Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
index 3aaefdb..9017c5a 100644
--- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
@@ -18,6 +18,7 @@
- const: brcm,gisb-arb
- items:
- enum:
+ - brcm,bcm74165-gisb-arb # for V7 new style 16nm chips
- brcm,bcm7278-gisb-arb # for V7 28nm chips
- brcm,bcm7435-gisb-arb # for newer 40nm chips
- brcm,bcm7400-gisb-arb # for older 40nm chips and all 65nm chips
diff --git a/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml b/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml
new file mode 100644
index 0000000..52a59d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores PWM controller
+
+maintainers:
+ - William Qiu <william.qiu@starfivetech.com>
+
+description:
+ The OpenCores PTC ip core contains a PWM controller. When operating in PWM
+ mode, the PTC core generates binary signal with user-programmable low and
+ high periods. All PTC counters and registers are 32-bit.
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - starfive,jh7100-pwm
+ - starfive,jh7110-pwm
+ - starfive,jh8100-pwm
+ - const: opencores,pwm-v1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 3
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ pwm@12490000 {
+ compatible = "starfive,jh7110-pwm", "opencores,pwm-v1";
+ reg = <0x12490000 0x10000>;
+ clocks = <&clkgen 181>;
+ resets = <&rstgen 109>;
+ #pwm-cells = <3>;
+ };
diff --git a/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
new file mode 100644
index 0000000..76e1931
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/sophgo,sg2042-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 SoC Reset Controller
+
+maintainers:
+ - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+ compatible:
+ const: sophgo,sg2042-reset
+
+ reg:
+ maxItems: 1
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ rstgen: reset-controller@c00 {
+ compatible = "sophgo,sg2042-reset";
+ reg = <0xc00 0xc>;
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 9d8670c..b252c39 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -75,6 +75,10 @@
- riscv,sv57
- riscv,none
+ reg:
+ description:
+ The hart ID of this CPU node.
+
riscv,cbom-block-size:
$ref: /schemas/types.yaml#/definitions/uint32
description:
diff --git a/MAINTAINERS b/MAINTAINERS
index 1339918..43b3995 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8987,6 +8987,11 @@
F: drivers/i2c/muxes/i2c-mux-gpio.c
F: include/linux/platform_data/i2c-mux-gpio.h
+GENERIC GPIO RESET DRIVER
+M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+S: Maintained
+F: drivers/reset/reset-gpio.c
+
GENERIC HDLC (WAN) DRIVERS
M: Krzysztof Halasa <khc@pm.waw.pl>
S: Maintained
diff --git a/arch/arm/boot/dts/ti/omap/am33xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-clocks.dtsi
index d34483a..99b62c6 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx-clocks.dtsi
@@ -108,30 +108,31 @@
compatible = "ti,clksel";
reg = <0x664>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- ehrpwm0_tbclk: clock-ehrpwm0-tbclk {
+ ehrpwm0_tbclk: clock-ehrpwm0-tbclk@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "ehrpwm0_tbclk";
clocks = <&l4ls_gclk>;
- ti,bit-shift = <0>;
};
- ehrpwm1_tbclk: clock-ehrpwm1-tbclk {
+ ehrpwm1_tbclk: clock-ehrpwm1-tbclk@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "ehrpwm1_tbclk";
clocks = <&l4ls_gclk>;
- ti,bit-shift = <1>;
};
- ehrpwm2_tbclk: clock-ehrpwm2-tbclk {
+ ehrpwm2_tbclk: clock-ehrpwm2-tbclk@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "ehrpwm2_tbclk";
clocks = <&l4ls_gclk>;
- ti,bit-shift = <2>;
};
};
};
@@ -566,17 +567,19 @@
compatible = "ti,clksel";
reg = <0x52c>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- gfx_fclk_clksel_ck: clock-gfx-fclk-clksel {
+ gfx_fclk_clksel_ck: clock-gfx-fclk-clksel@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,mux-clock";
clock-output-names = "gfx_fclk_clksel_ck";
clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
- ti,bit-shift = <1>;
};
- gfx_fck_div_ck: clock-gfx-fck-div {
+ gfx_fck_div_ck: clock-gfx-fck-div@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "gfx_fck_div_ck";
@@ -589,30 +592,32 @@
compatible = "ti,clksel";
reg = <0x700>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- sysclkout_pre_ck: clock-sysclkout-pre {
+ sysclkout_pre_ck: clock-sysclkout-pre@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,mux-clock";
clock-output-names = "sysclkout_pre_ck";
clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
};
- clkout2_div_ck: clock-clkout2-div {
+ clkout2_div_ck: clock-clkout2-div@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "clkout2_div_ck";
clocks = <&sysclkout_pre_ck>;
- ti,bit-shift = <3>;
ti,max-div = <8>;
};
- clkout2_ck: clock-clkout2 {
+ clkout2_ck: clock-clkout2@7 {
+ reg = <7>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "clkout2_ck";
clocks = <&clkout2_div_ck>;
- ti,bit-shift = <7>;
};
};
};
diff --git a/arch/arm/boot/dts/ti/omap/am35xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/am35xx-clocks.dtsi
index 0ee7afa..b521139e 100644
--- a/arch/arm/boot/dts/ti/omap/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am35xx-clocks.dtsi
@@ -66,22 +66,23 @@
compatible = "ti,clksel";
reg = <0xa10>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- ipss_ick: clock-ipss-ick {
+ ipss_ick: clock-ipss-ick@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,am35xx-interface-clock";
clock-output-names = "ipss_ick";
clocks = <&core_l3_ick>;
- ti,bit-shift = <4>;
};
- uart4_ick_am35xx: clock-uart4-ick-am35xx {
+ uart4_ick_am35xx: clock-uart4-ick-am35xx@23 {
+ reg = <23>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "uart4_ick_am35xx";
clocks = <&core_l4_ick>;
- ti,bit-shift = <23>;
};
};
@@ -101,14 +102,15 @@
compatible = "ti,clksel";
reg = <0xa00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- uart4_fck_am35xx: clock-uart4-fck-am35xx {
+ uart4_fck_am35xx: clock-uart4-fck-am35xx@23 {
+ reg = <23>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "uart4_fck_am35xx";
clocks = <&core_48m_fck>;
- ti,bit-shift = <23>;
};
};
};
diff --git a/arch/arm/boot/dts/ti/omap/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap3430es1-clocks.dtsi
index 24adfac..6e754d2 100644
--- a/arch/arm/boot/dts/ti/omap/omap3430es1-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3430es1-clocks.dtsi
@@ -50,30 +50,31 @@
compatible = "ti,clksel";
reg = <0xa00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- d2d_26m_fck: clock-d2d-26m-fck {
+ d2d_26m_fck: clock-d2d-26m-fck@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "d2d_26m_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <3>;
};
- fshostusb_fck: clock-fshostusb-fck {
+ fshostusb_fck: clock-fshostusb-fck@5 {
+ reg = <5>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "fshostusb_fck";
clocks = <&core_48m_fck>;
- ti,bit-shift = <5>;
};
- ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 {
+ ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
clock-output-names = "ssi_ssr_gate_fck_3430es1";
clocks = <&corex2_fck>;
- ti,bit-shift = <0>;
};
};
@@ -81,23 +82,24 @@
compatible = "ti,clksel";
reg = <0xa40>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 {
+ ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1@8 {
+ reg = <8>;
#clock-cells = <0>;
compatible = "ti,composite-divider-clock";
clock-output-names = "ssi_ssr_div_fck_3430es1";
clocks = <&corex2_fck>;
- ti,bit-shift = <8>;
ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
};
- usb_l4_div_ick: clock-usb-l4-div-ick {
+ usb_l4_div_ick: clock-usb-l4-div-ick@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,composite-divider-clock";
clock-output-names = "usb_l4_div_ick";
clocks = <&l4_ick>;
- ti,bit-shift = <4>;
ti,max-div = <1>;
ti,index-starts-at-one;
};
@@ -121,38 +123,39 @@
compatible = "ti,clksel";
reg = <0xa10>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 {
+ hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,omap3-no-wait-interface-clock";
clock-output-names = "hsotgusb_ick_3430es1";
clocks = <&core_l3_ick>;
- ti,bit-shift = <4>;
};
- fac_ick: clock-fac-ick {
+ fac_ick: clock-fac-ick@8 {
+ reg = <8>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "fac_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <8>;
};
- ssi_ick: clock-ssi-ick-3430es1 {
+ ssi_ick: clock-ssi-ick-3430es1@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,omap3-no-wait-interface-clock";
clock-output-names = "ssi_ick_3430es1";
clocks = <&ssi_l4_ick>;
- ti,bit-shift = <0>;
};
- usb_l4_gate_ick: clock-usb-l4-gate-ick {
+ usb_l4_gate_ick: clock-usb-l4-gate-ick@5 {
+ reg = <5>;
#clock-cells = <0>;
compatible = "ti,composite-interface-clock";
clock-output-names = "usb_l4_gate_ick";
clocks = <&l4_ick>;
- ti,bit-shift = <5>;
};
};
@@ -174,14 +177,15 @@
compatible = "ti,clksel";
reg = <0xe00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 {
+ dss1_alwon_fck: clock-dss1-alwon-fck-3430es1@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "dss1_alwon_fck_3430es1";
clocks = <&dpll4_m4x2_ck>;
- ti,bit-shift = <0>;
ti,set-rate-parent;
};
};
diff --git a/arch/arm/boot/dts/ti/omap/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap34xx-omap36xx-clocks.dtsi
index 8374532..ca63727 100644
--- a/arch/arm/boot/dts/ti/omap/omap34xx-omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap34xx-omap36xx-clocks.dtsi
@@ -17,46 +17,47 @@
compatible = "ti,clksel";
reg = <0xa14>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- aes1_ick: clock-aes1-ick {
+ aes1_ick: clock-aes1-ick@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "aes1_ick";
clocks = <&security_l4_ick2>;
- ti,bit-shift = <3>;
};
- rng_ick: clock-rng-ick {
+ rng_ick: clock-rng-ick@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "rng_ick";
clocks = <&security_l4_ick2>;
- ti,bit-shift = <2>;
};
- sha11_ick: clock-sha11-ick {
+ sha11_ick: clock-sha11-ick@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "sha11_ick";
clocks = <&security_l4_ick2>;
- ti,bit-shift = <1>;
};
- des1_ick: clock-des1-ick {
+ des1_ick: clock-des1-ick@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "des1_ick";
clocks = <&security_l4_ick2>;
- ti,bit-shift = <0>;
};
- pka_ick: clock-pka-ick {
+ pka_ick: clock-pka-ick@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "pka_ick";
clocks = <&security_l3_ick>;
- ti,bit-shift = <4>;
};
};
@@ -65,23 +66,24 @@
compatible = "ti,clksel";
reg = <0xf00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- cam_mclk: clock-cam-mclk {
+ cam_mclk: clock-cam-mclk@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "cam_mclk";
clocks = <&dpll4_m5x2_ck>;
- ti,bit-shift = <0>;
ti,set-rate-parent;
};
- csi2_96m_fck: clock-csi2-96m-fck {
+ csi2_96m_fck: clock-csi2-96m-fck@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "csi2_96m_fck";
clocks = <&core_96m_fck>;
- ti,bit-shift = <1>;
};
};
@@ -105,46 +107,47 @@
compatible = "ti,clksel";
reg = <0xa10>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- icr_ick: clock-icr-ick {
+ icr_ick: clock-icr-ick@29 {
+ reg = <29>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "icr_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <29>;
};
- des2_ick: clock-des2-ick {
+ des2_ick: clock-des2-ick@26 {
+ reg = <26>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "des2_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <26>;
};
- mspro_ick: clock-mspro-ick {
+ mspro_ick: clock-mspro-ick@23 {
+ reg = <23>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mspro_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <23>;
};
- mailboxes_ick: clock-mailboxes-ick {
+ mailboxes_ick: clock-mailboxes-ick@7 {
