg = <0x41600 0x80>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 |
| 0xe1 0 |
| 0xe2 0 |
| 0xe3 0 |
| 0xe4 0 |
| 0xe5 0 |
| 0xe6 0 |
| 0xe7 0>; |
| interrupt-parent = <&mpic>; |
| }; |
