| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) Intel Corp. 2007. |
| * All Rights Reserved. |
| * |
| * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to |
| * develop this driver. |
| * |
| * This file is part of the Carillo Ranch video subsystem driver. |
| * |
| * Authors: |
| * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com> |
| * Alan Hourihane <alanh-at-tungstengraphics-dot-com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/mutex.h> |
| #include <linux/fb.h> |
| #include <linux/backlight.h> |
| #include <linux/lcd.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| |
| /* The LVDS- and panel power controls sits on the |
| * GPIO port of the ISA bridge. |
| */ |
| |
| #define CRVML_DEVICE_LPC 0x27B8 |
| #define CRVML_REG_GPIOBAR 0x48 |
| #define CRVML_REG_GPIOEN 0x4C |
| #define CRVML_GPIOEN_BIT (1 << 4) |
| #define CRVML_PANEL_PORT 0x38 |
| #define CRVML_LVDS_ON 0x00000001 |
| #define CRVML_PANEL_ON 0x00000002 |
| #define CRVML_BACKLIGHT_OFF 0x00000004 |
| |
| /* The PLL Clock register sits on Host bridge */ |
| #define CRVML_DEVICE_MCH 0x5001 |
| #define CRVML_REG_MCHBAR 0x44 |
| #define CRVML_REG_MCHEN 0x54 |
| #define CRVML_MCHEN_BIT (1 << 28) |
| #define CRVML_MCHMAP_SIZE 4096 |
| #define CRVML_REG_CLOCK 0xc3c |
| #define CRVML_CLOCK_SHIFT 8 |
| #define CRVML_CLOCK_MASK 0x00000f00 |
| |
| static struct pci_dev *lpc_dev; |
| static u32 gpio_bar; |
| |
| struct cr_panel { |
| struct backlight_device *cr_backlight_device; |
| struct lcd_device *cr_lcd_device; |
| }; |
| |
| static int cr_backlight_set_intensity(struct backlight_device *bd) |
| { |
| u32 addr = gpio_bar + CRVML_PANEL_PORT; |
| u32 cur = inl(addr); |
| |
| if (backlight_get_brightness(bd) == 0) { |
| /* OFF */ |
| cur |= CRVML_BACKLIGHT_OFF; |
| outl(cur, addr); |
| } else { |
| /* FULL ON */ |
| cur &= ~CRVML_BACKLIGHT_OFF; |
| outl(cur, addr); |
| } |
| |
| return 0; |
| } |
| |
| static int cr_backlight_get_intensity(struct backlight_device *bd) |
| { |
| u32 addr = gpio_bar + CRVML_PANEL_PORT; |
| u32 cur = inl(addr); |
| u8 intensity; |
| |
| if (cur & CRVML_BACKLIGHT_OFF) |
| intensity = 0; |
| else |
| intensity = 1; |
| |
| return intensity; |
| } |
| |
| static const struct backlight_ops cr_backlight_ops = { |
| .get_brightness = cr_backlight_get_intensity, |
| .update_status = cr_backlight_set_intensity, |
| }; |
| |
| static void cr_panel_on(void) |
| { |
| u32 addr = gpio_bar + CRVML_PANEL_PORT; |
| u32 cur = inl(addr); |
| |
| if (!(cur & CRVML_PANEL_ON)) { |
| /* Make sure LVDS controller is down. */ |
| if (cur & 0x00000001) { |
| cur &= ~CRVML_LVDS_ON; |
| outl(cur, addr); |
| } |
| /* Power up Panel */ |
| schedule_timeout(HZ / 10); |
| cur |= CRVML_PANEL_ON; |
| outl(cur, addr); |
| } |
| |
| /* Power up LVDS controller */ |
| |
| if (!(cur & CRVML_LVDS_ON)) { |
| schedule_timeout(HZ / 10); |
| outl(cur | CRVML_LVDS_ON, addr); |
| } |
| } |
| |
| static void cr_panel_off(void) |
| { |
| u32 addr = gpio_bar + CRVML_PANEL_PORT; |
| u32 cur = inl(addr); |
| |
| /* Power down LVDS controller first to avoid high currents */ |
| if (cur & CRVML_LVDS_ON) { |
| cur &= ~CRVML_LVDS_ON; |
| outl(cur, addr); |
| } |
| if (cur & CRVML_PANEL_ON) { |
| schedule_timeout(HZ / 10); |
| outl(cur & ~CRVML_PANEL_ON, addr); |
| } |
| } |
| |
| static int cr_lcd_set_power(struct lcd_device *ld, int power) |
| { |