+ reg = <7>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mailboxes_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <7>;
};
- sad2d_ick: clock-sad2d-ick {
+ sad2d_ick: clock-sad2d-ick@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "sad2d_ick";
clocks = <&l3_ick>;
- ti,bit-shift = <3>;
};
};
@@ -160,22 +163,23 @@
compatible = "ti,clksel";
reg = <0xc00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- sr1_fck: clock-sr1-fck {
+ sr1_fck: clock-sr1-fck@6 {
+ reg = <6>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "sr1_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <6>;
};
- sr2_fck: clock-sr2-fck {
+ sr2_fck: clock-sr2-fck@7 {
+ reg = <7>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "sr2_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <7>;
};
};
@@ -228,22 +232,23 @@
compatible = "ti,clksel";
reg = <0xa00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- modem_fck: clock-modem-fck {
+ modem_fck: clock-modem-fck@31 {
+ reg = <31>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "modem_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <31>;
};
- mspro_fck: clock-mspro-fck {
+ mspro_fck: clock-mspro-fck@23 {
+ reg = <23>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "mspro_fck";
clocks = <&core_96m_fck>;
- ti,bit-shift = <23>;
};
};
@@ -252,14 +257,15 @@
compatible = "ti,clksel";
reg = <0xa18>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #ssize-cells = <0>;
- mad2d_ick: clock-mad2d-ick {
+ mad2d_ick: clock-mad2d-ick@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mad2d_ick";
clocks = <&l3_ick>;
- ti,bit-shift = <3>;
};
};
diff --git a/arch/arm/boot/dts/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
index dcc5cfcd..656cf80f 100644
--- a/arch/arm/boot/dts/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -138,14 +138,15 @@
compatible = "ti,clksel";
reg = <0xa18>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- usbtll_ick: clock-usbtll-ick {
+ usbtll_ick: clock-usbtll-ick@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "usbtll_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <2>;
};
};
@@ -153,14 +154,15 @@
compatible = "ti,clksel";
reg = <0xa10>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- mmchs3_ick: clock-mmchs3-ick {
+ mmchs3_ick: clock-mmchs3-ick@30 {
+ reg = <30>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mmchs3_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <30>;
};
};
@@ -168,14 +170,15 @@
compatible = "ti,clksel";
reg = <0xa00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- mmchs3_fck: clock-mmchs3-fck {
+ mmchs3_fck: clock-mmchs3-fck@30 {
+ reg = <30>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "mmchs3_fck";
clocks = <&core_96m_fck>;
- ti,bit-shift = <30>;
};
};
@@ -183,14 +186,15 @@
compatible = "ti,clksel";
reg = <0xe00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 {
+ dss1_alwon_fck: clock-dss1-alwon-fck-3430es2@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,dss-gate-clock";
clock-output-names = "dss1_alwon_fck_3430es2";
clocks = <&dpll4_m4x2_ck>;
- ti,bit-shift = <0>;
ti,set-rate-parent;
};
};
diff --git a/arch/arm/boot/dts/ti/omap/omap36xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap36xx-clocks.dtsi
index c5fdb2b..1e90f2b 100644
--- a/arch/arm/boot/dts/ti/omap/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap36xx-clocks.dtsi
@@ -62,14 +62,15 @@
compatible = "ti,clksel";
reg = <0x1000>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- uart4_fck: clock-uart4-fck {
+ uart4_fck: clock-uart4-fck@18 {
+ reg = <18>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "uart4_fck";
clocks = <&per_48m_fck>;
- ti,bit-shift = <18>;
};
};
};
diff --git a/arch/arm/boot/dts/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
index c94eb86..798acb8 100644
--- a/arch/arm/boot/dts/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
@@ -9,14 +9,15 @@
compatible = "ti,clksel";
reg = <0xa00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 {
+ ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
clock-output-names = "ssi_ssr_gate_fck_3430es2";
clocks = <&corex2_fck>;
- ti,bit-shift = <0>;
};
};
@@ -24,14 +25,15 @@
compatible = "ti,clksel";
reg = <0xa40>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 {
+ ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2@8 {
+ reg = <8>;
#clock-cells = <0>;
compatible = "ti,composite-divider-clock";
clock-output-names = "ssi_ssr_div_fck_3430es2";
clocks = <&corex2_fck>;
- ti,bit-shift = <8>;
ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
};
};
@@ -54,22 +56,23 @@
compatible = "ti,clksel";
reg = <0xa10>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 {
+ hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,omap3-hsotgusb-interface-clock";
clock-output-names = "hsotgusb_ick_3430es2";
clocks = <&core_l3_ick>;
- ti,bit-shift = <4>;
};
- ssi_ick: clock-ssi-ick-3430es2 {
+ ssi_ick: clock-ssi-ick-3430es2@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,omap3-ssi-interface-clock";
clock-output-names = "ssi_ick_3430es2";
clocks = <&ssi_l4_ick>;
- ti,bit-shift = <0>;
};
};
@@ -85,14 +88,15 @@
compatible = "ti,clksel";
reg = <0xc00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- usim_gate_fck: clock-usim-gate-fck {
+ usim_gate_fck: clock-usim-gate-fck@9 {
+ reg = <9>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "usim_gate_fck";
clocks = <&omap_96m_fck>;
- ti,bit-shift = <9>;
};
};
@@ -172,14 +176,15 @@
compatible = "ti,clksel";
reg = <0xc40>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- usim_mux_fck: clock-usim-mux-fck {
+ usim_mux_fck: clock-usim-mux-fck@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "usim_mux_fck";
clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
- ti,bit-shift = <3>;
ti,index-starts-at-one;
};
};
@@ -194,14 +199,15 @@
compatible = "ti,clksel";
reg = <0xc10>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- usim_ick: clock-usim-ick {
+ usim_ick: clock-usim-ick@9 {
+ reg = <9>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "usim_ick";
clocks = <&wkup_l4_ick>;
- ti,bit-shift = <9>;
};
};
};
diff --git a/arch/arm/boot/dts/ti/omap/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap3xxx-clocks.dtsi
index 2e13ca1..901ee79a 100644
--- a/arch/arm/boot/dts/ti/omap/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3xxx-clocks.dtsi
@@ -83,29 +83,31 @@
compatible = "ti,clksel";
reg = <0x68>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- mcbsp5_mux_fck: clock-mcbsp5-mux-fck {
+ mcbsp5_mux_fck: clock-mcbsp5-mux-fck@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "mcbsp5_mux_fck";
clocks = <&core_96m_fck>, <&mcbsp_clks>;
- ti,bit-shift = <4>;
};
- mcbsp3_mux_fck: clock-mcbsp3-mux-fck {
+ mcbsp3_mux_fck: clock-mcbsp3-mux-fck@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "mcbsp3_mux_fck";
clocks = <&per_96m_fck>, <&mcbsp_clks>;
};
- mcbsp4_mux_fck: clock-mcbsp4-mux-fck {
+ mcbsp4_mux_fck: clock-mcbsp4-mux-fck@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "mcbsp4_mux_fck";
clocks = <&per_96m_fck>, <&mcbsp_clks>;
- ti,bit-shift = <2>;
};
};
@@ -120,22 +122,23 @@
compatible = "ti,clksel";
reg = <0x4>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- mcbsp1_mux_fck: clock-mcbsp1-mux-fck {
+ mcbsp1_mux_fck: clock-mcbsp1-mux-fck@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "mcbsp1_mux_fck";
clocks = <&core_96m_fck>, <&mcbsp_clks>;
- ti,bit-shift = <2>;
};
- mcbsp2_mux_fck: clock-mcbsp2-mux-fck {
+ mcbsp2_mux_fck: clock-mcbsp2-mux-fck@6 {
+ reg = <6>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "mcbsp2_mux_fck";
clocks = <&per_96m_fck>, <&mcbsp_clks>;
- ti,bit-shift = <6>;
};
};
@@ -259,79 +262,81 @@
compatible = "ti,clksel";
reg = <0x1140>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- dpll3_m3_ck: clock-dpll3-m3 {
+ dpll3_m3_ck: clock-dpll3-m3@16 {
+ reg = <16>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "dpll3_m3_ck";
clocks = <&dpll3_ck>;
- ti,bit-shift = <16>;
ti,max-div = <31>;
ti,index-starts-at-one;
};
- dpll4_m6_ck: clock-dpll4-m6 {
+ dpll4_m6_ck: clock-dpll4-m6@24 {
+ reg = <24>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "dpll4_m6_ck";
clocks = <&dpll4_ck>;
- ti,bit-shift = <24>;
ti,max-div = <63>;
ti,index-starts-at-one;
};
- emu_src_mux_ck: clock-emu-src-mux {
+ emu_src_mux_ck: clock-emu-src-mux@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,mux-clock";
clock-output-names = "emu_src_mux_ck";
clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
};
- pclk_fck: clock-pclk-fck {
+ pclk_fck: clock-pclk-fck@8 {
+ reg = <8>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "pclk_fck";
clocks = <&emu_src_ck>;
- ti,bit-shift = <8>;
ti,max-div = <7>;
ti,index-starts-at-one;
};
- pclkx2_fck: clock-pclkx2-fck {
+ pclkx2_fck: clock-pclkx2-fck@6 {
+ reg = <6>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "pclkx2_fck";
clocks = <&emu_src_ck>;
- ti,bit-shift = <6>;
ti,max-div = <3>;
ti,index-starts-at-one;
};
- atclk_fck: clock-atclk-fck {
+ atclk_fck: clock-atclk-fck@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "atclk_fck";
clocks = <&emu_src_ck>;
- ti,bit-shift = <4>;
ti,max-div = <3>;
ti,index-starts-at-one;
};
- traceclk_src_fck: clock-traceclk-src-fck {
+ traceclk_src_fck: clock-traceclk-src-fck@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,mux-clock";
clock-output-names = "traceclk_src_fck";
clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
- ti,bit-shift = <2>;
};
- traceclk_fck: clock-traceclk-fck {
+ traceclk_fck: clock-traceclk-fck@11 {
+ reg = <11>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "traceclk_fck";
clocks = <&traceclk_src_fck>;
- ti,bit-shift = <11>;
ti,max-div = <7>;
ti,index-starts-at-one;
};
@@ -429,40 +434,41 @@
compatible = "ti,clksel";
reg = <0xd40>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- dpll3_m2_ck: clock-dpll3-m2 {
+ dpll3_m2_ck: clock-dpll3-m2@27 {
+ reg = <27>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "dpll3_m2_ck";
clocks = <&dpll3_ck>;
- ti,bit-shift = <27>;
ti,max-div = <31>;
ti,index-starts-at-one;
};
- omap_96m_fck: clock-omap-96m-fck {
+ omap_96m_fck: clock-omap-96m-fck@6 {
+ reg = <6>;
#clock-cells = <0>;
compatible = "ti,mux-clock";
clock-output-names = "omap_96m_fck";
clocks = <&cm_96m_fck>, <&sys_ck>;
- ti,bit-shift = <6>;
};
- omap_54m_fck: clock-omap-54m-fck {
+ omap_54m_fck: clock-omap-54m-fck@5 {
+ reg = <5>;
#clock-cells = <0>;
compatible = "ti,mux-clock";
clock-output-names = "omap_54m_fck";
clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
- ti,bit-shift = <5>;
};
- omap_48m_fck: clock-omap-48m-fck {
+ omap_48m_fck: clock-omap-48m-fck@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,mux-clock";
clock-output-names = "omap_48m_fck";
clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
- ti,bit-shift = <3>;
};
};
@@ -471,19 +477,21 @@
compatible = "ti,clksel";
reg = <0xe40>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- dpll4_m3_ck: clock-dpll4-m3 {
+ dpll4_m3_ck: clock-dpll4-m3@8 {
+ reg = <8>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "dpll4_m3_ck";
clocks = <&dpll4_ck>;
- ti,bit-shift = <8>;
ti,max-div = <32>;
ti,index-starts-at-one;
};
- dpll4_m4_ck: clock-dpll4-m4 {
+ dpll4_m4_ck: clock-dpll4-m4@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "dpll4_m4_ck";
@@ -603,29 +611,31 @@
compatible = "ti,clksel";
reg = <0xd70>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- clkout2_src_gate_ck: clock-clkout2-src-gate {
+ clkout2_src_gate_ck: clock-clkout2-src-gate@7 {
+ reg = <7>;
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
