| /* |
| * This file contains work-arounds for x86 and x86_64 platform bugs. |
| */ |
| #include <linux/pci.h> |
| #include <linux/irq.h> |
| |
| #include <asm/hpet.h> |
| |
| #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI) |
| |
| static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) |
| { |
| u8 config, rev; |
| u16 word; |
| |
| /* BIOS may enable hardware IRQ balancing for |
| * E7520/E7320/E7525(revision ID 0x9 and below) |
| * based platforms. |
| * Disable SW irqbalance/affinity on those platforms. |
| */ |
| pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev); |
| if (rev > 0x9) |
| return; |
| |
| /* enable access to config space*/ |
| pci_read_config_byte(dev, 0xf4, &config); |
| pci_write_config_byte(dev, 0xf4, config|0x2); |
| |
| /* |
| * read xTPR register. We may not have a pci_dev for device 8 |
| * because it might be hidden until the above write. |
| */ |
| pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word); |
| |
| if (!(word & (1 << 13))) { |
| dev_info(&dev->dev, "Intel E7520/7320/7525 detected; " |
| "disabling irq balancing and affinity\n"); |
| #ifdef CONFIG_IRQBALANCE |
| irqbalance_disable(""); |
| #endif |
| noirqdebug_setup(""); |
| #ifdef CONFIG_PROC_FS |
| no_irq_affinity = 1; |
| #endif |
| } |
| |
| /* put back the original value for config space*/ |
| if (!(config & 0x2)) |
| pci_write_config_byte(dev, 0xf4, config); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, |
| quirk_intel_irqbalance); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, |
| quirk_intel_irqbalance); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, |
| quirk_intel_irqbalance); |
| #endif |
| |
| #if defined(CONFIG_HPET_TIMER) |
| unsigned long force_hpet_address; |
| |
| static enum { |
| NONE_FORCE_HPET_RESUME, |
| OLD_ICH_FORCE_HPET_RESUME, |
| ICH_FORCE_HPET_RESUME, |
| VT8237_FORCE_HPET_RESUME, |
| NVIDIA_FORCE_HPET_RESUME, |
| ATI_FORCE_HPET_RESUME, |
| } force_hpet_resume_type; |
| |
| static void __iomem *rcba_base; |
| |
| static void ich_force_hpet_resume(void) |
| { |
| u32 val; |
| |
| if (!force_hpet_address) |
| return; |
| |
| if (rcba_base == NULL) |
| BUG(); |
| |
| /* read the Function Disable register, dword mode only */ |
| val = readl(rcba_base + 0x3404); |
| if (!(val & 0x80)) { |
| /* HPET disabled in HPTC. Trying to enable */ |
| writel(val | 0x80, rcba_base + 0x3404); |
| } |
| |
| val = readl(rcba_base + 0x3404); |
| if (!(val & 0x80)) |
| BUG(); |
| else |
| printk(KERN_DEBUG "Force enabled HPET at resume\n"); |
| |
| return; |
| } |
| |
| static void ich_force_enable_hpet(struct pci_dev *dev) |
| { |
| u32 val; |
| u32 uninitialized_var(rcba); |
| int err = 0; |
| |
| if (hpet_address || force_hpet_address) |
| return; |
| |
| pci_read_config_dword(dev, 0xF0, &rcba); |
| rcba &= 0xFFFFC000; |
| if (rcba == 0) { |
| dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; " |
| "cannot force enable HPET\n"); |
| return; |
| } |
| |
| /* use bits 31:14, 16 kB aligned */ |
| rcba_base = ioremap_nocache(rcba, 0x4000); |
| if (rcba_base == NULL) { |
| dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; " |
| "cannot force enable HPET\n"); |
| return; |
| } |
| |
| /* read the Function Disable register, dword mode only */ |
| val = readl(rcba_base + 0x3404); |
| |
| if (val & 0x80) { |
| /* HPET is enabled in HPTC. Just not reported by BIOS */ |
| val = val & 0x3; |
| force_hpet_address = 0xFED00000 | (val << 12); |
| dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " |
| "0x%lx\n", force_hpet_address); |
| iounmap(rcba_base); |
| return; |
| } |
| |
| /* HPET disabled in HPTC. Trying to enable */ |
| writel(val | 0x80, rcba_base + 0x3404); |
| |
| val = readl(rcba_base + 0x3404); |
| if (!(val & 0x80)) { |
| err = 1; |
| } else { |
| val = val & 0x3; |
| force_hpet_address = 0xFED00000 | (val << 12); |
| } |
| |
| if (err) { |
| force_hpet_address = 0; |
| iounmap(rcba_base); |
| dev_printk(KERN_DEBUG, &dev->dev, |
| "Failed to force enable HPET\n"); |
| } else { |
| force_hpet_resume_type = ICH_FORCE_HPET_RESUME; |
| dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " |
| "0x%lx\n", force_hpet_address); |
| } |
| } |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, |
| ich_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, |
| ich_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, |
| ich_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, |
| ich_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, |
| ich_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, |
| ich_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, |
| ich_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, |
| ich_force_enable_hpet); |
| |
| |
| static struct pci_dev *cached_dev; |
| |
| static void hpet_print_force_info(void) |
| { |
| printk(KERN_INFO "HPET not enabled in BIOS. " |
| "You might try hpet=force boot option\n"); |
| } |
| |
| static void old_ich_force_hpet_resume(void) |
| { |
| u32 val; |
| u32 uninitialized_var(gen_cntl); |
| |
| if (!force_hpet_address || !cached_dev) |
| return; |
| |
| pci_read_config_dword(cached_dev, 0xD0, &gen_cntl); |
| gen_cntl &= (~(0x7 << 15)); |
| gen_cntl |= (0x4 << 15); |
| |
| pci_write_config_dword(cached_dev, 0xD0, gen_cntl); |
| pci_read_config_dword(cached_dev, 0xD0, &gen_cntl); |
| val = gen_cntl >> 15; |
| val &= 0x7; |
| if (val == 0x4) |
| printk(KERN_DEBUG "Force enabled HPET at resume\n"); |
| else |
| BUG(); |
| } |
| |
| static void old_ich_force_enable_hpet(struct pci_dev *dev) |
| { |
| u32 val; |
| u32 uninitialized_var(gen_cntl); |
| |
| if (hpet_address || force_hpet_address) |
| return; |
| |
| pci_read_config_dword(dev, 0xD0, &gen_cntl); |
| /* |
| * Bit 17 is HPET enable bit. |
| * Bit 16:15 control the HPET base address. |
| */ |
| val = gen_cntl >> 15; |
| val &= 0x7; |
| if (val & 0x4) { |
| val &= 0x3; |
| force_hpet_address = 0xFED00000 | (val << 12); |
| dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n", |
| force_hpet_address); |
| return; |
| } |
| |
| /* |
| * HPET is disabled. Trying enabling at FED00000 and check |
| * whether it sticks |
| */ |
| gen_cntl &= (~(0x7 << 15)); |
| gen_cntl |= (0x4 << 15); |
| pci_write_config_dword(dev, 0xD0, gen_cntl); |
| |
| pci_read_config_dword(dev, 0xD0, &gen_cntl); |
| |
| val = gen_cntl >> 15; |
| val &= 0x7; |
| if (val & 0x4) { |
| /* HPET is enabled in HPTC. Just not reported by BIOS */ |
| val &= 0x3; |
| force_hpet_address = 0xFED00000 | (val << 12); |
| dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " |
| "0x%lx\n", force_hpet_address); |
| cached_dev = dev; |
| force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME; |
| return; |
| } |
| |
| dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n"); |
| } |
| |
| /* |
| * Undocumented chipset features. Make sure that the user enforced |
| * this. |
| */ |
| static void old_ich_force_enable_hpet_user(struct pci_dev *dev) |
| { |
| if (hpet_force_user) |
| old_ich_force_enable_hpet(dev); |
| else |
| hpet_print_force_info(); |
| } |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, |
| old_ich_force_enable_hpet_user); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, |
| old_ich_force_enable_hpet_user); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, |
| old_ich_force_enable_hpet_user); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, |
| old_ich_force_enable_hpet_user); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, |
| old_ich_force_enable_hpet_user); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, |
| old_ich_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12, |
| old_ich_force_enable_hpet); |
| |
| |
| static void vt8237_force_hpet_resume(void) |
| { |
| u32 val; |
| |
| if (!force_hpet_address || !cached_dev) |
| return; |
| |
| val = 0xfed00000 | 0x80; |
| pci_write_config_dword(cached_dev, 0x68, val); |
| |
| pci_read_config_dword(cached_dev, 0x68, &val); |
| if (val & 0x80) |
| printk(KERN_DEBUG "Force enabled HPET at resume\n"); |
| else |
| BUG(); |
| } |
| |
| static void vt8237_force_enable_hpet(struct pci_dev *dev) |
| { |
| u32 uninitialized_var(val); |
| |
| if (hpet_address || force_hpet_address) |
| return; |
| |
| if (!hpet_force_user) { |