| if (power == FB_BLANK_UNBLANK) |
| cr_panel_on(); |
| if (power == FB_BLANK_POWERDOWN) |
| cr_panel_off(); |
| |
| return 0; |
| } |
| |
| static struct lcd_ops cr_lcd_ops = { |
| .set_power = cr_lcd_set_power, |
| }; |
| |
| static int cr_backlight_probe(struct platform_device *pdev) |
| { |
| struct backlight_properties props; |
| struct backlight_device *bdp; |
| struct lcd_device *ldp; |
| struct cr_panel *crp; |
| u8 dev_en; |
| |
| lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL, |
| CRVML_DEVICE_LPC, NULL); |
| if (!lpc_dev) { |
| pr_err("INTEL CARILLO RANCH LPC not found.\n"); |
| return -ENODEV; |
| } |
| |
| pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en); |
| if (!(dev_en & CRVML_GPIOEN_BIT)) { |
| pr_err("Carillo Ranch GPIO device was not enabled.\n"); |
| pci_dev_put(lpc_dev); |
| return -ENODEV; |
| } |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_RAW; |
| bdp = devm_backlight_device_register(&pdev->dev, "cr-backlight", |
| &pdev->dev, NULL, &cr_backlight_ops, |
| &props); |
| if (IS_ERR(bdp)) { |
| pci_dev_put(lpc_dev); |
| return PTR_ERR(bdp); |
| } |
| |
| ldp = devm_lcd_device_register(&pdev->dev, "cr-lcd", &pdev->dev, NULL, |
| &cr_lcd_ops); |
| if (IS_ERR(ldp)) { |
| pci_dev_put(lpc_dev); |
| return PTR_ERR(ldp); |
| } |
| |
| pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR, |
| &gpio_bar); |
| gpio_bar &= ~0x3F; |
| |
| crp = devm_kzalloc(&pdev->dev, sizeof(*crp), GFP_KERNEL); |
| if (!crp) { |
| pci_dev_put(lpc_dev); |
| return -ENOMEM; |
| } |
| |
| crp->cr_backlight_device = bdp; |
| crp->cr_lcd_device = ldp; |
| crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK; |
| crp->cr_backlight_device->props.brightness = 0; |
| cr_backlight_set_intensity(crp->cr_backlight_device); |
| cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK); |
| |
| platform_set_drvdata(pdev, crp); |
| |
| return 0; |
| } |
| |
| static int cr_backlight_remove(struct platform_device *pdev) |
| { |
| struct cr_panel *crp = platform_get_drvdata(pdev); |
| |
| crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN; |
| crp->cr_backlight_device->props.brightness = 0; |
| crp->cr_backlight_device->props.max_brightness = 0; |
| cr_backlight_set_intensity(crp->cr_backlight_device); |
| cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN); |
| pci_dev_put(lpc_dev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver cr_backlight_driver = { |
| .probe = cr_backlight_probe, |
| .remove = cr_backlight_remove, |
| .driver = { |
| .name = "cr_backlight", |
| }, |
| }; |
| |
| static struct platform_device *crp; |
| |
| static int __init cr_backlight_init(void) |
| { |
| int ret = platform_driver_register(&cr_backlight_driver); |
| |
| if (ret) |
| return ret; |
| |
| crp = platform_device_register_simple("cr_backlight", -1, NULL, 0); |
| if (IS_ERR(crp)) { |
| platform_driver_unregister(&cr_backlight_driver); |
| return PTR_ERR(crp); |
| } |
| |
| pr_info("Carillo Ranch Backlight Driver Initialized.\n"); |
| |
| return 0; |
| } |
| |
| static void __exit cr_backlight_exit(void) |
| { |
| platform_device_unregister(crp); |
| platform_driver_unregister(&cr_backlight_driver); |
| } |
| |
| module_init(cr_backlight_init); |
| module_exit(cr_backlight_exit); |
| |
| MODULE_AUTHOR("Tungsten Graphics Inc."); |
| MODULE_DESCRIPTION("Carillo Ranch Backlight Driver"); |
| MODULE_LICENSE("GPL"); |