clock-output-names = "clkout2_src_gate_ck";
clocks = <&core_ck>;
- ti,bit-shift = <7>;
};
- clkout2_src_mux_ck: clock-clkout2-src-mux {
+ clkout2_src_mux_ck: clock-clkout2-src-mux@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "clkout2_src_mux_ck";
clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
};
- sys_clkout2: clock-sys-clkout2 {
+ sys_clkout2: clock-sys-clkout2@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "sys_clkout2";
clocks = <&clkout2_src_ck>;
- ti,bit-shift = <3>;
ti,max-div = <64>;
ti,index-power-of-two;
};
@@ -666,9 +676,11 @@
compatible = "ti,clksel";
reg = <0xa40>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- l3_ick: clock-l3-ick {
+ l3_ick: clock-l3-ick@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "l3_ick";
@@ -677,30 +689,30 @@
ti,index-starts-at-one;
};
- l4_ick: clock-l4-ick {
+ l4_ick: clock-l4-ick@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "l4_ick";
clocks = <&l3_ick>;
- ti,bit-shift = <2>;
ti,max-div = <3>;
ti,index-starts-at-one;
};
- gpt10_mux_fck: clock-gpt10-mux-fck {
+ gpt10_mux_fck: clock-gpt10-mux-fck@6 {
+ reg = <6>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt10_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <6>;
};
- gpt11_mux_fck: clock-gpt11-mux-fck {
+ gpt11_mux_fck: clock-gpt11-mux-fck@7 {
+ reg = <7>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt11_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <7>;
};
};
@@ -709,19 +721,21 @@
compatible = "ti,clksel";
reg = <0xc40>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- rm_ick: clock-rm-ick {
+ rm_ick: clock-rm-ick@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,divider-clock";
clock-output-names = "rm_ick";
clocks = <&l4_ick>;
- ti,bit-shift = <1>;
ti,max-div = <3>;
ti,index-starts-at-one;
};
- gpt1_mux_fck: clock-gpt1-mux-fck {
+ gpt1_mux_fck: clock-gpt1-mux-fck@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt1_mux_fck";
@@ -734,134 +748,135 @@
compatible = "ti,clksel";
reg = <0xa00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- gpt10_gate_fck: clock-gpt10-gate-fck {
+ gpt10_gate_fck: clock-gpt10-gate-fck@11 {
+ reg = <11>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt10_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <11>;
};
- gpt11_gate_fck: clock-gpt11-gate-fck {
+ gpt11_gate_fck: clock-gpt11-gate-fck@12 {
+ reg = <12>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt11_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <12>;
};
- mmchs2_fck: clock-mmchs2-fck {
+ mmchs2_fck: clock-mmchs2-fck@25 {
+ reg = <25>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "mmchs2_fck";
clocks = <&core_96m_fck>;
- ti,bit-shift = <25>;
};
- mmchs1_fck: clock-mmchs1-fck {
+ mmchs1_fck: clock-mmchs1-fck@24 {
+ reg = <24>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "mmchs1_fck";
clocks = <&core_96m_fck>;
- ti,bit-shift = <24>;
};
- i2c3_fck: clock-i2c3-fck {
+ i2c3_fck: clock-i2c3-fck@17 {
+ reg = <17>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "i2c3_fck";
clocks = <&core_96m_fck>;
- ti,bit-shift = <17>;
};
- i2c2_fck: clock-i2c2-fck {
+ i2c2_fck: clock-i2c2-fck@16 {
+ reg = <16>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "i2c2_fck";
clocks = <&core_96m_fck>;
- ti,bit-shift = <16>;
};
- i2c1_fck: clock-i2c1-fck {
+ i2c1_fck: clock-i2c1-fck@15 {
+ reg = <15>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "i2c1_fck";
clocks = <&core_96m_fck>;
- ti,bit-shift = <15>;
};
- mcbsp5_gate_fck: clock-mcbsp5-gate-fck {
+ mcbsp5_gate_fck: clock-mcbsp5-gate-fck@10 {
+ reg = <10>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "mcbsp5_gate_fck";
clocks = <&mcbsp_clks>;
- ti,bit-shift = <10>;
};
- mcbsp1_gate_fck: clock-mcbsp1-gate-fck {
+ mcbsp1_gate_fck: clock-mcbsp1-gate-fck@9 {
+ reg = <9>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "mcbsp1_gate_fck";
clocks = <&mcbsp_clks>;
- ti,bit-shift = <9>;
};
- mcspi4_fck: clock-mcspi4-fck {
+ mcspi4_fck: clock-mcspi4-fck@21 {
+ reg = <21>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "mcspi4_fck";
clocks = <&core_48m_fck>;
- ti,bit-shift = <21>;
};
- mcspi3_fck: clock-mcspi3-fck {
+ mcspi3_fck: clock-mcspi3-fck@20 {
+ reg = <20>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "mcspi3_fck";
clocks = <&core_48m_fck>;
- ti,bit-shift = <20>;
};
- mcspi2_fck: clock-mcspi2-fck {
+ mcspi2_fck: clock-mcspi2-fck@19 {
+ reg = <19>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "mcspi2_fck";
clocks = <&core_48m_fck>;
- ti,bit-shift = <19>;
};
- mcspi1_fck: clock-mcspi1-fck {
+ mcspi1_fck: clock-mcspi1-fck@18 {
+ reg = <18>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "mcspi1_fck";
clocks = <&core_48m_fck>;
- ti,bit-shift = <18>;
};
- uart2_fck: clock-uart2-fck {
+ uart2_fck: clock-uart2-fck@14 {
+ reg = <14>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "uart2_fck";
clocks = <&core_48m_fck>;
- ti,bit-shift = <14>;
};
- uart1_fck: clock-uart1-fck {
+ uart1_fck: clock-uart1-fck@13 {
+ reg = <13>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "uart1_fck";
clocks = <&core_48m_fck>;
- ti,bit-shift = <13>;
};
- hdq_fck: clock-hdq-fck {
+ hdq_fck: clock-hdq-fck@22 {
+ reg = <22>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "hdq_fck";
clocks = <&core_12m_fck>;
- ti,bit-shift = <22>;
};
};
@@ -914,166 +929,167 @@
compatible = "ti,clksel";
reg = <0xa10>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- sdrc_ick: clock-sdrc-ick {
+ sdrc_ick: clock-sdrc-ick@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "sdrc_ick";
clocks = <&core_l3_ick>;
- ti,bit-shift = <1>;
};
- mmchs2_ick: clock-mmchs2-ick {
+ mmchs2_ick: clock-mmchs2-ick@25 {
+ reg = <25>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mmchs2_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <25>;
};
- mmchs1_ick: clock-mmchs1-ick {
+ mmchs1_ick: clock-mmchs1-ick@24 {
+ reg = <24>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mmchs1_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <24>;
};
- hdq_ick: clock-hdq-ick {
+ hdq_ick: clock-hdq-ick@22 {
+ reg = <22>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "hdq_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <22>;
};
- mcspi4_ick: clock-mcspi4-ick {
+ mcspi4_ick: clock-mcspi4-ick@21 {
+ reg = <21>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mcspi4_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <21>;
};
- mcspi3_ick: clock-mcspi3-ick {
+ mcspi3_ick: clock-mcspi3-ick@20 {
+ reg = <20>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mcspi3_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <20>;
};
- mcspi2_ick: clock-mcspi2-ick {
+ mcspi2_ick: clock-mcspi2-ick@19 {
+ reg = <19>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mcspi2_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <19>;
};
- mcspi1_ick: clock-mcspi1-ick {
+ mcspi1_ick: clock-mcspi1-ick@18 {
+ reg = <18>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mcspi1_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <18>;
};
- i2c3_ick: clock-i2c3-ick {
+ i2c3_ick: clock-i2c3-ick@17 {
+ reg = <17>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "i2c3_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <17>;
};
- i2c2_ick: clock-i2c2-ick {
+ i2c2_ick: clock-i2c2-ick@16 {
+ reg = <16>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "i2c2_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <16>;
};
- i2c1_ick: clock-i2c1-ick {
+ i2c1_ick: clock-i2c1-ick@15 {
+ reg = <15>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "i2c1_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <15>;
};
- uart2_ick: clock-uart2-ick {
+ uart2_ick: clock-uart2-ick@14 {
+ reg = <14>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "uart2_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <14>;
};
- uart1_ick: clock-uart1-ick {
+ uart1_ick: clock-uart1-ick@13 {
+ reg = <13>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "uart1_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <13>;
};
- gpt11_ick: clock-gpt11-ick {
+ gpt11_ick: clock-gpt11-ick@12 {
+ reg = <12>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt11_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <12>;
};
- gpt10_ick: clock-gpt10-ick {
+ gpt10_ick: clock-gpt10-ick@11 {
+ reg = <11>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt10_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <11>;
};
- mcbsp5_ick: clock-mcbsp5-ick {
+ mcbsp5_ick: clock-mcbsp5-ick@10 {
+ reg = <10>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mcbsp5_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <10>;
};
- mcbsp1_ick: clock-mcbsp1-ick {
+ mcbsp1_ick: clock-mcbsp1-ick@9 {
+ reg = <9>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mcbsp1_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <9>;
};
- omapctrl_ick: clock-omapctrl-ick {
+ omapctrl_ick: clock-omapctrl-ick@6 {
+ reg = <6>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "omapctrl_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <6>;
};
- aes2_ick: clock-aes2-ick {
+ aes2_ick: clock-aes2-ick@28 {
+ reg = <28>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "aes2_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <28>;
};
- sha12_ick: clock-sha12-ick {
+ sha12_ick: clock-sha12-ick@27 {
+ reg = <27>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "sha12_ick";
clocks = <&core_l4_ick>;
- ti,bit-shift = <27>;
};
};
@@ -1136,30 +1152,31 @@
compatible = "ti,clksel";
reg = <0xc00>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- gpt1_gate_fck: clock-gpt1-gate-fck {
+ gpt1_gate_fck: clock-gpt1-gate-fck@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt1_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <0>;
};
- gpio1_dbck: clock-gpio1-dbck {
+ gpio1_dbck: clock-gpio1-dbck@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "gpio1_dbck";
clocks = <&wkup_32k_fck>;
- ti,bit-shift = <3>;
};
- wdt2_fck: clock-wdt2-fck {
+ wdt2_fck: clock-wdt2-fck@5 {
+ reg = <5>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "wdt2_fck";
clocks = <&wkup_32k_fck>;
- ti,bit-shift = <5>;
};
};
@@ -1182,54 +1199,55 @@
compatible = "ti,clksel";
reg = <0xc10>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- wdt2_ick: clock-wdt2-ick {
+ wdt2_ick: clock-wdt2-ick@5 {
+ reg = <5>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "wdt2_ick";
clocks = <&wkup_l4_ick>;
- ti,bit-shift = <5>;
};
- wdt1_ick: clock-wdt1-ick {
+ wdt1_ick: clock-wdt1-ick@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "wdt1_ick";
clocks = <&wkup_l4_ick>;
- ti,bit-shift = <4>;
};
- gpio1_ick: clock-gpio1-ick {
+ gpio1_ick: clock-gpio1-ick@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpio1_ick";
clocks = <&wkup_l4_ick>;
- ti,bit-shift = <3>;
};
- omap_32ksync_ick: clock-omap-32ksync-ick {
+ omap_32ksync_ick: clock-omap-32ksync-ick@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "omap_32ksync_ick";
clocks = <&wkup_l4_ick>;
- ti,bit-shift = <2>;
};
- gpt12_ick: clock-gpt12-ick {
+ gpt12_ick: clock-gpt12-ick@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt12_ick";
clocks = <&wkup_l4_ick>;
- ti,bit-shift = <1>;
};
- gpt1_ick: clock-gpt1-ick {
+ gpt1_ick: clock-gpt1-ick@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt1_ick";
clocks = <&wkup_l4_ick>;
- ti,bit-shift = <0>;
};
};
@@ -1254,150 +1272,151 @@
compatible = "ti,clksel";
reg = <0x1000>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- uart3_fck: clock-uart3-fck {
+ uart3_fck: clock-uart3-fck@11 {
+ reg = <11>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "uart3_fck";
clocks = <&per_48m_fck>;
- ti,bit-shift = <11>;
};
- gpt2_gate_fck: clock-gpt2-gate-fck {