| hpet_print_force_info(); |
| return; |
| } |
| |
| pci_read_config_dword(dev, 0x68, &val); |
| /* |
| * Bit 7 is HPET enable bit. |
| * Bit 31:10 is HPET base address (contrary to what datasheet claims) |
| */ |
| if (val & 0x80) { |
| force_hpet_address = (val & ~0x3ff); |
| dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n", |
| force_hpet_address); |
| return; |
| } |
| |
| /* |
| * HPET is disabled. Trying enabling at FED00000 and check |
| * whether it sticks |
| */ |
| val = 0xfed00000 | 0x80; |
| pci_write_config_dword(dev, 0x68, val); |
| |
| pci_read_config_dword(dev, 0x68, &val); |
| if (val & 0x80) { |
| force_hpet_address = (val & ~0x3ff); |
| dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " |
| "0x%lx\n", force_hpet_address); |
| cached_dev = dev; |
| force_hpet_resume_type = VT8237_FORCE_HPET_RESUME; |
| return; |
| } |
| |
| dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n"); |
| } |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, |
| vt8237_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, |
| vt8237_force_enable_hpet); |
| |
| static void ati_force_hpet_resume(void) |
| { |
| pci_write_config_dword(cached_dev, 0x14, 0xfed00000); |
| printk(KERN_DEBUG "Force enabled HPET at resume\n"); |
| } |
| |
| static void ati_force_enable_hpet(struct pci_dev *dev) |
| { |
| u32 uninitialized_var(val); |
| |
| if (hpet_address || force_hpet_address) |
| return; |
| |
| if (!hpet_force_user) { |
| hpet_print_force_info(); |
| return; |
| } |
| |
| pci_write_config_dword(dev, 0x14, 0xfed00000); |
| pci_read_config_dword(dev, 0x14, &val); |
| force_hpet_address = val; |
| force_hpet_resume_type = ATI_FORCE_HPET_RESUME; |
| dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", |
| force_hpet_address); |
| cached_dev = dev; |
| return; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, |
| ati_force_enable_hpet); |
| |
| /* |
| * Undocumented chipset feature taken from LinuxBIOS. |
| */ |
| static void nvidia_force_hpet_resume(void) |
| { |
| pci_write_config_dword(cached_dev, 0x44, 0xfed00001); |
| printk(KERN_DEBUG "Force enabled HPET at resume\n"); |
| } |
| |
| static void nvidia_force_enable_hpet(struct pci_dev *dev) |
| { |
| u32 uninitialized_var(val); |
| |
| if (hpet_address || force_hpet_address) |
| return; |
| |
| if (!hpet_force_user) { |
| hpet_print_force_info(); |
| return; |
| } |
| |
| pci_write_config_dword(dev, 0x44, 0xfed00001); |
| pci_read_config_dword(dev, 0x44, &val); |
| force_hpet_address = val & 0xfffffffe; |
| force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME; |
| dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", |
| force_hpet_address); |
| cached_dev = dev; |
| return; |
| } |
| |
| /* ISA Bridges */ |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050, |
| nvidia_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051, |
| nvidia_force_enable_hpet); |
| |
| /* LPC bridges */ |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260, |
| nvidia_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360, |
| nvidia_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361, |
| nvidia_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362, |
| nvidia_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363, |
| nvidia_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364, |
| nvidia_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365, |
| nvidia_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366, |
| nvidia_force_enable_hpet); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367, |
| nvidia_force_enable_hpet); |
| |
| void force_hpet_resume(void) |
| { |
| switch (force_hpet_resume_type) { |
| case ICH_FORCE_HPET_RESUME: |
| ich_force_hpet_resume(); |
| return; |
| case OLD_ICH_FORCE_HPET_RESUME: |
| old_ich_force_hpet_resume(); |
| return; |
| case VT8237_FORCE_HPET_RESUME: |
| vt8237_force_hpet_resume(); |
| return; |
| case NVIDIA_FORCE_HPET_RESUME: |
| nvidia_force_hpet_resume(); |
| return; |
| case ATI_FORCE_HPET_RESUME: |
| ati_force_hpet_resume(); |
| return; |
| default: |
| break; |
| } |
| } |
| |
| #endif |