| /* |
| * mmconfig.c - Low-level direct PCI config space access via MMCONFIG |
| * |
| * This is an 64bit optimized version that always keeps the full mmconfig |
| * space mapped. This allows lockless config space operation. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/acpi.h> |
| #include <linux/bitmap.h> |
| #include <asm/e820.h> |
| |
| #include "pci.h" |
| |
| /* Static virtual mapping of the MMCONFIG aperture */ |
| struct mmcfg_virt { |
| struct acpi_mcfg_allocation *cfg; |
| char __iomem *virt; |
| }; |
| static struct mmcfg_virt *pci_mmcfg_virt; |
| |
| static char __iomem *get_virt(unsigned int seg, unsigned bus) |
| { |
| struct acpi_mcfg_allocation *cfg; |
| int cfg_num; |
| |
| for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { |
| cfg = pci_mmcfg_virt[cfg_num].cfg; |
| if (cfg->pci_segment == seg && |
| (cfg->start_bus_number <= bus) && |
| (cfg->end_bus_number >= bus)) |
| return pci_mmcfg_virt[cfg_num].virt; |
| } |
| |
| /* Fall back to type 0 */ |
| return NULL; |
| } |
| |
| static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) |
| { |
| char __iomem *addr; |
| |
| addr = get_virt(seg, bus); |
| if (!addr) |
| return NULL; |
| return addr + ((bus << 20) | (devfn << 12)); |
| } |
| |
| static int pci_mmcfg_read(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 *value) |
| { |
| char __iomem *addr; |
| |
| /* Why do we have this when nobody checks it. How about a BUG()!? -AK */ |
| if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) { |
| err: *value = -1; |
| return -EINVAL; |
| } |
| |
| addr = pci_dev_base(seg, bus, devfn); |
| if (!addr) |
| goto err; |
| |
| switch (len) { |
| case 1: |
| *value = mmio_config_readb(addr + reg); |
| break; |
| case 2: |
| *value = mmio_config_readw(addr + reg); |
| break; |
| case 4: |
| *value = mmio_config_readl(addr + reg); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int pci_mmcfg_write(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 value) |
| { |
| char __iomem *addr; |
| |
| /* Why do we have this when nobody checks it. How about a BUG()!? -AK */ |
| if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) |
| return -EINVAL; |
| |
| addr = pci_dev_base(seg, bus, devfn); |
| if (!addr) |
| return -EINVAL; |
| |
| switch (len) { |
| case 1: |
| mmio_config_writeb(addr + reg, value); |
| break; |
| case 2: |
| mmio_config_writew(addr + reg, value); |
| break; |
| case 4: |
| mmio_config_writel(addr + reg, value); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static struct pci_raw_ops pci_mmcfg = { |
| .read = pci_mmcfg_read, |
| .write = pci_mmcfg_write, |
| }; |
| |
| static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) |
| { |
| void __iomem *addr; |
| u32 size; |
| |
| size = (cfg->end_bus_number + 1) << 20; |
| addr = ioremap_nocache(cfg->address, size); |
| if (addr) { |
| printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n", |
| cfg->address, cfg->address + size - 1); |
| } |
| return addr; |
| } |
| |
| int __init pci_mmcfg_arch_init(void) |
| { |
| int i; |
| pci_mmcfg_virt = kzalloc(sizeof(*pci_mmcfg_virt) * |
| pci_mmcfg_config_num, GFP_KERNEL); |
| if (pci_mmcfg_virt == NULL) { |
| printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); |
| return 0; |
| } |
| |
| for (i = 0; i < pci_mmcfg_config_num; ++i) { |
| pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; |
| pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]); |
| if (!pci_mmcfg_virt[i].virt) { |
| printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " |
| "segment %d\n", |
| pci_mmcfg_config[i].pci_segment); |
| pci_mmcfg_arch_free(); |
| return 0; |
| } |
| } |
| raw_pci_ext_ops = &pci_mmcfg; |
| return 1; |
| } |
| |
| void __init pci_mmcfg_arch_free(void) |
| { |
| int i; |
| |
| if (pci_mmcfg_virt == NULL) |
| return; |
| |
| for (i = 0; i < pci_mmcfg_config_num; ++i) { |
| if (pci_mmcfg_virt[i].virt) { |
| iounmap(pci_mmcfg_virt[i].virt); |
| pci_mmcfg_virt[i].virt = NULL; |
| pci_mmcfg_virt[i].cfg = NULL; |
| } |
| } |
| |
| kfree(pci_mmcfg_virt); |
| pci_mmcfg_virt = NULL; |
| } |