+ gpt2_gate_fck: clock-gpt2-gate-fck@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt2_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <3>;
};
- gpt3_gate_fck: clock-gpt3-gate-fck {
+ gpt3_gate_fck: clock-gpt3-gate-fck@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt3_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <4>;
};
- gpt4_gate_fck: clock-gpt4-gate-fck {
+ gpt4_gate_fck: clock-gpt4-gate-fck@5 {
+ reg = <5>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt4_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <5>;
};
- gpt5_gate_fck: clock-gpt5-gate-fck {
+ gpt5_gate_fck: clock-gpt5-gate-fck@6 {
+ reg = <6>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt5_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <6>;
};
- gpt6_gate_fck: clock-gpt6-gate-fck {
+ gpt6_gate_fck: clock-gpt6-gate-fck@7 {
+ reg = <7>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt6_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <7>;
};
- gpt7_gate_fck: clock-gpt7-gate-fck {
+ gpt7_gate_fck: clock-gpt7-gate-fck@8 {
+ reg = <8>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt7_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <8>;
};
- gpt8_gate_fck: clock-gpt8-gate-fck {
+ gpt8_gate_fck: clock-gpt8-gate-fck@9 {
+ reg = <9>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt8_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <9>;
};
- gpt9_gate_fck: clock-gpt9-gate-fck {
+ gpt9_gate_fck: clock-gpt9-gate-fck@10 {
+ reg = <10>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "gpt9_gate_fck";
clocks = <&sys_ck>;
- ti,bit-shift = <10>;
};
- gpio6_dbck: clock-gpio6-dbck {
+ gpio6_dbck: clock-gpio6-dbck@17 {
+ reg = <17>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "gpio6_dbck";
clocks = <&per_32k_alwon_fck>;
- ti,bit-shift = <17>;
};
- gpio5_dbck: clock-gpio5-dbck {
+ gpio5_dbck: clock-gpio5-dbck@16 {
+ reg = <16>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "gpio5_dbck";
clocks = <&per_32k_alwon_fck>;
- ti,bit-shift = <16>;
};
- gpio4_dbck: clock-gpio4-dbck {
+ gpio4_dbck: clock-gpio4-dbck@15 {
+ reg = <15>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "gpio4_dbck";
clocks = <&per_32k_alwon_fck>;
- ti,bit-shift = <15>;
};
- gpio3_dbck: clock-gpio3-dbck {
+ gpio3_dbck: clock-gpio3-dbck@14 {
+ reg = <14>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "gpio3_dbck";
clocks = <&per_32k_alwon_fck>;
- ti,bit-shift = <14>;
};
- gpio2_dbck: clock-gpio2-dbck {
+ gpio2_dbck: clock-gpio2-dbck@13 {
+ reg = <13>;
#clock-cells = <0>;
compatible = "ti,gate-clock";
clock-output-names = "gpio2_dbck";
clocks = <&per_32k_alwon_fck>;
- ti,bit-shift = <13>;
};
- wdt3_fck: clock-wdt3-fck {
+ wdt3_fck: clock-wdt3-fck@12 {
+ reg = <12>;
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clock-output-names = "wdt3_fck";
clocks = <&per_32k_alwon_fck>;
- ti,bit-shift = <12>;
};
- mcbsp2_gate_fck: clock-mcbsp2-gate-fck {
+ mcbsp2_gate_fck: clock-mcbsp2-gate-fck@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "mcbsp2_gate_fck";
clocks = <&mcbsp_clks>;
- ti,bit-shift = <0>;
};
- mcbsp3_gate_fck: clock-mcbsp3-gate-fck {
+ mcbsp3_gate_fck: clock-mcbsp3-gate-fck@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "mcbsp3_gate_fck";
clocks = <&mcbsp_clks>;
- ti,bit-shift = <1>;
};
- mcbsp4_gate_fck: clock-mcbsp4-gate-fck {
+ mcbsp4_gate_fck: clock-mcbsp4-gate-fck@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,composite-gate-clock";
clock-output-names = "mcbsp4_gate_fck";
clocks = <&mcbsp_clks>;
- ti,bit-shift = <2>;
};
};
@@ -1406,69 +1425,71 @@
compatible = "ti,clksel";
reg = <0x1040>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- gpt2_mux_fck: clock-gpt2-mux-fck {
+ gpt2_mux_fck: clock-gpt2-mux-fck@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt2_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
};
- gpt3_mux_fck: clock-gpt3-mux-fck {
+ gpt3_mux_fck: clock-gpt3-mux-fck@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt3_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <1>;
};
- gpt4_mux_fck: clock-gpt4-mux-fck {
+ gpt4_mux_fck: clock-gpt4-mux-fck@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt4_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <2>;
};
- gpt5_mux_fck: clock-gpt5-mux-fck {
+ gpt5_mux_fck: clock-gpt5-mux-fck@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt5_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <3>;
};
- gpt6_mux_fck: clock-gpt6-mux-fck {
+ gpt6_mux_fck: clock-gpt6-mux-fck@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt6_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <4>;
};
- gpt7_mux_fck: clock-gpt7-mux-fck {
+ gpt7_mux_fck: clock-gpt7-mux-fck@5 {
+ reg = <5>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt7_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <5>;
};
- gpt8_mux_fck: clock-gpt8-mux-fck {
+ gpt8_mux_fck: clock-gpt8-mux-fck@6 {
+ reg = <6>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt8_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <6>;
};
- gpt9_mux_fck: clock-gpt9-mux-fck {
+ gpt9_mux_fck: clock-gpt9-mux-fck@7 {
+ reg = <7>;
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clock-output-names = "gpt9_mux_fck";
clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <7>;
};
};
@@ -1541,158 +1562,159 @@
compatible = "ti,clksel";
reg = <0x1010>;
#clock-cells = <2>;
- #address-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- gpio6_ick: clock-gpio6-ick {
+ gpio6_ick: clock-gpio6-ick@17 {
+ reg = <17>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpio6_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <17>;
};
- gpio5_ick: clock-gpio5-ick {
+ gpio5_ick: clock-gpio5-ick@16 {
+ reg = <16>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpio5_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <16>;
};
- gpio4_ick: clock-gpio4-ick {
+ gpio4_ick: clock-gpio4-ick@15 {
+ reg = <15>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpio4_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <15>;
};
- gpio3_ick: clock-gpio3-ick {
+ gpio3_ick: clock-gpio3-ick@14 {
+ reg = <14>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpio3_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <14>;
};
- gpio2_ick: clock-gpio2-ick {
+ gpio2_ick: clock-gpio2-ick@13 {
+ reg = <13>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpio2_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <13>;
};
- wdt3_ick: clock-wdt3-ick {
+ wdt3_ick: clock-wdt3-ick@12 {
+ reg = <12>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "wdt3_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <12>;
};
- uart3_ick: clock-uart3-ick {
+ uart3_ick: clock-uart3-ick@11 {
+ reg = <11>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "uart3_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <11>;
};
- uart4_ick: clock-uart4-ick {
+ uart4_ick: clock-uart4-ick@18 {
+ reg = <18>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "uart4_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <18>;
};
- gpt9_ick: clock-gpt9-ick {
+ gpt9_ick: clock-gpt9-ick@10 {
+ reg = <10>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt9_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <10>;
};
- gpt8_ick: clock-gpt8-ick {
+ gpt8_ick: clock-gpt8-ick@9 {
+ reg = <9>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt8_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <9>;
};
- gpt7_ick: clock-gpt7-ick {
+ gpt7_ick: clock-gpt7-ick@8 {
+ reg = <8>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt7_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <8>;
};
- gpt6_ick: clock-gpt6-ick {
+ gpt6_ick: clock-gpt6-ick@7 {
+ reg = <7>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt6_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <7>;
};
- gpt5_ick: clock-gpt5-ick {
+ gpt5_ick: clock-gpt5-ick@6 {
+ reg = <6>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt5_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <6>;
};
- gpt4_ick: clock-gpt4-ick {
+ gpt4_ick: clock-gpt4-ick@5 {
+ reg = <5>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt4_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <5>;
};
- gpt3_ick: clock-gpt3-ick {
+ gpt3_ick: clock-gpt3-ick@4 {
+ reg = <4>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt3_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <4>;
};
- gpt2_ick: clock-gpt2-ick {
+ gpt2_ick: clock-gpt2-ick@3 {
+ reg = <3>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "gpt2_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <3>;
};
- mcbsp2_ick: clock-mcbsp2-ick {
+ mcbsp2_ick: clock-mcbsp2-ick@0 {
+ reg = <0>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mcbsp2_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <0>;
};
- mcbsp3_ick: clock-mcbsp3-ick {
+ mcbsp3_ick: clock-mcbsp3-ick@1 {
+ reg = <1>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mcbsp3_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <1>;
};
- mcbsp4_ick: clock-mcbsp4-ick {
+ mcbsp4_ick: clock-mcbsp4-ick@2 {
+ reg = <2>;
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clock-output-names = "mcbsp4_ick";
clocks = <&per_l4_ick>;
- ti,bit-shift = <2>;
};
};
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index f6175e6..3f7d687 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -27,6 +27,7 @@
#define UARTA_72165 UARTA_7278
#define UARTA_7364 REG_PHYS_ADDR(0x40b000)
#define UARTA_7366 UARTA_7364
+#define UARTA_74165 UARTA_7278
#define UARTA_74371 REG_PHYS_ADDR(0x406b00)
#define UARTA_7439 REG_PHYS_ADDR(0x40a900)
#define UARTA_7445 REG_PHYS_ADDR(0x40ab00)
@@ -88,9 +89,10 @@
30: checkuart(\rp, \rv, 0x72780000, 7278)
31: checkuart(\rp, \rv, 0x73640000, 7364)
32: checkuart(\rp, \rv, 0x73660000, 7366)
-33: checkuart(\rp, \rv, 0x07437100, 74371)
-34: checkuart(\rp, \rv, 0x74390000, 7439)
-35: checkuart(\rp, \rv, 0x74450000, 7445)
+33: checkuart(\rp, \rv, 0x07416500, 74165)
+34: checkuart(\rp, \rv, 0x07437100, 74371)
+35: checkuart(\rp, \rv, 0x74390000, 7439)
+36: checkuart(\rp, \rv, 0x74450000, 7445)
/* No valid UART found */
90: mov \rp, #0
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 8789d93..7318d87 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -93,7 +93,6 @@
select ARM_ERRATA_775420
select ARM_GIC
select GPIO_BCM_KONA
- select TICK_ONESHOT
select HAVE_ARM_ARCH_TIMER
select PINCTRL
select ARCH_BCM_MOBILE_SMP if SMP
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
index 52f928d..2a0d4ee 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
@@ -185,16 +185,17 @@
#size-cells = <1>;
partition@0 {
- compatible = "nvmem-cells";
label = "cferom";
reg = <0x0 0x100000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x0 0x100000>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
- base_mac_addr: mac@106a0 {
- reg = <0x106a0 0x6>;
+ base_mac_addr: mac@106a0 {
+ reg = <0x106a0 0x6>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index 336016e..e01cf4f 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -227,9 +227,6 @@
brcm,num-gphy = <5>;
brcm,num-rgmii-ports = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
ports: ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 59fd2d4..9883ca3 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -243,7 +243,7 @@
};
pdma: dma-controller@3000000 {
- compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+ compatible = "microchip,mpfs-pdma", "sifive,pdma0";
reg = <0x0 0x3000000 0x0 0x8000>;
interrupt-parent = <&plic>;
interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
@@ -422,7 +422,7 @@
can0: can@2010c000 {
compatible = "microchip,mpfs-can";
reg = <0x0 0x2010c000 0x0 0x1000>;
- clocks = <&clkcfg CLK_CAN0>;
+ clocks = <&clkcfg CLK_CAN0>, <&clkcfg CLK_MSSPLL3>;
interrupt-parent = <&plic>;
interrupts = <56>;
status = "disabled";
@@ -431,7 +431,7 @@
can1: can@2010d000 {
compatible = "microchip,mpfs-can";
reg = <0x0 0x2010d000 0x0 0x1000>;
- clocks = <&clkcfg CLK_CAN1>;
+ clocks = <&clkcfg CLK_CAN1>, <&clkcfg CLK_MSSPLL3>;
interrupt-parent = <&plic>;
interrupts = <57>;
status = "disabled";
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
index 7cda3a8..168f5d9 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -11,3 +11,14 @@
model = "BeagleV Starlight Beta";
compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
};
+
+&gmac {
+ phy-handle = <&phy>;
+};
+
+&mdio {
+ phy: ethernet-phy@7 {
+ reg = <7>;
+ reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index 42fb61c3..ae1a6ae 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -72,7 +72,91 @@
};
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+};
+
&gpio {
+ gmac_pins: gmac-0 {
+ gtxclk-pins {
+ pins = <PAD_FUNC_SHARE(115)>;
+ bias-pull-up;
+ drive-strength = <35>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ miitxclk-pins {
+ pins = <PAD_FUNC_SHARE(116)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ tx-pins {
+ pins = <PAD_FUNC_SHARE(117)>,
+ <PAD_FUNC_SHARE(119)>,
+ <PAD_FUNC_SHARE(120)>,
+ <PAD_FUNC_SHARE(121)>,
+ <PAD_FUNC_SHARE(122)>,
+ <PAD_FUNC_SHARE(123)>,
+ <PAD_FUNC_SHARE(124)>,
+ <PAD_FUNC_SHARE(125)>,
+ <PAD_FUNC_SHARE(126)>;
+ bias-pull-up;
+ drive-strength = <35>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ rxclk-pins {
+ pins = <PAD_FUNC_SHARE(127)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <6>;
+ };
+ rxer-pins {
+ pins = <PAD_FUNC_SHARE(129)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ rx-pins {
+ pins = <PAD_FUNC_SHARE(128)>,
+ <PAD_FUNC_SHARE(130)>,
+ <PAD_FUNC_SHARE(131)>,
+ <PAD_FUNC_SHARE(132)>,
+ <PAD_FUNC_SHARE(133)>,
+ <PAD_FUNC_SHARE(134)>,
+ <PAD_FUNC_SHARE(135)>,
+ <PAD_FUNC_SHARE(136)>,
+ <PAD_FUNC_SHARE(137)>,
+ <PAD_FUNC_SHARE(138)>,
+ <PAD_FUNC_SHARE(139)>,
+ <PAD_FUNC_SHARE(140)>,
+ <PAD_FUNC_SHARE(141)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+
i2c0_pins: i2c0-0 {
i2c-pins {
pinmux = <GPIOMUX(62, GPO_LOW,
@@ -115,6 +199,24 @@
};
};
+ pwm_pins: pwm-0 {
+ pwm-pins {
+ pinmux = <GPIOMUX(7,
+ GPO_PWM_PAD_OUT_BIT0,
+ GPO_PWM_PAD_OE_N_BIT0,
+ GPI_NONE)>,
+ <GPIOMUX(5,
+ GPO_PWM_PAD_OUT_BIT1,
+ GPO_PWM_PAD_OE_N_BIT1,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <35>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
sdio0_pins: sdio0-0 {
clk-pins {
pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT,
@@ -257,6 +359,12 @@
clock-frequency = <27000000>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
&sdio0 {
broken-cd;
bus-width = <4>;
diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
index e82af72..692c696 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
@@ -6,7 +6,6 @@
/dts-v1/;
#include "jh7100-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
/ {
model = "StarFive VisionFive V1";
@@ -18,3 +17,24 @@
priority = <224>;
};
};
+
+&gmac {
+ phy-handle = <&phy>;
+};
+
+/*
+ * The board uses a Motorcomm YT8521 PHY supporting RGMII-ID, but requires
+ * manual adjustment of the RX internal delay to work properly. The default
+ * RX delay provided by the driver (1.95ns) is too high, but applying a 50%
+ * reduction seems to mitigate the issue.
+ *
+ * It is worth noting the adjustment is not necessary on BeagleV Starlight SBC,
+ * which uses a Microchip PHY. Hence, most likely the Motorcomm PHY is the one
+ * responsible for the misbehaviour, not the GMAC.
+ */
+&mdio {
+ phy: ethernet-phy@0 {
+ reg = <0>;
+ rx-internal-delay-ps = <900>;
+ };
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index 5d499d8..9a2e958 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -208,6 +208,37 @@
status = "disabled";
};
+ gmac: ethernet@10020000 {
+ compatible = "starfive,jh7100-dwmac", "snps,dwmac";
+ reg = <0x0 0x10020000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>,
+ <&clkgen JH7100_CLK_GMAC_AHB>,
+ <&clkgen JH7100_CLK_GMAC_PTP_REF>,
+ <&clkgen JH7100_CLK_GMAC_TX_INV>,
+ <&clkgen JH7100_CLK_GMAC_GTX>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx";
+ resets = <&rstgen JH7100_RSTN_GMAC_AHB>;
+ reset-names = "ahb";
+ interrupts = <6>, <7>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ max-frame-size = <9000>;
+ snps,multicast-filter-bins = <32>;
+ snps,perfect-filter-entries = <128>;
+ starfive,syscon = <&sysmain 0x70 0>;
+ rx-fifo-depth = <32768>;
+ tx-fifo-depth = <16384>;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,fixed-burst;
+ snps,force_thresh_dma_mode;
+ status = "disabled";
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <16>;
+ snps,rd_osr_lmt = <16>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+ };
+
clkgen: clock-controller@11800000 {
compatible = "starfive,jh7100-clkgen";
reg = <0x0 0x11800000 0x0 0x10000>;
@@ -222,6 +253,11 @@
#reset-cells = <1>;
};
+ sysmain: syscon@11850000 {
+ compatible = "starfive,jh7100-sysmain", "syscon";
+ reg = <0x0 0x11850000 0x0 0x10000>;
+ };
+
i2c0: i2c@118b0000 {
compatible = "snps,designware-i2c";
reg = <0x0 0x118b0000 0x0 0x10000>;
@@ -324,6 +360,15 @@
<&rstgen JH7100_RSTN_WDT>;
};
+ pwm: pwm@12490000 {
+ compatible = "starfive,jh7100-pwm", "opencores,pwm-v1";
+ reg = <0x0 0x12490000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_PWM_APB>;
+ resets = <&rstgen JH7100_RSTN_PWM_APB>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sfctemp: temperature-sensor@124a0000 {
compatible = "starfive,jh7100-temp";
reg = <0x0 0x124a0000 0x0 0x10000>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index b89e979..45b58b6 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -125,6 +125,55 @@
clock-frequency = <49152000>;
};
+&camss {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+ <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
+ assigned-clock-rates = <49500000>, <198000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ camss_from_csi2rx: endpoint {
+ remote-endpoint = <&csi2rx_to_camss>;
+ };
+ };
+ };
+};
+
+&csi2rx {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
+ assigned-clock-rates = <297000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ /* remote MIPI sensor endpoint */
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi2rx_to_camss: endpoint {
+ remote-endpoint = <&camss_from_csi2rx>;
+ };
+ };
+ };
+};
+
&gmac0 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
@@ -323,6 +372,12 @@
};
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
@@ -513,6 +568,22 @@
};
};
+ pwm_pins: pwm-0 {
+ pwm-pins {
+ pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
+ GPOEN_SYS_PWM0_CHANNEL0,
+ GPI_NONE)>,
+ <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
+ GPOEN_SYS_PWM0_CHANNEL1,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
spi0_pins: spi0-0 {
mosi-pins {
pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 74ed3b9..4a5708f 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -829,6 +829,15 @@
status = "disabled";
};
+ pwm: pwm@120d0000 {
+ compatible = "starfive,jh7110-pwm", "opencores,pwm-v1";
+ reg = <0x0 0x120d0000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_PWM_APB>;
+ resets = <&syscrg JH7110_SYSRST_PWM_APB>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sfctemp: temperature-sensor@120e0000 {
compatible = "starfive,jh7110-temp";
reg = <0x0 0x120e0000 0x0 0x10000>;
@@ -1104,6 +1113,32 @@
#power-domain-cells = <1>;
};
+ csi2rx: csi@19800000 {
+ compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx";
+ reg = <0x0 0x19800000 0x0 0x10000>;
+ clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>,
+ <&ispcrg JH7110_ISPCLK_VIN_APB>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF0>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF1>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF2>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF3>;
+ clock-names = "sys_clk", "p_clk",
+ "pixel_if0_clk", "pixel_if1_clk",
+ "pixel_if2_clk", "pixel_if3_clk";
+ resets = <&ispcrg JH7110_ISPRST_VIN_SYS>,
+ <&ispcrg JH7110_ISPRST_VIN_APB>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF0>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF1>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF2>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF3>;
+ reset-names = "sys", "reg_bank",
+ "pixel_if0", "pixel_if1",
+ "pixel_if2", "pixel_if3";
+ phys = <&csi_phy>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
ispcrg: clock-controller@19810000 {
compatible = "starfive,jh7110-ispcrg";
reg = <0x0 0x19810000 0x0 0x10000>;
@@ -1121,6 +1156,47 @@
power-domains = <&pwrc JH7110_PD_ISP>;
};
+ csi_phy: phy@19820000 {
+ compatible = "starfive,jh7110-dphy-rx";
+ reg = <0x0 0x19820000 0x0 0x10000>;
+ clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFG_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_REF_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0>;
+ clock-names = "cfg", "ref", "tx";
+ resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>,
+ <&ispcrg JH7110_ISPRST_M31DPHY_B09_AON>;
+ power-domains = <&aon_syscon JH7110_AON_PD_DPHY_RX>;
+ #phy-cells = <0>;
+ };
+
+ camss: isp@19840000 {
+ compatible = "starfive,jh7110-camss";
+ reg = <0x0 0x19840000 0x0 0x10000>,
+ <0x0 0x19870000 0x0 0x30000>;
+ reg-names = "syscon", "isp";
+ clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+ <&ispcrg JH7110_ISPCLK_ISPV2_TOP_WRAPPER_C>,
+ <&ispcrg JH7110_ISPCLK_DVP_INV>,
+ <&ispcrg JH7110_ISPCLK_VIN_P_AXI_WR>,
+ <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>,
+ <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>,
+ <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>;
+ clock-names = "apb_func", "wrapper_clk_c", "dvp_inv",
+ "axiwr", "mipi_rx0_pxl", "ispcore_2x",
+ "isp_axi";
+ resets = <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_P>,
+ <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_C>,
+ <&ispcrg JH7110_ISPRST_VIN_P_AXI_RD>,
+ <&ispcrg JH7110_ISPRST_VIN_P_AXI_WR>,
+ <&syscrg JH7110_SYSRST_ISP_TOP>,
+ <&syscrg JH7110_SYSRST_ISP_TOP_AXI>;
+ reset-names = "wrapper_p", "wrapper_c", "axird",
+ "axiwr", "isp_top_n", "isp_top_axi";
+ power-domains = <&pwrc JH7110_PD_ISP>;
+ interrupts = <92>, <87>, <90>, <88>;
+ status = "disabled";
+ };
+
voutcrg: clock-controller@295c0000 {
compatible = "starfive,jh7110-voutcrg";
reg = <0x0 0x295c0000 0x0 0x10000>;
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index b6dfe43..65ae758 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -96,6 +96,20 @@
[ARB_ERR_CAP_MASTER] = 0x0d8,
};
+static const int gisb_offsets_bcm74165[] = {
+ [ARB_TIMER] = 0x008,
+ [ARB_BP_CAP_CLR] = 0x044,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x048,
+ [ARB_BP_CAP_STATUS] = 0x058,
+ [ARB_BP_CAP_MASTER] = 0x05c,
+ [ARB_ERR_CAP_CLR] = 0x038,
+ [ARB_ERR_CAP_HI_ADDR] = -1,
+ [ARB_ERR_CAP_ADDR] = 0x020,
+ [ARB_ERR_CAP_STATUS] = 0x030,
+ [ARB_ERR_CAP_MASTER] = 0x034,
+};
+
static const int gisb_offsets_bcm7435[] = {
[ARB_TIMER] = 0x00c,
[ARB_BP_CAP_CLR] = 0x014,
@@ -393,6 +407,7 @@
{ .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
{ .compatible = "brcm,bcm7278-gisb-arb", .data = gisb_offsets_bcm7278 },
{ .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
+ { .compatible = "brcm,bcm74165-gisb-arb", .data = gisb_offsets_bcm74165 },
{ },
};
diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index 4fa932c..baf22a8 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -39,45 +39,39 @@
/*
* request all gpios required by the bus.
*/
-static int ts_nbus_init_pdata(struct platform_device *pdev, struct ts_nbus
- *ts_nbus)
+static int ts_nbus_init_pdata(struct platform_device *pdev,
+ struct ts_nbus *ts_nbus)
{
ts_nbus->data = devm_gpiod_get_array(&pdev->dev, "ts,data",
GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->data)) {
- dev_err(&pdev->dev, "failed to retrieve ts,data-gpio from dts\n");
- return PTR_ERR(ts_nbus->data);
- }
+ if (IS_ERR(ts_nbus->data))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->data),
+ "failed to retrieve ts,data-gpio from dts\n");
ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->csn)) {
- dev_err(&pdev->dev, "failed to retrieve ts,csn-gpio from dts\n");
- return PTR_ERR(ts_nbus->csn);
- }
+ if (IS_ERR(ts_nbus->csn))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->csn),
+ "failed to retrieve ts,csn-gpio from dts\n");
ts_nbus->txrx = devm_gpiod_get(&pdev->dev, "ts,txrx", GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->txrx)) {
- dev_err(&pdev->dev, "failed to retrieve ts,txrx-gpio from dts\n");
- return PTR_ERR(ts_nbus->txrx);
- }
+ if (IS_ERR(ts_nbus->txrx))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->txrx),
+ "failed to retrieve ts,txrx-gpio from dts\n");
ts_nbus->strobe = devm_gpiod_get(&pdev->dev, "ts,strobe", GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->strobe)) {
- dev_err(&pdev->dev, "failed to retrieve ts,strobe-gpio from dts\n");
- return PTR_ERR(ts_nbus->strobe);
- }
+ if (IS_ERR(ts_nbus->strobe))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->strobe),
+ "failed to retrieve ts,strobe-gpio from dts\n");
ts_nbus->ale = devm_gpiod_get(&pdev->dev, "ts,ale", GPIOD_OUT_HIGH);
- if (IS_ERR(ts_nbus->ale)) {
- dev_err(&pdev->dev, "failed to retrieve ts,ale-gpio from dts\n");
- return PTR_ERR(ts_nbus->ale);
- }
+ if (IS_ERR(ts_nbus->ale))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->ale),
+ "failed to retrieve ts,ale-gpio from dts\n");
ts_nbus->rdy = devm_gpiod_get(&pdev->dev, "ts,rdy", GPIOD_IN);
- if (IS_ERR(ts_nbus->rdy)) {
- dev_err(&pdev->dev, "failed to retrieve ts,rdy-gpio from dts\n");
- return PTR_ERR(ts_nbus->rdy);
- }
+ if (IS_ERR(ts_nbus->rdy))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->rdy),
+ "failed to retrieve ts,rdy-gpio from dts\n");
return 0;
}
@@ -273,7 +267,7 @@
static int ts_nbus_probe(struct platform_device *pdev)
{
struct pwm_device *pwm;
- struct pwm_args pargs;
+ struct pwm_state state;
struct device *dev = &pdev->dev;
struct ts_nbus *ts_nbus;
int ret;
@@ -289,32 +283,24 @@
return ret;
pwm = devm_pwm_get(dev, NULL);
- if (IS_ERR(pwm)) {
- ret = PTR_ERR(pwm);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "unable to request PWM\n");
- return ret;
- }
+ if (IS_ERR(pwm))
+ return dev_err_probe(dev, PTR_ERR(pwm),
+ "unable to request PWM\n");
- pwm_get_args(pwm, &pargs);
- if (!pargs.period) {
- dev_err(&pdev->dev, "invalid PWM period\n");
- return -EINVAL;
- }
+ pwm_init_state(pwm, &state);
+ if (!state.period)
+ return dev_err_probe(dev, -EINVAL, "invalid PWM period\n");
- /*
- * FIXME: pwm_apply_args() should be removed when switching to
- * the atomic PWM API.
- */
- pwm_apply_args(pwm);
- ret = pwm_config(pwm, pargs.period, pargs.period);
+ state.duty_cycle = state.period;
+ state.enabled = true;
+
+ ret = pwm_apply_state(pwm, &state);
if (ret < 0)
- return ret;
+ return dev_err_probe(dev, ret, "failed to configure PWM\n");
/*
* we can now start the FPGA and populate the peripherals.
*/
- pwm_enable(pwm);
ts_nbus->pwm = pwm;
/*
@@ -324,7 +310,8 @@
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret < 0)
- return ret;
+ return dev_err_probe(dev, ret,
+ "failed to populate platform devices on bus\n");
dev_info(dev, "initialized\n");
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 9318328..43514e6 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -376,14 +376,9 @@
}
clk_hw->fixed_rate = val;
- if (of_property_read_u32(node, "ti,bit-shift", &val)) {
- pr_err("%pOFn missing bit-shift\n", node);
- goto cleanup;
- }
-
- clk_hw->enable_bit = val;
- ad->enable_mask = 0x3 << val;
- ad->autoidle_mask = 0x3 << val;
+ clk_hw->enable_bit = ti_clk_get_legacy_bit_shift(node);
+ ad->enable_mask = 0x3 << clk_hw->enable_bit;
+ ad->autoidle_mask = 0x3 << clk_hw->enable_bit;
if (of_property_read_u32(node, "ti,idlest-shift", &val)) {
pr_err("%pOFn missing idlest-shift\n", node);
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 1862958..f2117fe 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -7,6 +7,7 @@
* Tero Kristo <t-kristo@ti.com>
*/
+#include <linux/cleanup.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
@@ -15,6 +16,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/list.h>
+#include <linux/minmax.h>
#include <linux/regmap.h>
#include <linux/string_helpers.h>
#include <linux/memblock.h>
@@ -114,20 +116,26 @@
/*
* Eventually we could standardize to using '_' for clk-*.c files to follow the
- * TRM naming and leave out the tmp name here.
+ * TRM naming.
*/
static struct device_node *ti_find_clock_provider(struct device_node *from,
const char *name)
{
+ char *tmp __free(kfree) = NULL;
struct device_node *np;
bool found = false;
const char *n;
- char *tmp;
+ char *p;
tmp = kstrdup_and_replace(name, '-', '_', GFP_KERNEL);
if (!tmp)
return NULL;
+ /* Ignore a possible address for the node name */
+ p = strchr(tmp, '@');
+ if (p)
+ *p = '\0';
+
/* Node named "clock" with "clock-output-names" */
for_each_of_allnodes_from(from, np) {
if (of_property_read_string_index(np, "clock-output-names",
@@ -140,7 +148,6 @@
break;
}
}
- kfree(tmp);
if (found) {
of_node_put(from);
@@ -148,7 +155,7 @@
}
/* Fall back to using old node name base provider name */
- return of_find_node_by_name(from, name);
+ return of_find_node_by_name(from, tmp);
}
/**
@@ -301,8 +308,9 @@
int ti_clk_get_reg_addr(struct device_node *node, int index,
struct clk_omap_reg *reg)
{
- u32 val;
- int i;
+ u32 clksel_addr, val;
+ bool is_clksel = false;
+ int i, err;
for (i = 0; i < CLK_MAX_MEMMAPS; i++) {
if (clocks_node_ptr[i] == node->parent)
@@ -318,21 +326,62 @@
reg->index = i;
- if (of_property_read_u32_index(node, "reg", index, &val)) {
- if (of_property_read_u32_index(node->parent, "reg",
- index, &val)) {
- pr_err("%pOFn or parent must have reg[%d]!\n",
- node, index);
+ if (of_device_is_compatible(node->parent, "ti,clksel")) {
+ err = of_property_read_u32_index(node->parent, "reg", index, &clksel_addr);
+ if (err) {
+ pr_err("%pOFn parent clksel must have reg[%d]!\n", node, index);
return -EINVAL;
}
+ is_clksel = true;
}
+ err = of_property_read_u32_index(node, "reg", index, &val);
+ if (err && is_clksel) {
+ /* Legacy clksel with no reg and a possible ti,bit-shift property */
+ reg->offset = clksel_addr;
+ reg->bit = ti_clk_get_legacy_bit_shift(node);
+ reg->ptr = NULL;
+
+ return 0;
+ }
+
+ /* Updated clksel clock with a proper reg property */
+ if (is_clksel) {
+ reg->offset = clksel_addr;
+ reg->bit = val;
+ reg->ptr = NULL;
+ return 0;
+ }
+
+ /* Other clocks that may or may not have ti,bit-shift property */
reg->offset = val;
+ reg->bit = ti_clk_get_legacy_bit_shift(node);
reg->ptr = NULL;
return 0;
}
+/**
+ * ti_clk_get_legacy_bit_shift - get bit shift for a clock register
+ * @node: device node for the clock
+ *
+ * Gets the clock register bit shift using the legacy ti,bit-shift
+ * property. Only needed for legacy clock, and can be eventually
+ * dropped once all the composite clocks use a clksel node with a
+ * proper reg property.
+ */
+int ti_clk_get_legacy_bit_shift(struct device_node *node)
+{
+ int err;
+ u32 val;
+
+ err = of_property_read_u32(node, "ti,bit-shift", &val);
+ if (!err && in_range(val, 0, 32))
+ return val;
+
+ return 0;
+}
+
void ti_clk_latch(struct clk_omap_reg *reg, s8 shift)
{
u32 latch;
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 16a9f7c..2de7ace 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -216,6 +216,7 @@
int ti_clk_get_reg_addr(struct device_node *node, int index,
struct clk_omap_reg *reg);
+int ti_clk_get_legacy_bit_shift(struct device_node *node);
void ti_dt_clocks_register(struct ti_dt_clk *oclks);
int ti_clk_retry_init(struct device_node *node, void *user,
ti_of_clk_init_cb_t func);
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index 5d5bb12..ade99ab 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -477,10 +477,7 @@
if (ret)
return ret;
- if (!of_property_read_u32(node, "ti,bit-shift", &val))
- div->shift = val;
- else
- div->shift = 0;
+ div->shift = div->reg.bit;
if (!of_property_read_u32(node, "ti,latch-bit", &val))
div->latch = val;
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index 8e477d5..a9febd6 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -132,7 +132,6 @@
struct clk_omap_reg reg;
const char *name;
u8 enable_bit = 0;
- u32 val;
u32 flags = 0;
u8 clk_gate_flags = 0;
@@ -140,8 +139,7 @@
if (ti_clk_get_reg_addr(node, 0, ®))
return;
- if (!of_property_read_u32(node, "ti,bit-shift", &val))
- enable_bit = val;
+ enable_bit = reg.bit;
}
if (of_clk_get_parent_count(node) != 1) {
@@ -170,7 +168,6 @@
const struct clk_hw_omap_ops *hw_ops)
{
struct clk_hw_omap *gate;
- u32 val = 0;
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
@@ -179,9 +176,7 @@
if (ti_clk_get_reg_addr(node, 0, &gate->enable_reg))
goto cleanup;
- of_property_read_u32(node, "ti,bit-shift", &val);
-
- gate->enable_bit = val;
+ gate->enable_bit = gate->enable_reg.bit;
gate->ops = hw_ops;
if (!ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE))
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
index 172301c..3eb35c8 100644
--- a/drivers/clk/ti/interface.c
+++ b/drivers/clk/ti/interface.c
@@ -66,13 +66,11 @@
struct clk_omap_reg reg;
u8 enable_bit = 0;
const char *name;
- u32 val;
if (ti_clk_get_reg_addr(node, 0, ®))
return;
- if (!of_property_read_u32(node, "ti,bit-shift", &val))
- enable_bit = val;
+ enable_bit = reg.bit;
parent_name = of_clk_get_parent_name(node, 0);
if (!parent_name) {
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
index 1ebafa3..216d85d 100644
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -189,7 +189,7 @@
if (ti_clk_get_reg_addr(node, 0, ®))
goto cleanup;
- of_property_read_u32(node, "ti,bit-shift", &shift);
+ shift = reg.bit;
of_property_read_u32(node, "ti,latch-bit", &latch);
@@ -252,7 +252,6 @@
{
struct clk_omap_mux *mux;
unsigned int num_parents;
- u32 val;
mux = kzalloc(sizeof(*mux), GFP_KERNEL);
if (!mux)
@@ -261,8 +260,7 @@
if (ti_clk_get_reg_addr(node, 0, &mux->reg))
goto cleanup;
- if (!of_property_read_u32(node, "ti,bit-shift", &val))
- mux->shift = val;
+ mux->shift = mux->reg.bit;
if (of_property_read_bool(node, "ti,index-starts-at-one"))
mux->flags |= CLK_MUX_INDEX_ONE;
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index ccd59dd..85b27c4 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -66,6 +66,15 @@
This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
BCM7216.
+config RESET_GPIO
+ tristate "GPIO reset controller"
+ help
+ This enables a generic reset controller for resets attached via
+ GPIOs. Typically for OF platforms this driver expects "reset-gpios"
+ property.
+
+ If compiled as module, it will be called reset-gpio.
+
config RESET_HSDK
bool "Synopsys HSDK Reset Driver"
depends on HAS_IOMEM
@@ -213,7 +222,7 @@
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
- default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+ default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_SOPHGO || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
depends on HAS_IOMEM
help
This enables a simple reset controller driver for reset lines that
@@ -228,6 +237,7 @@
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- SiFive FU740 SoCs
+ - Sophgo SoCs
config RESET_SOCFPGA
bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 8270da8..fd8b49f 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o
obj-$(CONFIG_RESET_BRCMSTB_RESCAL) += reset-brcmstb-rescal.o
+obj-$(CONFIG_RESET_GPIO) += reset-gpio.o
obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 4d5a78d..dba74e8 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -5,14 +5,19 @@
* Copyright 2013 Philipp Zabel, Pengutronix
*/
#include <linux/atomic.h>
+#include <linux/cleanup.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/kref.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/idr.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/acpi.h>
+#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
@@ -23,6 +28,11 @@
static DEFINE_MUTEX(reset_lookup_mutex);
static LIST_HEAD(reset_lookup_list);
+/* Protects reset_gpio_lookup_list */
+static DEFINE_MUTEX(reset_gpio_lookup_mutex);
+static LIST_HEAD(reset_gpio_lookup_list);
+static DEFINE_IDA(reset_gpio_ida);
+
/**
* struct reset_control - a reset control
* @rcdev: a pointer to the reset controller device
@@ -63,6 +73,16 @@
struct reset_control *rstc[] __counted_by(num_rstcs);
};
+/**
+ * struct reset_gpio_lookup - lookup key for ad-hoc created reset-gpio devices
+ * @of_args: phandle to the reset controller with all the args like GPIO number
+ * @list: list entry for the reset_gpio_lookup_list
+ */
+struct reset_gpio_lookup {
+ struct of_phandle_args of_args;
+ struct list_head list;
+};
+
static const char *rcdev_name(struct reset_controller_dev *rcdev)
{
if (rcdev->dev)
@@ -71,6 +91,9 @@
if (rcdev->of_node)
return rcdev->of_node->full_name;
+ if (rcdev->of_args)
+ return rcdev->of_args->np->full_name;
+
return NULL;
}
@@ -99,6 +122,9 @@
*/
int reset_controller_register(struct reset_controller_dev *rcdev)
{
+ if (rcdev->of_node && rcdev->of_args)
+ return -EINVAL;
+
if (!rcdev->of_xlate) {
rcdev->of_reset_n_cells = 1;
rcdev->of_xlate = of_reset_simple_xlate;
@@ -813,12 +839,171 @@
kref_put(&rstc->refcnt, __reset_control_release);
}
+static int __reset_add_reset_gpio_lookup(int id, struct device_node *np,
+ unsigned int gpio,
+ unsigned int of_flags)
+{
+ const struct fwnode_handle *fwnode = of_fwnode_handle(np);
+ unsigned int lookup_flags;
+ const char *label_tmp;
+
+ /*
+ * Later we map GPIO flags between OF and Linux, however not all
+ * constants from include/dt-bindings/gpio/gpio.h and
+ * include/linux/gpio/machine.h match each other.
+ */
+ if (of_flags > GPIO_ACTIVE_LOW) {
+ pr_err("reset-gpio code does not support GPIO flags %u for GPIO %u\n",
+ of_flags, gpio);
+ return -EINVAL;
+ }
+
+ struct gpio_device *gdev __free(gpio_device_put) = gpio_device_find_by_fwnode(fwnode);
+ if (!gdev)
+ return -EPROBE_DEFER;
+
+ label_tmp = gpio_device_get_label(gdev);
+ if (!label_tmp)
+ return -EINVAL;
+
+ char *label __free(kfree) = kstrdup(label_tmp, GFP_KERNEL);
+ if (!label)
+ return -ENOMEM;
+
+ /* Size: one lookup entry plus sentinel */
+ struct gpiod_lookup_table *lookup __free(kfree) = kzalloc(struct_size(lookup, table, 2),
+ GFP_KERNEL);
+ if (!lookup)
+ return -ENOMEM;
+
+ lookup->dev_id = kasprintf(GFP_KERNEL, "reset-gpio.%d", id);
+ if (!lookup->dev_id)
+ return -ENOMEM;
+
+ lookup_flags = GPIO_PERSISTENT;
+ lookup_flags |= of_flags & GPIO_ACTIVE_LOW;
+ lookup->table[0] = GPIO_LOOKUP(no_free_ptr(label), gpio, "reset",
+ lookup_flags);
+
+ /* Not freed on success, because it is persisent subsystem data. */
+ gpiod_add_lookup_table(no_free_ptr(lookup));
+
+ return 0;
+}
+
+/*
+ * @args: phandle to the GPIO provider with all the args like GPIO number
+ */
+static int __reset_add_reset_gpio_device(const struct of_phandle_args *args)
+{
+ struct reset_gpio_lookup *rgpio_dev;
+ struct platform_device *pdev;
+ int id, ret;
+
+ /*
+ * Currently only #gpio-cells=2 is supported with the meaning of:
+ * args[0]: GPIO number
+ * args[1]: GPIO flags
+ * TODO: Handle other cases.
+ */
+ if (args->args_count != 2)
+ return -ENOENT;
+
+ /*
+ * Registering reset-gpio device might cause immediate
+ * bind, resulting in its probe() registering new reset controller thus
+ * taking reset_list_mutex lock via reset_controller_register().
+ */
+ lockdep_assert_not_held(&reset_list_mutex);
+
+ mutex_lock(&reset_gpio_lookup_mutex);
+
+ list_for_each_entry(rgpio_dev, &reset_gpio_lookup_list, list) {
+ if (args->np == rgpio_dev->of_args.np) {
+ if (of_phandle_args_equal(args, &rgpio_dev->of_args))
+ goto out; /* Already on the list, done */
+ }
+ }
+
+ id = ida_alloc(&reset_gpio_ida, GFP_KERNEL);
+ if (id < 0) {
+ ret = id;
+ goto err_unlock;
+ }
+
+ /* Not freed on success, because it is persisent subsystem data. */
+ rgpio_dev = kzalloc(sizeof(*rgpio_dev), GFP_KERNEL);
+ if (!rgpio_dev) {
+ ret = -ENOMEM;
+ goto err_ida_free;
+ }
+
+ ret = __reset_add_reset_gpio_lookup(id, args->np, args->args[0],
+ args->args[1]);
+ if (ret < 0)
+ goto err_kfree;
+
+ rgpio_dev->of_args = *args;
+ /*
+ * We keep the device_node reference, but of_args.np is put at the end
+ * of __of_reset_control_get(), so get it one more time.
+ * Hold reference as long as rgpio_dev memory is valid.
+ */
+ of_node_get(rgpio_dev->of_args.np);
+ pdev = platform_device_register_data(NULL, "reset-gpio", id,
+ &rgpio_dev->of_args,
+ sizeof(rgpio_dev->of_args));
+ ret = PTR_ERR_OR_ZERO(pdev);
+ if (ret)
+ goto err_put;
+
+ list_add(&rgpio_dev->list, &reset_gpio_lookup_list);
+
+out:
+ mutex_unlock(&reset_gpio_lookup_mutex);
+
+ return 0;
+
+err_put:
+ of_node_put(rgpio_dev->of_args.np);
+err_kfree:
+ kfree(rgpio_dev);
+err_ida_free:
+ ida_free(&reset_gpio_ida, id);
+err_unlock:
+ mutex_unlock(&reset_gpio_lookup_mutex);
+
+ return ret;
+}
+
+static struct reset_controller_dev *__reset_find_rcdev(const struct of_phandle_args *args,
+ bool gpio_fallback)
+{
+ struct reset_controller_dev *rcdev;
+
+ lockdep_assert_held(&reset_list_mutex);
+
+ list_for_each_entry(rcdev, &reset_controller_list, list) {
+ if (gpio_fallback) {
+ if (rcdev->of_args && of_phandle_args_equal(args,
+ rcdev->of_args))
+ return rcdev;
+ } else {
+ if (args->np == rcdev->of_node)
+ return rcdev;
+ }
+ }
+
+ return NULL;
+}
+
struct reset_control *
__of_reset_control_get(struct device_node *node, const char *id, int index,
bool shared, bool optional, bool acquired)
{
+ bool gpio_fallback = false;
struct reset_control *rstc;
- struct reset_controller_dev *r, *rcdev;
+ struct reset_controller_dev *rcdev;
struct of_phandle_args args;
int rstc_id;
int ret;
@@ -839,39 +1024,52 @@
index, &args);
if (ret == -EINVAL)
return ERR_PTR(ret);
- if (ret)
- return optional ? NULL : ERR_PTR(ret);
+ if (ret) {
+ if (!IS_ENABLED(CONFIG_RESET_GPIO))
+ return optional ? NULL : ERR_PTR(ret);
- mutex_lock(&reset_list_mutex);
- rcdev = NULL;
- list_for_each_entry(r, &reset_controller_list, list) {
- if (args.np == r->of_node) {
- rcdev = r;
- break;
+ /*
+ * There can be only one reset-gpio for regular devices, so
+ * don't bother with the "reset-gpios" phandle index.
+ */
+ ret = of_parse_phandle_with_args(node, "reset-gpios", "#gpio-cells",
+ 0, &args);
+ if (ret)
+ return optional ? NULL : ERR_PTR(ret);
+
+ gpio_fallback = true;
+
+ ret = __reset_add_reset_gpio_device(&args);
+ if (ret) {
+ rstc = ERR_PTR(ret);
+ goto out_put;
}
}
+ mutex_lock(&reset_list_mutex);
+ rcdev = __reset_find_rcdev(&args, gpio_fallback);
if (!rcdev) {
rstc = ERR_PTR(-EPROBE_DEFER);
- goto out;
+ goto out_unlock;
}
if (WARN_ON(args.args_count != rcdev->of_reset_n_cells)) {
rstc = ERR_PTR(-EINVAL);
- goto out;
+ goto out_unlock;
}
rstc_id = rcdev->of_xlate(rcdev, &args);
if (rstc_id < 0) {
rstc = ERR_PTR(rstc_id);
- goto out;
+ goto out_unlock;
}
/* reset_list_mutex also protects the rcdev's reset_control list */
rstc = __reset_control_get_internal(rcdev, rstc_id, shared, acquired);
-out:
+out_unlock:
mutex_unlock(&reset_list_mutex);
+out_put:
of_node_put(args.np);
return rstc;
diff --git a/drivers/reset/reset-gpio.c b/drivers/reset/reset-gpio.c
new file mode 100644
index 0000000..2290b25
--- /dev/null
+++ b/drivers/reset/reset-gpio.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+struct reset_gpio_priv {
+ struct reset_controller_dev rc;
+ struct gpio_desc *reset;
+};
+
+static inline struct reset_gpio_priv
+*rc_to_reset_gpio(struct reset_controller_dev *rc)
+{
+ return container_of(rc, struct reset_gpio_priv, rc);
+}
+
+static int reset_gpio_assert(struct reset_controller_dev *rc, unsigned long id)
+{
+ struct reset_gpio_priv *priv = rc_to_reset_gpio(rc);
+
+ gpiod_set_value_cansleep(priv->reset, 1);
+
+ return 0;
+}
+
+static int reset_gpio_deassert(struct reset_controller_dev *rc,
+ unsigned long id)
+{
+ struct reset_gpio_priv *priv = rc_to_reset_gpio(rc);
+
+ gpiod_set_value_cansleep(priv->reset, 0);
+
+ return 0;
+}
+
+static int reset_gpio_status(struct reset_controller_dev *rc, unsigned long id)
+{
+ struct reset_gpio_priv *priv = rc_to_reset_gpio(rc);
+
+ return gpiod_get_value_cansleep(priv->reset);
+}
+
+static const struct reset_control_ops reset_gpio_ops = {
+ .assert = reset_gpio_assert,
+ .deassert = reset_gpio_deassert,
+ .status = reset_gpio_status,
+};
+
+static int reset_gpio_of_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ return reset_spec->args[0];
+}
+
+static void reset_gpio_of_node_put(void *data)
+{
+ of_node_put(data);
+}
+
+static int reset_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct of_phandle_args *platdata = dev_get_platdata(dev);
+ struct reset_gpio_priv *priv;
+ int ret;
+
+ if (!platdata)
+ return -EINVAL;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, &priv->rc);
+
+ priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->reset))
+ return dev_err_probe(dev, PTR_ERR(priv->reset),
+ "Could not get reset gpios\n");
+
+ priv->rc.ops = &reset_gpio_ops;
+ priv->rc.owner = THIS_MODULE;
+ priv->rc.dev = dev;
+ priv->rc.of_args = platdata;
+ ret = devm_add_action_or_reset(dev, reset_gpio_of_node_put,
+ priv->rc.of_node);
+ if (ret)
+ return ret;
+
+ /* Cells to match GPIO specifier, but it's not really used */
+ priv->rc.of_reset_n_cells = 2;
+ priv->rc.of_xlate = reset_gpio_of_xlate;
+ priv->rc.nr_resets = 1;
+
+ return devm_reset_controller_register(dev, &priv->rc);
+}
+
+static const struct platform_device_id reset_gpio_ids[] = {
+ { .name = "reset-gpio", },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, reset_gpio_ids);
+
+static struct platform_driver reset_gpio_driver = {
+ .probe = reset_gpio_probe,
+ .id_table = reset_gpio_ids,
+ .driver = {
+ .name = "reset-gpio",
+ },
+};
+module_platform_driver(reset_gpio_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>");
+MODULE_DESCRIPTION("Generic GPIO reset driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index 818cabc..2760678 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -151,6 +151,8 @@
{ .compatible = "snps,dw-high-reset" },
{ .compatible = "snps,dw-low-reset",
.data = &reset_simple_active_low },
+ { .compatible = "sophgo,sg2042-reset",
+ .data = &reset_simple_active_low },
{ /* sentinel */ },
};
diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index 1d2b27e..b811446e 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -523,7 +523,7 @@
struct qbman_eq_desc *ed;
int i, ret;
- ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
+ ed = kcalloc(32, sizeof(struct qbman_eq_desc), GFP_KERNEL);
if (!ed)
return -ENOMEM;
diff --git a/include/dt-bindings/reset/sophgo,sg2042-reset.h b/include/dt-bindings/reset/sophgo,sg2042-reset.h
new file mode 100644
index 0000000..9ab0980
--- /dev/null
+++ b/include/dt-bindings/reset/sophgo,sg2042-reset.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Technology Inc. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_RESET_SOPHGO_SG2042_H_
+#define __DT_BINDINGS_RESET_SOPHGO_SG2042_H_
+
+#define RST_MAIN_AP 0
+#define RST_RISCV_CPU 1
+#define RST_RISCV_LOW_SPEED_LOGIC 2
+#define RST_RISCV_CMN 3
+#define RST_HSDMA 4
+#define RST_SYSDMA 5
+#define RST_EFUSE0 6
+#define RST_EFUSE1 7
+#define RST_RTC 8
+#define RST_TIMER 9
+#define RST_WDT 10
+#define RST_AHB_ROM0 11
+#define RST_AHB_ROM1 12
+#define RST_I2C0 13
+#define RST_I2C1 14
+#define RST_I2C2 15
+#define RST_I2C3 16
+#define RST_GPIO0 17
+#define RST_GPIO1 18
+#define RST_GPIO2 19
+#define RST_PWM 20
+#define RST_AXI_SRAM0 21
+#define RST_AXI_SRAM1 22
+#define RST_SF0 23
+#define RST_SF1 24
+#define RST_LPC 25
+#define RST_ETH0 26
+#define RST_EMMC 27
+#define RST_SD 28
+#define RST_UART0 29
+#define RST_UART1 30
+#define RST_UART2 31
+#define RST_UART3 32
+#define RST_SPI0 33
+#define RST_SPI1 34
+#define RST_DBG_I2C 35
+#define RST_PCIE0 36
+#define RST_PCIE1 37
+#define RST_DDR0 38
+#define RST_DDR1 39
+#define RST_DDR2 40
+#define RST_DDR3 41
+#define RST_FAU0 42
+#define RST_FAU1 43
+#define RST_FAU2 44
+#define RST_RXU0 45
+#define RST_RXU1 46
+#define RST_RXU2 47
+#define RST_RXU3 48
+#define RST_RXU4 49
+#define RST_RXU5 50
+#define RST_RXU6 51
+#define RST_RXU7 52
+#define RST_RXU8 53
+#define RST_RXU9 54
+#define RST_RXU10 55
+#define RST_RXU11 56
+#define RST_RXU12 57
+#define RST_RXU13 58
+#define RST_RXU14 59
+#define RST_RXU15 60
+#define RST_RXU16 61
+#define RST_RXU17 62
+#define RST_RXU18 63
+#define RST_RXU19 64
+#define RST_RXU20 65
+#define RST_RXU21 66
+#define RST_RXU22 67
+#define RST_RXU23 68
+#define RST_RXU24 69
+#define RST_RXU25 70
+#define RST_RXU26 71
+#define RST_RXU27 72
+#define RST_RXU28 73
+#define RST_RXU29 74
+#define RST_RXU30 75
+#define RST_RXU31 76
+
+#endif /* __DT_BINDINGS_RESET_SOPHGO_SG2042_H_ */
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index cbfcbf1..e656f63 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -13,11 +13,14 @@
/**
* struct clk_omap_reg - OMAP register declaration
* @offset: offset from the master IP module base address
+ * @bit: register bit offset
* @index: index of the master IP module
+ * @flags: flags
*/
struct clk_omap_reg {
void __iomem *ptr;
u16 offset;
+ u8 bit;
u8 index;
u8 flags;
};
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 836d575..9956afb 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -1141,8 +1141,7 @@
if (ret < 0)
continue;
- if (pargs->np == args.np && pargs->args_count == args.args_count &&
- !memcmp(pargs->args, args.args, sizeof(args.args[0]) * args.args_count))
+ if (of_phandle_args_equal(pargs, &args))
cpumask_set_cpu(cpu, cpumask);
of_node_put(args.np);
diff --git a/include/linux/of.h b/include/linux/of.h
index df702b2..a0bedd03 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -1084,6 +1084,22 @@
}
/**
+ * of_phandle_args_equal() - Compare two of_phandle_args
+ * @a1: First of_phandle_args to compare
+ * @a2: Second of_phandle_args to compare
+ *
+ * Return: True if a1 and a2 are the same (same node pointer, same phandle
+ * args), false otherwise.
+ */
+static inline bool of_phandle_args_equal(const struct of_phandle_args *a1,
+ const struct of_phandle_args *a2)
+{
+ return a1->np == a2->np &&
+ a1->args_count == a2->args_count &&
+ !memcmp(a1->args, a2->args, sizeof(a1->args[0]) * a1->args_count);
+}
+
+/**
* of_property_count_u8_elems - Count the number of u8 elements in a property
*
* @np: device node from which the property value is to be read.
diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
index 0fa4f60..357df16 100644
--- a/include/linux/reset-controller.h
+++ b/include/linux/reset-controller.h
@@ -60,6 +60,9 @@
* @reset_control_head: head of internal list of requested reset controls
* @dev: corresponding driver model device struct
* @of_node: corresponding device tree node as phandle target
+ * @of_args: for reset-gpios controllers: corresponding phandle args with
+ * of_node and GPIO number complementing of_node; either this or
+ * of_node should be present
* @of_reset_n_cells: number of cells in reset line specifiers
* @of_xlate: translation function to translate from specifier as found in the
* device tree to id as given to the reset control ops, defaults
@@ -73,6 +76,7 @@
struct list_head reset_control_head;
struct device *dev;
struct device_node *of_node;
+ const struct of_phandle_args *of_args;
int of_reset_n_cells;
int (*of_xlate)(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec);
